Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-16

Entanglement as a Witness of Quantum Coherence: A Bipartite Monty-Hall Protocol

arXiv:2604.25953v3 Announce Type: replace Abstract: We present a bipartite protocol inspired by the Monty Hall puzzle that operationally distinguishes quantum coherence from classical ignorance. A principal qutrit is entangled with an ancillary qutrit via a controlled unitary, preparing $|\Psi\rangle = \frac{1}{\sqrt{3}}(|A,0\rangle + |B,1\rangle + |C,2\rangle)$. A rank-1 projective discard then eliminates one basis state, leaving a coherent superposition of the two remaining states. Finally, the ancilla and qutrit are measured, yielding joint probabilities that encode the interplay between superposition and measurement back-action. We show that the conditional probability $P(B|anc=0)$ takes the value $1/4$ in both quantum mechanics and the classical ignorant-host model, making it unsuitable as a witness. The true quantum-classical separation emerges in conditional joint probabilities that correlate ancilla outcomes with specific discard operations. We define witnesses $\mathcal{W}_{i,j} = P(anc=i, qutrit=j \mid discard k)$ where $j$ differs from the ancilla-implied state. Quantum mechanics predicts $\mathcal{W} = 1/4$, while any classical epistemic model with perfect initial correlations yields $\mathcal{W} = 0$. We provide the explicit $9 \times 9$ unitary matrix, a complete analysis of all measurement outcomes, and a detailed proof of the violation. The witness is fully immune to white noise and robust against moderate dephasing. The protocol requires only a single pair of entangled qutrits and sequential measurements – no spatial separation, no multiple copies, and no complex sets of incompatible observables. This makes it suitable for advanced undergraduate laboratories and provides a pedagogically accessible test of the ontic-epistemic distinction in quantum foundations.

02.
medRxiv (Medicine) 2026-06-17

County Year Informatics Model for Annual and Cumulative Unique Lung Cancer Screening Eligibility in Maryland, 2026 to 2045

Purpose: Population-level lung cancer screening programs require denominators that reflect age, smoking history, geography, and changing eligibility over time. We estimated annual prevalent and 20-year cumulative unique low-dose computed tomography screening eligibility for Maryland residents under alternative screening criteria. Methods: We built a deterministic cohort-cell stock-flow simulation using Maryland county-equivalent jurisdiction projections by age, sex, and race/ethnicity, with ACS socioeconomic/nativity covariates and smoking-history priors for ever-smoked status, pack-years, and quit-years. Scenarios included USPSTF 2013 legacy, USPSTF 2021, ACS 2023/2024, a risk-model-expanded sensitivity, and ever-smoked-only capacity stress tests. Cumulative unique eligibility counted people once at first eligibility rather than summing annual prevalent person-years. Results: Under USPSTF 2021, an estimated 238,346 Maryland residents were eligible in 2026 and 245,326 in 2045. The 20-year cumulative unique denominator was 768,668, whereas naively summing annual prevalent counts produced 4,850,735 person-years, a 6.31-fold overcount. ACS 2023/2024 expanded annual eligibility to 314,616 in 2026 and cumulative unique eligibility to 902,796 by adding remote former smokers. Ever-smoked-only adult eligibility was 1,957,699 in 2026 and 3,383,683 cumulative unique over 20 years. Conclusion: A Maryland statewide screening initiative should plan from cumulative unique eligibility and county-equivalent jurisdiction-specific burden rather than annual prevalence alone. Explicit pack-year and quit-year modeling materially changes statewide and county allocation compared with current-smoking proxy models.

