Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-17

Sao Tome and Principe on the verge of eliminating lymphatic filariasis as a public health problem: evidence from IDA impact assessment surveys

Background Accelerated efforts to eliminate lymphatic filariasis (LF) as a public health problem have been supported by the introduction of the triple-drug regimen of ivermectin, diethylcarbamazine and albendazole (IDA) in endemic settings. In Sao Tome and Principe, nationwide mass drug administration (MDA) with diethylcarbamazine and albendazole was implemented in 2018, followed by IDA in 2019 and 2020. This study assesses progress towards elimination using post-MDA impact assessment surveys conducted after cessation of treatment. Methods Cross-sectional surveys were conducted among adults aged 20 years and older in 2022 and again between December 2024 and January 2025. Circulating filarial antigen (CFA) was detected using the filarial test strip (FTS). Individuals who tested positive were examined for microfilaremia using nocturnal calibrated thick blood smear microscopy. Additionally, programme data on MDA coverage and morbidity were obtained from national surveillance records. Results Three rounds of nationwide MDA achieved high epidemiological coverage (86.4% in 2018, 74.2% in 2019 and 80.0% in 2020). The impact assessment surveys conducted in 2022 evaluated 14 132 adults, with 21 individuals (0.15%) testing positive for CFA, while the follow-up survey conducted between December 2024 and January 2025 assessed 14 653 adults and detected seven positive cases (0.05%). No microfilariae were detected among the 28 antigen-positive individuals examined using nocturnal calibrated thick blood smears. National morbidity records documented 190 cases of lymphoedema and nine cases of hydrocoele. Conclusions Infection indicators remain well below WHO decision thresholds, suggesting that LF transmission is unlikely to be sustained. Sao Tome and Principe appears to be close to eliminating LF as a public health problem. However, strengthening morbidity management services will be essential to support the preparation of the national elimination dossier.

02.
arXiv (quant-ph) 2026-06-11

Measurement-Free Toric-Code Memory in Array Globally Controlled Rydberg Array

arXiv:2606.12030v1 Announce Type: new Abstract: The central prerequisite of any fault-tolerant quantum architecture is a quantum memory: a block of encoded physical qubits whose logical state is actively preserved against noise across many rounds of error correction. In neutral-atom Rydberg arrays, realizing such a memory is obstructed not by the entangling gates themselves, which are already fast and high-fidelity, but by the auxiliary operations that a conventional error-correction cycle requires: mid-circuit fluorescence measurement, inter-zone atom transport, and locally focused single-qubit addressing. Each of these introduces latency, atom loss, or optical crosstalk that exceeds the cost of the underlying gates by orders of magnitude. These costs accumulate cycle after cycle, progressively degrading the very logical information the code is meant to protect. Here we propose a protocol that stabilizes a toric-code quantum memory without moving, measuring or local addressing atoms. The key is to use a three-species Rydberg atom array for the complete stabilizer cycle, including syndrome extraction, coherent correction, and ancilla reset, under global, species-selective laser pulses. Numerical simulation of a $4 \times 4$ rotated toric code shows a longer qubit lifetime when the physical error rate is below a pseudo-threshold $p^\star \approx 0.034$. The scheme offers a concrete, hardware-efficient route to topological quantum memory in neutral-atom platforms.

03.
bioRxiv (Bioinfo) 2026-06-20

RNAStabFormer: Region-Aware Multi-Task Hybrid Learning for RNA Stability Prediction from Pulse-Chase Transcriptomics

作者:

RNA stability is a central layer of post-transcriptional gene regulation, yet large-scale stability labels derived from pulse-chase transcriptomics depend strongly on quantification region, time-window definition, and replicate quality control. We present RNAStabFormer, a controlled learning framework for predicting human RNA stability proxies from transcript sequence. Its core model, RAMHT, combines region-specific nucleotide Transformer encoders for CDS, and sequence, a CDS codon stream, engineered sequence-grammar features, gated fusion, and four task-specific regression heads. We construct four strict consensus labels from ENCODE BrU-seq/BruChase-seq data by crossing gene-sense and exon-sense quantification with late-chase 6 h/2 h and total-chase 6 h/0 h retention ratios, and evaluate all models on fixed repeated-random and chromosome-holdout splits. Across chromosome holdouts, XGBoost remains the strongest standalone model, with median Pearson correlations of 0.504, 0.544, 0.546, and 0.778 on the four labels. RAMHT is competitive with raw-sequence deep models but does not universally exceed engineered-feature baselines. A strict nested RAMHT–XGBoost blend nevertheless improves gene total-chase prediction by 0.017 mean Pearson and exon late-chase prediction by 0.004 mean Pearson over XGBoost. Region and mechanism analyses show that CDS, local k-mer composition, and codon-sensitive signals dominate predictive information. RNAStabFormer therefore provides both a multi-task neural model and a leakage-controlled evaluation protocol for RNA stability prediction from pulse-chase data.

