Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-17

MaineCoon: Pursuing A Real-Time Audio-Visual Social World Model

As an increasing majority of global video content is consumed on social platforms for interactive social purposes, video generation models built for social worlds are important but largely overlooked by previous studies. In this work, we define the position of social world models and build a prototype model as the first step towards this goal. While previous world models successfully simulate physical environments or gaming world exploration, they remain fundamentally detached from human-centric social dynamics. To bridge this gap as the first step to social world models, we present MaineCoon, the first real-time audio-visual autoregressive model that has 22B parameters and is capable of real-time streaming generation and sub-second interaction, with a record-breaking frame rate of up to 47.5 FPS, on a single GPU. To the best of our knowledge, MaineCoon is also the first real-time audio-visual generation model specifically optimized for social-interactive applications. To enable efficient and stable training, we introduce several novel techniques into MaineCoon, including self-resampling, cross-modal representation alignment, domain-aware preference optimization, and reinforced online-policy distillation (ROPD). We also design the first agentic streaming inference framework that supports thousand-second-scale or even longer generation while mitigating drift with agentic cache management and prompt planing. These innovations significantly accelerate training while optimizing real-time inference performance. We believe this work not only sets a new state-of-the-art (SOTA) performance benchmark for high-quality, low-latency, and long-horizon audio-visual autoregressive models, but also points out the paradigm shift desired for next-generation AI-native social platforms.

02.
medRxiv (Medicine) 2026-06-17

Cost-effectiveness of measles rapid diagnostic tests for replacing or expanding laboratory testing in Ethiopia

Background: In low- and middle-income countries, laboratory testing to rapidly detect measles outbreaks is limited by infrastructure availability and high costs. This study estimates the potential impact and cost-effectiveness of measles rapid diagnostic tests (RDTs) if implemented nationally in Ethiopia to either replace or expand current testing. Methods: An agent-based model to simulate measles outbreaks was calibrated to Ethiopian measles surveillance data. Modelled outbreak outcomes were aggregated over a 10-year period. Scenarios included using RDTs to (1) replace laboratory testing; (2) replace epidemiological linkage; and (3) increase case detection, in addition to replacing laboratory testing and epidemiological linkage. Testing and outbreak response costs (in 2025 US$) were obtained from Ethiopian Public Health Institute from a government perspective. Total costs and disability-adjusted life years (DALYs) for each scenario were compared to baseline. Results: All scenarios were cost saving compared to baseline. Replacing laboratory testing with RDTs saved US$4.2M (3.2M-4.9M) over 10-years, but due to very low testing rates the benefits of eliminating laboratory testing delays were offset by missed cases from the lower RDT sensitivity, leading to similar outbreak detection times and DALYs. Replacing epidemiological linkage with RDTs had similar DALYs but increased the cost savings to US$9.7M. Using RDTs to double case detection reduced outbreak detection time from 113 to 80 days, averted 17,000 DALYs, and saved US$4.3M. Conclusions: In Ethiopia, use of measles RDTs could be cost saving, and if used to expand testing could prevent measles infections through faster outbreak detection and response.

03.
arXiv (CS.CL) 2026-06-19

NRITYAM: Language Models Meet Art and Heritage of Dance

Language models have become essential tools in shaping modern workflows. However, their global effectiveness hinges on a nuanced understanding of local socio-cultural contexts. To address this gap, we present NRITYAM, a comprehensive benchmark for evaluating the cultural comprehension capabilities of language models in the context of global dance traditions. NRITYAM comprises 9,260 carefully curated question-answer pairs spanning 12 languages, making it the largest dataset dedicated to evaluating cultural knowledge in dance. The dataset has been developed from the ground up through close collaboration with native dance artists and native speakers of the languages, who authored and validated culturally relevant questions specific to their regions. We evaluate a broad set of models, including large language models, small language models, multimodal large language models, and small multimodal language models. As a multilingual and multicultural benchmark, NRITYAM sets a new standard for evaluating the ability of AI systems to understand and reason about traditional performing arts. Detailed dataset samples are available at~\url{https://github.com/niladrighosh03/NRITYAM}.

