Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-15

Q-Net: Queue Length Estimation via Kalman-based Neural Networks

arXiv:2509.24725v4 Announce Type: replace-cross Abstract: Estimating queue lengths at signalized intersections is a long-standing challenge in traffic management. Partial observability of vehicle flows complicates this task despite the availability of two privacy-preserving data sources: (i) aggregated vehicle counts from loop detectors near stop lines, and (ii) aggregated floating car data (aFCD) that provide segment-wise average speed measurements. However, how to integrate these sources with differing spatial and temporal resolutions for queue length estimation is rather unclear. Addressing this question, we present Q-Net: a queue estimation framework built upon a state-space formulation. This design addresses key challenges in queue modeling, such as violations of traffic conservation assumptions. Q-Net follows the Kalman predict-update structure and maintains physical interpretability in both the state evolution and measurement models. Q-Net uses an AI-augmented Kalman filter to learn time-varying gain dynamics from data. The framework supports real-time implementation and improves spatial transferability by grouping aFCD measurements into fixed-size local groups, making the number of learnable parameters independent of section length. Evaluations on urban main roads in Rotterdam, the Netherlands, show that Q-Net outperforms baseline methods, tracks queue formation and dissipation accurately, and mitigates aFCD-induced delays. By combining data efficiency, interpretability, real-time applicability, and spatial transferability, Q-Net makes accurate queue length estimation possible without costly sensing infrastructure like cameras or radar.

02.
arXiv (CS.AI) 2026-06-19

PrototypeNAS: Rapid Design of Deep Neural Networks for Microcontroller Units

arXiv:2603.15106v2 Announce Type: replace Abstract: Enabling efficient deep neural network (DNN) inference on edge devices with different hardware constraints is a challenging task that typically requires DNN architectures to be specialized for each device separately. To avoid the huge manual effort, one can use neural architecture search (NAS). However, many existing NAS methods are resource-intensive and time-consuming because they require the training of many different DNNs from scratch. Furthermore, they do not take the resource constraints of the target system into account. To address these shortcomings, we propose PrototypeNAS, a zero-shot NAS method to accelerate and automate the selection, compression, and specialization of DNNs to different target microcontroller units (MCUs). We propose a novel three-step search method that decouples DNN design and specialization from DNN training for a given target platform. First, we present a novel search space that not only cuts out smaller DNNs from a single large architecture, but instead combines the structural optimization of multiple architecture types, as well as optimization of their pruning and quantization configurations. Second, we explore the use of an ensemble of zero-shot proxies during optimization instead of a single one. Third, we propose the use of Hypervolume subset selection to distill DNN architectures from the Pareto front of the multi-objective optimization that represent the most meaningful tradeoffs between accuracy and FLOPs. We evaluate the effectiveness of PrototypeNAS on 12 different datasets in three different tasks: image classification, time series classification, and object detection. Our results demonstrate that PrototypeNAS is able to identify DNN models within minutes that are small enough to be deployed on off-the-shelf MCUs and still achieve accuracies comparable to the performance of large DNN models.

03.
arXiv (CS.AI) 2026-06-11

Federated continual learning: A comprehensive survey on lifelong and privacy-preserving learning over distributed and non-stationary data

arXiv:2606.11272v1 Announce Type: cross Abstract: Federated Learning (FL) enables collaborative and privacy-preserving model training across distributed clients, but most existing FL systems implicitly assume data stationarity. In real-world settings-such as healthcare, industrial IoT (IIOT), cybersecurity, and smart cities-data streams are inherently non-stationary, leading classical FL methods to suffer from performance degradation, instability, and catastrophic forgetting. Continual Learning (CL) addresses learning under evolving data distributions but has been largely studied in centralized settings, overlooking key constraints of federated systems, including privacy, limited communication, and client heterogeneity. Federated Continual Learning (FCL) emerges at the intersection of FL and CL, aiming to support lifelong, adaptive, and privacy-aware learning over distributed and non-stationary data. This survey provides a comprehensive and systematic overview of FCL. We first present a formal definition of the FCL problem and clarify its distinctive characteristics. We then analyze the limitations of classical FL under non-stationary conditions, highlighting how CL principles support long-term adaptation. To organize the rapidly growing literature, we propose a multi-dimensional taxonomy of FCL approaches. Furthermore, we review representative application domains and data modalities, summarize commonly used evaluation metrics, and discuss experimental perspectives for assessing long-term performance and forgetting. Finally, we highlight key open challenges, including handling extreme heterogeneity under temporal drift, designing scalable and privacy-preserving memory mechanisms, and establishing standardized benchmarks. This survey aims to serve as a reference and a roadmap for advancing FCL toward robust and deployable real-world systems.

