Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

02.
arXiv (CS.LG) 2026-06-18

Detecting Hidden ML Training With Zero-Overhead Telemetry

arXiv:2606.19262v1 Announce Type: new Abstract: Hardware-enabled monitoring of GPU workloads underpins many proposals for AI compute governance, but if developers can defeat monitoring mechanisms, such schemes are unworkable. We evaluate the adversarial robustness of GPU workload classification using only zero-overhead, privacy-preserving NVML telemetry: content-agnostic signals that observe physical effects of computation without accessing model weights, training data, or hyperparameters. Across 5 rounds of monitor-evader iteration, we evaluate 20 evasion strategy families on 9 GPU models spanning 4 architecture generations. We develop a classifier that achieves 98.2% binary accuracy at identifying training workloads across the whole corpus, and 43-87% accuracy against the most challenging unexpected workloads even when they are adversarially disguised.

03.
arXiv (CS.LG) 2026-06-11

SwiftCTS: Fast Cross-Design Prediction and Pareto Optimization of Clock Tree Metrics via Few-Shot Calibration

arXiv:2606.11348v1 Announce Type: new Abstract: Clock Tree Synthesis (CTS) is a computationally expensive stage in the physical design flow, requiring iterative EDA tool invocations to navigate a vast configuration space for optimal power, wirelength, and timing skew. Existing machine learning approaches require computationally expensive retraining or fine-tuning cycles to adapt to unseen macro architectures and are architecturally mismatched to the millions of evaluations demanded by exhaustive combinatorial search. We present SwiftCTS, a physics-informed surrogate framework that addresses both limitations simultaneously. By coupling lightweight, physics-grounded statistical features with gradient-boosted ensembles, SwiftCTS trains in under five seconds on a CPU and delivers sub-millisecond inference without GPU support. To handle out-of-distribution (OOD) designs without retraining or fine-tuning, we introduce a K-shot multiplicative calibration mechanism that anchors predictions to just one or two physical reference runs, reducing power prediction error from 24.5\% to 3.3\% and wirelength error from 56.6\% to under 1\% on unseen macros. Integrating this engine with an evolutionary optimizer, SwiftCTS evaluates 100,000 CTS configurations in under ten seconds, yielding Pareto-optimal frontiers that are physically validated within the OpenROAD flow. Closed-loop validation confirms prediction errors below 0.5\% for power and wirelength, and timing skew predictions within five picoseconds on an OOD benchmark, consistently outperforming default tool heuristics across all target metrics. Code publicly available at: \href{https://anonymous.4open.science/r/SwiftCTS-7E6E}{https://github.com/BarsatKhadka/SwiftCTS}

04.
arXiv (CS.LG) 2026-06-11

Renewable Lasso without Batch-Number Constraints: A Gradient-Enhanced Approach

arXiv:2606.11738v1 Announce Type: cross Abstract: We study online estimation for high-dimensional generalized linear models with streaming data. First, for the non-distributed setting, we propose a gradient-enhanced surrogate loss that approximates the cumulative loss using only historical summaries, which modifies and improves upon the existing renewable estimation approach for the same model in the high-dimensional setting, and removes the batch-number constraint in previous studies. We then extend the method to distributed streaming data under the master-client architecture, where batches are partitioned across sites and only summaries (gradient vectors) are exchanged. Instead of directing applying the popular method of Jordan et al. (2019) to the surrogate quadratic loss, our adjusted approach does not require the clients to compute the full surrogate loss. We derive non-asymptotic error bounds under the high-dimensional scaling, without the stringent constraint on the number of batches in the previous studies. Simulation results under linear and logistic models, together with a real-data application, show improved accuracy over existing renewable estimators.