04.
medRxiv (Medicine) 2026-06-16

The biological clock of multimorbidity: temporal dynamics of disease co-occurrence in primary care

Multimorbidity is the dominant clinical reality of primary care, yet the temporal dynamics governing when and how persistent comorbidity associations emerge remain poorly characterised. Most large-scale comorbidity studies adopt a single observation window after an index diagnosis, implicitly assuming that associations detectable at one year are equally detectable at five. Using 11 years of electronic health records from 5,821,197 individuals in Catalan primary care, we applied a matched cohort design across nine complementary follow-up windows, five cumulative (0-1 to 0-5 years) and four conditional (1-2 to 4-5 years), to 1,315 index diseases, identifying 144,030 significant directed comorbidity associations in the five-year network. We found that 60.1% of these associations required at least three years of follow-up and were undetectable in shorter-window analyses, demonstrating that observation window length is a primary determinant of which comorbidities can be observed. To organise this temporal heterogeneity, we introduce the biological clock of multimorbidity: a two-dimensional framework that positions ICD-10 disease categories according to their rates of cumulative signal attenuation and the persistence of conditional risk. This framework identifies four reproducible temporal patterns (episodic, chronic stable, chronic progressive, and transient-persistent) that are robust under bootstrap resampling, leave-one-disease-out sensitivity analysis, and alternative clustering approaches. The biological clock is systematically modulated by sex, with Blood/Immune and Musculoskeletal disorders showing the largest sex differences in temporal dynamics. Network analysis identified 19 disease "initiators" that generate broad downstream comorbidity burdens and 21 "sinks" representing convergent endpoints of multiple disease trajectories. Comparison with hospital-based Danish data from 6,909,676 individuals showed that shared associations were 2.7-fold enriched over chance expectation (hypergeometric test, p

05.
arXiv (CS.AI) 2026-06-18

A Reproducible Log-Driven AutoML Framework for Interpretable Pipeline Optimization in Healthcare Risk Prediction

arXiv:2605.21528v2 Announce Type: replace-cross Abstract: Accurate disease risk prediction is challenged by heterogeneous features, limited data, and class imbalance. This study presents yvsoucom-iterkit, a deterministic AutoML framework that models pipeline optimization as a configuration-level system with full reproducibility and traceable execution logs, enabling systematic analysis of component attribution, interactions, similarity, and cross-seed robustness. Experiments on the Pima Indians Diabetes and Stroke datasets across more than 18,000 pipeline configurations reveal a structured yet partially redundant search space, where performance is dominated by a small subset of interacting components. Ensemble models achieve stable performance, reaching a Weighted-F1 of 0.89 on Pima and 0.94 on Stroke. Macro-F1 reaches approximately 0.88 on Pima but drops to 0.6560 on Stroke due to severe imbalance. Cross-seed experiments show that ensembles reduce variance compared to single models. Friedman testing ($p < 0.05$) confirms significant ranking differences across configurations. Based on analysis of component attribution, interaction, and similarity, optimal configuration design reveals dataset-dependent behavior. For the Pima dataset, computational efficiency benefits from simplified search spaces where redundant components can be removed, with split ratio playing a key role. In contrast, the Stroke dataset requires enhanced imbalance-aware strategies, where RandomOverSampler improves Macro-F1 from 0.6560 to 0.6766. These findings demonstrate that effective AutoML optimization is achieved through optimal configuration design, where carefully constraining the search space to high-impact components can improve performance, stability, and interpretability while reducing unnecessary search complexity.

06.
arXiv (CS.AI) 2026-06-11

Human-Guided Agentic AI for Multimodal Clinical Prediction: Lessons from the AgentDS Healthcare Benchmark

