Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-17

Clinical Study Protocol of the 'Biomarkers of Severity of COVID-19 Patients' (BIOMARCOVID) Project

Introduction The coronavirus disease 2019 (COVID-19) pandemic has challenged health care systems worldwide, in certain areas exceeding hospital capacities and human resources. This has underscored the importance of having better tools to predict the outcome of potentially severe respiratory infections such as SARS-CoV-2. Predicting COVID-19 severity may allow physicians to better manage ICU beds and increase the chances of patient survival through appropriate management. During the toughest months of the pandemic, most physicians tried to identify patients that might develop severe forms based primarily on clinical features on admission (e.g., BMI, age). In this context, significant research has focused on identifying comorbidities, clinical manifestations, and routine blood biomarkers to predict disease severity. However, despite the demonstrated value of untargeted metabolomics in assessing severity, limited data exist on its use for identifying novel metabolite biomarkers that could improve both the sensitivity and specificity of outcome prediction. Our goal is to identify metabolite biomarkers that could enhance the predictive accuracy of standard medical biology data and clinical parameters. Methods and analysis This is a retrospective, observational, monocentric cohort study conducted at the Centre Hospitalier Universitaire Grenoble Alpes (CHUGA). The maximum number of eligible patients admitted for PCR-confirmed COVID-19 between March and December 2020 will be included. Severity outcome is defined using the WHO 10-category ordinal scale (mild: categories 4-5; severe: >5). Blood samples were collected within 48 hours of admission and analyzed for 62 routine blood tests and untargeted multiplatform LC-MS/MS metabolomics across four national platforms. Statistical analysis will include logistic regression with variable selection for the primary aim, and multi-block chemometric integration of clinical, biological, and metabolomics data as a secondary aim. Ethics and dissemination A study steering committee has been formed to ensure the accuracy of the collected data by thoroughly reviewing it prior to the data lock. All aspects of the study comply with ethical standards, including approval by the CHUGA institutional review board and adherence to CNIL Reference Methodology MR004 for the protection of participants' rights, privacy, and confidentiality. This study is registered on the French Health Data Hub (number F20210218154851). Results will be disseminated through peer-reviewed publications, presentations at national and international scientific and clinical conferences, and reports shared with key healthcare system stakeholders.

02.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

作者:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

03.
arXiv (CS.AI) 2026-06-19

Analyzing the Narration Gap in LLM-Solver Loops

arXiv:2606.19588v1 Announce Type: new Abstract: Formal tools such as SAT and SMT solvers are increasingly embedded in language model reasoning pipelines when a safety or security critical question can be formulated in logic. Unlike chain of thought whose steps are sampled from the model distribution without formal guarantee, a solver produces a sound and independently verifiable answer. However, the soundness guarantee can be lost in the interaction between the solver and the model. The hybrid pipeline has three components: formalizing the question, deciding it, and narrating the result. Prior work has studied the formalization and decision, but not narration, which is the step that turns a formal tool's output into the user answer. To fill the narration gap, we first model the LLM-solver loop as a verified decision procedure. We further evaluate five open-sourced models under prompt injection, and we find certificate gating makes the solver verdict sound, while an adversary can invert a verified conclusion across phrasings and channels. We study the mitigation through hardened prompt that reduces injection significantly but cannot eliminate it and still suffers under adaptive attack. Combining the formal analysis and empirical studies, we show in the LLM-solver loop, robustness does not reach to the answer that the user finally reads.

04.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

05.
arXiv (CS.AI) 2026-06-19

OnDeFog: Online Decision Transformer under Frame Dropping

arXiv:2606.19721v1 Announce Type: cross Abstract: In challenging real-world reinforcement learning applications, communication delays or sensor failures often cause frame dropping, in which the agent cannot receive the dropped states and associated rewards. To address the performance degradation caused by frame dropping, the Decision Transformer under Random Frame Dropping (DeFog) was developed by incorporating additional mechanisms into the decision transformer to tackle frame dropping. Although DeFog can mitigate performance degradation in frame-dropping environments, since DeFog is an offline learning method, it struggles to effectively generalize to novel states not adequately represented in the training dataset. In this study, we propose OnDeFog, which integrates the mechanisms in DeFog with the online decision transformer (ODT), an online reinforcement learning method that learns policies through direct environmental interaction. Comprehensive experimental evaluation demonstrates that our proposed OnDeFog achieves superior performance compared to ODT in environments characterized by high dropping frame rate and outperforms DeFog on datasets containing a large amount of low-reward data.