05.
arXiv (CS.CL) 2026-06-24

BehaviorBench: Benchmarking Foundation Models for Behavioral Science Tasks

Foundation models have been increasingly applied to behavioral science domains such as psychology, sociology, and economics. While these models show promise in individual tasks such as survey response prediction and human-subject experiment simulation, there remains no systematic understanding of how well they perform across diverse behavioral science tasks, contexts, and populations. We introduce BehaviorBench, a comprehensive benchmark that evaluates foundation models along four core capabilities: (1) behavior prediction and simulation, (2) strategic decision-making, (3) subject-trait inference, and (4) behavioral knowledge application. Crucially, BehaviorBench evaluates model outputs at both the individual and distributional levels, capturing not only per-subject accuracy but also population-level alignment, an essential requirement for behavioral validity. Leveraging the tasks in BehaviorBench, we further develop Be.FM-1.5, extending the Be.FM family of behavioral foundation models fine-tuned on behavioral data. Our results reveal a considerable gap: proprietary general-purpose models excel at individual-level prediction and knowledge-intensive tasks, whereas behavioral foundation models, fine-tuned on behavioral data, achieve substantially stronger distributional alignment. Notably, Be.FM-1.5 leads on distributional metrics and remains competitive on individual-level metrics, suggesting that proper behavioral adaptation can close the gap. Our results highlight the importance of distributional evaluation, establish BehaviorBench as a foundation for developing and assessing behaviorally aligned AI systems, and demonstrate Be.FM-1.5's potential for a broad range of behavioral science studies. Our BehaviorBench and Be.FM-1.5 models can be accessed via https://umich-foreseer.github.io/behaviorbench/.

06.
bioRxiv (Bioinfo) 2026-06-15

AliceDB database and pipeline for identification of natural protein variants based on mass spectrometry measurement data

The natural variation that distinguishes living organisms within a single species is currently being studied intensively, primarily at the genetic level. Unfortunately, studies of natural variants at the level of protein gene products are not very common, mainly due to the lack of appropriate databases and bioinformatics tools. The main research technique used to study proteomes/peptidomes is mass spectrometry (MS). A classic method for interpreting raw mass spectrometry data in proteomic/peptidomic studies involves the use of databases containing representative (canonical) sequences that define the proteome of the organism under study. In this paper, we present the AliceDB database, which contains information on over 7 million natural variants of protein sequences described in the scientific literature for Homo sapiens. The data contained in the AliceDB database can be utilized using widely available and commonly used software for interpreting proteomic data. Test results regarding the use of the AliceDB database for the interpretation of proteomic data indicate that accounting for the presence of natural variants increases both the number and quality of identified proteins. Furthermore, it is easy to identify protein sequence variants that may, for example, be of significance in medicine.

07.
arXiv (quant-ph) 2026-06-24

On the localization transition from MAA to AA models

arXiv:2606.24720v1 Announce Type: cross Abstract: Despite their potential similarity between the mosaic Aubry-André (MAA) and AA models, the MAA model allows mobility edges (MEs), whereas the AA model does not. Here we develop a new double quasiperiodic MAA (DMAA) model consisting of one primitive MAA with nonzero even-site potentials and the other modified one with both nonzero odd-site potentials and a tunable amplitude factor, to reveal how localization transitions evolve from MAA to AA models. Interplays and competitions among the extended, critical and localized states arising from superpositions of double quasi-periodic MAA potentials enable new twice and multiple localization-delocalization transitions besides the original single localization transition. Our numerical calculations on inverse participation ratio, normalized participation ratio, fractal dimension and real-space wavefunction distribution confirm such localization features. The continuum model simulations on the experimental polariton modes also yield consistent results and hence validate their experimental feasibility. The constructed DMAA model provides a new framework for studying the localization transition processes between two analogous quasiperiodic models and broadens the understanding of Anderson localization.

08.
arXiv (CS.AI) 2026-06-19

A Multi-Agent system for Multi-Objective constrained optimization

arXiv:2606.20236v1 Announce Type: new Abstract: Many decision-making problems in computing and networking systems can be naturally formulated as cost-minimization problems under performance constraints. In dynamic environments, reinforcement learning (RL) is often used to solve such problems at runtime by embedding both costs and constraint violations into a single scalar reward through weighted penalty terms, following a Lagrangian-inspired formulation. However, in this context the behavior of the learned policy critically depends on the choice of these weights, which are typically selected manually. This makes it difficult to identify an appropriate trade-off between optimizing the primary objective and effectively avoiding constraint violations, particularly in non-stationary environments where their relative importance may change. This paper presents MAMO (Multi-Agent system for Multi-Objective constrained optimization), an approach to tackle this balancing problem through multi-agent RL. MAMO decouples task execution from objective design by formulating the selection of reward weights as a learning problem, providing a !rst step towards more autonomous and robust RL-based solutions for constrained optimization problems in dynamic environments.

