Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-16

Fully Quantum Algorithm for the 1-dimensional linear Lattice Boltzmann Method

arXiv:2606.16514v1 Announce Type: new Abstract: A fully quantum algorithm for solving the one-dimensional linear advection-diffusion equation using the Lattice Boltzmann method as a numerical procedure is presented in this work. We start by presenting a state of the art of the current usage of quantum algorithms for solving ordinary and partial differential equations. We then describe two algorithms for the one-dimensional Lattice Boltzmann method with two degrees of freedom. The first one is an existing hybrid quantum-classical algorithm with measurements at each time step, and the second one is our improved version, viz. a fully quantum algorithm where only one measurement is needed at the end of the algorithm. The fully quantum algorithm is first executed on a quantum simulator and then compared with a classical approach. Subsequently, the fully quantum algorithm is run on a quantum system with 133 qubits to investigate the effect of noise and the depth of the circuit on the output state. We find fluctuations in the final result due to the decoherence noise of the qubits.

02.
arXiv (CS.AI) 2026-06-18

A DeepLearning Framework for Dynamic Estimation of Origin-Destination Sequence

arXiv:2307.05623v2 Announce Type: replace-cross Abstract: OD matrix estimation is a critical problem in the transportation domain. The principle method uses the traffic sensor measured information such as traffic counts to estimate the traffic demand represented by the OD matrix. The problem is divided into two categories: static OD matrix estimation and dynamic OD matrices sequence(OD sequence for short) estimation. The above two face the underdetermination problem caused by abundant estimated parameters and insufficient constraint information. In addition, OD sequence estimation also faces the lag challenge: due to different traffic conditions such as congestion, identical vehicle will appear on different road sections during the same observation period, resulting in identical OD demands correspond to different trips. To this end, this paper proposes an integrated method, which uses deep learning methods to infer the structure of OD sequence and uses structural constraints to guide traditional numerical optimization. Our experiments show that the neural network(NN) can effectively infer the structure of the OD sequence and provide practical constraints for numerical optimization to obtain better results. Moreover, the experiments show that provided structural information contains not only constraints on the spatial structure of OD matrices but also provides constraints on the temporal structure of OD sequence, which solve the effect of the lagging problem well.

03.
arXiv (CS.AI) 2026-06-17

Querying an astronomical database using large language models: the ALeRCE text-to-SQL system

arXiv:2606.18108v1 Announce Type: cross Abstract: We develop a text-to-SQL (structured query language) system based on large language models (LLMs) using in-context learning and apply it to the Automatic Learning for the Rapid Classification of Events (ALeRCE) astronomical database. ALeRCE is a community broker for the Zwicky Transient Facility and the Vera C. Rubin Observatory. The system enables users to query the database in natural language (NL) and generates executable SQL queries. To develop and evaluate the system, we constructed a dataset of 110 NL/SQL pairs. We propose a step-by-step generation framework comprising four modules: schema linking, query classification, prompt decomposition, and self-correction. The performance of thirteen LLMs is evaluated using in-context learning and prompt engineering techniques. Text-to-SQL performance is assessed using the perfect-match (PM) rate for row identifiers (e.g., object identifiers) and column identifiers (i.e., column names). The proposed step-by-step framework consistently outperforms a direct-inference baseline, while the self-correction module consistently reduces execution errors. For Claude Opus 4.6, PM performance on row (column) identifiers is high for simple queries, reaching 0.97 (0.94), and decreases with query complexity to 0.44 (0.72) for medium queries and 0.59 (0.49) for hard queries. Among the thirteen evaluated models, the best-performing LLMs for the text-to-SQL task are Claude Opus 4.6, Gemini 2.5 Pro, Gemini 3 Flash, and GPT-5.2-Codex.

04.
arXiv (math.PR) 2026-06-12

Data-driven subsampling rates for diffusion parameter estimation of SDEs

arXiv:2606.13615v1 Announce Type: new Abstract: We study the problem of diffusion parameter estimation for stochastic differential equation (SDE) models in scenarios where data and model are compatible only on specific scales that have yet to be determined. We introduce a simple and efficient method for selecting suitable rates at which given time series data should be subsampled in order to ensure that the statistical structure of the subsampled data is consistent with the behavior of the SDE model on an infinitesimal scale. Our approach is based on analyzing the statistics of the lengths of monotonically increasing or decreasing segments in the subsampled data sequence, which we refer to as monotone runs. As an analytical foundation, we prove for a large class of SDEs with additive noise that the lengths of monotone runs at an infinitesimal scale are approximately geometrically distributed with success probability $1/2$. This universal characterization is employed to derive an automated method for selecting appropriate subsampling rates for given time series data that is directly applicable in real-world scenarios and does not rely on an asymptotic framework of multiscale diffusions. The approach is demonstrated using an application from industrial mathematics concerning surrogate models for fiber lay-down curves in production processes of nonwoven textiles.

