Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-12

Deep Learning-based Algebraic Reynolds Stress Closures for RANS Simulations of Turbulent Flows

arXiv:2605.26358v2 Announce Type: replace-cross Abstract: Turbulence is ubiquitous in engineering and science, yet direct simulation is prohibitively expensive. The Reynolds-averaged Navier-Stokes (RANS) equations provide savings exceeding ten orders of magnitude but introduce unclosed terms (the closure problem). Offline-trained machine-learning (ML) closures suffer distribution shift in predictive simulations, while ML methods that bypass the governing equations struggle to generalise from scarce high-fidelity data. We develop a physics-derived deep learning closure model for RANS, the Deep Algebraic Reynolds Stress Model (DARSM), which can be trained on small datasets and accurately generalise across Reynolds numbers, to unseen geometries, and to different flow regimes. A neural network maps flow invariants to empirical parameters in an implicit algebraic Reynolds stress equation, derived from the Reynolds stress transport equations under the weak-equilibrium assumption, imposing physics-based structure on the ML closure. End-to-end optimisation through the governing PDEs and the coupled implicit closure eliminates distribution shift, but both unrolled and implicit automatic differentiation fail on the stiff coupled solver. We derive adjoint equations that exploit the solver's implicit-explicit structure for efficient optimisation. On canonical square-duct and periodic-hill benchmarks, DARSM reduces average test velocity error over baseline RANS by $2$-$4\times$ across Reynolds number, geometries, and flow regimes, with peak case-level reductions of $12\times$. The model trained on attached, anisotropy-dominated flows (square duct) accurately generalises without retraining to separated flows (periodic hills), a regime change in the underlying physics. DARSM also outperforms five established ML methods: offline training, tensor-basis neural networks, field-inversion machine learning, DeepONets, and physics-informed neural networks.

02.
arXiv (CS.CV) 2026-06-12

Point-Wise Geometry-Aware Transformer for Partial-to-Full Point Cloud Registration in Computer-Assisted Surgery

Partial-to-full registration remains challenging due to varying overlap ratios, fluctuating point densities, and the presence of noise. While transformers have shown strong potential for point cloud processing, prior methods typically confine them to global context aggregation, overlooking fine-grained local geometry crucial for accurate correspondence. We propose GAPR-Net, a learning-based point cloud registration framework with a coarse-to-fine architecture that combines convolution and transformer modules, in which local and global information is fused between the partial and full point clouds using a cross-attention mechanism. To achieve this, a transformation-invariant point-wise geometric feature representation is proposed, which can robustly capture relative geometric features for individual points with respect to their neighboring points. To evaluate the effectiveness of the proposed approach, experiments are conducted on four geometrically distinct bones, including the tibia, femur, pelvis, and thoracic cartilage. The overall registration recall reaches 94.2\%, the method results in a low RMSE of 1.992 mm and $R^2$ values of 0.908 and 0.974 for rotation and translation, respectively. The results demonstrate that the proposed method effectively addresses the partial-to-full point cloud registration problem. The proposed method enables highly accurate 3D point cloud registration using partial observation, providing a critical foundation for precise surgical navigation and robotic interventions in computer-assisted surgery. The code will be accessed after the double-blind review process.

03.
arXiv (CS.LG) 2026-06-16

DAL: A Practical Prior-Free Black-Box Framework for Piecewise Stationary Bandits

arXiv:2501.19401v5 Announce Type: replace Abstract: We introduce a practical, black-box framework termed Detection Augmented Learning (DAL) for the problem of piecewise stationary bandits without knowledge of the underlying non-stationarity. DAL accepts any stationary bandit algorithm with order-optimal regret as input and augments it with a change detector, enabling applicability to all common bandit variants. Extensive experimentation demonstrates that DAL consistently surpasses all state-of-the-art methods across diverse non-stationary scenarios, including synthetic benchmarks and real-world datasets, underscoring its versatility and scalability. We provide theoretical insights into DAL's strong empirical performance, complemented by thorough empirical validation.