06.
arXiv (quant-ph) 2026-06-15

Physics-Informed Variational Quantum Classifier for Phase Detection in Strongly Correlated Matter

arXiv:2606.14489v1 Announce Type: new Abstract: The characterisation of quantum phases in strongly correlated systems is a crucial milestone for the deployment of quantum sensors. In this work, we present a Physics-Informed Variational Quantum Classifier (VQC) designed to detect the topological phase transition between the Fermi polaron quasiparticle and the molecular bound state. Unlike conventional Machine Learning approaches, our quantum architecture is constructed via the Trotterised time-evolution of an effective Hamiltonian, ensuring that the learnable parameters correspond to interpretable physical quantities. We show that the VQC efficiently discovers the optimal interferometric protocol, specifically the evolution time and effective bath interactions required to maximise the visibility of Ramsey fringes, thereby clearly distinguishing the Bose-Einstein Condensate (BEC) and Bardeen-Cooper-Schrieffer (BCS) regimes. Furthermore, we report the validation of this classifier on the QRed superconducting quantum processor (BSC-CNS). Despite the intrinsic hardware noise and decoherence, the VQC preserves the relative ordering of the topological phases. We demonstrate that the physics-informed architecture achieves a linear gate complexity $\mathcal{O}(N)$, bypassing the exponential memory wall of classical simulation and ensuring scalability to many-body regimes.

07.
arXiv (CS.LG) 2026-06-11

Breaking the Ice: Analyzing Cold Start Latency in vLLM

arXiv:2606.07362v2 Announce Type: replace Abstract: As scalable inference services become popular, the cold start latency of an inference engine becomes important. Today, vLLM has evolved into the de facto inference engine of choice for many inference workloads. Although popular, due to its complexity and rapid evolution, there has not been a systematic study of its startup latency. With major architectural innovations such as the V1 API and the introduction of torch.compile, this paper presents the first detailed performance characterization of vLLM startup latency. We break down the startup process into six foundational steps and demonstrate that it is predominantly CPU bound. Each step exhibits consistent and interpretable scaling trends with respect to model-level and system-level parameters, enabling fine-grained attribution of latency sources. Building on these insights, we develop a lightweight analytical model that accurately predicts vLLM startup latency for a given hardware configuration, providing actionable guidance for resource planning in large-scale inference environments. All benchmarking datasets, analysis tools, and prediction scripts are open sourced at https://github.com/upb-cn/vllm-startup-profiler.

08.
arXiv (CS.AI) 2026-06-19

BIM-Edit: Benchmarking Large Language Models for IFC-Based Building Information Modeling

arXiv:2606.20146v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly applied to computer-aided design (CAD) to generate design artifacts from textual instructions. In engineering practice, this requires more than creating new geometry, models must also understand existing scenes, edit them correctly, and preserve semantics and relations. However, many CAD benchmarks focus on creating new models rather than editing existing ones, and mostly evaluate geometric correctness. We introduce BIM-Edit, a benchmark for evaluating LLMs on natural-language editing of Building Information Models (BIM) represented in the Industry Foundation Classes (IFC) format. BIM provides a challenging testbed because building models encode geometry together with semantic and relational structure. BIM-Edit contains 324 editing tasks spanning 11 realistic building models and 36 synthetic scenes. Tasks are expressed using three instruction categories - direct, spatial, and topological - covering both explicit and scene-grounded edits. We evaluate outputs along three dimensions: geometric accuracy, semantic validity, and topological consistency. Across evaluated LLMs, the best-performing model achieves only 49.5% average score across the three metrics, and no model fully solves more than 3.4% of tasks. These results demonstrate a substantial gap between current LLM capabilities and the requirements of structured engineering design workflows.

