Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-16

SDS-LoRA: Overcoming Anisotropic Gradient Scaling in Low-Rank Adaptation

arXiv:2606.16454v1 Announce Type: cross Abstract: Low-Rank Adaptation (LoRA) enables efficient adaptation of large pre-trained models to downstream tasks by parameterizing weight updates with low-rank matrices. In this paper, we investigate the limitations of the LoRA parameterization from a geometric perspective. Specifically, we show that when a full fine-tuning gradient is backpropagated to the low-rank matrices, it undergoes anisotropic scaling driven by their singular values. We argue that this phenomenon is undesirable because it distorts the full fine-tuning gradient by skewing it toward dominant singular directions while suppressing others. Our analyses demonstrate that anisotropic gradient scaling reduces the effective rank of the low-rank matrices' gradients and results in suboptimal alignment between the full fine-tuning gradient and its low-rank approximation in LoRA, thereby exacerbating the gap to full fine-tuning. To address these limitations, we propose a new low-rank parameterization, SDS-LoRA, which structurally decouples singular values from the backward pass. Our method ensures that the full fine-tuning gradient backpropagates only through the orthonormal bases of the low-rank matrices' subspaces, independent of their scales. Convergence analysis demonstrates that while LoRA's convergence rate degrades with the condition number of the low-rank matrices, SDS-LoRA remains independent of it. Experimental results across natural language and vision benchmarks show that SDS-LoRA improves loss convergence and reduces the gap to full fine-tuning, significantly enhancing adaptation performance.

02.
arXiv (CS.LG) 2026-06-16

ShipNet: A Geometric Deep Learning Surrogate for Real-Time Ship Hydrodynamics

arXiv:2606.15356v1 Announce Type: cross Abstract: Accurate prediction of hydrodynamic performance is central to ship design, yet high-fidelity computational fluid dynamics remains prohibitively expensive for large-scale parametric exploration. This motivates the development of data-driven surrogate models that provide rapid approximations to hydrodynamic predictions at substantially reduced cost. We present ShipNet, a geometric deep-learning surrogate that predicts both hull-surface pressure distributions and far-field free-surface wave patterns directly from hull geometry and speed. The network employs a regularized dynamic graph convolutional backbone on hull point clouds, with a multi-head decoder for simultaneous near-body pressure and free-surface elevation outputs. Training data consist of 420 inviscid free-surface simulations generated using a potential-flow panel method for two parent yacht hulls, each parameterized into 70 variants and evaluated at three speeds. ShipNet predicts per-point pressure coefficient and two-dimensional wave elevation map using a composite loss that combines point-wise regression and image-structure terms. On a geometry-held-out test set, ShipNet achieves R^2=0.98 for hull pressure and R^2=0.91 for wave fields. Inference requires approximately 0.15s per case, yielding over a 550x speedup relative to the potential-flow solver on conventional hardware. Limitations include the restricted geometry and speed ranges and the inviscid training data, while future work will extend the model to high-fidelity viscous simulations with physics-informed regularization.

03.
arXiv (CS.LG) 2026-06-16

GradPower: Powering Gradients for Faster Language Model Pre-Training

arXiv:2505.24275v4 Announce Type: replace Abstract: We propose GradPower, a lightweight gradient-transformation technique for accelerating language model pre-training. Given a gradient vector $g=(g_i)_i$, GradPower first applies the elementwise sign-power transformation: $\varphi_p(g)=(sign(g_i)|g_i|^p)_{i}$ for a fixed $p>0$, and then feeds the transformed gradient into a base optimizer. Notably, GradPower requires only a single-line code change and no modifications to the base optimizer's internal logic, including the hyperparameters. When applied to Adam (termed AdamPower), GradPower consistently achieves lower terminal loss across diverse architectures (LLaMA, Qwen2MoE), parameter scales (66M to 2B), datasets (C4, OpenWebText), and learning-rate schedules (cosine, warmup-stable-decay). The most pronounced gains are observed when training modern mixture-of-experts models with warmup-stable-decay schedules. GradPower also integrates seamlessly with other state-of-the-art optimizers, such as Muon, yielding further improvements. Finally, we provide theoretical analyses that reveal the underlying mechanism of GradPower and highlight the influence of gradient noise.

