How do researchers choose what to work on?
A scientist’s account of switching focus to tackle pressing problems, and researchers consider the best way to preserve eggs, in our weekly dip into Nature’s archive. Snippets from Nature’s past.
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
A scientist’s account of switching focus to tackle pressing problems, and researchers consider the best way to preserve eggs, in our weekly dip into Nature’s archive. Snippets from Nature’s past.
arXiv:2606.14088v1 Announce Type: new Abstract: Near-term variational classifiers incur substantial error and latency from two-qubit gates, yet practitioners often assume that additional entangling depth is the default route to higher accuracy. This work studies Optimal Quantum Measurement Decoding (OQMD): optimizing how quantum outcomes are mapped to classical labels by training a readout layer before measurement, jointly with the variational circuit, without adding CNOTs. Experiments use trainable triple single-qubit rotations as one concrete, hardware-native realization of OQMD; other single-qubit parametrizations fit the same classical outer loop. On the Iris benchmark with a 30-point stratified test split, the best observed 0-CNOT configuration with OQMD reaches 83.33\% accuracy, with a 96\% at 9 CNOTs, exceeding the best 18-CNOT controls (56.67\%) and the best 18-CNOT configuration with OQMD (66.67\%) under a common protocol. A six-point CNOT-depth series from 0 to 18 (fixed optimizer, iteration budget, random-seed count, and ZXZ readout) shows that the highest raw scores need not occur at the largest template, so aggregate complexity is not summarized by CNOT count alone. Because run-level accuracies are discrete and non-Gaussian, we emphasize best-observed scores and, where a global comparison of pooled runs is required, Mann–Whitney $U$ tests rather than parametric tests on means. Across architectures, OQMD shows statistically consistent but magnitude-dependent gains: large peak lifts on minimal circuits coexist with a small pooled mean shift on complex 18-CNOT runs ($p\approx 0.03$) that is not ``universal'' in the sense of uniformly large practical effects.%
arXiv:2606.18257v1 Announce Type: cross Abstract: While LLMs show promise in automating educational content creation, their ability to generate questions that stimulate higher-order thinking remains understudied. This work evaluates six widely-used LLMs through a Bloom's Taxonomy lens, focusing on their capacity to transcend rote memorization and achieve cognitive leaps. Using a hybrid human–AI evaluation protocol, we generate and analyze 20{,}700 questions across computer science, K–12 math, and social-science domains. Key contributions include: (1) a fine-grained prompting strategy that reduces question repetitiveness by 24.45\% for Qwen2.5-7B-Instruct, and increases the proportion of higher-order cognitive level outputs by 11.53\% for InternLM3-8B-Instruct; (2) quantitative metrics for cognitive shift intensity (CogShift) and category drift, revealing InternLM3's superior performance in multi-level transitions; (3) an interpretability analysis revealing metric-level correlations that enhance the transparency of Chain-of-Thought prompting. Our findings highlight the importance of cognitive-aware prompt design and provide benchmarks for deploying LLMs in personalized learning systems.
arXiv:2606.15559v1 Announce Type: cross Abstract: The transition toward software-defined vehicles concentrates an increasing share of vehicle functionality into distributed software services, where failures propagate through service dependencies and the surface symptom is often several causal hops away from the underlying defect. Existing approaches to causal root-cause analysis in such systems address this only partially: they typically reason over a single observability modality and operate in an offline, operator-driven mode that does not match the demands of continuous vehicle operation. This paper presents SDVDiag, a multimodal causal-discovery pipeline that fuses log-based and metric-based service representations into a shared embedding space before graph construction, coupled with an anomaly-driven trigger that converts the diagnostic platform from a manually operated batch tool into a continuously running online system. Evaluation on an Autonomous Valet Parking testbed shows that the multimodal pipeline produces sparser causal graphs than a metrics-only baseline (134 vs. 182 edges on average) and consistently outperforms it in edge-weighted reward against an expert knowledge graph at every stage of human-feedback refinement, showing a 2.4-fold improvement over the baseline after 60 feedback queries. An end-to-end fault-injection scenario further demonstrates that the integrated trigger correctly recovers a true root cause located two causal hops upstream of the observable symptom.
