Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-16

A spectral audit framework reveals task-dependent aperiodic reliance across EEG and ECG deep learning

arXiv:2606.08583v2 Announce Type: replace Abstract: Deep learning on physiological time series is interpreted through domain-specific features – oscillatory rhythms in EEG, morphological complexes in ECG – yet these signals sit atop a broadband aperiodic 1/f-like envelope that covaries with arousal, age, and pathology. We introduce a spectral audit framework combining aperiodic/periodic decomposition, phase-preserving Fourier interventions, sham controls, and simulation validation. Aperiodic reliance was task-dependent and architecture-general: across six neural architectures, flattening drops exceeded 0.42 balanced-accuracy points for sleep-wake classification, reached 0.07-0.13 for clinical abnormality detection, and remained minimal for motor imagery. Six of seven EEG foundation models showed FDR-significant aperiodic reliance on clinical EEG; age/sex and recording-era controls reduced but did not eliminate the effect. Applying the audit to PTB-XL ECG revealed neural drops of 0.32–0.36 persisting after demographic matching, confirming this confound class extends beyond EEG. Aperiodic controls should become standard for interpretable physiological time-series deep learning.

02.
arXiv (CS.AI) 2026-06-17

RLRC: Reinforcement Learning-based Recovery for Compressed Vision-Language-Action Models

arXiv:2506.17639v2 Announce Type: replace-cross Abstract: Vision-Language-Action models (VLA) have demonstrated remarkable capabilities and strong potential in complex robotic manipulation. However, their large parameter sizes and high inference latency hinder real-world deployment, especially on resource-constrained platforms. To address this, we conduct a systematic empirical study of model compression for VLAs. Building on these insights, we present RLRC, a three-stage compression and recovery pipeline consisting of structured pruning, performance recovery via SFT and RL, and subsequent quantization. The RL stage incorporates a critic warm-up strategy and BC loss regularization to stabilize training and preserve policy behavior. RLRC achieves up to an 8 times memory reduction and 2.3 times inference speedup while maintaining the original task success rate. Extensive experiments across multiple VLA backbones show that RLRC consistently outperforms existing compression baselines, highlighting its effectiveness for on-device deployment. Project website: https://rlrc-vla.github.io

03.
bioRxiv (Bioinfo) 2026-06-18

MorphoStat: A Statistics-Aware Pipeline for Morphological Profiling Analysis

作者:

High-content imaging produces thousands of morphological measurements per cell. Interpreting these measurements requires normalization to remove plate effects, statistical tests selected on the basis of data distribution, and control over false discoveries across many features tested at once. MorphoStat is an open-source Python pipeline that applies this sequence of steps automatically. Given a CSV file from CellProfiler or a compatible imaging platform, it removes low-quality wells, normalizes each plate against DMSO controls using a MAD-scaled z-score, routes each feature to a parametric or nonparametric test based on a distributional check, applies Benjamini Hochberg correction, and writes out results and publication-ready figures. On the BBBC021 benchmark (MCF-7 breast-cancer cells, 632 wells, 473 features), MorphoStat recovered 12 of 13 known mechanism-of-action classes in principal component space, confirming that the normalization and statistical routing work as intended. The tool is available at https://github.com/Almunthir334/morphostat (DOI: 10.5281/zenodo.20354069) under the MIT license.

04.
arXiv (quant-ph) 2026-06-11

Measurement incompatibility and quantum steering via linear programming

arXiv:2506.03045v3 Announce Type: replace Abstract: The problem of deciding whether a set of quantum measurements is jointly measurable is known to be equivalent to determining whether a quantum assemblage is unsteerable. This problem can be formulated as a semidefinite program (SDP). However, the number of variables and constraints in such a formulation grows exponentially with the number of measurements, rendering it intractable for large measurement sets. In this work, we circumvent this problem by transforming the SDP into a hierarchy of linear programs that compute upper and lower bounds on the incompatibility robustness with a complexity that grows polynomially in the number of measurements. The hierarchy is guaranteed to converge and it can be applied to arbitrary measurements – including non-projective POVMs (Positive Operator-Valued Measures) – in arbitrary dimensions. While convergence becomes impractical in high dimensions, in the case of qubits our method reliably provides accurate upper and lower bounds for the incompatibility robustness of sets with several hundred measurements in a short time using a standard laptop. We also apply our methods to qutrits, obtaining non-trivial upper and lower bounds in scenarios that are otherwise intractable using the standard SDP approach, although such bounds are significantly looser than the ones obtained in the qubit case. Finally, we show how our methods can be used to construct local hidden state models for states (i.e., to prove that a state cannot lead to steering under any possible local measurements), or conversely, to certify that a given state exhibits steering; for two-qubit quantum states, our approach is comparable to, and in some cases outperforms, the current best methods.