04.
medRxiv (Medicine) 2026-06-18

Biomedical Capacity, Governance, and Health Security: A Dominican Republic Research Analysis of Stakeholder Perspectives

The COVID-19 pandemic exposed critical vulnerabilities in globally concentrated biomedical supply chains and accelerated interest in nearshoring and hemispheric health-security strategies. The Dominican Republic, already the third-largest medical device exporter in Latin America, occupies a strategically significant but institutionally constrained position within this realignment. This study evaluates stakeholder perceptions of the principal opportunities and barriers affecting biomedical ecosystem development in the Dominican Republic, with particular attention to governance, workforce capacity, and value-chain upgrading pathways. Methods. A concurrent mixed-methods design was employed, integrating a cross-sectional electronic survey of 142 purposively sampled domain experts (administered September-December 2025) with a qualitative executive consultation with senior government and industry leaders. Survey analyses combined descriptive statistics, one-sample t-tests against the scale neutral midpoint, chi-square goodness-of-fit tests, Friedman non-parametric ranking, Spearman rank correlations, and exploratory linear and logistic multivariable regression. Qualitative responses were analyzed using a framework approach grounded in the Triple Helix model of innovation systems. Results. Perceived government support was significantly below neutral (mean = 2.67, SD = 1.12; p = 0.034). Workforce shortages (83.3%) and weak academia-industry collaboration (71.4%) were the most frequently endorsed barriers ({chi}2(5) = 18.7, p = 0.002). Regulatory modernization (88.1%) and workforce development (85.7%) ranked as the highest-priority policy levers (Friedman p = 0.005). Clinical trials and contract research organization services were the dominant sub-sector priority (76.2%, binomial p < 0.001). In multivariable analysis, perceived government support, talent availability, and confidence in IP protection jointly explained 46% of the variance in sector competitiveness (R2 = 0.46, p < 0.001). Strong majority support existed for a formal public-private biomedical coordination authority (73.8%, p < 0.001).Conclusion. Institutional credibility and advanced human capital–rather than geography or market access–are the perceived binding constraints on the Dominican Republics biomedical trajectory. Regulatory modernization, targeted workforce investment, and the establishment of a national biomedical coordination authority represent the highest-leverage interventions for positioning the country as a hemispheric hub for biomedical manufacturing, clinical research, and health security.

05.
arXiv (CS.AI) 2026-06-15

Regulating the Machine Contributor: Governance and Policy Alignment in Open Source

arXiv:2606.14594v1 Announce Type: cross Abstract: AI-assisted software development has moved from line-level autocomplete to agents that can plan changes, edit files, and submit pull requests with limited human supervision. Open-source software, however, evolves through a process designed for humans: contributor agreements, codes of conduct, and review norms all assume a legally accountable person who can attest to provenance and answer reviewer questions. Autonomous and semi-autonomous AI contributors strain those assumptions, and the 2025-2026 record of agent-driven incidents, AI-generated nuisance volume, and platform-level shutdowns shows that the gap is operationally consequential. Several open-source organisations have responded with contribution policies, but the result is fragmented, and its alignment with emerging AI governance frameworks (EU AI Act, NIST AI RMF with the UC Berkeley Agentic AI Profile, ISO/IEC 42001 and 23894) is unmapped at the contribution level. We compare policies across six organisations (SymPy, LLVM, matplotlib, OpenInfra, the Apache Software Foundation, and the Linux Foundation) using Most-Similar Systems Design with indicator-based coding and process tracing for SymPy and LLVM. From this we derive a six-dimensional taxonomy (disclosure, responsibility, human oversight, licensing, enforcement, maintainer workload), an ordinal Policy Maturity Score, and a mapping of documented agent incidents onto the dimensions each policy fails to govern. Aligning the dimensions with the regulatory frameworks above identifies overlapping gaps neither side currently closes, and we close by sketching the shape of a harmonised tiered framework and the empirical evaluation needed to calibrate it.

06.
arXiv (CS.LG) 2026-06-19

AgentArmor: A Framework, Evaluation, \& Mitigation of Coding Agent Failures

arXiv:2606.19380v1 Announce Type: cross Abstract: Software engineering and deployment are increasingly being delegated to AI coding agents. The scale of their adoption is surfacing rare, but highly destructive, failure modes. In this paper, we study these failure modes as stemming from three distinct mechanisms: underspecification, where default model behavior is unsafe; capability errors, where the safe action is available but the model does not adhere to it due to bias or capability limitations; and agent harness errors, where the model fails to execute the safe action through the harness. We evaluate these across 8 different evaluations, each inspired by real-life deployment failures, totaling 20 coding environments and 59 synthetic transcript templates. Based on this evaluation, we propose AgentArmor, an agent harness modification, to mitigate these errors. By adding an extended system prompt, a separate command classifier, a ``3 strikes'' policy, deterministic guardrails, and tools for the agent to edit its own context, we show that AgentArmor is safer across a statistically significant number of samples. Thus, we suggest concrete mitigations for current coding agents and a design philosophy for future agent harness features.