04.
arXiv (CS.CL) 2026-06-19

MENTOR: Reinforcement Learning via Flexible Teacher-Optimized Rewards for Tool-Use Distillation

Distilling the tool-use capabilities of large language models (LLMs) into small language models (SLMs) is essential for their practical application. The predominant approach, supervised fine-tuning (SFT), suffers from poor out-of-domain (OOD) generalization due to its rigid alignment with static teacher trajectories. While reinforcement learning (RL) offers an alternative, the capacity limitations of SLMs pose a severe dilemma: sparse outcome rewards provide insufficient guidance, whereas strict trajectory matching imposes overly restrictive constraints. To bridge this capacity-driven gap, we propose MENTOR, which introduces a flexible yet process-aware reward structure. Instead of enforcing rigid replication, MENTOR uses the teacher's reference to guide tool-use behavior, balancing behavioral alignment with downstream performance. Extensive experiments on controlled executable-tool benchmarks demonstrate that MENTOR improves OOD tool-use performance compared to SFT and strict RL baselines. Our findings suggest that within verifiable tool-use environments, flexible tool-use alignment offers a more effective approach than strict trajectory replication for developing adaptable small models.

05.
arXiv (CS.LG) 2026-06-16

Distilling latent electrostatics from foundation machine learning interatomic potentials

arXiv:2606.15001v1 Announce Type: cross Abstract: Foundation machine learning interatomic potentials (MLIPs) have enabled atomistic simulations across broad regions of chemical and materials space, but many remain computationally expensive and lack explicit electrostatics, limiting their use for systems governed by long-range interactions and electrical response. Previously, we introduced Latent Ewald Summation (LES), which learns latent atomic charges and long-range electrostatics from density functional theory (DFT) energy and force labels alone. Here, we use LES to extract electrostatics that are latent in foundation models: energies and forces predicted by a teacher model are used to train a lightweight LES-augmented student MLIP, with optional fine-tuning on additional DFT data. The resulting models reduce computational cost while providing access to Born effective charge tensors, and infrared spectra. We benchmark student models distilled from a broad set of foundation MLIPs, including UMA, MACE, Orb, eSEN, GemNet-OC, PET, and EquiformerV2-based models, against experimental infrared spectra for liquid water, concentrated hydrochloric acid, and the anatase TiO2(101)-water interface. Across these systems, electrostatic response can be extracted from most foundation MLIPs. The benchmark further shows that the underlying DFT level and dataset used to train the teacher model play a larger role than architecture in determining electrostatic and spectroscopic accuracy. For the TiO2-water interface, fine-tuning with a modest amount of higher-level DFT data improves structural and infrared predictions. LES-based distillation therefore provides a practical route for converting foundation MLIPs into efficient, electrically responsive models, while also testing the physical fidelity encoded in foundation models.

06.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

07.
arXiv (CS.AI) 2026-06-19

Hierarchical Control in Multi-Agent Games: LLM-based Planning and RL Execution

arXiv:2606.20014v1 Announce Type: cross Abstract: Reinforcement learning (RL) has achieved strong performance in sequential decision-making, yet scaling to complex multi-agent environments remains challenging due to sparse rewards, large state-action spaces, and the difficulty of learning coordinated strategies. We propose a hierarchical architecture where a pretrained large language model (LLM) acts as a centralized strategic controller that selects among specialized RL skill policies for a team of agents, while RL policies handle reactive low-level execution. We evaluate this hybrid system in a competitive 2v2 King of the Hill environment against behavior tree (BT) and ``Flat'' RL (end-to-end training without skill decomposition) baselines. The LLM+RL system achieves task performance statistically equivalent to hand-crafted BT (46.4\% vs 51.5\% win rate, $p=0.103$) while both significantly outperform Flat RL trained without skill decomposition. A user study ($n=15$) reveals that 60\% of participants perceive LLM+RL agents as the most human-like ($p=0.027$), citing behavioral adaptability and tactical variability. These results demonstrate that pretrained LLM reasoning can effectively orchestrate pretrained RL skills, achieving competitive multi-agent coordination and superior perceived believability without manual rule engineering.