04.
PLOS Computational Biology 2026-06-08

Assessing the inference of single-cell phylogenies and population dynamics from CRISPR lineage recordings

by Julia Pilarski, Tanja Stadler, Sophie Seidel Multicellular organisms develop from a single cell by repeated rounds of cell division, differentiation, and death, which can be represented as a single-cell phylogenetic tree. Genetic lineage tracing allows us to investigate this development by tracking the ancestry of individual cells as populations grow and change over time. However, accurate reconstruction of the cell phylogeny and quantification of the corresponding phylodynamic parameters – cell division, differentiation, and death rates – from this tracking data remains challenging and needs to be systematically evaluated. We perform simulations and assess, using the Bayesian framework, the joint inference of time-scaled cell phylogenies and phylodynamic parameters from CRISPR lineage recordings with random or sequential edits. Principally, we characterize the inference improvements as the recorder capacity increases. We observe more accurate phylogenetic reconstruction from sequential compared to random recordings, but no substantial improvement in phylodynamic inference when using the additional information contained in the order of edits. Overall, we find that CRISPR lineage recordings carry a strong signal on the rates of cell division when appropriate models are used. However, we detect biases in the inferred rates of cell division and death under phylodynamic model misspecification, i.e., when fitting classic memoryless birth-death processes to synchronous cell divisions. Moreover, for scenarios when cells differentiate into distinct types, we demonstrate that Bayesian phylodynamic analysis of sparse end-point measurements can resolve these cell differentiation trajectories by lineage and time. Under prototypical dynamics, we recover cell type-specific division and death rates, and cell type transition rates in over 80% of simulations. Overall, this simulation study explores how much information on cellular development can be extracted from state-of-the-art genetic lineage tracing data using phylogenetic and phylodynamic methodology.

05.
arXiv (CS.CL) 2026-06-16

SING: Synthetic Intention Graph for Scalable Active Tool Discovery in LLM Agents

Large language model (LLM) agents increasingly rely on agent harnesses that manage context, tools, and multi-turn execution, making tools a central interface for acting in realistic digital environments. As harness-connected tool ecosystems expand to hundreds or thousands of APIs, services, and task-specific skills, exhaustive tool schema injection becomes costly and imposes a closed-world assumption that limits agents to a predefined static inventory. Retrieval-augmented tool selection offers a natural alternative, but existing one-shot retrieval methods often fail to align isolated tool descriptions with the agent's true task intention, especially in long-horizon tasks where required capabilities emerge through decomposition, observations, and newly induced subgoals. We propose SING, an intention-aware active tool discovery framework that builds an intention-tool graph linking user intentions, tool capabilities, and tool collaboration patterns, and dynamically retrieves tools according to evolving task states. Using a unified corpus of 7,471 tools, we evaluate SING on three real-world tool-use benchmarks. SING improves Global Recall@5 by up to 59.8% and downstream success rate by up to 28.9% over baselines, while reducing full-corpus tool-schema exposure by 99.8%, demonstrating that intention-aware graph structure enables more accurate and context-efficient tool discovery in large-scale agentic ecosystems.

06.
arXiv (CS.LG) 2026-06-16

Data-driven Control with Real-time Uncertainty Compensation for Multi-Fuel Engines

arXiv:2606.16171v1 Announce Type: cross Abstract: Multi-fuel compression ignition (CI) engines offer superior power density and fuel flexibility. However, achieving consistent and optimal combustion phasing across a wide range of operating conditions remains a major challenge, particularly in the presence of modeling uncertainties. This paper presents a novel, data-driven real-time uncertainty compensation framework for combustion control in multi-fuel CI engines. The proposed approach introduces a pseudo-engine speed that enables dynamic adaptation of control inputs in response to uncertainty affecting the engine. To model the underlying combustion process, a Gaussian Process Regression (GPR) model is first trained on available input-output data, capturing the nonlinear and fuel-dependent behavior across varying operating conditions. Control inputs are then synthesized through model inversion of the learned GPR surrogate and augmented with an uncertainty compensator designed to mitigate deviations caused by dynamic variations in operating conditions and model inaccuracies. This integrated control strategy allows for real-time input corrections within a finite number of combustion cycles. Theoretical analysis establishes finite-time convergence guarantees for the proposed controller. Simulation results demonstrate that the proposed method steers the combustion phasing to the desired value in real-time, providing a scalable and adaptive control solution for multi-fuel CI engine operation.