09.
arXiv (CS.CV) 2026-06-15

Explaining RhythmFormer: A Systematic XAI Analysis of Periodic Sparse Attention for Remote Photoplethysmography

Remote photoplethysmography (rPPG) transformers achieve low heart-rate error on benchmarks, yet their decisions remain opaque–a growing concern as rPPG moves toward clinical heart rate estimation. Existing rPPG XAI is dominated by qualitative heatmap inspection without quantitative faithfulness metrics or physiology-grounded validation, leaving a gap between visual plausibility and auditable evidence. We address this gap. First, we adapt four attribution methods (raw attention, rollout, flow, Beyond Intuition) to RhythmFormer's bi-level routing attention with top-$k$ selection. Second, we introduce a skin coverage metric quantifying how much attribution mass falls on skin regions. Third, we adapt the SaCo faithfulness coefficient from its original classification setting to rPPG regression by using the MAE between original and perturbed predicted rPPG waveforms as the perturbation impact. Applying these tools, we quantify a multi-hop leakage effect under sparse top-$k$ routing: attention rollout and flow almost completely restores the connections that individual refined-attention layers explicitly set to zero. Beyond Intuition mitigates this via its value-projection-weighted rollout and gradient-supported mask, attaining the highest median refined skin coverage ($0.83$ vs. $0.57$ for vanilla rollout) and faithfulness ($F=0.92$) among the evaluated methods on UBFC-rPPG. Validation across diverse datasets and model variants is needed. A case study on a low-SaCo outlier further shows all four methods recovering consistently once an artefactual region is replaced, suggesting consistent SaCo behavior across attribution families in this illustrative case. Together, these metrics move XAI for rPPG toward auditable numerical evidence about spatial alignment and perturbation faithfulness, i.e. trustworthy rPPG XAI.

10.
arXiv (CS.AI) 2026-06-11

SAGE: Scalable AI Governance & Evaluation

arXiv:2602.07840v4 Announce Type: replace-cross Abstract: Evaluating relevance in large-scale search systems is fundamentally constrained by the governance gap between nuanced, resource-constrained human oversight and the high-throughput requirements of production systems. While traditional approaches rely on engagement proxies or sparse manual review, these methods often fail to capture the full scope of high-impact relevance failures. We present SAGE (Scalable AI Governance \& Evaluation), a framework that operationalizes high-quality human product judgment as a scalable evaluation signal. At the core of SAGE is a bidirectional calibration loop where natural-language Policy, curated Precedent, and an LLM Surrogate Judge co-evolve. SAGE systematically resolves semantic ambiguities and misalignments, transforming subjective relevance judgment into an executable, multi-dimensional rubric with near human-level agreement. To bridge the gap between frontier model reasoning and industrial-scale inference, we apply teacher-student distillation to transfer high-fidelity judgments into compact student surrogates at 92$\times$ lower cost. Deployed within LinkedIn Search ecosystems, SAGE guided model iteration through simulation-driven development, distilling policy-aligned models for online serving and enabling rapid offline evaluation. In production, it powered policy oversight that measured ramped model variants and detected regressions invisible to engagement metrics. Collectively, these drove a 0.25\% lift in LinkedIn daily active users.

