Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-16

Is Your Trajectory Displacement Safe in Long-tail?

arXiv:2606.16313v1 Announce Type: cross Abstract: Long-tail scenarios remain a major bottleneck for autonomous driving evaluation, even as datasets grow by orders of magnitude. Existing evaluation pipelines are rarely human-aligned, safety-aware, verifiable, and explainable at the same time: closed-loop metrics often saturate among strong planners, while unstructured human ratings can be noisy without a carefully designed protocol. We formulate planning evaluation as additional-threat detection: given a planner trajectory and an expert reference, does the planner's displacement introduce new unsafe driving behavior? We propose FluidTest, an evaluation pipeline with three components: a pairwise WebUI protocol for reliable human annotation; a taxonomy of 32 semantic threats with evidence-grounded decision graphs; and a three-agent verification system with reflection for precision and auditability. Experiments on the WOD-E2E dataset show that FluidTest produces consistent labels among trained annotators and identifies additional threats in 65% of Poutine trajectories and 51% of RAP trajectories. These results show that state-of-the-art planners can still exhibit substantial safety-relevant failures despite high Rater Feedback Scores (RFS) and low Average Displacement Error (ADE). Additional details, guidance, and code are available at https://fluidtest.web.app.

02.
arXiv (CS.AI) 2026-06-16

Looking Is Not Picking: An Attention-Segment Account of Tool-Selection Failures in LLM Agents

作者:

arXiv:2606.16364v1 Announce Type: new Abstract: LLM agents mis-call tools, and the natural guess is that the model failed to see the right tool in a crowded harness. We show the opposite through a lens concurrent work sets aside – the model's attention to labeled tool-definition segments. On real BFCL failures, by per-candidate attention argmax the model attends most to the correct tool 80% of the time (vs. 21% chance), and the gold is the under-attended segment on only 10%: it looks at the right tool and still picks wrong. This directly refutes the intuitive "crowded-harness / lost-in-the-middle" explanation: the failure is at the decision readout, not the harness, and we pin it there three ways. (1) Input vs. readout: repairing the prompt (reordering or duplicating the gold tool) recovers

03.
arXiv (CS.AI) 2026-06-18

Enhancing Fatigue Detection through Heterogeneous Multi-Source Data Integration and Cross-Domain Modality Imputation

arXiv:2507.16859v5 Announce Type: replace-cross Abstract: Fatigue detection for human operators is important in safety-related applications such as aviation, mining, and long-haul transport. Reliable estimation of operator fatigue can support timely warnings, adaptive task scheduling, takeover reminders, and other safety-management decisions in human-machine systems. However, the effectiveness of these functions depends on whether fatigue-related signals can be reliably captured in the deployment environment. While many studies have shown the value of high-fidelity sensors in controlled laboratory environments, their performance often degrades when used in real-world settings because of noise, lighting conditions, and field-of-view constraints, thereby limiting their practical use. This paper formalizes a deployment-oriented setting for real-world fatigue detection, where high-quality sensors are often unavailable in practical applications. To address this issue, we use knowledge from heterogeneous source domains, including high-fidelity sensors that are difficult to deploy in the field but commonly used in controlled environments, to assist fatigue detection in the real-world target domain. Based on this idea, we design a heterogeneous and multi-source fatigue-detection framework that uses the available modalities in the target domain while leveraging diverse configurations in the source domains through cross-domain modality imputation based on shared modalities.

04.
arXiv (CS.AI) 2026-06-12

Benchmarking Counterfactual Prediction in Epidemic Time Series with Time-Varying Interventions

arXiv:2606.05692v2 Announce Type: replace-cross Abstract: Deep learning has enabled significant advances in time-series causal inference, yet progress remains constrained by the lack of realistic benchmarks with observable counterfactual outcomes. Existing datasets either rely on real-world observations without ground-truth counterfactuals or on simplified simulations that fail to capture complex causal dynamics. To address this gap, we develop a large-scale benchmark for counterfactual prediction in epidemic time series under dynamic interventions. Unlike existing benchmarks, it supports static and time-varying treatments, as well as both single-policy and multi-policy intervention settings, enabling evaluation of causal inference methods across a broad range of causal inference scenarios. Leveraging a calibrated agent-based model grounded in real-world demographic, mobility, epidemiological, and policy data, we generate realistic counterfactual trajectories across more than 150 U.S. counties. Using this benchmark, we evaluate widely used and state-of-the-art causal inference methods, revealing substantial performance differences and highlighting the challenges of realistic time-series causal reasoning.