07.
arXiv (CS.LG) 2026-06-16

ExpRL: Exploratory RL for LLM Mid-Training

arXiv:2606.17024v1 Announce Type: new Abstract: Sparse reward reinforcement learning (RL) has become a standard tool for improving LLM reasoning, but its success depends critically on the coverage present in the base model. In practice, models are often primed for RL through mid-training on curated reasoning traces that teach useful primitive skills such as decomposition, verification, or self-correction. Although effective, this strategy requires manually specifying what the model should learn, and it remains unclear whether such primitive coverage is enough for much harder problems, which require combining these skills into broader solution strategies. We study a more automated approach: RL-based mid-training using large corpora of human-written question-answer data. Rather than treating reference solutions as targets to imitate, our method, ExpRL, uses them as reward scaffolds: references are hidden from the policy and used only to construct problem-specific grading rubrics for judging on-policy reasoning traces. The policy samples from the original problem prompt, while an LLM judge compares the sampled reasoning trace against the reference solution and assigns outcome-level or process-level dense rewards. This lets ExpRL reinforce partial progress, useful intermediate reductions, and productive reasoning behaviors that sparse final-answer rewards often fail to upweight. On challenging math reasoning tasks, ExpRL yields stronger RL priming than SFT, sparse-reward GRPO, and self-distillation, and provides a better initialization for subsequent sparse-reward RL. Additional mixed-domain experiments further suggest that ExpRL can extend beyond the original math-only setting.

08.
PLOS Medicine 2026-05-29

Characterization of the VHH-Fc construct rimteravimab in healthy adults and patients hospitalized for mild-to-moderate COVID-19: Two Phase 1 randomized clinical trials

作者:

by Ellen Jansen, Viki Bockstal, Florence Herschke, Per Olsson Gisleskog, Manuela Rinaldi, Angélique Boerboom, Salah Hadi, Natalia Gaibu, Michel Moutschen, Dominique Tersago Background Variable Heavy domain of Heavy chains (VHH) are innovative tools to target unique epitopes, yet few have been developed as heavy chain-only antibodies for clinical use. Rimteravimab (referred to here as XVR011) is a humanized antibody developed for the treatment of mild-to-moderate coronavirus disease 2019 (COVID-19), consisting of two identical VHHs targeting the receptor binding domain (RBD) of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike, with a human immunoglobulin (Ig) G1 fragment constant of antibody (Fc), silenced for Fc effector functions. We conducted two Phase 1 studies in healthy volunteers or hospitalized COVID-19 patients to evaluate its safety, tolerability, pharmacokinetics and immunogenicity. Methods and findings A randomized, double-blinded, single-center, placebo-controlled, single ascending dose study was performed in healthy volunteers (Phase 1a, EXEVIR0102, EudraCT 2021-003707-17), in parallel to an open-label, multi-center, single ascending dose study in patients hospitalized for mild to moderate COVID-19 (Phase 1b, EXEVIR0101, EudraCT 2020-005299-36, NCT04884295). Participants received a single intravenous infusion of 250, 500 or 1,000 mg of XVR011. The primary objective for both trials was the safety and tolerability of XVR011. Pharmacokinetics were evaluated as a secondary objective in Phase 1a and as an exploratory objective in Phase 1b. Efficacy (evaluated as respiratory parameters and COVID-19 clinical status) and antiviral activity in patients were evaluated as a secondary objective in Phase 1b. Immunogenicity was evaluated as an exploratory objective. Part 2 of the EXEVIR0101 study (initially a phase 1b/2 study) was not conducted due to the loss of XVR011 potency against SARS-CoV-2 Omicron BA.2. Demographics, safety, efficacy, and immunogenicity were analyzed using descriptive statistics, while pharmacokinetics were analyzed with noncompartmental pharmacokinetics (PK) modeling.In the Phase 1a study, there were no infusion-related reactions, serious treatment-emergent adverse events (TEAEs) or TEAEs grade ≥3. 22/30 volunteers (73.3%) reported 53 TEAEs (49 Grade 1, 4 Grade 2) with none being related to XVR011. The most common TEAE was headache (n = 8, 26.7%) in various treatment groups. In the Phase 1b study, 27 hospitalized patients were enrolled, and followed up to 30 days. Seven patients (25.9%) reported a total of 15 TEAEs, the majority (80%) being mild to moderate (Grade 1–2). There were no treatment-related serious TEAEs. All TEAEs resolved by the end of the study. Peak exposure (maximal concentration, Cmax) and systemic exposure (area under the curve, AUC0-t, and AUC0-inf) for XVR011 increased dose-proportionally. Geomean half-life ranged from 15.4 to 17.0 days in Phase 1a, while individual half-life ranged from 11.4 to 15.6 days in Phase 1b. SARS-CoV-2 viral load, as detected in nasopharyngeal samples by reverse transcription and quantitative polymerase chain reaction (RT-qPCR), decreased similarly in all cohorts compared to baseline. No treatment-induced anti-drug antibodies (ADA) were detected in Phase 1a. In Phase 1b, higher XVR011 concentrations increased the likelihood of ADA formation, without impacting pharmacokinetics and pharmacodynamics. No obvious dose-response in COVID-19 clinical status or respiratory parameters was observed.Technological limitations included study size, absence of placebo for the Phase 1b, absence of repeated dosing, evolving SARS-CoV-2 variants and standard-of-care. Conclusions XVR011 displayed a favourable safety, tolerability, pharmacokinetics, and immunogenicity profile, both in healthy volunteers and in patients hospitalized for mild to moderate COVID-19. These data pave the way for the design and clinical development of VHH-Fc constructs.