05.
arXiv (CS.CV) 2026-06-12

ReFoCUS: Reinforcement-guided Frame Optimization for Contextual Understanding

Recent progress in Large Multi-modal Models (LMMs) has enabled effective vision-language reasoning, yet the ability to video understanding remains constrained by suboptimal frame selection strategies, albeit with the rapid development of video-specialized LMMs. Prior works attempted to solve this with static heuristics or external retrieval modules to feed frame-level information, but these approaches often fail to capture visual cues grounded to the given user queries conflating raw visual dynamics with true semantic relevance. In this paper, we introduce ReFoCUS (Reinforcement-guided Frame Optimization for Contextual UnderStanding), the first framework to integrate online policy-gradient reinforcement learning into frame-level optimization for video-LLMs. ReFoCUS aims to learn a frame selection policy, leveraging reward signals derived from reference models to capture their underlying scoring behavior over frame combinations that best support temporally grounded responses. To efficiently explore the large combinatorial frame space, we employ an autoregressive and query-conditional selection architecture that ensures contextual consistency while reducing complexity. Our policy learning removes the need for explicit frame-level supervision, as it implicitly discovers optimal and semantically consistent frame compositions. ReFoCUS consistently improves reasoning accuracy across multiple video QA benchmarks, demonstrating the advantage of aligning frame selection with model-internal utility.

06.
arXiv (CS.CV) 2026-06-11

DepthMaster: Unified Monocular Depth Estimation for Perspective and Panoramic Images

While monocular depth estimation has achieved significant progress, achieving generalized metric depth estimation for both narrow field-of-view (FoV) perspectives and $360^\circ$ panoramas remains an unsolved challenge. Existing methods are often tailored to specific camera types and struggle to produce accurate metric depth that generalizes across diverse settings. This limitation stems from two key challenges: the inherent geometric discrepancy between perspective and panoramic cameras, and the scarcity of panoramic training data with metric annotations. In this work, we introduce DepthMaster, a unified metric depth estimation framework. Rather than employing specialized networks to learn spherical distortions, we reformulate the problem by decomposing panoramic images into overlapping perspective patches. Crucially, distinct from prior projection-based methods that rely on ad-hoc architectural modifications to handle boundaries, we introduce a novel Correspondence Consistency Loss (CCL) and inject virtual projection cameras as geometric priors, allowing us to seamlessly stitch the patches while avoiding specialized operators and keeping the backbone largely compatible with standard Transformer designs. This strategy also resolves the geometric differences by unifying all inputs into a canonical perspective representation, and effectively circumvents data scarcity by directly unlocking powerful metric priors from vast perspective datasets. Trained on a mixed dataset that contains only one panorama dataset, DepthMaster achieves state-of-the-art zero-shot performance on 13 diverse datasets, outperforming not only universal methods but also leading specialist models in both perspective and panoramic domains.

07.
arXiv (CS.AI) 2026-06-16

Co-Scraper: query-aware DOM Pruning and Reusable Scraper Synthesis for Lightweight Web Data Extraction

arXiv:2606.14821v1 Announce Type: cross Abstract: The abundant and heterogeneous nature of web content necessitates automated information extraction, and generating scrapers that can be reused across similar web pages offers an effective solution for scalable data extraction. In this work, we propose Co-Scraper, a two-stage framework capable of handling the hierarchical complexity of long HTML documents. By integrating a query-aware DOM pruning mechanism with stable extraction strategy induction, Co-Scraper can effectively transforms web content into executable programmatic wrappers using a fine-tuned Qwen3-8B model. On the test set of SWDE, Co-Scraper achieves state-of-the-art performance with an F1 score of 94.78% and a reuse success rate of 90.39%. This framework significantly enhances the accuracy and resilience of data extraction, providing a highly efficient approach for web data acquisition tasks.

