Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-17

SierpinskiCam: Camera-Controlled Video Retaking with Sierpinski Triangle Pattern Cues

Generating novel renderings of a scene along user-defined camera trajectories from a single monocular video, dubbed video retaking, is a compelling but difficult problem in content creation and visual effects. Existing geometry-guided approaches reconstruct a 4D representation from the source video and render it along the target trajectory to condition video diffusion models. However, this guidance degrades as the target camera departs from the source trajectory, leaving newly revealed regions sparse or entirely missing. We propose SierpinskiCam, which addresses this limitation by augmenting geometry-based guidance with Sierpinski dome texture cues that contains rich trackable features even under large viewpoint changes. We further introduce a reference video conditioning mechanism that appends source-video tokens to the target-token sequence and separates the two streams with negative RoPE indices, enabling appearance grounding without architectural modification or per-video adaptation. Extensive experiments show that SierpinskiCam achieves significant gains in camera controllability, geometric consistency, and video quality across diverse and challenging retaking scenarios. Project page: https://hyelinnam.github.io/SierpinskiCam/.

02.
arXiv (CS.CV) 2026-06-18

SPARX: Secure and Privacy-Aware Approximate CNN Acceleration with Edge RISC-V SoC

Edge-AI systems increasingly require real-time CNN inference under strict energy, performance, security, and privacy constraints. Approximate computing improves hardware efficiency by exploiting the error resilience of neural network workloads; however, most approximate CNN accelerators do not jointly consider secure, privacy-aware edge deployment. This paper presents SPARX, a Secure and Privacy-Aware Approximate CNN Acceleration framework integrated within a heterogeneous RV32IMC RISC-V System-on-Chip (SoC). SPARX combines a custom RISC-V instruction extension, an approximate logarithmic CNN acceleration unit, a lightweight differential-noise-based privacy engine, and a challenge-response authentication mechanism. To guide arithmetic selection, an approximation-aware decision framework is introduced that uses the Approximation Severity Index (ASI), Approximation Efficiency (AE), Quality of Approximation (QoA), Approximation Figure-of-Merit (AFOM), and Hardware Acceleration Efficiency (HAE). Evaluation across 11 state-of-the-art approximate MAC architectures identifies the Iterative Logarithmic Multiplier (ILM) as the most suitable design, achieving 51.7% area reduction, 81.5% power reduction, and 2.13x throughput improvement compared with an accurate radix-4 Booth MAC, while only reducing ResNet-20/CIFAR-10 accuracy by 2.82 percentage points. FPGA implementation on a Xilinx VC707 platform achieves 58.4 GOPS/W energy efficiency at 250 MHz, while 28-nm CMOS physical implementation validates ASIC feasibility

03.
arXiv (CS.AI) 2026-06-19

Which Pairs to Compare for LLM Post-Training?

arXiv:2606.19607v1 Announce Type: new Abstract: Preference-based post-training has become a central paradigm for aligning language models. A common data-collection strategy is to generate a small set of completions for each prompt and label the resulting comparison pairs. However, human preference labels are often much more expensive than generating additional completions, suggesting a different use of the same labeling budget: generate a larger pool of completions, but label only the most informative comparison pairs. This paper studies which pairs should be compared in preference-based post-training. We formulate comparison curation as a sampling-design problem and evaluate designs by the quality of the final policy under the preference-based post-training objective. We instantiate this framework for Direct Preference Optimization (DPO), analyzing how the choice of labeled pairs propagates through DPO training to downstream policy performance. Our main results provide matching upper and lower bounds on the post-training optimality gap of the DPO-trained policy. The bounds show that comparison selection affects downstream performance through a single design-dependent information matrix, which links label allocation to parameter estimation error and policy suboptimality. This yields an explicit optimization criterion for budgeted comparison curation and motivates practical sampling designs for selecting informative pairs from large generated completion pools. Experiments on synthetic settings and language-model post-training benchmarks show that the proposed designs consistently improve sample efficiency over common comparison-selection heuristics.

