Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CL) 2026-06-11

TokenRatio: Principled Token-Level Preference Optimization via Ratio Matching

Direct Preference Optimization (DPO) is a widely used RL-free method for aligning language models from pairwise preferences, but it models preferences over full sequences even though generation is driven by per-token decisions. Existing token-level extensions typically decompose a sequence-level Bradley-Terry objective across timesteps, leaving per-prefix (state-wise) optimality implicit. We study how to recover token-level preference optimality using only standard sequence-level pairwise comparisons. We introduce Token-level Bregman Preference Optimization (TBPO), which posits a token-level Bradley-Terry preference model over next-token actions conditioned on the prefix, and derive a Bregman-divergence density-ratio matching objective that generalizes the logistic/DPO loss while preserving the optimal policy induced by the token-level model and maintaining DPO-like simplicity. We introduce two instantiations: TBPO-Q, which explicitly learns a lightweight state baseline, and TBPO-A, which removes the baseline through advantage normalization. Across instruction following, helpfulness/harmlessness, and summarization benchmarks, TBPO improves alignment quality and training stability and increases output diversity relative to strong sequence-level and token-level baselines.

02.
arXiv (CS.AI) 2026-06-12

Contextual Invertible World Models: A Neuro-Symbolic Agentic Framework for Colorectal Cancer Drug Response

arXiv:2603.02274v3 Announce Type: replace-cross Abstract: Precision oncology is currently limited by the small-N, large-P paradox, where high-dimensional genomic data is abundant but pharmacological response samples are sparse. While deep learning achieves predictive accuracy, it frequently fails to provide the mechanistic clarity required for clinical adoption. We present the Contextual Invertible World Model (CIWM), a Neuro-Symbolic Agentic Framework that bridges this gap by integrating a quantitative machine learning emulator with a Large Language Model reasoning layer. Utilising a stringently curated, high-fidelity data engineering pipeline on the Sanger GDSC dataset (\( N=83 \)), we isolate true biological signals from in vitro artifacts to establish a rigorous baseline predictive correlation for complex transcriptomics (\( r=0.268 \)). Through Inverse Reasoning, we perform in silico CRISPR perturbations across the colorectal landscape. The framework autonomously overturns classical mechanistic assumptions, identifying a hierarchical dominance of mutant KRAS over the APC/Wnt-axis in driving 5-fluorouracil resistance (\( \Delta=-0.0469 \)) via a "KRAS Shield" mapped to MAPK/PI3K networks. Furthermore, the agentic layer identified a "PIK3CA Paradox", revealing that repairing PIK3CA inadvertently increases chemoresistance (\( \Delta=+0.0085 \)) by triggering a compensatory feedback loop that hyperactivates the dominant MAPK survival pathway.

03.
arXiv (quant-ph) 2026-06-17

Unveiling Hierarchical Invariants in Multiphoton Linear Optics

arXiv:2506.12857v2 Announce Type: replace Abstract: Linear optical networks driven by quantum states of light are important building blocks of photonic quantum technologies. They access large bosonic Hilbert spaces through multiphoton interference. At the same time, their dynamics are generated by single-particle mode transformations, thereby defining a highly structured subset of multiphoton unitaries and setting boundary on linear optics capability. To elucidate this boundary, we reveal an underlying fine-grained symmetry structure that partitions the multiphoton operator space into invariant subspaces and generates a hierarchy of invariants. We experimentally confirm the conservation of high-order invariants and demonstrate their operational utility in characterizing state reachability and the metrological capability of multiphoton probes. Our framework provides a symmetry-based perspective for understanding and harnessing structured multiphoton dynamics across photonic quantum technologies.