09.
PLOS Medicine 2026-05-13

On the evolution of the company we keep: Implications for infectious disease modeling

by Joël Mossong Whom we meet shapes how infections spread. Where earlier focus of mathematical epidemiology was on incorporating age, more recent work has begun to reveal the importance of socioeconomic aspects for understanding and managing future epidemics. In this Perspective, Joël Mossong discusses the importance of understanding social contacts and how they have evolved for infectious disease modeling, and the need to factor in additional considerations such as ethic and socioeconomic backgrounds.

10.
arXiv (CS.LG) 2026-06-19

On the Redundancy of Timestep Embeddings in Diffusion Models

arXiv:2606.20416v1 Announce Type: new Abstract: Diffusion models rely heavily on explicit timestep embeddings to modulate the denoising process across various noise scales. In this work, we challenge the necessity of these temporal signals by analyzing their impact on U-Net and Diffusion Transformer architectures. Beyond empirical evidence, we provide a theoretical framework demonstrating that, under certain conditions, the global minimizer of the diffusion training objective can be achieved without explicit timestep conditioning. Our findings reveal a surprising robustness when timestep embeddings are completely removed. Extensive ablation studies on the CelebA and CIFAR-10 datasets show that these time-agnostic models can maintain high structural fidelity and even surpass their conditioned counterparts in competitive metrics, including FID, precision, and recall. Our analysis suggests these architectures can implicitly infer noise scales from the corrupted input under specific assumptions, rendering explicit temporal conditioning redundant. This study challenges long-standing temporal conditioning paradigms and paves the way for more efficient and structurally focused generative architectures.

11.
bioRxiv (Bioinfo) 2026-06-17

DNA-binding specificity recognition from predicted homologous protein-DNA structures

Predicting protein DNA-binding specificity is essential for understanding gene regulation and disease mechanisms. Existing deep learning methods typically infer specificity from a single protein-DNA complex structure, which limits their ability to capture the diverse geometric patterns underlying protein-DNA recognition. Homologous protein-DNA interfaces provide complementary structural evidence and richer geometric features related to interatomic interactions. To address the limited diversity and coverage of experimentally determined complexes, we constructed a large-scale library of predicted homologous protein-DNA complex structures. Building on this resource, we propose HomoDSP, a template-retrieval-based framework for accurate DNA-binding specificity prediction. Benchmark evaluations and validation on newly released JASPAR 2026 samples indicate that HomoDSP outperforms existing methods in both accuracy and generalization, with particularly substantial gains on high-error samples. Moreover, this performance is largely retained when AlphaFold3-predicted complex structures are used as input. Template- and residue-level interpretability analyses suggest that HomoDSP improves prediction by focusing on DNA-affinity residues across multiple homologous templates. Finally, universal Protein Binding Microarrays evaluations on AI-designed DNA-binding proteins show that HomoDSP rescues a baseline failure mode in which the baseline method produces incorrect predictions because of training-set bias. Together, these results support the use of homologous template interfaces as informative structural priors for decoding protein DNA-binding specificity.