05.
arXiv (CS.CL) 2026-06-11

Fanar-Sadiq: A Multi-Agent Architecture for Grounded Islamic QA

Large language models (LLMs) can answer religious knowledge queries fluently, yet they often hallucinate and misattribute sources, which is especially consequential in Islamic settings where users expect grounding in canonical texts (Qur'an and Hadith) and jurisprudential (fiqh) nuance. Retrieval-augmented generation (RAG) improves grounding, however, a single retrieve-then-generate pipeline is insufficient for diverse Islamic queries, including verbatim scripture, citation-grounded guidance, and rule-constrained computations such as zakat and inheritance. To address these challenges, we present Fanar-Sadiq, a bilingual Arabic-English Islamic QA system built on a multi-agent, tool-augmented architecture. It is a core component of the Fanar AI platform. Fanar-Sadiq routes Islamic queries to specialized modules within an agentic tool architecture. It supports intent-aware routing, retrieval-grounded fiqh answers with normalized citations and verification traces, exact verse lookup with quotation validation, and deterministic Sunni zakat and inheritance calculators with madhhab-sensitive branching. We evaluate the end-to-end system on public Islamic QA benchmarks and show strong effectiveness and efficiency. It is publicly accessible through an API and Web application and has received over 1.9M accesses in less than a year (https://api.fanar.qa/docs).

06.
arXiv (CS.LG) 2026-06-15

Lifted Schrödinger Bridges for Gaussian Mixture Endpoints: Projection Gaps and Path-Space Obstructions

arXiv:2605.24795v2 Announce Type: replace-cross Abstract: We study stochastic density control between Gaussian-mixture endpoint distributions under Brownian prior dynamics. Since the direct Schrödinger bridge between Gaussian mixtures is generally not available in closed form, we introduce a lifted path-space construction in which each trajectory is augmented with a source–target component label. Consequently, the problem decomposes into Gaussian component-to-component Schrödinger bridges with explicit marginal, drift, and cost formulas, while the mixture-level assignment reduces to a finite-dimensional entropic coupling problem with a Sinkhorn scaling form. We then analyze the projection obtained by discarding or forgetting the label. By construction, the projected law satisfies the original Gaussian-mixture endpoint constraints, but its relative entropy generally differs from the lifted relative entropy by a nonnegative conditional label-information gap. This gap reveals a path-space obstruction: the lifted optimizer cannot, in general, be identified with the direct unlabeled Schrödinger bridge after projection. We also derive the posterior-averaged Markov drift associated with the projected marginal flow, prove a kinetic-energy upper bound, and identify a common path-potential condition under which the projection gap vanishes. Several numerical illustrations showing density and shape control are recorded for a self-contained exposition.

07.
arXiv (CS.CV) 2026-06-16

Sex-based Network-Specific Differences in Connectomes: A Krakencoder-Based Analysis

This study examines how deficiencies in one brain connectome modality propagate to the other, using the Krakencoder as a simulation framework. Structural and functional connectomes from 702 healthy participants in the Human Connectome Project were analyzed, with the impact of each of the Yeo-7 functional networks assessed separately. Seven scenarios were considered, each involving the removal of a single network while the remaining networks were preserved. The resulting perturbations in cross-modal predictions were quantified using three complementary metrics: KL divergence on eigenvalue spectra, Frobenius norm, and Wasserstein distance. In addition, the persistence of sex-specific information within the predicted connectomes was evaluated. Across all metrics and both prediction directions, the Default Mode Network produced the largest perturbations, whereas the Somatomotor network yielded the smallest. Sex differences in network-level perturbation signatures were subtle, with the best result being an accuracy of 66.09% from connectomes predicted under network-removal conditions. In contrast, connectomes predicted from intact inputs achieved substantially higher sex classification accuracy, reaching up to 84.76%. These findings confirm that full predicted connectomes retain considerably more sex-discriminative information than perturbation-derived signatures alone.

