Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-18

P-K-GCN: Physics-augmented Koopman-enhanced Graph Convolutional Network for Deep Spatiotemporal Super-resolution

arXiv:2606.19303v1 Announce Type: new Abstract: High-fidelity simulation of spatiotemporal dynamics is computationally prohibitive, necessitating efficient super-resolution techniques to reconstruct high-resolution data from coarse-grained inputs. Traditional data-driven methods often lack physical constraints, and simple physics-informed learning struggles with irregular spatial geometries and intricately evolving temporal dynamics. To tackle these challenges, we propose a Physics-augmented Koopman-enhanced Graph Convolutional Network (P-K-GCN) for spatiotemporal super-resolution on irregular geometries. Specifically, a continuous spline-based GCN is first designed to extract spatial dependencies directly from coarse graph, and Koopman operator theory is incorporated to project the nonlinear dynamics into a compact latent space where temporal progression is linearized. Second, we augment the optimization objective with a physics-based loss to force the data-driven reconstructions to adhere to physical laws for improving predictive fidelity and robustness. Finally, we provide a rigorous theoretical analysis, establishing that the physics augmentation and Koopman regularization mathematically guarantees a reduction in super-resolution error by diminishing Rademacher complexity and tightening generalization bounds. We evaluate our framework on reconstructing spatially high-resolution cardiac electrodynamics across a 3D heart geometry from sparse low-resolution measurements. Numerical experiments demonstrate that our method achieves superior accuracy compared to baseline models.

02.
arXiv (CS.AI) 2026-06-16

Decision-Weighted Flow Matching for Contextual Stochastic Optimization

arXiv:2606.16790v1 Announce Type: cross Abstract: Conditional generative models are increasingly used as scenario generators for stochastic optimization, but standard training objectives emphasize uniform distributional fit rather than the downstream decisions induced by generated scenarios. This creates an objective mismatch: errors in statistically common regions may have little effect on decision regret, whereas errors in decision-sensitive regions can substantially change the optimal action. We propose Decision-Weighted Flow Matching (DW-FM), a regret-aligned training framework that preserves the simplicity of standard flow matching while reweighting its velocity-regression objective using decision-sensitive endpoint information. Theoretically, we connect downstream regret to pathwise velocity mismatch through a loss-induced decision discrepancy and an adjoint transport argument, yielding an ideal regret-aligned surrogate and practical endpoint-weighted objectives with regret guarantees. Empirically, we demonstrate the effectiveness of DW-FM on three CVaR-based contextual stochastic optimization benchmarks spanning synthetic portfolio, semi-real financial, and traffic-CVaR tasks, where DW-FM improves downstream regret over standard baselines.

03.
arXiv (CS.CL) 2026-06-16

Building Customer Support AI Agents at 100M-User Scale: An Evaluation-Driven Framework

The rapid rise in LLM capabilities has made AI agents increasingly viable across a broad range of tasks. Among the most promising applications is building production-ready customer-facing agents, a challenge that demands coordinated excellence in evaluation methodology, context engineering, training, and online measurement. Yet these critical pillars are typically developed in isolation, creating blind spots that only surface after deployment. In this paper, we present a unified framework that bridges offline development with online impact for customer support AI agents at Nubank, a company with 100M+ users. Our approach integrates several key components: (1) structured context engineering tailored to customer support agents, (2) systematic human-in-the-loop prompt iteration, (3) rigorous LLM judge evaluation with measured inter-rater agreement and GEPA optimization for consistency, and (4) ideation-to-production validation. A central insight is that evaluation-pipeline quality directly determines iteration velocity. We present results from five production deployments spanning distinct domains: card delivery, debt management, credit-limit support, card management, and product explanation. These deployments deliver consistent customer-satisfaction gains while substantially accelerating iteration. In our card-delivery deployment, large-scale A/B testing yields a 37 percentage-point improvement in AI transactional Net Promoter Score and a 29 percentage-point gain in self-service rate over prior agent variants, alongside a strong correlation between offline simulation metrics and online outcomes, demonstrating that eval-driven development reliably predicts production impact. On most use cases, AI satisfaction reaches within a few percentage points of expert human agents.