PURPOSE: As the armamentarium of BPH therapies continues to expand, it remains imperative to maximize patient satisfaction and minimize decisional regret. We sought to determine the impact of time from BPH diagnosis to index treatment on symptom improvement and subsequent procedural events. MATERIALS AND METHODS: We queried the American Urological Association Quality Registry for men [≥] 40 years old with BPH, available IPSS data, and no receipt of prior BPH treatment. Index treatment included medication, surgery, or minimally invasive surgical therapy (MIST). Outcomes included IPSS over 3 years of follow-up, change in percentage of mild lower urinary tract symptoms (LUTS) by 3 months, and time to procedural event. Patients were stratified by time from index diagnosis to treatment by 3 years. Outcomes were compared across time-to-treatment cohorts with appropriate statistical tests with p < 0.05 as significant. RESULTS: 43,919 patients met criteria with 19,642 pursuing treatments. Patients pursued treatment at comparably lower baseline IPSS compared to prior prospective series. Patients undergoing surgery and MIST had significantly higher baseline IPSS, while medical comorbidities were significantly more common among men initiating pharmacotherapy. Early surgery and MIST were associated with significant improvement in IPSS within 6-12 months and an increase in mild LUTS by 3 months. All forms of early treatment were associated with delayed time to procedural events, including catheterization and fulguration. CONCLUSIONS: Early procedural intervention for BPH is associated with early symptom improvement and delayed time to procedural events among real-world, contemporary practice.
arXiv:2506.03453v3 Announce Type: replace Abstract: Global control provides a promising route to implementing multi-qubit gates without individual qubit addressing. This is especially appealing for permutation-invariant (PI) gates, whose symmetry is often broken when they are compiled into individually addressed one- and two-qubit gates. Important examples include SWAP, $\sqrt{iSWAP}$, and the n-qubit controlled-Z gate, which is equivalent, up to two single-qubit Hadamard gates, to the multi-qubit Toffoli gate. Motivated by this global-control perspective, we show that all PI unitaries on an arbitrary number of qubits can be realized using the Tavis-Cummings (TC) interaction, the multi-qubit version of the Jaynes-Cummings interaction, together with global uniform z and x fields. Here, the $n$ qubits are identically coupled to a single bosonic mode (oscillator), which is initialized in and returned to its vacuum state. A corollary is that all PI states, including GHZ and Dicke states, can be prepared using the same global control. For the case n=2 qubits, which is particularly important in quantum computing, we also find explicit pulse sequences for implementing all PI qubit unitaries that conserve angular momentum in the z direction, using only the TC interaction and global z fields. This includes controlled-Z, SWAP, and $\sqrt{iSWAP}$.
arXiv:2606.19920v1 Announce Type: cross Abstract: Distributed optimization is a highly scalable and structurally transparent technique to solve multi-agent robotics problems; however, such methods often suffer from the need for highly-specialized, problem-specific hyperparameter tunings. In this work, we propose Deep Coordinator, a deep-unfolding framework that learns to dynamically adjust the hyperparameters of ADMM-DDP, a popular distributed solver for robotics tasks, at solve-time in response to optimizer performance. Our architecture consists of unrolling a fixed number of ADMM-DDP iterations into a neural network with learnable functions between layers mapping the optimizer state to the next hyperparameters. To the best of our knowledge, Deep Coordinator is the first deep-unfolding framework to adapt the penalty parameters of a non-convex optimizer at solve-time; we show that the mainstream supervised approach can yield degenerate solutions when training such models, and propose an unsupervised learning scheme. On simulations with fleets of cars and quadrotors, Deep Coordinator produces trajectories of comparable quality 6.18-9.44x faster than conventional solvers. Furthermore, Deep Coordinator retains its performance benefits when deployed to systems up to 8x larger than trained on.