11.
arXiv (CS.LG) 2026-06-16

Robust Transformer-Based One-Step Stock Index Forecasting via Shifted Data Augmentation

arXiv:2606.15701v1 Announce Type: new Abstract: Transformers have shown remarkable success in sequence modeling, yet their direct application to financial time series remains challenging due to noisy signals, short-memory dynamics, and distributional shifts. This paper proposes a modified Transformer architecture for one-step stock index forecasting, combined with advanced learning-rate scheduling and a novel Shifted Data Augmentation (SDA) technique. We evaluate the proposed framework on two benchmark stock index datasets, VN30 and S&P 500. Experimental results demonstrate that cosine annealing with warmup consistently improves forecasting accuracy over the generalized inverse-power scheduler. Furthermore, SDA substantially reduces forecasting errors and run-to-run variability while improving robustness to hyperparameter selection. The combination of cosine annealing scheduling and SDA achieved the best performance on both datasets, indicating that data augmentation can play a more important role than increasing model complexity in Transformer-based financial forecasting. These findings provide a practical and computationally efficient approach for robust stock index forecasting in noisy financial environments.

12.
arXiv (CS.CL) 2026-06-19

Beyond the GUI Paradigm: Do Mobile Agents Need the Phone Screen?

Recent advances in mobile agents are dominated by the GUI paradigm, in which agents perceive UI information and emit screen interactions. However, mobile platforms also expose a command-line interface (CLI) that provides direct access to device services and data. We argue CLI deserves first-class consideration alongside GUI. We evaluate three coding agents (Claude Code, Terminus-2, mini-swe-agent) across four model APIs on AndroidWorld and MobileWorld without any mobile-specific post-training, comparing against three reproducible GUI baselines (GUI-Owl-1.5-32B, MAI-UI, Qwen3-VL-32B). Claude Code (Opus 4.7) reaches 71.8\% and 51.9\%, outperforming every reproducible GUI baseline (69.3/68.1/57.8\% on AndroidWorld; 43.2/26.3/13.3\% on MobileWorld), while every other CLI configuration remains competitive. To establish the paradigm's ceiling, we provide oracle CLI solutions that reach 88.8\% on AndroidWorld (103/116 tasks CLI-solvable) and 86.3\% on MobileWorld (101/117 tasks CLI-solvable), indicating substantial room for future improvement. To cover everyday user intents beyond the GUI scope, we introduce the CLI-Advantage Task Suite, comprising 45 templates across five categories: bulk operations, multi-condition filtering, aggregation, cross-app workflows, and hidden device state. Every CLI agent outperforms every GUI baseline in all five categories, with substantially fewer steps per task (10.7 vs.\ 18.6). To support future research on mobile CLI agents, we will open-source agent implementations, oracle solutions, the CLI-Advantage suite, and evaluation infrastructure.

13.
medRxiv (Medicine) 2026-06-23

Isolation And Characterization Of Bacteria Associated With Urethritis In Women Within Child Bearing Age Attending Local African Health Clinics

Background: Urethritis in women of childbearing age constitutes a significant but underreported burden of reproductive morbidity in Sub-Saharan Africa, where diagnostic constraints often necessitate suboptimal syndromic management. Methods: To identify the localized etiological profile, mid-stream urine and urethral swab specimens were prospectively collected from symptomatic women attending local clinics, subjected to standard microbiological culture, and characterized using rigorous phenotypic and biochemical diagnostic protocols. Results: Microbiological analysis successfully isolated a high prevalence of both Gram-negative and Gram-positive uropathogens, predominantly Escherichia coli, Staphylococcus aureus, and Klebsiella pneumoniae, demonstrating distinct phenotypic traits characteristic of the regional microbial ecology. Conclusion: The pronounced isolation of these specific bacterial agents highlights the critical inadequacy of generalized empirical treatments and underscores the urgent need for tailored diagnostic criteria in resource-limited African healthcare settings.

14.
medRxiv (Medicine) 2026-06-17

Cost-effectiveness of measles rapid diagnostic tests for replacing or expanding laboratory testing in Ethiopia