08.
arXiv (CS.CV) 2026-06-17

Root-Selecting Fixed-Point Inversion for Rectified Flows via Trajectory Straightness

Finding the initial noise that generates a given data sample, known as inversion, is a key component for downstream applications such as training-free image editing. Existing fixed-point inversion methods improve inversion accuracy by formulating each inversion step as a fixed-point problem, but they lack a principled mechanism for selecting among multiple fixed-point solutions that can arise in practice. We observe that different selections induce different inversion trajectories, leading to substantial variation in reconstruction and editing quality. For rectified flows, we further find that this variation is closely associated with trajectory straightness, motivating straightness as a principled selection criterion. We propose SelFix, a fixed-point inversion method that selects fixed-point solutions inducing straighter inverse trajectories while retaining convergence to an exact inverse root under standard local assumptions. Experiments on FLUX.1-dev and PIE-Bench show that SelFix improves fixed-point inversion, achieving stronger real-image reconstruction and better source-preserving prompt-based editing than prior inversion baselines. The code is available at https://github.com/seminkim/selfix.

09.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.

10.
arXiv (CS.CV) 2026-06-12

Diffusion Transformer World-Action Model for AV Scene Prediction

Action-conditioned world models let an autonomous vehicle predict future camera scenes from its own planned controls, enabling planning and simulation without real-world rollouts, but at compact, trainable scale the futures are ambiguous and the field's standard distortion metrics actively mislead: they reward a blurry regression mean over a realistic prediction. We confront this with a compact latent world model that, given the present front-camera latent and a sequence of ego-actions, predicts future scene latents a frozen decoder renders to $256 \times 256$ frames up to 8 seconds ahead, evaluated on 150 held-out nuScenes scenes. We first benchmark where to predict: across six frozen encoders spanning four representation families, V-JEPA2 with temporal context reduces steering RMSE by 40% over the best single-frame encoder. We then train a latent Diffusion Transformer (DiT) and, through a controlled diagnosis, identify the four ingredients it needs: spatial tokens, the $x_0$ objective, residual anchoring, and sampling matched to target uncertainty. In a Stable-Diffusion-VAE encode-predict-decode pipeline we expose the central tension: distortion metrics (cosine similarity, SSIM) favor the blurry mean, masking that the diffusion model is far closer to the real frame distribution. Inception-based FID and KID reveal a clean perception-distortion frontier: diffusion attains KID 0.078 versus 0.375 for regression ($4.8\times$ better), and a deployable train-derived calibration makes this practical without test-time ground truth. The model is genuinely action-controllable (steering drives scene displacement, Spearman $\rho = 0.81$, vs $-0.18$ for regression). We trace limited single-pass motion to a shared-present anchor and engineer a compact 1.7M-parameter "jump" model that recovers full ground-truth motion magnitude ($1.02\times$ GT), where single-pass models capture less than half.

11.
bioRxiv (Bioinfo) 2026-06-18

Bioinf-Farma: supervised integration of epitope prediction and recombinant protein developability for automated vaccine candidate prioritization

Vaccine antigen discovery requires prioritizing protein candidates according to both immunogenic potential and recombinant expression feasibility. These properties are typically evaluated using separate computational tools, requiring researchers to integrate heterogeneous outputs through ad hoc workflows. Here, we present BIOINF-farma, a modular platform integrating epitope prediction and developability assessment for rational antigen selection within a unified environment. Candidates can be submitted as amino acid sequences or three-dimensional structures. When experimental structures are unavailable, BIOINF-farma automatically searches for models in AlphaFold DB or performs structure prediction using Boltz-2, ensuring a standardized structural representation for downstream analyses. Antigenicity is quantified by combining structure-based conformational epitope signals (MLCE/REBELOT-BEPPE) and sequence-based linear epitope propensity scores (BepiPred 3.0) into a protein-level Antigenicity Score, with a classification threshold optimized on a manually curated validation dataset. Developability is evaluated through two supervised Random Forest meta-learners that integrate three solubility predictors (DeepSoluE, SoluProt, Protein-Sol) and three thermal stability predictors (TemStaPro, ProLaTherm, BertThermo), whose outputs are combined into an Expression Efficiency Score (EES). By integrating complementary predictive signals, the meta-learning framework achieves greater accuracy and robustness than individual predictors while maintaining performance across a broad range of sequence identities. The Antigenicity Score effectively discriminates antigenic from non-antigenic proteins with a large effect size, whereas EES successfully distinguishes soluble from insoluble outcomes on an independent panel of recombinant proteins expressed in Escherichia coli. BIOINF-farma jointly assesses antigenicity and expression feasibility within a single framework. Its modular architecture facilitates the incorporation of future predictive methods, while its web-based interface makes the full pipeline accessible to users without programming expertise, supporting rapid candidate triage in vaccine research and emerging pathogen responses.