04.
arXiv (CS.CV) 2026-06-16

CheXGenBench: A Unified Benchmark For Fidelity, Privacy and Utility of Synthetic Chest Radiographs

Structured benchmarks have advanced text-conditional image generation for real-world imagery, however, no such benchmark exists for synthetic radiograph generation. Despite being a highly active area of research, existing studies continue adopting inconsistent evaluation protocols and lack a unified assessment of the three most critical criteria: generative fidelity, privacy risk, and downstream utility. To address these limitations, we introduce CheXGenBench, the first unified evaluation framework for synthetic chest radiograph generation that simultaneously assesses fidelity, privacy risks, and downstream utility across frontier text-to-image (T2I) generative models. Our evaluation protocol, comprising over 20 quantitative metrics, covers 11 leading T2I architectures with plug-and-play integration for newer models. Through a rigorous and fair evaluation protocol, we establish comprehensive baseline state-of-the-art (SoTA) performances across all dimensions to guide future research. Furthermore, our results uncover several limitations of current generative models, which include first, even SoTA models struggle with long-tailed medical distributions; second, models pose high privacy risks regardless of fidelity quality; and third, while synthetic data already benefits downstream classification, it is of limited utility for downstream multimodal tasks. Drawing from these results, we propose concrete research directions to advance the field. The code is available at https://github.com/Raman1121/CheXGenBench

05.
arXiv (CS.CL) 2026-06-11

Fine-tuning Multi-modal LLMs with ART: Art-based Reinforcement Training

There are two main Parameter-Efficient Fine-Tuning (PEFT) techniques for Large Language Models (LLMs). While Low-Rank Adaptation (LoRA) introduces additional weights between the LLM layers, Soft Prompting introduces additional fine-tuning-specific raw tokens to an LLM input. However, both require modification to the computational graphs of precompiled, preoptimized LLMs. As a result, neither is fully supported in high-throughput engines like vLLM. We propose fine-tuning with ART (Art-based Reinforcement Training). The method injects information into a frozen Multimodal Large Language Model (MLLM) by optimizing only its raw visual input, thus enabling the soft-token approach on pre-compiled computational graphs. It relies on backpropagation of gradients back into a plain pixel array and thus supports any fine-tuning objective. Moreover, the optimized visual input can be stylized as task-relevant computational artworks. The approach's effectiveness is confirmed for different sizes of a popular open Qwen architecture and for several textual benchmarks. Specifically, ART reaches accuracy competitive with LoRA across mathematics and structured-tool-use benchmarks.

06.
arXiv (CS.LG) 2026-06-11

Recursive Binding on a Budget: Subspace Carving in Order-p Tensor Memories

arXiv:2606.11391v1 Announce Type: new Abstract: Tensor Product Representations provide the structural fidelity required for symbolic reasoning in models but suffer from exponential dimensionality growth when encoding deep recursive structures. Conversely, Vector Symbolic Architectures maintain constant dimensionality but sacrifice capacity and fidelity due to noisy compression via superposition. In this work, we propose Orthogonal Subspace Carving (OSC), a memory architecture that binds fillers to roles by projecting onto the null space of the role basis before aggregating into a fixed order-p tensor. OSC uses projections to enforce geometric orthogonality between bound structures within a static memory trace. We show that this mechanism decouples the tensor order from the structural depth, enabling deep recursive binding within a constant memory footprint. By performing retrieval via recognition, this construction allows for component vectors that are orders of magnitude smaller than the memory tensor, giving superior memory efficiency in settings involving high superposition. We also show that TPR is a special case of binding in Clifford algebra, and give a Clifford formulation of OSC.