09.
arXiv (math.PR) 2026-06-11

Heat kernel estimates for Markov processes with blowing-up jump kernels

arXiv:2512.24807v2 Announce Type: replace Abstract: In this paper, we establish sharp two-sided heat kernel estimates for a large class of purely discontinuous symmetric Markov processes on closed subsets $F$ of $\mathbb{R}^d$, whose jump kernels blow up on a Borel subset $\Sigma$ of $F$. We assume that $F\setminus \Sigma$ is a $\kappa$-fat set and is dense in $F$. To the best of our knowledge, this is the first work establishing sharp heat kernel estimates for jump processes whose jump kernels blow up on part of the state space. The jump kernels under consideration take the form $J(x,y)=|x-y|^{-d-\alpha}{\mathcal B}(x,y)$, where $\alpha\in (0,2)$ and the function ${\mathcal B}(x,y)$ blows up at a subset $\Sigma$ of $F$. A fundamental obstacle is that the tails of the jump measures are not uniformly bounded, and hence standard techniques in heat kernel analysis do not provide a priori off-diagonal estimates. To overcome this difficulty, we develop a new approach based on weighted integral estimates for the heat kernel that are sensitive to both the blow-up behavior of the jump kernel and the geometry of $F\setminus \Sigma$. Examples of processes falling within our general framework include traces of isotropic $\alpha$-stable processes in $C^{1,\rm Dini}$ sets, processes in Lipschitz sets arising in connection with the nonlocal Neumann problem, and a large class of resurrected self-similar processes in the closed upper half-space.

10.
arXiv (CS.LG) 2026-06-16

From Tokens to Policy: Causal and Interpretable Heterogeneous Treatment Effects Identification

arXiv:2606.17010v1 Announce Type: new Abstract: Heterogeneous Treatment Effect (HTE) identification is crucial to explain the impact of an intervention and optimize our policies accordingly. Existing approaches trade expressivity for interpretability, but, if some active heterogeneity drivers are unmeasured, methods at both ends of this spectrum allow for spurious HTE characterization with no causal reading. In this work, we focus on controlled experiments and argue that an oracle HTE causal characterization via the latent interactors is now within reach, thanks to (i) more extensive pre-treatment measurements, i.e., multi-modal and multi-view, and (ii) scalable representations with minimal human supervision. We then re-frame HTE identification as a Markov-blanket discovery problem on a sufficient and aligned pre-treatment representation, and introduce Neural EXposure Interaction Search (NEXIS), an iterative procedure with provable and empirically validated consistent selection. We deploy NEXIS on two anti-poverty programs in Africa, augmenting each with satellite imagery capturing previously unmeasured environmental effect modifiers, leading to novel, interpretable and prescriptive guidelines to optimize the programs' next iterations.

11.
medRxiv (Medicine) 2026-06-17

Real-World Effectiveness and Safety of Avacopan in ANCA-Associated Vasculitis: A Systematic Literature Review and Meta-analysis

Background: The efficacy and safety of avacopan in ANCA-associated vasculitis (AAV) has been established in randomized trials of of avacopan as a glucocorticoid (GC) sparing therapy. However, real world evidence (RWE) has an important role in confirming effectiveness and evaluating safety in more generalizable settings. This study aimed to synthesize RWE on the effectiveness and safety of avacopan in adults with AAV. Methods: A systematic literature review and meta analysis of non interventional real world studies was conducted in accordance with Preferred Reporting Items for Systematic Reviews and Meta Analyses (PRISMA) guidelines. Eligible studies included adults with AAV treated with avacopan in routine clinical practice. Pooled estimates of effectiveness and safety outcomes were calculated using random effects meta-analyses. Primary outcomes included remission at 6 and 12 months and sustained remission at 12 months. Secondary outcomes included relapse, GC use and dosing, hepatotoxicity, infections, and treatment discontinuation. Exploratory outcomes included changes in estimated glomerular filtration rate (eGFR) and dialysis related endpoints. Results: A total of 71 studies were included and contributed to quantitative analyses. Pooled remission for patients on avacopan was 87% (95% CI: 75%-94%) at 6 months and 93% (95% CI: 86%-97%) at 12 months, and sustained remission was 86% (95% CI: 74%-93%) at 12 months. Relapse at 12 months was low (7%; 95% CI: 4%-11%). GC use was 36% at both 6 and 12 months. Improvements in eGFR were observed at 6 months (18 mL/min/1.73 m2) and 12 months (18 mL/min/1.73 m2), and dialysis liberation was 66% in a limited subset. Among avacopan patients, 11% experienced any hepatotoxicity, including 7% with serious (defined as directly reported or requiring hospitalization) hepatotoxicity, while 7% experienced serious (defined as directly reported or requiring hospitalization) infection. Conclusions: In real world clinical practice, avacopan is associated with high remission rates, low relapse rates, and a consistent GC sparing effect, with effectiveness comparable to standard of care regimens. Findings support its clinical use with appropriate safety monitoring; however, the observed heterogeneity in hepatotoxicity and the limited comparative effectiveness evidence highlight areas requiring further investigation.