05.
arXiv (CS.AI) 2026-06-11

Characterizing Software Aging in GPU-Based LLM Serving Systems

arXiv:2606.11916v1 Announce Type: cross Abstract: This paper proposes an empirical methodology to study software aging in GPU-based LLM serving systems. Traditional aging studies focus on CPU-centric software with relatively regular workloads; LLM serving is different, spanning a Python host and a CUDA device, handling requests whose cost varies by orders of magnitude, and relying on rapidly evolving software stacks. We run a 216-hour campaign across six co-located deployments under identical stress conditions, monitor host, device, and client metrics in parallel, and apply a statistical pipeline that accounts for autocorrelation and multiple testing. Our results reveal statistically significant memory aging in all deployments, with leak rates strongly dependent on the serving runtime and deployment configuration. Beyond these findings, we provide a reproducible framework that opens a research direction at the intersection of the software aging and rejuvenation and LLM serving communities.

06.
arXiv (CS.CV) 2026-06-16

BBR-Net: Boundary-Balanced Replay for Continual Medical Image Segmentation

Continual learning for medical image segmentation remains challenging under domain shift because replay-based methods often preserve appearance information without explicitly modeling anatomical structure. This study investigates whether structural consistency governs knowledge retention in continual cardiac ultrasound segmentation. We propose the Boundary-Balanced Replay Network (BBR-Net), which selects replay samples using boundary-aware priority and class balance to preserve anatomically informative regions. The method is evaluated on CAMUS and CardiacNet under forward (CAMUS to CardiacNet) and reverse (CardiacNet to CAMUS) task orders. In the forward setting, BBR-Net retains source-task performance close to an offline joint-training reference, while markedly reducing catastrophic forgetting and preserving competitive target-task adaptation. Ablation results show that boundary-aware prioritization contributes to retention and improves the balance between source-task preservation and target-task adaptation when combined with class-aware sampling. In contrast, the reverse setting reveals that structure-aware replay fails when initial representations are learned from noisy and structurally inconsistent data. To isolate this effect, we conduct a controlled structural perturbation analysis by progressively corrupting source-task boundaries while keeping the dataset, architecture, and training protocol fixed. Forgetting increases consistently as structural reliability decreases, suggesting that replay effectiveness is strongly influenced by the quality of stored structural information, rather than by memory capacity alone. These findings indicate that preserving anatomical structure under domain shift is a central factor in continual medical image segmentation, and that replay mechanisms should account for structural reliability to support robust knowledge retention.

07.
arXiv (CS.CV) 2026-06-12

HYDRA-X: Native Unified Multimodal Models with Holistic Visual Tokenizers

Holistic visual tokenizers are fundamental to unified multimodal models (UMMs) as they map diverse visual inputs into a unified representation space. In this paper, we present HYDRA-X, the first UMM that unifies image and video tokenization within a single Vision Transformer (ViT). Our design is driven by two core challenges: efficiently injecting spatiotemporal reconstruction capability into a native ViT, and embedding image- and video-level semantic awareness into the latent space. To address the first, comprehensive ablations reveal two key findings: (1) frame-level causal temporal attention suffices for visual reconstruction, whereas full spatiotemporal attention degrades it; and (2) hierarchical temporal compression substantially outperforms single-step alternatives. To tackle the second, we propose a lightweight decompressor that upsamples temporally compressed features under joint image-video teacher supervision, thereby enforcing complementary semantic structures within the compact latent space. Building on this holistic tokenizer, we further propose a principled improvement of the editing pipeline: source-target interaction should occur at the latent level inside the tokenizer rather than at the semantic level inside the LLM, substantially improving editing consistency and accelerating convergence. Instantiated at the 7B dense model, HYDRA-X achieves strong performance across image and video understanding and generation tasks, paving the way for future unified-tokenizer UMMs.

