Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-17

Deep learning for interactive and automated inner retinal layer segmentation in OCT images of patients with retinitis pigmentosa using limited training data

Purpose: New therapeutic strategies such as optogenetics have created a need for accurate tracking of inner retina degeneration in Retinitis pigmentosa (RP) patients. We introduce two tailored deep learning models to segment the RNFL (retinal nerve fibre layer), GCIPL (ganglion cell inner plexiform layer), INL (inner nuclear layer), CFT (central foveal thickness) and RPE (retinal pigment epithelium) in RP: The first is based on a Segment Anything Model (SAM), the second on nnU-Net. To our knowledge, SAM has not yet been applied to retinal layers in OCT data. Methods: SD-OCT images of a retrospective cohort of 37 RP patients were included. Data for four training cycles were prepared semi-automatically in MATLAB, then assessed and corrected by three expert graders. 1,700 segmented B-Scans from two open datasets were used for pretraining. For post-processing, semantic retinal boundary detection was developed. The final models, OCT-SAM and nnU-Net, were trained on 228 annotated RP scans. Detected layer thicknesses were validated against manual segmentation at 90 random points in 30 OCT B-Scans. Finally, OCT-SAM was tested on three RP cases with retrospective, longitudinal OCT data. Results: nnU-Net achieved a precision, recall and F-1 score of 0.96 while OCT-SAM performance resulted in slightly lower values of 0.93, 0.8 and 0.85, respectively. OCT-SAM measurements had low bias and good agreement with manual annotations, confirming reliability. Conclusions: OCT-SAM enabled fast data annotation and tool integration, whereas nnU-Net provided the best segmentation performance. OCT-SAM demonstrated longitudinal reproducibility and detected RP-characteristic pathologies and degenerative changes. Future work will extend OCT-SAM to 3D OCT segmentation.

02.
arXiv (CS.CV) 2026-06-16

Towards Next-Generation Healthcare: A Survey of Medical Embodied AI for Perception, Decision-Making, and Action

Foundation models have demonstrated impressive performance in enhancing healthcare efficiency across a wide range of medical applications. Nevertheless, their limited ability to perceive, understand, and interact with the physical world significantly constrains their effectiveness in real-world clinical workflows, where safety-critical decision-making and physical execution are tightly coupled. Recently, embodied artificial intelligence (AI) has emerged as a promising physical-interactive paradigm for intelligent healthcare, enabling agents to operate in complex medical environments. As research in this area rapidly expands, understanding how intelligent agents function as integrated, end-to-end systems in clinical environments becomes increasingly critical. However, existing surveys on medical embodied AI largely emphasize individual aspects or functional components, lacking a unified system-level organization of the field. To support and consolidate recent advances, we systematically survey the core components of medical embodied AI, with a particular emphasis on the coordinated integration of perception, decision-making, and action. We further review representative medical applications and relevant datasets, and we analyze the major challenges encountered in real-world clinical practice. Finally, we discuss key directions for future research in this rapidly evolving field. The associated project can be found at https://github.com/VMVLab/Medical_Embodied_AI_Paper_List.

03.
arXiv (CS.AI) 2026-06-17

LLM-Aided Joint Secrecy Precoding and Trajectory for RSMA-Based Heterogeneous UAV Networks

arXiv:2507.17188v3 Announce Type: replace-cross Abstract: This paper investigates secure communications in rate-splitting multiple access (RSMA) enabled heterogeneous UAV networks, where multiple UAVs collaboratively serve ground terminals in the presence of eavesdroppers. By jointly considering secrecy rate maximization and propulsion energy consumption minimization, we formulate a multi-objective optimization problem involving UAV trajectory design, service association, power allocation, and secrecy precoding under mobility, collision-avoidance, service-capacity, and communication constraints. The formulated problem is highly non-convex due to the coupling among UAV trajectories, RSMA transmission variables, and secrecy constraints.To address the resulting non-convex and highly coupled optimization problem, we propose a hierarchical optimization framework. The inner layer uses a semidefinite relaxation (SDR)-based S2DC algorithm combining penalty functions and difference-of-convex (D.C.) programming to solve the secrecy precoding problem with fixed UAV positions. The outer layer introduces a Large Language Model (LLM)-guided heuristic multi-agent reinforcement learning approach (LLM-HeMARL) for trajectory optimization. LLM-HeMARL efficiently incorporates LLM-generated expert heuristic policy, enabling UAVs to learn energy-aware, security-driven trajectories without the inference overhead of real-time LLM calls. The simulation results show that our method outperforms existing baselines in secrecy rate and energy efficiency, with consistent robustness across varying UAV swarm sizes and random seeds.