04.
arXiv (quant-ph) 2026-06-17

Projected logical ensembles in surface codes via the random-matrix theory of quantum dots

arXiv:2606.17140v1 Announce Type: new Abstract: Measurements underpin active quantum error correction (QEC) and have been recognized as a source of novel measurement-induced many-body phenomena. Here, we study the statistical properties of post-measurement logical states arising in QEC on topological codes subject to deterministic transversal unitary gates. Upon syndrome extraction followed by maximum-likelihood decoding, a Born-weighted ensemble arises which we dub the "projected logical ensemble" (PLE). Focusing on surface codes subject to uniform single-qubit Pauli-$X$ rotations, we characterize the measurement-induced randomness of the PLE. To this end, we show that for a code with a single logical qubit, the PLE is isomorphic to an ensemble of scattering matrices describing mesoscopic quantum dots obtained from a 2D Majorana network model with suitable boundary conditions. We uncover regimes where these quantum dots are chaotic such that their scattering matrices are well-described by random matrix theory. In these regimes, the PLE approaches a universal ensemble that is maximally random up to symmetry and decoder-induced constraints. The symmetry constraints, set by stabilizer and logical operator weights, realize Altland-Zirnbauer classes D or DIII, which we both illustrate. Our results establish a fundamental connection between emergent universality concepts in mesoscopic physics, quantum many-body systems, and QEC.

05.
arXiv (CS.LG) 2026-06-15

Machine-learned particle flow as a foundation model for collider physics

arXiv:2606.14373v1 Announce Type: cross Abstract: The workflow from particle collision to physics analysis passes through a series of reconstruction steps that are traditionally modular and disconnected, with no shared representation linking low-level detector data to high-level analysis tasks. We show that casting event reconstruction as a machine learning problem naturally produces such a shared representation. We repurpose a machine learning model trained for particle-flow reconstruction (MLPF) to perform three distinct analysis tasks: jet flavor identification, jet energy regression, and missing momentum regression. By appending the per-particle latent representations learned during reconstruction as additional input features, we substantially improve over baselines that use kinematic features alone. We further demonstrate that a single linear layer trained using only the latent representations achieves competitive performance against state-of-the-art baseline architectures, and outperforms the baseline for missing momentum regression with approximately 35 times fewer parameters. These results demonstrate that the latent representations learned during reconstruction encode essential physics information needed for downstream analysis, establishing MLPF as a foundation model and offering a concrete step toward an end-to-end pipeline from detector data to physics analysis.

06.
arXiv (quant-ph) 2026-06-11

Quantum repeater segment with free-space coupled co-trapped ions using telecom photon interference

arXiv:2606.12313v1 Announce Type: new Abstract: A quantum repeater segment is a basic building block of a quantum repeater, generating buffered entanglement of quantum memories to connect quantum repeater cells. It also enables the connection between quantum computers. In the implementation we present here, photons emitted from two co-trapped free-space coupled $^{40}$Ca$^+$ ions are converted to the telecom-C band and interfered after transmission over 440$\,$m of optical fiber (220$\,$m per arm), where a photonic Bell measurement is performed to create entanglement between the memories. With this scheme we generate an entangled $\left|\Psi^+\right\rangle$ Bell state with $\ge 68(8)\,$% fidelity, highlighting trapped $^{40}$Ca$^+$ ions as a promising quantum repeater hardware platform.

07.
arXiv (CS.LG) 2026-06-16

ML Inference Scheduling with Predictable Latency

arXiv:2512.18725v3 Announce Type: replace Abstract: Machine learning (ML) inference serving systems can schedule requests to improve GPU utilization and to meet service level objectives (SLOs) or deadlines. However, improving GPU utilization may compromise latency-sensitive scheduling, as concurrent tasks contend for GPU resources and thereby introduce interference. Given that interference effects introduce unpredictability in scheduling, neglecting them may compromise SLO or deadline satisfaction. Nevertheless, existing interference prediction approaches remain limited in several respects, which may restrict their usefulness for scheduling. First, they are often coarse-grained, which ignores runtime co-location dynamics and thus restricts their accuracy in interference prediction. Second, they tend to use a static prediction model, which may not effectively cope with different workload characteristics. In this paper, we evaluate the potential limitations of existing interference prediction approaches, finding that coarse-grained methods can lead to noticeable deviations in prediction accuracy and that static models degrade considerably under changing workloads.