07.
arXiv (CS.AI) 2026-06-18

The New Social Image: How AI Competency and AI Proactivity Influence Self- and Peer-Perceptions in the Workplace

arXiv:2606.00182v2 Announce Type: replace-cross Abstract: Human-AI collaboration is considered the most promising way to incorporate AI in the workplace. What remains unexplored are the experiential consequences of this teaming. More specifically, in a team with AI, how humans perceive themselves (self-perception) and how they are perceived by their coworkers (peer perception) in terms of work ownership and job meaningfulness. In a 2x2x2 vignette study (n=50), participants rated perceptions of ownership, affect, job meaningfulness and satisfaction, and role dynamics across two levels (low/high) of AI proactivity and AI competency as within-subject factors, with point-of-view (self perception/peer perception) as between-subjects. Our results showed that AI with low competency or low proactivity generally improved feelings related to ownership, meaningfulness, satisfaction, and role dynamics, and also increased positive affect while reducing negative affect. However, these effects were often influenced by point-of-view. For instance, low AI proactivity resulted in higher job satisfaction from self-perception rather than peer perception. Based on our findings, we argue that designing AI for the future of work solely around performance metrics may not be adequate. Highly competent and proactive AI-driven systems can have undesirable impacts on perceptions of ownership, job identity, social image and team dynamics, and consequently, job meaningfulness.

08.
bioRxiv (Bioinfo) 2026-06-15

VrySure: A Multi-Task AI Scientific Fraud Detection Platform for Identifying Manipulated and AI-Generated Biomedical Research Images

Integrity of scientific data is critical in biomedical research, where images often serve as primary evidence for experimental observations and conclusions. Advances in image-editing technologies and generative artificial intelligence (AI) have increased the accessibility and realism of visual manipulation, making detection through manual review increasingly challenging. To empower our laboratory researchers to continuously monitor and uphold scientific rigor and data integrity, and serve the global scientific community, we developed VrySure, an easy-to-deploy, AI-driven multi-task platform for automated image-integrity screening in biomedical research. VrySure integrates four detection modules: cross-image transformation detection, within-image copy-move detection, splicing detection in blot and gel images, and AI-generated image detection. The system identifies potentially manipulated images and, when possible, localizes suspicious regions using bounding-box outputs to support downstream verification. To support development and evaluation, we constructed task-specific datasets by combining public biomedical image resources, curated manipulated examples, and synthetic images generated by multiple generative AI systems. We evaluated VrySure using region-level F1 score, recall, precision, false negative rate (FNR), and false discovery rate (FDR) across multiple manipulation categories and compared its performance with two commonly used commercial image-integrity screening platforms under a predefined benchmark protocol. Under the tested conditions, VrySure achieved a higher F1 score and recall, lower FNR, and maintained a low FDR for within-image copy-move detection, splicing detection, and AI-generated image detection, while showing comparable performance in transformation detection. Beyond automated screening, VrySure is designed to support source-data comparison and evidence-based assessment in scientific integrity investigations. By integrating multiple detection capabilities into a unified and scalable workflow, VrySure provides a practical framework to improve the efficiency and consistency of image-integrity screening in biomedical research.

09.
arXiv (CS.AI) 2026-06-11

Risk Under Pressure: Compute-Aware Evaluation of Adversarial Robustness in Language Models

arXiv:2606.11409v1 Announce Type: cross Abstract: Adversarial robustness evaluations of large language models (LLMs) typically report attack success rate (ASR) under fixed query budgets, implicitly treating all attacks as equally costly. In practice, the computational expense of different attack strategies can vary by orders of magnitude. Consequently, ASR at a fixed budget can obscure the true effort required to jailbreak a model, thereby making it hard to determine whether an attack's cost justifies its payoff to the attacker. We propose a compute-aware evaluation framework based on computational pressure, measured in cumulative floating-point operations (FLOPs), as a proxy for adversarial effort. We introduce risk-compute curves, which map compute budgets to attack risk, and derive two metrics that summarize the average pressure required for a given attack to succeed. Across ten models spanning three families and four different stages in language model training and alignment, evaluated with three attack strategies (gradient-based, iterative refinement, and template-based) on two jailbreak robustness benchmarks, we find: (1) alignment training has non-monotonic effects on compute-space robustness; (2) scaling model size reduces gradient-based attack effectiveness but has limited impact on cheaper template-based attacks; (3) gradient-based attacks optimized on a surrogate model can transfer to a separate target model, providing a way to reduce attacker costs; (4) compute cost varies by up to ${\approx}5{\times}$ across harm categories within a single model; and (5) safety-aligned RL increases aggregate cost while leaving some categories disproportionately accessible. We release our framework to enable compute-aware risk assessment and evaluation.