07.
arXiv (quant-ph) 2026-06-11

Quantum optimal control of the Dicke manifold in dipolar Rydberg atom arrays

arXiv:2606.02283v2 Announce Type: replace Abstract: The ability to engineer and control quantum states of many-body systems is a central challenge in quantum information science. For a register of $N$ qubits, the full Hilbert space dimension grows exponentially as $2^N$, rendering generic state preparation and control infeasible without exploiting structure or symmetry. A particularly important and physically motivated restriction is to the fully symmetric subspace, spanned by the Dicke states, which are simultaneous eigenstates of collective spin $J=N/2$. Ensembles of Rydberg atoms interacting via electric dipoles in two-dimensional tweezer arrays form a promising platform for achieving such control. However, the finite range of dipole-dipole interactions poses a challenge to generating and controlling the Dicke manifold because the Hamiltonian incurs leakage from the computational subspace. To counteract this leakage, we perform quantum optimal control algorithms on a truncated Hilbert space according to our newly developed method of ``irrep distillation'' (IRD), which captures the process by which the symmetric subspace couples to leakage error-spaces, using only linear-scaling Hilbert dimension. We implement gradient ascent pulse engineering (GrAPE) on control schemes with little or no local addressing, to generate resourceful states like Greenberger-Horne-Zeilinger, Dicke, and extremal quantum states. We benchmark each scheme of IRD-GrAPE for its quantum speed limit (QSL), as well as exactly testing pulse fidelities on small system sizes and predicting fidelities using higher-order IRD on larger systems.

08.
arXiv (CS.AI) 2026-06-16

Beyond Correctness: Enhancing Architectural Reasoning in Code LLMs via Scalable Labeling with Agentic Judgment

arXiv:2606.14948v1 Announce Type: cross Abstract: LLMs have substantially improved software engineering yet real-world development requires architectural understanding. Such understanding is prohibitively expensive to label manually and impossible to verify through tests alone. We propose an agentic judging pipeline using a strong LLM as a scalable proxy for expert architectural evaluation, comprising two judges: the Architecture Complexity Judge (ACJ), which estimates codebase-specific architectural understanding a task demands, and the Architecture Quality Judge (AQJ), which evaluates patch conformance to repository-specific architectural conventions via source-grounded rubrics. Fine-tuning Qwen3-8B/14B/32B on 3,360 curated instances achieves resolved rates of up to 27.2% on SWE-bench Verified - up to 540% over the base model and 256% over unfiltered fine-tuning. Meanwhile, the trained models achieve strong cross-language generalization and consistent improvements in architectural patch quality.

09.
medRxiv (Medicine) 2026-06-15

Toward a National Registry for Inborn Errors of Immunity in Peru: A Qualitative Implementation Study

Background: Peru lacks an integrated information system for patients with Inborn Errors of Immunity (IEI). Although disease registries are essential tools for data management and health planning, their success depends on implementation science approaches that account for local contextual factors. This study reports Phase I of a three-phase mixed-methods implementation project to design and develop a national IEI registry. Methods: Phase I consisted of a phenomenological qualitative study exploring stakeholder perspectives. Semi-structured focus groups and in-depth interviews were conducted with 29 key stakeholders across four groups: policy-makers, clinical experts, end-users (immunologists, residents, allied health personnel), and patient organization representatives. Interviews followed a guide structured around four a priori domains (structure, navigation, feasibility, and perception of existing systems). Discussions were conducted in Spanish, audio-recorded, transcribed verbatim, and coded using ATLAS.ti. A hybrid thematic analysis combining deductive and inductive coding was performed. Data elements proposed for the registry were triangulated with qualitative findings. Results: Thirty-six initial codes were consolidated into 15 categories, which were further integrated into four overarching themes conceptualized as pathways toward intention to use: (1) Environment, where governance, regulatory backing, and sustainable financing were identified as key enablers, while limited interoperability emerged as a structural barrier; (2) Technical Dimension, emphasizing usability, alignment with clinical workflow, and a hierarchical data architecture (demographic, clinical, therapeutic); (3) Users, highlighting clinical leadership, protected time, digital readiness, and perceived usefulness as stronger motivators than financial incentives; and (4) Patients, underscoring data protection, transparency, trust, and advocacy as essential for legitimacy and sustainability. Conclusions: A national IEI registry in Peru is perceived as necessary and feasible if implemented with strong regulatory foundations, interoperable design, robust data security, and user-centered architecture. These findings informed the development of an initial functional prototype and the operational plan for Phase II, focused on usability evaluation.