08.
arXiv (CS.AI) 2026-06-17

RLRC: Reinforcement Learning-based Recovery for Compressed Vision-Language-Action Models

arXiv:2506.17639v2 Announce Type: replace-cross Abstract: Vision-Language-Action models (VLA) have demonstrated remarkable capabilities and strong potential in complex robotic manipulation. However, their large parameter sizes and high inference latency hinder real-world deployment, especially on resource-constrained platforms. To address this, we conduct a systematic empirical study of model compression for VLAs. Building on these insights, we present RLRC, a three-stage compression and recovery pipeline consisting of structured pruning, performance recovery via SFT and RL, and subsequent quantization. The RL stage incorporates a critic warm-up strategy and BC loss regularization to stabilize training and preserve policy behavior. RLRC achieves up to an 8 times memory reduction and 2.3 times inference speedup while maintaining the original task success rate. Extensive experiments across multiple VLA backbones show that RLRC consistently outperforms existing compression baselines, highlighting its effectiveness for on-device deployment. Project website: https://rlrc-vla.github.io

09.
arXiv (CS.LG) 2026-06-11

Open Materials Generation with Inference-Time Reinforcement Learning

arXiv:2602.00424v2 Announce Type: replace Abstract: Continuous-time generative models for crystalline materials enable inverse materials design by learning to predict stable crystal structures, but incorporating explicit target properties into the generative process remains challenging. Policy-gradient reinforcement learning (RL) provides a principled mechanism for aligning generative models with downstream objectives but typically requires access to the score, which has prevented its application to flow-based models that learn only velocity fields. We introduce Open Materials Generation with Inference-time Reinforcement Learning (OMatG-IRL), a policy-gradient RL framework that operates directly on the learned velocity fields and eliminates the need for the explicit computation of the score. OMatG-IRL leverages stochastic perturbations of the underlying generation dynamics preserving the baseline performance of the pretrained generative model while enabling exploration and policy-gradient estimation at inference time. Using OMatG-IRL, we present the first application of RL to crystal structure prediction (CSP). Our method enables effective reinforcement of an energy-based objective while preserving diversity through composition conditioning, and it achieves performance competitive with score-based RL approaches. Finally, we show that OMatG-IRL can learn time-dependent velocity-annealing schedules, enabling accurate CSP with order-of-magnitude improvements in sampling efficiency and, correspondingly, reduction in generation time. The OMatG-IRL code is included in a new release of the Open Materials Generation (OMatG) framework available at https://github.com/FERMat-ML/OMatG.

10.
arXiv (CS.AI) 2026-06-17

FacProcessTwin: An LLM-Based System for Process Twin Development

arXiv:2606.17666v1 Announce Type: cross Abstract: Process twins provide real-time representations of entire production processes. By capturing how process steps interact, rather than monitoring a single machine in isolation as an asset-based digital twin does, they have the potential to drive efficiency gains across the whole process. However, developing a process twin is costly. It requires accurately modelling the entire production process: its process steps, the equipment and product-specific settings each step uses, and its process variations. The resulting model must then be bound to live operational data. We present FacProcessTwin, a system that leverages a large language model (LLM) to reduce this development time, building a process twin from a plant's process documentation and natural-language input from an operator. FacProcessTwin generates this complete process model and then automatically binds its process steps to live operational data. The generated model and its data bindings are rendered as an interactive process diagram through which manufacturing personnel can monitor and correct the system's autonomous decisions, such as resolving uncertainty at safety-critical binding steps. We evaluate FacProcessTwin through a real-world case study of an Australian food manufacturer, covering 16 production process flows that span chilled, frozen, and aseptic shelf-stable product categories and include process variations within the same product. The results show that FacProcessTwin generates these process models accurately (a mean F1 of 95.2% against ground truth) and builds each twin in roughly a sixth of the manual time. Its human-in-the-loop governance then keeps the safety-critical bindings correct: at ambiguous tags where a single-pass baseline silently mis-binds 75.0% of the time, FacProcessTwin defers to the operator and mis-binds none.