10.
medRxiv (Medicine) 2026-06-17

Investigating shared genetic overlap of immune-mediated inflammatory diseases and cardiometabolic diseases

Abstract Background: Immune-mediated inflammatory diseases (IMIDs) are associated with increased risk of cardiometabolic diseases. Investigating genetic overlap among these conditions can provide insights into their clinical management. Methods: Genetic correlation was assessed using linkage disequilibrium score regression (LDSC). Then, a meta-analysis was conducted using Association Analysis Based on SubSETs (ASSET) to pinpoint independent single nucleotide polymorphisms (SNPs) shared across the diseases. Each independent SNP was then used to define a genomic window (+/-500KB) for colocalisation analysis and Local Analysis of [co]Variant Association (LAVA) to offer multiple layers of regional pleiotropic evidence. Over-representation analysis was then run to identify enriched biological pathways, which then were used for drug target analysis. Results: The LDSC analysis showed a significant global genetic correlation for rheumatoid arthritis (RA) and cardiometabolic diseases including hypertension, coronary artery disease (CAD), heart failure (HF), stroke, atrial fibrillation (AF), and type two diabetes mellitus (T2DM) ranging from rg = 0.09 to 0.24. ASSET meta-analysis identified 164 independent SNPs shared across RA and the cardiometabolic diseases with P < 5 x 10- in the overall one-sided meta-analysis P-value, FDR < 0.05 in both individual GWASs, and TRUE phenotype matrix. Colocalisation analysis revealed multiple loci with strong evidence (Posterior probabilities [&ge;] 80) of single causal SNPs between the trait pairs. LAVA analysis was then used as an additional layer of confirmation for the findings generated by ASSET and colocalisation and thus several loci were highlighted. Over-representation analysis showed significant enriched immune-related pathways across RA-hypertension, RA-CAD, RA-AF, and RA-T2DM trait pairs. Drug target analysis highlighted several drugs which could be further tested for their effectiveness in RA and its common comorbidities. Conclusion: The findings revealed a shared genetic architecture and key immune-related biological pathways underlying RA and its associated cardiometabolic comorbidities. The identified genes and drugs provide opportunities for further therapeutic assessment which could improve clinical management strategies.

11.
arXiv (math.PR) 2026-06-19

Asymptotic properties for fully coupled delayed forward-backward stochastic differential equations

arXiv:2606.19925v1 Announce Type: new Abstract: We investigate the asymptotic behavior of solutions to a class of fully coupled forward-backward stochastic differential equations with time-delayed generators. Such systems arise naturally in stochastic models with memory effects and constitute a significant extension of the classical fully coupled FBSDE framework. The presence of delay introduces additional analytical difficulties due to the dependence of the coefficients on the past trajectories of the solution processes and the resulting non-Markovian structure. Under suitable assumptions on the coefficients, we study the asymptotic properties of a perturbed delayed FBSDE driven by a small noise parameter. We first establish the convergence in distribution of the associated solution processes as the perturbation parameter tends to zero. We then prove almost sure convergence towards the solution of the corresponding deterministic limiting system. As a consequence of these asymptotic results, we derive a large deviation principle for the solution processes. Our results extend the asymptotic analysis of Cruzeiro, Gomes and Zhang (2014) from the classical fully coupled FBSDE setting to the delayed framework, and complement existing works on weakly coupled delayed forward-backward systems. They provide, to the best of our knowledge, the first large deviation principle for fully coupled forward-backward stochastic differential equations with delayed generators.

12.
arXiv (CS.LG) 2026-06-15

Lyapunov-Based Sample Complexity Analysis for Weakly-Coupled MDPs

arXiv:2606.14095v1 Announce Type: new Abstract: We study the sample complexity of learning in average-reward weakly-coupled Markov decision processes (WCMDPs) and Restless Bandits (RBs) under a generative model. Naive reduction to a tabular MDP leads to high complexity bounds as the state-action space is exponentially large in the number of arms $N$. By exploiting the weakly coupled structure, we show that near-optimal policies can be learned with sample and computational complexities that are polynomial in $N$. Specifically, we analyze the plug-in approach, which applies an efficient planning algorithm to an empirical model estimated from data. For fully heterogeneous WCMDPs, we establish the first finite-sample PAC guarantee with polynomial complexity and an $O(1/\sqrt{N})$ optimality gap. For homogeneous RBs, we further prove that a smaller optimality gap is achievable under mild structural assumptions. A primary technical contribution of our work is a novel Lyapunov-based analysis framework. Unlike classical approaches that rely on the difficult-to-control bias function, our framework uses an explicitly constructed Lyapunov function along with a drift transfer technique between the true and empirical models. A key step of independent interest in our framework is a fine-grained perturbation analysis for the underlying linear programming (LP) relaxation, which provides a general tool for analyzing LP-based policies and weakly-coupled systems.