04.
arXiv (CS.AI) 2026-06-17

Cluster-Aware Dual-Level Test Specification Generation for Large-Scale Automotive Software Requirements

arXiv:2606.17197v1 Announce Type: cross Abstract: Generating test specifications that satisfy Automotive SPICE SWE.6 requirements becomes increasingly challenging and time-consuming as projects scale to thousands of requirements. Because this manual process often consumes weeks of engineering effort, automation becomes a critical necessity. However, standard Large Language Model (LLM) approaches struggle at scale: processing requirements individually discards vital inter-requirement dependencies, while feeding entire corpora at once exceeds context-window limits, leading to incomplete integration coverage and redundant test cases. This paper presents a novel "Cluster-then-Summarize" pipeline that addresses these limitations through three-stages. Requirements are embedded using sentence transformers and grouped using UMAP dimensionality reduction followed by HDBSCAN density-based clustering. This grouping utilizes an automatic minimum cluster size selection driven by a quality criterion combining normalized Silhouette and Calinski-Harabasz scores. A multi-level map-reduce summarization algorithm then distills each cluster into concise, domain-conformant descriptions while preserving quantitative thresholds and safety integrity levels. The pipeline exploits the derived cluster topology to generate test specifications at two levels: individual requirement verification and cluster-level integration tests that verify cross-requirement feature behavior. A nearby-cluster context mechanism provides bounded cross-feature awareness during each LLM call, and Retrieval-Augmented Generation grounds all outputs in ISO 26262 and ASPICE standards. Evaluation on automotive requirement datasets of varying scale demonstrates that the cluster-aware approach improves integration test coverage and maintains summarization fidelity compared to baseline methods while scaling efficiently to thousands of requirements.

05.
arXiv (CS.CV) 2026-06-17

High-Fidelity 3D Geometric Reconstruction of Pelvic Organs from MRI: A Hybrid Deep Learning and Iterative Optimization Approach

Patient-specific 3D reconstruction of pelvic organ geometry from MRI is important for pelvic floor modeling and downstream patient-specific analysis. However, while previous studies have focused primarily on either image segmentation or downstream use of 3D models, the reconstruction of high-fidelity, high-quality geometries remains labor-intensive and poorly standardized. The study introduced a hybrid deformable shape modeling framework that integrates deep learning prediction with iterative optimization for the reconstruction of the bladder, uterus, and rectum. The framework consists of three core components: a geometry-aware multi-level deep learning architecture that preserves topological consistency of pelvic organs; a two-stage amortized optimization training strategy that balances global shape capture and local surface refinement; and a holistic synergy mechanism–where iterative optimization provides supervision for deep learning during the training phase, and during inference, deep learning rapidly predicts the global organ morphology, followed by iterative optimization to refine local surfaces and mesh quality. This framework demonstrated marked superiority in geometric fidelity than current mainstream deep learning-based organ reconstruction models. For individual anatomical structures, the reconstructed 3D geometries for the bladder, rectum, and uterus achieved significantly lower Chamfer Distance values and higher Dice Similarity Coefficient scores. In addition, while maintaining high computational efficiency, the proposed architecture yielded superior overall volumetric mesh quality. At the patient level, the framework achieved higher mean values for the 10 worst elements for both minSICN and minSIGE compared to traditional geometric post-processing algorithms.

