Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-16

Adverse Childhood Experiences and Growth Outcomes in Childhood: A Longitudinal EHR-Based Study

Question Are adverse childhood experiences (ACEs) associated with altered growth trajectories in childhood? Findings In this cohort study of 412,549 children and adolescents, ACEs were associated with lower height throughout childhood, earlier pubertal timing, and shorter final stature. Height differences emerged approximately 2 years before ACE documentation and were greatest among those with earlier documentation. Meaning These findings suggest that early adversity affects physical growth in children and may serve as a measurable indicator of the biological consequences of early-life stress, especially in those with documentation of ACEs prior to the onset of typical pubertal growth. Importance Adverse childhood experiences (ACEs) are among the strongest risk factors for long-term mental and physical health complications, yet their impact on physical growth in childhood remains incompletely understood. Objective To determine the association of ACEs on childhood growth trajectories and growth dynamics. Design, Setting and Participants Retrospective cohort study using longitudinal electronic health record data. Data was collected from participants between February 1999 and August 2025. A large academic medical center biobank linked to deidentified electronic health records in the southeastern United States. A total of 412,549 individuals with at least 2 recorded height measurements between the ages of 2 and 20 were included in the primary analysis. Growth curve analyses were performed in a subset of 199,844 individuals with at least 3 height measurements spanning at least 2 years. Genetic analyses were performed in a subset of 10,114 individuals of primarily European ancestry. Exposure(s) Documented exposure to adverse childhood experiences before age 18 years identified through a natural language processing algorithm. Main Outcome(s) and Measure(s) Height-for-age z-scores across childhood, final attained height, and growth curve parameters estimated using SuperImposition by Translation and Rotation (SITAR) modeling. Results Among 412,549 participants, 18,502 (4.5%) had clinically documented ACEs during childhood. ACE documentation was associated with lower height-for-age z-scores throughout childhood and adolescence. Final attained height was significantly lower among ACE-documented individuals, with mean differences of -3.0 cm among males (174.0 cm vs 177.0 cm, p < 0.001) and -1.3 cm among females (161.8 cm vs 163.1 cm, p < 0.001). Height differences emerged approximately 2 years before clinical ACE documentation. Earlier age at first ACE documentation was associated with progressively shorter final attained height, with each year decrease in age at ACE documentation associated with a decrease in final height of -0.20 cm in females and -0.35 cm in males. Those with first ACE documented prior to pubertal age also showed the most pronounced growth dynamic differences, with males demonstrating a mean reduction in size of 5.25 cm (95% CI, -6.79 cm to -3.70 cm) and 1.26-year earlier pubertal timing (95% CI, -1.50 to -1.03 years), and females demonstrating a reduction in growth curve size of 3.62 cm (95% CI, -4.83 to -2.41 cm) and 1.14-year earlier pubertal timing (95% CI, -1.29 to -0.99 years). Conclusions and Relevance In this large clinical cohort, clinically documented ACEs were associated with time-dependent reductions in stature, earlier pubertal timing, and short final attained height. These findings suggest that early childhood adversity may have lasting effects on physical development and highlight growth trajectories as a potential marker of the biological consequences of early-life stress.

02.
arXiv (CS.AI) 2026-06-11

TouchThinker: Scaling Tactile Commonsense Reasoning to the Open World with Large-scale Data and Action-aware Representation

arXiv:2606.11637v1 Announce Type: new Abstract: Touch is a key modality for embodied agents to understand the physical world. Although recent work has incorporated tactile signals into language systems for tactile commonsense reasoning, scaling such systems to realistic open-world settings remains challenging due to two key bottlenecks: (1) current tactile reasoning datasets remain limited in format and scale, providing insufficient supervision for reasoning from tactile observations to physical commonsense and hindering the learning of transferable tactile commonsense; (2) Tactile signals are inherently redundant and action-specific, yet existing methods often overlook these properties, resulting in inefficient representations with limited semantic expressiveness. To address these limitations, we propose TouchThinker, a tactile-language framework that scales tactile commonsense reasoning to the open world from both data and representation perspectives. First, we construct TouchThinker-1M, a million-scale, multi-source tactile reasoning dataset covering 415 objects, 8 scenarios, and 7 sensor types, providing a solid data foundation for open-world generalization. We further introduce TouchThinker-Bench, an open-world benchmark with more realistic and diverse tasks. Then, we propose action-aware modeling mechanism to improve tactile representation efficiency and enable efficient reasoning. Experimental results demonstrate that TouchThinker achieves competitive performance against state-of-the-art models across multiple datasets. Our code and dataset will be made available at: https://github.com/lvkailin0118/TouchThinker.