13.
arXiv (CS.AI) 2026-06-11

Human-Guided Agentic AI for Multimodal Clinical Prediction: Lessons from the AgentDS Healthcare Benchmark

arXiv:2602.19502v2 Announce Type: replace Abstract: Agentic AI systems are increasingly capable of autonomous data science workflows, yet clinical prediction tasks demand domain expertise that purely automated approaches struggle to provide. We investigate how human guidance of agentic AI can improve multimodal clinical prediction, presenting our approach to all three AgentDS Healthcare benchmark challenges: 30-day hospital readmission prediction (Macro-F1 = 0.8986), emergency department cost forecasting (MAE = $465.13), and discharge readiness assessment (Macro-F1 = 0.7939). Across these tasks, human analysts directed the agentic workflow at key decision points, multimodal feature engineering from clinical notes, scanned PDF billing receipts, and time-series vital signs; task-appropriate model selection; and clinically informed validation strategies. Our approach ranked 5th overall in the healthcare domain, with a 3rd-place finish on the discharge readiness task. Ablation studies reveal that human-guided decisions compounded to a cumulative gain of +0.065 F1 over automated baselines, with multimodal feature extraction contributing the largest single improvement (+0.041 F1). We distill three generalizable lessons: (1) domain-informed feature engineering at each pipeline stage yields compounding gains that outperform extensive automated search; (2) multimodal data integration requires task-specific human judgment that no single extraction strategy generalizes across clinical text, PDFs, and time-series; and (3) deliberate ensemble diversity with clinically motivated model configurations outperforms random hyperparameter search. These findings offer practical guidance for teams deploying agentic AI in healthcare settings where interpretability, reproducibility, and clinical validity are essential.

14.
arXiv (quant-ph) 2026-06-19

Accelerated Rydberg electromagnetically induced transparency quantum memory via shortcuts to adiabaticity

arXiv:2603.18399v2 Announce Type: replace Abstract: Electromagnetically induced transparency (EIT) enables coherent light-matter storage, forming the basis of photonic quantum memories that are essential for scalable quantum networks and distributed quantum computing. However, accelerating the storage process violates the adiabatic condition, resulting in the excitation of the lossy intermediate state and a reduction in writing efficiency. We propose and numerically investigate a high-speed, high-fidelity quantum storage scheme by incorporating a shortcut-to-adiabaticity (STA) technique based on counter-diabatic (CD) driving. By introducing a precisely engineered auxiliary field into a conventional EIT system, our protocol significantly shortens the writing time beyond the conventional adiabatic limit while effectively suppressing the transient population of the lossy intermediate state. Furthermore, our scheme demonstrates strong flexibility in pulse design, remaining effective across different temporal profiles of both the control and signal fields. It also exhibits robustness against imperfections in the CD drive. Even with imperfect single-photon writing and non-ideal Rydberg blockade, the scheme retains clear advantages, maintaining high storage performance and overcoming the intrinsic speed-fidelity trade-off of traditional EIT protocols. These features pave the way for fast and robust quantum devices suitable for high-throughput quantum repeaters and advanced quantum information processing.

15.
arXiv (quant-ph) 2026-06-11

Collective Emission in LH2 Assembly Beyond the Point-Dipole Approximation

arXiv:2606.11227v1 Announce Type: cross Abstract: Collective emission in light-harvesting assemblies is governed by the local transition dipole and finite geometry of emitting units, a fact that point-dipole approximation obscures. To go beyond this picture, we develop a non-Hermitian Hamiltonian using the quantum electrodynamic dyadic Green's tensor for a purple bacteria. We construct it for the isolated 24-bacteriochlorophyll conical frustum and its P42$_1$2 crystallographic assembly. The P42$_1$2 unit-cell symmetry is found to invert the bright-dark ordering of the single ring, placing subradiant states at the low-energy end and revealing the entire crystal to be the energy-harvesting entity. Tilt-driven switching is activated only in crystal geometries where the finite dipole-carrier (LH2) lies perpendicular to the growth plane. Vacancy and orientational disorder work only in cooperation to renormalize the switching threshold from higher polar angles to lower values.

