Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-12

A Theory of Training Profit-Optimal LLMs

arXiv:2605.16430v3 Announce Type: replace-cross Abstract: Scaling LLMs requires tremendous computational resources, and recent advances in AI have gone hand in hand with massive amounts of capital expenditure. While it is established that scaling up LLMs reliably increases model quality (quantified in terms of loss or downstream evaluations), it is unclear how these quality improvements translate to potential revenue, and whether revenue increases would offset costs of larger-scale training and inference. In this work, we develop an economic model for characterizing the rational behavior of an LLM training firm by combining scaling laws with microeconomic theory. Under our model of firm behavior, LLM quality can be increased with more parameters and training tokens, leading to more potential adoption by consumers, who each have a quality threshold for using the LLM. On the other hand, additional parameters and training tokens both incur additional costs. We analyze the profit maximization problem for this model under compute-bound and data-bound regimes. In the compute-bound regime, optimal model size and token budget track hardware efficiency $E$ (FLOPs/\$) at a near-linear rate; total training cost then scales sub-quadratically in $E$. Data efficiency improvements incentivize larger models and training expenditure. When we are limited to $D$ data, profit-optimal training expenditure scales as $D^2/E$, i.e, increase with data and decreases with hardware efficiency (as well as data efficiency). Finally, we analyze practical trends in training expenditure: current trends are consistent with our most permissive model variants in the compute-bound regime, but are not profit-optimal in the data-bound regime or assuming hardware advances will stall. Overall, our results provide a theory of profit-optimal LLM training, providing a foundation for engaging critically with industry statements and supporting long-term economic decision making.

02.
arXiv (math.PR) 2026-06-12

Explosion and non-explosion in pure birth Crump–Mode–Jagers branching processes

arXiv:2601.06850v2 Announce Type: replace Abstract: In this short note, we provide an explicit sufficient condition for non-explosion of Crump–Mode–Jagers branching processes with pure birth reproduction. It shows that the standard sufficient condition for explosion, namely the convergence of the series of reciprocals of the birth rates, is – at least for rate sequences without excessive oscillations – remarkably close to being necessary. At the same time, it is not necessary in full generality: we construct a counterexample which also yields a general preferential attachment tree without fitness with an infinite path and no vertices of infinite degree, thereby answering an open question previously raised in the literature.

03.
arXiv (CS.AI) 2026-06-19

Triangular Consistency as a Universal Constraint for Learning Optical Flow

arXiv:2606.19938v1 Announce Type: cross Abstract: We propose triangular consistency as a first-principled constraint for optical flow, which is agnostic to network architecture, supervision type, and dataset, and applies to both image-pair and multi-frame settings. This simple but powerful constraint is to compose two flows to induce a third flow and enforce consistency among the three. The composed flows may arise from (i) image pairs, yielding cycle consistency; (ii) multiple video frames, producing longer-range motion through temporal chaining; or (iii) image pairs combined with controlled synthetic transformations, which becomes data augmentation. This triangular consistency introduces negligible computational overhead and requires no additional annotations. Since it is derived directly from the geometry of optical flow, it does not rely on model-specific assumptions and serves as a ``universal'' plug-and-play component for optical flow training. Experiments show consistent improvement across supervised, unsupervised, and transfer learning settings.

04.
bioRxiv (Bioinfo) 2026-06-20

SAbDab2: The structural antibody database in the age of machine learning

The Structural Antibody Database (SAbDab) is a publicly available repository of experimentally determined antibody structures, first released in 2013. Explicit support for single-domain antibodies was added in 2021, with SAbDab-nano. Recently, increasing interest in antibodies has led to a proliferation of novel antibody formats, while simultaneous advances in machine learning have increased demand for standardised, high-quality structure data. Here, we present SAbDab2, re-engineered for the machine-learning age. It introduces support for a variety of new formats, and makes it easy to retrieve and compare all known structures of a given antibody. In addition, SAbDab2 provides ready access to ML-grade structures of antibody and antibody–antigen-complexes, with standardised, versioned train/test splits. These will be updated every six months going forward, and are available at https://zenodo.org/records/20083995. SAbDab2 itself is updated weekly and is freely available at https://sabdab2.opig.stats.ox.ac.uk.