12.
arXiv (CS.CL) 2026-06-18

Output Vector Editing for Memorization Mitigation in Large Language Models

Large language models memorize and reproduce sequences from their training data, creating privacy, copyright, and security risks. Existing neuron-level mitigation methods equate editing with zeroing out neuron activations, but the activation only controls whether a neuron engages; the output vector is what writes to the residual stream and, through superposition, encodes multiple features. We propose output vector editing, a constrained-optimization weight edit that locates a small set of MLP neurons responsible for a memorized continuation and minimally modifies their output vectors to introduce a distractor in vocabulary space, redirecting their residual-stream contributions while leaving activations unchanged. Evaluating on four models from 360M to 7B parameters (SmolLM-360M, OLMo-1B, OLMo-7B, Llama2-7B), we center on OLMo-7B (whose open weights and pretraining corpus enable systematic mining) and mine 6831 memorized sequences, achieving up to 87.9% suppression. The 2.7$\times$ gap over zero ablation on the same located neurons shows the suppression comes from the output-vector edit, not localization alone. Four edit modes span a spectrum from aggressive suppression to minimal redirection; in ensemble they cover 96.5% of memorized sequences, while our recommended single-mode configuration reaches 81.5% with no catastrophic locality failures. We further identify a mechanistic boundary at ${\sim}14%$ of sequences unreachable by MLP-only editing; while these failures are not attention-driven overall, ablating the top contributing attention heads recovers 60–64% of them, with stronger recovery on continuations that copy tokens from the prefix, positioning attention as a complementary fallback rather than a primary mechanism. Edit mode ordering and the success-locality trade-off transfer across all four models, with success rates scaling with model size rather than family.

13.
arXiv (CS.CL) 2026-06-19

Diffusion Language Models: An Experimental Analysis

Large Language Models (LLMs) have revolutionized language modeling through autoregressive generation, enabling strong performance across a wide range of tasks. Recently, Diffusion Language Models (DLMs) have emerged as an alternative paradigm that generates text through iterative denoising rather than next-token prediction, allowing parallel refinement of entire sequences. While numerous diffusion-based architectures have been proposed, differences in evaluation protocols, datasets, inference budgets, and generation hyperparameters make it difficult to compare their capabilities and understand the trade-offs they offer. In this work, we present a systematic experimental analysis of modern DLMs. Specifically, we evaluate eight state-of-the-art DLMs across eight benchmarks spanning reasoning, coding, translation, knowledge, and structured problem solving, while explicitly considering both generation quality and computational efficiency. Beyond downstream evaluation, we analyze the impact of key inference-time factors, including denoising steps, context length, block size, and parallel unmasking strategies, and complement large-scale experiments with controlled comparisons of smaller models trained under identical conditions. Our analysis highlights the strengths and limitations of diffusion-based language modeling across different tasks, architectures, and inference budgets. We show that the behavior of DLMs is strongly influenced by generation-time design choices, leading to distinct trade-offs between performance and computational efficiency. Overall, our study provides practical insights into the capabilities and deployment characteristics of contemporary DLMs.

14.
arXiv (CS.LG) 2026-06-15

Behavioral Audit of Machine Unlearning Has a Privacy Cost

arXiv:2606.14518v1 Announce Type: new Abstract: The removal of learned data from Machine Learning models through Machine Unlearning (MU) has been widely studied; however, there has yet to be an agreed-upon scheme for auditing MU. Existing work has shown that a dishonest model owner can falsify evidence to avoid executing MU, while curious auditors (and adversaries) can infer the privacy-sensitive properties of the model and its training data even with limited access. Yet auditing of MU under mutual distrust between the model owner and the auditor remains unexplored. We provide an information-theoretic proof for this scenario: for convex ML models, a generic audit scheme that relies solely on querying the model for behavioral signals cannot identify insufficiently unlearned models without revealing membership information of the retained set. Therefore, auditing MU under the assumption of a dishonest model owner and an honest-but-curious auditor faces an inherent privacy-audit tradeoff. Our empirical results on convex models strongly supports this result, while further experiments demonstrate that this privacy-audit tension persists in non-convex models. Our results call for a more careful consideration of the privacy-audit tension under a realistic auditor threat model, and serve as a foundation for more scrutiny of designs of privacy-preserving audit schemes for the MU pipeline. We also release our code implementation at https://github.com/LiouTang/Behavioral-Unlearn-Audit.

15.
arXiv (CS.AI) 2026-06-19

RoboSSM: Scalable In-context Imitation Learning via State-Space Models

arXiv:2509.19658v2 Announce Type: replace-cross Abstract: In-context imitation learning (ICIL) enables robots to learn tasks from prompts consisting of just a handful of demonstrations. By eliminating the need for parameter updates at deployment time, this paradigm supports few-shot adaptation to novel tasks. However, recent ICIL methods rely on Transformers, which have computational limitations and tend to underperform when handling longer prompts than those seen during training. In this work, we introduce RoboSSM, a scalable recipe for in-context imitation learning based on state-space models (SSM). Specifically, RoboSSM replaces Transformers with Longhorn – a state-of-the-art SSM that provides linear-time inference and strong extrapolation capabilities, making it well-suited for long-context prompts. Through diverse experiments on the LIBERO benchmark, we demonstrate the effectiveness of applying SSMs to ICIL, achieving improved generalization to both unseen and long-horizon tasks than Transformer-based ICIL methods by handling longer contexts at test-time. These results show for the first time that SSMs are an efficient and scalable backbone for ICIL. Our code is available at https://github.com/youngjuY/RoboSSM.