16.
arXiv (CS.CV) 2026-06-15

Pano3D: Unified 3D Reconstruction and Panoptic Segmentation

Recent advances in 3D feedforward reconstruction neural networks have achieved remarkable success in dense reconstruction from images without any camera parameters. Yet, equipping these models with robust semantic understanding remains an open problem. Here we introduce an approach that performs 3D reconstruction and 3D panoptic segmentation in a unified framework. We build on existing 3D reconstruction models and augment them with a set-based mask decoder. The approach is jointly trained with a geometric and semantic loss, which are shown to be mutually beneficial. More precisely, the features are initialized from the geometric information and then finetuned to capture jointly geometry and semantics. We demonstrate the generality of our approach by successfully applying our framework both to online and all-to-all attention reconstruction backbones. Our method achieves state-of-the-art performance in 3D panoptic segmentation across ScanNet, ScanNet200, and ScanNet++ datasets. Ablation studies show that such joint training of a unified model equips 3D feedforward reconstruction neural networks with panoptic segmentation and yields mutually beneficial improvements.

17.
bioRxiv (Bioinfo) 2026-06-19

Nickel-Driven Dynamics of Urease in Sporosarcina pasteurii: Integrated Computational and Experimental Insights

Urease is a nickel-dependent enzyme that plays an important role in urea hydrolysis and in a process named as microbial-induced calcium carbonate precipitation (MICP), which is widely used in sustainable environmental biotechnology. Despite its ecological importance, urease powers Biogrout (biocementation), a promising green technology for soil stabilization and infrastructure repair. Yet, the relationship between nickel availability, enzyme activation, and bacterial fitness remains poorly understood. In this study, we reveal a striking dual effect of nickel on Sporosarcina pasteurii: while high Ni2+ concentrations strongly inhibit growth (IC50 {approx} 637.7 {micro}M), they simultaneously boost specific urease activity up to six-fold. This uncoupling between biomass and enzymatic efficiency highlights a previously overlooked adaptive strategy under metal stress. Using structural bioinformatics and molecular docking, we show that Ure1–the catalytic subunit–exhibits the strongest nickel affinity (-4.3 kcal{middle dot}mol-1), supported by highly conserved active-site residues, whereas accessory proteins UreE and UreG display moderate and weak binding, consistent with their roles in metal delivery and GTP-dependent maturation. In addition, microscopic observations confirmed that calcium carbonate precipitation was most pronounced at intermediate nickel concentrations (approximately 400-1000 {micro}M), whereas higher concentrations ([&ge;]1000-1300 {micro}M) led to reduced mineral formation due to loss viable cells. Taken together, these results indicates that nickel availability controls both urease activation and bacterial fitness, and that an optimal balance is required to maximize biomenerilization efficiency in environmental applications, particularly in biocementation technology.

18.
arXiv (CS.LG) 2026-06-12

Boltzmann Attention: Learnable Ising Couplings for Cooperative Attention

arXiv:2606.12478v1 Announce Type: new Abstract: Attention mechanisms are central to modern sequence models, yet standard attention computes relevance primarily through individual query–key similarities. Although softmax normalization introduces competition among positions, a standard attention layer does not explicitly parameterize learnable interactions between attention decisions. This limits its ability to directly model cooperative or antagonistic co-attention structure within the attention mechanism itself. We propose Boltzmann attention, an energy-based generalization in which attention patterns are governed by an interacting Ising model. The method augments the usual data-dependent local fields with learnable pairwise couplings, allowing the model to represent inter-position correlations beyond those captured by softmax or sigmoid attention. Experiments on character-level language modeling and synthetic bracket matching show that Boltzmann attention consistently improves over standard softmax attention within a standard Transformer architecture, with the advantage becoming more pronounced as sequence length increases. A four-way ablation confirms that the improvement arises from the learnable pairwise couplings. These results suggest that explicit inter-position interactions provide a principled enhancement for attention-based sequence modeling. Moreover, the Ising formulation opens a natural path toward quantum-computing-based sampling strategies: we demonstrate that diabatic quantum annealing provides a practical training method while maintaining competitive performance with exact Boltzmann computation.