10.
arXiv (CS.LG) 2026-06-19

ADaPT: Token-Level Decoupling for Efficient Large Reasoning Models

arXiv:2606.19919v1 Announce Type: new Abstract: Large reasoning models rely on long chain-of-thought to achieve strong performance, but applying such reasoning uniformly incurs high computational cost. Existing efficiency-oriented methods attempt to shorten or mix reasoning strategies, yet often degrade reasoning capability. We identify the root cause as sequence-level coupling between efficiency incentives and correctness optimization, which implicitly penalizes long but correct reasoning trajectories. To address this issue, we propose Adaptive Dual-Process Thinking (ADaPT), a token-level dual-process framework that explicitly decouples efficiency and correctness signals during training. ADaPT introduces a mode-selection token to control fast and slow reasoning, applying efficiency-related rewards exclusively to this token to avoid penalizing correct long reasoning while encouraging efficiency when appropriate. Moreover, ADaPT enables precise and continuous control over the efficiency-performance trade-off at inference time: by adjusting the generation probability of the mode-selection token, a single trained model can smoothly move along the efficiency-performance Pareto frontier. Extensive experiments demonstrate that ADaPT significantly reduces inference cost while maintaining strong reasoning performance across multiple benchmarks.

11.
arXiv (CS.AI) 2026-06-15

A Comparative Study of Deep Learning Architectures for Multi-Horizon Behavioural Forecasting for Mobile Health

arXiv:2606.14604v1 Announce Type: cross Abstract: Wearable devices and smartphones generate rich behavioural time series that can support proactive health interventions, yet systematic comparisons of modern forecasting architectures for these data are lacking. In particular, it remains unclear how models generalise across populations, how different architectures respond to participant-level fine-tuning and how forecasting accuracy degrades across multi-day horizons. We benchmark six deep learning architectures, two zero-shot Foundation Models (FM) and statistical baselines on three public datasets encompassing over 800 participants, reporting per-feature metrics for step counts, screen time and sleep duration across 1-8 day horizons. We further conduct a per-feature personalisation study across all six architectures and assess FM transferability across dataset sizes and temporal granularities. Our key findings are: (i) no single architecture dominates, PatchTST leads among trained models while the three runners-up (TCN, MLP, Transformer) show no meaningful performance difference; (ii) the FM TimesFM matches or exceeds trained models zero-shot, especially in low-data regimes and (iii) participant-level fine-tuning reduces per-feature RMSE by 16-60\%, with sleep benefiting most and step counts least. These results provide practical guidance on architecture selection, FM applicability and personalisation strategies for mobile health forecasting. To the best of our knowledge, this is the first study to jointly evaluate modern deep learning, FMs and personalisation for multi-horizon behavioural forecasting from wearables.

12.
arXiv (CS.CV) 2026-06-16

Trusting Right Predictions for Wrong Reasons: A LIME Based Analysis of Deep Learning Interpretability in Lung Cancer Diagnosis

Lung cancer is the leading cause of cancer-related mortality, with approximately 2.5 million new cases and 1.8 million deaths annually, making reliable diagnosis a clinical priority. Although deep learning models have achieved strong performance in lung cancer classification, evaluation has largely focused on predictive accuracy, leaving their decision-making processes insufficiently examined. This study compares three architecturally distinct models: a Convolutional Neural Network (CNN), a pretrained ResNet50, and a Vision Transformer (ViT), trained on the IQ-OTH/NCCD lung cancer CT dataset. Local Interpretable Model-Agnostic Explanations (LIME) were applied to investigate model reasoning. In addition to standard performance metrics, a dual-correlation framework was introduced to measure both prediction agreement and explanation agreement across model pairs. All three models achieved strong classification performance, with ResNet50 attaining 98.61% accuracy, CNN 97.91%, and ViT 93.75%, while all achieved ROC-AUC scores of 0.99. Prediction correlations exceeded 0.99 across all model pairs, indicating highly consistent outputs. However, LIME explanation correlations remained below 0.26, revealing substantial differences in the image regions used to reach those predictions. Analysis of misclassified samples further identified a consistent spatial pattern: incorrect predictions were associated with attention outside the lung parenchyma, whereas correct predictions focused primarily within lung regions. These findings demonstrate that prediction agreement is a poor proxy for reasoning consistency, and that interpretability evaluation must be treated as an independent validation criterion alongside predictive performance in clinical AI systems.