Metal halide perovskites have emerged as promising semiconductors for light-emitting diodes (LEDs) owing to their excellent luminescence properties1. However, their performance remains limited, primarily owing to the inherent contradiction between ‘high crystallinity’ and ‘small size’ in the in situ synthesis of perovskite nanocrystals on substrates. Here we report efficient blue perovskite LEDs (PeLEDs) achieved via in situ polymerization-driven nanocrystal confinement to synthesize perovskite films composed of high-quality nanocrystals. The in situ-formed polymer network imposes nanoscale spatial constraints during perovskite nanocrystal growth, enabling nanocrystals with small sizes and a high photoluminescence quantum yield of 83%. Furthermore, polymerizable monomers with sufficient coordination sites allow a prolonged lattice rearrangement of perovskite clusters, promoting the crystallinity of the nanocrystals. The synthesized perovskite nanocrystals are utilized in the fabrication of PeLEDs, resulting in an external quantum efficiency of 21.8% at 491 nm, which is among the highest performances in blue PeLEDs. This work simultaneously controls the thermal dynamics of perovskite crystallization and organic ligand reactions, which helps to advance understanding of the effect of ligand engineering on nanocrystal synthesis, benefiting the development of efficient PeLEDs and other optoelectronic technologies. Efficient blue perovskite light-emitting diodes with an external quantum efficiency of 21.8% are achieved through in situ polymerization-driven nanocrystal confinement.
In the context of novel view synthesis, 3D Gaussian Splatting (3DGS) has recently emerged as an efficient and competitive counterpart to Neural Radiance Field (NeRF), enabling high-fidelity photorealistic rendering in real time. Beyond novel view synthesis, the explicit and compact nature of 3DGS enables a wide range of downstream applications that require geometric and semantic understanding. This survey provides a comprehensive overview of recent progress in 3DGS applications. It first reviews the reconstruction preliminaries of 3DGS, followed by the problem formulation, 2D foundation models, and related NeRF-based research areas that inform downstream 3DGS applications. We then categorize 3DGS applications into three foundational tasks: segmentation, editing, and generation, alongside additional functional applications built upon or tightly coupled with these foundational capabilities. For each, we summarize representative methods, supervision strategies, and learning paradigms, highlighting shared design principles and emerging trends. Commonly used datasets and evaluation protocols are also summarized, along with comparative analyses of recent methods across public benchmarks. To support ongoing research and development, a continually updated repository of papers, code, and resources is maintained at https://github.com/heshuting555/Awesome-3DGS-Applications.
Text-rich images often contain privacy-sensitive, transactional, or decision-relevant information. As recent multimodal image generation models become increasingly capable of synthesizing realistic textual content and structured visual designs, detecting AI-generated text-rich images has become an important challenge for digital trust and content authenticity. Existing benchmarks, however, largely focus on object-centric images and provide limited coverage of scenarios where textual semantics and layout organization are central. In this paper, we introduce a multi-domain benchmark for detecting text-rich images generated by OpenAI's GPT Image 2. The benchmark contains 8,602 images across six representative categories: commercial posters, infographics, academic posters, receipts, tables, and UI screenshots. Using this benchmark, we evaluate five representative AI-generated image detectors in a zero-shot setting and analyze their overall, category-wise, and post-processing robustness. Our results show that detector performance is highly domain-dependent: methods that perform well in some categories often fail on others, and even the strongest conventional detector exhibits severe sensitivity to JPEG compression. We further conduct an exploratory evaluation with a multimodal vision-language model, revealing both its promise and its limitations on structured formats. These findings highlight the need for text- and layout-aware detection methods for modern AI-generated images. Our dataset is released at XXX.
Frozen vision-transformer (ViT) foundation-model embeddings increasingly serve as the substrate for downstream chest-radiography (CXR) pipelines, yet where small-scale, low-contrast signal is retained or lost in the frozen forward pass has not been systematically quantified across architectures, pretraining domains, and objectives. We probed five frozen ViTs (RAD-DINO, DINOv2-B/14, DINOv3 ViT-7B, BiomedCLIP, MedSigLIP) and a frozen DINO-pretrained ResNet-50 architectural control across three large CXR cohorts (NIH-CXR14, MIMIC-CXR, Emory-CXR; aggregate pool n=492,724) and ChestX-Det10 (n=3,543; 1,462 small-lesion bounding boxes across Calcification, Nodule, Mass). Each model was evaluated with a small-scale-perturbation panel and a region-aware bounding-box-stratified probe on real lesions, comparing three pooling modes from the same forward pass: classification token (CLS), patch-mean (mean over all final-layer patch tokens), and bounding-box-restricted patch-local. On the perturbation panel, CLS embeddings sat at the chance floor (area under the ROC curve [AUC] 0.500-0.524); patch-mean was indistinguishable from CLS on iso-blur and reticular-fine cells but rose with CLS on larger directional-blur footprints, while disease AUC on globally decided tasks ranged 0.642-0.913. Patch-local probes recovered AUC ~1.0 from the same forward pass (per-model mean improvement +0.412 to +0.488); the ResNet-50 control reproduced the chance floor. On ChestX-Det10, image-level CLS classification showed within-class small-versus-large stratum gaps up to +0.243 AUC; bounding-box-level patch-local pooling on the same forward pass recovered AUC >= 0.899 on every (model x class) cell. Frozen ViT embeddings silently suppress small-scale signal at the global-aggregation step; the signal is recoverable from patch tokens conditional on a region of interest.