04.
medRxiv (Medicine) 2026-06-19

Performance of family history-based colorectal cancer screening criteria by race and age at diagnosis in the Disparities and Cancer Epidemiology (DANCE) study

Importance: Family history (FH) and age are the primary criteria employed for early colorectal cancer (CRC) risk stratification. We evaluated how well these criteria identify individuals diagnosed with CRC across age and racial groups. Objective: To evaluate the performance of FH and age based screening criteria for identifying individuals with CRC, with attention to differences by race and age at diagnosis. Design, Setting, and Participants: This case control and case only analysis used data from the Disparities and Cancer Epidemiology (DANCE) cohort, a population based study of invasive CRC cases diagnosed from 2013 to 2022, recruited through the Metropolitan Detroit Cancer Surveillance System and the Louisiana Tumor Registry. Analyses included 1,158 non-Hispanic Black (NHB) and non-Hispanic White (NHW) CRC cases and 1,434 cancer-free controls from the Inflammation Health and Lung Epidemiology (INHALE) study, enrolled from the same Detroit catchment area. Data were analyzed in 2025. Exposures: Self reported cancer FH among first-degree (FD) relatives and grandparents, summarized into three FH-based screening criteria: at least one FD relative with CRC (colon early-screening criterion), any FH of Lynch syndrome related cancers, and meeting NCCN criteria for Lynch syndrome genetic testing. Main Outcomes and Measures: Proportion of cases meeting each FH based screening criterion stratified by race and age at diagnosis (

05.
arXiv (quant-ph) 2026-06-12

Trading symmetry for Hilbert-space dimension in Bell-inequality violation

arXiv:2601.02893v3 Announce Type: replace Abstract: In quantum information, asymmetry, i.e., the lack of symmetry, is a resource allowing one to accomplish certain tasks that are otherwise impossible. Similarly, in a Bell test using any given Bell inequality, the maximum violation achievable using quantum strategies respecting or disregarding a certain symmetry can be different. In this work, we focus on the symmetry involved in the exchange of parties and explore when we have to trade this symmetry for a lower-dimensional quantum strategy in achieving the maximal violation of given Bell inequalities. For the family of symmetric Collins-Gisin-Linden-Massar-Popescu inequalities, we provide evidence showing that there is no such trade-off. However, for several other Bell inequalities with a small number of dichotomic measurement settings, we show that symmetric quantum strategies in the minimal Hilbert space dimension can only lead to a suboptimal Bell violation. In other words, there exist symmetric Bell inequalities that can only be maximally violated by asymmetric quantum strategies of minimal dimension. In contrast, one can also find examples of asymmetric Bell inequalities that are maximally violated by symmetric correlations. The implications of these findings on the geometry of the set of quantum correlations and the possibility of performing self-testing therefrom are briefly discussed.

06.
arXiv (CS.AI) 2026-06-11

Blind Dexterous Grasping via Real2Sim2Real Tactile Policy Learning

arXiv:2606.11767v1 Announce Type: cross Abstract: Blind grasping with a dexterous hand is a crucial manipulation capability. Nevertheless, learning such tactile-only policies for real robots remains challenging due to the tactile sim-to-real gap and the limited expressiveness of sparse tactile signals. To bridge this gap, we propose a framework for tactile-only blind grasping that is deployable on a physical multi-fingered robotic hand. Our approach combines three key components. First, we introduce a Real2Sim tactile calibration pipeline that constructs a contact-calibrated digital-twin simulator capable of reproducing real tactile signals. Second, we improve the expressiveness of sparse tactile observations using a layout-aware tactile encoder, which incorporates sensor-geometry priors through self-supervised pretraining. Third, to improve generalization to unseen objects, we train object-specific reinforcement-learning experts in the calibrated simulator and aggregate their successful grasp trajectories into a tactile-conditioned Diffusion Policy. We evaluate our method on a physical LEAP Hand equipped with distributed tactile sensing across 10 seen and 10 unseen objects. The deployed policy achieves a 27\% real-world grasp success rate across all 20 objects, without real-world grasping demonstrations or visual input. Simulation ablations show that layout-aware tactile pretraining improves grasping performance, while sensing-level evaluations confirm that Real2Sim calibration increases the consistency of tactile contact events between simulation and hardware. Together, these results suggest that contact-event calibration, geometry-aware tactile representation learning, and diffusion-based policy aggregation provide an effective path toward tactile-only blind grasping on real dexterous robotic hands. Project page:Dex-Blind-Grasp.github.io.