08.
arXiv (CS.CL) 2026-06-16

Robust Dual-Signal Fusion: Hybrid Neuro-Symbolic Gating with Compressed Chain-of-Thought Refinement for Irony Detection in Social Media Texts

Large Language Models (LLMs) natively default to literal semantic interpretations, making zero-shot irony detection a persistent challenge. We introduce the Robust Dual-Signal (RDS) Fusion framework, a hybrid neuro-symbolic architecture that compresses Chain-of-Thought (CoT) reasoning trajectories without Supervised Fine-Tuning (SFT). Evaluated on a strictly held-out TweetEval test set (N=734), RDS achieves 78.1% accuracy and a Macro F1 of 0.777, matching the absolute performance ceiling of the fine-tuned BERTweet. On the heavily imbalanced iSarcasm dataset, the frozen CoT pipeline filters 22.5% of out-of-distribution hallucinations, yielding a zero-shot Macro F1 of 0.6726 and Ironic F1 of 0.4821, outperforming multiple heavily supervised SemEval transformer ensembles. A statistical ablation confirms this structural synergy: adding the symbolic prior to the neural baseline yields no significant gain (p = 0.242), and the marginal benefit of adding the CoT pipeline to that prior is heavily compressed (p = 0.149). Only the complete, concurrent fusion of all three signals achieves a statistically validated improvement over the baseline (p = 0.005).

09.
Nature (Science) 2026-06-08

Daily briefing: Human embryo genomes precisely altered

作者:

The use of ‘base editing’ to precisely tweak human embryos has divided researchers. Plus, the number of lives saved by less-polluting cars in China and how to tip the world towards a sustainable future. The use of ‘base editing’ to precisely tweak human embryos has divided researchers. Plus, the number of lives saved by less-polluting cars in China and how to tip the world towards a sustainable future.

10.
Science (Express) 2026-05-06

A 481-meter-high landslide-tsunami in a cruise ship–frequented Alaska fjord | Science

作者: 未知作者

Early in the morning of 10 August 2025, a >64 × 10 6 m 3 landslide struck Tracy Arm fjord in Alaska. The landslide was preconditioned by glacial retreat caused by climate change. The resulting 481 m runup megatsunami followed an initial 100-m-high breaking wave traveling >70 m s −1 . The landslide was preceded by several days of microseismicity, which increased in rate and magnitude until ~1 hour before failure. The landslide produced globally observed long-period seismic waves equivalent in size to a M5.4 earthquake. A long-period (~66 s) global seismic signal, produced by a landslide-induced seiche trapped within the fjord, persisted for up to 36 hours, the second time a days-long seiche has been thus observed. With fjord regions increasingly visited by cruise ships, and climate change making similar events more likely, this unanticipated, near-miss event highlights the growing risk from landslides and tsunamis in coastal environments.

11.
arXiv (CS.AI) 2026-06-18

DRIFT: Refining Instruction Data via On-Policy Data Attribution

arXiv:2606.18307v1 Announce Type: cross Abstract: Optimizing the training data distribution for Supervised Fine-Tuning (SFT) dictates the capability of Large Language Models (LLMs). While existing data curation methods excel at accelerating training under constrained budgets, they are less suited to elevating the capability upper bound. The challenge here is no longer to identify a smaller subset that preserves performance, but to refine the data distribution toward instances most capable of improving the final model. To address this problem, we explore instance-level data attribution using Influence Functions (IF). We identify that standard IF formulations struggle in this setting due to two structural limitations: a proximity gap caused by off-policy validation targets, and a severe bias towards gradient norm. We propose DRIFT (Data Refinement via On-Policy Influence Functions for Supervised Fine-Tuning). Instead of relying on external reference data, DRIFT utilizes the model's on-policy rollouts as validation targets, which empirically minimizes the parameter proximity gap and better aligns with the local neighborhood assumption of IF. It further applies signed weighting based on trajectory correctness and debiases influence scores against the gradient hacking issue, allowing a small set of validation queries to act as reliable anchors for attributing the full dataset. Experiments on 7B-parameter instruction and reasoning models show that DRIFT consistently raises the performance ceiling on both, outperforming existing data curation baselines.

