Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-16

Validation of a Smartphone-Image-Based Computer-Vision Model for Lean Mass and Body Fat Estimation Against Dual-Energy X-ray Absorptiometry

Introduction Body composition, rather than body weight alone, is an increasingly important health metric, and preservation of lean mass has become a central concern in obesity treatment, aging, and chronic disease management. Dual-energy X-ray absorptiometry (DXA) provides accurate assessment of fat and lean tissue, but its cost and logistical requirements limit repeated measurement. Computer-vision approaches show promise for estimating adiposity from smartphone images, but lean-mass estimation remains less established. Methods We evaluated a computer-vision body composition model, applied to consumer-grade smartphone photographs, against DXA in a held-out validation sample of 195 adults from an ongoing cross-sectional study. Body fat percentage and total lean mass percentage were co-primary outcomes; for total lean mass percentage, an image-only configuration (no added covariates) was pre-specified as primary. Agreement was quantified using Lin's concordance correlation coefficient (CCC) as the lead statistic, with Pearson correlation, mean absolute error, root mean square error, mean bias, and Bland-Altman limits of agreement. In secondary analyses, appendicular lean mass and total lean mass percentage were each estimated with and without routine anthropometric and demographic inputs (body weight, height, age, and sex). Results Total lean mass percentage agreed with DXA from image features alone (CCC 0.916). Body fat percentage, estimated with routine inputs added, agreed at least as closely (CCC 0.930). Adding routine inputs barely changed agreement for total lean mass percentage but markedly improved it for appendicular lean mass, an absolute quantity that scales with body size. Conclusions A smartphone-image-based model estimated both body fat and lean mass with strong agreement to DXA, with lean mass percentage from image features alone. The approach needs no fixed equipment or ionizing radiation. Whether it can track change over time, including in incretin-based weight loss where lean mass preservation is a concern, was not assessed in this cross-sectional study.

02.
arXiv (quant-ph) 2026-06-16

Adiabatic preparation of a fractional quantum Hall fluid by coherently pumping atoms from a Bose-Einstein condensate

arXiv:2606.15951v1 Announce Type: cross Abstract: We propose a protocol to adiabatically prepare a many-particle fractional quantum Hall fluid of bosonic ultracold atoms exploiting a time-dependent coherent coupling of a strongly interacting atomic state with a large dilute Bose-Einstein condensate. Starting from an empty cloud, atoms with well-defined angular momentum are coherently pumped into the fluid by Raman beams with a Laguerre-Gauss profile. Compared to number-conserving schemes which rely on finite-size-induced topological gaps, we identify an adiabatic path in the Fock space which avoids crossing topological phase transitions and thus maintains a sizable adiabatic gap open at all times. The efficiency of our preparation protocol is numerically assessed for typical experimental parameters up to particle numbers that largely exceed the experimental state-of-the-art. The crucial advantage of including an anharmonic confinement is finally highlighted.

03.
arXiv (CS.CV) 2026-06-12

JointEdit3D: Feed-Forward 3D Scene Editing in a Unified Latent Space

Existing 3D scene editing methods typically rely on per-scene optimization over explicit 3D representations or cascaded edit-and-reconstruct pipelines, resulting in high test-time cost, limited 3D awareness, and structural inconsistencies. To couple appearance synthesis and geometry prediction during editing, we build on a unified RGB-geometry reconstruction-generation latent space and adapt it to feed-forward 3D scene editing. The resulting framework, JointEdit3D, performs asymmetric latent inpainting by observing only a single edited RGB reference latent and generating the remaining RGB views and edited geometry latent under source-scene anchoring. JointEdit3D introduces a dedicated SceneAnchor Branch to inject source-scene structure without forcing direct copying, and adopts edit/background-aware losses to balance edited-region fidelity with unedited-content preservation. To address the lack of paired resources for standardized 3D scene editing evaluation, we introduce SceneEdit3D-15K, a dataset with 15K paired editing samples and renderer-provided 3D annotations, together with SceneEdit3D-Bench, a curated 100-sample benchmark. Experiments show that JointEdit3D improves edited-region quality and 3D structural completeness over prior baselines while maintaining competitive background preservation.