03.
arXiv (CS.CV) 2026-06-16

Null-Space Diffusion Distillation Unlocks Speed, Fidelity and Realism in Lensless Imaging

Lensless imaging reconstructs scenes from highly multiplexed measurements, resulting in a severely ill-posed inverse problem. In this work, we identify a fundamental trade-off between measurement consistency, perceptual quality, and inference speed across lensless reconstruction paradigms. Traditional methods favor consistency but produce perceptually degraded results, supervised approaches achieve high-quality reconstructions with fast inference but may violate physical constraints, and diffusion-prior methods achieve high perceptual quality and consistency–particularly when structured constraints such as range-null decomposition are used–but remain slow due to iterative sampling. Motivated by this observation, we propose Null-Space Diffusion Distillation (NSDD), a single-pass reconstruction model that distills structured diffusion-prior inference into an efficient feed-forward network. NSDD learns to produce high-quality reconstructions that preserve measurement consistency while avoiding costly iterative sampling. Experimental results demonstrate that NSDD achieves perceptual quality and consistency competitive with diffusion-prior methods, while providing significantly faster inference and offering a favorable balance across all three objectives. Furthermore, ablation experiments show that distilling the range–null decomposition improves reconstruction quality and robustness over unstructured full-reconstruction distillation, including on unseen real scenes. These results highlight the potential of structure-aware distillation for efficient lensless imaging. Code is available at github.com/JRCSAVSN/NullSpaceDiffusionDistillation.

04.
arXiv (quant-ph) 2026-06-16

Neural network inverse design of nanophotonic scintillators

arXiv:2606.16309v1 Announce Type: cross Abstract: Scintillators are materials converting high-energy radiation into optical light, essential in a range of technologies such as medical imaging systems and security scanners. Scintillator development and optimization have remained limited by the complexity of their underlying physics, involving stochastic cascades of electron-electron, electron-phonon, and electron-photon interactions. Such processes are typically modeled by non-differentiable Monte Carlo simulations, limiting the applicability of machine learning for scintillator development. Here we present a physics-informed neural network that learns the scintillation cascade process from the incident high-energy particle to photon emission, substantially accelerating scintillator design and optimization. Combining this neural network with photonic simulations enables end-to-end differentiable optimization of the scintillator geometry. This allows us to optimize for arbitrary figures of merit, such as specific target emission patterns.. We demonstrate the concept and characterize it relative to previous approaches by inverse design of nanophotonic scintillators for X-ray imaging.

05.
bioRxiv (Bioinfo) 2026-06-18

MorphoStat: A Statistics-Aware Pipeline for Morphological Profiling Analysis

作者:

High-content imaging produces thousands of morphological measurements per cell. Interpreting these measurements requires normalization to remove plate effects, statistical tests selected on the basis of data distribution, and control over false discoveries across many features tested at once. MorphoStat is an open-source Python pipeline that applies this sequence of steps automatically. Given a CSV file from CellProfiler or a compatible imaging platform, it removes low-quality wells, normalizes each plate against DMSO controls using a MAD-scaled z-score, routes each feature to a parametric or nonparametric test based on a distributional check, applies Benjamini Hochberg correction, and writes out results and publication-ready figures. On the BBBC021 benchmark (MCF-7 breast-cancer cells, 632 wells, 473 features), MorphoStat recovered 12 of 13 known mechanism-of-action classes in principal component space, confirming that the normalization and statistical routing work as intended. The tool is available at https://github.com/Almunthir334/morphostat (DOI: 10.5281/zenodo.20354069) under the MIT license.

06.
arXiv (CS.AI) 2026-06-18

As You Wish: Mission Planning with Formal Verification using LLMs in Precision Agriculture

arXiv:2606.18519v1 Announce Type: cross Abstract: Though robotic systems are now being commercialized and deployed in various industries, many of these systems are highly specialized and often require an advanced skill set to operate and ensure they perform as instructed. To mitigate this problem, we recently introduced a mission planner leveraging LLMs to synthesize mission plans in precision agriculture based on mission descriptions provided in natural language. While the system demonstrates impressive performance, it also suffers from the inherent ambiguities of natural language. In this paper, we extend our system to address this issue by introducing multiple feedback loops in the planning architecture that leverage linear temporal logic (LTL) to ensure the mission planning system meets the specifications formulated by the user while still using natural language. To mitigate potential bias, this is achieved by using two different commercial LLMs in charge of the specification and verification subtasks. Through extensive experiments, we highlight the strengths and limitations of integrating mission verification into a fully autonomous pipeline, particularly regarding an LLM's ability to generate valuable LTL formulas, and show how our proposed implementation addresses and solves these challenges.