08.
arXiv (CS.LG) 2026-06-11

Urban Heat MiniCubes: An AI-Ready dataset for urban heat research

arXiv:2606.11534v1 Announce Type: cross Abstract: Urban heat is amplified by impermeable surfaces and heterogeneous built environments, yet street-level variability remains difficult to quantify because multi-sensor observations are rarely available in consistent, analysis-ready form at the necessary spatiotemporal scales. We present "Urban Heat MiniCubes," a publicly available, FAIR-oriented dataset designed for machine learning applications in urban heat research. The dataset provides harmonized 90 x 90 km gridded data cubes for 48 cities in the Western Hemisphere spanning 2022-2023, with variables reprojected and collocated to a common grid to reduce preprocessing (e.g., reprojection, resampling, and spatiotemporal alignment). Urban Heat MiniCubes includes two complementary modalities: (i) higher-spatial-resolution, lower-frequency observations from Landsat 8/9 (e.g., surface reflectances) and Sentinel-1 (e.g., synthetic aperture radar backscatter), and (ii) higher-temporal-frequency, coarser observations from GOES-R (e.g., longwave infrared brightness temperatures) and a microwave land surface temperature product. We document variables and metadata and provide technical assessment using inter-variable analyses and autoencoder-based reconstruction-error summaries across pixel classes (e.g., water and cloud). Potential use cases and limitations are also discussed.

09.
arXiv (CS.LG) 2026-06-17

Constrained Diffusion Models with Primal-Dual Inference

arXiv:2606.17192v1 Announce Type: new Abstract: This paper develops constrained diffusion models with primal-dual inference (PDI) to sample from optimal distributions of entropy-regularized optimization problems with average constraints. We formalize constrained sampling in the Lagrangian dual domain, where the optimal distribution takes the form of a Gibbs distribution indexed by the optimal dual variable. Rather than estimating this dual multiplier before sampling and freezing it throughout generation, PDI jointly infers the optimal primal distribution and its parametrizing dual variable. Each reverse diffusion step denoises using the score field associated with the current multiplier and then updates the multiplier through dual ascent using the estimated constraint violation of the denoised samples. To enable this conditional score field, we train a single dual-conditioned score network over the family of Gibbs distributions induced by the dual variables encountered during inference. We prove that the time average of the dual variables generated along the inference trajectory converges to a neighborhood of the dual optimum and bound the effect of residual dual mismatch on the terminal distribution through schedule-dependent stability factors. We evaluate PDI on constrained sampling from a mixture of Gaussians, wireless resource allocation, and portfolio management.

10.
arXiv (CS.CL) 2026-06-12

LoHoSearch: Benchmarking Long-Horizon Search Agents Beyond the Human Difficulty Ceiling

Search agent benchmarks exemplified by BrowseComp have rapidly saturated over the past year, with the strongest models surpassing 90% accuracy. Since these benchmarks are predominantly human-authored, annotators lack a global perspective on entity statistics and cannot systematically maximize search space size and structural complexity. This creates a difficulty ceiling that is hard to break. To address this, we introduce LoHoSearch (Long-Horizon Search Agents), a challenging benchmark comprising 544 human-verified questions across 11 domains. LoHoSearch is constructed via an automated pipeline built upon a knowledge graph covering over 7 million Wikipedia entities, which selects relations with large search spaces and assembles them into structurally complex questions with KG-verified unique answers. Our evaluation demonstrates that even the strongest model achieves only 34.74% accuracy, and existing context management strategies (best +6.8%) yield far smaller gains than on prior benchmarks. LoHoSearch provides a more demanding standard for evaluating long-horizon reasoning and context management in search agents.

11.
arXiv (CS.CV) 2026-06-24

3D Masked Autoencoders are Robust Learners of Volumetric and Multimodal Cellular Representations for Microscopy

Self-supervised learning in fluorescence microscopy often relies on 2D projections, despite the inherently three-dimensional nature of cells. We present a systematic comparison of 2D and 3D masked autoencoders (MAE-2D vs. MAE-3D) on volumetric microscopy data. Under matched architectures and training protocols, MAE-3D consistently outperforms 2D max-projection and slice-based variants on downstream single-cell tasks. We further align visual representations with a pretrained protein language model (ESM2) and show that cross-modal supervision yields larger gains for volumetric models. Channel cross-attention and frequency-domain regularization are critical for leveraging 3D spatial context. On a protein–protein interaction task, MAE-3D achieves a ROC–AUC of 0.865, outperforming prior methods by up to +0.025. For protein localization, our best 3D model attains state-of-the-art AUC$_{micro}$ (0.952) and F1$_{micro}$ (0.742), improving over previous approaches by +0.003 and +0.010 absolute, respectively. Overall, these results demonstrate the advantages of native 3D modeling and multimodal alignment for representation learning in single-cell microscopy.