12.
arXiv (CS.LG) 2026-06-17

Half a Link can Be Enough to Predict a Whole Link: Understanding Generalization in Knowledge Graph Foundation Models

arXiv:2606.18001v1 Announce Type: new Abstract: Knowledge graph (KG) foundation models (KGFMs) are zero-shot generalizers: trained once, they can predict links on unseen graphs without retraining. However, understanding when and how they can robustly generalize across KGs is still an open question. In this paper, we shed some light on their generalization mechanisms highlighting how their performance on unseen KGs is not uniform when it comes to partially seen links, which we call half-links. In fact, we show that to predict a test triple $(h,r,t)$ it might suffice in practice to have observed the half-link $(h,r)$ or $(r,t)$ in the inference graph. This yields a taxonomy of four scenarios when combinations of these half-links are observed or not. In a rigorous stratified analysis over these scenarios, we reveal that SoTA KGFMs use seen half links for predictions, while unseen half-links pose different challenges. As such, our finer-grained taxonomy can be a diagnostic protocol for robust KGFM generalization and highlights where novel KGFMs can improve.

13.
arXiv (CS.LG) 2026-06-11

From inverse problems to neural operators: prediction, mechanism, and generalization of data-driven models

作者:

arXiv:2606.08956v2 Announce Type: replace Abstract: Scientists have historically relied on mathematical models based on differential equations to relate system inputs – forces, fluxes, or heat sources – to outputs, such as displacement, velocity, concentration, and temperature. These models rely on deep domain knowledge to determine the form of the governing differential equation, which is then calibrated with data by solving an inverse problem. In recent years, the field of Scientific Machine Learning has introduced a variety of alternative modeling strategies for physical systems. A method called Sparse Identification of Nonlinear Dynamics learns the governing equation as a sparse linear combination of terms in a user-defined library. Neural Ordinary Differential Equations construct the governing equation by taking in the state and its derivatives at the input layer of a neural network. Entirely foregoing the modeling framework of differential equations, neural operators directly learn a non-linear mapping between the system inputs and outputs. From inverse problems to neural operators, all of these modeling strategies can be conceptualized as data-driven machinery to predict a system's response over a range of inputs. It is then natural to wonder how exactly these various strategies relate to each other, and whether they can be neatly taxonomized. Drawing from the philosophical literature on scientific models, we argue that many model types have a common structure, differing only in the assumed model class of the input-output relation they define. Connecting to philosophical ideas on mechanism, and arguing that data from physical systems arises from solutions to parsimonious differential equations, we propose that only certain models are capable of mechanism discovery, and thus generalization. Our analysis is intended to unite apparently disparate modeling strategies and provide insight into their appropriate use cases.

14.
arXiv (CS.CL) 2026-06-18

From Sparse Features to Trustworthy Proxies: Certifying SAE-Based Interpretability

Sparse autoencoders (SAEs) are increasingly used to extract interpretable features from language models (LMs), yet a central question remains: when can an SAE-based explanation be treated as a faithful view of an underlying frozen LM We study this through a post-hoc generalization framework that certifies the LM via a sparse proxy, obtained by replacing a native hidden activation with its pretrained SAE reconstruction. Our framework derives an upper bound on the base model's expected risk using four measurable quantities: proxy risk, SAE reconstruction gap, concept-pool mismatch, and sparse complexity. We interpret this certificate as an operational criterion for explanatory faithfulness. In particular, a non-vacuous bound indicates that the extracted sparse features retain meaningful predictive information, while small reconstruction and mismatch errors indicate that the proxy remains behaviorally close to the original model. Empirically, we show that the bound becomes non-vacuous on GPT-2 Small, Gemma-2B, and Llama-3-8B at practical sample sizes. A detailed layerwise analysis of Llama-3-8B reveals a strong depth dependence, with later layers becoming much easier to certify, associated with both stronger local fidelity and weaker downstream error amplification. Finally, through feature-shuffling ablations, we show that the decomposition distinguishes genuine semantic alignment from mere statistical sparsity, providing a useful diagnostic for when SAE-based explanations become less reliable.