07.
bioRxiv (Bioinfo) 2026-06-18

Population-associated molecular variation in histologically normal breast tissue is context-dependent and associated with distinct transcriptional states

Population-associated molecular variation in breast tissue may contribute to differences in tissue biology and disease susceptibility, yet the extent to which such variation is shaped by underlying tissue states remains unclear. Here, we performed RNA-seq and lipidomic profiling of histologically normal breast tissue samples from African American (AA) and Caucasian White (CW) individuals, followed by conceptual integration of the resulting transcriptomic and lipidomic patterns. Unsupervised analysis revealed two distinct baseline transcriptional states (G1 and G2) that defined the primary axis of molecular variation across the cohort and corresponded to epithelial-enriched (G1) and vascular-enriched (G2) tissue contexts as determined by cell-type deconvolution. Global comparisons between AA and CW samples showed minimal transcriptomic differences, with only a single gene reaching significance after multiple testing correction. However, when stratified by baseline tissue state, 191 genes were differentially expressed within G1, with coordinated upregulation of extracellular matrix organization and proliferative/cytoskeletal processes in AA samples. These patterns were consistently supported across multiple enrichment approaches. No comparable population-associated differences were observed within G2. Lipidomic analyses showed partial but non-significant trends consistent with transcriptomic structure, suggesting that lipid variation provides complementary but limited support for baseline molecular differences, likely reflecting constraints of bulk tissue composition. Together, these findings suggest that population-associated molecular differences in normal breast tissue are context-dependent and emerge within specific baseline transcriptional states, where distinct biological programs can coexist and be differentially modulated. These findings highlight the importance of tissue heterogeneity in shaping molecular variation and its potential relevance to disease-associated tissue states.

08.
arXiv (CS.CV) 2026-06-12

MPMWorlds: Material-Point-Method Simulations for Inferring and Extrapolating Physical Dynamics

To study the ability to infer physical dynamics from videos and extrapolate them forward in time, we assemble a dataset of 2D Material Point Method (MPM) physical simulations covering rich physical phenomena such as deformable objects, fluids, kinetic objects, and emitters. We study code generation and video diffusion approaches on this dataset, identifying their strengths and weaknesses by varying the amount of physically relevant side information. The code generation model, beyond giving a working demonstration of automatic synthesis of MPM simulations, reveals that such an approach struggles with inferring physical parameters from visual input, but relative to video diffusion, produces physically and temporally stable extrapolations forward in time, while the video diffusion model more strongly identifies geometric properties from visual input but produces physically implausible extrapolations.

09.
arXiv (CS.CL) 2026-06-17

Environment-Grounded Automated Prompt Optimization for LLM Game Agents

LLM agents in interactive environments are highly sensitive to their prompts, yet prompt engineering remains a manual, task-specific process. We introduce an automated prompt optimization framework for LLM agents that decomposes the observation-to-action pipeline into a goal-conditioned descriptor agent and an action selection agent, and iteratively refines each module's prompt through an LLM-driven evolutionary loop guided by environment returns. We propose a behavior analyzer to attribute episode outcomes to specific prompt components, and a mutator to propose targeted revisions to the prompt, before validating them through environment rollouts. We evaluate on all five BabyAI tasks in the BALROG benchmark, comparing our pipeline against BALROG's RobustCoTAgent under both plain and guided prompt initializations. Optimization improves performance consistently across tasks and conditions, without requiring updates to the model weights. On PutNext, a multi-step coordination task where the RobustCoTAgent achieves 0% success, our framework reaches up to 72.5% success rate using the same underlying LLM with optimized prompts. These results suggest that a multi-agent framework, combined with automatic prompt optimization, enhances LLMs without the need for fine-tuning or extensive human supervision.