arXiv:2507.17188v3 Announce Type: replace-cross Abstract: This paper investigates secure communications in rate-splitting multiple access (RSMA) enabled heterogeneous UAV networks, where multiple UAVs collaboratively serve ground terminals in the presence of eavesdroppers. By jointly considering secrecy rate maximization and propulsion energy consumption minimization, we formulate a multi-objective optimization problem involving UAV trajectory design, service association, power allocation, and secrecy precoding under mobility, collision-avoidance, service-capacity, and communication constraints. The formulated problem is highly non-convex due to the coupling among UAV trajectories, RSMA transmission variables, and secrecy constraints.To address the resulting non-convex and highly coupled optimization problem, we propose a hierarchical optimization framework. The inner layer uses a semidefinite relaxation (SDR)-based S2DC algorithm combining penalty functions and difference-of-convex (D.C.) programming to solve the secrecy precoding problem with fixed UAV positions. The outer layer introduces a Large Language Model (LLM)-guided heuristic multi-agent reinforcement learning approach (LLM-HeMARL) for trajectory optimization. LLM-HeMARL efficiently incorporates LLM-generated expert heuristic policy, enabling UAVs to learn energy-aware, security-driven trajectories without the inference overhead of real-time LLM calls. The simulation results show that our method outperforms existing baselines in secrecy rate and energy efficiency, with consistent robustness across varying UAV swarm sizes and random seeds.
arXiv:2606.18011v1 Announce Type: cross Abstract: Constraint-based causal discovery relies on repeated conditional independence tests, but fast nonparametric tests often sacrifice calibration, especially when variables depend on the conditioning set through nonlinear relationships. We introduce BLITZ (Broad-to-Local Independence Testing via residualiZation), a nonparametric conditional independence test designed to run well under a second while maintaining the accuracy needed for the thousands of queries performed by constraint-based causal discovery algorithms. BLITZ first removes broad smooth dependence on the conditioning set using low-order polynomial regression, then applies a small nonlinear feature map and residualizes those features with shallow tree regressions. The resulting statistic tests residual cross-covariance, with a moment-matched chi-square approximation to the null distribution. We show theoretically that the two-stage design reduces the effective complexity faced by the tree residualizers, allowing shallow trees to control residual conditional-mean bias while avoiding excessive overfitting. In simulations, BLITZ provides better null calibration than fast kernel, random-feature, and regression-based competitors while remaining among the fastest methods tested. In causal discovery experiments on synthetic graphs and flow-cytometry data, BLITZ yields more reliable endpoint orientations among retained adjacencies and competitive structural recovery. These results suggest that broad-to-local residualization is a practical route to calibrated, scalable nonparametric conditional independence testing for causal discovery.
This study examines the effects of rural out-migration and remittance inflows on food consumption outcomes among rural households in the Tigray region of Ethiopia. Utilizing household survey data collected from 521 rural households across three distinct Weredas (districts) (Tahtay Maichew, Kola Tembien, and Kilte-awlaelo). A Binary Probit model was employed to identify factors influencing migration decisions, while an Endogenous Switching Regression (ESR) model was used to estimate the impact of migration on food consumption outcomes while controlling for selection bias and unobserved heterogeneity. Food security was measured using the Food Consumption Score (FCS) and dietary diversity indicators. The empirical results reveal that severe food insecurity is widespread, with over 60% of all surveyed households falling into the "Poor" food consumption category. Descriptive baseline comparisons show that migration and remittance transfers marginally shift the raw average FCS upward from 23.86 to 25.48. However, this impact is profoundly nuanced: remittances serve as an immediate consumption-smoothing safety net but run parallel to a "labor-lost" constraint that reduces own-production capacities, forcing households to rely increasingly on market purchases for staple foods. The findings reveal that migration creates short-term labor shortages in agricultural production; however, remittance inflows substantially improve household food consumption frequencies, particularly for pulses, vegetables, and other nutrient-rich foods. After accounting for self-selection bias and unobserved traits, the rigorous ESR estimates indicate that migration increases the Food Consumption Score of participating households by an average Treatment Effect on the Treated (ATT) of 10.75 points, shifting them into more secure dietary tiers. Moreover, remittances help households mitigate the adverse effects of drought and other shocks by relaxing liquidity constraints and supporting both food purchases and agricultural investments. The study recommends establishing target food security safety nets for non-remittance households, promoting scale-appropriate labor-saving agricultural technologies, expanding traditional communal labor-sharing innovations, and boosting irrigation and agricultural input support programs to enhance rural food security and livelihood resilience.