08.
arXiv (CS.CL) 2026-06-16

QK-Normed MLA: QK normalization without full key caching

Query-key (QK) normalization stabilizes attention by controlling the scale of queries and keys before the dot product, but is not immediately compatible with Multi-head Latent Attention (MLA). MLA achieves efficient decoding by caching low-dimensional latent states instead of full keys, whereas post-projection QK RMSNorm appears to require the fully projected key for every cached token. We show this apparent incompatibility is an implementation artifact, not an architectural constraint. RMSNorm decomposes into a static affine weight and a dynamic scalar RMS statistic. The static key-side weight can be absorbed into the MLA query-side projection; the dynamic key statistic reduces to one inverse-RMS scalar per token and KV group. The resulting formulation is exactly equivalent to explicit post-projection QK RMSNorm in exact arithmetic and preserves MLA's latent decode path. In our 400M runs trained for up to 100B tokens, QK-Normed MLA achieves lower training loss and better downstream accuracy than QK clipping, while H800 decode benchmarks show less than 2% latency overhead up to 256k context. These results make QK normalization a practical stabilization option for MLA models without requiring full-key caching.

09.
arXiv (quant-ph) 2026-06-16

Encoding parameters by measurement: Forgetting can be better in quantum metrology

arXiv:2512.10541v2 Announce Type: replace Abstract: We introduce quantum parameter estimation with the encoding being via a quantum measurement. We quantify the precision for estimating parameters characterizing a general two-outcome qubit measurement, considering two cases: when the outcomes of the encoding measurement are recorded and when the same are ignored. We find that in a large variety of such estimation scenarios, forgetting the outcomes yields higher precision. We derive a necessary criterion under which remembering the measurement outcomes provides better precision in comparison to the outcome-forgotten strategy. Furthermore, we establish a necessary and sufficient criterion for the simultaneous estimation of multiple parameters encoded by an arbitrary quantum process, including those involving measurements, using qubit probes, and find when the quantum Cramér$-$Rao bound is valid and achievable. For simultaneous estimation of two parameters characterizing the measurement, we find that the achievable quantum Cramér$-$Rao bound can be a valid precision bound only when the measurement direction depends on the parameters of interest.

10.
arXiv (CS.LG) 2026-06-15

Deep Spectral Learning of Embedded Latent Transfer Operators for Stochastic Dynamical Systems

arXiv:2606.14079v1 Announce Type: new Abstract: We propose a spectral learning method for stochastic nonlinear dynamical systems represented with embedded latent transfer operators in deep feature spaces. We instantiate the method as Deep Spectral Encoder (DSE), an operator-based latent state-space model in which a time-invariant neural encoder implements learnable nonlinear feature maps from observations, and these features define Markovian latent states whose temporal evolution and observation mapping are described by the transfer and observation operators, respectively. Functional canonical correlation analysis in a learnable Galerkin-projected feature space provides state coordinates from past and future observations, and the two linear operators are estimated on the state coordinates as ridge-regularized closed-form solutions that coincide with Galerkin projections of the associated covariance operators. On this representation, we generalize sequential Bayesian filtering and Koopman spectral mode decomposition in feature space. Experiments on several scenarios show stable and superior performance with sequential Bayesian filtering and dynamic mode decomposition baselines even under noise and partial observability.