16.
arXiv (CS.CV) 2026-06-11

SceneMiner: Identity-Preserving Multi-Task Fine-Tuning for Unified BEV Scene Mining

Mining hard, safety-critical scenes from driving logs is bottlenecked by the absence of difficulty labels, and no single proxy, collision risk, trajectory ambiguity, or semantic rarity suffices to find such scenes on its own. We present SceneMiner, a unified, camera-only bird's-eye-view pipeline that emits complementary mining signals from a frozen vision-language backbone in a single forward pass, with no LiDAR or radar: a retrieval embedding for text-prompted scenario search, a multi-label scene-tag distribution, and a continuous physics-based risk score (a motion forecast is a byproduct, not a contribution). Building such a multi-head model exposes our central finding, a failure mode we term cross-task interference: adding or upgrading one head shifts a shared activation stream and degrades weight-frozen sibling heads, so freezing parameters alone is insufficient. Our contribution, identity-preserving multi-task fine-tuning, removes this interference by zero-initializing every new sub-module and freezing every parameter that feeds the shared stream. The mining heads are thereby preserved bit-identically while training only ~102k parameters. The tagging head reaches mAP 0.4614 (micro-F1 0.5557) on 20 scene tags by pooling each scene into 32 visual tokens, and the embedding head supports text-prompted retrieval, validated qualitatively. Code is available at: https://anonymous.4open.science/r/sceneminer_anonymous-64E5

17.
arXiv (CS.AI) 2026-06-17

Ternary Mamba: Grouped Quantization-Aware Training of W1.58A16 State Space Models

arXiv:2606.18114v1 Announce Type: cross Abstract: State Space Models (SSMs) such as Mamba-2 offer linear-time inference but their memory footprint limits edge deployment. Prior ternary SSM work (Slender-Mamba) trains from scratch on 150B tokens; we show a pretrained checkpoint suffices, reducing the marginal token budget by 1,000x. Using grouped quantization-aware training (QAT) with knowledge distillation from a frozen FP16 teacher, we compress Mamba-2 1.3B to 3.61x (2,687 to 744 MB) and achieve 48.1% zero-shot accuracy (7-task average) in just 102M tokens (4 GPU-hours, single H100) – approaching Bi-Mamba's 48.4% (within +/-0.9pp CI). This QAT-from-pretrained setting reveals zero-ratio collapse, a novel instability caused by learnable quantization scales that does not arise in from-scratch training. We further show that post-hoc correction strategies effective for Transformers fail for SSMs due to error accumulation through the recurrence. These results demonstrate that ternary SSMs do not require expensive from-scratch training: QAT from pretrained checkpoints with KD is a data-efficient alternative.

18.
arXiv (CS.LG) 2026-06-11

Triangular-Reference Schrödinger Bridges for Time Series Generation

arXiv:2605.27478v3 Announce Type: replace-cross Abstract: Schrödinger bridges for time series (SBTS) generate synthetic paths by projecting, in relative entropy, a Brownian reference onto the path laws that match the joint distribution of the data on the observation grid. The Brownian reference, however, fixes the quadratic variation of the generated paths, which is restrictive when stochastic volatility, correlated noise, or rank-deficient covariance structures must be reproduced. We introduce "Triangular-Reference Schrödinger Bridges for Time Series" (TR-SBTS), which keeps the entropy-projection backbone of SBTS but replaces the Brownian reference by a triangular, volatility-informed, intervalwise frozen reference on a state augmented with latent covariance descriptors. The construction remains a single entropy projection on the augmented state: the minimiser is the \(h\)-transform of the reference, and on each frozen interval the optimal drift has the logarithmic-gradient form \(b^\star(t,x)=A\,\nabla\log H(t,x)\), intrinsic to the active covariance directions when the frozen covariance \(A\) is degenerate. We prove stability of the frozen approximation and consistency of the associated regularised kernel estimators, describe a reference-aware Nadaraya–Watson implementation of the conditional next-increment law, and evaluate the construction on numerical experiments.