04.
medRxiv (Medicine) 2026-06-10

Human genetic evidence links serine biosynthesis to diabetic peripheral neuropathy

Diabetic peripheral neuropathy (DPN) is a common and disabling condition for which no disease-modifying therapies are available. Glycemic and metabolic drivers do not fully explain why only a subset of individuals with diabetes develop DPN, and genetic contributors remain poorly defined. We aimed to perform a multi-population genome-wide association study (GWAS) of DPN to highlight potential new etiological pathways and therapeutic targets. Methods We performed a multi-population GWAS of neuropathy in people with and without diabetes using the VA Million Veteran Program and UK Biobank, followed by replication in the All of Us Research Program (AoU), and gene-based and gene-set analyses to identify implicated pathways. Causal relationships between circulating serine levels and DPN were further tested using two sample Mendelian randomization. To further evaluate pathogenic potential, we analyzed rare, high impact variants in GWAS implicated genes among individuals with unresolved inherited neuropathies using the GENESIS platform. Findings Among individuals with type 2 diabetes, we identified seven genome wide significant loci (p

05.
arXiv (CS.CV) 2026-06-18

Geometry-Aware Dataset Condensation for Diffusion Model Training

Dataset condensation aims to construct compact datasets from real data via synthesis or selection. However, existing approaches are ill-suited for diffusion model training: synthetic data generation often yields low-fidelity samples unsuitable for authentic modeling, while real subset selection typically fails to preserve the distributional geometry required by diffusion likelihood objectives. To address this, we propose to reformulate real subset selection as a geometry-aware distribution alignment problem. By incorporating one-sided partial optimal transport, our method selectively aligns a compact subset with the full data distribution while allowing unmatched mass in low-density regions, ensuring the preserved geometric structure necessary for effective diffusion model training. To further ensure distributional fidelity, we complement geometric alignment with lightweight feature-statistics and semantic consistency regularization. An efficient two-stage discrete optimization strategy is proposed to achieve this alignment objective. Extensive experiments across diffusion variants, subset sizes, image resolutions, and training rounds show that our method achieves superior fidelity and distributional coverage in diffusion model training. Codes are available at https://github.com/2018cx/GADC.

06.
arXiv (CS.CV) 2026-06-19

SketchKeyAnime: Reference-anchored Sparse Key-Sketch Animation Synthesis

Traditional animation production relies heavily on manual drawing and iterative refinement, particularly for key-pose design, in-betweening, and character coloring. While existing animation and video generation methods have made notable progress, they typically depend on RGB boundary frames, dense frame-wise conditions, or complete sketch sequences, limiting their applicability under low-cost input conditions. We present SketchKeyAnime, a video diffusion framework for generating structurally controllable, appearance-consistent, and temporally coherent animations from sparse key-sketch inputs. Given a single reference RGB image and a few temporally indexed key sketches, SketchKeyAnime introduces a dual-branch conditioning mechanism to encode local geometric constraints alongside semantic-temporal context. It leverages Sketch Cross Attention to fuse reference image and sketch conditions with learnable gating, and incorporates an Adaptive Weighted Loss to strengthen supervision on key-sketch frames and line-art regions. Experimental results on the Aesthetic subset of Sakuga-42M show that our approach consistently outperforms representative animation interpolation and sketch-guided generation baselines. Compared to the best-performing baseline, SketchKeyAnime reduces EDMD by 31.9\% and FVD by 9.5\%, demonstrating superior sketch fidelity and temporal coherence, while achieving the best overall performance across most quantitative metrics. These results validate the proposed framework and highlight its potential for low-cost, highly controllable animation creation.

07.
arXiv (CS.AI) 2026-06-15

SpheriCity: Designing Trustworthy Conversational AI for Sustainability Decision Support

arXiv:2606.13854v1 Announce Type: cross Abstract: We present SpheriCity, an expert-grounded conversational prototype designed to support trustworthy knowledge sensemaking from sustainability reports. City-level circularity assessment reports contain rich information about materials, infrastructure, and policy interventions, yet their length and heterogeneous structure make cross-document synthesis and comparison difficult for practitioners and researchers working on circular economy initiatives. While large language models (LLM) promise faster knowledge access and synthesis, their opaque reasoning, hallucinations, and lack of source transparency introduce risks for trust and interpretability, and require verification in high-stakes sustainability contexts. SpheriCity addresses these challenges through a provenance-first conversational agent that foregrounds evidence traceability, structured synthesis, and interaction scaffolds to support exploratory querying and cross-document synthesis across sustainability reports. We conducted a formative expert review with six sustainability experts using representative queries spanning cross-city comparison, policy summarization, and recommendation-oriented tasks. Experts evaluated responses across dimensions and provided qualitative reflections on the system's usefulness for sustainability knowledge work. Our results reveal that transparent sourcing, contextual explanation, interpretability, and alignment with expert workflow strongly shape expert trust and judgments of system usefulness. This work contributes (1) a conversational prototype for sustainability knowledge sensemaking, (2) an expert-grounded evaluation framework for assessing AI responses in high-stakes knowledge domains, and (3) design insights into how provenance, uncertainty communication, and integration in workflow influence expert users' trust in AI assistance for sustainability decision support.