04.
arXiv (CS.LG) 2026-06-15

DTVEM-RE: A Hierarchical Random-Effects Extension of the Differential Time-Varying Effect Model for Person-Specific Multi-Lag Estimation in Intensive Longitudinal Data

arXiv:2606.14116v1 Announce Type: new Abstract: The Differential Time-Varying Effect Model (DTVEM) of Jacobson et al. (2019) is a popular tool for finding the best time lag in intensive longitudinal data, but it assumes everyone shares the same lag structure. The original authors named fixing this as future work, and it clashes with the premise of modern clinical research, which is that people differ. We present DTVEM-RE, an extension that lets each person have their own lag coefficients, with two versions of the confirmatory step: a discrete-time hierarchical Bayesian VAR in Stan, which pools across people and gives calibrated uncertainty, and a continuous-time per-person Ornstein-Uhlenbeck model in ctsem, which handles unevenly spaced beeps directly. We report four results. A simulation shows the Bayesian version recovers the between-person spread tau_a with bias below 0.01 and coverage of 90 to 93 percent. On the Fisher et al. (2017) EMA dataset (N=40), person-specific lag-1 effects vary by an order of magnitude across three mood items, the Bayesian and GAMM estimates agree closely (r=0.87 to 0.92), and DTVEM-RE gives the best one-step-ahead prediction among four discrete-time methods. A multi-lag version shows all nine tau_k values have credible intervals excluding zero, and the lag where people differ most changes across items, something lag-1-only methods like mlVAR cannot detect. Finally, the two versions agree almost exactly on person-specific lag-1 estimates (r >= 0.995), differing only as shrinkage predicts. DTVEM-RE is, to our knowledge, the first person-specific implementation of DTVEM-style lag detection, and it contains standard DTVEM as a special case.

05.
arXiv (CS.CV) 2026-06-17

Contact-Based Fringe Projection Profilometry for High-Resolution 3-D Surface Measurement of Reflective and Transparent Objects

This paper presents a contact-based 3-D surface measurement method based on a Digital Fringe Projection (DFP) system, belonging to the vision-based tactile sensing family pioneered by the commercially successful GelSight sensor. Such sensors have proven effective for robotic fingertip manipulation and contact sensing. However, because GelSight employs photometric stereo with RGB LEDs, it does not measure absolute depth directly but instead infers it by integrating estimated surface gradients, which can accumulate reconstruction errors; in addition, it becomes increasingly difficult to calibrate as the sensing area grows, and its depth accuracy is challenged on highly reflective or transparent objects. To overcome these drawbacks, we propose a fringe-projection-based contact measurement technique that performs triangulation-based 3-D reconstruction on a coated silicone contact surface, providing dense per-pixel surface geometry and full-field 3-D shape measurement over the contact region. By integrating high-accuracy digital fringe projection into the sensor, our approach simplifies calibration over larger areas and enhances depth precision for complex surfaces. Experimental results, including a direct comparison with a GelSight Mini sensor, a sphere-fitting accuracy evaluation, and an uncertainty analysis, confirm that the proposed method significantly improves the accuracy and stability of structured-light-based 3-D measurements, allowing reliable reconstruction of objects with diverse optical properties.

06.
arXiv (quant-ph) 2026-06-17

An energy-based uncertainty principle and low-energy state preparation

作者:

arXiv:2603.15495v2 Announce Type: replace Abstract: Preparing low-energy states of many-body Hamiltonians is a central challenge in quantum computing, quantum complexity, and condensed matter physics. Existing approaches often get trapped in suboptimal states such as high-energy eigenstates or, more generally, low-variance states that resist further energy reduction. In this work, we explore a different perspective: instead of optimizing with respect to a single Hamiltonian, we leverage the fact that many systems admit families of Hamiltonians that share similar low-energy subspaces but differ at higher energies. We show that this redundancy can be turned into an algorithmic resource by establishing an energy-based uncertainty principle, which implies that these Hamiltonians cannot simultaneously admit low-variance states at higher energies. This suggests a simple strategy of alternating energy-lowering steps across such Hamiltonians, which we investigate numerically on several models. We also introduce a sparse variant where the uncertainty principle yields quadratically larger variance at higher energies, leading to more pronounced energy change. Overall, this work suggests a range of open questions at the interface of random matrix theory, local Hamiltonians and low-energy state preparation, aimed at understanding when such approaches are practical and how they can be analyzed rigorously.