11.
arXiv (CS.CV) 2026-06-17

EgoCS-400K: An Egocentric Gameplay Dataset for World Models

The shift from video generation to interactive world modeling places new demands on data: beyond captioned videos, world models require temporally aligned video-action-language trajectories grounded in the actions, camera motion, states, and events that drive future scene changes. However, such data is difficult to obtain at scale. Web video datasets offer broad visual coverage but lack executable actions and reliable states; robotic datasets provide action and state supervision but are costly and limited in scene diversity; and existing simulators often lack large-scale human-driven interaction trajectories. In this paper, we introduce EgoCS-400K, a large-scale replay-grounded egocentric Counter-Strike dataset for world models, built from public professional CS and CS2 match demos that preserve human gameplay trajectories and enable parsing, replaying, rendering, and temporal alignment. We extract player states, view directions, movements, keyboard/button inputs, view-angle changes, weapon usage, game events, and round-level context, and render clean first-person videos from the same trajectories. EgoCS-400K contains over 400,000 first-person videos and 10,000 hours of gameplay from more than 1,000 matches and 40,000 rounds, covering 13 maps and 10 player viewpoints per round. It supports a range of interactive visual modeling tasks, including action-conditioned future prediction, state- and event-aware scene rollout, replay-grounded captioning, and agent egocentric action understanding. By connecting visual observations with human actions, camera motion, game states, and events at scale, EgoCS-400K serves as a practical bridge between passive web videos, controllable game simulation, and costly real-world embodied data.

12.
arXiv (CS.LG) 2026-06-16

How Much Capacity Does EEG Denoising Need? Ultra-Compact Networks reveal Benchmark Saturation and Metric-Utility Gap

arXiv:2606.08594v2 Announce Type: replace Abstract: Deep learning EEG denoising architectures have scaled from tens of thousands to tens of millions of parameters, yet no prior study has isolated model capacity as the experimental variable or tested whether reconstruction metrics predict downstream neural-signal utility. We address both gaps by fixing architecture, loss, data split, and training recipe while sweeping only channel width from 1.05K to 40.26K parameters in a minimal depthwise-separable convolutional U-Net. Models were evaluated on the EEGDenoiseNet benchmark, cross-dataset BCI transfer tests, controlled baseline retraining, and downstream motor-imagery classification with five decoder families across all nine BCI Competition IV-2a subjects. Reconstruction performance saturated by 3-6.5K parameters, with post-elbow gains of at most 0.015 correlation coefficient per log10-parameter unit. An 8.46M-parameter baseline retrained under the same pipeline matched the 40.26K compact variant on EOG–a 200x parameter gap yielding no advantage–while a Patch-Transformer control reproduced the same diminishing-return shape. Downstream evaluation exposed a classifier-dependent metric-utility gap: reconstruction-optimized denoising significantly degraded CSP+LDA classification across all nine subjects and three artifact types (best denoised accuracy 0.547 vs. 0.612 noisy baseline; Bonferroni p=0.0488), persisting on naturally recorded trials (Delta=-0.047; BH-FDR q=0.0049). End-to-end neural decoders showed variable or neutral effects. Standard EEG denoising benchmarks are saturated far below current model capacity, and reconstruction metrics do not predict BCI utility. Ultra-compact models at 33-46 KB and 1.27-2.61M FLOPs/segment are practical for edge deployment. These findings argue for capacity-controlled evaluation, harder task-aware benchmarks, and mandatory downstream validation.

13.
arXiv (CS.CV) 2026-06-15

Instruct-Particulate: Scaling Feed-Forward 3D Object Articulation with Kinematic Control

Reconstructing articulated 3D objects is important for animation, gaming, and robotic simulations. Recent neural networks can estimate the articulated structure of 3D objects, but their generalization remains limited by the scarcity of annotated data for this task. To address this gap, we introduce Instruct-Particulate, a model that takes a 3D mesh together with a target kinematic specification, including part descriptions, connectivity, joint types, and optional point prompts, and predicts the corresponding kinematic part segmentation and joint motion parameters. The kinematic specification disambiguates the task and allows the model to target annotations of different granularity, thereby making it possible to use more abundant heterogeneous training data. At test time, the kinematic specification can be obtained automatically from large-scale vision-language models, so the model can be applied to any input mesh. To train our model at scale, we construct a heterogeneous dataset of more than 150,000 articulated 3D objects, extending existing publicly available collections with data obtained by partially labelling other 3D models (monolithic or already decomposed into parts) with kinematic labels by means of vision-language models. Experiments show that our model generalizes better across categories and to AI-generated meshes, enabling articulated asset reconstruction from real-world images via image-to-3D models.