08.
arXiv (CS.CV) 2026-06-16

YTClickbait21K: Human-Annotated Multimodal Dataset for YouTube Clickbait Detection Across Diverse Channels and Content Categories

Clickbait content on video-sharing platforms poses a significant challenge to information reliability, yet progress in automated detection has been constrained by the lack of large-scale, high-quality multimodal datasets. We present YTClickbait21K, a human-annotated YouTube clickbait dataset comprising 21,238 videos collected from 40 channels across 29 countries, covering diverse content categories such as news, entertainment, education, and gaming. Each sample includes structured metadata (title, description, engagement statistics) along with associated thumbnail images, enabling comprehensive multimodal analysis. To ensure annotation quality, every video was independently labeled by three annotators using a standardized decision framework that incorporates textual, visual, and cross-modal consistency cues, with final labels determined through majority voting. The dataset exhibits substantial inter-annotator agreement (k=0.65), confirming reliable labeling despite the inherent subjectivity of clickbait detection. By combining scale, annotation rigor, and multimodal richness, this dataset provides a robust benchmark for developing and evaluating machine learning models, facilitating research in cross-modal semantic understanding, and advancing automated content moderation systems.

09.
arXiv (CS.LG) 2026-06-16

Mean-Field Parallel Decoding for Discrete Diffusion Language Models

arXiv:2606.15805v1 Announce Type: new Abstract: Discrete diffusion language models enable parallel token generation, offering a pathway to low-latency decoding. However, selecting tokens independently by marginal confidence limits effective parallelism: tokens that appear reliable in isolation can form incompatible configurations when several positions are updated at once. We introduce a training-free decoding framework that coordinates these parallel updates. At each forward pass, the method assigns a commit score to each masked position and refines these scores using pairwise interactions derived from the model's predictive distributions. A variational relaxation yields a simple fixed-point update that suppresses conflicting simultaneous commitments within a single forward pass. This mechanism allows the decoder to commit more tokens in parallel while maintaining competitive generation quality. The method is lightweight, requires no auxiliary model or retraining, and drops into existing diffusion decoding pipelines without modification. Experiments on reasoning and code-generation benchmarks show consistent improvements in the quality-latency trade-off.

10.
arXiv (CS.AI) 2026-06-12

Transformer Field Theory: A Response-Theoretic Approach to Mechanistic Interpretability

arXiv:2605.25225v2 Announce Type: replace-cross Abstract: Mechanistic interpretability often studies Transformer behavior by intervening on internal activations through activation patching, causal tracing, path patching, and steering directions. This paper develops Transformer Field Theory: a response-theoretic framework in which the residual stream of a fixed forward pass is treated as a Transformer field over layer depth and token position. In this formulation, patching becomes a localized source insertion into the Transformer field, first-order sensitivity fields predict patch effects, Green functions describe downstream propagation, and patch selection is posed as an adjoint inverse problem. Empirically, we test the theory's forward response objects in GPT-2-style autoregressive Transformers. Localized Transformer-field interventions exhibit a bounded local linear regime; first-order sensitivities predict patch effects across layer-token sites; localized sources generate structured anisotropic Transformer-field propagation; high-sensitivity sites and sliced Green operators provide reduced response descriptions; and prompt-induced Transformer-field displacements partially transfer answer behavior. These results establish sensitivities, Transformer-field responses, and sliced Green operators as practical objects for organizing patching experiments, while providing the forward mathematical basis for patch-site inference and cross-scale response transfer.