07.
arXiv (CS.CV) 2026-06-18

Quantification of Uncertainty with Adversarial Models in Medical Image Segmentation

Reliable pixel-level uncertainty quantification holds the potential to transform clinical workflows by enabling high-fidelity longitudinal monitoring and distinguishing true pathological changes from artifacts. Ideally, these models provide the stability required for critical treatment planning and surgical intervention. However, standard deep learning models often suffer from miscalibration, yielding overconfident predictions that mask underlying vulnerabilities at subtle pathological boundaries. To address this, we propose QUAM-SM, a post-hoc framework using targeted adversarial search to identify "adversarially fragile" pixels. By actively seeking perturbations that expose predictive instability, our method highlights regions where decisions are most vulnerable to being flipped. Importantly, the framework disentangles epistemic uncertainty from aleatoric uncertainty. Experiments on two public datasets with multiple expert annotations demonstrate that QUAM-SM outperforms both standard and recent uncertainty estimation approaches in terms of reliability and boundary sensitivity. Code is available at https://github.com/HanaJebril/quam_sm

08.
arXiv (CS.CV) 2026-06-11

How Seemingly Inconsequential Design Choices Dictate Performance of LLMs in Pathology

General-purpose large language models (LLMs) are routinely used as baselines when evaluating specialized pathology models on whole-slide images (WSIs). Because WSIs exceed contemporary model context limits, LLM baselines routinely use small, high-magnification patches processed independently via majority voting, without systematic evaluation of seemingly inconsequential design choices such as patch size, patch count, and magnification. Generalist LLMs have consistently underperformed specialized systems, reinforcing the perception that domain-specific training or architectural adaptation is necessary for pathology tasks involving WSIs. Here, we conduct a systematic factorial analysis of four input design factors: inference mode, patch size, magnification, and patch count. We demonstrate that prior studies have overstated the gap between specialized models and general-purpose LLMs by choosing non-optimized input configurations. On the MultiPathQA benchmark, switching to a single balanced configuration (large patches at lower magnification, processed jointly) raises GPT-5 from 15.1% to 39.5% on cancer-type classification (TCGA) and from 38.1% to 62.9% on organ classification (GTEx). Per-task optimization yields further gains up to 43.9% (TCGA) and 71.6% (GTEx). The same configuration generalizes to two other models and to a fully held-out CPTAC cohort, where it improves Gemini 3 Flash by 23.4 percentage points without any task-specific tuning.

09.
arXiv (CS.LG) 2026-06-15

Denoising Score Matching with Random Features: Insights on Diffusion Models from Precise Learning Curves

arXiv:2502.00336v3 Announce Type: replace Abstract: We theoretically investigate the phenomena of generalization and memorization in diffusion models. Empirical studies suggest that these phenomena are influenced by model complexity and the size of the training dataset. In our experiments, we further observe that the number of noise samples per data sample ($m$) used during Denoising Score Matching (DSM) plays a significant and non-trivial role. We capture these behaviors and shed insights into their mechanisms by deriving asymptotically precise expressions for test and train errors of DSM under a simple theoretical setting. The score function is parameterized by random features neural networks, with the target distribution being $d$-dimensional Gaussian. We operate in a regime where the dimension $d$, number of data samples $n$, and number of features $p$ tend to infinity while keeping the ratios $\psi_n=\frac{n}{d}$ and $\psi_p=\frac{p}{d}$ fixed. By characterizing the test and train errors, we identify regimes of generalization and memorization as a function of $\psi_n,\psi_p$, and $m$. Our theoretical findings are consistent with the empirical observations.

10.
arXiv (quant-ph) 2026-06-19

Topological Codes Based on Space Groups

arXiv:2606.20548v1 Announce Type: new Abstract: Topological codes form one of the most important classes of stabilizer codes. Most existing algebraic constructions and analyses of topological codes assume translation invariance. Here we show that topological codes can arise in more general settings by incorporating point group operations. The central construction is a class of Calderbank-Shor-Steane (CSS) codes called space-group codes, whose check operators are built from group-algebra templates over space groups that combine translations with point-group operations. We develop methods for analyzing topological properties of space-group codes using ring-modules and their invariant theory. At first glance, space-group codes might appear to complicate practical implementation; however, we find that they can exhibit greater locality than previous codes based purely on translations. Our framework thus extends the landscape of topological codes and opens up a broader design space for the co-design of topological codes with quantum computing platforms.