06.
arXiv (CS.CV) 2026-06-18

Epipolar Geometry Improves Video Generation Models

Video generation models have advanced significantly through the latent diffusion transformers trained with rectified flow techniques. Yet these models still struggle with geometric inconsistencies, unstable motion, and visual artifacts that break the illusion of realistic 3D scenes. 3D-consistent video generation could significantly impact numerous downstream applications in generation and reconstruction tasks. We explore how epipolar geometry constraints improve modern video diffusion models. Despite using massive training data, these models fail to capture fundamental geometric principles. We align diffusion models using pairwise epipolar geometry constraints via preference-based optimization, directly addressing unstable trajectories and geometric artifacts through mathematically principled geometric enforcement. Our approach efficiently enforces geometric principles without requiring end-to-end differentiability. Evaluation demonstrates that classical geometric constraints provide more stable optimization signals than modern learned metrics. Training on static scenes with dynamic cameras ensures metric quality while the model generalizes to various dynamic scenes. By bridging data-driven learning with classical computer vision, we reduce epipolar error by 31% and improve human-rated consistency from 54% to 72% without compromising visual quality.

07.
arXiv (CS.AI) 2026-06-18

User as Engram: Internalizing Per-User Memory as Local Parametric Edits

作者:

arXiv:2606.19172v1 Announce Type: new Abstract: Personal memory in a language model is two problems: content and reasoning skill. The brain keeps the two apart (a sparse, local engram in the hippocampus for each episode, a slow neocortex for the shared skills that interpret it), so a new fact need not overwrite everything else. Most personalization today keeps a user's facts outside the weights, in a natural-language memory file or a retrieval index. When facts are written into the model instead, the standard recipe is the per-user LoRA adapter, which does the opposite of the brain, folding content and skill into one global weight delta. Writing a user's facts as a LoRA contaminates text unrelated to them; writing the same facts as local Engram rows leaves it mathematically untouched, resulting in a roughly 33,000x smaller memory footprint. We therefore propose User as Engram: store a user's content as surgical edits to the hash-keyed memory table of an Engram model, and carry the reasoning skill in one shared adapter. This layered design matches per-user LoRA's direct recall while delivering 5.6x higher indirect-reasoning accuracy on average, and never makes a single user worse at reasoning than the untouched base. The edit is a glass box: writing a fact switches on its lookup at exactly the trigger, adds the value the answer needs, leaves every other position unchanged to the last bit, and fails if written into the wrong layer. Because different users' facts land in disjoint hash slots, their edits compose: many users live in one shared table at once, stacking additively and losslessly, where a per-user LoRA, a single global weight delta, admits only one. Upon retrieval, a per-user Engram table does not grow with the population the retriever must search, so past ~100 facts it overtakes a retrieval pipeline on a 2.5x larger model.

08.
arXiv (CS.CV) 2026-06-19

VideoSketcher: Sequential Sketch Generation Using Video Model Priors

Sketching is inherently sequential: strokes are drawn progressively to explore and refine ideas. Yet most generative approaches treat sketches as static images, ignoring the temporal process underlying creative exploration. Modeling this sequential structure remains challenging: prior methods either rely on large-scale human-drawn datasets with limited diversity, or use large language models (LLMs) to produce drawing instructions, often at the cost of visual fidelity. We present VideoSketcher, a method for generating high-quality sketching processes by adapting pretrained text-to-video diffusion models to the sparse, continuous nature of sketch formation. Our key insight is that LLMs and video diffusion models offer complementary strengths: LLMs act as semantic planners that decompose concepts into step-by-step instructions, while video diffusion models serve as powerful "renderers" that translate them into temporally coherent sketch sequences. We introduce a two-stage fine-tuning strategy that decouples temporal structure from visual appearance: stroke ordering is learned from synthetic shape compositions, while style is distilled from as few as seven hand-drawn examples. Despite minimal supervision, our method can generate diverse, high-quality sequential sketches that faithfully follow specified drawing orders. Our framework naturally extends to brush style control and autoregressive generation, supporting artistic applications.