10.
arXiv (CS.AI) 2026-06-11

CRUMB: Efficient Prior Fitted Network Inference via Distributionally Matched Context Batching

arXiv:2606.11473v1 Announce Type: cross Abstract: Prior-fitted networks (PFNs) are a promising class of tabular foundation models that perform in-context learning, whereby the entire labelled training set is supplied as context, and predictions for test queries are produced in a single forward pass. However, the quadratically scaling self-attention mechanism in many PFN architectures makes inference prohibitive for very large training datasets. We propose CRUMB (Clustered Retrieval Using Minimised-MMD Batching), a three-stage inference wrapper that (i) clusters the test queries, (ii) selects a small, distributionally matched training subset for each cluster by greedily minimising the maximum mean discrepancy (MMD), and (iii) runs exact PFN inference on each reduced-context batch. CRUMB is architecture-agnostic and requires no retraining. On the 51-dataset TabArena benchmark, evaluated across three PFN architectures (TabPFNv2, TabICLv1, TabICLv2), we show that CRUMB outperforms similar state-of-the-art context selection strategies. We also show that CRUMB is resilient to covariate drift, as the MMD-minimisation step naturally helps align the training context distribution to match the current test batch distributions.

11.
arXiv (CS.AI) 2026-06-16

CLoVE: Personalized Federated Learning through Clustering of Loss Vector Embeddings

arXiv:2506.22427v2 Announce Type: replace-cross Abstract: We propose CLoVE (Clustering of Loss Vector Embeddings), a novel algorithm for Clustered Federated Learning (CFL). In CFL, clients are naturally grouped into clusters based on their data distribution. However, identifying these clusters is challenging, as client assignments are unknown. CLoVE utilizes client embeddings derived from model losses on client data, and leverages the insight that clients in the same cluster share similar loss values, while those in different clusters exhibit distinct loss patterns. Based on these embeddings, CLoVE is able to iteratively identify and separate clients from different clusters and optimize cluster-specific models through federated aggregation. Key advantages of CLoVE over existing CFL algorithms are (1) its simplicity, (2) its applicability to both supervised and unsupervised settings, and (3) the fact that it eliminates the need for near-optimal model initialization, which makes it more robust and better suited for real-world applications. We establish theoretical convergence bounds, showing that CLoVE can recover clusters accurately with high probability in a single round and converges exponentially fast to optimal models in a linear setting. Our comprehensive experiments comparing with a variety of both CFL and generic Personalized Federated Learning (PFL) algorithms on different types of datasets and an extensive array of non-IID settings demonstrate that CLoVE achieves highly accurate cluster recovery in just a few rounds of training, along with state-of-the-art model accuracy, across a variety of both supervised and unsupervised PFL tasks.

12.
arXiv (CS.LG) 2026-06-15

Stability of a Generalized Debiased Lasso with Applications to Resampling-Based Variable Selection

作者:

arXiv:2405.03063v3 Announce Type: replace-cross Abstract: We propose a generalized debiased Lasso estimator based on a stability principle. When a single column of the design matrix is perturbed, the estimator admits a simple update formula that can be computed from the original solution. Under sub-Gaussian designs with well-conditioned covariance, this approximation is asymptotically accurate for all but a vanishing fraction of coordinates in the proportional growth regime. The proof relies on concentration and anti-concentration arguments to control error terms and sign changes. In contrast, establishing comparable distributional limits (e.g., Gaussianity) under similar assumptions remains open. As an application, we show that the approximation significantly reduces the computational cost of resampling-based variable selection procedures, including the conditional randomization test and a local knockoff filter.