Background: In low- and middle-income countries, laboratory testing to rapidly detect measles outbreaks is limited by infrastructure availability and high costs. This study estimates the potential impact and cost-effectiveness of measles rapid diagnostic tests (RDTs) if implemented nationally in Ethiopia to either replace or expand current testing. Methods: An agent-based model to simulate measles outbreaks was calibrated to Ethiopian measles surveillance data. Modelled outbreak outcomes were aggregated over a 10-year period. Scenarios included using RDTs to (1) replace laboratory testing; (2) replace epidemiological linkage; and (3) increase case detection, in addition to replacing laboratory testing and epidemiological linkage. Testing and outbreak response costs (in 2025 US$) were obtained from Ethiopian Public Health Institute from a government perspective. Total costs and disability-adjusted life years (DALYs) for each scenario were compared to baseline. Results: All scenarios were cost saving compared to baseline. Replacing laboratory testing with RDTs saved US$4.2M (3.2M-4.9M) over 10-years, but due to very low testing rates the benefits of eliminating laboratory testing delays were offset by missed cases from the lower RDT sensitivity, leading to similar outbreak detection times and DALYs. Replacing epidemiological linkage with RDTs had similar DALYs but increased the cost savings to US$9.7M. Using RDTs to double case detection reduced outbreak detection time from 113 to 80 days, averted 17,000 DALYs, and saved US$4.3M. Conclusions: In Ethiopia, use of measles RDTs could be cost saving, and if used to expand testing could prevent measles infections through faster outbreak detection and response.

15.
arXiv (CS.AI) 2026-06-16

Stable Menus of Public Goods: AI-Enabled Progress

作者:

arXiv:2606.16989v1 Announce Type: cross Abstract: Using an open problem from the EC 2025 paper "Stable Menus of Public Goods" as a testbed, we conduct experiments to understand the effectiveness of different AI-for-EconCS research workflows. Specifically, we study three questions: Does providing human intuition in the prompt help? Does automated multi-turn interaction help? And, does an LLM outperform a first-year PhD student? Regarding the first two questions, we provide evidence for the following workflow suggestions: (1) prompting with human intuition can encourage the LLM to have better "taste", (2) multi-turn workflows help when the pipeline encourages "ambitious" steps. Regarding the third question, using an unpublished manuscript written by the paper's senior authors prior to collaborating with the first-year PhD student, we compare the effectiveness of the LLM with that of the first-year PhD student, and find that the LLM is slightly less effective.

16.
arXiv (CS.AI) 2026-06-17

Lean4Agent: Formal Modeling and Verification for Agent Workflow and Trajectory

arXiv:2606.06523v2 Announce Type: replace Abstract: Equipping Large Language Models (LLMs) to execute reliable multi-step workflows has become a central challenge in artificial intelligence. Despite recent advances in LLMs' agentic capabilities, most agent systems still lack formal methods for specifying, verifying, and debugging their workflow and execution trajectories. This challenge mirrors a long-standing problem in mathematics, where the ambiguity of natural languages (NLs) motivates the development of formal languages (FLs). Inspired by this paradigm, we propose **Lean4Agent**, to the best of our knowledge, the first framework that uses Lean4, a dependent-type FL to model and verify agent behavior. **Lean4Agent** launches **FormalAgentLib**, an extensible Lean4 library for formally modeling and verifying agent workflows' semantic consistency under explicit assumptions, and enabling localization of execution-time failures revealed by trajectories. Building on **FormalAgentLib**, we further develop **LeanEvolve**, which applies results in **FormalAgentLib** to revise workflows to enhance its capability. Extensive experiments on a hard problem subset of SWE-Bench-Verified and a subset of ELAIP-Bench across 5 leading LLMs indicate that the verification-passing workflows outperform the failing ones by an average of **11.94%**, and **LeanEvolve** further improves SWE performance by **7.47%** on average. Furthermore, **Lean4Agent** establishes a foundation for a new field of using expressive dependent-type FL to formally model and verify agent behavior.