10.
arXiv (CS.CV) 2026-06-17

SCC-Loc: A Unified Semantic Cascade Consensus Framework for UAV Thermal Geo-Localization

Cross-modal Thermal Geo-localization (TG) provides a robust, all-weather solution for Unmanned Aerial Vehicles (UAVs) in Global Navigation Satellite System (GNSS)-denied environments. However, profound thermal-visible modality gaps introduce severe feature ambiguity, systematically corrupting conventional coarse-to-fine registration. To dismantle this bottleneck, we propose SCC-Loc, a unified Semantic-Cascade-Consensus localization framework. By sharing a single DINOv2 backbone across global retrieval and MINIMA$_{RoMa}$ matching, it minimizes memory footprint and achieves zero-shot, highly accurate absolute position estimation. Specifically, we tackle modality ambiguity by introducing three cohesive components. First, we design the Semantic-Guided Viewport Alignment (SGVA) module to adaptively optimize satellite crop regions, effectively correcting initial spatial deviations. Second, we develop the Cascaded Spatial-Adaptive Texture-Structure Filtering (C-SATSF) mechanism to explicitly enforce geometric consistency, thereby eradicating dense cross-modal outliers. Finally, we propose the Consensus-Driven Reliability-Aware Position Selection (CD-RAPS) strategy to derive the optimal solution through a synergy of physically constrained pose optimization. To address data scarcity, we construct Thermal-UAV, a comprehensive dataset providing 11,890 diverse thermal queries referenced against a large-scale satellite ortho-photo and corresponding spatially aligned Digital Surface Model (DSM). Extensive experiments demonstrate that SCC-Loc establishes a new state-of-the-art, suppressing the mean localization error to 9.37 m and providing a 7.6-fold accuracy improvement within a strict 5-m threshold over the strongest baseline. Code and dataset are available at https://github.com/FloralHercules/SCC-Loc.

11.
arXiv (CS.AI) 2026-06-19

Speeding up the annotation process in semantic segmentation industrial applications

arXiv:2606.19934v1 Announce Type: cross Abstract: Current machine learning models commonly require large and well-annotated datasets. However, the annotation process often becomes a bottleneck, with increased complexity leading to higher chances of human errors. Within this context, our goal in this paper is to leverage unsupervised algorithms to improve data annotation efficiency for complex semantic segmentation problems in industrial materials science. Previous research has quantified labeling time and others explored unsupervised methods. However, to the best of our knowledge, this is the first study to quantify how much unsupervised algorithms accelerate the labeling process. We aim to validate the extent to which this laborious process can be accelerated, focusing on semantic segmentation tasks that involve annotating each pixel of high-resolution images, such as the microstructure characterization challenge in materials science. Specifically, we demonstrate that by using unsupervised computer vision algorithms, the time required for the labeling process can be reduced from 170 hours to 37 hours, achieving an approximate reduction of 78\%. The dataset we work with includes large images of dimensions 1280x959 and 960x703, which further increases the complexity of the annotation task. Despite these challenges, we create and share the largest public steel microstructure segmentation dataset to date, available under MIT License with permanent DOI, contributing a fully annotated, high-resolution dataset to the field. Additionally, this is the first work to compare the labeling time from scratch (a common approach in previous studies) to the labeling time when using these unsupervised algorithms as a pre-annotation step. Furthermore, we provide a Deep Learning model trained on this dataset, validated by field experts, and deployed in an industrial setting, serving as an initial benchmark for this public dataset.