12.
arXiv (CS.CL) 2026-06-17

When Tables Go Crazy: Evaluating Multimodal Models on French Financial Documents

Vision-language models (VLMs) perform well on many document understanding tasks, yet their reliability in specialized, non-English domains remains underexplored. This gap is especially critical in finance, where documents mix dense regulatory text, numerical tables, and visual charts, and where extraction errors can have real-world consequences. We introduce Scribe Finance, the first multimodal benchmark for evaluating French financial document understanding. The dataset contains 1,204 expert-validated questions spanning text extraction, table comprehension, chart interpretation, and multi-turn conversational reasoning, drawn from real investment prospectuses, KIDs, and PRIIPs. We evaluate six open-weight VLMs (8B-124B parameters) using an LLM-as-judge protocol. While models achieve strong performance on text and table tasks (85-90% accuracy), they struggle with chart interpretation (34-62%). Most notably, multi-turn dialogue reveals a sharp failure mode: early mistakes propagate across turns, driving accuracy down to roughly 50% regardless of model size. These results show that current VLMs are effective for well-defined extraction tasks but remain brittle in interactive, multi-step financial analysis. Scribe Finance offers a challenging benchmark to measure and drive progress in this high-stakes setting.

13.
arXiv (CS.AI) 2026-06-15

Transforming Shape Schemas with Composable Property-Graph Queries (Extended Version)

arXiv:2606.14309v1 Announce Type: cross Abstract: Property graphs may be constrained by schemas that inform both query engines and human users about the shape of valid data, enforcing a contract between data provider and consumer. Composable property-graph queries transform input graphs into output graphs. Then, the question arises of which schema can be expected after one (or several) transformation steps. We investigate how schema constraints can be inferred given an input schema and a transforming query. Specifically, we propose a reasoning procedure that, given an input schema in ProGS and a query in G-CORE infers an output schema. Since graph updates will happen frequently, our inference procedure does not rely on graph instances, such that the computed output schema applies to all graphs originating from any input graph complying with the input schema. Related work has addressed this problem for SPARQL CONSTRUCT queries, encoding it in Description Logics (DLs) so that the output schema is entailed by axioms inferred from input schema and queries. Property graphs and their queries, however, complicate the matter, as property graphs feature label and property annotations as well as first-class edges. Thus, reification has to be used in one way or another, though available DLs lack the means to encode such features directly. We approach this novel challenge via a family of mappings for i) property graphs reified in RDF, aligned with ii) a mapping from ProGS to SHACL and iii) a mapping from G-CORE to SPARQL CONSTRUCT queries. In this manner, schema inference for property graphs becomes manageable, as we break apart the problem through the extra mapping layer and utilize efficient DL reasoners. We develop the metatheory regarding the soundness of inferred schema constraints and the semantic equivalence of mapped schemas and queries.

14.
arXiv (CS.CV) 2026-06-11

Parameter-Efficient Adapter Tuning for Tabular-Image Multimodal Learning

作者:

Tabular-image multimodal learning aims to improve predictive modeling by jointly using structured tabular attributes and visual data. Although pretrained encoders provide strong modality-specific representations, full fine-tuning can be computationally expensive, while keeping encoders frozen may limit task-specific adaptation. We propose the Tabular-Image Adapter (TI-Adapter), a modality-specific adapter-based fine-tuning framework for efficient multimodal adaptation. TI-Adapter freezes the pretrained tabular encoder and learns an adapter after the extracted tabular embedding, while adapting the image branch with embedding-level and bottleneck-level adapters instead of full fine-tuning. Experiments on 20 tabular-image datasets show that TI-Adapter achieves competitive or better predictive performance than full fine-tuning while using substantially fewer trainable parameters. Ablation studies further demonstrate the importance of adapter placement for balancing performance and practical efficiency.

15.
arXiv (CS.LG) 2026-06-19

Integrating national forest inventory, airborne lidar, and satellite imagery for wall-to-wall mapping of forest structure with computer vision