11.
arXiv (CS.CL) 2026-06-15

Did You Forget What I Asked? Prospective Memory Failures in Large Language Models

作者:

Large language models often fail to satisfy formatting instructions when they must simultaneously perform demanding tasks. We study this behaviour through a prospective memory inspired lens from cognitive psychology, using a controlled paradigm that combines verifiable formatting constraints with benchmark tasks of increasing complexity. Across three model families and over 8,000 prompts, compliance drops by 2-21% under concurrent task load. Vulnerability is highly type-dependent: terminal constraints (requiring action at the response boundary) degrade most, with drops up to 50%, while avoidance constraints remain comparatively robust. A salience-enhanced format (explicit instruction framing plus a trailing reminder) recovers much of the lost compliance, restoring performance to 90-100% in many settings. Interference is bidirectional: formatting constraints can also reduce task accuracy, with one model's GSM8K accuracy dropping from 93% to 27%. In additional stacking experiments, joint compliance declines sharply as constraints accumulate. All results use deterministic programmatic checkers without an LLM-as-judge component on publicly available datasets.

12.
arXiv (CS.AI) 2026-06-16

RaBiT: Residual-Aware Binarization Training for Accurate and Efficient LLMs

arXiv:2602.05367v3 Announce Type: replace Abstract: Efficient deployment of large language models (LLMs) requires extreme quantization, forcing a critical trade-off between low-bit efficiency and performance. Residual binarization enables hardware-friendly, matmul-free inference by stacking binary ($\pm$1) layers, but is plagued by pathological feature co-adaptation. We identify a key failure mode, which we term inter-path adaptation: during quantization-aware training (QAT), parallel residual binary paths learn redundant features, degrading the error-compensation structure and limiting the expressive capacity of the model. While prior work relies on heuristic workarounds (e.g., path freezing) that constrain the solution space, we propose RaBiT, a novel quantization framework that resolves co-adaptation by algorithmically enforcing a residual hierarchy. Its core mechanism sequentially derives each binary path from a single shared full-precision weight, which ensures that every path corrects the error of the preceding one. This process is stabilized by a robust initialization that prioritizes functional preservation over mere weight approximation. RaBiT redefines the 2-bit accuracy-efficiency frontier: it achieves state-of-the-art performance, rivals even hardware-intensive Vector Quantization (VQ) methods, and delivers a $4.49\times$ inference speed-up over full-precision models on an RTX 4090. Code is available at https://github.com/SamsungLabs/RaBiT.

13.
arXiv (CS.LG) 2026-06-19

When Calibration Fails the Vulnerable Hospital: Federated Conformal Risk Control via Risk-Curve Shrinkage

arXiv:2606.20115v1 Announce Type: new Abstract: Conformal risk control (CRC) provides distribution-free guarantees on segmentation quality by calibrating a prediction-set threshold on held-out data. In federated deployments, the standard approach pools calibration scores across sites into a single threshold. We provide the first quantification, on real multi-institutional brain tumor data (FeTS-2022, 1,251 subjects, 20 institutions), showing that this naive pooled CRC protects the average hospital but violates coverage at 40% of individual institutions, with the worst site exceeding the target false-negative rate by 7.8 percentage points. The naive alternative, per-site local CRC, largely restores coverage but inflates prediction sets by 83x, rendering them clinically useless. We propose a shrinkage-based federated CRC protocol: each site transmits only its empirical risk curve (G scalars) to a server, which computes a shrinkage-regularized threshold per site. A single hyperparameter n0 smoothly trades worst-case coverage for prediction-set efficiency; leave-one-site-out sensitivity analysis identifies n0=19, achieving 2.7/20 violations at 2.0x stretch. We further show that direct Lagrangian optimization of coverage budgets fails, concentrating risk on vulnerable hospitals, and that the finite-sample correction term is essential: removing it triples violations. The marginal CRC guarantee is preserved by construction under the stated site-mixture assumption; per-site coverage is validated across four targets with three seeds. No patient-level images, masks, or per-volume scores leave any site.

15.
arXiv (CS.AI) 2026-06-15

Active Inference for Adaptive Traffic Signal Control in Noisy Nonstationary IoT Environments

arXiv:2606.13698v1 Announce Type: cross Abstract: Urban traffic signal control at IoT-instrumented intersections must remain effective under sensor occlusion, weather attenuation, and nonstationary demand. Conventional controllers degrade under these conditions, and learned policies remain difficult to audit. To address these challenges, we propose an active inference controller for a four-arm signalized intersection that dynamically selects phases by minimizing expected free energy (EFE) over Gaussian beliefs about per-direction congestion levels, yielding a fully traceable decision pipeline. We benchmark the controller in a SUMO traffic simulator against a rule-based heuristic and a deep Q-network (DQN) across four scenarios that progressively increase noise and nonstationarity, spanning sensor occlusion, adverse weather, and stochastic accidents. Across 100 independent random evaluations per scenario, active inference attains the lowest idle times and CO2 emissions in the noisiest scenarios (56,977 s and 29.12 kg vs. 71,741 s and 30.56 kg for DQN). These gains come at a modest cost in bus priority service rate and phase switch frequency.