15.
arXiv (CS.LG) 2026-06-16

Leveraging Physiological Signals to Predict Exam Outcomes with Machine Learning

arXiv:2606.14960v1 Announce Type: new Abstract: This study investigates the application of machine learning models to predict exam outcomes using physiological data collected during examination sessions. Physiological stress indicators, including electrodermal activity, heart rate, and skin temperature, were analyzed to uncover their association with academic performance. A variety of machine learning approaches were employed, ranging from standard models like logistic regression, random forest, and support vector machines to more advanced architectures, including transformers, long short-term memory (LSTM), and gated recurrent unit (GRU) models. This diversity aimed to capture the complex interactions within the data effectively. A key focus was assessing the adaptability of transformers in processing numerical data and evaluating their performance in this novel context. Standard performance metrics, such as accuracy, precision, recall, and F1-score, were used to compare model efficacy. The experimental results demonstrate that while deep learning models generally excel at capturing complex relationships in physiological data, simpler models like random forests can sometimes achieve superior performance while offering computational efficiency and interpretability. Furthermore, transformers demonstrated notable versatility, showcasing performances comparable to those of the LSTM and GRU models. This research underscores the importance of experimenting with a broad class of models that align with the objectives of the problem at hand, balancing precision, efficiency, and interpretability. By elucidating the relationships between physiological signals and academic performance, this study contributes to understanding stressors affecting students' mental health. It further promotes leveraging physiological data to enhance student well-being and academic outcomes.

16.
arXiv (CS.CV) 2026-06-16

VinQA: Visual Elements Interleaved Long-form Answer Generation for Real-World Multimodal Document QA

Real-world documents combine text with tables, charts, photographs, and diagrams arranged in diverse layouts, yet existing research on multimodal large language models (MLLMs) for document QA predominantly produces text-only responses, underutilizing these visual elements. We introduce VinQA, a dataset for long-form answer generation where cited visual elements are explicitly interleaved with their supporting text and grounded in relevant document pages. To support this task, we study two encoding methods for feeding raw document page images into an MLLM, along with their visual-element citation mechanisms: (1) Page Encoding, which directly encodes full-page images with bounding boxes of visual elements and treats these boxed regions as citable units; and (2) Modality Encoding, which parses each page to extract text and crop visual elements, encodes them separately, and uses these cropped elements as citable units. In our experiments, we propose M-GroSE, a multimodal evaluation framework extending GroUSE to assess answers along four dimensions: completeness, answer relevancy, faithfulness, and unanswerability. We additionally report Visual Source F1 to directly measure visual citation accuracy. Although proprietary frontier models still achieve the best overall scores on the VinQA test split, fine-tuning open Qwen2.5-VL models on the training split substantially improves their performance and narrows this gap. Modality Encoding is initially more robust for complex documents with long text, many visual elements, and diverse citation requirements. After training on VinQA, however, Page Encoding reaches a comparable level, competing effectively even without the explicit parsing used in Modality Encoding. Finally, Visual G-Eval, an MLLM-based judge, confirms that fine-tuned models insert visual elements at semantically appropriate positions with faithful supporting text.