07.
arXiv (CS.CV) 2026-06-12

CD-RCM: Generalizable Continuous-Depth Novel View Synthesis for Reflectance Confocal Microscopy

Reflectance confocal microscopy (RCM) provides noninvasive, cellular-resolution "optical biopsies" of human skin in vivo by acquiring en-face images at successive depths, forming a sparse z-stack. Due to optical limitations, these stacks are anisotropic 3D volumes with lateral resolution (0.5 $\mu$m) $\sim$6 times higher compared to axial resolution, which is defined by the optical sectioning (3 $\mu$m), limiting the interpretation of tissue. Our goal is to provide continuous-depth visualization by interpolating intermediate sections and making the 3D volume isotropic. Such a representation permits arbitrary-direction sectioning, including histopathology-like cross-sectional examination, without requiring per-patient optimization. To that end, we introduce the first RCM-specific novel-view synthesis (NVS) approach, CD-RCM, a feedforward model that predicts realistic, unseen depths from sparsely sampled RCM stacks. Classical neural rendering methods focus on reconstruction from surface-level multi-view observations. In contrast to surface-level camera views, RCM can acquire optically sectioned en-face images of tissue beyond the surface up to 200 $\mu$m. However, during visualization of the RCM stacks, observations of the shallower sections (towards the surface) obscure the deeper ones. This unique axial imaging geometry and layer-dependent anatomical organization motivated our development of a tailored architectural and training framework that explicitly accounts for RCM's depth-resolved, occlusive imaging physics. Experiments demonstrate that CD-RCM achieves high-fidelity novel-view synthesis with sub-second inference time.

08.
arXiv (CS.AI) 2026-06-17

Temporal Preference Optimization for Unsupervised Retrieval

arXiv:2606.17664v1 Announce Type: cross Abstract: Unsupervised dense retrievers offer scalability by learning semantic similarity from unlabeled documents via contrastive learning, but they struggle to capture the temporal relevance, retrieving semantically related but temporally misaligned documents-an important aspect when a document collection spans multiple time periods (e.g., retrieving documents from 2018-2025 for "Who is the president in 2019?" introduces temporal ambiguity). Existing methods rely on supervised training with explicit timestamps, which are not always feasible. We propose TPOUR (Temporal Preference Optimization for Unsupervised Retriever), which uses our novel training method Temporal Retrieval Preference Optimization (TRPO). TRPO reinterprets preference learning in the temporal dimension, guiding the retriever to favor temporally aligned documents. TPOUR further generalizes to unseen time periods via interpolation in a learned time embedding, enabling continuous temporal alignment. Experiments on temporal information retrieval (T-IR), TPOUR outperforms both unsupervised and supervised baselines. Compared to Qwen-Embedding-8B, despite being about 72.7x smaller, TPOUR Contriever improves average nDCG@5 by +4.04 (+12.15%) on explicit and +4.98 (+15.21%) on implicit queries. We provide our code at https://github.com/agwaBom/TPOUR.