03.
PLOS Medicine 2026-06-18

Association between initial benzodiazepine prescribing patterns and time to benzodiazepine discontinuation: A population-based retrospective cohort study

by Nikki Bozinoff, Tanya S. Hauck, Robert A. Kleinman, Matthew E. Sloan, Beth A. Sproule, Simone N. Vigod, Jennifer Wyman, Priscila Pequeno, Tara Gomes Background Long-term benzodiazepine use has been associated with increased risk of morbidity and mortality. Preventing long-term use through safer prescribing practices has received little attention to date. We sought to better understand associations between initial prescription characteristics and duration of benzodiazepine use. Methods and findings This was a retrospective population-based cohort study of 1,820,808 adults in Ontario with incident benzodiazepine prescriptions between January 1, 2013 and December 31, 2020, with follow-up to December 31, 2021. The primary exposure was duration of the index prescription (≤7 days—referent group, 8–14 days, 15–30 days, or >30 days). Secondary exposures were: (a) duration of action of index benzodiazepine(s) prescription (short-acting, long-acting or both); (b) number of benzodiazepine dispensed on index (1 or 2+); and (c) mean daily dose of the index prescription in Diazepam Milligram Equivalents (DMEs). The primary outcome was time to benzodiazepine discontinuation in days. Multivariable models were adjusted for age, sex, anxiety, insomnia, and substance use disorders as well as other important comorbidities and socio-demographic characteristics. The median age at index was 53 years (Interquartile Range (IQR) 38–67), and 62.6% were women. The median time to discontinuation in women was 16 days (IQR: 6–29) while the median time to discontinuation in men was 19 days (IQR: 6–29). Lorazepam was the most commonly prescribed benzodiazepine on index (63.9%), followed by clonazepam (17.3%) and diazepam (5.8%). In multivariable Cox Proportional Hazards Models, longer index prescriptions were associated with a lower likelihood of benzodiazepine discontinuation (adjusted Hazard Ratio (aHR) 0.54 (95% Confidence Interval (CI) [0.54,0.54]) for 8–14 days; aHR 0.26 (95% CI [0.25,0.26] for 15–30 days and aHR 0.14 (95% CI [0.14,0.14]) for >30 days, compared to ≤7 days, respectively). Being prescribed two or more benzodiazepines versus 1 was also associated with a reduced likelihood of discontinuation (aHR 0.59 (95% CI [0.57,0.61])), as was being prescribed long-acting benzodiazepines (aHR 0.80 (95% CI [0.80,0.80])) or a combination of short and long acting benzodiazepine (aHR 0.84 (95% CI [0.80,0.88])) versus short-acting benzodiazepines alone. Mean daily doses of >5 to ≤10 DME and >10 to ≤20 DME were associated with an increased likelihood of discontinuation (aHR 1.03 (95% CI [1.03,1.03]); aHR: 1.03 (95% CI [1.03,1.04])), whereas doses >20 DME were associated with a reduced likelihood of discontinuation (aHR 0.98 (95% CI [0.97,0.98])) compared with ≤5 DME. Findings may be subject to bias from unmeasured confounding. Conclusion This large population-based cohort study found that prescribing shorter courses of benzodiazepines, use of a single benzodiazepine, use of a short-acting agent, were associated with reduced likelihood of long-term benzodiazepine use. Findings suggest that simple changes to prescribing practices could reduce prolonged benzodiazepine use and the morbidity and mortality associated with long-term use of these medications.

04.
arXiv (math.PR) 2026-06-11

On the Wasserstein distance between a hyperuniform point process and its mean

arXiv:2404.09549v3 Announce Type: replace Abstract: We study the existence of bounds on the expected $p$-Wasserstein distance between a random measure and its mean under the assumption that the $p$-th centered moments of the counting statistics are controlled uniformly in space. The average Wasserstein transport cost is shown to be bounded from above and from below by some multiples of the number of points. $D$-dimensional versions of those results are also obtained. As a corollary, we prove that for any value of $p\geq 1$ the Ginibre point process can be seen as a perturbed lattice with identically distributed perturbations with a finite $p$-th moment.