12.
arXiv (CS.AI) 2026-06-15

No Accidental Software Agent First Canonical Code for Human Code Entropy Reduction and 30 to 500 times Lower Frontier Model Requirements

arXiv:2606.14357v1 Announce Type: cross Abstract: Frontier coding models may spend substantial capacity learning not only program behavior, but also accidental entropy in human repositories. Such repositories contain valuable signals: tests, incidents, migrations, edge cases, product judgment, and operational history. These signals are entangled with framework churn, naming drift, generated-source ambiguity, dependency rituals, CI dialects, weak proof routes, and human-oriented review customs. We propose agent-first canonical code, a proof-carrying substrate that rewrites routine product software into canonical behavior profiles, typed change algebra, proof lanes, constrained edit grammars, semantic patch cells, runtime negative memory, and proof-carrying change objects. The core hypothesis is that quotienting software by behavior equivalence under a declared oracle can collapse equivalent encodings into governed representatives with explicit evidence and proof obligations. The endpoint is amortized cost per verified correct change, including source, context, reasoning, tools, verification, security, provenance, review, failed loops, defects, and foundry cost under a common oracle. Reported reduction bands are hypotheses, not measured frontier results. The proposed limit is a No-Accident Horizon: removable accident decreases until residual novelty, evidence, governance, risk, and future optionality dominate. For supported routine-product distributions, this gives a defensible planning target near 100-fold all-in cost reduction, not a guarantee for all software. Preliminary QLoRA experiments on Qwen2.5-Coder-14B show that 64,088 canonical trajectories are learnable and suppress tested forbidden-language markers, but do not establish behavior preservation, scaling economics, or verified-change cost. The contribution is a falsifiable program centered on minimum functional description length and verified-change cost.

13.
arXiv (math.PR) 2026-06-11

An Information-Theoretic Analysis of Threshold Group Testing

arXiv:2606.11353v1 Announce Type: cross Abstract: We study the Threshold Group Testing (TGT) problem in the noiseless and non-adaptive setting, where the objective is to exactly recover a sparse binary vector from pooled tests, using as few tests as possible. In TGT, each test applied to a subset of items returns a positive outcome if the number of 1's (defective items) in that subset meets or exceeds a specified threshold, and has a negative outcome otherwise. We investigate how the complexity of TGT compares to that of Classical Group Testing (CGT), corresponding to the special case of the threshold equal to one, and analyse the impact of increasing the threshold on the required number of tests. Our main contribution is the derivation of a sharp information-theoretic phase transition at $c_{\mathrm{inf}}^{\mathrm{TGT}}k\log(n/k)$ (non-adaptive) tests for TGT within the constant-column test design. The threshold constant $c_{\mathrm{inf}}^{\mathrm{TGT}}$ is expressed as a function of the prevalence of defectives and the threshold value. Our upper bound is derived under an analytic assumption, and we verify that this assumption is satisfied for a threshold value of 2. The value of $c_{\mathrm{inf}}^{\mathrm{TGT}}$ reveals that TGT on the constant-column design has the same information-theoretic behaviour as CGT in the low-prevalence regime. Yet, strikingly, at higher prevalences, the threshold leads to a significant reduction in the number of tests. On the other hand, we provide evidence that when the asymptotic proportion of defective items is positive, TGT actually becomes strictly harder than CGT (excluding trivial reductions).

