Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-11

Lowest order Carleman linearization for low Reynolds long-term behaviour of fluid flow simulations

arXiv:2605.23380v2 Announce Type: replace Abstract: It is shown that the lowest (second) order truncation of the Carleman linearization of the fluid equations (C2) recovers the late stage of the evolution, namely the steady-state solution, although to a decreasing degree of accuracy at increasing Reynolds number. This asymptotic property is first proved analytically for the decaying logistic with external forcing and then shown to hold to a significant degree of accuracy also for the more complex case of two-dimensional Kolmogorov-like fluid flow at low Reynolds numbers, below $Re \sim 10$. This time-asymptotic property may open interesting prospects for the quantum simulation of low-Reynolds steady-state fluid flows.

02.
arXiv (quant-ph) 2026-06-24

Exceptional by Design: Long-Range Hopping as a Knob for Exceptional Point Control

arXiv:2606.24705v1 Announce Type: new Abstract: Exceptional points are degeneracies unique to non-Hermitian systems, where eigenvalues and eigenvectors coalesce, rendering the Hamiltonian defective. We investigate the exceptional-point structure and topological properties of a generalized non-Hermitian Rice-Mele model with balanced gain and loss, as well as next-nearest-neighbor hopping. The system hosts only second-order exceptional points under both periodic and open boundary conditions. Under periodic boundary conditions, the exceptional points in parameter space lie on lines and ellipses that are independent of the next-nearest-neighbor hopping, since the latter enters the bulk Hamiltonian only as an identity contribution. Under open boundary conditions, this independence is broken: the next-nearest-neighbor hopping not only shifts the energy of existing exceptional points but also generates new ones, with a specific condition signaling a topological gap closing observed only in the open-boundary spectrum. At special parameter points, multiple simultaneous second-order exceptional points yield degenerate configurations whose degeneracy grows with system size. Exceptional point locations are identified numerically via the condition number of the eigenvector matrix and confirmed by Jordan decomposition. The topological phase diagram, computed via a winding number framework for non-Hermitian systems without symmetry protection, reveals sectors with zero, one, and two edge states; the bulk-boundary correspondence is confirmed, and the non-Hermitian skin effect is absent.

03.
PLOS Computational Biology 2026-05-29

Structural and dynamic basis of NOD2 tandem CARD association and NOD1/2–RIP2 signaling complexes

by Jitendra Maharana, Aritra Bej, Debasish Biswal, Debashis Panda, Arjun Sharma NOD1 and NOD2, founding members of the NOD-like receptor (NLR) family, play a crucial role in host defense against bacterial infections. Recognition of peptidoglycan-derived ligands triggers ATP-dependent oligomerization of the NACHT domain, exposing the CARD domains that recruit the adaptor protein RIP2 via CARD–CARD interactions to activate the NF-κB signaling cascade. Although NOD1/2-RIP2 interactions and RIP2CARD filament assembly are established, the precise interfaces that stabilize hetero–CARD filaments remain poorly defined. Here, we integrate in silico structural modeling with molecular dynamics (MD) simulations to elucidate structurally compatible arrangements of NOD1–RIP2 and NOD2–RIP2 hetero–CARD filaments. Our results reveal that NOD1CARD subunits form a structurally compatible homomeric scaffold via canonical (type-I–III) interfaces, accommodating multiple tiers of RIP2CARD rings at both filament termini. Meanwhile, the NOD2 tandem CARDs adopt multiple discrete conformations, reflecting a more intricate structural mechanism. In stable filament conformations, tandem CARDs converge at the type-II interface, with RIP2CARD rings stacking onto CARDa (top-down) and CARDb (bottom-up) interfaces, highlighting the structural role of NOD2CARDb in RIP2-mediated CARD–CARD interaction. In silico mutagenesis, involving charge-reversal and alanine scanning of key interfacial residues, disrupts NOD1–RIP2 and NOD2–RIP2 interactions at both top-down and bottom-up interfaces, leading to rapid interface destabilization within 0.1–0.4 μs of simulation. Together, these results reveal conserved and receptor-specific mechanisms governing NOD1/2–RIP2 CARD–CARD interactions and provide deeper structural and dynamic insights into the complex structural mechanisms for NLR-mediated inflammatory signaling.