17.
medRxiv (Medicine) 2026-06-10

Estimating COVID-19 Cumulative Incidence from Seroprevalence Surveys accounting for Time-Varying Seroreversion: A Fully Bayesian Methodology

Seroprevalence surveys reveal the extent of humoral immunity against pathogens such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), and under some circumstances represent cumulative incidence of prior infection. However, antibody waning - or seroreversion - biases these estimates by reducing assay sensitivity in a time-varying manner. Because assay sensitivity decays over time, naively using serosurveys can substantially bias estimates of SARS-CoV-2 cumulative incidence and fatality rates. The Bayesian assay-specific, time-varying sensitivity adjustment developed in this paper can reliably correct for this bias and account for the delay between infection and serosurvey. In seroprevalence studies conducted in the United States in 2020, adjusting for time-varying sensitivity increased cumulative incidence by up to 1.4-fold, with an adjustment of 1.08 for a national study. Our estimates contrast with a previously published 2-fold adjustment that did not account for assay design. This suggests that previous analyses overestimated cumulative incidence by applying seroreversion corrections that did not account for assay-specific effects, or underestimated cumulative incidence by not applying seroreversion corrections. These biases imply fatality rate underestimation and overestimation, respectively. Our model provides a framework for design-specific time-varying sensitivity corrections in seroprevalence surveys for other pathogens.

18.
arXiv (CS.CV) 2026-06-16

MambaH-Fit: Rethinking Hyper-surface Fitting-based Point Cloud Normal Estimation via State Space Modelling

We present MambaH-Fit, a state space modelling framework tailored for hyper-surface fitting-based point cloud normal estimation. Existing normal estimation methods often fall short in modelling fine-grained geometric structures, thereby limiting the accuracy of the predicted normals. Recently, state space models (SSMs), particularly Mamba, have demonstrated strong modelling capability by capturing long-range dependencies with linear complexity and inspired adaptations to point cloud processing. However, existing Mamba-based approaches primarily focus on understanding global shape structures, leaving the modelling of local, fine-grained geometric details largely under-explored. To address the issues above, we first introduce an Attention-driven Hierarchical Feature Fusion (AHFF) scheme to adaptively fuse multi-scale point cloud patch features, significantly enhancing geometric context learning in local point cloud neighbourhoods. Building upon this, we further propose Patch-wise State Space Model (PSSM) that models point cloud patches as implicit hyper-surfaces via state dynamics, enabling effective fine-grained geometric understanding for normal prediction. Extensive experiments on benchmark datasets show that our method outperforms existing ones in terms of accuracy, robustness, and flexibility. Ablation studies further validate the contribution of the proposed components.

19.
arXiv (quant-ph) 2026-06-15

All about quantum error correction: distillation, mitigation, self-correction and beyond

作者:

arXiv:2606.14034v1 Announce Type: new Abstract: In this work, it is shown that many quantum error-manipulating techniques, such as distillation, error mitigation, and dynamical decoupling, are special cases of the most general framework for quantum error correction. This unifying perspective is achieved by extending quantum error correction to include state-adaptive and channel-adaptive settings, as well as multi-stage coding scenarios. Based on this insight, a model of self-correcting quantum memory is also proposed. This work clarifies the relationship among these techniques and illustrates, through explicit constructions, how the unified perspective can guide the design of reliable quantum information systems.

20.
arXiv (CS.CV) 2026-06-18

UniTemp: Unlocking Video Generation in Any Temporal Order via Bidirectional Distillation

Autoregressive video diffusion models have emerged as a promising approach for long video generation, achieving strong performance in streaming settings. However, existing methods are restricted to forward temporal generation, whereas practical video creation often requires flexible generation order, e.g., conditioning on future context to extend backward, or on both past and future context for inbetween generation. We bridge this gap by training an autoregressive model that supports generation in arbitrary temporal directions. A key technical challenge arises from the Causal 3D VAE widely used in video diffusion models, which encodes latents strictly conditioned on past context. While suited for forward generation, this causal structure causes inter-block discontinuities when generation proceeds backward. To address this, we introduce blockwise anchor latents, a set of auxiliary latents that restore the missing past context at block boundaries during backward generation. Built on this design, we propose UniTemp, a bidirectional distillation framework that trains a single autoregressive student model for any-direction video generation. At inference time, UniTemp conditions on arbitrary past and/or future frames, improving controllability for both bidirectional and inbetween generation. Experiments show that UniTemp maintains competitive performance on short and long video generation compared to forward-only methods, while enabling diverse workflows such as bidirectional video extension, inbetween generation, looping video generation, scene transition, and visual story generation. Project website: https://lzhangbj.github.io/projects/unitemp/