11.
arXiv (CS.LG) 2026-06-11

Last-Iterate Convergence of Optimistic Multiplicative Weight Update

arXiv:2606.11773v1 Announce Type: cross Abstract: Optimistic Gradient Descent Ascent (OGDA) and Optimistic Multiplicative-Weights Update (OMWU) are two very popular algorithms to solve convex/concave saddle-point problems, where OMWU is the non-Euclidean, entropic version of OGDA. It is known since the '80s that the last iterate of OGDA asymptotically converges to a saddle point in smooth problems. On the other hand, it is unknown if OMWU has the same property. In this paper, I show that OMWU converges asymptotically for smooth convex-concave saddle-point problems, with a small enough constant learning rate. The result does not require uniqueness, strict complementarity, an error bound, or initialization near a solution. The main new ingredient is a boundary argument showing that every cluster point satisfies the inactive-coordinate KKT inequalities. The boundary argument was discovered with assistance from ChatGPT and is documented in the appendix.

12.
arXiv (CS.CV) 2026-06-15

A Robust Point Cloud Analysis Framework Inspired By Primary Visual Cortex

Despite significant advancements in point cloud analysis, reducing energy consumption and improving robustness remain understudied, largely due to the inherent limitations of Convolutional Neural Networks (CNNs). To address this issue, we draw inspiration from the primary visual cortex and propose a Dendritic-Connected Continuous-Coupled Neural Network (DC-CCNN), a novel Brain-Inspired Neural Network (BINN) architecture for point cloud analysis. By combining discrete and continuous encoding, our design replaces traditional Multilayer Perceptrons (MLPs) with more efficient and robust BINNs. Building upon this framework, we further propose an extended model, DC-CCNN++, to improve robustness under complex corruption conditions. Specifically, we introduce a Neuro-Inspired Robust Modulation-and-Readout Module (NRMR) to enhance feature stability and decision robustness through global-context gain modulation and dual-code evidence integration. We also design a Cortically Inspired Progressive Variability Training (CPVT) strategy, which progressively exposes the model to structured environmental variability while preserving stable clean-sample anchors during training. Experimental results show that DC-CCNN++ improves the performance of brain-inspired networks on point cloud analysis while maintaining performance comparable to state-of-the-art methods. Compared with the original DC-CCNN, it achieves stronger results on both classification and part segmentation, and exhibits enhanced robustness against sparsity, occlusion, Gaussian noise, salt-and-pepper noise, and spatial transformations. With its efficiency, robustness, and biologically grounded design, DC-CCNN++ provides a promising alternative to traditional deep learning methods for point cloud analysis. Code is available at https://anonymous.4open.science/r/DC-CCNNpp-44E3.

14.
arXiv (CS.LG) 2026-06-17

From Compression to Deployment: Real-Time and Energy-Efficient FastGRNN on Ultra-Constrained Microcontrollers