04.
arXiv (CS.AI) 2026-06-12

EpiBench: Verifiable Evaluation of AI Agents on Epigenomics Analysis

arXiv:2606.13602v1 Announce Type: new Abstract: We introduce EpiBench, a verifiable benchmark for short-horizon epigenomics analysis. EpiBench evaluates whether agents can make well-defined analysis decisions from realistic workflow states and return deterministically gradable answers. The benchmark includes 106 evaluations across CUT\&Tag/CUT\&RUN, ATAC-seq, ChIP-seq, and DNA methylation workflows. Across 5,088 valid trajectories from 16 model-harness pairs, no system passed a majority of attempts: GPT-5.5 / Pi led at 45.0\% (143/318 attempts; 95\% confidence interval (CI), 36.3–53.7), followed by GPT-5.5 / OpenAI Codex at 39.9\% (127/318 attempts; 95\% CI, 31.6–48.3). Claude Opus 4.8 Max / Pi and GPT-5.4 / Pi each passed 39.0\% (124/318 attempts; 95\% CI, 30.2–47.8 and 31.0–47.0, respectively). Performance varies across assay types, and many failed runs still contain parts of the correct answer. Agents often found the right files and computed useful intermediate results, but failed when the task required deeper, assay-specific scientific judgment.

05.
arXiv (CS.LG) 2026-06-18

Some Complexity Results for Robustness Verification for Binarized Neural Networks

arXiv:2606.18918v1 Announce Type: new Abstract: This paper studies the computational complexity of verification problems for Binarized Neural Networks (BNNs), where activations (and sometimes weights) are binary. We analyze two problems: satisfiability and robustness under uniform image occlusion. We show that BNN satisfiability is NP-complete via a reduction from Boolean satisfiability problem (SAT), and that uniform occlusion induces a piecewise-constant structure in the network output, enabling a polynomial-time robustness-checking algorithm.

06.
arXiv (CS.LG) 2026-06-16

Towards Data-Efficient Cross-Device Generalization of Grad-Shafranov Equilibria via Transfer Learning Neural Operator

arXiv:2606.15512v1 Announce Type: new Abstract: Real-time reconstruction of magnetohydrodynamic equilibria is essential for plasma shaping, stability assessment and feedback control in magnetic confinement fusion. However, Grad-Shafranov equilibrium calculations remain largely device-specific and iterative, limiting their use in latency-constrained control settings. Existing neural approaches can accelerate individual equilibrium predictions, but they do not generally provide reusable models across changing plasma boundaries or tokamak geometries. Here we show that equilibrium reconstruction can be recast as a cross-device operator learning problem. We develop a domain-specific neural operator framework that maps geometry and profile parameters directly to the poloidal flux field, replacing repeated solve-on-demand computation with amortized operator inference. Using the analytically tractable Solov'ev family as a controlled Grad-Shafranov testbed, we generate equilibria across eight geometrically distinct tokamak-like configurations and benchmark five neural operator architectures under four transfer-learning strategies. Single-geometry pretraining gives poor transfer to unseen devices, whereas multi-geometry pretraining enables data-efficient adaptation. The Wavelet Neural Operator gives the strongest cross-geometry performance, reaching mean relative L2 errors below 4% with 100 labelled target equilibria and below 2% with full fine-tuning. The predicted magnetic fields satisfy the divergence-free constraint to numerical precision, and four architectures achieve millisecond or sub-millisecond inference. These results identify neural operator pretraining as a route towards reusable, real-time equilibrium inference across fusion device configurations.