arXiv:2602.19502v2 Announce Type: replace Abstract: Agentic AI systems are increasingly capable of autonomous data science workflows, yet clinical prediction tasks demand domain expertise that purely automated approaches struggle to provide. We investigate how human guidance of agentic AI can improve multimodal clinical prediction, presenting our approach to all three AgentDS Healthcare benchmark challenges: 30-day hospital readmission prediction (Macro-F1 = 0.8986), emergency department cost forecasting (MAE = $465.13), and discharge readiness assessment (Macro-F1 = 0.7939). Across these tasks, human analysts directed the agentic workflow at key decision points, multimodal feature engineering from clinical notes, scanned PDF billing receipts, and time-series vital signs; task-appropriate model selection; and clinically informed validation strategies. Our approach ranked 5th overall in the healthcare domain, with a 3rd-place finish on the discharge readiness task. Ablation studies reveal that human-guided decisions compounded to a cumulative gain of +0.065 F1 over automated baselines, with multimodal feature extraction contributing the largest single improvement (+0.041 F1). We distill three generalizable lessons: (1) domain-informed feature engineering at each pipeline stage yields compounding gains that outperform extensive automated search; (2) multimodal data integration requires task-specific human judgment that no single extraction strategy generalizes across clinical text, PDFs, and time-series; and (3) deliberate ensemble diversity with clinically motivated model configurations outperforms random hyperparameter search. These findings offer practical guidance for teams deploying agentic AI in healthcare settings where interpretability, reproducibility, and clinical validity are essential.

07.
arXiv (CS.CV) 2026-06-18

Spiking Pyramid Wavelet Transformation for High-efficient and Low-energy Image Restoration

Spiking neural networks (SNNs) have garnered significant interest in computer vision due to their potential for efficiency and biological inspiration. While spiking CNN-based methods have shown promise for image restoration (IR) tasks, their performance is constrained by the inherent receptive field limitations of CNN operations. In the paper, we explore the benefits of discrete wavelet transformation and propose a spiking pyramid wavelet-based model (SPWM) for high-efficient and low-energy target. Specifically, we develop a spiking dual pyramid wavelet (SDPW) block to model long-range dependency and exploit the properties of the degradation in the wavelet domain. Experimental results on several benchmarks demonstrate that SPWM significantly lowers computational costs and energy consumption while maintaining image quality. Our method showcases the potential of SNNs in the field of IR, offering new insights for future applications of resource-limited devices.

08.
arXiv (CS.CL) 2026-06-12

Detecting Functional Memorization in Code Language Models

Large language models (LLMs) are increasingly used to generate code at scale. Meanwhile, prior work has investigated whether training data may be recoverable from model outputs, by auditing the textual overlap between training examples and model generations. Code, however, can be functionally equivalent while textually dissimilar. In this work, we study functional memorization: extraction of functional logic beyond what verbatim metrics detect. We construct a counterfactual setup for Olmo-3-32B, comparing a midtrained model (exposed to target code) against a pretrained reference (not exposed). We prompt both models with Python function signatures and measure both textual and functional similarity (i.e., LLM-as-a-judge, execution-based). Our results show clear evidence of functional memorization, highlighting the need for auditing metrics that go beyond textual overlap.

09.
arXiv (math.PR) 2026-06-12

Counterintuitive problems in discrete probability

arXiv:2606.07516v2 Announce Type: replace Abstract: This manuscript contains a collection of counterintuitive problems in discrete probability, together with detailed solutions. The dataset was constructed as part of a broader research project investigating the capabilities of the latest-generation Large Language Models (LLMs) in solving discrete probability problems, in order to assess whether LLMs tend to make systematic reasoning errors associated with known cognitive biases. The problems collected here are specifically designed to challenge heuristic reasoning strategies that often lead to intuitively appealing but mathematically incorrect conclusions. The dataset combines several types of problems. Some are adapted from classical probabilistic paradoxes and cognitive-bias literature, while others originate from recreational mathematics sources or were developed by ourselves following similar principles. The primary purpose of this document is to provide a transparent and publicly accessible reference for the problems used in our experimental evaluation of language models, as well as providing detailed human-made solutions. At the same time, we believe that this collection may also prove useful for future research on probabilistic reasoning, cognitive biases, and the evaluation of reasoning capabilities in artificial intelligence systems.