19.
arXiv (CS.CL) 2026-06-15

Simulating Students' Java Programming Errors with Large Language Models

Understanding student errors in the programming is a cornerstone of programming education, yet obtaining a representative set of student errors for any newly designed task remains slow and costly, since authentic submissions only accumulate after extensive classroom deployment. This paper explores whether large language models (LLMs) can serve as scalable proxies for students by simulating realistic logical errors in code submissions. Using the CodeWorkout dataset of 74,000+ unique student Java submissions across 37 problems, we evaluate five LLMs under three mainstream prompting strategies: Input-Output (IO), Chain-of-Thought (CoT), and iterative Self-Refine. We assess performance along two key dimensions: diversity (the range of distinct error patterns) and alignment (alignment with authentic student mistakes), and examine how these vary by struggling level of programming tasks. Our quantitative findings reveal that while all models generate diverse errors, their alignment to human submissions diverges: Claude Sonnet 4 achieves the most balanced performance. In addition, we conducted a blinded expert annotation study (N = 401) comparing synthetic and authentic errors. This qualitative analysis confirms that the generated errors are functionally indistinguishable from authentic student errors. Moreover, higher-struggling-level problems elicit more diverse but less student-like errors. These results highlight trade-offs in using LLMs to simulate human learners and suggest design considerations for integrating synthetic errors into teachable agents, intelligent tutoring systems, and large-scale learning analytics.

20.
medRxiv (Medicine) 2026-06-18

Excess mortality in Germany during 2020-2023: A descriptive age-stratified analysis

作者:

This study investigates excess mortality in Germany in the years from 2020 to 2023 and its temporal alignment with reported COVID-19 deaths. The analysis uses annual and weekly all-cause mortality data and linear baseline trends derived from pre-pandemic years. Possible effects of demographic and population changes on baseline trends were also examined. Excess mortality was analysed over time and across age groups. Excess mortality was observed in all investigated years, rising from 2020 to its highest value in 2022. In absolute terms, the age group [≥]80 years accounted for the largest proportion of excess deaths throughout the study period. After 2021, elevated mortality relative to baseline was also observed in younger age groups down to 15 years of age, although absolute numbers remained substantially lower than in older groups. No evidence of excess mortality was observed for individuals younger than 15 years. Periods of excess mortality were temporally aligned with waves of reported COVID-19 deaths. In 2020, cumulative excess mortality after calendar week 11 closely matched reported COVID-19 deaths (43 876 vs. 41 835 deaths). Weekly excess mortality, reported COVID-19 deaths and wastewater viral load, when available showed strong temporal synchrony, although excess mortality increasingly exceeded reported COVID-19 deaths during later pandemic waves. Temporal patterns differed from the typical seasonal mortality peaks commonly associated with influenza epidemics during the early months of the year. In 2023, excess mortality declined substantially, possibly indicating a return to mortality levels before the emergence of SARS-CoV-2.

21.
arXiv (CS.AI) 2026-06-16

Adaptive inference and function vectors in deep transformers

arXiv:2606.16694v1 Announce Type: cross Abstract: Transformers are widely used as a general-purpose substrate for learning complex correlations between a large collection of coupled variables, but their internal mechanisms have remained mysterious. We introduce a theory of a deep transformer as a mean-field interacting system that implements distributed inference, subject to constraints on communication, locality and depth. We show that such a system can exploit internal state representations ('function vectors') to infer a latent context variable at increasingly finer scales over its layers. In an in-context regression task, the theory predicts a non-trivial relationship between non-Gaussian, hierarchical structure in the latent context variable, and transformer depth. Predictions are tested using constrained linear attention transformers and demonstrate adaptive inference in deep architectures. Feedforward blocks and depth enable transformers to implement a much richer class of in-context learning algorithms than previously described.

22.
arXiv (CS.CV) 2026-06-12

Skeleton Sparsification and Densification Scale-Spaces

The Hamilton-Jacobi skeleton, also known as the medial axis, is a powerful shape descriptor that represents binary objects in terms of the centres of maximal inscribed discs. Despite its broad applicability, the medial axis suffers from sensitivity to noise: Minor boundary variations can lead to disproportionately large and undesirable expansions of the skeleton. Classical pruning methods mitigate this shortcoming by systematically removing extraneous skeletal branches. This sequential simplification of skeletons resembles the principle of sparsification scale-spaces that embed images into a family of reconstructions from increasingly sparse pixel representations. We combine both worlds by introducing skeletonisation scale-spaces: They leverage sparsification of the medial axis to achieve hierarchical simplification of shapes. Unlike conventional pruning, our framework inherently satisfies key scale-space properties such as hierarchical architecture, controllable simplification, and equivariance to geometric transformations. We provide a rigorous theoretical foundation in both continuous and discrete formulations and extend the concept further with densification. By growing the skeleton successively instead of shrinking it, we allow inverse progression from coarse to fine scales. Densification scale-spaces can even reach beyond the original skeleton to produce overcomplete shape representations with relevancy for practical applications. Through proof-of-concept experiments, we demonstrate the effectiveness of our framework for practical tasks including robust skeletonisation, shape compression, and stiffness enhancement for additive manufacturing.