07.
arXiv (CS.LG) 2026-06-18

On the Stability of Nonlinear Dynamics in GD and SGD: Beyond Quadratic Potentials

arXiv:2602.14789v2 Announce Type: replace Abstract: The dynamical stability of the iterates during training plays a key role in determining the minima obtained by optimization algorithms. For example, stable solutions of gradient descent (GD) correspond to flat minima, which have been associated with favorable features. While prior work often relies on linearization to determine stability, it remains unclear whether linearized dynamics faithfully capture the full nonlinear behavior. Recent work has shown that GD may stably oscillate near a linearly unstable minimum and still converge once the step size decays, indicating that linear analysis can be misleading. In this work, we explicitly study the effect of nonlinear terms. Specifically, we derive an exact criterion for stable oscillations of GD near minima in the multivariate setting. Our condition depends on high-order derivatives, generalizing existing results. Extending the analysis to stochastic gradient descent (SGD), we show that nonlinear dynamics can diverge in expectation even if a single batch is unstable. This implies that stability can be dictated by a single batch that oscillates unstably, rather than an average effect, as linear analysis suggests. Finally, we prove that if all batches are linearly stable, the nonlinear dynamics of SGD are stable in expectation.

08.
arXiv (CS.CV) 2026-06-19

PCFootprint: A Large-Scale Dataset and Benchmark for Vectorized Building Footprint Extraction from Aerial LiDAR Point Clouds

Building footprint extraction is a fundamental task in photogrammetry, remote sensing, and computer vision. Recent image-based methods have achieved remarkable progress in extracting vectorized footprints from high-resolution optical imagery. However, optical imagery inherently susceptible to occlusions, perspective distortions, and residual relief displacement, yielding incomplete or misaligned footprint extraction. Furthermore, the lack of explicit elevation information limits its direct applicability to Level of Detail building modeling. In this paper, we present PCFootprint, the first large-scale public dataset for footprint extraction from airborne laser scanning point clouds. PCFootprint comprises \num{33000} tiles derived from the Estonian Land and Spatial Development Board, covering diverse urban and rural landscapes. Each tile spans \qtyproduct{128 x 128}{\m} with systematically aligned vectorized footprints aligned to point clouds. The dataset includes a \num{3000} tiles cross-domain test set for evaluating generalization across geographic regions. We establish comprehensive benchmarks by evaluating mainstream methods. Experimental results reveal significant challenges including high intra-class variance, data imbalance, and noise across complex geospatial environments. We believe PCFootprint will advance future research in building modeling, urban scene understanding, and geospatial analysis. The PCFootprint dataset is publicly available at \url{https://huggingface.co/datasets/Haoyuan-Shen/PCFootprint}.

09.
arXiv (CS.AI) 2026-06-15

VHDLSuite: Unified Pipeline for LLM VHDL Generation with Data Synthesis and Evaluation

arXiv:2606.13735v1 Announce Type: cross Abstract: Large Language Models (LLM) have shown impressive capabilities in Register Transfer Level (RTL) code generation, particularly for Verilog. However, evaluating their performance with other Hardware Description Languages (HDL), especially VHDL, remains limited although its distinct language characteristics, such as stricter semantic rules, introduce evaluation considerations that differ from Verilog. This lack of coverage restricts fully understanding of how well current models generalize across hardware design languages with differing structures and semantics. To address this gap, we introduce VHDLSuite, a benchmark-centered infrastructure for scalable VHDL generation evaluation, integrating automated benchmark synthesis, executable validation, and multi-model diagnostic analysis. First, we propose a data pipeline that automatically converts Verilog designs and their accompanying testbenches into executable VHDL benchmark instances, followed by VUnit/GHDL-based validation to ensure each released task is compilable, runnable, and consistently checkable in the VHDL environment. Second, we introduce VHDLBench, a benchmark with over 200 VHDL problems with complete and validated testbenches across a wide range of complexity levels. Third, we extensively evaluate cutting-edge LLMs and uncover key challenges specific on LLM-aided VHDL generation. Our findings provide important insights and support future work in multi-language hardware design automation.Our data pipeline, benchmark, and evaluation framework will be open-sourced.