11.
medRxiv (Medicine) 2026-06-15

Multidimensional nutritional assessment in Crohns disease: cross-sectional comparison of active disease and remission

Malnutrition is common in Crohns disease (CD), and its assessment requires multiple tools. Comprehensive evaluation of nutritional status in a population with CD, predominantly characterized by metabolic phenotype, was inadequately reported. This study evaluated the nutritional status of CD patients using anthropometric, clinical, and biochemical measures and compared patients with active disease with those in remission. This cross-sectional study included 127 adults with CD: 63 with active disease and 64 in remission. Disease activity was classified using the Crohns Disease Activity Index, the Simple Endoscopic Score for Crohns Disease, and magnetic resonance enterography. Nutritional assessment included body mass index (BMI), mid-upper arm circumference, calf circumference, triceps skinfold thickness, mid-arm muscle circumference, Mini Nutritional Assessment-Short Form (MNA-SF), and biochemical markers including hemoglobin, serum iron, folate, vitamin B12, albumin, and zinc. Malnutrition was defined using the Global Leadership Initiative on Malnutrition criteria. Overall, 47.2% of participants were malnourished. Malnutrition was significantly more frequent in active disease than in remission (81.0% vs. 14.1%, P

12.
arXiv (CS.AI) 2026-06-18

Correct Yourself, Keep My Trust: How Self-Correction and Social Connection Shape Credibility in Social Chatbots

arXiv:2606.19286v1 Announce Type: cross Abstract: When social chatbots make mistakes, and they do, how they recover determines whether users trust them again. Social chatbots are increasingly integrated into everyday life, yet they remain prone to generating convincing but inaccurate information. The social connection they build with users makes such errors particularly consequential. We conducted a between-subjects experiment (N=120) comparing three error correction strategies: a webpage retraction, self-correction by the same social chatbot, and correction by an expert chatbot. Our results reveal two key findings. First, all three strategies corrected the error equally well, but only self-correction did so without damaging the chatbot's credibility: participants rated self-correcting chatbots significantly higher in both trustworthiness and perceived expertise than chatbots whose errors were corrected by external sources. Second, the strength of the user's social connection with the chatbot, measured through social attraction and self-disclosure, significantly predicted the magnitude of belief change, but only when the chatbot corrected itself. Outsourcing corrections to an external source severed this link entirely. These findings suggest that social chatbots should correct their own mistakes rather than outsource corrections, and that investing in social connection is a functional mechanism that amplifies correction effectiveness, not merely a design feature. We discuss implications for designing chatbots that maintain long-term credibility while effectively addressing their own errors.

13.
arXiv (CS.AI) 2026-06-12

From AGI to ASI

arXiv:2606.12683v1 Announce Type: new Abstract: Over the last decade, building human-level artificial general intelligence has moved from far-fetched speculation to being a concrete next-decade target for many of the largest AI organisations. Achieving this goal would have profound and far-reaching impacts on human society, which raises many complex questions for the decade ahead. This report investigates how AI itself might continue to develop in a post-AGI world along the continuum of machine intelligence. The endpoint of this continuum, Universal AI, is theoretically well understood, which provides some formal grounding for the main focus of this report: the transition from human-level AGI to artificial general superintelligence, which, intuitively, can be understood as a system that is more intelligent and cognitively capable than large organisations of humans. After characterizing ASI, the report discusses four potential pathways from AGI to ASI: scaling AGI, AI paradigm shifts, recursive improvement, and ASI emerging from large-scale multi-agent collectives. The report then discusses possible frictions and bottlenecks along these pathways. Determining whether the impact of these frictions will be negligible or substantial raises a number of concrete open research questions. Due to large uncertainties for predicting ASI progress, it cannot be ruled out that AI progress might continue to accelerate over the next years. This could imply that the image of a single transformative step change, caused by the introduction of human-level AGI into our society, could be inaccurate. More apt might be the prospect of a series of transformative societal changes caused by AI-enabled progress and breakthroughs across many areas of science and technology. Preparing for this prospect requires a massively interdisciplinary endeavour of global scope and interest.