09.
arXiv (CS.CL) 2026-06-16

SAG: SQL-Retrieval Augmented Generation with Query-Time Dynamic Hyperedges

Retrieval-Augmented Generation (RAG) offers an effective approach for large language models to access external knowledge. However, existing methods rely on dense similarity retrieval and face inherent limitations in handling structured constraints and multi-hop reasoning. Incorporating knowledge graphs partially alleviates these issues, but at the cost of semantic fragmentation, high maintenance overhead, and difficult incremental updates. This paper introduces SAG (SQLRetrieval Augmented Generation), a structured architecture for retrieval and agent systems. Instead of pre-building a global static graph, SAG converts each chunk into one semantically complete event and a set of indexing entities, then uses SQL join queries to dynamically link events that share entities into local hyperedges,constructing, at query time, a dynamically instantiated local index structure. This design avoids the need for global graph rebuilding and ongoing maintenance; the system naturally supports incremental writes, concurrent processing, and continuous scaling through its reliance on standard database infrastructure. Across HotpotQA, 2WikiMultiHop, and MuSiQue, three standard multi-hop benchmarks,SAG achieves the best results on 8 out of 9 Recall@K metrics, reaching 80.0% Recall@5 on MuSiQue, the benchmark with the highest multi-hop reasoning demands.SAG has also been deployed at a production scale of hundreds of millions of data items, with online retrieval latency kept within seconds. Project site and code are available at https://github.com/Zleap-AI/SAG-Benchmark.

10.
arXiv (CS.CL) 2026-06-11

Fast Speech Foundation Model Distillation Using Interleaved Stacking

Distilling a large speech foundation model (SFM) into an efficient student model has been successfully applied to low-resource environments. Although distillation reduces inference latency, it requires an additional student model training. However, the training efficiency of SFM distillation remains underexplored. In this work, we explore training acceleration of SFM distillation to speed up model deployment. We examine the potential of stacking, in which the model depth is progressively increased through training until the target model depth is reached. While existing stacking methods improve training speed, they suffer from performance degradation. To handle this limitation, we propose interleaved stacking, a novel stacking method that consistently preserves layer position throughout the stacking process. This property is particularly critical in SFMs, in which each layer encodes distinct layer-specific knowledge. We validate the effectiveness of the proposed method on SUPERB.

11.
arXiv (CS.CL) 2026-06-16

BALTO: Balanced Token-Level Policy Optimization for Hallucination Mitigation

Hallucinations remain a major obstacle to deploying large language models (LLMs) in knowledge-intensive settings, where generated responses must be faithfully grounded in provided evidence. Reinforcement learning (RL) is a promising direction for hallucination mitigation, but response-level faithfulness rewards suffer from a granularity mismatch: localized hallucinations can cause supported content to receive spurious penalties. Although recent work introduces fine-grained feedback such as claim-level verification and token-level rewards, unbalanced credit assignment can still induce length, verbosity, or optimization-noise biases. We propose BALTO, a Balanced Token-level Policy Optimization framework for hallucination mitigation. BALTO extracts checkable factual claims, verifies them against the reference context, and projects claim-level judgments to token-level labels. A balanced token-level credit assignment mechanism is introduced into the framework. This design redistributes probability mass from unsupported content toward faithful content, rather than suppressing the entire response. We systematically analyze the limitations of response-level rewards from a theoretical standpoint, and prove BALTO's advantages in training stability and optimization efficiency for hallucination mitigation. Experiments on ConFiQA, RAGTruth, and FinLLM-Eval show that BALTO achieves the highest faithfulness across all six model–benchmark settings and consistently outperforms existing post-training baselines in Q-Score, demonstrating a stronger faithfulness–informativeness trade-off.

12.
arXiv (CS.LG) 2026-06-16

STAR-NT: Spatiotemporal Acceleration of Real-Time Neural Transparency Rendering

arXiv:2606.16747v1 Announce Type: cross Abstract: Neural order-independent transparency delivers high-quality rendering of overlapping transparent surfaces, but its geometry passes and network input generation remain costly, particularly on mobile and legacy hardware. We present a spatiotemporal acceleration framework that exploits spatial and temporal coherence to reduce this overhead while preserving visual quality. Spatially, we use adaptive quadtree-based screen-space subdivision to scale geometry pass resolution according to local color variance. Temporally, selected frames reuse the previous transparency result through depth-based reprojection instead of full rendering. Together, these optimizations reduce rendering cost and integrate efficiently into existing real-time rendering pipelines.