arXiv:2606.17249v1 Announce Type: cross Abstract: The dominant trajectory of modern machine learning has been to scale up: larger models, larger accelerators, larger memory budgets. Yet a multi-year global semiconductor supply constraint and the growing energy and carbon cost of always-online inference expose the fragility of this trajectory and motivate the opposite direction: refactoring AI and ML algorithms to fit the small, ubiquitous microcontrollers already in mass production in wearables, sensors, and edge appliances. We present an end-to-end open-source reproduction of FastGRNN, a compact gated recurrent cell, deployed on two bare-metal targets: the 8-bit Arduino (ATmega328P) and the 16-bit MSP430 (no hardware multiplier; 16 KB Flash; 512 B SRAM). Our compression pipeline combines low-rank weight factorization, iterative hard-thresholding sparsity, and per-tensor Q15 post-training quantization with explicit activation calibration. The deployed model occupies 566 bytes of weights and achieves macro F1 = 0.918 (seed 0; five-seed Q15 mean 0.853+-0.107) on the HAPT test set. It matches a PyTorch reference at 100% prediction agreement across 3,399 test windows (MCU seed 0; 99.91-100% C-equivalent across five seeds). Both platforms sustain real-time 50 Hz streaming inference (9.21 ms per sample on Arduino; 13 ms on MSP430), where a 256-entry sigmoid/tanh look-up table delivers a 30.5x speedup on the multiplier-less MSP430. Four contributions extend the original FastGRNN paper: (i) cross-platform bit-equivalent deterministic inference; (ii) characterization of recurrent warm-up latency (median 74 samples, 1.48 s; worst-case 125 samples, 2.50 s over 100 test windows); (iii) a deployable look-up-table recipe for multiplier-less embedded targets; and (iv) hardware energy characterization showing 17.7 mW active inference power,

15.
arXiv (CS.CV) 2026-06-19

OTCHA: Optimal Transport-driven Confidence-aware Latent Hub Alignment for Multi-View Medical Image Classification

Multi-view imaging, such as mammography and chest radiography, is a standard component of clinical practice. However, medical images are often unregistered and contain view-specific artifacts or irrelevant background cues that can obscure diagnostically relevant findings. Many existing methods directly fuse per-view representations, allowing such irrelevant content to contaminate the fused embedding and reducing robustness under varying view configurations. We propose OTCHA, a confidence-aware latent hub token alignment module based on optimal transport (OT) that refines patch tokens before fusion for multi-view classification. OTCHA introduces a set of learnable latent hub tokens shared across views. For each view, we compute an OT plan between patch tokens and hub tokens that jointly considers feature similarity and geometry, and augment the OT formulation with token-conditional dustbins to enable partial matching and discard irrelevant tokens. The resulting transport plan provides token-wise matching confidence, which gates hub-mediated message passing and weights a novel optimal-transport-based representation alignment loss to stabilize refinement. Experiments on three multi-view medical image datasets demonstrate consistent improvements over competing baselines across diverse anatomies and view configurations. Our code is available at https://github.com/labhai/OTCHA.

16.
arXiv (CS.AI) 2026-06-16

From Detection to Recovery: Operational Analysis on LLM Pre-training with 504 GPUs

arXiv:2605.09370v5 Announce Type: replace-cross Abstract: Large-scale AI training is fundamentally a distributed systems problem, where hardware failures are routine operating conditions rather than rare exceptions, yet public operational evidence from production training clusters remains limited. This report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The environment is cross-organizational: five parties (SKT, Upstage, Lablup, NVIDIA Korea, VAST Data) share a unified monitoring pipeline. This enabled joint diagnosis of a 60-node-scale storage I/O bottleneck absent in 2-4-node tests, a production-scale phenomenon no single team could isolate alone. We perform three quantitative analyses yielding four findings. First, over 751 Prometheus metrics and 10 XID-identified GPU failures, no single metric is consistently dominant across failure types, motivating multi-signal detection. Second, 523 checkpoint events trace the save/load path from GPU VRAM to the NFS server: restart loading reaches 21.5% of maximum read bandwidth (700 GB/s) and save bursts 16.0% of maximum write bandwidth (250 GB/s), with NFS/RPC queueing and transport-layer backlog rising together. Third, across 224 sessions over 73 days, node exclusions concentrate so the top 3 of 63 nodes account for over 50%. Fourth, auto-retry chain analysis shows a 33.3% success rate over 12 chains (73 attempts), 2.7x the 12.5% manual rate, with a median retry interval of 11 minutes (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

17.
arXiv (CS.LG) 2026-06-19

Do Vision-Language Models Understand 3D Scenes or Just Catalogue Objects?