14.
arXiv (CS.LG) 2026-06-16

Surrogate-Assisted Framework for SI-Compliant Interconnect Design Optimization Using the Earth Mover's Distance

arXiv:2606.15234v1 Announce Type: cross Abstract: This work presents a deterministic, machine-assisted framework for SI-compliant PCB design based on the Earth Mover's Distance (EMD). In contrast to conventional surrogate-based optimization methods that rely on iterative black-box search procedures, the proposed approach follows an interpretable, sequential evaluation strategy. Neural surrogate models are first used to efficiently predict waveform describing features from topology-dependent design parameters. A decision tree then acts as a physically motivated quality gate that identifies SI-compliant waveforms according to predefined SI criteria. Within the resulting valid solution space, the Earth Mover's Distance is employed as a similarity metric to rank candidate designs according to their proximity to an ideal reference signal. This enables not only the deterministic identification of admissible parameter regions but also a transparent prioritization of physically superior solutions without inverse modeling or stochastic search procedures. The methodology is demonstrated using a large-scale set of simulated DDR3 fly-by waveforms. By combining surrogate prediction, interpretable classification, and EMD-based waveform evaluation, the framework provides an explainable and computationally efficient alternative to conventional optimization strategies for supporting PCB development with AI-based methods.

15.
Nature (Science) 2026-06-22

C-glycoside synthesis via radical cross-coupling of glycohydrazides

作者:

Carbohydrates are among the most abundant and structurally diverse biomolecules in nature, playing central roles in energy storage, molecular recognition, and cell signaling. Within this domain, C-glycosides1-3, in which the oxygen atom of the glycosidic bond in O-glycosides is replaced by carbon, have emerged as valuable motifs in medicinal chemistry due to their resistance to enzymatic hydrolysis2,4. Of particular importance are C-aryl glycosides, exemplified by the SGLT2 inhibitors dapagliflozin, canagliflozin, and empagliflozin, which are frontline therapies for type 2 diabetes5-7. However, scalable syntheses of C-aryl glycosides have traditionally relied on protected sugar derivatives, lengthy sequences, or conventional cross-couplings that often suffer from poor selectivity, limited scope, and extensive protecting-group manipulation6. Herein, we report a practical approach to C-aryl glycosides using glycosyl sulfonyl hydrazides as redox-neutral radical precursors for cross-coupling. Prepared directly from unprotected native sugars, these reagents generate glycosyl radicals under mild conditions and enable efficient access to diverse C-aryl glycosides, including all approved SGLT2 inhibitors, natural products such as salmochelins and neopetrosins, and medicinally relevant probes. Beyond anomeric functionalization, this platform enables C–C bond formation at multiple positions on carbohydrate scaffolds and supports stereoretentive radical coupling that can override inherent stereochemical biases, expanding practical access to carbohydrate-derived therapeutics and chemical tools.

16.
arXiv (CS.CV) 2026-06-16

PhyloSDF: Phylogenetically-Conditioned Neural Generation of 3D Skull Morphology via Residual Flow Matching

Generating novel, biologically plausible three-dimensional morphological structures is a fundamental challenge in computational evolutionary biology, hampered by extreme data scarcity and the requirement that generated shapes respect phylogenetic relationships among species. In this work, we present PhyloSDF, a phylogenetically-conditioned neural generative model for 3D biological morphology that integrates two innovations: (1) a DeepSDF auto-decoder regularized by a novel Phylogenetic Consistency Loss that structures the latent space to correlate with evolutionary distances (Pearson r=0.993); (2) a Residual Conditional Flow Matching (Residual CFM) architecture that factorizes generation into analytic species-centroid lookup and learned residual prediction, enabling generation from as few as ~4 specimens per species. We evaluate PhyloSDF on 100 micro-CT-scanned skulls of Darwin's Finches and their relatives across 24 species. The model generates novel meshes achieving 88-129% of real intra-species variation at the code level, with all 180 generated meshes verified as non-memorized. Residual CFM surpasses denoising diffusion (which fails entirely at this scale), standard flow matching (which mode-collapses to 3-6% variation), and a Gaussian mixture baseline in both fidelity (Chamfer Distance 0.00181 vs. 0.00190) and morphometric Fr\'{e}chet distance (10,641 vs. 13,322). Leave-one-species-out experiments across 18 species demonstrate phylogenetic extrapolation capability, and smooth latent interpolations produce biologically plausible ancestral skull reconstructions.