14.
arXiv (CS.CL) 2026-06-16

MosaicQuant: Inlier-Outlier Disaggregation for Unified 4-Bit LLM Quantization

4-bit quantization significantly reduces the memory footprint and accelerates the inference of large language models (LLMs). However, its limited bit-width representation struggles to faithfully capture both dense common values (inliers) and rare large-magnitude values (outliers), causing substantial accuracy degradation. Existing mixed-precision methods mitigate this by retaining outliers in high precision, but at the cost of breaking the uniformity of low-bit execution, introducing precision conversion and extra data movement that undermine practical speedup. We propose MosaicQuant, a unified 4-bit LLM quantization paradigm built on a novel principle of inlier–outlier disaggregation. Rather than elevating outlier precision, MosaicQuant quantizes the full weight matrix into a dense 4-bit base component, where inliers are captured faithfully while outlier are inevitably quantized. A sparse 4-bit residual component is then introduced to compensate for these quantization errors, selectively targeting the most error-critical weight blocks where output distortion is shown to be concentrated. However, a unified representation alone is insufficient, as naïvely executing the sparse residual as a separate kernel still breaks the unified low-bit inference pipeline. To bridge this gap, we introduce ZipperEngine, which fuses sparse block computation into the dense 4-bit GEMM kernel via an overlapped pipeline, unifying not only the representation but also the execution into a single coherent low-bit inference pipeline. Extensive experiments on LLaMA3 and Qwen3 demonstrate that MosaicQuant preserves near-FP16 accuracy while achieving up to $1.24\times$ speedup over the W16A16 baseline.

15.
arXiv (CS.CL) 2026-06-11

Organize then Retrieve: Hierarchical Memory Navigation for Efficient Agents

Large language model (LLM) agents struggle with long-horizon tasks due to their inherent statelessness, requiring all task-relevant information to be encoded in growing input contexts. The resulting degraded reasoning quality, increased inference cost, and higher latency necessitate efficient working memory mechanisms. However, existing approaches either rely on lossy compression or similarity-based retrieval, which often fail to capture temporal structure and causal dependencies required for multi-step agentic tasks. In this work, we present HORMA, a Hierarchical Organize-and-Retrieve Memory Agent that organizes experience into a file-system-like hierarchical structure, where summarized entities are linked to the corresponding raw trajectories, enabling efficient access without losing detailed information. HORMA decomposes working memory into two stages: structured memory construction and navigation-based retrieval. The construction module iteratively refines how experiences are structured by distinguishing between failures caused by missing information and those caused by misleading or overloaded context. The navigation module retrieves task-relevant context by traversing the hierarchy using a lightweight agent trained with reinforcement learning to select minimal yet sufficient context, thereby reducing latency along the critical execution path. Across ALFWorld, LoCoMo, and LongMemEval, HORMA improves task performance under constrained context budgets while requiring at most 22.17% of the baseline token usage in long conversation tasks. Compared to existing methods, it consistently achieves better efficiency-performance trade-offs and generalizes effectively to unseen tasks.

16.
arXiv (CS.AI) 2026-06-19

BIM-Edit: Benchmarking Large Language Models for IFC-Based Building Information Modeling

arXiv:2606.20146v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly applied to computer-aided design (CAD) to generate design artifacts from textual instructions. In engineering practice, this requires more than creating new geometry, models must also understand existing scenes, edit them correctly, and preserve semantics and relations. However, many CAD benchmarks focus on creating new models rather than editing existing ones, and mostly evaluate geometric correctness. We introduce BIM-Edit, a benchmark for evaluating LLMs on natural-language editing of Building Information Models (BIM) represented in the Industry Foundation Classes (IFC) format. BIM provides a challenging testbed because building models encode geometry together with semantic and relational structure. BIM-Edit contains 324 editing tasks spanning 11 realistic building models and 36 synthetic scenes. Tasks are expressed using three instruction categories - direct, spatial, and topological - covering both explicit and scene-grounded edits. We evaluate outputs along three dimensions: geometric accuracy, semantic validity, and topological consistency. Across evaluated LLMs, the best-performing model achieves only 49.5% average score across the three metrics, and no model fully solves more than 3.4% of tasks. These results demonstrate a substantial gap between current LLM capabilities and the requirements of structured engineering design workflows.