12.
arXiv (math.PR) 2026-06-17

Cutoff for asymmetric shelf shuffle

arXiv:2606.18039v1 Announce Type: new Abstract: A mechanical shuffler consists of $m$ shelves. A deck of $n$ cards, arranged in increasing order, is dealt from the bottom sequentially. Each card is assigned a shelf uniformly at random and placed on the top (bottom) of the existing pile with probability $p$ ($1-p$) independently. We refer to this as asymmetric shelf-shuffle. We find the law $\nu_{n, m}^{(p)}$ of the permutation induced by the asymmetric shelf-shuffle and show that the pair consisting of the number of descents and the number of valleys is a sufficient statistic. This generalizes a result of Diaconis, Fulman, and Holmes (Ann. Appl. Prob., 2013) corresponding to the case $p=1/2$. For $p=1/2$, Chen and Ottolini (ECP, 2025) established the cutoff in the total variation distance near $\lfloor n^{5/4}\rfloor$. We establish the cutoff for the asymmetric shelf shuffle. Let $\nu_n$ be the uniform measure on the set of all permutations $S_n$ of $\{1, \ldots, n\}$. For a fixed $p\neq 1/2$ and $c>0$, we show that \[\operatorname{TV}\left(\nu_{n, \lfloor cn^{3/2}\rfloor }^{(p)}, \nu_n\right)=1-2\Phi\left(-\frac{|2p-1|}{4\sqrt{3}c}\right)+O_{c, p}(n^{-1/2})\;.\] We also establish the cutoff in the separation distance near $m\approx n^{2}$ and in the relative entropy near $m=n^{3/2}$. In both cases, we also obtain the cutoff profile explicitly.

13.
arXiv (CS.AI) 2026-06-11

AutoMine Solution for AV2 2026 Scenario Mining Challenge

arXiv:2606.11874v1 Announce Type: new Abstract: With the development of autonomous driving systems, mining high-value, safety-critical, and planning-relevant scenarios from large-scale driving logs has become essential for data-driven evaluation. In this paper, we propose AutoMine, a robust self-refining scenario mining method based on LLMs and VLMs. AutoMine uses semantics-preserving prompt augmentation to reduce LLM prompt sensitivity, combines robust trajectory atomic functions with VLM-based functions to handle perception noise and open-world visual cues, and refines generated code through execution feedback from real logs. In the Argoverse 2 Scenario Mining Competition at CVPR 2026, AutoMine achieves a HOTA-Temporal score of 36.38 and a Timestamp BA score of 77.21.

14.
arXiv (CS.CV) 2026-06-18

Automatic ply-specific analyses of CFRP micrographs using shortest-path-based ply distinction

We present an automated approach to distinguish between ply instances in semantic segmentation masks of high-resolution carbon-fiber reinforced polymer micrographs. Interpreting the segmentation mask as a graph with pixels as vertices, enables us to use a shortest-path algorithm yielding the ply-separating paths. Thereby, we bridge the gap between semantic segmentation and ply instance segmentation using global information. We successfully apply our approach on high-resolution micrographs featuring a broad range of characteristics like artificially added gaps in single or multiple plies, different stacking sequences and ply traversing cracks. Assigning each fiber pixel to a ply based on the calculated paths, allows for a comprehensive, quantitative ply analysis with respect to its microstructural properties like the local fiber volume fraction as well as locally resolved ply and interleaf layer thickness. These insights help to reveal manufacturing-induced inhomogeneities, draw conclusions on manufacturing parameters and link mechanical properties to underlying microstructural imperfections.

15.
arXiv (CS.LG) 2026-06-18

Mixed-Precision Communication-Avoiding SGD for Generalized Linear Models on GPUs

arXiv:2606.18463v1 Announce Type: cross Abstract: Distributed stochastic gradient descent (SGD) is limited by communication rather than computation, since each iteration requires an AllReduce across processes. Communication-avoiding SGD (CA-SGD) amortizes communication over $s$ iterations by replacing $s$ consecutive AllReduces with a single AllReduce of an $sb\times sb$ Gram matrix, trading more computation and bandwidth for fewer synchronization points. Modern GPUs with matrix hardware and reduced-precision formats offset this by accelerating the Gram GEMM and shrinking BF16 traffic. We study mixed-precision CA-SGD for generalized linear models on NVIDIA GPUs. Our finite-precision analysis decomposes the local rounding error of one CA-SGD outer iteration into nine independent precision choices, depending on the hardware only through its low-precision unit roundoffs, so the resulting recipes transfer in principle across GPU generations. The recipe stores the input matrix and margin vector in low precision, computes the Gram matrix from low-precision inputs with high-precision accumulation, communicates it in high precision, and performs the inner recurrence and weight updates in high precision. On NERSC Perlmutter A100 GPUs, mixed-precision CA-SGD matches FP32 SGD loss within $0.5\%$ on logistic, linear, and Poisson problems and reaches $5.1$–$6.8\times$ speedup over FP32 SGD on epsilon, SUSY, HIGGS, synth, and Poisson-synth. Our software is available at https://doi.org/10.5281/zenodo.20448273