arXiv:2606.20291v1 Announce Type: new Abstract: Remote sensing is increasingly relied upon to deliver actionable science for forest and wildfire risk management across large landscapes. Wall-to-wall, annually updated maps are a persistent need for effective forest management. Many planning systems and data collections combine disparate data sources with different purposes, vintages, and prediction quality, which leads to confounding behavior in operational planning systems. We introduce the VibrantForests framework, developed and applied to map forest attributes and provide a coherent foundation for effective forest and wildfire planning. VibrantForests includes a satellite-based forest structure model trained on lidar-derived samples and applied across the contiguous United States to concurrently generate estimates of canopy cover, canopy height, aboveground live tree biomass, basal area, and quadratic mean diameter at 10-meter resolution. We demonstrate predictive capability spanning the full spectrum of forest conditions ranging from sparse-canopy/low-biomass to dense-canopy/high-biomass. Results show that our model extends the range at which saturation is commonly encountered in comparable passive-sensor models, and reduces regression-to-mean behavior that commonly produces overestimation of forest attributes in small/sparse conditions and underestimation in large/dense conditions. The VibrantForests framework addresses a key limitation in large-area forest and wildfire planning by delivering coherent wall-to-wall estimates of management-relevant attributes at annual cadence and 10m resolution.

16.
arXiv (CS.AI) 2026-06-16

AI Contagion in Social Networks

arXiv:2606.15206v1 Announce Type: cross Abstract: We study how artificial intelligence (AI) interacts with social communication networks to shape the stability of collective knowledge. Agents exchange information through a network while receiving AI-generated content, and AI systems retrain on the aggregate social information they influence. This interaction generates two feedback forces: an AI contagion channel, through which distortions diffuse across the network, and an AI social distortion multiplier, through which retraining amplifies past errors. Despite the high dimensionality of the environment, we show that the long-run behavior of the system admits a two-dimensional representation whose spectral radius determines whether AI-mediated information systems are dynamically stable or unstable. We characterize a sharp regulatory frontier identifying the minimum filtering required for stability and show how network topology shapes systemic informational risk.

17.
arXiv (quant-ph) 2026-06-17

Variational Quantum Eigensolver-Based Quantum Bootstrap Embedding for Molecules

作者:

arXiv:2606.17095v1 Announce Type: cross Abstract: Simulating strongly correlated molecular systems on near-term quantum hardware remains challenging due to modern hardware's limited quantum volume and moderate-fidelity qubits. One potential way to circumvent this challenge is through bootstrap embedding (BE). Bootstrap embedding breaks molecules into smaller fragments that are then embedded into the "bath" of other fragments in an iterative way. Bootstrap embedding is appealing for quantum simulation because fragmenting the system reduces the qubit requirements for any given fragment. In this work, we develop a quantum bootstrap embedding (QBE) workflow that uses variational quantum eigensolver (VQE) fragment solvers and study the algorithmic choices that determine the overall VQE-QBE algorithm's success. To improve efficiency, we introduce FastAdaptVQE, a sparse matrix-accelerated form of the adaptive variational quantum eigensolver (ADAPT-VQE) that replaces symbolic commutator evaluation with direct statevector linear algebra, and MatrixFreeAdaptVQE, a matrix-free extension that removes the sparse-matrix memory bottleneck that appears when treating larger fragments. We also modify the ADAPT-VQE operator selection step by replacing the purely greedy choice with a look-ahead strategy. Benchmarks on $H_4$ and $F_2$ reach chemical accuracy, within 1 kcal/mol of bootstrap embedding results using a full configuration interaction (FCI) solver. These results show that combining QBE with VQE can accurately calculate energies of molecular systems. This research lays the foundation for extending energy calculations to larger molecular systems and quantum materials on near-term quantum hardware.

18.
arXiv (CS.AI) 2026-06-16

TERMS-Bench: Diagnosing LLM Negotiation Agents Beyond Deal Rate

arXiv:2605.13909v2 Announce Type: replace-cross Abstract: Negotiation is a central mechanism of economic exchange, shaping markets, procurement, labor agreements, and resource allocation. It is also a canonical testbed for agentic language models, requiring multi-turn interaction under hidden preferences, strategic communication, and binding constraints. These properties make negotiation hard to evaluate: unlike math or code, it has no intrinsic verifier. Existing LLM negotiation evaluations rely on LLM-vs.-LLM interaction or aggregate outcomes such as deal rate, leaving failures opaque. We introduce Terms-Bench, short for Testbed for Economic Reasoning in Multi-turn Strategy, a Bayesian-game framework that makes the environment itself the verifier by specifying the counterpart's latent type, policy, and payoff structure. We instantiate it in bilateral price negotiation, where the counterpart's private state and simulator policy are hidden from the agent but observable to the evaluator. This turns the counterpart from a black-box opponent into a diagnostic instrument, enabling agent-attributable failure analysis and oracle-reference optimality gaps. Evaluating 13 LLM agents spanning frontier systems from major providers, Terms-Bench turns negotiation evaluation from aggregate ranking into actionable diagnosis: where agents fail, why they fail, and what to strengthen. Empirically, frontier models saturate deal rate yet diverge in surplus extraction, cue use, belief calibration, and compliance, revealing agent-specific bargaining bottlenecks masked by prior benchmarks.