12.
arXiv (quant-ph) 2026-06-19

Purity and bound energy in ancilla-assisted work extraction

arXiv:2606.19945v1 Announce Type: new Abstract: We investigate ancilla-assisted work extraction in quantum batteries from the perspective of bound energy and purity. We show that the bound energy of the reduced system provides a tight upper bound to the daemonic gain and that this bound is saturated for globally pure system–ancilla states. Motivated by this relation, we introduce a purity-based gain that qualitatively predicts the daemonic gain without requiring explicit optimization over measurements. We further introduce a protocol to analyze the role of dissipation and intrinsic interactions on daemonic gain. Under a collective environment, dissipation can dynamically generate and stabilize finite daemonic gain through environment-induced correlations. In interacting systems, level crossings and spectral restructuring strongly modify the attainable gain through their influence on the accessible bound energy. Our results demonstrate that daemonic gain is governed not only by correlations, but also by the spectral structure of the underlying Hamiltonian and information loss captured by bound energy and purity.

13.
arXiv (CS.AI) 2026-06-11

Human-Enhanced Loop Modeling (HELM): Agent-Based Finite Element Modeling of Concrete Bridge Barriers

arXiv:2606.12025v1 Announce Type: new Abstract: Finite element (FE) modeling of safety-critical infrastructure such as bridge barriers requires high-fidelity nonlinear dynamic analysis, yet the current FE modeling process remains labor-intensive and lacks automation. This paper presents the Human-Enhanced Loop Modeling (HELM) framework, a collaborative human-agent protocol that decomposes long-sequence finite element modeling into discrete, visually verifiable checkpoints across geometry generation, boundary condition definition, and material assignment. The framework is demonstrated through a 20-case matrix of reinforced concrete bridge barriers under MASH TL-4 and TL-5 lateral loading conditions, interfacing specialized agents with two widely used commercial FE softwares, i.e., ANSYS and LS-PrePost. Experimental results show that HELM improves the baseline autonomous modeling success rate from 20% to 75%, with agent-level pass rates for geometry and boundary condition tasks approximately doubling. Error analysis reveals that spatial reasoning and algebraic logic limitations constitute the primary failure modes, underscoring the value of structured human-in-the-loop intervention for modeling automation. The complete agent design code and prompts are open-sourced and can be accessed at: https://github.com/SimAgentDev/Ansys-LSPP-AgentKit.

14.
arXiv (CS.AI) 2026-06-16

A Perception vs. Distortion Perspective on Score-Based Generative Channel Estimation

arXiv:2606.16815v1 Announce Type: cross Abstract: Driven by their remarkable success in computer vision and inverse problem solving, score-based models are increasingly applied to wireless communications, where they show promise across a range of physical-layer tasks. However, despite this growing interest, the current literature often lacks a rigorous analysis of when score-matching offers a tangible advantage over traditional discriminative learning. This paper aims to address this gap through the use-case of channel estimation, a fundamental inverse problem in wireless systems. We present a theoretically grounded interpretation of score-based channel estimation through the lens of the perception-distortion tradeoff, identifying the conditions where score matching excels as well as its key limitations. In particular, by modeling downstream wireless tasks (e.g., capacity maximization) as functionals of the channel estimation process, we quantify the excess risk incurred by standard distortion-minimization approaches. Extensive numerical results show that under high predictive uncertainty, the large excess risk gap can be offset by score-based estimation, enabling near Bayesian-optimal precoding via the learned posterior, whereas in the low predictive uncertainty regime, discriminative distortion-minimization approaches are preferable due to lower complexity and more efficient use of model capacity.