05.
arXiv (quant-ph) 2026-06-16

Linear algebra at exponential scale via tensor network dimension reduction

arXiv:2606.15350v1 Announce Type: cross Abstract: Many problems in modern scientific computing are challenging because of a curse of dimension, where their mathematical formulation involves objects whose dimension is exponential in the nominal "size" of the problem. Tensor networks can provide a compact representation for exponentially large vectors and matrices that arise in applications, but these representations do not always lead to reliable algorithms. This paper develops and analyzes techniques for randomized dimension reduction of tensor network data. These techniques support a suite of efficient algorithms for provably solving exponential-scale linear algebra problems, including trace estimation and eigenvalue approximation. The paper includes several stylized illustrations from quantum many-body physics with ambient dimension up to $2^{200}$.

06.
arXiv (CS.CV) 2026-06-15

A Qualitative Review of GenAI-Based Methods for Data Generation and Augmentation in Industrial Computer Vision Applications

AI-driven computer vision applications require a profound database to ensure predictable behaviors and performance. Such predictable behaviors are especially important for industrial applications in gaining trust from users. However, such a database is not readily available in industrial applications, and its acquisition is not trivial either. Active learning methods can be applied to ramp up data within a project deployment to iteratively increase the database, and thus the application predictability. Unfortunately, we observe that this often leads to a loss of user trust in the application, which is difficult to regain once lost. This leads to a "chicken-and-egg" dilemma in which neither the database nor the application is developed. In this work, we review state-of-the-art methods and approaches to further boost the database the initial active data ramp-up phase. Here, we focus on recent advancements in GenAI-based data generation and augmentation methods and review their adaptability on an industrial computer vision classification use case. Although we observe a potential for automatic data ramp-up, we also see a domain miss match in between the source (training environment) and target (industrial use-case) - regarding context defined in natural language and object characteristics.

07.
arXiv (CS.CL) 2026-06-19

ShoppingBench: A Real-World Intent-Grounded Shopping Benchmark for LLM-based Agents

Existing benchmarks in e-commerce primarily focus on basic user intents, such as finding or purchasing products. However, real-world users often pursue more complex goals, such as applying vouchers, managing budgets, and finding multi-products seller. To bridge this gap, we propose ShoppingBench, a novel end-to-end shopping benchmark designed to encompass increasingly challenging levels of grounded intent. Specifically, we propose a scalable framework to simulate user instructions based on various intents derived from sampled real-world products. To facilitate consistent and reliable evaluations, we provide a large-scale shopping sandbox that serves as an interactive simulated environment, incorporating over 2.5 million real-world products. Experimental results demonstrate that even state-of-the-art language agents (such as GPT-4.1) achieve absolute success rates under 50% on our benchmark tasks, highlighting the significant challenges posed by our ShoppingBench. In addition, we propose a trajectory distillation strategy and leverage supervised fine-tuning, along with reinforcement learning on synthetic trajectories, to distill the capabilities of a large language agent into a smaller one. As a result, our trained agent achieves competitive performance compared to GPT-4.1.

08.
arXiv (quant-ph) 2026-06-17

Quantum algorithm for dephasing of coupled systems: decoupling and IQP duality

arXiv:2601.06298v2 Announce Type: replace Abstract: Noise and decoherence are ubiquitous in the dynamics of quantum systems coupled to an external environment. In the regime where environmental correlations decay rapidly, the evolution of a subsytem is well described by a Lindblad quantum master equation. In this work, we introduce a quantum algorithm for simulating unital Lindbladian dynamics by sampling unitary quantum channels without extra ancillas. Using ancillary qubits we show that this algorithm allows approximating general Lindbladians as well. For interacting dephasing Lindbladians coupling two subsystems, we develop a decoupling scheme that reduces the circuit complexity of the simulation. This is achieved by sampling from a time-correlated probability distribution - determined by the evolution of one subsystem, which specifies the stochastic circuit implemented on the complementary subsystem. We demonstrate our approach by studying a model of bosons coupled to fermions via dephasing, which naturally arises from anharmonic effects in an electron-phonon system coupled to a bath. Our method enables tracing out the bosonic degrees of freedom, reducing part of the dynamics to sampling an IQP circuit. The sampled bitstrings then define a corresponding fermionic problem, which in the non-interacting case can be solved efficiently classically. We comment on the computational complexity of this class of dissipative problems, using the known fact that sampling from IQP circuits is believed to be difficult classically.