17.
arXiv (CS.AI) 2026-06-15

CARE: Controlling LLM-Generated Policies through Auditable Review of Evidence in Scientific Experimentation

arXiv:2606.14581v1 Announce Type: cross Abstract: Granting LLMs direct control over costly, irreversible scientific experiments leads to unsafe exploration and unstable performance, but discarding LLM creativity entirely sacrifices significant optimization potential. We introduce CARE (Controlling LLM-Generated Policies through Auditable Review of Evidence in Scientific Experimentation), an auditable controller for high-throughput experimentation (HTE) optimization that keeps a non-LLM incumbent optimizer as the default action path while using LLMs to revise challenger ranking policies. Before each outcome is revealed, a public-evidence intervention gate compares the challenger with the incumbent. It authorizes the challenger's selection only when the evidence available before selection supports the change, with the decision recorded in the audit log. CARE outperforms all other evaluated methods on Minerva/Olympus and ChemLex benchmarks, with final-best improving from 80.0 to 88.5 on Minerva/Olympus and from 83.9 to 92.1 on ChemLex, relative to the public incumbent. Our experiments indicate that LLM self-evolution is more reliable when it expands the proposal space under an auditable controller, rather than directly choosing experiments.

18.
medRxiv (Medicine) 2026-06-17

Deep learning for interactive and automated inner retinal layer segmentation in OCT images of patients with retinitis pigmentosa using limited training data

Purpose: New therapeutic strategies such as optogenetics have created a need for accurate tracking of inner retina degeneration in Retinitis pigmentosa (RP) patients. We introduce two tailored deep learning models to segment the RNFL (retinal nerve fibre layer), GCIPL (ganglion cell inner plexiform layer), INL (inner nuclear layer), CFT (central foveal thickness) and RPE (retinal pigment epithelium) in RP: The first is based on a Segment Anything Model (SAM), the second on nnU-Net. To our knowledge, SAM has not yet been applied to retinal layers in OCT data. Methods: SD-OCT images of a retrospective cohort of 37 RP patients were included. Data for four training cycles were prepared semi-automatically in MATLAB, then assessed and corrected by three expert graders. 1,700 segmented B-Scans from two open datasets were used for pretraining. For post-processing, semantic retinal boundary detection was developed. The final models, OCT-SAM and nnU-Net, were trained on 228 annotated RP scans. Detected layer thicknesses were validated against manual segmentation at 90 random points in 30 OCT B-Scans. Finally, OCT-SAM was tested on three RP cases with retrospective, longitudinal OCT data. Results: nnU-Net achieved a precision, recall and F-1 score of 0.96 while OCT-SAM performance resulted in slightly lower values of 0.93, 0.8 and 0.85, respectively. OCT-SAM measurements had low bias and good agreement with manual annotations, confirming reliability. Conclusions: OCT-SAM enabled fast data annotation and tool integration, whereas nnU-Net provided the best segmentation performance. OCT-SAM demonstrated longitudinal reproducibility and detected RP-characteristic pathologies and degenerative changes. Future work will extend OCT-SAM to 3D OCT segmentation.