19.
arXiv (CS.CV) 2026-06-18

Learning to Distort: Weakly-Supervised Image Quality Transfer for Prostate DWI Correction

Single-shot echo-planar prostate diffusion-weighted imaging (DWI) is frequently complicated by geometric distortions, which impact the ability to derive reliable diagnoses from such images. Developing automated correction methods is challenged by the absence of paired distorted and undistorted clinical scans. In this paper, we first propose a novel weakly-supervised image quality transfer (IQT) framework from undistorted to distorted images that utilizes image quality assessment (IQA) signals to supervise the transfer process. Unlike traditional methods that require expensive, voxel-wise paired data or resort to developing unpaired algorithms, our approach utilizes image-level quality labels (here, distorted vs. undistorted) to establish latent quality prototypes within a pre-trained feature space. Recognizing that simulating realistic distortions is more reliable than direct unpaired correction, we describe a weakly-supervised prototype flow matching algorithm to explicitly regularize generative trajectories towards distorted prototypes, producing realistic susceptibility artifacts that mimic clinical degradations. By synthesizing these realistic pairs, we enable a second IQT model to be trained in the forward direction for distortion correction. Experimental results demonstrate that our generated images successfully mimic the diagnostic interference of real-world artifacts, which leads to more capable distortion correction IQT models. In addition to qualitative comparisons, we also conduct exhaustive quantitative evaluations that compare our approach with existing unpaired approaches (e.g., CycleGAN, UNIT-DDPM, and OT-FM) - as either forward or reverse alternatives - by assessing clinical downstream task performance in PI-RADS and Gleason score classification, using both in-distribution and external data sets.

20.
PLOS Computational Biology 2026-06-22

Beyond the canonical: The role of post-transcriptional regulation in drug-target interaction prediction

by Md Istiaq Ansari, Khandakar Tanvir Ahmed, Debby D. Wang, Kirill Medvedev, Wei Zhang Protein isoforms produced from the same gene through post-transcriptional regulatory mechanisms, such as alternative splicing, can substantially alter protein structure and function, including drug-binding properties. However, most existing drug-target interaction (DTI) and drug-target affinity (DTA) prediction models rely exclusively on a single representative protein sequence per gene, typically the canonical or longest isoform, thereby overlooking the functional diversity introduced by alternative isoforms. This assumption can introduce bias, limit generalizability, and compromise the biological validity of model predictions. In this study, we systematically investigate the impact of protein isoform variation on DTI prediction accuracy. Our results show that substituting the canonical sequence with an alternative isoform often leads to substantial declines in predictive performance. Structural and binding affinity analyses further reveal that these discrepancies are frequently associated with changes in predicted binding-site configurations, which we further examine through controlled perturbations of binding-site residues. These experiments suggest that even subtle alterations in binding regions can lead to inconsistent DTI predictions. Overall, our findings uncover a critical limitation in current DTI modeling frameworks and underscore the importance of incorporating isoform-specific information to better reflect biological reality and improve therapeutic relevance. The codes and datasets are available at https://github.com/compbiolabucf/DTIVariant.

21.
arXiv (quant-ph) 2026-06-16

Lattice surgery for near-term experimental logical qubit entanglement creation in planar architectures

arXiv:2606.15190v1 Announce Type: new Abstract: In the era of early fault-tolerant quantum computing, basic demonstrations of entanglement operations between a few logical qubits are at the frontier of recent developments in quantum computing. In this work, we describe in detail, at both the logical and physical qubit levels, a logical teleportation protocol between two surface code logical qubits based on lattice surgery. We address several aspects of the teleportation protocol pertinent to superconducting qubit architectures. We explore the modularity constraints in the number and location of stabilizer readouts and compare variants of the teleportation protocol in this regard. Additionally, we investigate potential performance improvements related to in-sequence decision logic and the optimal size of the interface region between two surface code patches on a superconducting chip. Based on our simulations, we show possible near-term improvements in lattice surgery protocols that facilitate fault-tolerant quantum computing in superconducting circuit architectures.

22.
bioRxiv (Bioinfo) 2026-06-11

GeroEngine: Generative single-cell aging trajectories reveal a bidirectionally traversable identity core and direction-specific inflammatory remodeling

作者:

Single-cell RNA sequencing (scRNA-seq) maps aging tissues at high resolution but is destructive, preventing longitudinal tracking; dropout and zero-inflation artifacts, amplified by shift-invariant linear simulations, confound age-associated variability. We developed GeroEngine, a technical-artifact-aware framework combining VAE-based trajectory simulation, LOPO cross-validation, linear baselines, reverse traversal, and reverse-directed network inference. In microglia and HSCs, the VAE reduced technical-artifact carryover while preserving trajectory heterogeneity and improving alignment to artifact-reduced reference manifolds. Consensus GeroTargets and GeroRegulators defined tissue-specific GeroNetworks organized into three pillars: lineage/replication identity collapse, a sex-dimorphic endocrine/stress core, and inflammatory remodeling. Forward and reverse simulations aligned to the common young[-&gt;]old aging axis revealed a sign-coherent, direction-specific program: identity/replication targets were bidirectionally recovered, whereas MHC/NF-{kappa}B inflammatory programs were preferentially forward-recovered. These results support identity collapse as a deep traversable core of aging and nominate upstream homeostatic restoration over downstream inflammatory suppression.