13.
arXiv (CS.CV) 2026-06-12

VideoMDM: Towards 3D Human Motion Generation From 2D Supervision

We introduce VideoMDM, a diffusion-based framework that trains 3D human motion priors directly from accurate 2D poses extracted from monocular videos, without any 3D ground truth. A pretrained 2D-to-3D lifter provides approximate 3D pose sequences that serve as a noisy teacher: these are diffused, denoised by the model in 3D, and supervised in 2D by reprojecting the prediction and comparing against accurate keypoints. We show that, under mild assumptions, a depth-weighted 2D reprojection loss is equivalent in expectation to direct 3D supervision, and we adapt standard 3D motion regularizers - velocity consistency and over-parameterized representation alignment - to this 2D setting. Unlike methods that lift 2D to 3D only at inference, VideoMDM learns a coherent 3D motion manifold during training. On HumanML3D it nearly closes the gap to fully 3D-supervised MDM (FID 0.88 vs 0.54); On real video datasets Fit3D and NBA the method learns to generate motions consistently preferred by humans, with strong quantitative results.

14.
Nature (Science) 2026-06-10

Hybrid refinery process turns plant material into industrially important chemical

An ingredient of nylon has been made in high yields from lignin — revealing a fresh strategy for turning this complex plant biopolymer into industrial chemicals. An ingredient of nylon has been made in high yields from lignin — revealing a fresh strategy for turning this complex plant biopolymer into industrial chemicals.

15.
arXiv (CS.AI) 2026-06-19

Grounded Inference: Principles for Deterministically Encapsulated Generative Models

arXiv:2606.19753v1 Announce Type: new Abstract: The incorporation of generative models into traditional computational systems presents both enormous opportunity and tremendous peril. Although many early adopters have realized these perils at great expense, the field still requires foundational frameworks to de-risk incorporation of AI into traditional systems. This manuscript establishes this foundation through the definition of four specific primitives of AI blended architecture, designed to enable deterministic encapsulation of probabilistic models. It further establishes two overarching anti-patterns broadly represented across industry to serve as warnings for engineers in this field. This framework was designed to enable successful integration of AI into traditional systems while providing a foundation upon which generative model providers could build the next generation of generative model interfaces.

16.
bioRxiv (Bioinfo) 2026-06-11

PhyloZoo: a unified framework for phylogenetic network analysis in Python

作者:

Reticulate evolutionary processes (events in which lineages merge, such as hybridization, recombination, and horizontal gene transfer) are widespread across nature but cannot be represented by phylogenetic trees alone. Phylogenetic networks have therefore become an important modelling tool, yet existing software is typically tied to specific inference paradigms and provides limited support for working with multiple network representations in a unified and programmable environment. PhyloZoo is an open-source Python framework that lowers the barrier to developing practical, easy-to-use software for phylogenetic network analysis. It provides data structures and algorithms covering the main representations used in the field, together with dedicated visualization tools and robust I/O for all major phylogenetic file formats. A particular emphasis lies on semi-directed phylogenetic networks, which explicitly represent root uncertainty and have so far received limited support in existing software. By offering a shared foundation for developing interoperable tools and a combinatorial layer that supports computational proofs and theoretical exploration, PhyloZoo enables reproducible workflows for applied, methodological, and theoretical studies of reticulate evolution. Availability and implementation: PhyloZoo is implemented in Python and installable from PyPI, with source code, documentation, and examples available at https://github.com/nholtgrefe/phylozoo.