14.
arXiv (CS.AI) 2026-06-16

A Unified Causal-Origin Taxonomy of Distributional Shifts in Reinforcement Learning

arXiv:2606.16933v1 Announce Type: cross Abstract: Reinforcement learning (RL) systems often degrade when operating conditions differ from those previously encountered, reflecting distributional shifts in the underlying data-generating process. Such shifts may occur between training and evaluation, as in In-Distribution (ID) and Out-of-Distribution (OOD) generalization, or within non-stationary settings where environment dynamics evolve over time. However, the formal relationship between these views remains unclear, and existing work mainly focuses on mitigation rather than the causal origin of shift within the agent-environment interaction. This work develops a unified causal-origin taxonomy that characterizes sources of distributional shift in RL and relates ID/OOD generalization to non-stationary settings. We transfer the classical dataset-shift principle from supervised learning to RL by reformulating distributional shift in terms of the generative interaction process. Using a Partially Observable Markov Decision Process (POMDP), we decompose the interaction into structural components, including the state distribution, observation process, policy, reward, and transition dynamics, together with the shifted-time boundary. The proposed taxonomy distinguishes internal, agent-driven, and external, environment-driven, distributional shifts. The shifted-time boundary perspective further characterizes explicit, implicit, and hybrid shifts. This formulation unifies ID/OOD generalization and non-stationarity as structured changes in the underlying process. We also introduce an evaluation framework for measuring shift impact and adaptation through performance degradation and recovery metrics. By grounding distributional shift in the causal-origin structure of RL, this work supports systematic analysis of robustness under distributional shift.

15.
arXiv (CS.LG) 2026-06-17

Clarify Before You Draw: Proactive Agents for Robust Text-to-CAD Generation

arXiv:2602.03045v2 Announce Type: replace Abstract: Large language models have recently enabled text-to-CAD systems that synthesize parametric CAD programs (e.g., CadQuery) from natural-language prompts. In practice, however, geometric descriptions can be under-specified or internally inconsistent: critical dimensions may be missing and constraints may conflict. However, existing fine-tuned models tend to reactively follow the user instructions and hallucinate dimensions when the text is ambiguous. To address this, we propose a proactive agentic framework for text-to-CadQuery generation, named as ProCAD, that resolves specification issues before code synthesis. Our framework pairs a proactive clarifying agent, which audits the prompt and asks targeted clarification questions only when necessary to produce a self-consistent specification, with a CAD coding agent that translates the specification into an executable CadQuery program. We fine-tune the coding agent based on a curated high-quality text-to-CadQuery dataset and train the clarifying agent via agentic SFT on clarification trajectories. Experiments show that proactive clarification significantly improves robustness to ambiguous prompts while keeping interaction overhead low. ProCAD outperforms frontier closed-source models, including Claude Sonnet 4.5, reducing the mean Chamfer distance by 79.9% and lowering the invalidity ratio from 4.8% to 0.9%. Our code and datasets are made publicly available on https://github.com/BoYuanVisionary/Pro-CAD.

16.
arXiv (CS.AI) 2026-06-16

HAMON: Passive Optical Sequence Mixing for Long-Horizon Forecasting

arXiv:2606.17028v1 Announce Type: cross Abstract: Simple linear and frequency-domain models remain surprisingly competitive in long-horizon time-series forecasting, and recent mechanistic evidence suggests that standard forecasting benchmarks may not require the dense superposed representations that make transformers powerful in other domains. This raises a substrate-level question: if the core forecasting operator is often low-complexity and approximately linear, does it need to be implemented as learned digital temporal mixing? We introduce HAMON, a passive diffractive optical forecasting core in which historical values are encoded onto an optical aperture, future positions are left dark, and cascaded trainable phase masks with free-space diffraction shape the forecast directly in the output field. At inference, prediction is performed by a single passive optical propagation pass with no trainable digital sequence-mixing layer. Across standard benchmarks, HAMON outperforms the strongest digital baselines considered on ETTm2 at all horizons and on ETTh2 at all but the longest horizon, improving MSE by up to 14\% and doing so consistently across horizons rather than at isolated points. It is competitive on Weather and trails the strongest baselines on the remaining ETT settings and on the high-channel-count Traffic and Electricity datasets. Phase encoding, intensity-compatible readout, and phase-scrambling ablations, together with a TorchOptics cross-simulator check, indicate that the forecasts arise from the data-bearing optical field rather than from a digital forecasting head. Because the passive core uses standard Fourier optics, HAMON defines a concrete target for optical hardware and for passive physical sequence mixing.