16.
arXiv (CS.AI) 2026-06-11

Sparse probes and murky physics: a case study of interpretability challenges in a foundation model for continuum dynamics

arXiv:2606.11657v1 Announce Type: cross Abstract: Generative AI emulators are increasingly used in scientific domains where we already have strong theory, benchmarks, and physical intuition. This raises a central evaluation and interpretability question: when a foundation-style model can reproduce known continuum dynamics, what internal mechanism supports that behavior, is the internal behaviour consistent with known physics, and how does it relate to where the emulator succeeds or fails? We investigate a cross-domain foundation model for continuum dynamics, Walrus by Polymathic, using mechanistic interpretability guided by physical principles. We apply a sparse autoencoder (SAE) to probe a selected layer, and address the practical challenge of triaging a large feature set (over 20,000) using enstrophy as a physically grounded metric. As a deliberately simple testbed, we focus on shear flow and compare feature recruitment across multiple shear-flow setups, i.e. parameter values in the numerical simulation. Across setups we find evidence of piecewise consistency, with subsets of features recurring in similar roles, but this structure is intermittent and does not map cleanly onto standard physical decompositions. In parallel, direct comparisons between numerical simulation and the emulator reveal systematic output-level discrepancies, including regimes where energy/structures become too diffuse or too localized. We connect parts of these discrepancies to changes in specific SAE feature usage. Our work highlights open questions for scientific foundation models: how to robustly prioritize mechanistically meaningful features, how to separate stable structure from analysis artifacts (including single-layer and SAE limitations), and how to use established benchmarks to decide when "different" internal representations are genuinely informative rather than merely effective.

17.
arXiv (CS.CV) 2026-06-12

CRAG: Can 3D Generative Models Help 3D Assembly?

Most existing 3D assembly methods treat the problem as pure pose estimation, rearranging observed parts via rigid transformations. In contrast, human assembly naturally couples structural reasoning with holistic shape inference. Inspired by this intuition, we reformulate 3D assembly as a joint problem of assembly and generation. We show that these two processes are mutually reinforcing: assembly provides part-level structural priors for generation, while generation injects holistic shape context that resolves ambiguities in assembly. Unlike prior methods that cannot synthesize missing geometry, we propose CRAG, which simultaneously generates plausible complete shapes and predicts poses for input parts. Extensive experiments demonstrate state-of-the-art performance across in-the-wild objects with diverse geometries, varying part counts, and missing pieces. Project Page: https://ai4ce.github.io/CRAG/

18.
arXiv (CS.CV) 2026-06-11

Real-Time Neural Hair Denoising

We propose a lightweight real-time method for reconstructing strand-based hair G-Buffers from severely undersampled rasterized inputs. Our pipeline first applies neural spatial reconstruction and temporal accumulation to recover hair coverage, i.e., fractional hair visibility within a pixel, and tangent. It then uses a tangent-guided reconstruction step to complete the position, which is subsequently used for physically based deferred hair shading. We evaluate our method across a diverse set of hairstyles, including straight, wavy, afro, and ponytail styles, under both static and dynamic scenarios. Our method achieves higher hair reconstruction quality than existing hair-specific denoising techniques and general industrial neural reconstruction solutions such as DLSS and FSR.

19.
arXiv (CS.CV) 2026-06-12

DIMOS: Disentangling Instance-level Moving Object Segmentation

Moving instance segmentation (MIS) attracts increasing attention due to its broad applications in traffic surveillance, autonomous driving, and animal tracking. Event cameras record asynchronous brightness changes, providing high temporal resolution and dynamic range, which makes them highly sensitive to motion information. By fusing event and image features, motion cues from events can complement spatial details from images, enhancing the performance of MIS. However, current multimodal MIS methods still struggle to segment small moving instances, as event cameras often yield sparse features under limited resolution. Moreover, event features entangle appearance attributes with motion cues, which further restricts effective cross-modal fusion. To address these challenges, we first propose a dual-disentangling feature extraction framework that separates and extracts appearance and motion information within both image and event modalities, thereby improving feature density. Subsequently, a multi-granularity cross-modal alignment is introduced to align distributionally and semantically consistent features across modalities, enabling more effective fusion with rich spatial and temporal details. The experiment results demonstrate that our method achieves state-of-the-art performance in multimodal MIS, especially for small instances under challenging conditions such as fast motion and low-light settings.