09.
arXiv (CS.CV) 2026-06-12

HYDRA-X: Native Unified Multimodal Models with Holistic Visual Tokenizers

Holistic visual tokenizers are fundamental to unified multimodal models (UMMs) as they map diverse visual inputs into a unified representation space. In this paper, we present HYDRA-X, the first UMM that unifies image and video tokenization within a single Vision Transformer (ViT). Our design is driven by two core challenges: efficiently injecting spatiotemporal reconstruction capability into a native ViT, and embedding image- and video-level semantic awareness into the latent space. To address the first, comprehensive ablations reveal two key findings: (1) frame-level causal temporal attention suffices for visual reconstruction, whereas full spatiotemporal attention degrades it; and (2) hierarchical temporal compression substantially outperforms single-step alternatives. To tackle the second, we propose a lightweight decompressor that upsamples temporally compressed features under joint image-video teacher supervision, thereby enforcing complementary semantic structures within the compact latent space. Building on this holistic tokenizer, we further propose a principled improvement of the editing pipeline: source-target interaction should occur at the latent level inside the tokenizer rather than at the semantic level inside the LLM, substantially improving editing consistency and accelerating convergence. Instantiated at the 7B dense model, HYDRA-X achieves strong performance across image and video understanding and generation tasks, paving the way for future unified-tokenizer UMMs.

10.
arXiv (CS.LG) 2026-06-11

Bootstrapped Monitoring: Leveraging Transparent Reasoning to Oversee Stronger AI Agents

arXiv:2606.11998v1 Announce Type: new Abstract: Trusted monitoring is a cornerstone of AI control. However, as frontier models grow more capable, the increasing capabilities gap between trusted and untrusted models may render trusted models unreliable monitors. We introduce bootstrapped monitoring, a protocol that addresses this by inserting a stronger, intermediate untrusted model with transparent chain-of-thought reasoning into the oversight chain. The untrusted monitor ($U_m$) evaluates the agent's actions, while a weaker trusted model ($T$) oversees $U_m$'s reasoning to detect collusion. We evaluate bootstrapped monitoring on multi-turn software engineering tasks (BashArena) across multiple agents and monitors. Bootstrapped monitoring substantially improves catch rates over trusted-only monitoring, even when the untrusted monitor actively colludes with the agent, provided we have access to its raw chain-of-thought. Our results suggest that bootstrapped monitoring can extend the useful lifetime of trusted models in control as AI capabilities advance.

11.
arXiv (CS.CV) 2026-06-17

StereoFactory: A Unified Merging Framework for Robust Stereo Matching

Stereo matching has advanced through foundation models trained on large-scale datasets, yet this paradigm suffers from a scalability bottleneck: incorporating new data requires costly joint retraining. Model merging offers a scalable post-hoc alternative by integrating knowledge from specialized models after source checkpoints are available. However, existing merging methods typically retain all available models or rely on greedy inclusion, which can preserve harmful task-vector interference. We propose StereoFactory, a coarse-to-fine evolutionary framework for adaptive model merging. Stage~1 employs a genetic algorithm to search the combinatorial space of model subsets, determining which models should participate. Stage~2 addresses module-level knowledge specialization (different functional modules exhibit distinct preferences for knowledge sources) through CMA-ES optimization of architecture-adaptive routing over the selected task vectors, with optional module-level scaling. Experiments across two architectures and four benchmarks demonstrate that StereoFactory consistently achieves the best four-benchmark average under the same checkpoint pool, reducing the average error from 3.80 to 3.30 on NMRF and from 2.88 to 2.19 on FoundationStereo relative to the strongest controlled baseline. The post-hoc search requires only 2.7–3.7\% of the corresponding joint-retraining wall-clock time. Analysis reveals that knowledge contributions are inherently module-specific, and selected subsets can transfer across architectures with minimal degradation. Code will be publicly released upon acceptance at: https://github.com/XiandaGuo/StereoFactory.