23.
arXiv (CS.CV) 2026-06-11

MultiToP: Learning to Patch Visual Tokens to Mitigate Hallucinations in Video Large Multimodal Models

Video Large Multimodal Models have achieved remarkable progress in video understanding, yet they remain prone to hallucinations, where generated responses are not faithfully supported by the input video. In this paper, we propose MultiToP, a multimodal-context-aware visual token patching framework that mitigates hallucinations by refining unreliable visual tokens before language generation. MultiToP introduces a lightweight Visual Token Patcher to predict token-level replacement distributions and selectively substitute unreliable visual tokens with a dynamic global patch token. To train the patcher effectively, we further propose information-guided rank calibration, which uses answer-conditioned frame-level information cues derived from the backbone to guide token replacement. Combined with ground-truth answer supervision and sparsity regularization, MultiToP enables localized visual evidence refinement without modifying the original model. Extensive experiments demonstrate that MultiToP effectively reduces hallucinations on Vript-HAL with negligible inference overhead, improving the F1 scores of Qwen3-VL-4B-Instruct by 50.60% over the vanilla model. Meanwhile, MultiToP preserves general video understanding ability, yielding an 18.58% relative accuracy gain on ActivityNet-QA for Video-LLaVA-7B.

24.
arXiv (CS.CV) 2026-06-12

Skeleton Sparsification and Densification Scale-Spaces

The Hamilton-Jacobi skeleton, also known as the medial axis, is a powerful shape descriptor that represents binary objects in terms of the centres of maximal inscribed discs. Despite its broad applicability, the medial axis suffers from sensitivity to noise: Minor boundary variations can lead to disproportionately large and undesirable expansions of the skeleton. Classical pruning methods mitigate this shortcoming by systematically removing extraneous skeletal branches. This sequential simplification of skeletons resembles the principle of sparsification scale-spaces that embed images into a family of reconstructions from increasingly sparse pixel representations. We combine both worlds by introducing skeletonisation scale-spaces: They leverage sparsification of the medial axis to achieve hierarchical simplification of shapes. Unlike conventional pruning, our framework inherently satisfies key scale-space properties such as hierarchical architecture, controllable simplification, and equivariance to geometric transformations. We provide a rigorous theoretical foundation in both continuous and discrete formulations and extend the concept further with densification. By growing the skeleton successively instead of shrinking it, we allow inverse progression from coarse to fine scales. Densification scale-spaces can even reach beyond the original skeleton to produce overcomplete shape representations with relevancy for practical applications. Through proof-of-concept experiments, we demonstrate the effectiveness of our framework for practical tasks including robust skeletonisation, shape compression, and stiffness enhancement for additive manufacturing.

25.
arXiv (CS.CV) 2026-06-16

A Survey on 3D Gaussian Splatting Applications: Segmentation, Editing, and Generation

In the context of novel view synthesis, 3D Gaussian Splatting (3DGS) has recently emerged as an efficient and competitive counterpart to Neural Radiance Field (NeRF), enabling high-fidelity photorealistic rendering in real time. Beyond novel view synthesis, the explicit and compact nature of 3DGS enables a wide range of downstream applications that require geometric and semantic understanding. This survey provides a comprehensive overview of recent progress in 3DGS applications. It first reviews the reconstruction preliminaries of 3DGS, followed by the problem formulation, 2D foundation models, and related NeRF-based research areas that inform downstream 3DGS applications. We then categorize 3DGS applications into three foundational tasks: segmentation, editing, and generation, alongside additional functional applications built upon or tightly coupled with these foundational capabilities. For each, we summarize representative methods, supervision strategies, and learning paradigms, highlighting shared design principles and emerging trends. Commonly used datasets and evaluation protocols are also summarized, along with comparative analyses of recent methods across public benchmarks. To support ongoing research and development, a continually updated repository of papers, code, and resources is maintained at https://github.com/heshuting555/Awesome-3DGS-Applications.