13.
arXiv (CS.LG) 2026-06-12

A Privacy-Preserving Framework Using Remote Data Science for Inter-Institutional Student Retention Prediction

arXiv:2606.12845v1 Announce Type: cross Abstract: This study explores privacy-preserving machine learning (PPML) techniques using the PySyft platform to enable collaborative prediction of student retention between institutions. We developed a remote data science (RDS) framework with a semi-air-gapped architecture consisting of high-side and low-side servers, allowing researchers from three universities to build predictive models on sensitive student data without direct data access. Using historical data from a small private university (N=720), we evaluated three synthetic data generation approaches and validated the framework through inter-institutional collaboration. The results demonstrate consistent classification performance across institutions (Macro F1: 0.690–0.695) while maintaining strict Family Educational Rights and Privacy Act (FERPA) compliance. We also propose Data-Type-Aware Templates, a novel synthetic data method that prioritizes privacy over distributional fidelity. Our findings confirm that RDS-based PPML is technically feasible for educational settings and offers a practical alternative to federated learning for small-scale inter-institutional collaborations. The code is available at https://github.com/jtfields/NAIRR240195-Privacy-Preserving-Machine-Learning.

14.
arXiv (CS.AI) 2026-06-18

ProfiLLM: Utility-Aligned Agentic User Profiling for Industrial Ride-Hailing Dispatch

arXiv:2606.18803v1 Announce Type: new Abstract: Bringing Large Language Models (LLMs) into industrial ride-hailing dispatch as semantic feature extractors over platform-scale behavioral logs is a compelling but under-explored data systems problem. Production matching pipelines remain dominated by structured numerical features, yet decisive behavioral signals (e.g., a driver's habitual aversion to certain regions) are inherently contextual and naturally expressible as LLM-generated user profiles. However, scaling such profiling to a live, millisecond-latency dispatcher faces three intertwined constraints rarely addressed together: on a platform with millions of daily orders, logs exceed any LLM's context window by orders of magnitude; most users are long-tail, with too few interactions for per-user profiling; and surface-fluent profiles do not necessarily improve downstream prediction utility. We present ProfiLLM, an agentic LLM data pipeline that operationalizes utility-aligned user profiling for production matching systems through two modules. (1) Tool-Augmented Global Knowledge Mining equips an LLM agent with 27 analytical tools to mine platform-scale data, producing reusable global knowledge, adaptive user clustering rules, and region-level supply-demand priors. (2) Utility-Aligned Profile Exploration generates multiple candidate profiles per cluster, evaluates them via a lightweight downstream utility proxy, iteratively refines the best candidates and constructs preference pairs for DPO fine-tuning. Deployed on DiDi's production dispatcher, ProfiLLM achieves up to +6.14% relative AUC improvement in outcome prediction, up to +4.35% GMV gain in dispatching simulation, and consistent improvements in a 14-day online A/B test including +0.47% GMV, +0.33% Completion Rate, and -0.82% Cancel-Before-Accept rate.

16.
arXiv (CS.CV) 2026-06-16

Enabling Real-Time Point-of-Care Ultrasound Segmentation: A GPU-Free Deployment in Resource-Limited Settings

作者:

Ultrasound imaging is the most widely adopted medical modality globally due to its low cost and portability, yet artificial intelligence (AI) deployment remains constrained by reliance on GPU-accelerated models, creating a structural paradox where the cost of "intelligence" exceeds that of the imaging device itself. Here, we present the systematic adaptation and extensive evaluation of UltraSeg, an ultra-lightweight architecture originally developed for colonoscopic polyp segmentation, now engineered for point-of-care ultrasound (POCUS) across ten public datasets spanning six anatomical sites (breast, thyroid, kidney, carotid, fetal, and small-animal tumor). We systematically validate both variants in ultrasound domains: UltraSeg-130K (0.13M parameters) achieves 89.7 FPS on single-core CPUs and 34.8 FPS on a refurbished mobile device, while UltraSeg-500K (0.5M parameters) delivers 44.6 FPS on CPU and 16.1 FPS on mobile device. UltraSeg-500K matches or exceeds the Dice performance of the 31M-parameter UNet and approaches 105M-parameter TransUNet in average performance, with superior zero-shot cross-dataset generalization on external validation sets (UDIAT, DDTI). By enabling clinical-grade segmentation without GPU dependency, this work brings AI costs in line with ultrasound accessibility, making advanced diagnostics available in resource-limited settings.