10.
arXiv (CS.AI) 2026-06-16

Recurrent Reasoning on Symbolic Puzzles with Sequence Models

arXiv:2606.15686v1 Announce Type: new Abstract: Large language models often appear strong on symbolic and algorithmic tasks, yet this apparent strength can hide brittle behaviour when problems become longer, harder, or slightly out of distribution. A major limitation of current reasoning benchmarks is that many primarily test whether a model can produce a valid answer, while paying less attention to whether the solution is minimal, robust, and stable under controlled difficulty scaling. We introduce RecurrReason, a difficulty-controlled benchmark of four recurrent logic puzzles (Tower of Hanoi, River Crossing, Block World, and Checkers Jumping) with BFS-optimal trajectories and a single interpretable difficulty parameter $N \in \{1,\dots,10\}$, totalling 10{,}817 unique puzzles and 285{,}933 moves. We benchmark two Transformer families, an encoder-decoder model (T5-style) and a decoder-only model (GPT-2-style), under consistent data splits and evaluation criteria, training on $N{=}1$ to $7$ and evaluating on both held-out in-distribution instances and harder out-of-distribution instances at $N{=}8$ to $10$. Fine-tuned pre-trained T5 achieves 97.27\% validation and 81.00\% OOD accuracy on Block World; all models score 0.00\% on River Crossing under all conditions. Failure mode analysis reveals that architecture is a stronger determinant of success than scale. Pre-training transfers only to puzzles with locally structured transition functions. Our code and dataset will be open-sourced upon acceptance.

11.
arXiv (CS.CV) 2026-06-19

Contour-Constrained Deformable Registration with Parameter Characterization for Head and Neck Surgical Guidance

With 890,000 annual new cases globally, head and neck squamous cell carcinoma has one of the highest recurrence rates among solid malignancies. Although frozen section analysis is the standard of care for intraoperative margin assessment, accurately relocating detected positive margins on the resection bed remains challenging due to imprecise alignment between resected specimens and their resection bed, compounded by post-resection mucosal tissue shrinkage. We present a biomechanics-driven deformable registration framework that corrects post-resection tissue deformation to provide intraoperative guidance. Our approach registers 3D specimen meshes to intraoperative resection bed point clouds using a deformable registration approach based on regularized Kelvinlet basis functions. The registration matches surface point clouds, fiducial landmarks, and boundary contour constraints that directly penalize perpendicular distance-to-agreement between specimen and resection bed boundaries. Across nine specimens from skin, buccal mucosa, and tongue sites, the overall mean target registration error was $11.11 \pm 4.07$ mm using rigid registration, which decreased to $8.20 \pm 2.68$ mm (26.19\% reduction) using deformable registration without contour constraint. The proposed contour-constrained deformable registration further reduced the error to $5.62 \pm 2.28$ mm, a 49.41\% reduction relative to rigid registration. We observed the largest reduction in the most clinically challenging tongue specimens. We also performed a systematic two-stage parameter search to characterize the relative importance of surface alignment, fiducial correspondences, contour constraint, and strain energy regularization. This search revealed that contour weighting dominates registration accuracy for tissue types with large lateral deformation, while the algorithm operates over a broad range of parameter combinations.

12.
arXiv (CS.CL) 2026-06-18

VISUALSKILL: Multimodal Skills for Computer-Use Agents

Computer-use agents (CUAs) approach human-level performance on standardised benchmarks but still struggle on long-horizon tasks and unseen software. Existing skill libraries address this with reusable skills, but represent the skill artifact as text only, despite the visual nature of GUI interaction. We propose VISUALSKILL: a hierarchical multimodal skill, tailored to each target application and organised as a central index over per-topic files, which the agent consumes through a load_topic MCP tool that fetches the relevant topic's text and figures on demand. We construct each skill with a two-stage pipeline that combines authored documentation with live-application UI exploration. On two CUA benchmarks, CUA-World and OSExpert-Eval, a Claude Code CLI agent backed by Claude Opus 4.6 reaches an average score of 0.456 with VISUALSKILL, a +15.3 point absolute lift over the no-skill baseline (0.303). Against a matched text-only skill that is generated from the same source content and differs from VISUALSKILL only in modality, VISUALSKILL yields a further +8.3 point absolute gain over the matched text-only skill (0.373 vs. 0.456), providing direct evidence that retaining visual figures in the skill artifact, rather than verbalizing them away, helps the agent both identify UI elements and verify workflow state after each action. Our code is available at https://github.com/XMHZZ2018/VisualSkills.