10.
arXiv (CS.CV) 2026-06-15

Scratched Lenses, Shifted Depth: Passive Camera-Side Optical Attacks

Physical adversarial attacks on vision systems are typically studied through scene manipulation, such as adversarial patches or projections, where the adversary controls what the camera observes. Camera-side attacks using stickers or auxiliary optics have also been explored, but they treat attacks as image-space perturbations from designed patterns. This misses how physical imperfections interact with scene-dependent lighting and optics. We identify a threat: passive lens-side damage that is persistent yet trigger-conditioned, producing optical artifacts that bias geometric inference under particular visual conditions. We instantiate this threat through Scratch-induced Lens Adversarial Streak Hijacking SLASH, a physical-world attack caused by small scratches on a camera lens or protective cover. Scratches interact with bright light sources and specular reflections to create structured streak artifacts that distort depth cues. Since the perturbation is fixed in the optical path but triggered by the scene, it is both persistent and selective. We formulate the attack in optical space, model the scratch pattern as a trigger-conditioned optical channel, and optimize one fixed configuration across diverse viewing conditions. We evaluate SLASH on monocular depth estimation and monocular 3D object detection in digital and real-world settings. Under the fixed-scratch constraint, directional depth shifts reach up to 32% relative error for monocular depth estimation, with consistent effects on monocular 3D object detection. Physical experiments confirm transfer to real camera recordings, inducing depth shifts above the model's natural prediction baseline. These findings reveal an attack surface where benign-looking hardware imperfections act as latent, scene-triggered adversarial mechanisms, challenging assumptions about physical robustness and motivating defenses for secure vision systems.

11.
arXiv (CS.CV) 2026-06-18

Spatially Stratified Distillation for Heterogeneous Radar Place Recognition

Scalable, all-weather place recognition increasingly relies on heterogeneous radar place recognition to bridge diverse hardware platforms. A notable application is matching queries from cost-effective 4D automotive radars against high-fidelity reference maps built by dense spinning radars. This process is fundamentally limited by the extreme sparsity (and narrow field-of-view) of the 4D sensor, which captures only a fraction of the structural density present in the spinning radar database. Prior efforts address this issue by unifying different radar signals. That is, projecting both signals into a common representational space. Yet, they suffer performance degradation in multi-session environments. In this paper, we propose spatially-stratified distillation (SSD); a strategy that replaces standard uniform distillation with an asymmetric spatial alignment derived directly from physical radar returns. In regions where both radars exhibit overlapping returns, SSD enforces strong feature alignment. Crucially, in sparse regions where the 4D student lacks returns but the teacher contains valid structure within the shared field of view, SSD applies heavily discounted distillation weights. Extensive evaluations of the recent HeRCULES dataset demonstrate that SSD significantly outperforms prior place recognition methods, achieving state-of-the-art results on its challenging dynamic sequences.

12.
arXiv (CS.LG) 2026-06-11

Online Shift Detection and Conformal Adaptation for Deployed Safety Classifiers

arXiv:2606.11949v1 Announce Type: new Abstract: We present an online monitoring system for distributional shift in deployed safety classifiers, using calibrated sequential statistics to detect when a classifier has moved out of distribution. Upon detection, a conformal abstention layer adapts decision thresholds to recover a target error rate epsilon=0.1. In a pre-registered factorial evaluation (4 classifiers x 5 shift conditions x 20 seeds x 2 window sizes, 800 cells), the system achieves 86.6% valid detection (693/800, 95% CI [84.1%, 88.8%]) with mean latency of 39.5 steps. Detection holds across three ground-truth regimes: synthetic onset (86.6%), real temporal jailbreaks (85%, 17/20), and GCG adversarial attacks. Weighted conformal prediction recovers up to 39 pp of lost coverage for DeBERTa (ESS=46/300) but collapses for all other classifiers (ESS~300): logistic density ratio estimation achieves perfect source/target separability in high-dimensional embedding spaces, clipping all importance weights to the floor. DeBERTa shows a gradient from effective correction (paraphrase, ESS=46) to near-total collapse (adversarial suffix, ESS=206). PCA to 32 dimensions breaks the collapse, recovering 33 pp for Llama Guard and 21 pp for ShieldGemma. Variance decomposition reveals classifier (eta^2=0.243), shift type (eta^2=0.237), and their interaction (eta^2=0.185) all contribute substantially to detection latency variance (all p