12.
arXiv (CS.CL) 2026-06-19

Self-Preference Is Weak or Absent in Verifiable Instruction-Following Revision: A Four-Model Test Under Genuine Authorship

Large language models (LLMs) increasingly review and revise text, including their own. A documented self-preference bias (models favoring their own generations when acting as judges) raises the question of whether models also resist valid corrections to their own writing. We test this in a setting where "valid" is decided not by another model but by a deterministic verifier: instruction-following revision on IFEval. A model writes a draft; the official IFEval checker confirms the draft violates a constraint and that a candidate edit fixes it; the model then accepts or rejects that edit either as the genuine in-context author or as a fresh model that sees the draft neutrally. Across four mid-tier model families and 85 author-versus-fresh comparisons, we find no detectable self-preference: authors reject verified-good fixes to their own drafts at essentially the same rate as fresh models judging the same drafts (gap -5.1 pp, 95% CI [-12.9, +2.7]). A self-skepticism hint from a smaller pilot did not replicate at scale. The one robust observation is qualitative: when authors do reject a verified-good fix, 97% of their stated reasons are flaw-catching rather than preference, that is, about the character of rejections, not an elevated rate. Effects smaller than ~13 pp cannot be excluded at this sample size.

13.
arXiv (CS.CV) 2026-06-19

Through the PRISM: Preference Representation in Intermediate States of Video Diffusion Models

Evaluating video generation with clean, pixel-based reward models disconnects evaluation from the noisy diffusion process and incurs massive VAE decoding costs. In this paper, we challenge this paradigm by asking a fundamental question: Can a powerful video generator inherently discriminate preferences directly from noisy latents? To answer this, we introduce PRISM (Preference Representation in Intermediate States of Diffusion Models). PRISM employs a lightweight Query-based Aggregation head with a frozen video diffusion backbone to decode preference signals from noisy latents. Surprisingly, PRISM not only achieves SOTA preference accuracy but also unlocks strong noise-robustness, which enables early-stage Best-of-$N$ sampling. This allows for filtering suboptimal candidates at the very beginning of denoising, drastically reducing computation while boosting video quality. We also reveal a strong positive correlation between a backbone's generative performance and its inherent evaluative power, enabling self-improving video backbones.

14.
arXiv (math.PR) 2026-06-11

Construction of ergodic IDLA forests in $\mathbb{Z}^d$

arXiv:2506.10476v2 Announce Type: replace Abstract: We prove the existence of infinite-volume IDLA forests in $\mathbb{Z}^d$ , with $d \geq 2$, based on a multi-source IDLA protocol. Unlike IDLA aggregates, the laws of the IDLA forests studied here depend on the trajectories of particles, and then do not satisfy the famous Abelian property. Their existence is due to a stabilization result (Theorem 1.1, our main result) that we establish using percolation tools. Although the sources are infinitely many, we also prove that each of them play the same role in the building procedure, which results in an ergodicity property for the IDLA forests (Theorem 1.2).

15.
arXiv (CS.AI) 2026-06-16

Sensory Restoration via Brain-Computer Interfaces: A Unified 2 x 2 Framework and Convergence Roadmap

arXiv:2606.15091v1 Announce Type: cross Abstract: Millions of individuals worldwide suffer from sensory and communication deficits caused by neurodegenerative diseases, stroke, or trauma. Brain-computer interfaces (BCIs) offer a promising avenue for sensory and motor restoration. However, the scientific literature remains highly fragmented between invasive neuroprosthetics and non-invasive electrophysiological decoders, with a lack of consistent terminology and comparison metrics. This chapter proposes a unified 2 x 2 framework categorizing BCIs along two axes: degree of invasiveness (invasive vs. non-invasive) and signal direction (afferent sensory-IN vs. efferent sensory-OUT). We define and distinguish the paradigms of restoration, substitution, and augmentation. Furthermore, we outline a structural roadmap for the convergence of these modalities over near-, medium-, and long-term horizons, focusing on physical limits and the integrative role of machine learning foundation models.