17.
arXiv (CS.CV) 2026-06-12

HairPort: In-context 3D-aware Hair Import and Transfer for Images

Transferring hairstyles between images is an important but challenging task in computer graphics, computer vision, and visual effects. It enables users to explore new looks without physically altering their hair, with applications in virtual try-on systems, augmented reality, and entertainment. Most prior works operate best under small pose gaps, and they fall short under large viewpoint and scale differences, where missing hair content must be synthesized rather than transferred. We propose HairPort, a 3D-aware hairstyle transfer framework that attempts to solve these issues by explicitly separating hair removal from transfer and enforcing geometric consistency before synthesis. We introduce a Bald Converter, which produces realistic bald versions of faces through LoRA-based in-context adaptation of FLUX.1 Kontext. To train our Bald Converter, we introduce a new dataset, Baldy, containing 6,000 paired bald and original images across diverse identities and conditions. We also use a 3D-Aware Transfer Pipeline that reconstructs and re-renders the reference hairstyle from the target viewpoint before compositing it onto the source image. Being 3D aware, our method supports large pose and scale discrepancies between the source and target. Finally, a conditional flow-matching generator synthesizes the transferred result from the bald source and geometry-aligned reference guidance. Together, our method enables accurate, pose-consistent, and identity-preserving hairstyle transfer, outperforming existing methods both qualitatively and quantitatively.

18.
arXiv (CS.LG) 2026-06-15

Learning the Context of Errors: Black-Box Online Adaptation of Time Series Foundation Models

arXiv:2606.14222v1 Announce Type: new Abstract: The rapid evolution of Time Series Foundation Models (TSFMs) has advanced zero-shot forecasting across diverse domains. Inspired by the current form of Large Language Models, future TSFMs may be offered as commercialized, closed-source API services. However, many existing online adaptation methods still rely on white-box access for parameter fine-tuning or gradient backpropagation. This paradigm mismatch raises a question: In black-box online adaptation for TSFMs, what should we learn? We answer this with an insight: the predictive errors of the base model are conditioned on both the input and output of the base model (i.e., the context of errors). To validate this insight, we propose ORCA (Online Residual Contextual Adaptation). We conduct extensive experiments across 5 state-of-the-art TSFMs and 8 datasets to demonstrate the effectiveness of our approach. Furthermore, through ablation studies, we quantitatively analyze the impact of different adapter learning hypotheses on the final adaptation performance in black-box online adaptation. Code available at https://github.com/Fifthky/ORCA.

19.
arXiv (CS.AI) 2026-06-16

Exploiting Search in Symbolic Numeric Planning with Patterns

arXiv:2606.16329v1 Announce Type: new Abstract: In this paper, we present a procedure for numeric planning based on Symbolic Pattern Planning (SPP). Given a numeric planning problem $\Pi$, a pattern $\prec$ is a sequence of actions used to define a formula encoding the subsequences of $\prec$ executable from a starting state $S$. Cardellini, Giunchiglia, and Maratea (2024a) follow the Planning as Satisfiability approach by defining, at each step $n \ge 0$, a formula $\Pi^\prec_n$ in which $(i)$ the pattern $\prec$ is computed only for $n=0$ in the initial state $I$ of $\Pi$, and then exploited at each step $n$, $(ii)$ the starting state $S$ is set to $I$, and $(iii)$ the set $G$ of goals is required to hold in the last state that can be reached by one of the subsequences of $\prec$ concatenated $n$ times. The procedure begins with $n=0$, terminates as soon as $\Pi^\prec_n$ is satisfiable, and otherwise proceeds by incrementing $n$. In this paper, possibly at each step, $(i)$ we symbolically search for an intermediate state $P$ reachable from $I$, closer to a goal state, $(ii)$ dynamically recompute the pattern $\prec_h$ – to be used in the next step – in $P$, $(iii)$ refine the pattern $\prec_g$ used to reach $P$, and $(iv)$ start the new search from the state $S$ which can be either the initial state $I$ or the last computed intermediate state $P$, exploiting the computed patterns $\prec_g$ and $\prec_h$ to define the pattern $\prec$ to be used in the search. In particular, at each step, we define a formula $\Pi^{\prec}_{S,P}$ encoding the existence of a state $P'$ closer than $P$ to a goal state, with $P'$ reachable from the starting state $S$ when using the pattern $\prec$. We present different techniques for producing such formulas, each corresponding to a different strategy for exploring the search space. We prove their correctness and completeness, the latter under certain conditions.