19.
arXiv (quant-ph) 2026-06-19

Smooth time-dependent control of dipolar Bose-Einstein condensates

arXiv:2606.20507v1 Announce Type: cross Abstract: We consider protocols for control of dipolar Bose-Einstein condensates where the critical role is played by the long-range anisotropic interatomic magnetic dipole-dipole interaction. The phase diagram of such a condensate has been explored theoretically and experimentally with certain values of the interatomic scattering length corresponding to superfluid and supersolid phases, where supersolidity appears as a modulation in the ground state density. Preparation of this modulated ground state is challenging, since excitations appear as a result of a finite-time evolution required to produce qualitative changes in the wavefunction density. To solve this problem we consider the time-dependent control of a dipolar Bose-Einstein condensate using shortcuts to adiabaticity techniques, concentrating on design of the time-dependent scattering length, a parameter of the system easily tunable by contemporary experiments. The first technique is the variational approach based on the Euler-Lagrange equations for a separable ansatz describing the evolution of the superfluid state. Secondly, we study the transition from superfluid to supersolid using a direct optimization protocol. We discuss the fidelity of the developed protocols in terms of the evolution time.

20.
arXiv (CS.LG) 2026-06-18

A Cross-Model VLM-Judge Protocol for Single-Image 3D Mesh Quality (and Why Cheap Proxies Fall Short)

arXiv:2606.18451v1 Announce Type: new Abstract: Single-image-to-3D generators are improving quickly, but there is no agreed, human-free way to tell whether one generated mesh is better than another. Practitioners commonly rely on cheap automatic proxies (render-space CLIP similarity and mesh geometry-validity statistics), yet how well these track perceived quality is unestablished. We make two contributions. First, we propose and validate a reproducible VLM-judge evaluation protocol: a fixed 24-view headless render rig, two independent vision-language judge families, and a mandatory position-bias correction that queries both presentation orders and keeps only order-consistent verdicts. The two judge families agree substantially with each other (Cohen's kappa = 0.66), well above the chance-agreement floor. Second, using this protocol as the reference, we show the cheap proxies do not substitute for it. Geometry validity is only a weak signal on average (because, as we show, it is bimodal) and stays below our pre-registered target, while render-CLIP is at chance. A learned Bradley-Terry head collapses onto a single manifoldness statistic (giving render-CLIP a negative weight) and matches geometry-only exactly, so learning the feature weights buys nothing. The proxy is also bimodal: it is significantly above chance on contrasts with visible geometric defects but at chance on ambiguous contrasts, consistent with geometry validity tracking the judge only when the defect is visually salient. We therefore recommend the VLM-judge protocol as a reliable, reproducible evaluator under the conditions tested (two feed-forward generators on Google Scanned Objects, with a face-drop degradation regime) and advise against geometry/CLIP proxies as optimization targets.

21.
arXiv (CS.LG) 2026-06-16

How Controlling the Variance can Improve Training Stability of Sparsely Activated DNNs and CNNs

arXiv:2602.05779v2 Announce Type: replace Abstract: The Edge-of-Chaos (EoC) theory developed for the random initialization of deep networks allows more efficient training by both preserving information in the initial outputs of the network and minimising exploding or vanishing gradients through characterisation of the intermediate layers as Gaussian processes. This EoC theory provides formulae for the choice of the initialisation distribution variances of the weights and biases. For activations which are approximately linear around the origin, the EoC theory typically encourages the Gaussian process variance to converge towards zero with increasing depth. Here we consider the less studied setting of highly sparsity inducing activations where a large region of values near the origin are set to zero. In this setting we prove a new phenomenon whereby initialisations leading to larger fixed Gaussian processes are beneficial to training stability. This theory informs a new, yet simple, initialisation strategy that allows training DNNs and CNNs with as large as 90\% sparsity in the hidden layers.