17.
arXiv (CS.LG) 2026-06-15

Where Black-box Drug-Target Interaction Prediction Models Look: Cross-Method Explainability

arXiv:2606.14245v1 Announce Type: new Abstract: Drug-target interaction (DTI) and affinity (DTA) predictors increasingly achieve strong benchmark scores, yet their internal use of sequence, fingerprint, and graph features often remains opaque. We present an interpretability audit of BridgeDPI architecture on three different datasets including Gao, Human, and C.elegans. This study combines gradient-based attributions – integrated gradients, saliency, layer-wise relevance propagation, SmoothGrad, and SmoothGrad-IG – with feature-wise occlusion ablation and strict intersection consensus across methods to reduce single-explainer bias. We summarize sensitivity and signed effects at raw inputs, at the bridge similarity scaffold, and through the graph convolution, including edge-level sensitivities and targeted edge removals. The results show that explainability is most informative when treated as model criticism: it reveals modality dominance, padding and special-token artifacts, dataset-dependent cooperative versus suppressive effects across layers, and chemistry-consistent fragment and composition motifs where methods agree. These analyses do not substitute for structural or experimental ground truth, yet they can provide testable hypotheses for downstream validation in computational drug discovery pipelines. More broadly, applying modern XAI to contemporary DTI/DTA models is still an early pass over the rich structure implicit in trained weights and data – yet even this first layer of scrutiny already helps researchers relate predictions to drug- and target-side representations and to prioritize external validation.

18.
arXiv (CS.CV) 2026-06-15

Hierarchical Consistency Learning for Test-time Adaptation in Camouflage Perception

Camouflaged object detection (COD) aims to localize targets that exhibit minimal perceptual differences from backgrounds through physical attributes. Existing methods, constrained by the static train-then-freeze paradigm, suffer from domain rigidity and annotation dependency, limiting their adaptability to scene variations and unseen camouflage patterns. To overcome these, we propose the hierarchical consistency learning (HCL) framework, which integrates test-time adaptation for dynamic representation recalibration. Specifically, we design the hierarchical representation reconstruction (HRR) to alleviate feature entanglement by synergizing spatial reconstruction with dual-stream frequency-domain decomposition, enhancing robustness against appearance homogenization. The pixel and spectrum inference provide structural and contextual priors. We further introduce task affinity guidance (TAG) to propagate knowledge across branches via channel-wise affinity, aligning local discriminative cues and mitigating semantic drift. To ensure semantic invariance, we formulate the prototype consistency calibration (PCC), which aggregates region features into compact prototypes and establishes prototype-feature similarity. This imposes implicit and hierarchical constraints that bridge task and representation gaps. Extensive experiments across four camouflaged and four underwater object benchmarks, under three degradation settings, demonstrate that our method consistently outperforms state-of-the-art approaches, highlighting its robustness and generalization under distribution shifts.

19.
medRxiv (Medicine) 2026-06-15

Filum Terminale Diameter on Routine Pediatric MRI: A Large-Cohort Clinical Reference in 3,406 Children and the Age-Dependent Meaning of the 2-mm Thickened-Filum Threshold