23.
arXiv (CS.AI) 2026-06-15

Korzhinskii-Net: Physics-Informed Neural Network for Sub-Surface Mineral Prospectivity Modelling

作者:

arXiv:2606.13695v1 Announce Type: cross Abstract: Mineral prospectivity modelling (MPM) underpins exploration economics, yet most operational pipelines reduce to data-driven classifiers trained on shallow surface proxies. Such models are blind to the subsurface physics that actually localises ore: heat advection, fluid flow, and lithology-dependent precipitation. We present Korzhinskii-Net, a 2-D radial physics-informed neural network (PINN) that couples Darcy flow, advective-diffusive heat transport, and a softplus-saturated reaction rate into a single differentiable forward model, weakly supervised by surface and remote-sensing proxies. The network is named after Dmitri S. Korzhinskii (1899-1985), whose theory of infiltration metasomatism provides the physical scaffold. We evaluate Korzhinskii-Net on five ore provinces spanning four commodity classes – Norilsk (Ni-Cu-PGE), Pechenga (Ni-Cu sulphide), Udokan (sandstone-hosted Cu), Sukhoi Log (orogenic Au), and Mirny (kimberlitic diamond) – under a fair, leakage-controlled 5-fold cross-validation protocol with hard ring-shaped negatives. Korzhinskii-Net attains a mean PR-AUC of 0.885 versus 0.281 for the strongest classical baseline (gradient boosting), and a mean fractional rank of 0.019 versus 0.413. The improvement is consistent across all five provinces and four commodity systems, suggesting that physics-informed differentiable simulators, even when constrained only by global open-data proxies, can recover localisation patterns that pure feature-based learners systematically miss. We release the full pipeline and evaluation harness as open source.

24.
arXiv (quant-ph) 2026-06-19

Matrix-product state skeletons in Onsager-integrable quantum chains

arXiv:2511.07212v2 Announce Type: replace Abstract: Matrix-product state (MPS) skeletons are connected networks of Hamiltonians with exact MPS ground states that underlie a phase diagram. Such skeletons have previously been found in classes of free-fermion models. For the translation-invariant BDI and AIII free-fermion classes, it has been shown that the underlying skeleton is dense, giving an analytic approach to MPS approximation of ground states anywhere in the class. In this paper, we partially expose the skeleton in certain interacting spin chains: the $N$-state Onsager-integrable chiral clock families. We construct MPS that form a dense MPS skeleton in the gapped regions surrounding a sequence of fixed-point Hamiltonians (the generators of the Onsager algebra). Outside these gapped regions, these MPS remain eigenstates, but no longer give the many-body ground state. Rather, they are ground states in particular sectors of the spectrum. Our methods also allow us to find further MPS eigenstates; these correspond to low-lying excited states within the aforementioned gapped regions. This set of MPS excited states goes beyond the previous analysis of ground states on the $N=2$ free-fermion MPS skeleton. As an application of our results, we find a closed form for the disorder parameter in a family of interacting models. Finally, we remark that many of our results use only the Onsager algebra and are not specific to the chiral clock model representation.

25.
arXiv (CS.CV) 2026-06-18

SMART: A Flexible, Interpretable, and Scalable Spatio-temporal Brain Atlas from High-Resolution Imaging Data

We introduce SMART, a framework for learning a flexible, interpretable, and scalable spatio-temporal brain atlas from longitudinal high-resolution 3D medical images. Existing approaches to spatio-temporal atlas construction rely on black-box generative models that lack flexibility, limit interpretability, and struggle to scale to high-dimensional data. SMART addresses these challenges by learning a continuous disease-time atlas that decouples global group-wise disease dynamics from their patient-specific anatomical manifestation. Guided by anatomically inspired priors, SMART models interpretable global trajectories of regional progression along a shared disease timeline through region-specific differential equations. Global trajectories are further personalized to individual anatomies via dense diffeomorphic displacements parameterized by a flexible and scalable multi-scale Neural Cellular Automata. Evaluated on five longitudinal MRI datasets in Alzheimer's disease (ADNI-1/GO/2, OASIS-3, AIBL; > 1,300 subjects), SMART produces anatomically meaningful predictions of disease progression and achieves state-of-the-art forecasting accuracy and improved temporal consistency over adversarial and diffusion baselines. Our approach establishes a new paradigm for flexible, interpretable, and scalable modeling of spatio-temporal change in high-dimensional medical image time-series.