13.
arXiv (CS.CV) 2026-06-12

High-Fidelity Two-Step Image Generation via Teacher-Aligned End-to-End Distillation

Few-step diffusion distillation has become increasingly mature for 4-8-step generation, yet pushing further to 2 steps remains challenging. In this work, we introduce Z-Image Turbo++, a high-quality 2-step image generation model distilled from the 8-step Z-Image Turbo teacher. Our method addresses the central bottlenecks of increased task difficulty and limited model capacity in 2-step generation through three simple but effective design choices tailored to this regime. First, we propose Distribution-Aligned Adversarial Learning, which uses teacher-generated images rather than external real images as real samples for GAN training, providing a more attainable and informative adversarial target. Second, we adopt Step-Decoupled Parameterization, assigning independent model parameters to the two denoising steps to better match their distinct capacity demands. Third, we perform End-to-End Training with Iterative Regularization, allowing the first step to receive gradients from final image quality while preserving a meaningful intermediate generation through an explicit step-1 loss. Together, these designs substantially narrow the quality gap between 2-step and 8-step generation in both qualitative and quantitative evaluations, highlighting the potential of carefully tailored distillation strategies for improving the quality-efficiency trade-off in few-step generation.

14.
arXiv (quant-ph) 2026-06-15

Spin-orbit coupling by design in quantum state engineering of atomically defined quantum dots

arXiv:2606.14487v1 Announce Type: cross Abstract: Tuning spin-orbit coupling is essential in controlling both spin and charge in confined semiconductor nanostructures, yet it is rarely a truly controllable parameter. Here, we show control over the spin-orbit Hamiltonian in quantum dots and the resulting quantum states by tailoring the confinement potential with atomic-scale precision. Using scanning tunnelling microscopy and spectroscopy, we pattern individual Cs ions into designer quantum dot structures on the surface of indium antimonide, in which electrons from a two-dimensional electron gas are confined with chosen in-plane electric-field gradients. We then quantify the atomic level structure, both spatially resolving the orbital character of the electronic states and their magnetic-field evolution. We demonstrate that the level structure, including the induced zero-field splitting, can be tailored by the designed geometry of the local electric fields. These effects can be described using a Hamiltonian that allows consistent treatment of the confinement-induced spin-orbit coupling beyond the conventional Bychkov-Rashba description. This Hamiltonian is derived from a multiband k.p model and takes the energy dependence of the relevant physical parameters into account. Such precise control of spin-orbit coupling in semiconductor quantum dots is relevant to quantum and spintronic technologies.

15.
arXiv (quant-ph) 2026-06-11

Quantum repeater segment with free-space coupled co-trapped ions using telecom photon interference

arXiv:2606.12313v1 Announce Type: new Abstract: A quantum repeater segment is a basic building block of a quantum repeater, generating buffered entanglement of quantum memories to connect quantum repeater cells. It also enables the connection between quantum computers. In the implementation we present here, photons emitted from two co-trapped free-space coupled $^{40}$Ca$^+$ ions are converted to the telecom-C band and interfered after transmission over 440$\,$m of optical fiber (220$\,$m per arm), where a photonic Bell measurement is performed to create entanglement between the memories. With this scheme we generate an entangled $\left|\Psi^+\right\rangle$ Bell state with $\ge 68(8)\,$% fidelity, highlighting trapped $^{40}$Ca$^+$ ions as a promising quantum repeater hardware platform.