17.
medRxiv (Medicine) 2026-06-16

Development of an automated, imaging-based preoperative screening model for early identification of malnutrition in an abdominal surgery cohort

Background: Clinical malnutrition affects one in five abdominal surgery patients and increases postoperative complications and mortality. Current screening occurs after admission, closing the window for preoperative nutritional intervention. No objective, scalable preoperative screening tool exists. Objective: To determine whether automated volumetric CT-based body composition analysis improves preoperative identification of surgical patients at risk for clinical malnutrition compared to clinical variables or single slice imaging alone. Methods: Retrospective cohort study of adults undergoing elective abdominal surgery at a quaternary academic medical center (2018 to 2021) with a preoperative CT scan within 90 days and complete nutrition assessment. Clinical malnutrition was diagnosed by a registered dietitian using ASPEN/AND criteria. Three sex stratified Elastic Net models were compared: (1) base clinical variables; (2) base plus L3 single slice skeletal muscle index and attenuation; and (3) base plus comprehensive 3D volumetric quantification of five muscle groups and two fat depots. Discrimination (AUROC), calibration (Brier score), and clinical utility (decision curve analysis) were assessed via 10-fold cross-validation. Results: Among 1,143 patients (52.4% female; mean age 60.5 years), 231 (20.2%) were diagnosed with malnutrition. Malnourished patients had significantly higher complication rates (36.4% vs. 15.4%, p

18.
arXiv (CS.CV) 2026-06-16

GeoRoPE: Ground-Aware Rotary Adaptation for Remote Sensing Foundation Models

Remote-sensing foundation models (RSFMs) benefit from pretraining on imagery from multiple sensors and ground sampling distances (GSDs), but such exposure alone does not resolve scale mismatch during downstream adaptation. A fixed token-grid offset can correspond to different ground distances across sensors, making grid-based positional priors physically inconsistent. Meanwhile, heterogeneous spatial granularity means that compact urban regions and homogeneous landscapes may require different positional sensitivities even under the same GSD. Therefore, we propose {GeoRoPE}, a ground-aware, RoPE-compatible, and parameter-efficient spatial adaptation method for RSFMs. GeoRoPE recalibrates token-level positional interactions from two complementary aspects. First, Geo-Coordinate Calibration (GCC) rescales raw token-grid offsets according to the ground distance represented by one token-grid step, producing geo-calibrated relative coordinates across GSDs. Second, Geo-Frequency Calibration (GFC) adjusts the native RoPE frequency with a relation-specific factor, enabling position sensitive adaptation to scene-dependent spatial granularity. GeoRoPE is injected into pretrained RSFMs through a lightweight adapter, preserving the frozen spatial prior while adding geo-aware positional corrections. Experiments across multiple RSFMs, sensors, resolutions, and downstream tasks demonstrate that GeoRoPE improves cross-resolution robustness and scale-sensitive representation learning.

19.
arXiv (CS.AI) 2026-06-17

FllumaOne: A Code-Native Multimodal CAD Dataset with Executable Programs and Kernel-Validated Feature Histories

作者:

arXiv:2606.17696v1 Announce Type: new Abstract: Parametric computer-aided design records both final geometry and the ordered construction history that determines how a part can be edited. Datasets for editable CAD research should therefore expose modeling operations, parameters, and feature dependencies together with validated geometry. We introduce FllumaOne, a code-native multimodal CAD dataset whose models are generated by executable Python programs in Flluma, a Qt/C++ OpenCASCADE-based CAD system. Each sample aligns its program with a structured feature tree, a training-oriented intermediate representation, STEP geometry, a surface point cloud, natural-language descriptions, metadata, and eight canonical visible-edge renderings. The primary release, FllumaOne-100K, contains 100,000 accepted samples across four template-level complexity regimes. Programs are executed and retained only after kernel geometry, solid validity, and export checks; release reports also record modality completeness and split-level duplicate tests. A Qwen2.5-Coder-1.5B LoRA baseline trained on 80,000 samples achieves 99.98% Python syntax validity, 99.97% Flluma build success, and 99.14% STEP-export validity on the held-out 10,000-sample test split. For the 9,909 predictions converted to surface point clouds, the mean normalized Chamfer Distance is 0.002124. The dataset supports conditioned CAD reconstruction, executable program synthesis, feature-tree prediction, B-Rep analysis, retrieval, design completion, and editable reverse engineering.