17.
arXiv (CS.CL) 2026-06-16

Beyond Layer Importance in Layer-wise Sparsity: An Inter-Layer Perturbation-Absorption Perspective

The considerable layer-wise redundancy in large language models (LLMs) has established non-uniform sparsity allocation across layers as the standard pruning approach for efficient compression. Existing layer-wise allocation methods that estimate allocation strategy from local signals such as activation outliers or weight spectra mainly derive from local layer importance, whereas the final post-pruning performance is also influenced by the network's subsequent compensatory capacity. In this paper, we directly characterize this property through controlled perturbation experiments. We make the following empirical findings. First, layers exhibit highly heterogeneous responses to pruning-scale perturbations. In most cases, early layers amplify perturbations, while middle and late layers actively absorb them, with relative L2 drift decreasing monotonically across depth and direction realigning toward the unperturbed hidden-state trajectory. Second, absorption is a large-perturbation phenomenon. Under small perturbations the network exhibits amplification across all layers, and the transition to absorption occurs smoothly as perturbation magnitude grows to pruning scale. This enriches the linearized accumulation theory underlying related works. Building on these findings, we define an absorption coefficient per layer and propose absorption-aware correction, an orthogonal augmentation that improves OWL and AlphaPruning by reducing perplexity by 7.13% and boosting zero-shot accuracy by 1.02% across multiple model families at 70% sparsity.

18.
arXiv (CS.AI) 2026-06-19

CADBench: A Multimodal Benchmark for AI-Assisted CAD Program Generation

arXiv:2605.10873v2 Announce Type: replace-cross Abstract: Recovering editable CAD programs from images or 3D observations is central to AI-assisted design, but progress is difficult to measure because existing evaluations are fragmented across datasets, modalities, and metrics. We introduce CADBench, a unified benchmark for multimodal CAD program generation. CADBench contains 18,000 evaluation samples spanning six benchmark families derived from DeepCAD, Fusion 360, ABC, MCB, and Objaverse; five input modalities including clean meshes, noisy meshes, single-view renders, photorealistic renders, and multi-view renders; and six metrics covering geometric fidelity, executability, and program compactness. STEP-based families are stratified by B-rep face count and all families are diversity-sampled to support controlled analysis across complexity and object variation. We benchmark eleven CAD-specialized and general-purpose vision-language systems, generating more than 1.4 million CAD programs. Under idealized inputs, specialized mesh-to-CAD models substantially outperform code-generating VLMs, which remain far from reliable CAD program reconstruction. CADBench further reveals three recurring failure modes: reconstruction quality degrades with geometric complexity, CAD-specialized models can be brittle under modality shift, and model rankings change across metrics. Together, these results position CADBench as a diagnostic testbed for measuring progress in editable 3D reconstruction and multimodal CAD understanding. The benchmark is publicly available at https://github.com/anniedoris/CADBench.

19.
arXiv (CS.CL) 2026-06-17

Fine-tuning LLMs for Passive Depression Severity Estimation from AI Mental Health Dialogue

Depression is the leading cause of disability worldwide, and early detection of symptom change is essential for timely intervention. Validated instruments such as the Patient Health Questionnaire-9 (PHQ-9) support symptom monitoring at scale, but real-world completion rates are low, introducing response bias and systematic missingness. Passive approaches that infer severity from routinely generated data could close this gap. We address this by predicting PHQ-9 total scores directly from transcripts of conversations between users and an AI mental health application, requiring only conversation text and no additional clinical data. We fine-tune a Qwen3.5-27B backbone with a regression head, augment 3,111 ground-truth labels with pseudolabels generated by a reasoning model (Claude Opus) and iteratively trained intermediate models, for a combined dataset of 6,283 users. On a held-out test set of 842 users, our best model achieves MAE = 2.6, RMSE = 4.0, Pearson r = 0.80, and AUC = 0.91 at the PHQ-9 >= 10 clinical threshold. We also find AUC > 0.87 at every severity threshold from PHQ-9 >= 3 to PHQ-9 >= 24, demonstrating that the model captures depression severity across the full clinical spectrum. This work opens the door to passive, continuous symptom monitoring in AI mental health platforms, without requiring users to complete self-report measures.