20.
arXiv (CS.LG) 2026-06-16

Bayesian Tensor Decomposition with Diffusion Model Prior

arXiv:2606.03212v2 Announce Type: replace Abstract: Low-rank tensor decomposition (TD) is usually effective on clean, fully observed data, but it often degrades under severe missingness or noise. Low-rankness is itself a useful but limited structural prior, and additional handcrafted priors (e.g., sparsity or smoothness) still fall short of capturing the rich statistics of real-world data. To compensate for this weak inductive bias under heavy corruption, one would like to inject a learned, data-driven prior; however, the state-of-the-art diffusion models are not readily compatible with current TD and tractable posterior inference. To address these challenges, we introduce DiffBCP, a hybrid-prior Bayesian CP decomposition framework that couples a cumulative shrinkage process prior over the CP factors for automatic rank selection with an off-the-shelf pre-trained diffusion model as an implicit data prior on the reconstructed tensor. To make posterior inference tractable despite the coupling among the likelihood, low-rank constraint, and diffusion prior, we develop a split Gibbs sampler: CP factors admit conjugate updates, while the diffusion block is sampled via low-rank-guided denoising. A noise-adaptive coupling schedule further reduces sensitivity to hand-tuned annealing. Experiments on image inpainting and denoising, including high-resolution out-of-distribution images, show consistent gains over Bayesian, nonlinear, and plug-and-play TD baselines.

21.
arXiv (CS.LG) 2026-06-12

Enhanced Low-Density Region Exploration in Classifier-Guided Diffusion Models Through Modified Reverse Diffusion Sampling

arXiv:2606.13347v1 Announce Type: new Abstract: Diffusion models have emerged as state-of-the-art generative models for high-fidelity image synthesis, particularly in their classifier-free guided and classifier-guided forms. However, standard classifier guidance concentrates probability mass around high-density class mean, leading to poor coverage of rare samples in the tails of the class-conditional distributions. Recent work on diffusion-based tail sampling mitigates this by training an additional low-density-seeking classifier with a synthetic-vs-real discriminator, at the cost of additional networks and training. In parallel, a number of samplers and distillation techniques accelerate or refine diffusion sampling, but do not explicitly address long-tail coverage. We propose a purely sampling-time, density-aware extension of classifier-guided conditional diffusion model that targets low-density regions without any additional training. We have applied guidance at noisy images not on predicted noise like most diffusion models. Starting from a pretrained conditional diffusion model and classifier on ImageNet, we modify the guided reverse dynamics by steering trajectories toward low-confidence regions via the modified classifier gradient, and at each time step, we also guide the sampling process toward the predicted real image. 1st guidance helps explore low-probability samples, and 2nd guidance helps to generate samples to be close to the real data manifold. The proposed sampler consistently improves ADM model recall at 64x64 resolution while maintaining a comparable FID, and with a 256x256 ADM model, we showed the results visually with different combinations of both guidance. We also showed that standard ADM classifier guidance, combined with predicted real image guidance, helps generate high perceptual quality samples with a 256x256 ADM model on ImageNet.

22.
arXiv (CS.AI) 2026-06-19

Modeling Day-Long ECG Signals to Predict Heart Failure Risk with Explainable AI

arXiv:2601.00014v2 Announce Type: replace-cross Abstract: Heart failure (HF) affects 11.8% of adults aged 65 and older, reducing quality of life and longevity. Preventing HF can reduce morbidity and mortality. We hypothesized that artificial intelligence (AI) applied to 24-hour single-lead electrocardiogram (ECG) data could predict the risk of HF within five years. To research this, the Technion-Leumit Holter ECG (TLHE) dataset, including 69,663 recordings from 47,729 patients, collected over 20 years was used. Our deep learning model, DeepHHF, trained on 24-hour ECG recordings, achieved an area under the receiver operating characteristic curve of 0.80 that outperformed a model using 30-second segments and a clinical score. High-risk individuals identified by DeepHHF had a two-fold chance of hospitalization or death incidents. Explainability analysis showed DeepHHF focused on arrhythmias and heart abnormalities. This study highlights the feasibility of deep learning to model 24-hour continuous ECG data, capturing paroxysmal events essential for reliable risk prediction. Artificial intelligence applied to single-lead Holter ECG is non-invasive, inexpensive, and widely accessible, making it a promising tool for HF risk prediction.