16.
medRxiv (Medicine) 2026-06-17

Investigating shared genetic overlap of immune-mediated inflammatory diseases and cardiometabolic diseases

Abstract Background: Immune-mediated inflammatory diseases (IMIDs) are associated with increased risk of cardiometabolic diseases. Investigating genetic overlap among these conditions can provide insights into their clinical management. Methods: Genetic correlation was assessed using linkage disequilibrium score regression (LDSC). Then, a meta-analysis was conducted using Association Analysis Based on SubSETs (ASSET) to pinpoint independent single nucleotide polymorphisms (SNPs) shared across the diseases. Each independent SNP was then used to define a genomic window (+/-500KB) for colocalisation analysis and Local Analysis of [co]Variant Association (LAVA) to offer multiple layers of regional pleiotropic evidence. Over-representation analysis was then run to identify enriched biological pathways, which then were used for drug target analysis. Results: The LDSC analysis showed a significant global genetic correlation for rheumatoid arthritis (RA) and cardiometabolic diseases including hypertension, coronary artery disease (CAD), heart failure (HF), stroke, atrial fibrillation (AF), and type two diabetes mellitus (T2DM) ranging from rg = 0.09 to 0.24. ASSET meta-analysis identified 164 independent SNPs shared across RA and the cardiometabolic diseases with P < 5 x 10- in the overall one-sided meta-analysis P-value, FDR < 0.05 in both individual GWASs, and TRUE phenotype matrix. Colocalisation analysis revealed multiple loci with strong evidence (Posterior probabilities [&ge;] 80) of single causal SNPs between the trait pairs. LAVA analysis was then used as an additional layer of confirmation for the findings generated by ASSET and colocalisation and thus several loci were highlighted. Over-representation analysis showed significant enriched immune-related pathways across RA-hypertension, RA-CAD, RA-AF, and RA-T2DM trait pairs. Drug target analysis highlighted several drugs which could be further tested for their effectiveness in RA and its common comorbidities. Conclusion: The findings revealed a shared genetic architecture and key immune-related biological pathways underlying RA and its associated cardiometabolic comorbidities. The identified genes and drugs provide opportunities for further therapeutic assessment which could improve clinical management strategies.

17.
arXiv (CS.AI) 2026-06-15

PRISM: Perception Reasoning Interleaved for Sequential Decision Making

arXiv:2605.05407v2 Announce Type: replace Abstract: Scaling LLM-based embodied agents from text-only environments to complex multimodal settings remains a major challenge. Recent work identifies a perception-reasoning-decision gap in standalone Vision-Language Models (VLMs), which often overlook task-critical information. In this paper, we introduce PRISM, a framework that tightly couples perception (VLM) and decision (LLM) through a dynamic question-answer (DQA) pipeline. Instead of passively accepting the VLM's description, the LLM critiques it, probes the VLM with goal-oriented questions, and synthesizes a compact image description. This closed-loop interaction yields a sharp, task-driven understanding of the scene. We evaluate PRISM on the ALFWorld and Room-to-Room (R2R) benchmarks. We show that: (1) PRISM significantly outperforms state-of-the-art image-based models, (2) our Interactive goal-oriented perception pipeline yields systematic and substantial gains, and (3) PRISM is fully automatic, eliminating the need for handcrafted questions or answers.

18.
bioRxiv (Bioinfo) 2026-06-14

TopoMIL: Topology Improves Multiple Instance Learning in Diagnostic Microscopic Images

Microscopic images of cells and tissues are central to disease diagnosis. In computational pathology, multiple instance learning (MIL) has emerged as a key paradigm for analyzing numerous images within a single patient sample. While the representative distribution of cells in a sample is important for diagnosis, existing MIL frameworks largely overlook it. We introduce TopoMIL, a framework that extracts the representative topological structure of the sample and integrates it into the MIL classifier. Three topological representations are assessed, each with distinct advantages and computational costs. We evaluate TopoMIL on four histopathology and cytomorphology datasets, each presenting unique challenges. Integrating the sample's topological information into MIL enhances classification across average, max, attention-based, and transformer pooling, yielding AUCROC gains of 3.3%, 4.2%, 5.9%, and 0.5%, respectively, with moderate computational cost. Our work underscores the potential of TopoMIL as a scalable extension to existing morphology-based models in computational pathology.