16.
medRxiv (Medicine) 2026-06-11

Beyond External Load: Integrative Immune Monitoring Reveals Injury-Predictive Signals in the Athlete's Internal State

Abstract (already in the PDF; paste if a box is required): Injury risk prediction in elite football relies almost exclusively on external load metrics derived from GPS tracking, overlooking the molecular state of the athlete. We monitored 26 male players from FC Barcelona's first team across the 2025 calendar year, integrating GPS-derived training load with longitudinal blood-based immune monitoring (systemic inflammation and TCR-derived immune age). Immune age acceleration and inflammation were elevated in the 14 days preceding musculoskeletal injuries. A logistic regression model combining external load, inflammation, immune age acceleration, and career injury history reached an overall AUC of 0.678 and a mean per-player AUC of 0.754 (SD 0.146), improving on a GPS-only baseline of 0.541. Applied to 2026 data, the frozen model ranked players who later sustained non-contact musculoskeletal injuries high in the risk distribution. Together, our data suggest multimodal immune monitoring in elite football to reveal the athlete's internal physiological state, which carries injury-relevant information that external load alone does not capture.

17.
arXiv (CS.AI) 2026-06-19

Scaling Generative Foundation Models for Chest Radiography with Rectified Flow Transformers

arXiv:2606.19460v1 Announce Type: cross Abstract: We introduce the first generative foundation model for chest radiograph synthesis trained from scratch at the billion-parameter scale. Existing radiographic AI models often suffer from poor generalisation across patient subpopulations, institutions, and acquisition settings, resulting in limited real-world clinical utility. Controlled, high-fidelity synthesis of chest radiographs is a promising path toward diversifying clinical datasets and evaluating the robustness of diagnostic models. Therefore, we present the largest specialist generative foundation model for chest radiographs to date, with over 1.3B parameters, trained for 1.6T tokens on a curated, heterogeneous dataset comprising 1.2M radiographs and clinical expert-guided metadata. Our model supports controllable radiograph generation and editing across multiple demographic subgroups, acquisition views, and a dozen pathologies. Moreover, we significantly advance the state of the art in radiograph synthesis fidelity, producing images that are indistinguishable from real radiographs to clinical experts.

18.
arXiv (CS.LG) 2026-06-19

Multi-Granular Attention-Driven Reinforcement Learning Framework for Web Intelligent Enhancement Systems

arXiv:2606.19690v1 Announce Type: new Abstract: From the past few years, web intelligent enhancement systems increasingly rely on heterogeneous and dynamic web data to deliver personalized, context-aware services. However, traditional machine learning, deep learning, and reinforcement learning models often struggle with semantic understanding, adaptability, and scalability in continuously evolving web environments. In this research, a Multi-Granular Attention-based Reinforcement Web Intelligent Enhancement System (MGAR-WIES) is proposed to address the challenges by integrating semantic graph modeling, attention mechanisms, and adaptive reinforcement learning. Initially, heterogeneous web data comprising structured, semi-structured and unstructured sources are collected and preprocessed for generating unified feature representations. These representations are transformed into a dynamic semantic graph, where entities and their relationships are modeled by using graph embeddings enhanced by attention mechanisms for capturing both local relevance and global contextual dependencies. Subsequently, an adaptive multi-agent reinforcement learning strategy leverages the attention-aware semantic states to optimize personalized web actions like content recommendation, navigation optimization, and service adaptation. Finally, the continuous online feedback is further integrated to update graph representations and learning policies in real time by ensuring sustained adaptability and performance. The proposed MGAR-WIES acheived better results in terms of accuracy (80%) when compared with existing approaches.