13.
arXiv (CS.AI) 2026-06-12

When Smaller Wins: Dual-Stage Distillation and Pareto-Guided Compression of Liquid Neural Networks for Edge Battery Prognostics

arXiv:2601.06227v3 Announce Type: replace-cross Abstract: Battery management systems increasingly require accurate battery health prognostics under strict on-device constraints. This paper presents DLNet, a practical framework with dual-stage distillation of liquid neural networks that turns a high-capacity model into compact and edge-deployable models for battery health prediction. DLNet first applies Euler discretization to reformulate liquid dynamics for embedded compatibility. It then performs dual-stage knowledge distillation to transfer the teacher model's temporal behavior and recover it after further compression. Pareto-guided selection under joint error-cost objectives retains student models that balance accuracy and efficiency. We evaluate DLNet on a widely used dataset and validate real-device feasibility on an Arduino Nano 33 BLE Sense using int8 deployment. The final deployed student achieves a low error of 0.0066 when predicting battery health over the next 100 cycles, which is 15.4% lower than the teacher model. It reduces the model size from 616 kB to 94 kB with 84.7% reduction and takes 21 ms per inference on the device. These results support a practical smaller wins observation that a small model can match or exceed a large teacher for edge-based prognostics with proper supervision and selection. Beyond batteries, the DLNet framework can extend to other industrial analytics tasks with strict hardware constraints.

14.
arXiv (CS.AI) 2026-06-16

Mojo: A Promising Tool for Scalable Financial AI Efficiency

作者:

arXiv:2606.16059v1 Announce Type: cross Abstract: For thirty years, quantitative finance has paid a costly two-language tax: models researched in Python are rewritten in C++ for production, often introducing numerical discrepancies. GPU-accelerated deep learning exacerbates this problem, as nondeterministic floating-point reductions can produce drift in long backtests, challenging regulatory reproducibility and auditability expectations. This article surveys Mojo, Modular's 2026 Python-like systems language, as a structural response for capital markets engineering. While closing the Python-to-C++ performance gap, Mojo uniquely combines native interoperability with the low-level systems control required to construct bit-exact deterministic kernels. Its MLIR compilation infrastructure further allows a single codebase to target scalar, SIMD, multicore, and GPU execution, reducing the translation bottleneck between research and production. We benchmark four core financial AI workloads: Monte Carlo option pricing, LLM sentiment inference, multi-asset backtesting, and portfolio Value at Risk. On Apple Silicon, Mojo demonstrates 20x to 180x speedups over pure Python on directly measured kernels; larger-scale GPU workload results are projections calibrated from published benchmarks. Alongside transparent performance data, we introduce mojo-deterministic, an open-source library of reproducible reduction kernels, and provide a candid assessment of the problems Mojo does and does not yet solve.

15.
arXiv (CS.CV) 2026-06-11

From 2D Grids to 1D Tokens: Reforming Shared Representations for Multimodal Image Fusion

Multimodal image fusion aims to integrate complementary information from different modalities into a fused image that preserves rich local details while maintaining globally consistent appearance. Existing approaches build shared representations on 2D feature grids, which excel at modeling local structures but offer limited leverage over image-level global appearance factors. To balance these objectives, we introduce a compact 1D token interface based on a frozen pretrained image tokenizer for modeling non-local appearance/base factors. Rather than using the tokenizer as a reconstruction backbone, our design uses the 1D token space as a global carrier while retaining the 2D spatial pathway for local structure restoration. Specifically, we introduce Selective Token Editing (STE), which sparsely updates/replaces a small set of critical tokens, providing a lightweight mechanism to steer global appearance coherence while keeping the fusion backbone unchanged and avoiding extra losses. Experiments on four commonly used benchmarks show that our method achieves the best overall performance, with consistent, multi-metric improvements in both global coherence and local fidelity. Project page: https://zju-xyc.github.io/1D-Fusion-Project-Page/

16.
arXiv (CS.CV) 2026-06-17

A geometric and deep learning reproducible pipeline for monitoring floating anthropogenic debris in urban rivers using in situ cameras