15.
arXiv (CS.LG) 2026-06-19

MassSpecGym in the Wild: Uncovering and Correcting Evaluation Pitfalls in AI-Driven Molecule Discovery

arXiv:2606.19624v1 Announce Type: new Abstract: Reliable benchmarking is critical for developing machine learning models for tandem mass spectrometry (MS/MS) based molecule discovery. Subtle issues in experimental design and model evaluation procedures can degrade the trustworthiness of such benchmarks and lead to erroneous conclusions. We conduct a thorough review of model evaluation issues in the recent MS/MS machine learning literature, using the standard MassSpecGym benchmark suite as a case study to illustrate the impact of these issues. We find evaluation issues in at least 17 of 26 papers reporting MassSpecGym benchmark results in the first year of its adoption. We isolate three classes of failures: (i) data leakage, (ii) shortcut learning, and (iii) implementation bugs and metric divergence. Through extensive experimentation and code replication, we quantify the impact of these issues and show how they corrupt the evaluation standards MassSpecGym was designed to enforce. We distill our findings into recommendations generalizable to MS/MS challenges, benchmarks, and custom evaluation setups. We also release MassSpecGym v1.5, an implementation of our recommendations in the MassSpecGym benchmarking suite which addresses the failure modes identified in this audit. MassSpecGym v1.5 is publicly available at https://github.com/pluskal-lab/MassSpecGym.

16.
arXiv (CS.AI) 2026-06-16

Orcheo: A Modular Full-Stack Platform for Conversational Search

arXiv:2602.14710v2 Announce Type: replace-cross Abstract: Conversational search (CS) requires a complex software engineering pipeline that integrates query reformulation, ranking, and response generation. CS researchers currently face two barriers: the lack of a unified framework for efficiently sharing contributions with the community, and the difficulty of deploying end-to-end prototypes needed for user evaluation. We introduce Orcheo, an open-source platform designed to bridge this gap. Orcheo offers three key advantages: (i) A modular architecture promotes component reuse through single-file node modules, facilitating sharing and reproducibility in CS research; (ii) Production-ready infrastructure bridges the prototype-to-system gap via dual execution modes, secure credential management, and execution telemetry, with built-in AI coding support that lowers the learning curve; (iii) Starter-kit assets include 45+ off-the-shelf components for query understanding, ranking, and response generation, enabling the rapid bootstrapping of complete CS pipelines. We describe the framework architecture and validate Orcheo's utility through case studies that highlight modularity and ease of use. Orcheo is released as open source under the MIT License at https://github.com/AI-Colleagues/orcheo.

17.
arXiv (quant-ph) 2026-06-15

Synchronization of Quasi-Particle Excitations in a Quantum Gas with Cavity-Mediated Interactions

arXiv:2504.17731v2 Announce Type: replace-cross Abstract: Driven-dissipative quantum systems can undergo transitions from stationary to dynamical phases, reflecting the emergence of collective non-equilibrium behavior. We study such a transition in a Bose-Einstein condensate coupled to an optical cavity and develop a cavity-assisted Bragg spectroscopy technique to resolve its collective modes. We observe dissipation-induced synchronization at the quasiparticle level, where two roton-like modes coalesce at an exceptional point. This reveals how dissipation microscopically drives collective dynamics and signals a precursor to a dynamical phase transition.

18.
arXiv (CS.LG) 2026-06-19

PU-UNet: Stable Multiplicative Interactions for Medical Image Segmentation

arXiv:2606.20035v1 Announce Type: cross Abstract: Many dense prediction networks rely on additive feature transformations and model higher-order feature interactions only implicitly. Product units provide an explicit mechanism for multiplicative feature modeling, but their logarithmic–exponential formulation can cause numerical instability, which has limited their use in deep dense prediction networks. In this work, we propose Product-Unit U-Net (PU-UNet), a residual U-Net that integrates stable product-unit residual blocks into rich low-resolution stages for medical image segmentation. The proposed formulation combines smooth positivity mapping with log-domain clipping, enabling stable multiplicative feature learning with negligible computational overhead. On ISIC 2018, Kvasir-SEG, and BUSI, PU-UNet achieves Dice scores of 0.942, 0.959, and up to 0.925, respectively. Compared with a matched Residual U-Net baseline, PU-UNet consistently improves Dice and IoU while keeping parameters, FLOPs, and inference latency nearly unchanged, and reduces the image-level false-positive rate on normal BUSI cases from 0.077 to zero. Ablation studies suggest that the gains are associated with product-unit interactions, are strongest under low-resolution placement, and benefit from the proposed stabilization design. These results suggest that stable product-unit residual learning can be an effective way to enhance U-Net-style segmentation networks with explicit multiplicative interactions.