20.
arXiv (CS.CV) 2026-06-12

Spatially Grounded Concept Bottleneck Models via Part-Factorized Attention

Concept bottleneck models (CBMs) predict a layer of human-named attributes before predicting a class, which makes their decisions auditable. On fine-grained recognition tasks the concept heads are usually free to attend anywhere in the image, so a head named for one body region can be satisfied by evidence on another. This work studies a part-factorized CBM that removes that freedom by construction. The method has three components built on a frozen DINOv3 vision transformer. A learned foreground gate, trained on DINOv3 patch features, suppresses background patches inside the part attention. A set of part queries cross-attends to patch features and each of the 312 CUB attributes is routed, through a fixed concept-to-part map, to read only from the part token its name implies. A learnable two-dimensional Gaussian prior, injected additively in log space into the attention logits, breaks the permutation symmetry among part queries; its means are initialized from the dataset-average keypoint location of each part, which requires no per-image keypoint supervision at training or test time. On CUB-200-2011 the spatial-prior model matches a fully supervised baseline (88.85% versus 88.95% top-1) while raising pointing accuracy by 16 points (52.6% versus 36.4%). Replacing bounding-box supervision with a PCA foreground target and combining it with the Gaussian prior removes all per-image supervision and reaches 88.6% top-1 at about 70% pointing accuracy. A keypoint-fraction sweep shows that 0.5% of the training set (about 27 images) suffices to initialize the prior with no measurable loss. Removing part identity entirely is the harder case: without any spatial prior, pointing accuracy collapses to $2.9\%$.

21.
arXiv (CS.CV) 2026-06-17

Do We Really Need Diffusion? A Fast U-Net for Paired Medical Image Translation

Magnetic resonance imaging-signal fat fraction (MRI-SFF) quantifies tissue fat and serves as an established biomarker for metabolic and musculoskeletal disorders. The acquisition requires, however, specialized MRI sequences, which are not available routinely. We investigate whether SFF can be estimated from widely available T2-weighted (T2w) MRI via image-to-image translation (I2I). We further compare a lightweight 4-level U-Net to a state-of-the-art Denoising Diffusion Probabilistic Model (DDPM) using a dataset of 230 048 paired 2D images (183 517 train, 23 621 val, 22 910 test) from the German National Cohort (NAKO). Both models clearly outperform the identity baseline (Pearson correlation r = 0.769, mean absolute error MAE = 0.070 +/- 0.054), which confirms that the models learn a non-trivial cross-modal mapping. Interestingly, the lightweight U-Net outperforms the DDPM in both correlation (r = 0.975 vs. 0.962) and error (MAE = 0.014 +/- 0.015 vs. 0.019 +/- 0.019), while reducing inference time by a factor of 208 (25.2 ms vs. 5 227.2 ms per image using 50 Denoising Diffusion Implicit Model (DDIM) steps). The strong clinical performance at substantially reduced computational cost enables real-time clinical use.

22.
arXiv (CS.LG) 2026-06-18

Task-Restricted Symmetries in Recurrent Weight Space

arXiv:2606.18457v1 Announce Type: new Abstract: Recurrent networks can contain substantial functional redundancy in weight space: changing a recurrent matrix may leave the input-output rollout nearly unchanged on a task distribution, while similar-scale changes can destroy the same behavior. We study this redundancy in one-layer tanh RNNs using ordered real Schur coordinates. The Schur form separates spectral blocks from directed nonnormal couplings, giving a diagnostic basis for structured ablations that keep the input and readout maps fixed. In a fixed-length copy task, selected nonnormal Schur couplings can be removed with little loss in some trained solutions, whereas other couplings are necessary for accurate autonomous replay. Across flip-flop, sine generation, and context-dependent integration, the loss-preserving ablation profile varies across tasks and trained solutions. These results identify candidate approximate functional invariances, not universal symmetries of recurrent weight space. Schur-coordinate ablations provide a practical diagnostic for which structured perturbations preserve a trained recurrent solution and which ones disrupt its computation.