The proliferation of floating anthropogenic debris in rivers has emerged as a pressing environmental concern, exerting a detrimental influence on biodiversity, water quality, and human activities such as navigation and recreation. The present study proposes a novel methodological framework for the monitoring the aforementioned waste, utilising fixed, in-situ cameras. This study provides two key contributions: (i) the continuous quantification and monitoring of floating debris using deep learning and (ii) the identification of the most suitable deep learning model in terms of accuracy and inference speed under complex environmental conditions. These models are tested in a range of environmental conditions and learning configurations, including experiments on biases related to data leakage. Furthermore, a geometric model is implemented to estimate the actual size of detected objects from a 2D image. This model takes advantage of both intrinsic and extrinsic characteristics of the camera. The findings of this study underscore the significance of the dataset constitution protocol, particularly with respect to the integration of negative images and the consideration of temporal leakage. In conclusion, the feasibility of metric object estimation using projective geometry coupled with regression corrections is demonstrated. This approach paves the way for the development of robust, low-cost, automated monitoring systems for urban aquatic environments.

17.
arXiv (CS.CV) 2026-06-12

Learning Visually Interpretable Oscillator Networks for Soft Continuum Robots from Video

Learning soft continuum robot (SCR) dynamics from video offers flexibility but existing methods lack interpretability or rely on prior assumptions. Model-based approaches require prior knowledge and manual design. We bridge this gap by introducing: (1) The Attention Broadcast Decoder (ABCD), a plug-and-play module for autoencoder-based latent dynamics learning that generates pixel-accurate attention maps localizing each latent dimension's contribution while filtering static backgrounds, enabling visual interpretability via spatially grounded latents and on-image overlays. (2) Visual Oscillator Networks (VONs), a 2D latent oscillator network coupled to ABCD attention maps for on-image visualization of learned masses, coupling stiffness, and forces, thereby enabling mechanical interpretability. We validate our approach on single- and double-segment SCRs, demonstrating that ABCD-based models significantly improve multi-step prediction accuracy with 5.8x error reduction for Koopman operators and 3.5x for oscillator networks on a two-segment robot. VONs autonomously discover a chain structure of oscillators. This fully data-driven approach yields compact, mechanically interpretable models with potential relevance for future control applications.

18.
arXiv (CS.CL) 2026-06-17

Fine-tuning LLMs for Passive Depression Severity Estimation from AI Mental Health Dialogue

Depression is the leading cause of disability worldwide, and early detection of symptom change is essential for timely intervention. Validated instruments such as the Patient Health Questionnaire-9 (PHQ-9) support symptom monitoring at scale, but real-world completion rates are low, introducing response bias and systematic missingness. Passive approaches that infer severity from routinely generated data could close this gap. We address this by predicting PHQ-9 total scores directly from transcripts of conversations between users and an AI mental health application, requiring only conversation text and no additional clinical data. We fine-tune a Qwen3.5-27B backbone with a regression head, augment 3,111 ground-truth labels with pseudolabels generated by a reasoning model (Claude Opus) and iteratively trained intermediate models, for a combined dataset of 6,283 users. On a held-out test set of 842 users, our best model achieves MAE = 2.6, RMSE = 4.0, Pearson r = 0.80, and AUC = 0.91 at the PHQ-9 >= 10 clinical threshold. We also find AUC > 0.87 at every severity threshold from PHQ-9 >= 3 to PHQ-9 >= 24, demonstrating that the model captures depression severity across the full clinical spectrum. This work opens the door to passive, continuous symptom monitoring in AI mental health platforms, without requiring users to complete self-report measures.

19.
medRxiv (Medicine) 2026-06-10

Human-centred design approaches to health facility design: Evidence from perinatal care settings in Ethiopia and Bangladesh