05.
arXiv (CS.CV) 2026-06-16

Temporal Difference Learning for Diffusion Models

Diffusion models are typically trained with objectives that focus on local denoising targets at individual time steps (or adjacent pairs), which do not enforce consistency between predictions along the denoising trajectory. This lack of cross-time consistency can degrade performance, especially for few-step samplers. We introduce a temporal difference (TD) objective that penalizes inconsistency of the model's multi-step progress along the denoising path. By reformulating the diffusion process as a Markov reward process and casting denoising as a policy evaluation problem in reinforcement learning, we derive a unified TD approach that applies to both discrete- and continuous-time diffusion formulations. We further propose a principled sample-based reweighting method that stabilizes training. Empirically, we show that using our TD training can significantly improve sample quality measured by FID, with stronger advantages when the number of sampling steps is small, highlighting its practical utility under low-computation-budget scenarios. We provide ablation studies to justify our design choices, including pairwise loss reweighting, regularization weight, and one-step stride. Overall, our TD approach can be a general drop-in that enforces cross-time consistency and improves generation quality across different diffusion generative models.

07.
medRxiv (Medicine) 2026-06-15

Comparative Analysis of Machine Learning Models vs. Traditional Clinical Calculators for Cardiovascular Risk Prediction

Background: Cardiovascular diseases (CVD) remain the leading global cause of mortality, responsible for approximately 31% of all deaths worldwide in 2021. Traditional risk calculators, including Framingham, ASCVD, SCORE, and SCORE2, have long constituted the cornerstone of primary prevention strategies; however, they were derived predominantly from high-income European and North American populations, thereby limiting their predictive accuracy in diverse epidemiological contexts, particularly among Hispanic/Latino communities. Machine learning (ML) offers an alternative to capture the non-linear interactions inherent in biomedical data. Objective: The present study develops and validates ML-based models for cardiovascular mortality prediction using the National Health and Nutrition Examination Survey (NHANES) 1999-2018 dataset, and systematically compares their discriminative performance against eleven conventional clinical CVD risk calculators. Materials and Methods: A dedicated software platform, "CardioPrediQ," was designed to integrate multiple CVD calculators with ML-based risk assessment. A cohort of 12,847 participants with 16 predictor variables was derived from NHANES. Six algorithms (Logistic Regression, Cox Proportional Hazards, Gradient Boosting, AdaBoost, Random Forest, and Extra Trees) were trained in combination with six class-balancing strategies, yielding 36 model configurations. All models were trained on a stratified 70/30 split and calibrated using the Saerens prior probability adjustment method. Performance was evaluated using AUC-ROC, sensitivity, specificity, F1-score, and a weighted composite score. DeLong's test was employed to assess the statistical significance of AUC differences between the best-performing ML model and each conventional calculator. Results: Gradient Boosting with 2:1 oversampling and Saerens calibration achieved the best overall performance (AUC = 0.8934; composite score = 0.7904), outperforming all traditional calculators in composite ranking. The top six positions were occupied exclusively by ML and statistical models. The mean age of cardiovascular decedents was 67.43 years compared with 47.74 years among survivors. DeLong's test confirmed statistical superiority over six traditional CVD calculators (p < 0.05), whereas the difference against the top-performing calculators (ASCVD, HEARTS Caribbean, ASCVD Colombia, SCORE2, HEARTS North America) did not reach statistical significance. Age dominated feature importance at 41.2% relative weight, followed by systolic blood pressure (18.7%). Saerens calibration reduced the Brier score from 0.1286 to 0.1158, substantially improving probability calibration. Conclusions: ML models demonstrated superior composite performance over traditional calculators. The statistical equivalence with the highest-performing conventional calculators in the NHANES cohort is context-dependent and validates the methodological pipeline. The CardioPrediQ platform addresses the critical need for integrated, scalable CVD risk assessment tools, which is particularly relevant for Latin American populations where calculator validation remains limited. These findings support the integration of calibrated ML-based risk prediction into clinical practice while underscoring the importance of probability calibration for informed clinical decision-making.