22.
arXiv (CS.LG) 2026-06-18

PACT: Preserving Anchored Cores in Task-vectors for Model Merging

arXiv:2606.18627v1 Announce Type: new Abstract: Model merging has emerged as a training-free alternative to multi-task learning, aiming to combine multiple task-specific fine-tuned models into a single multi-task model. Most existing model merging approaches follow the Task Arithmetic paradigm, which decomposes fine-tuned weights into pre-trained parameters and task vectors, and performs merging exclusively in the task-vector space. The effectiveness of this paradigm implicitly relies on the assumption that task-specific knowledge is encoded solely within task vectors. We argue that this assumption generally does not hold due to the intrinsic task preferences of pre-trained models. Specifically, we identify Load-Bearing Wall (LBW) dimensions, namely some task-critical knowledge that remains embedded in the pre-trained weights rather than being fully transferred into task vectors. We characterize LBW dimensions from both scalar-weight and subspace perspectives, thereby covering the major paradigms of existing model merging methods. Our analysis reveals that, by ignoring LBW dimensions, task-vector-based approaches fail to fully resolve task conflicts and may inadvertently damage task-specific knowledge encoded in the pre-trained model, leading to degradation. To address this issue, we propose PACT, which preserves the anchored task-specific cores (i.e., LBW dimensions) within task vectors by aligning their orthogonal complements with the subspace of the pre-trained weights. These aligned subspace components are then removed from the task vectors before applying existing model merging algorithms. Furthermore, we develop an efficient variant based on randomized SVD to improve scalability. PACT can be seamlessly integrated with existing methods. Extensive experiments across multiple benchmarks demonstrate that PACT consistently enhances mainstream model merging approaches and establishes new state-of-the-art performance.

23.
arXiv (CS.CV) 2026-06-19

GenTrack: A New Generation of Multi-Object Tracking

This paper introduces a novel multi-object tracking (MOT) method, dubbed GenTrack, whose main contributions include: first-a hybrid tracking approach employing both stochastic and deterministic manners to robustly handle unknown and time-varying numbers of targets, particularly in maintaining target identity (ID) consistency and managing nonlinear dynamics, second-leveraging particle swarm optimization (PSO) with some proposed fitness measures to guide stochastic particles toward their target distribution modes, enabling effective tracking even with weak and noisy object detectors, third-integration of social interactions among targets to enhance PSO-guided particles as well as improve continuous updates of both strong (matched) and weak (unmatched) tracks, thereby reducing ID switches and track loss, especially during occlusions, fourth-a GenTrack-based redefined visual MOT baseline incorporating a comprehensive state and observation model based on space consistency, appearance, detection confidence, track penalties, and social scores for systematic and efficient target updates, and five-the first ever publicly available source-code reference implementation with minimal dependencies, featuring three variants, including GenTrack Simple, Strengthen, and Super, facilitating flexible reimplementation. Experimental results have shown that GenTrack provides superior performance on standard benchmarks and real-world scenarios compared to state-of-the-art trackers, with integrated implementations of baselines for fair comparison. Potential directions for future work are also discussed. The source-code reference implementations of both the proposed method and compared-trackers are provided on GitHub: https://github.com/SDU-VelKoTek/GenTrack

24.
Nature (Science) 2026-06-11

Daily briefing: Deep-sea whale graveyard is a treasure trove of fossils

作者:

Researchers have uncovered more than 400 fossilized whale bones in an ocean-floor chasm. Plus, the working lives of scientists, in pictures, and how AI could slow the pace of research publication for the better. Researchers have uncovered more than 400 fossilized whale bones in an ocean-floor chasm. Plus, the working lives of scientists, in pictures, and how AI could slow the pace of research publication for the better.

25.
arXiv (CS.LG) 2026-06-15

LapidaryEngine: Fully Conversational Crystal Generation

arXiv:2606.14215v1 Announce Type: new Abstract: The emergence of Large Language Models (LLMs) has inspired the vision of generating bespoke crystal materials directly from natural-language instructions, enabling users to design materials through intuitive, conversational interaction. Existing text-to-crystal generative models represent important early steps toward this goal, but they suffer from two critical limitations: (i) restricted input formats that require highly structured descriptions (e.g., chemical formulas), and (ii) one-directional generation, where models can map text to crystal but cannot perform the inverse. These limitations prevent fully conversational workflows and hinder alignment with users' inherently ambiguous and evolving desiderata. We address these challenges with LapidaryEngine, the first model to support fully conversational crystal generation. LapidaryEngine accepts free-form natural-language requests and performs iterative refinement and editing in a dialogue-like manner. The key innovation is a pivot representation, a third, intermediate form that enables bidirectional translation between text and crystal structures despite the absence of direct paired datasets. Leveraging this pivot allows robust interpretation of user feedback and precise structural control. We demonstrate LapidaryEngine across diverse tasks, including insulator discovery, stability optimization, compositional modification, and structural editing, showcasing its ability to align generated materials with user intent in an interactive manner.