Background. A filum diameter >2 mm is the conventional MRI threshold for a thickened filum, but it derives from small, mostly adult series showing no age dependence; whether one cutoff suits all of childhood is untested. Objective. To build an age-specific filum-diameter reference on routine pediatric MRI and test, adjusting for image resolution, whether the 2-mm threshold is age-stationary. Materials and methods. In this retrospective study an nnU-Net tracer measured the maximal filum diameter on consecutive lumbosacral MRI; versus manual tracing it showed negligible bias but moderate single-measure agreement. After excluding report-confirmed fatty filum, lipoma, or tethered cord, the proportion >2 mm was analysed within one acquisition protocol and by logistic regression adjusting for voxel size and slice thickness. Results. Of 7,245 examinations, 3,869 (53%) were traceable; untraced ones were younger (median 0.75 vs 2.0 years). The presumed-normal cohort had median diameter 1.48 mm. At matched resolution, 2 mm marked the 94th percentile in infants (5.6% exceeded it) but the 83rd by 3-6 years (17.4%); the age effect persisted after adjusting for voxel size and slice thickness (3-6 years vs infants, adjusted OR 4.7; P < .001). Conclusion. Filum diameter clusters near 1.5 mm, and the fixed 2-mm cutoff flags ~5% of infants but ~17% of preschoolers. Caliber should be judged against an age-specific clinical reference, not one fixed cutoff; a thick filum is not itself a diagnosis of tethered cord.

20.
arXiv (CS.LG) 2026-06-15

A Longitudinal Attribute-Conditioned Neural Network for Modeling Health-State Transition Probabilities in Temporally Irregular Data: The LANTERN Framework

arXiv:2606.13880v1 Announce Type: new Abstract: Accurate estimation of long-term care transition probabilities is central to disability insurance pricing, reserving, and solvency assessment. Classical actuarial multi-state models commonly rely on Markov, semi-Markov, or proportional-hazard specifications, which provide a direct connection to cohort projection but may be restrictive for irregular longitudinal health data with nonlinear aging patterns and heterogeneous covariate histories. This paper develops a well-calibrated estimator of multi-state transition probabilities for irregular longitudinal health data. The model learns from individual health history, incorporates the time elapsed between observations, and conditions transition probabilities on demographic and socioeconomic attributes. It produces a valid probability distribution over the next observed health state, with four possible states: healthy, mild disability, severe disability, and death. Individual probabilities are aggregated by age group and origin state to form transition matrices compatible with actuarial cohort projection. Using longitudinal data from the Health and Retirement Study, we compare the proposed estimator with logistic regression, gradient-boosted trees, a recurrent neural network, and a last-state persistence benchmark. The evaluation considers probabilistic accuracy, endpoint discrimination and calibration for severe disability and death, risk concentration, and transition matrix error after aggregation. The proposed estimator improves severe disability discrimination relative to logistic regression and gradient-boosted tree benchmarks, maintains strong calibration, and yields the lowest transition matrix error among the evaluated models in the held-out test analysis. Results show that a structured machine learning estimator can support long-term care transition modeling when judged by calibration and projection fidelity, beyond discrimination.

21.
arXiv (CS.AI) 2026-06-16

MADAR: An Address-Free Processor

arXiv:2606.15535v1 Announce Type: cross Abstract: In a modern processor, computing is the cheap part. Most of its area and energy go to addressing – moving operands to and from a register file and cache, and running the tags, ports, miss queues, and bypass networks that find a value where it was left. MADAR deletes that machinery by abolishing the address. All state circulates in rings of slots that advance one position per clock; instructions and data ride in the same slots; a value is named by its place in an orbit – a \rp{} coordinate – not by an address; a fixed station computes when a circulating instruction sweeps past its operands, on a schedule set at compile time; and a hierarchy of rings of increasing period replaces the cache hierarchy, movement between them scheduled rather than triggered by a miss. No prior circulating-store, dataflow, or statically scheduled machine combines all four of these. We define the execution model, validate it in a cycle-accurate register-transfer-level implementation, show it compilable – a constructive scheduler emits programs cross-checked against the implementation – and price it with a first-order energy model. The payoff is clearest for AI acceleration: the multiply-accumulate at the heart of every matmul and convolution compiles to a streaming form whose energy per operation stays flat as the reduction grows, and the operand reuse that makes matrix multiplication efficient is carried by the ring-period hierarchy – the memory hierarchy doing by rotation what a cache does by tags. MADAR is a new design point for any computation whose data movement is known before the program runs.