20.
bioRxiv (Bioinfo) 2026-06-11

Viability of engineered AAVs via protein language models

Capsid engineering has greatly improved the performance of recombinant AAV vectors used for gene therapy. One commonly used strategy is the insertion of a short, 7-mer, peptide into surface-exposed loops to modify receptor interactions and enhance cell entry. While effective in receptor retargeting and improved transduction, these insertions might destabilize the capsid protein, hinder assembly, and thus limit production. While previous attempts have used deep mutational scanning and AI to predict which insertions are viable, there is lack in understanding the structural consequences of these peptide insertions at the amino-acid level. Here we combined experiments, deep sequencing and large protein language models to gain insight on the impact of 7-mer insertions on the VR-VIII region. We first characterize the biochemical properties of viable insertions, thus identifying which residues are well tolerated, and which should instead be avoided. We then focus on the nearby context of those insertions, by studying the effect of the linkers, either for highly diverse libraries or for individual variants known for their efficiency. Next, we study the broader context, by extending our analysis to the whole capsid sequence, and identifying regions that can tolerate insertions without long-ranged structural deformations that could affect capsid functionality. We conclude with a cross-serotype comparison and a viability analysis of tens of previously engineered variants. Our work showcases how AI can uncover structure-function rules governing the success of engineered AAV capsids.

21.
bioRxiv (Bioinfo) 2026-06-11

A systematic imputation framework for sparse, multimodal space biology datasets: application to retinal imaging and omics from the RR9 mission

Space biology experiments are expensive, logistically complex, and inherently limited in sample size, resulting in datasets that are frequently incomplete and highly heterogeneous (2). Missing data is a fundamental barrier to building reliable computational models of how the human body responds to spaceflight. This work introduces a systematic framework for addressing missing data through imputation. We developed a validated four-stage framework for imputation specifically designed to preserve biological signal needed for digital twin development, while quantifying trade-offs in downstream analyses. Using retinal imaging and omics data from the NASA RR9 mission as a case study (9), we demonstrate how to diagnose why data is missing(10), select and optimize appropriate imputation strategies (5,10), and rigorously evaluate whether imputed data remains biologically meaningful. A key finding of this work is that while imputation substantially improves the performance of predictive models, it can simultaneously obscure subtle biological patterns; a critical trade-off that researchers must understand before applying these methods (11). This framework provides practical, actionable guidance for space biologists and data scientists working with sparse, multimodal datasets in space biology, and represents a foundational step toward more complete and reliable data-driven models of human physiology in extreme environments.

22.
arXiv (CS.LG) 2026-06-19

Multi-Modal Contrastive Learning for Implicit Earth Embeddings via Location Tying

arXiv:2606.20167v1 Announce Type: new Abstract: Spatial prediction tasks are often limited by a lack of high-quality labelled ground-truth observations. To overcome this challenge, self-supervised pre-training is a possible solution, with contrastive learning dominant for location encoders. Those approaches usually align geographic coordinates with just one additional modality. We propose two multimodal contrastive learning architectures: Multimodal Embedding via Location Tying (MELT) and Sequential Alternating Location Training (SALT). These architectures expand this framework beyond two modalities by utilising unpaired geospatial data. Both methods are technically viable and match the performance of the strongest two-modality baseline (SATCLIP) across four downstream tasks. However, increasing the number of modalities does not consistently improve performance, suggesting that the chosen location encoder is the main limitation - the contrastive objective reaches its peak early, regardless of modality diversity or pre-training volume. MELT provides more stable training than SALT and presents a stronger foundation for future scaling.

23.
arXiv (CS.AI) 2026-06-17

Learning-Infused Formal Reasoning: From Contract Synthesis to Artifact Reuse and Formal Semantics

arXiv:2602.02881v2 Announce Type: replace-cross Abstract: This paper articulates a long-term research vision for formal methods at the intersection with artificial intelligence, outlining multiple conceptual and technical dimensions and reporting on our ongoing work toward realising this vision. It advances a forward-looking perspective on the next generation of formal methods based on the integration of automated contract synthesis, semantic artifact reuse, and refinement-based theory. We argue that future verification systems must builds towards individual correctness proofs toward a cumulative, knowledge-driven paradigm in which specifications, contracts, and proofs are continuously synthesised and transferred across systems. To support this shift, we outline a hybrid framework combining large language models with graph-based representations to enable scalable semantic matching and principled reuse of verification artifacts. Learning-based components provide semantic guidance across heterogeneous notations and abstraction levels, while symbolic matching ensures formal soundness. Grounded in compositional reasoning, this vision points toward verification ecosystems that evolve systematically, leveraging past verification efforts to accelerate future assurance.