13.
arXiv (quant-ph) 2026-06-16

Certified Finite-Shot Operating Windows for Virtual Distillation and Symmetry Verification

arXiv:2606.15464v1 Announce Type: new Abstract: Quantum error mitigation methods are usually compared through their infinite-shot bias, but on real devices the comparison is decided by finite sampling budgets, estimator instabilities, and per-shot resource costs. We develop a finite-shot operating-window theory that makes this comparison certifiable for virtual distillation (VD) and symmetry verification (SV): for each method we derive a mean-squared-error law with explicit, non-asymptotic remainder constants. For VD, the law captures the statistical bias and denominator instability of its quotient estimator, with a concentration certificate locating the sample size beyond which the quotient is trustworthy; for SV, it isolates the bias floor left by undetectable errors and the sampling penalty set by the acceptance probability. A selection trichotomy classifies any two-method comparison into a tie, uniform dominance, or a genuine tradeoff with a certified crossing window, including a self-consistency test that rejects spurious crossings. The theory makes falsifiable predictions – operating-window locations scaling as $p^{-2}$ or $p^{-1}$ in the noise rate, and the sign pattern of all pairwise comparisons – which exact white-box experiments confirm with fitted exponent $-1.97$ against the predicted $-2$ and with $300/300$ sign agreement, within a pre-registered analysis whose single failed gate, an over-strict all-instance criterion, is reported and audited in full. Gate-level simulation and archived runs on two IBM backends then test the windows under device conditions: idealized VD windows exist, but realistic interferometry overhead and denominator instability erase them, and calibrated SV is the practical winner in the tested QAOA instances. This absence of a universal winner is not a failure of mitigation; it is the regime structure that certified operating windows predict.

14.
arXiv (CS.CV) 2026-06-16

Improved Baselines with Representation Autoencoders

Representation Autoencoders (RAE) replace traditional VAE with pretrained vision encoders. In this paper, we systematically investigate several design choices and find three insights which simplify and improve RAE. First, we study a generalized formulation where the representation is defined as sum of the last k encoder layers rather than solely the final layer. This simple change greatly improves reconstruction without encoder finetuning or specialized data (e.g., text, faces). Second, we study the prevalent assumption that RAE (using pretrained representation as encoder) replaces representation alignment (REPA), which distills the same representation to intermediate layers instead. Through large-scale empirical analysis, we uncover a surprising finding: RAE and REPA exhibit complementary working mechanisms, allowing the same representation to be used as both encoder and target for intermediate diffusion layers. Finally, the original RAE struggles with classifier-free guidance (CFG) and requires training a second, weaker diffusion model for AutoGuidance (AG). We show that REPA itself can be viewed as x-prediction in RAE latent space. By simply re-parameterizing the output of the DiT model, it can provide guidance for "free". Overall, RAEv2 leads to more than 10x faster convergence over the original RAE, achieving a state-of-the-art gFID of 1.06 in just 80 epochs on ImageNet-256. On FDr6, RAEv2 achieves a state-of-the-art 2.17 at just 80 epochs compared to the previous best 3.26 (800 epochs) without any post-training. This motivates EPFID@k (epochs to reach unguided gFID < k) as a measure of training efficiency. RAEv2 attains an EPFID@2 of 35 epochs, versus 177 for the original RAE. We also validate our approach across diverse settings for text-to-image generation and navigation world models, showing consistent improvements. The code is available at https://raev2.github.io.