19.
arXiv (CS.LG) 2026-06-18

ActiTect: A Generalizable Machine Learning Pipeline for REM Sleep Behavior Disorder Screening through Standardized Actigraphy

arXiv:2511.05221v3 Announce Type: replace Abstract: Isolated rapid eye movement sleep behavior disorder (iRBD) is a major prodromal marker of $\alpha$-synucleinopathies, often preceding the clinical onset of Parkinson's disease, dementia with Lewy bodies, or multiple system atrophy. While wrist-worn actimeters hold significant potential for detecting RBD in large-scale screening efforts by capturing abnormal nocturnal movements, they become inoperable without a reliable and efficient analysis pipeline. This study presents ActiTect, a fully automated, open-source machine learning tool to identify RBD from actigraphy recordings. To ensure generalizability across heterogeneous acquisition settings, our pipeline includes robust preprocessing and automated sleep-wake detection to harmonize multi-device data and extract physiologically interpretable motion features characterizing activity patterns. Model development was conducted on a cohort of 78 individuals, yielding strong discrimination under nested cross-validation (AUROC = 0.95). Generalization was confirmed on a blinded local test set (n = 31, AUROC = 0.86) and on two independent external cohorts (n = 113, AUROC = 0.84; n = 57, AUROC = 0.94). To assess real-world robustness, leave-one-dataset-out cross-validation across the internal and external cohorts demonstrated consistent performance (AUROC range = 0.84-0.89). A complementary stability analysis showed that key predictive features remained reproducible across datasets, supporting the final pooled multi-center model as a robust pre-trained resource for broader deployment. By being open-source and easy to use, our tool promotes widespread adoption and facilitates independent validation and collaborative improvements, thereby advancing the field toward a unified and generalizable RBD detection model using wearable devices.

20.
arXiv (CS.CV) 2026-06-15

MUSE: Agentic 3D Scene Authoring via Memory-Grounded Incremental Requirement Satisfaction

Text-driven 3D scene generation is a promising technique for digital content creation, embodied AI simulation, and interactive design, yet practical workflows often require refining, extending, or correcting existing scenes while preserving non-target content. Existing methods can produce realistic and structurally plausible scenes, but they generally lack editability with requirement-level state tracking, so part-level failures often lead to full-scene regeneration or manual intervention. To tackle this challenge, we formulate controllable 3D scene authoring as incremental requirement satisfaction, unifying construction and editing. In this paper, we present MUSE, a memory-grounded multi-agent framework in which an Architect compiles instructions into structured requirements, a Sculptor executes local scene operations, and an Inspector verifies each step while updating Working, Scene, and Skill Memory. To evaluate requirement-level controllability and preservation-aware editing, we introduce AuthorBench, offering 145 constrained construction cases and a 1,584-case preservation-aware editing pool paired with external structured checks. On full construction cases, MUSE improves All-Goal success from 37.9 to 80.7 and surface-constraint fulfillment from 35.0 to 92.6 over the strongest baseline. On a stratified 240-case editing test split, MUSE achieves 49.6 All-Goal success, 99.9 preservation rate, and only 0.6 unintended change rate. Beyond automated metrics, human evaluations on compared local-editing baselines support stronger alignment with user intent, and downstream navigation-proxy tests indicate stronger spatial stability. Combined with ablations validating our memory designs, these results establish MUSE as an effective framework for controllable 3D scene authoring.

22.
medRxiv (Medicine) 2026-06-19

Fine-Tuning SAM2 for Coronary Artery Segmentation in X-Ray Fluoroscopy

作者:

SAM2 (Meta, 2024) provides a strong starting point for segmentation, but given the unique challenges in medical imaging (noise from patient movement, the projection-based nature of X-ray fluoroscopy, and low contrast between vessels and background), direct application is difficult. We fine-tune MedSAM2 on annotated coronary angiograms and apply it to video data for point-of-care use. On the ARCADE validation set (200 images), the fine-tuned model achieves Dice 0.767 compared to 0.033 zero-shot. On 10 fluoroscopic video studies from CoronaryDominance, it tracks vessels coherently and avoids falsely segmenting ribs, stents, and bypass grafts in 9 of 10 studies. Code is available at https://github.com/elakiyasivakumar/SAM2-Coronary-Angiography-VA and the fine-tuned checkpoint at https://huggingface.co/Elakiya17/CA-SAM2.