17.
arXiv (CS.LG) 2026-06-16

Prediction of Runtime Parameters of Parallel Chemistry Applications via Active and Generative Learning

arXiv:2606.16226v1 Announce Type: new Abstract: In this work, we develop two main Machine Learning based approaches to predict the runtime parameters of highly scalable parallel chemistry computations.These approaches employ active and generative learning together with the empirically determined gradient boosted regression tree models chosen among a rich suite of machine learning models. When evaluated on Coupled-Cluster with Singles and Doubles computations, our models achieve a mean absolute error percentage (MAPE) as low as 0.023 and a coefficient of determination as high as 99.9%. Furthermore, when combined with active learning to mitigate the lack of large amounts of training data, our models score a MAPE about 0.2 with 20-25% of the original dataset.

18.
arXiv (CS.CV) 2026-06-18

The Reward Was in Your Data All Along: Correcting Flow Matching with Discriminator-Guided RL

Score- and flow-matching models often rely on preference-based reinforcement learning for two purposes: aligning with subjective preferences and, surprisingly, recovering properties such as visual realism and coherent object structure that matching-based training is intended to learn from the data itself. We argue that this reflects a structural mismatch. Matching losses measure $\ell_2$ regression error on the velocity or score field under training-time marginals, a proxy poorly aligned with the visual and semantic properties that determine sample quality at inference. Given a reward aligned with these properties, RL sidesteps the mismatch by evaluating the model on its own samples and following the reward landscape directly. The challenge is to obtain such a reward without relying on human preferences, which are expensive and conflate data realism with annotator inclinations. We propose Discriminator-Guided RL (DRL). DRL trains a discriminator to separate data from base-model samples in a pretrained representation space and uses its logit as the reward in KL-regularized RL. The pretrained space restricts the discriminator to perceptually meaningful directions, and the logit estimates the log-likelihood ratio between data and model, which is the optimal reward for targeting the data distribution. Across SiT, JiT, REPA, and RAE, DRL reduces guidance-free FID (e.g., $9.38 \to 2.62$ on SiT) and semantic-space FD (e.g., $88.2 \to 19.3$ on DINOv3 for SiT), with consistent gains across all backbones, and improves human-preference rewards without training on them. It also yields a better Pareto frontier between preference reward and image fidelity under subsequent preference-based post-training, increasing alignment while reducing low-level artifacts such as oversaturation and excessive brightness.

19.
arXiv (CS.CV) 2026-06-16

An Extensive Benchmark for Single-round and Multi-round Instruction-based Image Editing