22.
arXiv (CS.AI) 2026-06-17

A T-API-Compliant ReAct Agentic Loop for Optical Networks: Generic vs. Domain-Specific Tool Abstractions

arXiv:2606.18000v1 Announce Type: cross Abstract: Optical networks need intent-driven, closed-loop agentic management, a key enabler for higher autonomy levels. We present the first T-API-compliant reasoning and act (ReAct) loop. We show that domain-specific composite tools achieve 90% oracle-validated correctness with threefold token savings compared to generic tools.

23.
arXiv (CS.CV) 2026-06-16

Focus, Align, and Sustain: Counteracting Gradient Dilution in Incremental Object Detection

Adapting Detection Transformers to Incremental Object Detection (IOD) poses a systemic challenge, as set-based optimization is inherently destabilized by sequential learning. In this work, we identify Gradient Dilution as the root cause of performance degradation, wherein optimization signals required to preserve old knowledge are progressively weakened. This phenomenon manifests as a cascading erosion of preservation gradients in magnitude, direction, and support coverage, driven by three tightly coupled factors: Signal Dispersion, where foreground gradients are overwhelmed by background noise; Assignment Drift, where stochastic query-target matching induces inconsistent gradient trajectories; and Support Attrition, where gradients from retained samples insufficiently cover the old-class feature space, weakening decision boundaries under interference from new classes. To counteract this, we propose FAS, a unified framework that Focuses, Aligns, and Sustains gradient flow throughout incremental learning. Specifically, we introduce prior-injected queries to focus discriminative signals by filtering background interference at the source. We further propose deterministic anchor distillation to align query-target assignments and enforce semantic consistency across stages under unstable matching. Finally, we devise manifold-support replay to sustain distributional support of old classes, counteracting representational erosion induced by continual updates. Extensive experiments show that FAS restores robust optimization dynamics and outperforms state-of-the-art methods, achieving over 5.0 AP improvement in the challenging 40+10x4 incremental setting.

24.
arXiv (CS.AI) 2026-06-11

OmniBioTwin: A System-of-Twinned-Systems Framework for Health Digital Twins

arXiv:2606.11264v1 Announce Type: cross Abstract: Health digital twins (HDTs) promise patient-specific modeling and decision support but current approaches remain structurally fragmented: monolithic models that address a single organ or task lack cross-scale fidelity, while system-level twins lack generalizable architectural frameworks. We propose OmniBioTwin, a System-of-Twinned-Systems (SoTS) framework that organizes HDTs as modular computational entities coupled through explicit interaction operators within a multi-layer network architecture. The framework comprises seven coordinated layers - spanning data integration, autonomous twin modeling, cross-scale coupling, temporal synchronization, and human-in-the-loop decision support. We demonstrate OmniBioTwin by instantiating a multiscale twin for glucagon-like peptide-1 (GLP-1) signaling pathways in Alzheimer's disease, illustrating how molecular, cellular, and organ-level twins can be composed and coupled within a unified system.

25.
arXiv (CS.CV) 2026-06-16

The Importance of Phase in Neural Representations: An Internal Oppenheim-Lim Test of Image Classifiers

Oppenheim and Lim (1981) showed that natural images stay recognizable when reconstructed from their Fourier phase alone, while the magnitude carries little of their identity. We ask whether trained image classifiers reproduce this asymmetry inside their hidden layers, and we test it causally: given two images, we transplant the phase of one onto the magnitude of the other at a chosen layer and record which image the prediction follows. In PRISM2D, GFNet, and ViT-B/16 the prediction follows the phase or sign donor, and deleting all image-specific magnitude barely moves accuracy, so identity rides on phase while image-specific magnitude is largely dispensable to the readout. ResNet-50 at first seems to break the pattern, because transplanting sign after its ReLUs does nothing; a fair intervention before the ReLU reveals a strong latent sign code in the late blocks, and a DC-only control shows the readout consumes a channel-wise spatial average. Controls rule out the trivial case in which magnitude simply stops depending on the image. The architectures therefore share a phase/sign identity code but expose it in different bases, set by rectification and readout geometry, which gives a mechanistic account of the texture–shape gap between CNNs and attention models.