While significant progress has been made in perinatal outcomes over recent decades in low- and middle-income countries (LMICs), maternal and newborn quality improvement initiatives often fail to account for the spatial conditions in which they are implemented. Health systems are increasingly deploying evidence-based care models into built environments that are not optimally structured to meet the needs of its patient population. As the principal users, patients and health care workers can offer pragmatic insights about improving these structural designs. Our objective was to gather insights from patients, providers, and companions about how the physical design of their health facilities influenced their experience receiving or delivering perinatal care. We conducted a prospective observational study using a human-centred design (HCD) approach to analyse perceptions of the quality of perinatal care across two low resource settings: Ethiopia and Bangladesh. Using engagement and assessment tools, we conducted interviews, focus groups, facility walk-throughs, co-design workshops, and infrastructural assessments with patients, companions, providers, and Ministry of Health representatives. Descriptive statistics and thematic analysis were used to identify key learnings and develop recommendations. Across both countries, participants identified the need for facility layouts that better support privacy, mobility during labour, alternative birth positions, companion involvement, cultural and religious practices, sanitation, and provider visibility. Based on these insights, we developed six recommendations to better align health facility infrastructure with maternal and newborn care delivery needs. Our findings suggest that investments in health facility infrastructure may improve care experiences and help enable respectful, safe, and evidence-based maternal and newborn care. Alongside targeted spatial improvements, government authorities responsible for health facility planning should incorporate participatory design processes to ensure infrastructure reflects the needs of patients, companions, and providers and supports high-quality care delivery.

20.
arXiv (CS.AI) 2026-06-16

Automated ultrasound doppler angle estimation using deep learning

arXiv:2508.04243v2 Announce Type: replace-cross Abstract: Angle estimation is an important step in the Doppler ultrasound clinical workflow to measure blood velocity. It is widely recognized that incorrect angle estimation is a leading cause of error in Doppler-based blood velocity measurements. In this paper, we propose a deep learning-based approach for automated Doppler angle estimation. The approach was developed using 2100 human carotid ultrasound images including image augmentation. Five pre-trained models were used to extract images features, and these features were passed to a custom shallow network for Doppler angle estimation. Independently, measurements were obtained by a human observer reviewing the images for comparison. The mean absolute error (MAE) between the automated and manual angle estimates ranged from 3.9{\deg} to 9.4{\deg} for the models evaluated. Furthermore, the MAE for the best performing model was less than the acceptable clinical Doppler angle error threshold thus avoiding misclassification of normal velocity values as a stenosis. The results demonstrate potential for applying a deep-learning based technique for automated ultrasound Doppler angle estimation. Such a technique could potentially be implemented within the imaging software on commercial ultrasound scanners.

21.
arXiv (quant-ph) 2026-06-19

Nearest-neighbour gates are all you need: High-rate quantum low-density parity-check codes on a planar grid

arXiv:2606.19482v1 Announce Type: new Abstract: High-performance quantum low-density parity-check codes promise substantial reductions in the overhead of fault-tolerant quantum computation, but most constructions require long-range connectivity or qubit shuttling, both of which are difficult to realise in superconducting architectures. Here we introduce a family of quantum low-density parity-check codes that, for the first time, combines planar open-boundary layouts, finite-size advantages over surface codes, and syndrome extraction using only nearest-neighbour gates on a square grid of qubits. The key idea is to generate check-data connectivity dynamically: nearest-neighbour iSWAP walks both define the stabiliser supports and implement their measurement, avoiding the need for a long-range hardware graph. The resulting circuits achieve optimal constant-depth stabiliser measurement, independent of code size, and naturally remove leakage from the system by exchanging the role of check and data qubits at each syndrome extraction round. We find finite-size instances such as a [[323,14,15]] code, whose code-efficiency ratio is nearly an order of magnitude larger than that of rotated surface-code patches. At around 30 circuit qubits per logical qubit, the best directional tile-code layouts reduce the per-logical per-round logical error rate by up to a factor of 1000 relative to rotated surface-code memories. These results show that the advantages of quantum low-density parity-check codes can survive compilation into strictly planar nearest-neighbour circuits, bringing low-overhead fault-tolerant memories closer to near-term hardware.

22.
arXiv (CS.CV) 2026-06-16

Avoiding Exponential Blow-Up in Distributive Lattice Submodular Minimization

作者:

Submodular function minimization has gained a lot of interest in recent years. They are highly applicable in the area of Computer Vision and Machine Learning. Often such applications require to work with submodular functions defined on distributive lattice. Current best way of dealing with it is using a transformation which extrapolates the submodular function for the respective boolean lattice. It makes optimization system too inefficient due to enlargement of the working space. Quantitatively, the expanded space has additional exponential (in set size) number of elements. We propose a generic framework for dealing with distributive lattice which only works within distributive lattice. Our framework allows one to use already established submodular function minimization algorithms for boolean lattice. In our experiment, we show the huge improvement in terms of running time over tranditional methods for handling distributive lattice.