15.
arXiv (quant-ph) 2026-06-17

Cumulant expansion approach to the decay dynamics of interacting Mössbauer nuclei after strong impulsive excitation

arXiv:2510.00970v2 Announce Type: replace Abstract: Recent progress in accelerator-based x-ray sources brings higher excitation of ensembles of Mössbauer nuclei closer to experimental feasibility. Yet, a theoretical modeling of the decay dynamics of the interacting nuclear ensemble after the impulsive excitation is still an open challenge. Here, we derive a set of nonlinear equations which is capable of efficiently modeling large nuclear ensembles for arbitrary degrees of excitation. As key signature for higher excitation, we identify a non-linear time-evolution of the nuclear dipole phase, which can be tuned via the scattering geometry, and interferometrically be measured. Furthermore, we identify interesting finite-size effects in the nuclear dynamics of small ensembles. Our results provide important guidance for future experiments aiming at the non-linear excitation of nuclei. We further envision the exploration of finite size-effects in Mössbauer spectroscopy with highest spatial resolution, i.e., small sample volumes.

16.
arXiv (CS.CV) 2026-06-24

FiCA: Feed-forward instant Gaussian Codec Avatars from a Single Portrait Image

We introduce FiCA, a Feed-forward, instant Gaussian Codec Avatar generation pipeline that creates lifelike avatars from a single portrait image. Generating a photorealistic and drivable avatar from just a single image is significantly challenging due to the limited visual information available to accurately infer the 3D appearance and geometry of human heads. To address this, we develop a novel system that combines human-centric vision foundation models with a diffusion model. This system is designed to fully exploit partial visual observations to generate lifelike human avatars. Our proposed diffusion model learns a generative mapping from these partial observations to complete and authentic 3D mesh reconstruction. Additionally, we introduce a feed-forward mesh refinement network that enhances the fidelity and identity preservation of the generated avatars, eliminating the need for person-specific test-time optimization. By leveraging a universal prior model that decodes a generated mesh into a set of 3D Gaussians, we generate a photorealistic 3D Gaussian avatar, capable of being driven with novel expressions in real-time. Our experiments demonstrate that the avatars generated by our feed-forward approach faithfully represent diverse identities and surpass the visual quality of avatars produced by recent competing methods.

17.
arXiv (CS.LG) 2026-06-24

Mixtures Closest to a Given Measure: A Semidefinite Programming Approach

arXiv:2509.22879v2 Announce Type: replace-cross Abstract: Mixture models, such as Gaussian mixture models, are widely used in machine learning to represent complex data distributions. A key challenge, especially in high-dimensional settings, is to determine the mixture order and estimate the mixture parameters. We study the problem of approximating a target measure, available only through finitely many of its moments, by a mixture of distributions from a parametric family (e.g., Gaussian, exponential, Poisson), with approximation quality measured by the 2-Wasserstein or the total variation distance. Unlike many existing approaches, the parameter set is not assumed to be finite; it is modeled as a compact basic semi-algebraic set. We introduce a hierarchy of semidefinite relaxations with asymptotic convergence to the desired optimal value. In addition, when a certain rank condition is satisfied, the convergence is even finite and recovery of an optimal mixing measure is obtained. We also present an application to clustering, where our framework serves either as a stand-alone method or as a preprocessing step that yields both the number of clusters and strong initial parameter estimates, thereby accelerating convergence of standard (local) clustering algorithms.

18.
arXiv (CS.CV) 2026-06-16

BadWorld: Adversarial Attacks on World Models

Visual world models (VWMs) synthesize interactive, action-conditioned rollouts from a single context image. However, it remains an open question how robust these models are to adversarial perturbations. Standard adversarial attacks fail to assess this vulnerability because attackers lack ground-truth future videos and cannot predict subsequent user controls. We introduce BadWorld, a label-free adversarial framework tailored for autoregressive VWMs that systematically overcomes both constraints. First, to bypass the need for future supervision, we propose a self-supervised velocity attack that directly disrupts the early denoising dynamics of the model. Second, to ensure the attack generalizes across unpredictable user actions, we formulate a trajectory-adaptive bi-level optimization that actively mines hard control sequences to forge control-agnostic perturbations. Evaluated on representative VWMs with continuous and discrete controls, BadWorld exposes severe structural fragility. Visually indistinguishable adversarial images reliably trigger catastrophic degradation in future rollouts, leading to incomplete denoising, structural collapse, and control inconsistency. These findings reveal critical risks for deploying VWMs in safety-critical systems while highlighting a practical mechanism for privacy protection.