20.
arXiv (quant-ph) 2026-06-15

Computational regimes in matrix-product-state-based quantum trajectory simulations

arXiv:2606.13779v1 Announce Type: new Abstract: Efficient simulation of open quantum systems is central to modeling noisy quantum hardware and many-body dynamics. In trajectory-based tensor network methods, cost is often associated with trajectory-level quantities such as entanglement growth or bond dimension. However, the total cost of a fixed-accuracy simulation also depends on statistical sampling, and the interplay between per-trajectory complexity and sampling effort remains poorly understood. Here we introduce a cost-resolved framework for matrix product state (MPS)-based quantum trajectory simulations that decomposes total cost into memory per trajectory, runtime per trajectory, and sampling effort. We show that physically equivalent stochastic unravelings of the same Lindblad dynamics do not necessarily reduce total cost, but instead redistribute cost between trajectory complexity and statistical convergence. This trade-off is quantified by two dimensionless inflation factors: a bond dimension inflation $\alpha$ and a sampling inflation $\kappa$, which together determine the preferred unraveling under hardware-dependent memory and parallelism constraints. We provide a practical protocol for extracting $(\alpha,\kappa)$ from modest pilot simulations and demonstrate it using benchmarks across multiple noise channels. The resulting decision maps show that the computationally favorable unraveling can change with noise strength, time-step resolution, system size, and available parallelism. These results establish unraveling choice as a hardware-aware simulation design problem rather than an intrinsic optimization of trajectory entanglement alone.

21.
medRxiv (Medicine) 2026-06-12

The Clinical Characteristics and mortality outcomes of Atrial fibrillation complicating Heart failure with reduced ejection fraction: A prospective study from South Africa

Background: A growing burden of cardiovascular risk factors has raised cardiovascular disease-related mortality in Sub-Saharan Africa (SSA), driving higher prevalence of heart failure with reduced ejection fraction (HFrEF) and its complication with atrial fibrillation (AF). No prospective study has examined AF's clinical impact on HFrEF in SSA. Aim: To determine AF prevalence in HFrEF, describe HFrEF-AF clinical characteristics, and determine AF's impact on mortality. Methods: In this prospective observational study at a tertiary hospital in Johannesburg, 136 HFrEF patients were enrolled and categorised as HFrEF- SR (sinus rhythm) or HFrEF-AF. Baseline clinical characteristics and biochemistry were recorded. Comprehensive echocardiography including left atrial strain by 2D speckle-tracking was performed. Median follow-up was 30.6 months. Results: AF was present in 28 patients (21%). The mean age was 58.7 {+/-} 14.9 years (52.9% male) and differed between groups (p < 0.001). Hypertensive heart disease was the leading cause of HFrEF (36%). Compared with SR, HFrEF-AF patients had poorer health status (KCCQ 27 [16-43] vs 45 [32-60], p < 0.001) and lower left atrial strain (26.2 {+/-} 11.3%, p < 0.001). Guideline-directed medical therapy was suboptimal in the AF group: anticoagulation use was higher than SR (60% vs 9.5%, p < 0.001) but overall inadequate; HFrEF-AF patients received lower median doses of carvedilol (15.6 mg vs 25 mg, p = 0.002) and enalapril (10 mg vs 20 mg, p = 0.004), and fewer received spironolactone (50% vs 75.3%, p = 0.013). Survival was significantly lower in HFrEF-AF (0.41 [0.22-0.61]) versus SR (0.73 [0.61-0.82], p < 0.001). Independent predictors of mortality included prior stroke, lower TAPSE and KCCQ, and higher E/e' and heart rate. Conclusion: AF is common among HFrEF patients in this SSA cohort (though lower than in high-income countries) and associates with worse clinical status, suboptimal therapy, and higher mortality.

22.
arXiv (CS.LG) 2026-06-16

On the Role of Computation in Reinforcement Learning

arXiv:2602.05999v3 Announce Type: replace Abstract: How does the amount of compute available to a reinforcement learning (RL) policy affect its learning? Can policies using a fixed amount of parameters, still benefit from additional compute? The standard RL framework does not provide a language to answer these questions formally. Empirically, deep RL policies are often parameterized as neural networks with static architectures, conflating the amount of compute and the number of parameters. In this paper, we formalize compute bounded policies and prove that policies which use more compute can solve problems and generalize to longer-horizon tasks that are outside the scope of policies with less compute. Building on prior work in algorithmic learning and model-free planning, we propose a minimal architecture that can use a variable amount of compute. Our experiments complement our theory. On a set 31 different tasks spanning online and offline RL, we show that $(1)$ this architecture achieves stronger performance simply by using more compute, and $(2)$ stronger generalization on longer-horizon test tasks compared to standard feedforward networks or deep residual network using up to 5 times more parameters.