19.
arXiv (CS.CV) 2026-06-16

Region-Adaptive Sampling for Diffusion Transformers

Diffusion models (DMs) have become the leading choice for generative tasks across diverse domains. However, their reliance on multiple sequential forward passes significantly limits real-time performance. Previous acceleration methods have primarily focused on reducing the number of sampling steps or reusing intermediate results, failing to leverage variations across spatial regions within the image due to the constraints of convolutional U-Net structures. By harnessing the flexibility of Diffusion Transformers (DiTs) in handling variable number of tokens, we introduce RAS, a novel, training-free sampling strategy that dynamically assigns different sampling ratios to regions within an image based on the focus of the DiT model. Our key observation is that during each sampling step, the model concentrates on semantically meaningful regions, and these areas of focus exhibit strong continuity across consecutive steps. Leveraging this insight, RAS updates only the regions currently in focus, while other regions are updated using cached noise from the previous step. The model's focus is determined based on the output from the preceding step, capitalizing on the temporal consistency we observed. We evaluate RAS on Stable Diffusion 3 and Lumina-Next-T2I, achieving speedups up to 2.36x and 2.51x, respectively, with minimal degradation in generation quality. Additionally, a user study reveals that RAS delivers comparable qualities under human evaluation while achieving a 1.6x speedup. Our approach makes a significant step towards more efficient diffusion transformers, enhancing their potential for real-time applications.

20.
arXiv (CS.CL) 2026-06-12

Getting Better at Working With You: Compiling User Corrections into Runtime Enforcement for Coding Agents

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

21.
arXiv (CS.LG) 2026-06-17

Delta-Based Target Reformulation for Short-Term Electricity Load Forecasting Using LSTM and Transformer Models

作者:

arXiv:2606.17692v1 Announce Type: new Abstract: Accurate short-term electricity load forecasting is critical for the reliable and economic operation of modern power systems, under non-stationarity arising from weather variability, calendar effects, and evolving consumption patterns. While deep learning models such as LSTMs and Transformers show promising performance, most existing studies focus on direct absolute load prediction without explicitly addressing target non-stationarity. Motivated by classical time-series differencing techniques in ARIMA models, this paper investigates a delta-based target reformulation for short-term electricity load forecasting using deep learning. Instead of directly predicting absolute load values, the proposed formulation trains models to predict the change in load between consecutive time steps, with final forecasts reconstructed using the last observed load. This aims to stabilize the learning target and reduce forecasting difficulty. Using multi-year, hourly real-world electricity load data from India, augmented with meteorological variables from the NASA POWER project and calendar features, this study evaluates LSTM and Transformer models under both formulations, benchmarking them against LightGBM. Experiments are conducted for hour-ahead and day-ahead horizons, assessing performance via Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE). Results show that delta-based reformulation consistently improves forecasting accuracy for hour-ahead prediction across all evaluated models, yielding MAPE reductions of over 50% compared to absolute formulations. For day-ahead forecasting, delta targets specifically benefit deep sequence models (LSTM and Transformer), while LightGBM remains competitive under the absolute formulation. These findings indicate that while delta reformulation is a powerful inductive bias for neural networks, its efficacy is model- and horizon-dependent.