23.
arXiv (CS.CV) 2026-06-12

Skeleton Sparsification and Densification Scale-Spaces

The Hamilton-Jacobi skeleton, also known as the medial axis, is a powerful shape descriptor that represents binary objects in terms of the centres of maximal inscribed discs. Despite its broad applicability, the medial axis suffers from sensitivity to noise: Minor boundary variations can lead to disproportionately large and undesirable expansions of the skeleton. Classical pruning methods mitigate this shortcoming by systematically removing extraneous skeletal branches. This sequential simplification of skeletons resembles the principle of sparsification scale-spaces that embed images into a family of reconstructions from increasingly sparse pixel representations. We combine both worlds by introducing skeletonisation scale-spaces: They leverage sparsification of the medial axis to achieve hierarchical simplification of shapes. Unlike conventional pruning, our framework inherently satisfies key scale-space properties such as hierarchical architecture, controllable simplification, and equivariance to geometric transformations. We provide a rigorous theoretical foundation in both continuous and discrete formulations and extend the concept further with densification. By growing the skeleton successively instead of shrinking it, we allow inverse progression from coarse to fine scales. Densification scale-spaces can even reach beyond the original skeleton to produce overcomplete shape representations with relevancy for practical applications. Through proof-of-concept experiments, we demonstrate the effectiveness of our framework for practical tasks including robust skeletonisation, shape compression, and stiffness enhancement for additive manufacturing.

24.
bioRxiv (Bioinfo) 2026-06-11

DLDN-Bench: A Benchmark Framework for Deep Learning de Novo Peptide Sequencing in Proteomics

De novo peptide sequencing is an essential approach for analyzing mass spectrometry data because it enables the identification of novel peptides without relying on protein sequence databases. Recent advances in deep learning have substantially improved the performance of de novo sequencing methods, but the rapid emergence of new models has led to heterogeneous evaluation practices and limited comparability. To address this, we introduce DLDN-Bench, a benchmark framework including a set of benchmark datasets derived from human muscle biopsy mass spectrometry data retrieved from PRIDE and annotated through consensus across multiple widely used database search engines. Using these datasets, we systematically benchmark recent deep learning-based de novo sequencing tools alongside traditional approaches. Performance is assessed using established metrics, including precision and coverage relative to a pseudo-ground truth defined by cross-engine agreement. To demonstrate the utility of DLDN-Bench, we benchmark four recent deep learning models and make all results publicly available. This benchmark framework provides a standardized basis for comparing state-of-the-art methods and offers an extensible resource for evaluating future tools in de novo peptide sequencing.

25.
arXiv (CS.CV) 2026-06-18

FlowObject: Flow Steering for Bridging Generative Priors and Reconstruction Fidelity

Recovering complete 3D representations of objects from few casual image captures remains a significant challenge. Recent 3D generative models, particularly those based on Flow-Matching (FM), can synthesize high-quality textured assets; however, they often suffer from ''synthetic bias'' where learned priors override observational evidence, alongside a lack of alignment with the observed instance. Conversely, optimization-based methods like 3D Gaussian Splatting (3DGS) provide high fidelity on visible surfaces but fail to reason about unobserved geometry. In this paper, we present FlowObject, a framework that reformulates sparse-view 3D reconstruction as a training-free, guided inverse problem. Our approach applies a dual-space guidance strategy to steer the Ordinary Differential Equation (ODE) trajectory of a flow-matching model, enabling the completion of unseen regions through learned generative priors while enforcing strict consistency with real-world observations. By integrating a 3DGS refinement stage, FlowObject further bridges the gap between ''synthetic-looking'' generative outputs and photorealistic reconstructions. Comprehensive benchmarks on synthetic and real-world datasets demonstrate that current state-of-the-art methods often struggle to achieve geometric completeness and observational consistency simultaneously, especially under severe occlusions. In contrast, our method significantly outperforms state-of-the-art generative models and optimization-based frameworks in both geometric completeness and view-dependent appearance fidelity.