19.
arXiv (CS.CL) 2026-06-19

Learning to Prompt: Improving Student Engagement with Adaptive LLM-based High-School Tutoring

LLMs can personalize education, although current static-prompt tutoring systems struggle to adapt to diverse academic disciplines. We develop and test a system with subject-aware prompting, based on 14 pedagogical features (e.g., tutor scaffolding, student understanding) extracted from raw transcripts. We first train a prompt routing model in a simulation environment, and then deploy it for online adaptation with actual high-school students. The simulation benchmark shows the router outperforming two static baselines ($0.694$ vs. $0.647$ and $0.64$, $p

20.
arXiv (CS.AI) 2026-06-12

Fantastic Scientific Agents and How to Build Them: AgentBuild for Rietveld Refinement

arXiv:2606.12834v1 Announce Type: new Abstract: As scientific workflows shift from deterministic executables to LLM-based agents, the development practices on offer, such as fine-tuning, reinforcement learning, and prompt-and-go, bury the scientist's judgment. We propose treating agent construction as a workflow stage and introduce AgentBuild, which builds a scientific agent from a contract the scientist authors. The contract is a version-controlled rubric, a difficulty-graded curriculum, and a curated external knowledge base. A rubric-driven judge gates a meta-optimizer coding agent that edits the agent within a declared boundary, so the build compiles the agent, not the scientist's judgment. We instantiate this for Rietveld refinement of X-ray diffraction data through GSAS-II behind MCP and A2A, where a blank-harness construction run progresses through a lithium lanthanum zirconium oxide (LLZO) signal-to-noise ladder, reaches the 4 hour scan as a frontier case, and exposes the workflow-scope limits that remain. The same rubric that rewards credible fits also scores trajectory scope, making the frontier a contract failure rather than a pattern-fitting failure. As base models evolve, re-running AgentBuild is a re-tune, not a rebuild, and the scientist's authored contract remains the durable asset.

21.
arXiv (quant-ph) 2026-06-16

Hardy and Cabello Arguments in Spatial and Temporal Frauchiger-Renner Scenarios

arXiv:2606.15467v1 Announce Type: new Abstract: We investigate Hardy- and Cabello-type logical structures within spatial and temporal extensions of the Frauchiger–Renner (FR) framework, embedding these constructions directly into the FR multi-observer architecture. In the spatial multi-observer scenario, both Hardy and Cabello contradictions arise, with the Cabello construction yielding the stronger violation,$\(\Delta_Cabello^{\max}=0.1078\)$, which exceeds the maximal Hardy probability $\(P_{H}^{\max}=\frac{5\sqrt{5}-11}{2}\approx 0.09017\)$. We then develop a sequential temporal FR protocol based on coherent multi-observer measurements performed on a single spin-$\tfrac12$ system. In this temporal setting, the Hardy contradiction disappears identically due to dynamical constraints imposed by sequential state updates, whereas a finite Cabello-type violation survives, \(\Delta_Cabello^{\max}\approx 0.0674\). Our results establish a fundamental structural distinction between spatial entanglement and temporal multi-observer correlations in FR-type logical scenarios, and demonstrate that certain observer-independent description failures persist even without spacelike separation.

22.
arXiv (CS.AI) 2026-06-19

Execution-bound advisory automation for agentic AI: a reproducible AIBOM-driven CSAF-VEX framework

arXiv:2606.19390v1 Announce Type: cross Abstract: A protocol driven framework is presented that binds SBOM and AIBOM artefacts to deterministic environment capture and structured runtime telemetry. Exploitability is computed from declared artefacts, observed activation conditions, and enforced execution policies. CSAF VEX advisories are generated from combined static and runtime evidence, cryptographically signed, and validated through deterministic replay. Evaluation uses approximately 10000 component entries across synthetic Agentic AI workloads 50 to 5000 components, incorporating OSV, GitHub Advisory, KEV, and EPSS datasets.