3D point cloud models suffer significant performance degradation under distribution shifts caused by sensor noise, occlusions, and environmental changes. Test-time adaptation (TTA) has emerged as a practical paradigm for mitigating this issue during inference. Recently, leveraging multi-view augmentation has shown promise in improving 3D TTA performance. However, existing multi-view approaches are often constrained by sequential optimization that treats each view independently. This sequential optimization leads to substantial inference latency due to repetitive optimization steps, making real-time adaptation impractical. To address this, we propose Masked Multi-View Test-Time Adaptation (MAMVI), which replaces sequential optimization with a unified single-step adaptation. Specifically, MAMVI utilizes a hybrid masking strategy that combines fixed ratios for stability with Beta-distributed sampling for diversity. By aggregating losses across multiple views, MAMVI performs adaptation through a single backward pass based on multi-view consensus. Additionally, a confidence-based adaptive learning rate is used to dynamically adjust the adaptation intensity for each sample. Extensive experiments on ModelNet-40C, ShapeNet-C, and ScanObjectNN-C demonstrate that MAMVI achieves state-of-the-art accuracy on ShapeNet-C and ScanObjectNN-C. Moreover, it remains competitive on ModelNet-40C while delivering 4.9-8.9 times faster inference, making it highly suitable for real-time applications. Our code is available at https://github.com/Inseok-kong/MAMVI
While prior research on text-to-image generation has predominantly focused on biases in human depictions, demographic bias in generated objects remains relatively underexplored. We introduce SODA (Stereotyped Object Diagnostic Audit), a novel framework for systematically measuring these biases through automated attribute discovery and three standardized metrics: Base vs. Demographic Divergence (BDS), Cross-Demographic Disparity (CDS), and Visual Attribute Concentration (VAC). Applying SODA to 8,000 images across five state-of-the-art models and eight object categories (e.g., cars), we find that "neutral" prompts produce outputs most visually similar to middle-aged and White people, suggesting these groups are implicitly over-represented in model defaults. Furthermore, demographic cues trigger highly skewed stereotypical outputs: 26.6% of object-model-demographic combinations produce results where all 20 generated images share the exact same attribute value (e.g., rose gold laptops for women). Finally, prompt-level debiasing reduces inter-group disparity but paradoxically collapses within-group diversity, replacing one stereotype with another. SODA offers a practical pipeline for making these implicit associations measurable, serving as a step toward more responsible AI development.
arXiv:2606.15751v1 Announce Type: cross Abstract: Audio-Language Models (ALMs) have shown remarkable success in zero-shot audio classification by aligning audio waveforms with text. Recent efforts to improve downstream performance focus on learning optimal text prompts. However, previous approaches focus on the text encoder, leaving the potential of learnable prompts within the audio encoder unexplored. In this paper, we propose a novel framework that introduces trainable prompts into the audio encoder to capture task-specific acoustic features. We demonstrate that integrating audio-side prompt learning with existing text-side approaches enhances few-shot adaptation. Through extensive experiments across 11 datasets show that integrating our method as a plug-and-play module alongside existing text prompt tuning generally leads to performance improvements. These findings suggest that explicitly modulating the audio representation space effectively complements text-only prompting approaches. The code is available at https://github.com/hyebin-c/aspl.