19.
arXiv (quant-ph) 2026-06-17

Demultiplexing Generalized Information via Quantum Transmission Lines

arXiv:2606.17894v1 Announce Type: new Abstract: Demultiplexers are the fundamental primitives of network architecture, enabling perfect routing of an input classical signal to a designated one, among multiple output ports. Quantum transmission lines, having access to the quantum systems directly, are able to transmit both the classical and quantum information encoded in quantum systems. A natural question therefore emerges that whether the scrambled classical and quantum information in a quantum system can be perfectly demultiplexed in the designated classical and quantum output ports? Here we answer this question by introducing a quantum to quantum-classical device, namely the quantum demultiplexer (Q-DEMUX). We characterize the class of Q-DEMUXs enabling perfect routing of both the classical and the quantum information along with their simple circuit realizations. Our results highlight an explicit connection between the strength of a Q-DEMUX with the incompatibility of quantum instruments. Finally, we extend the notion in a stronger variant where the sender is oblivious regarding the nature of the data to be transmitted through the Q-DEMUX.

20.
Nature (Science) 2026-06-10

Mitochondria tethered to the nucleus secure its energy supply

Direct interactions between the cell’s powerhouses and nuclear pores might channel energy straight into the nucleus, fuelling cell division and differentiation. Direct interactions between the cell’s powerhouses and nuclear pores might channel energy straight into the nucleus, fuelling cell division and differentiation.

21.
bioRxiv (Bioinfo) 2026-06-16

scIsoAgent enables autonomous isoform-resolved characterization and sequence-informed interpretation of long-read single-cell transcriptomes

Alternative isoform usage can alter gene function independently of total gene expression, creating a need to resolve transcript isoforms at single-cell resolution. Long-read single-cell RNA sequencing meets this need by linking cellular identity to transcript isoforms and sequence-level features. Realizing its full biological value requires reproducible workflows that connect specialized long-read analysis with biological interpretation. Existing large language model (LLM)-based biomedical agents support general omics analysis, but are not designed for isoform-resolved long-read single-cell workflows. Here, we present scIsoAgent, an autonomous LLM-powered scientific agent for long-read single-cell RNA-seq analysis. scIsoAgent turns heterogeneous long-read single-cell inputs into traceable isoform-resolved workflows, using stage-aware planning and persistent computational context to support both execution and interpretation. Across complementary evaluations, this design improved the continuity from analysis planning to executable, interactive workflows compared with general-purpose LLM baselines. In real-data reanalysis, scIsoAgent recovered major findings from published long-read single-cell resources and extended a representative differential transcript usage event into a sequence-informed functional hypothesis. By linking full-length isoform sequences with model-inferred transcript properties, scIsoAgent connects observed isoform usage with potential sequence-level functional consequences. These results demonstrate that autonomous scientific agents can transform fragmented long-read single-cell analysis into coherent, reproducible workflows for isoform-resolved discovery and biological interpretation.