23.
arXiv (CS.CV) 2026-06-15

Fusion of Pervasive RF Data with Spatial Images via Vision Transformers for Enhanced Mapping in Smart Cities

In this paper, we present a deep learning-based approach that integrates the DINOv2 architecture to improve building mapping by combining (possibly erroneous) maps from open-source platforms with pervasive radio frequency (RF) data collected from multiple wireless user equipments and base stations. Unlike prior methods, our approach leverages a vision transformer-based architecture to jointly process both RF and map modalities within a unified framework, effectively capturing spatial dependencies and structural priors for enhanced mapping accuracy. For the evaluation purposes, we employ a synthetic dataset co-produced by Huawei. To address the challenges associated with real-world data imperfections, we introduce controlled noise to its RF data so as to simulate real-world conditions. Additionally, we develop and train a model that leverages only aggregated path loss information to tackle the mapping problem. We measure the results according to three performance metrics: the Jaccard index (intersection over union, IoU), the Hausdorff distance, and the Chamfer distance. Our design achieves a macro IoU of 65.3%, significantly surpassing (i) the erroneous maps baseline, which yields 40.1%, (ii) an RF-only method from the literature, which yields 37.3%, and (iii) a non-AI fusion baseline that we designed which yields 42.2%. The comparative evaluation highlights the limitations of relying solely on RF data or on spatial data, as well as the effectiveness that AI can have on fusing data towards enhancing smart city mapping accuracy. We further validate our method on real-world data from the Oslo region, complementing the synthetic evaluation with a real deployment setting, where our best fusion model reaches 64.9% macro IoU. We additionally outline a strategy for deploying the model over larger areas by tiling the region with overlapping windows.

24.
arXiv (CS.AI) 2026-06-16

FlowMPC: Improving Flow Matching policies with World Models

arXiv:2606.16286v1 Announce Type: cross Abstract: Flow Matching (FM) is a powerful approach for behavior cloning in multimodal action spaces [Jiang et al., 2025], but because it is not trained to directly maximize expected return, there is still room to improve how FM policies act at test time. This work investigates whether a learned world model can improve FM policies by enabling Model Predictive Path Integral (MPPI) planning over candidate action sequences proposed by the policy. Building on TD-MPC2 [Hansen et al., 2024], I introduce FlowMPC, a framework that combines an imitation-learned FM policy with a learned world model for test-time planning in ManiSkill manipulation tasks [Tao et al., 2025]. Across PickCube and PickSingleYCB, adding the world model improved performance over the FM policy alone, with especially clear gains in end-of-episode success. These results suggest that world-model-based planning can effectively complement flow-based imitation policies without modifying the FM training objective.

25.
arXiv (quant-ph) 2026-06-17

Robust Spin Splitting and Strain-Controlled Optical Response in Monolayer CrC2N4 for Valleytronic and Optoelectronic Applications

arXiv:2606.17329v1 Announce Type: cross Abstract: Monolayer CrC2N4 recently emerged as a promising two-dimensional semiconductor, yet its spin-orbit-coupled (SOC) physics and strain-tunable optical response remained largely unexplored. Here, we investigated the electronic, valley, charge-transfer, and optical properties of pristine and biaxially strained monolayer CrC2N4 using first-principles calculations. The monolayer exhibited a direct band gap at the K/K' valleys. SOC produced valley contrasting out-of-plane spin polarization, yielding a moderate valence band spin splitting of 51.9 meV and a small conduction band spin splitting of 1.7 meV. Orbital-resolved analysis showed that the edge states were mainly governed by Cr-d and N-p hybridization, while Bader analysis indicated polar-covalent bonding through charge transfer toward N atoms. Biaxial strain in the range of -4% to +4% tuned the band gap from 1.987 to 1.421 eV and drove an indirect-to-direct gap transition near -1% strain. Tensile strain enhanced the Berry curvature and red-shifted the optical response toward the visible-near-infrared region. These results suggested monolayer CrC2N4 as a promising platform for strain-engineered valleytronic and optoelectronic device applications.