23.
Nature (Science) 2026-06-17

Mapping the neuronal building blocks of human language with language models

作者:

Humans can convey new and highly diverse information through language. This ability to form and combine words into elaborate phrases and sentences enables us to express inexhaustible meanings and is fundamental to human cognition1–5. However, understanding the microscopic cellular building blocks and cortical landscape that precisely underlie human language has remained a challenge. Here we used wide-scale single-neuronal recordings combined with natural language processing models to identify fine-grained linguistic representations across the human frontotemporal cortex during language production. We find that, whereas certain neurons represented the detailed grammatical relationships between words or their parts of speech, others tracked the sentences’ higher-order syntactic structure, their phrase transitions and sequence. Collectively, these neurons reliably captured the words’ syntactic and semantic properties but also dynamically incorporated their specific sentence contexts, therefore enabling them to encode information combinatorially and at highly granular levels of detail. We show how these cell populations were locally organized and how their microscale representations differed from that of their wider field potential patterns. We also show how these neurons were distributed broadly across the frontotemporal cortex, but how their ability to encode linguistic information was left-lateralized and varied between cortical regions. Together, these findings identify some of the most basic cellular building blocks by which linguistic information is encoded in humans and begin to define the cortical landscape of language at a combined micro (cellular), meso (local population) and macro (regional) scale. Wide-scale recordings reveal neurons in the human brain that encode fundamental components of language such as the grammatical relationships between words, their parts of speech and the higher-order syntactic structure of phrases and sentences.

24.
arXiv (CS.AI) 2026-06-19

Multi-LCB: Extending LiveCodeBench to Multiple Programming Languages

arXiv:2606.20517v1 Announce Type: new Abstract: LiveCodeBench (LCB) has recently become a widely adopted benchmark for evaluating large language models (LLMs) on code-generation tasks. By curating competitive programming problems, constantly adding fresh problems to the set, and filtering them by release dates, LCB provides contamination-aware evaluation and offers a holistic view of coding capability. However, LCB remains restricted to Python, leaving open the question of whether LLMs can generalize across the diverse programming languages required in real-world software engineering. We introduce Multi-LCB, a benchmark for evaluating LLMs across twelve programming languages, including Python. Multi-LCB transforms Python tasks from the LCB dataset into equivalent tasks in other languages while preserving LCB's contamination controls and evaluation protocol. Because it is fully compatible with the original LCB format, Multi-LCB will automatically track future LCB updates, enabling systematic assessment of cross-language code generation competence and requiring models to sustain performance well beyond Python. We evaluated 24 LLMs for instruction and reasoning on Multi-LCB, uncovering evidence of Python overfitting, language-specific contamination, and substantial disparities in multilingual performance. Our results establish Multi-LCB as a rigorous new benchmark for multi-programming-language code evaluation, directly addressing LCB's primary limitation and exposing critical gaps in current LLM capabilities.

25.
arXiv (CS.CV) 2026-06-12

Learning Task-Aware Sampling with Shared Saliency through Density-Equalizing Mappings

In image and surface-based learning tasks, convolutional features are typically extracted using receptive fields that are sampled uniformly across the entire domain. However, informative structures are rarely distributed uniformly in practice and are often concentrated in localized regions. Such phenomena are particularly common in medical imaging, where pathological changes are spatially confined. Consequently, uniform convolution allocates equal computational effort to both informative and uninformative regions, resulting in inefficient feature extraction and suboptimal utilization of model capacity. To address this issue, we propose a framework for task-adaptive sampling that dynamically redistributes computational attention according to the spatial importance of the data. Specifically, we introduce the Density-Equalizing Convolutional Neural Network (DECNN), which employs density-equalizing mappings to guide convolution through a learned density function. The density function encodes the relative importance of different regions and induces a transformation that enlarges informative areas while compressing less relevant ones. As a result, convolutional receptive fields are redistributed non-uniformly over the domain, enabling denser sampling in task-relevant regions. By coupling this importance-driven transformation with convolution, DECNN performs adaptive feature extraction that focuses computational resources on informative structures. This leads to more efficient use of model capacity, yielding a lightweight yet expressive architecture while simultaneously producing an interpretable saliency map. Experiments on image classification and craniofacial surface analysis demonstrate that DECNN achieves competitive or superior performance with fewer parameters, accurately identifies task-relevant regions, and remains robust under complex geometric variations.