21.
arXiv (CS.CV) 2026-06-18

Multi-Modal Hyper-Graph Fusion for Low-Light Crowd Counting

Crowd counting is a fundamental task in computer vision. However, crowd counting in low-light environments remains largely underexplored, despite its practical importance in the real world. Existing methods mainly focus on well-lit scenes or rely on single-modality Red-Green-Blue (RGB) representations, which often become unreliable under extreme darkness and complex non-uniform illumination. To handle this problem, we construct three new low-light crowd counting benchmarks, which consist of two synthetic datasets, SHA\_Dark and SHB\_Dark, and a real-world benchmark LC-Crowd (Low-light Crowd Dataset). Inspired by Retinex-based physical modeling, we introduce depth and Canny edge cues as complementary geometric and structural priors to enhance the intrinsic reflectance representation under low-light conditions. We propose a Multi-Modal Hyper-Graph Fusion module, which formulates RGB appearance, depth geometry, and edge structure cues as nodes in a unified hyper-graph and explicitly captures their high-order complementary relationships via dynamic hyperedge construction and message passing. Furthermore, to adaptively allocate computation in dense prediction, we propose a Deformable Rectangular Sparse Attention (DRSA) module, which concentrates computation on informative regions through anchor-aware estimation and adaptive rectangular window modeling. Based on these designs, we develop a unified Low-Light Counting Network (LCNet) for robust low-light crowd counting. Extensive experiments on three benchmarks demonstrate that the proposed method achieves the best overall performance against existing state-of-the-art (SOTA) methods. The code is in the supplementary material. The datasets will be made public upon acceptance.

22.
arXiv (quant-ph) 2026-06-15

Collision models for open quantum systems coupled to finite environments

arXiv:2606.14163v1 Announce Type: new Abstract: We study a system qubit repeatedly interacting with the same environmental qubit, with a reservoir acting on the environment between collisions via a completely positive, trace-preserving map. We show that complete suppression of system–environment correlations uniquely requires a full environmental reset, recovering a semi group dynamics with a time-independent Gorini–Kossakowski–Sudarshan–Lindblad generator, whereas a partial reset yields a continuous transition between Markovian and non-Markovian regimes governed by a single dimensionless relaxation parameter. For a resonant excitation-exchange interaction, we obtain exact closed-form expressions for the Bloch-vector dynamics for both a generalized depolarizing channel and a generalized amplitude-damping channel acting as the reservoir-induced map. Using the Breuer–Laine–Piilo measure and a Choi-matrix CP-divisibility witness, we identify three distinct dynamical regimes across the parameter space: CP-divisible Markovian dynamics, CP-indivisible but P-divisible dynamics, and non-P-divisible non-Markovian dynamics. The boundaries between these regimes, and the structural differences between uniform and anisotropic environmental relaxation, are characterized numerically.

23.
PLOS Computational Biology 2026-06-02

PepAnno: A structure-aware deep learning framework for bioactive peptide prediction, structural visualization, and physicochemical profiling

作者:

by Enyan Liu, Yueming Hu, Liya Liu, Yifan Chen, Shilong Zhang, Sida Li, Haoyu Chao, Luyao Xie, Yi Shen, Liangwei Wu, Julio Raúl Fernández Massó, Ming Chen Peptides are gaining prominence as therapeutic candidates due to their diverse physiological functions and structural simplicity. Although multiple computational tools exist for bioactive peptide prediction, many suffer from limitations such as non-intuitive interfaces, sequence-only representations, insufficient structural awareness, restricted interpretability, or fragmented analysis workflows, leading to reduced research efficiency and higher costs. To address these challenges, we present PepAnno (https://bis.zju.edu.cn/pepanno/), a comprehensive and user-friendly web server for multi-functional peptide annotation. PepAnno is powered by a novel structure-aware, multi-view geometric deep learning framework that integrates pre-trained sequence embeddings with predicted 3D structural graphs through a dual-stream architecture combining a Transformer and a GATv2 network. A cross-modal attention mechanism is employed to effectively fuse semantic and geometric representations, enabling accurate multi-task prediction across 7 key bioactivities, including antimicrobial and anticancer properties. Comprehensive evaluation on seven curated bioactivity datasets demonstrates that PepAnno achieves robust and competitive predictive performance across tasks, consistently outperforming or matching existing methods in terms of discrimination and stability. Beyond functional prediction, PepAnno provides automated calculation of physicochemical properties, structure visualization, and access to an integrated repository of peptide-related databases and tools. By enabling one-click peptide annotation, PepAnno offers an efficient and interpretable solution for large-scale peptide analysis and facilitates downstream experimental design and peptide-based drug discovery.