arXiv:2605.20448v2 Announce Type: replace-cross Abstract: Vision-language models reliably name objects in a scene, but do they represent the 3D layout those objects inhabit? We introduce a 3,034-sample human-curated benchmark targeting three components of spatial understanding: depth-ordered occlusion (probed via three independent counterfactual operationalisations), optical-geometry inference over visible reflections, and volumetric rearrangement planning. Six frontier and open-weight VLMs, scored by trained annotators on 18,204 responses with no LLM-as-judge, reveal a sharp dissociation: models that plan rearrangements over visible layouts at 53–97% accuracy and rarely violate collision constraints fall to 6–45% on occlusion and below 7% on reflections. An embodied-reasoning model reproduces the same profile. White-box analysis on Qwen3-VL-8B-Thinking localises the failure to the visual-token merger: spatial information recoverable throughout the vision encoder becomes inaccessible after token compression and only stabilises again when clean post-merger activations are patched into the language decoder.

18.
medRxiv (Medicine) 2026-06-18

Expert in Ultrasound Skills: Feasibility of an IMU-video platform to describe technical profiles during focused cardiac ultrasound. Pilot study

Background: Focused cardiac ultrasound (FoCUS) is operator dependent and requires coordinated probe manipulation, image interpretation and iterative visual feedback. Existing assessment approaches often emphasize final image quality or expert rating. We developed Expert in Ultrasound Skills (EXUS) , a platform that synchronizes transducer-mounted inertial measurement unit (IMU) data with ultrasound video, and evaluated its technical feasibility during FoCUS acquisition. Methods: This observational pilot study included 6 operators performing two repetitions of a four-view FoCUS protocol, yielding 12 analytical sessions and 48 planned acquisitions. Feasibility was defined by acquisition completion, video availability, start/stop events, fused IMU-video windows, temporal coverage, complete human label entries and IMU integrity. A 100-image Likert rating task was used to summarize pairwise inter-rater agreement for still-frame image quality assessment. Results: All 48 planned acquisitions were completed with video, start/stop events, fused windows and complete human label entries. Temporal coverage was at least 90% in 47/48 acquisitions. IMU integrity endpoints exceeded the 80% threshold: 43/48 acquisitions had no extreme IMU-derived artifact, 43/48 had no active-segment IMU restart and 44/48 had no complete motion flatline. Mean pairwise exact agreement for the Likert task was 38.9%, with mean quadratic-weighted Cohen's kappa of 0.564. Post hoc profiles varied across duration, visual quality, mechanical load and motor efficiency. Conclusions: EXUS was technically feasible for synchronized IMU-video capture during FoCUS. The pilot supports multimodal acquisition data as a way to describe technical profiles and generate formative feedback hypotheses, but the post hoc indices are not validated competency measures. Keywords: focused cardiac ultrasound; point-of-care ultrasound; inertial measurement unit; medical education; deliberate practice

19.
arXiv (CS.CL) 2026-06-16

Do You Really Need a GPU to Guard Your LLM? CPU-Class Classifiers and Multi-Stage Pipelines for Safety Enforcement at Scale

Safety classifiers that screen LLM inputs for jailbreak attempts have become standard deployment components, yet almost all production systems rely on GPU-based models: fine-tuned transformers and LLM-as-a-judge pipelines. These approaches impose significant per-query latency and infrastructure cost. Very little research has asked whether CPU-based classifiers, such as support vector machines and gradient-boosted trees trained on TF-IDF features, can match their accuracy across the conditions that production deployments encounter. We evaluate five CPU classifier families, Mamba-130M as an SSM-based GPU classifier, and transformer-based GPU models (DeBERTa-v3 and Gemma-2B with LoRA) across nine jailbreak sources and three regimes: in-distribution (D1), out-of-distribution (D2), and adversarially obfuscated (D3). On D1, the best CPU classifier matches the best transformer GPU model at roughly one-fifth the deployment cost. On D2, CPU classifiers fail via confident miscalibration, producing high-confidence false negatives that bypass escalation entirely. On D3, CPU classifiers outperform transformer GPU models by more than 26 percentage points in F1. Based on these complementary failure modes, we design GuardChain, a three-stage safety pipeline (Regex -> CPU -> GPU) that routes each prompt to the cheapest stage capable of a confident decision. The CPU stage alone resolves 80\% of in-distribution prompts at near-peak accuracy, and the GPU stage recovers the out-of-distribution failures. For practitioners deploying LLM safety at scale, this work provides evidence that GPU-class infrastructure is unnecessary for the majority of traffic.