In recent years, there have been notable advancements in the area of instruction-based image editing (IIE), which focuses on the automatic alteration of input images using a model. Nevertheless, assessing the effectiveness of these editing models poses a considerable challenge due to the intricate nature of instructions and the wide variety of edits. To tackle this problem, one urgent task in this domain is the development of a robust evaluation framework that can precisely gauge the quality of editing outcomes and offer valuable benchmarks to guide future improvements. To address this challenge, we present a comprehensive evaluation benchmark named I2EBench2.0, designed for single-round and multi-round assessment of IIE models. I2EBench2.0 has four key features: 1) Evaluation Across Single and Multi-rounds: I2EBench2.0 simultaneously evaluates both single-round and multi-round instruction-based edits, assessing the precision and consistency of the edits. 2) Extensive Evaluation Criteria: I2EBench2.0 encompasses a broad range of criteria, evaluating both high-level and low-level aspects of each IIE model. Specifically, it incorporates 16 dimensions for single-round evaluations and 7 for multi-round evaluations. 3) Alignment with Human Judgment: To ensure our benchmark aligns with human evaluation, we conducted a comprehensive user study for each criterion. 4) Research-driven Insights: By analyzing the strengths and weaknesses of current IIE models across all 16 single-round and 7 multi-round dimensions, we provide critical insights aimed at directing future research in this area. We tested eight recently developed IIE models using I2EBench2.0 and derived academic insights through meticulous comparison and analysis. The related code, dataset, and images generated by all IIE models are available on GitHub: https://github.com/cocoshe/I2EBench.

20.
arXiv (CS.AI) 2026-06-11

Model-Based and Data-Driven Hierarchical Control and Topology Co-Design for Robust Networked Systems

arXiv:2606.11596v1 Announce Type: cross Abstract: In this paper, we consider a class of networked systems comprising an interconnected set of linear subsystems, disturbance inputs, and performance outputs. Using dissipativity theory, we first propose a model-based hierarchical control design strategy to ensure the closed-loop networked system is dissipative from its disturbance inputs to performance outputs. This involves designing local controllers for each subsystem to enforce local dissipativity guarantees, which are then exploited to co-design distributed global controllers and the interconnection topology to enforce global dissipativity guarantees while optimizing interconnection topology costs. The overall design process requires only solving a sequence of linear matrix inequality (LMI) problems, thereby retaining compositionality and decentralizability while avoiding non-convex, iterative design processes that are inefficient and centralized. This model-based hierarchical control design strategy assumes the knowledge of the subsystem dynamics, which may not hold in many real-world networked systems. Motivated by this, we also propose a data-driven hierarchical control design strategy that assumes only the availability of rich input-state-output trajectory data from the subsystems. The proposed data-driven design process assumes that the unknown disturbances affecting the subsystem dynamics are bounded by a quadratic matrix inequality (relaxing conventional bounds) and accounts for this by using the matrix S-lemma. Finally, the effectiveness of the proposed model-based and data-driven hierarchical control designs is illustrated for a networked system representing a DC microgrid, with the aim of enforcing robust (dissipative) voltage regulation and current sharing.

21.
arXiv (CS.CV) 2026-06-18

Simple Domain Generalization Methods are Strong Baselines for Open Domain Generalization

In real-world applications, a machine learning model is required to handle an open-set recognition (OSR), where unknown classes appear during the inference, in addition to a domain shift, where the data distribution differs between the training and inference phases. Domain generalization (DG) aims to handle the domain shift situation where the target domain of the inference phase is inaccessible during the model training. Open domain generalization (ODG) considers DG and OSR. Domain-augmented meta-learning (DAML) is a method targeting ODG; however, it has a complicated learning process. By contrast, although various DG methods have been proposed, they have not been evaluated in ODG situations. In this study, we comprehensively evaluate the existing DG methods in ODG and show that the two simple DG methods, CORrelation ALignment (CORAL) and maximum mean discrepancy (MMD), are competitive with DAML in several cases. In addition, we propose simple extensions of CORAL and MMD by introducing the techniques used in DAML, such as ensemble learning and Dirichlet mixup data augmentation. The experimental evaluation demonstrates that the extended CORAL and MMD can perform comparably to DAML with lower computational costs. This suggests that the simple DG methods and their simple extensions are strong baselines for ODG.