arXiv:2606.12329v1 Announce Type: new Abstract: AI coding assistants now support a growing share of software work, from quick scripts to production applications. Yet these agents remain largely stateless: each new session re-reads project files, re-derives prior decisions, and - most costly - may repeat debugging attempts that already failed. Reconstructing this context can consume an estimated 5,000-20,000 tokens per session; the bottleneck is often not model capability but missing project memory. We present projectmem, an open-source, local-first memory and judgment layer for AI coding agents. projectmem records development as an append-only, plain-text event log of typed events - issues, attempts, fixes, decisions, and notes - and deterministically projects that log into compact, AI-readable summaries served through the Model Context Protocol (MCP). Beyond storage, projectmem adds a deterministic pre-action gate that warns an agent before it repeats a previously failed fix or edits a known-fragile file. We frame this as Memory-as-Governance: memory that does not merely answer the agent but acts on its next action. The system runs fully offline with no telemetry; its immutable log also serves as a provenance trail for reproducible, auditable AI-assisted development. projectmem ships as a three-dependency Python package (14 MCP tools, 19 CLI commands, 37 automated tests) and is evaluated through a two-month self-study across 10 projects comprising 207 logged events. Source code: https://github.com/riponcm/projectmem.
Genome mining now yields tens of thousands of putative biosynthetic gene clusters (BGCs) per project, yet, separating genuinely novel candidates from rediscoveries of known compounds remains the rate-limiting step before experimental validation. Single-axis prioritisation tools, antiSMASH similarity, BiG-FAM GCF distance, and self-resistance-enzyme (SRE) filters such as ARTS, each surface a different facet of evidence, yet their isolated use systematically over-ranks rediscovery-prone BGCs and overlooks genuinely orphan clusters. We present novelBGC, a web-hosted framework that converts these disparate outputs into two deliberately non-inverse continuous metrics per BGC, a Novelty (N) and a Reference Similarity (RS) score which together define a 2D decision plane that resolves rediscoveries, divergent family members, contig-edge artefacts, and uncharted chemistry with interactive visualisations, with all component weights user-tuneable at submission. Retrospective validation across three independent experimental datasets demonstrates the utility of the framework for candidate prioritization. Within the first 186-BGC SRE-guided cloning study, every confirmed bioactive product fell within the low-to-mid N band whereas 55 high-N (N [≥] 0.50) BGCs were never selected. Moreover, in the other two studies, it correctly prioritised the fully orphan lariocidin BGC of Paenibacillus sp. M2 and the divergent within-family indanopyrrole-A idp BGC of Streptomyces sp. CNX-425. Together, these case studies demonstrate that the joint (N, RS) space facilitates prioritization decisions that are difficult to achieve using any single criterion alone. from identical input data. novelBGC requires no command-line expertise, no local tool installation, and no manual integration of intermediate output formats, addressing a well-documented accessibility barrier for wet-laboratory researchers engaging with genome-mining workflows. novelBGC is freely available at https://project.iith.ac.in/sharmaglab/novelbgc/.
arXiv:2606.15653v1 Announce Type: cross Abstract: The validation of networking and security solutions for the Internet of Things (IoT) requires realistic and reproducible experimental data. However, existing platforms often achieve scalability by replicating a limited set of device types, which restricts profile diversity and fails to capture the heterogeneity of real-world IoT environments. In this paper, we present IoT-Zoo, a container-based testbed designed to support reproducible experimentation through heterogeneous, dataset-driven IoT device profiles. Built upon Containernet, IoT-Zoo automates the deployment of multi-domain scenarios and supports real application protocols such as MQTT and RTSP. The platform provides a single-command interface for environment provisioning and automated traffic capture (PCAP), enabling the generation of consistent traffic baselines and reducing the operational effort required to evaluate networking and security solutions.
arXiv:2606.12853v1 Announce Type: cross Abstract: The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.