19.
arXiv (quant-ph) 2026-06-19

Complexity of detecting large coefficients in the Pauli basis

arXiv:2606.19545v1 Announce Type: new Abstract: We study the problem of deciding, given a mechanism to prepare a quantum state $\rho$ and a value $\varepsilon > 0$, whether there is some non-identity Pauli matrix $P$ such that $|Tr(P \rho)| \geq \varepsilon$. We consider that the state $\rho$ is described as the result of tracing out some of the qubits of a pure state prepared by a circuit $C$, and we assume the promise that either there is a Pauli matrix satisfying the stated condition or, instead, that for all non-identity Pauli matrices $P$ it is the case that $|Tr(P\rho)|\leq \varepsilon/2$. The problem is in $QCMA$, and we prove that if it belongs to $BQP$ then $NP \subseteq BQP$. The result is obtained through a reduction from the minimum-weight code problem, and it holds even when $\rho$ is assumed to be a pure state (i.e. when no qubits are discarded) and $\varepsilon$ is constant. This resolves an open question regarding the existence of efficient tomographic procedures to find the largest coefficients of a quantum state in the Pauli basis: namely, they do not exist under the standard hypothesis $NP \nsubseteq BQP$.

20.
arXiv (CS.AI) 2026-06-17

Surveying GenAI-based Automation in Printed Circuit Board Design and Test

arXiv:2606.17074v1 Announce Type: cross Abstract: Generative artificial intelligence (GenAI) is increasingly used for applications in the hardware and software domains. It purports to reduce the manual effort involved in the development and testing of complex systems before release. Within the hardware space, most tasks have focused on design automation of integrated circuits, particularly with hardware description languages. However, other types of hardware also exist! In this survey, we instead examine how GenAI has been and is being across the printed circuit board (PCB) design life cycle. This includes everything from supply chains, system specification, circuit design, layout and optimisation, validation and test, and PCB assembly and distribution. Through this lens we present a taxonomy of discovered works, categorising them according to their intent and contributions. This survey also identifies key technical challenges that GenAI faces in this space, such as domain-specific data scarcity and limited support for integration with existing PCB tools. Finally, future research directions are discussed: our survey shows that there are many opportunities remaining when considering how GenAI may be integrated into various tasks in PCB design and test.

21.
arXiv (CS.CV) 2026-06-19

CoMo: Learning Continuous Latent Motion from Internet Videos for Scalable Robot Learning

Unsupervised learning of latent motion from Internet videos is crucial for robot learning. Existing discrete methods generally mitigate the shortcut learning caused by extracting excessive static backgrounds through vector quantization with a small codebook size. However, they suffer from information loss and struggle to capture more complex and fine-grained dynamics. Moreover, there is an inherent gap between the distribution of discrete latent motion and continuous robot action, which hinders the joint learning of a unified policy. We propose CoMo, which aims to learn more precise continuous latent motion from internet-scale videos. CoMo employs an early temporal difference (Td) mechanism to increase the shortcut learning difficulty and explicitly enhance motion cues. Additionally, to ensure latent motion better captures meaningful foregrounds, we further propose a temporal contrastive learning (Tcl) scheme. Specifically, positive pairs are constructed with a small future frame temporal offset, while negative pairs are formed by directly reversing the temporal direction. The proposed Td and Tcl work synergistically and effectively ensure that the latent motion focuses better on the foreground and reinforces motion cues. Critically, CoMo exhibits strong zeroshot generalization, enabling it to generate effective pseudo action labels for unseen videos. Extensive simulated and real-world experiments show that policies co-trained with CoMo pseudo action labels achieve superior performance with both diffusion and auto-regressive architectures.