22.
arXiv (CS.LG) 2026-06-12

Towards One-for-All Anomaly Detection for Tabular Data

arXiv:2603.14407v2 Announce Type: replace Abstract: Tabular anomaly detection (TAD) aims to identify samples that deviate from the majority in tabular data and is critical in many real-world applications. However, existing methods follow a ``one model for one dataset (OFO)'' paradigm, which relies on dataset-specific training and thus incurs high computational cost and yields limited generalization to unseen domains. To address these limitations, we propose OFA-TAD, a generalist one-for-all (OFA) TAD framework that only requires one-time training on multiple source datasets and can generalize to unseen datasets from diverse domains on-the-fly. To realize one-for-all tabular anomaly detection, OFA-TAD extracts neighbor-distance patterns as transferable cues, and introduces multi-view neighbor-distance representations from multiple transformation-induced metric spaces to mitigate the transformation sensitivity of distance profiles. To adaptively combine multi-view distance evidence, a Mixture-of-Experts (MoE) scoring network is employed for view-specific anomaly scoring and entropy-regularized gated fusion, with a multi-strategy anomaly synthesis mechanism to support training under the one-class constraint. Extensive experiments on 34 datasets from 14 domains demonstrate that OFA-TAD achieves superior anomaly detection performance and strong cross-domain generalizability under the strict OFA setting. The source code is available at https://github.com/Shiy-Li/OFA-TAD.

23.
Nature Medicine 2026-06-10

Brain Health for Economic Resilience: a data-driven framework for the brain-positive economic transition

Announced in this Comment and in collaboration with Nature Medicine is the convening of the Brain Health for Economic Resilience Commission, a global, transdisciplinary effort to define, measure and operationalize brain health and cognitive capacity as foundational drivers of economic resilience.

24.
arXiv (CS.CV) 2026-06-16

MAND: Modality-Aware Novelty Detection for Open-World Egocentric Activity Recognition

Multimodal egocentric activity recognition integrates visual and inertial cues for robust first-person behavior understanding. However, deploying such systems in open-world environments requires detecting novel activities while continuously learning from non-stationary data streams. Existing methods rely on the main fused logits for novelty scoring, without fully exploiting the complementary evidence available from individual modalities. Because these logits are often dominated by RGB, cues from other modalities, particularly IMU, remain underutilized, and this imbalance worsens as catastrophic forgetting accumulates. To address this, we propose MAND, a modality-aware framework for multimodal egocentric open-world continual learning. At inference, Modality-aware Adaptive Scoring (MoAS) adaptively adjusts modality contributions using sample-wise reliability and refines novelty scoring with deviation and disagreement penalties. During training, Modality-aware Representation Stabilization Training (MoRST) preserves the discriminative capacity of each modality across tasks through modality-specific heads and modality-wise logit distillation. Experiments on a public multimodal egocentric benchmark show that MAND consistently improves novel activity detection and known-class accuracy while substantially reducing FPR95, indicating more reliable open-world recognition. The source code is available at \href{https://github.com/HyeJeongIm/MAND}{github.com/HyeJeongIm/MAND}.

25.
arXiv (CS.AI) 2026-06-19

ELVA: Exploring Ranking-Driven Universal Multimodal Retrieval

arXiv:2606.20280v1 Announce Type: cross Abstract: Leveraging Multimodal Large Language Models (MLLMs) via contrastive learning has become a mainstream paradigm for improving the performance of Universal Multimodal Retrieval (UMR). However, previous works have ignored the grain blindness when adapting the contrastive paradigm into retrieval tasks. Grain blindness refers to the tendency of the model to overlook grain-level information contained in the query, which is crucial for effectively handling complex queries. This stems from contrastive learning treating samples as a binary classification (positive/negative), while ignoring the different information carried by each negative sample. To address this, we argue that negatives should be treated differently according to their similarity to the positive sample, enabling the model to learn distinct grain information from each negative. In this paper, we introduce a simple but effective framework, called ELVA, a novel rule-based RL framework that mitigates grain blindness through ranking-driven MLLMs. 1) Instead of relying on reward models, we extend Reinforcement Learning with Verifiable Rewards (RLVR) to retrieval tasks, allowing the model to explore new ranking behaviors without explicit ranking labels. 2) By utilizing rule-based rewards, our approach jointly optimizes the ranking of negative samples while enlarging the similarity gap between positive and negative. To more precisely measure grain blindness, we further introduce MRBench, a new benchmark specifically designed for multi-grain query scenarios. ELVA achieves state-of-the-art results across standard retrieval benchmarks, and its notable 13.1% improvement on MRBench further demonstrates its effectiveness in alleviating grain blindness.