22.
arXiv (quant-ph) 2026-06-24

A Hybrid Quantum-Classical Approach for Melt Pool Prediction in Laser Powder Bed Fusion

arXiv:2606.23719v1 Announce Type: new Abstract: Laser powder bed fusion (LPBF) is a promising additive manufacturing technique that suffers from quality assurance concerns. Predicting melt pools from process parameters is crucial for assessing quality prior to manufacturing but remains a difficult problem because of the complex physical processes underlying LPBF. Quantum computers present a new computing paradigm, providing a new approach to information processing using quantum entanglement and superposition. This paper presents a practical demonstration of a hybrid quantum-classical model that leverages quantum computing to improve process parameter feature extraction with a quantum feature encoder. To make the quantum approach computationally feasible for large datasets, we first employ a clustering algorithm to reduce the number of expensive quantum computations. These quantum features are then processed by a classical neural network to predict the melt pool morphology, allowing for more accurate predictions of melt pools. We demonstrate the method using a quantum simulator, analyze the effect of measurement shot noise on the predictive performance of the network, and verify the results using quantum hardware. Finally, by examining which quantum features are most important, we provide insights that can inform the future design of more effective quantum encoding circuits. Ultimately, the performance improvement over purely classical networks validates the hybrid approach, demonstrating an engineering application of quantum computing using noisy and intermediate scale quantum (NISQ) devices.

23.
arXiv (quant-ph) 2026-06-15

Quantifying and detecting quantum-state texture

arXiv:2604.07257v2 Announce Type: replace Abstract: Quantum-state texture is a recently proposed quantum resource that characterizes the inhomogeneity of a quantum state's matrix element distribution in the computational basis, enriching our understanding of quantum state structure. To expand its quantification toolkit and establish detection methods, in this article, we investigate the resource theory of texture from both quantitative and detection perspectives. First, we construct a texture measure $\mathcal{T}^{GR}_{\alpha,z}(\rho)$ based on the $\alpha$-$z$ Rényi relative entropy and present some of its inherent properties. Second, we analyze the mathematical relationships between several existing texture measures, revealing connections among different quantifiers. Finally, drawing on the witness concept from other resource theories, we systematically introduce texture witnesses into the texture theory and provide examples of texture witnesses with special properties.

24.
arXiv (CS.LG) 2026-06-11

Projected random forests and conformal prediction of circular data

arXiv:2410.24145v3 Announce Type: replace-cross Abstract: We apply conformal prediction techniques to regression problems with circular responses, producing prediction sets with adaptive arc length and finite-sample coverage guarantees for any circular predictive model under the assumption of data exchangeability. Leveraging the high performance of existing predictive models designed for linear responses, we analyze a general projection procedure that converts any linear-response regression model into one suitable for circular responses. When random forests are used as base models in this projection procedure, we leverage the random forest out-of-bag mechanism to eliminate the need for a separate calibration sample in the construction of prediction sets. On synthetic and real datasets, the resulting projected random forest model produces more efficient out-of-bag conformal prediction sets, with shorter median arc length, than the split conformal prediction sets generated by two existing alternative models.

25.
arXiv (CS.LG) 2026-06-18

ToolChain-CRC: Conformal Risk Control for Agentic AI Under Retrieval and Tool-Use Drift

arXiv:2606.18467v1 Announce Type: cross Abstract: Modern AI agents retrieve documents, call tools, check intermediate information, and then produce a final answer or action. This creates a risk-control problem that is not visible from the final answer alone. A final response may look acceptable even when the retrieval was weak, a tool output was wrong, or an earlier step was unsupported. We propose ToolChain-CRC, a conformal risk-control method for retrieval-augmented and tool-using agents under drift. The method treats each agent run as a full trajectory of actions, observations, and final output. It builds step-level risk scores, combines them into a trajectory risk score, calibrates an accept-or-intervene rule, and adds an anytime alarm that can stop risky runs before the final answer. We prove trajectory-level risk control under exchangeable calibration runs, give a drift-aware extension with auditable constants, and prove an anytime escalation rule through a supermartingale construction. Experiments cover synthetic tool-chain drift, RAG/tool-use stress tests, public SQuAD-derived retrieval tasks, an API-free agentic QA case study, ablations, target-risk sensitivity checks, 20-seed robustness checks, a drift-margin audit, and a live RAG/tool-use agent benchmark. Across these settings, final-answer-only calibration can miss retrieval and tool failures, while trajectory-level calibration keeps accepted-trajectory risk below the target.