17.
arXiv (CS.CL) 2026-06-16

SING: Synthetic Intention Graph for Scalable Active Tool Discovery in LLM Agents

Large language model (LLM) agents increasingly rely on agent harnesses that manage context, tools, and multi-turn execution, making tools a central interface for acting in realistic digital environments. As harness-connected tool ecosystems expand to hundreds or thousands of APIs, services, and task-specific skills, exhaustive tool schema injection becomes costly and imposes a closed-world assumption that limits agents to a predefined static inventory. Retrieval-augmented tool selection offers a natural alternative, but existing one-shot retrieval methods often fail to align isolated tool descriptions with the agent's true task intention, especially in long-horizon tasks where required capabilities emerge through decomposition, observations, and newly induced subgoals. We propose SING, an intention-aware active tool discovery framework that builds an intention-tool graph linking user intentions, tool capabilities, and tool collaboration patterns, and dynamically retrieves tools according to evolving task states. Using a unified corpus of 7,471 tools, we evaluate SING on three real-world tool-use benchmarks. SING improves Global Recall@5 by up to 59.8% and downstream success rate by up to 28.9% over baselines, while reducing full-corpus tool-schema exposure by 99.8%, demonstrating that intention-aware graph structure enables more accurate and context-efficient tool discovery in large-scale agentic ecosystems.

18.
arXiv (CS.LG) 2026-06-17

From Theory to Application: A Practical Introduction to Neural Operators in Scientific Computing

arXiv:2503.05598v2 Announce Type: replace-cross Abstract: This review examines neural operator architectures for learning solution operators of parametric partial differential equations (PDEs), with an emphasis on conceptual clarity and practical implementation. The work analyzes key models, including DeepONet, PCANet, and the Fourier Neural Operator, highlighting their underlying representations, computational structures, and comparative performance. These architectures are demonstrated on three canonical PDE problems: the Poisson equation, a linear elasticity problem, and a hyperelasticity problem. To make the presentation self-contained, key foundational topics are introduced, including finite-dimensional representations of function spaces, singular-value decomposition, and sampling from infinite-dimensional function spaces. Beyond forward modeling, the review discusses the use of neural operators as surrogate models within a Bayesian inverse-problem framework, including prior specification, forward-map approximation, and posterior computation. The performance of the three neural-operator architectures is evaluated on in-distribution samples, out-of-distribution samples, and Bayesian inference tasks. The review also discusses challenges related to prediction accuracy and generalization, outlining emerging strategies such as residual-based error correction and multi-level training. The review concludes by positioning neural operators within broader scientific-computing workflows and by identifying directions for reliable, scalable operator learning.

19.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

21.
arXiv (CS.AI) 2026-06-15

Securing the Future of IoMT in the Post-Quantum Era: An Edge-Native Federated Learning Approach

arXiv:2606.14515v1 Announce Type: cross Abstract: Internet of Medical Things (IoMT) devices operate under strict resource constraints while handling highly sensitive health data, making security and privacy critical concerns. Federated learning (FL) further complicates this landscape, as model updates exchanged during training may unintentionally expose private medical information. Emerging quantum computing capabilities threaten the long-term viability of conventional lightweight cryptographic mechanisms, motivating the integration of Post-Quantum Cryptography (PQC) into IoMT systems. This article discusses key enabling technologies for quantum-resilient IoMT, including post-quantum key establishment, lightweight encryption, and edge-native orchestration. We propose a scalable Kubernetes-based framework that integrates PQC into FL-enabled IoMT environments and validate it on a Raspberry Pi testbed. Results demonstrate that distributed cryptographic processing significantly reduces latency compared to sequential designs while maintaining feasible resource overhead. The primary contribution of this work lies in the design and validation of a secure orchestration and communication framework for FL-enabled IoMT systems. We conclude by outlining future directions toward energy-aware architectures, intelligent security optimization, and resilient next-generation Intelligent Internet of Medical Things (IIoMT) ecosystems.