24.
arXiv (CS.CV) 2026-06-15

Digital Twin Driven Textile Classification and Foreign Object Recognition in Automated Sorting Systems

The increasing demand for sustainable textile recycling requires robust automation solutions capable of handling deformable garments and detecting foreign objects in cluttered environments. This work presents a digital twin driven robotic sorting system that integrates grasp prediction, multi modal perception, and semantic reasoning for real world textile classification. A dual arm robotic cell equipped with RGBD sensing, capacitive tactile feedback, and collision-aware motion planning autonomously separates garments from an unsorted basket, transfers them to an inspection zone, and classifies them using state of the art Visual Language Models (VLMs). We benchmark nine VLM s from five model families on a dataset of 223 inspection scenarios comprising shirts, socks, trousers, underwear, foreign objects (including garments outside of the aforementioned classes), and empty scenes. The evaluation assesses per class accuracy, hallucination behavior, and computational performance under practical hardware constraints. Results show that the Qwen model family achieves the highest overall accuracy (up to 87.9 %), with strong foreign object detection performance, while lighter models such as Gemma3 offer competitive speed accuracy trade offs for edge deployment. A digital twin combined with MoveIt enables collision aware path planning and integrates segmented 3D point clouds of inspected garments into the virtual environment for improved manipulation reliability. The presented system demonstrates the feasibility of combining semantic VLM reasoning with conventional grasp detection and digital twin technology for scalable, autonomous textile sorting in realistic industrial settings.

25.
bioRxiv (Bioinfo) 2026-06-17

Beyond phylogeny: Genome-wide DNA sequence patterns suggest DNA physical properties associated with thermal adaptation in extremophile microbes

Temperature is a fundamental constraint on biological systems, yet how it is reflected in genome sequence organization remains unclear. Here, we show that genome-wide distributions of short DNA sequences contain a robust signal of thermal adaptation that is largely independent of phylogeny. Using Structural Topic Modelling (STM), a machine-learning approach for identifying groups of co-occurring sequence motifs, we analyze canonical 6-mer and 9-mer frequency profiles of bacterial and archaeal genome proxies (randomly sampled genomic regions) and identify motif families systematically associated with thermophiles and psychrophiles. In bacterial thermophiles, the identified motif families are dominated by highly specific, overrepresented and co-occurring C- and G-stacked hexamers, and a distinct family of CG-periodic hexamers recurring across multiple temperature comparisons. In contrast, bacterial psychrophile-associated motifs are dominated by low-complexity A-, T-, and AT-run hexamers. Thermophilic archaea generally exhibit a distinct CTAG-centred hexamer family, suggesting that different domains may adapt to similar environmental constraints through different sequence-level solutions. However, this domain-level contrast is not absolute: in a targeted analysis of two thermophilic bacterium–archaeon pairs, we find unusually similar frequencies of all the STM-identified thermophile-associated hexamer families, suggesting that shared high-temperature environments can, in specific cases, partially override phylogenetic divergence. Notably, the identified motif families constitute only a small and highly selective subset of the vast space of possible G+C-rich or A+T-rich sequences. This indicates that thermal adaptation is associated with specific sequence architectures rather than broad shifts in nucleotide composition. Accordingly, the observed signal cannot be explained by overall base composition alone, but instead arises from structured combinations and positional arrangements of nucleotides within short sequence contexts. Related motif families are recovered at both k=6 and k=9, indicating that the signal reflects systematic shifts in genome-wide sequence organization rather than isolated sequence motifs. These patterns are consistent with known sequence-dependent DNA physical properties documented in biochemical and biophysical studies, including differences in base-stacking interactions and conformational flexibility. Together, our results suggest that genome-wide sequence organization reflects sequence-dependent DNA physical properties associated with thermal adaptation, revealing a previously underappreciated physical layer of genomic information beyond phylogenetic history.