23.
arXiv (CS.AI) 2026-06-16

HOLO-MPPI: Multi-Scenario Motion Planning via Hierarchical Policy Optimization

arXiv:2606.16480v1 Announce Type: cross Abstract: Robots deployed in the real world must plan motions across diverse scenarios without per-scenario retuning. End-to-end reinforcement learning (RL) can generalize across scenarios but often becomes brittle under distribution shift, reward misspecification, and stochastic interactions. Model predictive path integral (MPPI) control enables strong real-time refinement without gradients, but its performance depends on a well-shaped sampling prior, while manually designing the priors does not scale to multi-scenario deployment. We present HOLO-MPPI (High-level Offline, Low-level Online MPPI), a multi-scenario motion planning framework that combines high-level policy learning with low-level stochastic optimal control. Offline, we learn a high-level policy that proposes scenario-robust plans in an abstract action space, with a learned world model for online rollout. Online, the policy serves as a data-driven prior generator that parameterizes MPPI's sampling distribution conditioned on the current observation and goal. MPPI then optimizes low-level control sequences around this prior in real time to adapt to local disturbances. We instantiate HOLO-MPPI in autonomous driving by designing an effective high-level action space and tailored model architectures. Our evaluation across diverse driving scenarios shows that HOLO-MPPI improves upon MPPI and end-to-end RL baselines while maintaining real-time control.

24.
arXiv (CS.AI) 2026-06-17

Volterra Generative Models

arXiv:2606.18071v1 Announce Type: cross Abstract: Score-based diffusion models typically use Brownian perturbations, which provide tractable reverse-time dynamics but impose memoryless noising. We introduce Volterra generative models, a continuous-time score-based framework whose forward process injects path-dependent noise through fractional kernels. To handle the non-Markovian and non-semimartingale dynamics, we construct finite-dimensional Markovian lifts using Gaussian quadrature in both regimes and a hybrid finite-difference exponential approximation in the smooth regime. We prove squared error bounds, derive an augmented linear-Gaussian forward process, and show that the learning can remain data-dimensional by considering residual states and analytic auxiliary Gaussian scores. We also identify covariance and reverse-time degeneracies caused by shared Brownian factors and signed smooth-regime weights. The degeneracy motivates stabilized conditioning and, for stiff larger lifts, a Gaussian-bridge reconstruction sampler. Experiments on MNIST and CIFAR-10 show that persistent fractional perturbations with small Markovian lifts can improve score-based generation on MNIST and provide a promising extension to natural images, while the bridge sampler provides a stability mechanism for larger lifts.

25.
arXiv (CS.AI) 2026-06-11

Sparse probes and murky physics: a case study of interpretability challenges in a foundation model for continuum dynamics

arXiv:2606.11657v1 Announce Type: cross Abstract: Generative AI emulators are increasingly used in scientific domains where we already have strong theory, benchmarks, and physical intuition. This raises a central evaluation and interpretability question: when a foundation-style model can reproduce known continuum dynamics, what internal mechanism supports that behavior, is the internal behaviour consistent with known physics, and how does it relate to where the emulator succeeds or fails? We investigate a cross-domain foundation model for continuum dynamics, Walrus by Polymathic, using mechanistic interpretability guided by physical principles. We apply a sparse autoencoder (SAE) to probe a selected layer, and address the practical challenge of triaging a large feature set (over 20,000) using enstrophy as a physically grounded metric. As a deliberately simple testbed, we focus on shear flow and compare feature recruitment across multiple shear-flow setups, i.e. parameter values in the numerical simulation. Across setups we find evidence of piecewise consistency, with subsets of features recurring in similar roles, but this structure is intermittent and does not map cleanly onto standard physical decompositions. In parallel, direct comparisons between numerical simulation and the emulator reveal systematic output-level discrepancies, including regimes where energy/structures become too diffuse or too localized. We connect parts of these discrepancies to changes in specific SAE feature usage. Our work highlights open questions for scientific foundation models: how to robustly prioritize mechanistically meaningful features, how to separate stable structure from analysis artifacts (including single-layer and SAE limitations), and how to use established benchmarks to decide when "different" internal representations are genuinely informative rather than merely effective.