22.
arXiv (CS.AI) 2026-06-16

Decision-Weighted Flow Matching for Contextual Stochastic Optimization

arXiv:2606.16790v1 Announce Type: cross Abstract: Conditional generative models are increasingly used as scenario generators for stochastic optimization, but standard training objectives emphasize uniform distributional fit rather than the downstream decisions induced by generated scenarios. This creates an objective mismatch: errors in statistically common regions may have little effect on decision regret, whereas errors in decision-sensitive regions can substantially change the optimal action. We propose Decision-Weighted Flow Matching (DW-FM), a regret-aligned training framework that preserves the simplicity of standard flow matching while reweighting its velocity-regression objective using decision-sensitive endpoint information. Theoretically, we connect downstream regret to pathwise velocity mismatch through a loss-induced decision discrepancy and an adjoint transport argument, yielding an ideal regret-aligned surrogate and practical endpoint-weighted objectives with regret guarantees. Empirically, we demonstrate the effectiveness of DW-FM on three CVaR-based contextual stochastic optimization benchmarks spanning synthetic portfolio, semi-real financial, and traffic-CVaR tasks, where DW-FM improves downstream regret over standard baselines.

23.
arXiv (quant-ph) 2026-06-11

Numerically Optimizing Shortcuts to Adiabaticity: A Hybrid Control Strategy

arXiv:2604.01301v2 Announce Type: replace Abstract: Achieving fast, excitation-free quantum control is a vital challenge in modern quantum technologies. In many cases, shortcuts to adiabaticity enable fast adiabatic-like protocols, yet determining control parameters that satisfy practical constraints is often challenging in complex systems. Here, we combine an analytical shortcut to adiabaticity approach with several numerical optimization methods to boost the performance of the protocol. As a proof-of-principle for this hybrid approach, we study a particularly intricate control problem, the separation of two trapped ions. We show that this analytical-numerical approach, along with the physical insight gained through the variety of suboptimal solutions, leads to the exploration of new solutions in a complex landscape that yield improvements of up to 3 orders of magnitude. Moreover, this improvement comes with no additional cost from an experimental point of view.

24.
arXiv (quant-ph) 2026-06-11

Implementing Hamiltonian Renormalization Group Flow on Quantum Computers with VAPOR

arXiv:2606.11306v1 Announce Type: cross Abstract: While Hamiltonian Lattice Gauge Theory is gaining traction, today's limited numerical capacity leaves simulations affected by discretization errors. This motivates the implementation of renormalization group (RG) techniques to find discretization-error-free operators. To this end, we introduce VAPOR, a variational quantum algorithm that decomposes operators into Pauli strings, identifies RG flow orbits, and determines fixed points of a naively discretized operator. We illustrate this using a toy model of a kinematic operator in a symmetry-restricted SU(2) Yang-Mills theory.

25.
arXiv (CS.LG) 2026-06-11

Adjoint Method versus Physics-Informed Neural Networks in PDE-Constrained Inverse Problems

arXiv:2606.12337v1 Announce Type: cross Abstract: Inverse problems governed by partial differential equations (PDEs) are central to computational mechanics and are commonly solved by adjoint-based optimization, while physics-informed neural networks (PINNs) have emerged as a flexible alternative. Their relative performance remains difficult to assess because the two approaches are often compared under different formulations, parameterizations, optimizers, and regularization choices. We present a fair comparison of adjoint optimization and PINNs for PDE-constrained inverse problems. From a common abstract formulation, we instantiate both methods on identical domains, governing equations, observation models, and regularization terms, while matching the optimizer, unknown parameterization, and arithmetic precision wherever applicable. The benchmarks include unsteady Burgers, noisy Darcy permeability inversion, three-dimensional Allen–Cahn reaction identification, and unsteady Navier–Stokes viscosity identification. The results show that the representation of the unknown largely determines the preferred method: grid-based fields favor the discrete adjoint, whereas neural representations are native to PINNs and relevant for closure and constitutive modeling. For time-dependent problems, adjoint inversion can be dominated by trajectory storage and differentiation, while PINNs provide satisfactory reconstructions at lower cost. A PINN-warm-started adjoint strategy then recovers adjoint-level accuracy at substantially reduced cost.