23.
arXiv (CS.CV) 2026-06-15

NEST3D: A High-Resolution Multimodal Dataset of Sociable Weaver Tree Nests

Sociable weaver nests function as complex ecological structures offering thermoregulatory microhabitats and sustaining diverse species; however, datasets used in prior studies lack fine-grained 3D structural detail. Producing usable and accurate 3D weaver nest data is challenging due to their irregular geometry and integration with complex host vegetation. We bridge this gap with an open-access, 1.4 TB multimodal drone dataset of 104 nest-bearing trees, comprising 27,945 RGB images, 111,780 multispectral images, approximately 781 million 3D points, and expert-annotated semantic segmentation labels. We benchmark semantic segmentation using KPConv, RandLA-Net, and Point Transformer V3, with PT-v3 achieving an mIoU of 86.35% on the test set. While the results demonstrate strong performance for transformer-based and point-wise methods, they also highlight architecture-dependent challenges, particularly for convolution-based approaches such as KPConv. By uniquely combining spectral, spatial, and structural information, the presented dataset advances 3D reconstruction, segmentation, and classification algorithms, enabling ecological applications from nest volume estimation to species conservation, and serves as a demanding benchmark that exposes architecture-dependent performance under extreme class imbalance.

24.
arXiv (CS.CV) 2026-06-18

UniTemp: Unlocking Video Generation in Any Temporal Order via Bidirectional Distillation

Autoregressive video diffusion models have emerged as a promising approach for long video generation, achieving strong performance in streaming settings. However, existing methods are restricted to forward temporal generation, whereas practical video creation often requires flexible generation order, e.g., conditioning on future context to extend backward, or on both past and future context for inbetween generation. We bridge this gap by training an autoregressive model that supports generation in arbitrary temporal directions. A key technical challenge arises from the Causal 3D VAE widely used in video diffusion models, which encodes latents strictly conditioned on past context. While suited for forward generation, this causal structure causes inter-block discontinuities when generation proceeds backward. To address this, we introduce blockwise anchor latents, a set of auxiliary latents that restore the missing past context at block boundaries during backward generation. Built on this design, we propose UniTemp, a bidirectional distillation framework that trains a single autoregressive student model for any-direction video generation. At inference time, UniTemp conditions on arbitrary past and/or future frames, improving controllability for both bidirectional and inbetween generation. Experiments show that UniTemp maintains competitive performance on short and long video generation compared to forward-only methods, while enabling diverse workflows such as bidirectional video extension, inbetween generation, looping video generation, scene transition, and visual story generation. Project website: https://lzhangbj.github.io/projects/unitemp/

25.
arXiv (CS.AI) 2026-06-11

TileFuse: A Fused Mixed-Precision Kernel Library for Efficient Quantized LLM Inference on AMD NPUs

arXiv:2606.11357v1 Announce Type: cross Abstract: With the growing demand for on-device LLM inference, edge SoCs increasingly integrate NPUs to improve performance and energy efficiency under tight power and thermal budgets. However, practical LLM deployment on current client NPUs remains difficult: widely used quantization formats such as AWQ do not map cleanly onto many existing NPU software stacks, which are often proprietary and expose limited low-level control. In this work, we present TileFuse, a close-to-metal mixed-precision kernel library for AMD XDNA2 NPUs that targets transformer linear layers in quantized LLM inference. TileFuse brings practical low-bit formats such as AWQ-style W4A16 and W8A16 directly onto XDNA2, rather than forcing the model to be reshaped around an NPU-specific quantization scheme. TileFuse co-designs weight layout, metadata placement, mixed-precision microkernels, and array-level dataflow. Specifically, it fuses unpacking, dequantization, and GEMM/GEMV execution into a single kernel flow, introduces an interleaved pre-tiling layout that supports GEMM dimensions up to 32K, and redesigns GEMV dataflow to utilize the full 4x8 AIE array. Across kernel-level evaluations, TileFuse improves performance by up to 121.6% for GEMM and 281% for GEMV over full-precision baselines, while delivering more than 2x performance and energy-efficiency gains over strong iGPU baselines on GEMM. In end-to-end LLM experiments on Ryzen AI laptops, TileFuse achieves up to 2.0x lower prefilling latency with more than 64.6% lower energy consumption. Together, these results show that XDNA2 is a practical target for AWQ-style edge LLM inference and that native NPU support for off-the-shelf quantization can make NPUs substantially more usable in real client deployments.