20.
arXiv (CS.CV) 2026-06-11

Task-Aware Structured Memory for Dynamic Multi-modal In-Context Learning

Multi-modal large language models (MLLMs) depend on in-context learning (ICL) for rapid task adaptation, but their scalability is severely limited by finite context windows and the growing cost of key-value (KV) caches in long multi-modal sequences. Existing memory compression approaches typically rely on rigid token removal or sample-dependent importance estimation, which introduces bias, disrupts semantic structure, particularly for visual representations, and yields static memories that cannot adapt to new queries. We introduce TASM (Task-Aware Structured Memory), a training-free framework that addresses these limitations through task-aware, structure-preserving, and dynamically accessible memory construction. TASM employs task-vector guided compression to replace sample-specific signals with a task-level direction that captures shared relevance across demonstrations. To preserve the underlying manifold, it applies semantics-aware token merging via bipartite graph matching, aggregating tokens without destructive pruning. Finally, TASM structures memory into a hierarchy comprising a compact Core Memory and a Latent Bank, facilitating query-adaptive dynamic retrieval. Evaluations confirm TASM maintains high performance under heavy compression, effectively balancing efficiency with adaptability.

21.
arXiv (CS.AI) 2026-06-19

RACL: Reasoning-Agent Control Layers for Continuous Metaheuristic Learning

arXiv:2606.20142v1 Announce Type: new Abstract: This paper introduces RACL, a Reasoning-Agent Control Layer for metaheuristics. RACL places a reasoning agent above an existing optimizer. The agent does not replace the optimizer and does not modify business constraints. Instead, it controls the optimizer's internal search behavior by observing operational memory, reasoning over past behavior, formulating bounded hypotheses, testing interventions, evaluating outcomes, applying guardrails, consolidating useful policies and explaining its decisions. The experiment uses vehicle routing as a testbed, but the contribution is not a new routing solver, a particular ALNS configuration or a specific set of routing rules. The contribution is the RACL method: a way for a reasoning agent to discover, validate, consolidate and explain algorithmic control rules for a metaheuristic. In the current experimental setting, RACL improves or ties the Operational Memory Policy in 21 of 21 feasible cases and improves or ties a non-reasoning Stagnation-Triggered Policy in 18 of 21 feasible cases, with an average RACL vs STP cost delta of -0.641%. In the Sevilla-9/10 runtime sample, RACL improves average cost by -8.337% versus Fixed and -1.605% versus STP without showing material computational overhead. During the proof-of-concept, Codex was used as an in-the-loop reasoning agent observing executions, interpreting logs and proposing live bounded interventions. The policy proxy was later used only to make quantitative evaluation reproducible.

22.
arXiv (CS.LG) 2026-06-16

A Conservation Law for Equilibrium Propagation and Coupled Learning

arXiv:2606.15444v1 Announce Type: cross Abstract: In this paper we show that the physical learning methods known as coupled learning (CL) and equilibrium propagation (EP) conserve a mass-like quantity in the trainable parameters in the continuous-time, small-nudging limit. We prove that this conservation holds in a broad range of physically relevant settings. We then show that the conservation law constrains the training dynamics in a way that makes convergence reliable in important settings for linear circuits. We conclude by discussing some practical implications of this conservation law.