23.
arXiv (quant-ph) 2026-06-19

A Finite-Volume Scheme for the Continuum Extrapolation of Lattice Step-Scaling in (2+1)D Hamiltonian U(1) Gauge Theory

arXiv:2606.20029v1 Announce Type: cross Abstract: We propose a finite-volume scheme to perform controlled continuum extrapolations of the lattice step-scaling function, a key ingredient for determining the running coupling in a Hamiltonian lattice gauge theory in small volumes. As a testbed, we employ a dual Hamiltonian formulation of pure U(1) gauge theory in (2+1) dimensions and an operator basis that remains efficient toward weak coupling. We describe the implementation of static external charges on the spatial lattice and study, using matrix product states, the resulting confining string, from which we extract the static potential and a force-based renormalized coupling. Using the proposed finite-volume scheme, we demonstrate a stable continuum limit of the step-scaling function on the lattice sizes accessible to present Hamiltonian simulations. The method is readily extendable to other gauge groups and dimensions, providing a pathway toward Hamiltonian step-scaling studies in other theories.

24.
arXiv (CS.CL) 2026-06-19

Prompt, Plan, Extract: Zero-Shot Agentic LLMs Workflows for Lung Pathology Extraction from Clinical Narratives

Information extraction from pathology reports is essential for cancer staging, tumor registry population. Yet key data remains embedded in narrative reports, making manual extraction labor-intensive and error-prone. Traditional supervised Natural Language Processing pipelines address this through fully supervised Named Entity Recognition and Relation Extraction, but require expensive manual annotation and suffer cascading failures when upstream entities are missed. In this study, we developed a zero-shot, agentic workflow, and evaluated five open-source generative Large Language Models (LLMs) to populate 13 College of American Pathologists synoptic fields from lung resection pathology reports. We compared them against a state-of-the-art supervised GatorTron NER-RE baseline using a novel, registry-aligned evaluation framework. The baseline achieved Micro-F1of 0.960, while the best zero-shot model (GPT-OSS-20B) achieved Micro-F1 of 0.893 (recall: 0.949), accurately extracting complex relations like Pathologic Stage without task-specific training. These results suggest that open-source, zero-shot agentic LLMs are a low-cost solution for extracting lung pathology information.

25.
arXiv (CS.CV) 2026-06-12

Cascade Classification of Dermoscopic Images of Skin Neoplasms with Controllable Sensitivity and External Clinical Validation

Purpose. To compare deep learning architectures and classification schemes for dermoscopic images of skin neoplasms and assess their generalization on transfer from open international datasets to independent clinical datasets of Russian practice. Methods. Four architectures (ViT-B/16, Swin-S, ConvNeXt-S, EfficientNetV2-S) were compared in three schemes: binary (malignant/benign), single-stage four-class (benign, MEL, SCC, BCC), and a two-stage cascade (binary triage, then three-class differentiation MEL/SCC/BCC). All models used ImageNet-pretrained weights and a single augmentation protocol on aggregated open ISIC Archive data, and were evaluated on an internal held-out sample and two clinical datasets (Melanoscope AI mobile system; Sechenov University). Results. Internally the binary stage attains ROC-AUC 0.952-0.966; on Sechenov University it drops to 0.797-0.893, sensitivity to 0.53-0.67, and ECE rises from 0.02 to 0.27-0.39 with underestimation of malignancy, quantifying a generalization gap in ranking and calibration. Paired tests confirm one inter-architecture result on clinical data: the deficit of ViT-B/16 at the binary stage (p