22.
Nature (Science) 2026-06-17

Optical metasurfaces for general vision processing on the edge

作者:

Large-scale artificial intelligence (AI) models achieve notable performance in computer vision but require substantial computational resources, limiting their deployment on edge devices1,2. Optical neural networks (ONNs) promise reduced latency and energy consumption by making use of the inherent parallelism of light3. However, present ONNs struggle to scale and are confined to simple tasks, owing to the challenges of replicating exact algebraic operations of digital models using physical (analogue) systems. This work introduces a new paradigm that directly embeds core computer vision principles, including similarity-based recognition, attention-guided perception and detail–context fusion, into a large-scale optical metasurface. By unifying optical physics with these computer vision fundamentals, we develop a photonic–electronic engine that overcomes scalability and generality barriers, enabling high-accuracy, general-purpose computer vision at the edge. The resulting system combines a 41-million-parameter optical metasurface front end with a co-designed, ultraefficient 87,000-parameter digital back end, outperforming many digital models with tens of millions of parameters across object detection, segmentation, 3D reconstruction and video understanding. We build a deployable prototype and demonstrate real-time edge visual processing in natural scenes. This work represents a path towards practical optical computing for general vision tasks in complex natural environments, enabling a new paradigm for low-energy, low-latency, real-time on-device vision intelligence. By embedding core computer vision principles into a large-scale optical metasurface, an efficient vision processing system using far fewer parameters is demonstrated to outperform many digital models and enables deployment on edge devices.

23.
arXiv (CS.CV) 2026-06-16

Differentiable Packing of Irregular 3D Objects with Adaptive Container Estimation

Most existing approaches either fix the container in advance or optimize only a single container dimension through an outer search loop, leaving the remaining dimensions as a manual tuning problem. We present a differentiable packing framework that jointly optimizes all 6N object pose parameters and all three container side lengths inside a single gradient-based loop. The formulation combines six physics-inspired, differentiable loss terms computed directly on triangle meshes through axis-aligned bounding-box proxies. An adaptive squeezing mechanism periodically tightens the container whenever the overlap loss falls below a pair-count-scaled threshold, producing a large initial drop in container volume, followed by small refinements. All pairwise computations are written in tensor-broadcasting form, giving a 3.4 to 54 times speedup over a reference loop-based implementation. The pipeline is implemented in Python and PyTorch, with no physics engine, FFT library, or convex decomposition. On multiple object categories, the method produces containers that are 11 to 32 percent smaller than time-matched DBLF and simulated-annealing baselines at N =100, while running in under 4 minutes per instance on a single consumer GPU.

24.
arXiv (quant-ph) 2026-06-15

Sensitivity of polaron-molecule observables to MDR/GUP-like ultraviolet deformations at low energies via quantum computing

arXiv:2606.14479v1 Announce Type: new Abstract: We show that impurity many-body observables can display enhanced sensitivity to ultraviolet deformations of generalized-uncertainty-principle and modified-dispersion-relation type at accessible energy scales. Using a deformed polaron-molecule Hamiltonian constructed to preserve the infrared sector, we quantify the impact of such deformations on spectral and Ramsey observables and implement the corresponding dynamics in a controlled quantum computing setting. We identify regimes near the polaron-molecule crossover where small ultraviolet deformations are strongly amplified, leading to experimentally resolvable changes in quasiparticle properties and spectral response. Our results establish a concrete sensitivity-based route to low-energy quantum-gravity phenomenology in a well-defined many-body platform and delimit the validity of the effective description. Furthermore, we report experimental validation on the QRed superconducting quantum processor (BSC-CNS).

25.
arXiv (quant-ph) 2026-06-16

Quantum optimal control of steady orbits

arXiv:2606.15383v1 Announce Type: new Abstract: Periodically driven dissipative systems can settle into steady orbits - fixed loops on their dynamical manifolds. In quantum mechanics, steady orbits occur in cooling engines (used to initialise quantum devices), coherent oscillators (such as lasers and masers), precision metrology devices (atomic clocks, optical and spin magnetometers), and magnetic resonance (steady state free precession, dynamic nuclear polarisation). Steady orbits and stroboscopic steady states are a promising target for quantum optimal control, but the numerical complexity is prohibitive: the infinite loop defeats gradient ascent pulse engineering (GRAPE) which relies on explicit numerical propagation in the time domain. Here we propose an efficient quantum control strategy for stroboscopic steady states and limit cycles that are approached asymptotically when a control sequence is repeated infinitely many times. The formalism is different from Floquet-Lindblad state engineering and effective Hamiltonian theories: it finds control sequences that drive a dissipative quantum system towards a steady orbit passing through user-specified waypoints. The software implementation (same numerical complexity scaling as GRAPE) is done for the Spinach library.