24.
medRxiv (Medicine) 2026-06-22

Toward less intrusive pubertal assessment: longitudinal evaluation of tanner and non-tanner metrics in East African adolescents

Background: Accurate pubertal assessment is essential in pediatric endocrinology and adolescent health research. While Tanner staging remains the gold standard, its subjective nature and invasive genital examination limit feasibility and acceptability, especially in longitudinal studies and culturally sensitive settings. This study evaluated less intrusive pubertal assessment combinations that maintain discriminative accuracy. Methods: We conducted a longitudinal study among 200 uncircumcised, sexually naive males aged 15-17 years in Southwestern Uganda, with quarterly follow-up over three years. Clinicians assessed Tanner staging metrics (pubic hair, testicular volume, penile length, scrotal color), axillary hair, and serum testosterone. Markov transition models estimated Tanner stage progression. Ordinal logistic regression and area under the receiver operating characteristic curve (AUC) analyses quantified discriminative performance of individual and combined metrics. Results: At baseline, participants were distributed across Tanner stages II (6.0%), III (13.5%), IV (55.0%), and V (25.5%). Among individual metrics, pubic hair distribution best predicted overall Tanner stage (AUC=0.867), while penile length was least predictive (AUC=0.833). The full four-metric Tanner model achieved high discrimination (AUC=0.993). However, a less intrusive combination of pubic hair and scrotal color achieved comparable discrimination (AUC=0.942), improving to AUC=0.953 with axillary hair and age. Markov modeling demonstrated frequent bidirectional transitions between Tanner stages IV and V, reflecting variability in longitudinal staging. Conclusions: A minimally intrusive assessment combining pubic hair, scrotal color, axillary hair, and age reliably predicts pubertal stage, offering an acceptable alternative to traditional Tanner staging for research and surveillance contexts where genital manipulation is impractical or unethical.

25.
arXiv (quant-ph) 2026-06-17

Singular Vector Finite Element Basis Functions for Tetrahedra in Complex Electromagnetic Geometries

arXiv:2606.18140v1 Announce Type: cross Abstract: Electromagnetic finite element method (FEM) implementations using traditional basis functions struggle to accurately represent field behavior near singular features such as conducting wedges. To combat this, specialized singular basis functions have been introduced to directly model the singular fields in these regions, leading to substantially improved performance. While these efforts have been pursued extensively in 2D, few functions have been developed for 3D elements. In this work, we develop basis functions for this in tetrahedra. Unlike prior functions, these basis functions are additive, meaning they are included alongside the standard vector basis functions to achieve more robust performance. Further, these functions are designed to be adaptable to tetrahedra touching several unique singular features by using combinations of basis functions singular with respect to each node and edge in the element, making them applicable to highly complex geometries. Higher-order interpolatory versions of the basis functions for modeling singular behavior with greater accuracy are also provided. These basis functions lead to substantial improvements in accuracy relative to the standard basis functions, and allow otherwise expensive simulations to be performed at far lower costs. As an application example, we perform simulations to extract critical quantities for designing superconducting qubits that significantly depend on the behavior of singular fields. In Ansys HFSS, this took 21.27 hours and a peak memory usage of 6.23 TB with 800 processors available, while using our singular basis functions achieved comparable results in 196 seconds while using 27.24 GB of memory and only 16 processors. Due to these benefits, our singular basis functions could be applied to enable design optimization of electromagnetic geometries with dominantly singular behavior, such as superconducting qubits.