23.
arXiv (CS.AI) 2026-06-16

MA-SBI: Misspecification-Aware Simulation-Based Inference via Side-Channel Guidance

arXiv:2606.16923v1 Announce Type: new Abstract: Simulation-based inference (SBI) of latent parameters is often hindered by simulator misspecification, the mismatch between simulated and real-world observations caused by inherent modeling simplifications. RoPE, the recent state-of-the-art for robust SBI, addresses this through optimal transport between learned representations of real and simulated observations, but requires ground-truth parameter calibration pairs that are typically unavailable in the very settings where SBI is needed. What practitioners do have is unstructured side-information such as regime labels, instruction text, and policy bulletins. We propose Misspecification-Aware Simulation-Based Inference (MA-SBI), a calibration-free framework that turns this side-channel into a posterior correction. A learned corrector maps side-channel text to an observation-space shift applied before any pre-trained amortized posterior, requiring no retraining and no parameter ground-truth. Our main theorem bounds achievable bias reduction by the mutual information between misspecification and side-channel, with a non-vacuous constant that extends to all sub-Gaussian noise via Donsker-Varadhan. On hide-the-calibration benchmarks, MA-SBI with text alone matches the oracle posterior across 10 seeds and two backbones (TOST equivalence), while RoPE given more data does not. The two approaches are complementary: where misspecification is structural and recoverable from parameter pairs, RoPE dominates, as the theory predicts. A stochastic variant improves posterior-predictive log-likelihood on real COVID and OxCGRT epidemiological data, and correctly leaves the posterior unchanged on a well-specified cognitive-science corpus.

24.
arXiv (CS.CV) 2026-06-16

CT-VDETR: Semi-supervised 3D Trauma Detection in Computed Tomography (CT) scans using Dense Vertex Relative Position Encoding

Accurate detection and localization of traumatic injuries in abdominal CT remain challenging because voxel-level annotations are limited and expensive to obtain. We present a label-efficient framework for 3D abdominal trauma detection that combines self-supervised pretraining with semi-supervised transformer-based detection. First, we use Masked Image Modeling (MIM) on 1098 CT volumes to pretrain a 3D U-Net encoder for anatomical representation learning. Next, we adapt V-DETR to dense volumetric CT through a feature adapter that converts the encoder feature grid into a compact token sequence for transformer decoding. The pretrained encoder is then integrated with V-DETR and 3D Vertex Relative Position Encoding (3D V-RPE) to improve the localization of irregularly shaped injuries. Finally, semi-supervised teacher-student consistency regularization leverages 2,000 additional unlabeled volumes during detector training. To the best of our knowledge, this is the first application of a 3D DETR-style detector to the RSNA abdominal trauma detection task. On this benchmark, the proposed method achieves 31.33% test mAP@0.50 using only 78 labeled training volumes, corresponding to a 1.53x improvement over supervised-only training. These results show that combining medical-domain pretraining with semi-supervised learning is an effective strategy for label-scarce 3D medical detection.

25.
medRxiv (Medicine) 2026-06-12

Does the method matter? Evaluating the effectiveness, efficiency and ease of hearing-aid gain self-adjustment

In conventional hearing-aid personalisation, clinicians cannot hear what their patients hear, and patients cannot often reliably detect or describe what they hear. Self-adjustment avoids this issue but requires user controls that adjust hearing-aid signal processing parameters to be effective, efficient and easy. In this study, we explored (a) the roles of interface complexity and stimulus type in the self-adjustment of hearing-aid gain, and (b) how well individuals can adjust one sound to match another to assess the same interfaces and stimuli. Adult hearing-aid users with mild to moderate symmetrical sensorineural hearing loss repeatedly adjusted the gain (a) to their preference from individual prescription (n = 41) and (b) to match their previous preferences from a random starting point (n = 32) using three interfaces representing different bass/mid/treble configurations and three stimuli (music, speech and speech-in-noise). The large interindividual variability in self-adjusted gains clustered into three patterns of deviation from initial prescription: increased relative bass, overall gain reduction, and close to initial prescription. There were no substantial effects of interface nor stimulus on self-adjustment reliability (median {sigma} = 2.8 dB), whereas absolute sound-matching error increased with increasing interface complexity and centre frequency. Neither individual matching accuracy nor questionnaire responses predicted either self-adjusted gains or reliability. Overall, these results show that many - but not all - hearing-aid users can adjust gains with reasonable reliability, and while it can be difficult to predict the behaviour from the individual, the individual applies a similar self-adjustment behaviour across different interfaces and stimuli.