22.
arXiv (CS.CV) 2026-06-19

Relighting as a Probe of Visual Priors via Augmented Latent Intrinsics

Image-to-image relighting requires representations that separate illumination from scene properties while preserving dense geometry, material, and photometric cues. We use this task as a probe of visual priors: unlike recognition tasks that reward invariance, relighting tests whether visual features retain the information needed for light transfer. Through a controlled generative relighting framework, we find that strong semantic encoders can degrade relighting quality, exposing a semantic–photometric trade-off between abstraction and physical fidelity. We introduce Augmented Latent Intrinsics (ALI), which balances this trade-off by fusing dense, pixel-aligned visual features into a latent-intrinsic relighting model and refining it with self-supervision on unlabeled real image pairs. ALI improves relighting quality, especially on glossy, metallic, and transparent materials, and demonstrates that generative relighting is an effective tool for quantifying what visual encoders encode about the physical world.

23.
arXiv (CS.CV) 2026-06-16

Beyond Self-Attention: Sub-Quadratic Vision Transformers for Fast Image Captioning

Image captioning is a challenging and significant task that aims to generate coherent and semantically meaningful textual descriptions for given images. To accomplish this task, it requires a deep understanding of visual content along with the ability to express that understanding in natural language. Despite remarkable progress with transformer-based architectures, existing approaches often suffer from limitations, such as a lack of rich local feature representations and the high computational cost of quadratic self-attention. The proposed model focuses on improving computational efficiency by restructuring the vision transformer architecture. In designing this approach, the standard self-attention mechanism in Vision Transformers is replaced with a probabilistic transformer approach based on a Gaussian Mixture Model (GMM), a soft-clustering technique. Instead of computing pairwise attention among all image patches, the model groups similar patches into a fixed number of clusters using an Expectation-Maximization (EM) algorithm. This clustering-based mechanism reduces the computational complexity from quadratic O(n^2) to linear O(nK), where K

24.
arXiv (CS.AI) 2026-06-18

Searching for Synergy in Shared Workspace Human-AI Collaboration

arXiv:2606.18413v1 Announce Type: new Abstract: Automated AI agents are increasingly capable, yet many scientific and professional tasks require human judgment and contextual expertise. We study shared-workspace human-AI teams, where AI agents and human collaborators must coordinate responsibilities before submitting a final answer. Using the Collaborative Gym environment with DiscoveryBench tasks, we examine when adding simulated human collaborators improves performance and when process loss turns additional collaborators into coordination overhead. Across 1,482 sessions, adding relevant collaborators can lower performance when teams lack structure to coordinate their contributions. We then evaluate scaffolding that combines shared group memory with simulated human-in-the-loop (HITL) gates, where selected actions require approval from a designated simulated participant. This scaffolding yields higher mean performance, most clearly in three-person teams, with clearer responsibility signals and stronger routing of expertise to team actions. Overall, how human-AI teams coordinate and integrate expertise matters as much as the capability available to them.

25.
arXiv (CS.CV) 2026-06-16

FusionRS: A Large-Scale RGB-Infrared Remote Sensing Dataset for Dual-Modal Vision-Language Foundation Models

Remote sensing vision-language models have advanced Earth observation understanding, but most existing work remains centered on RGB imagery, leaving the complementary information in infrared data underexplored. Infrared images provide distinctive cues, including thermal intensity structures, object boundaries, and illumination-invariant scene features, which can enrich visual-language learning beyond conventional RGB observations. However, a large-scale RGB-infrared-text dataset for remote sensing vision-language modeling is still absent. To address this gap, we introduce FusionRS, the first large-scale RGB-infrared-text dataset designed for dual-modal vision-language learning in remote sensing. FusionRS is constructed by translating diverse public RGB remote sensing images into infrared-style counterparts, forming aligned RGB-IR image pairs. Each pair is associated with conventional scene captions and IR-aware captions that explicitly describe infrared-specific visual properties while preserving semantic content. Based on FusionRS, we train dual-modal vision-language foundation models for RGB-IR joint understanding. We first train CLIP-style models for RGB-IR-text alignment, and then fine-tune generative VLMs for dual-modal RGB-IR captioning. Experiments show that FusionRS improves RGB-IR alignment, infrared-to-text retrieval, and dual-modal captioning over RGB-only and non-IR-aware training settings. Ablation studies further verify that IR-aware captions are crucial for strengthening infrared-language alignment, highlighting the importance of modality-specific textual supervision for more scalable RGB-infrared remote sensing vision-language representation learning.