Globally, cotton is a highly economically beneficial crop, as the textile industry heavily depends on it. So, the precise identification and detection of cotton leaf disease is crucial for economic stability. The development goal of "CottonLeafVision" is to accurately classify and detect cotton leaf disease. With this goal, we have evaluated multiple pretrained Deep Convolutional Neural Networks, including DenseNet201, InceptionV3, and VGG19 on a publicly available cotton leaf disease image dataset. This image dataset includes seven classes, six disease classes, and one healthy class, collected under various field conditions reflecting real-world challenges. Among these pretrained models, with DenseNet201, we have achieved the highest classification accuracy of 98%. To enhance the model reliability and interpretability, we have implemented different techniques and methods such as Gradient-weighted Class Activation Mapping (Grad-CAM), occlusion sensitivity analysis and adversarial training to increase the noise resistance of the model. Finally, we have developed a prototype in order to utilize the model's capabilities on real life agriculture. This paper shows the deep learning model's capabilities to classify the disease in real-life cotton disease management situations.
arXiv:2605.18817v2 Announce Type: replace Abstract: Diffusion Language Models (DLMs) generate text by iteratively denoising masked token sequences, offering a tradeoff between parallelism and quality compared to autoregressive models. In current practice, the number of tokens decoded per step is controlled by a confidence threshold, and quality degrades monotonically as more tokens are denoised per step. We introduce Multi-token Residual Prediction (MRP), a lightweight module that enables dependency-aware multi-token denoising within a single backbone forward pass. MRP exploits a key property of the denoising process: the logit distributions at adjacent denoising steps are remarkably similar. Rather than running the backbone a second time to obtain the next-step logits, MRP predicts the residual between steps from the backbone's hidden states, effectively denoising more tokens per backbone forward at a fraction of the cost. We apply MRP across the two operating regimes of DLM decoding. In the high-quality-low-throughput static denoising regime, MRP serves as a drafter for speculative decoding: its proposals are verified against the backbone, yielding lossless acceleration of up to 1.4x in SGLang. In the low-quality-high-throughput dynamic denoising regime, MRP instead drives a remasking scheme that revokes over-eager reveals, recovering most of the accuracy lost to aggressive low-threshold decoding and improving accuracy by up to 22.6 points on code generation task HumanEval and 17.7 points on reasoning task GSM8K.
The wide deployment of LLMs has made model alignment necessary to make newly trained models safely and effectively respond to user instructions. Among different methods, inference-time alignment is often cheaper as it intervenes (i.e., offers guidances) only during output generation. Existing proposals apply guidances extracted from certain aligned models without properly assessing their reliability. Nonetheless, our systematic evaluation reveals that guidance effectiveness varies drastically across models; since ineffective guidances lead to further confusion and thus further interventions, the resulting excessive interventions typically indicate poor performance. To make interventions more effective and thus more efficient, we introduce BlendIn, an inference-time alignment framework that shifts from binary decisions to creating hybrid distributions integrating both models' knowledge. BlendIn stabilizes inference-time alignment by performing quality-aware alignment and proportionally weighting each model's contribution based on reliability. Compared with existing works, it preserves beneficial guidance while downweighting unreliable suggestions. BlendIn provides both diagnostic signals and mitigation strategies for misaligned guidance, achieving consistent and up to 50% performance improvement on challenging model pairs. Our code is available at: https://github.com/DecayingSeart/BlendIn.
arXiv:2606.15358v1 Announce Type: cross Abstract: Co-creative AI research increasingly seeks methods capable of representing how interaction dynamics evolve through time. While many existing approaches focus on observable interaction characteristics, interaction metrics, behavioral coding schemes, or activity traces, these methods often struggle to capture higher-order interaction dynamics, including how collaborative processes reorganize, stabilize, regulate, and evolve through time. This paper introduces Cognitive Trajectory Modeling (CTM) as a cognitive theory of interaction dynamics that conceptualizes cognition, interaction, and creative processes as temporally organized trajectories unfolding across cognitively meaningful attractor landscapes. CTM builds upon the theoretical foundations of the Enactive Model of Creativity and Creative Sense-Making (CSM), revisiting the role of sense-making curves and cognitive trajectories in representing co-creative interaction dynamics. We formalize this perspective through the Cognitive Trajectory Principle, which states that temporal representations are only theoretically interpretable as cognitive trajectories when their underlying states possess directional cognitive meaning. Building on this principle, CTM generalizes the notion of cognitive trajectories beyond any particular coding scheme and provides a broader framework for modeling interaction dynamics through trajectories unfolding across meaningful attractor landscapes. We further distinguish cognitive trajectories from interaction traces and situate CTM within a broader hierarchy of cognitive, interaction, and domain dynamics. More broadly, we argue that understanding co-creative systems requires methods capable of modeling how cognition and interaction dynamics unfold through time. CTM provides a foundation for studying interaction dynamics across co-creative AI and human-AI interaction.