08.
arXiv (CS.LG) 2026-06-17

SpatioTemporal Causal Network Diagnostics for Geographic Tipping Point Early Warning

arXiv:2606.17553v1 Announce Type: new Abstract: Geographic tipping points in ecosystems, climate subsystems, or ice sheets pose severe challenges for localized early warning. Classical spatial indicators such as Moran's I summarize global spatial structure, but they struggle with three issues: spatial dilution, Euclidean assumptions, and correlated noise. This paper introduces SpatioTemporal Causal Network Diagnostics (ST-CND), a framework that addresses these three issues by representing the geographic field as a time-evolving directed causal network. The core workflow is as follows: (1) infer which spatial nodes help predict other nodes via transfer entropy, replacing fixed Euclidean neighborhoods with data-driven information-flow topology; (2) estimate local recovery rates within each candidate subnetwork via dynamic mode decomposition; and (3) identify the most vulnerable subnetwork by combining three signals, namely high internal fluctuation, high internal synchronization, and low external coupling, thereby suppressing false alarms from spatially correlated noise. Validated on synthetic bifurcations and two observational sea-surface temperature benchmarks, namely Indo-Pacific SST and North Atlantic AMOC, ST-CND delivers localized and interpretable warnings. On the AMOC task, it achieves an AUROC of 0.783 and a critical-subnetwork IoU of 0.378, outperforming recurrence-network and lambda-AR1 baselines. The framework provides an interpretable and scalable pipeline for spatial early warning in Earth system science.

09.
arXiv (CS.CV) 2026-06-19

Stitching and dimensionality effects on large artificially generated volume datasets

Generating large images via deep learning requires patching input data to accommodate hardware memory limitations, then assembling output patches, a process that can introduce stitching artifacts when neighboring patches do not align at borders. While these artifacts are known to affect segmentation tasks, their impact on generative models for style-transfer remains poorly understood. We investigated three stitching approaches and two patch dimensionalities (2D vs 3D) using cycleGAN models trained on cryo-electron microscopy datasets. We evaluated both perceptual quality and performance on downstream mitochondria segmentation. Our key findings reveal that: (1) FID scores fail to detect subtle stitching artifacts that significantly impact downstream segmentation performance, (2) 3D models with artifact-free stitching marginally outperform 2D models on downstream tasks, though the improvement barely justifies the computational cost, and (3) 2D models train more stably due to larger batch sizes. Additionally, we demonstrate that ensembling predictions from three orthogonal directions can improve low-quality volumes but provides no benefit for high-quality outputs. These results demonstrate that maximizing generative model performance on large scientific datasets requires careful consideration and mitigation of stitching artifacts, and that perceptual metrics alone are insufficient for evaluating domain adaptation quality in biomedical imaging.

10.
arXiv (CS.LG) 2026-06-15

Running the Gauntlet: Re-evaluating the Capabilities of Agents Beyond Familiar Environments

arXiv:2606.14397v1 Announce Type: new Abstract: As agentic systems continue to evolve and are widely deployed in real-world scenarios, there is a growing demand to faithfully evaluate their capabilities. However, current benchmarks are typically built on popular applications with relatively simple tasks and focus on a narrow set of capabilities while overlooking broader dimensions, resulting in saturated performance on modern agents and failing to probe their limitations. To this end, we introduce GauntletBench, a web-based benchmark for evaluating agent generalisation in challenging scenarios, focusing on three underexplored capabilities (temporal perception, graphical understanding, and 3D reasoning), across five less-covered professional applications (Video Editor, Workflow Builder, 3D Modeller, Flight Analyser, and Circuit Designer), each with 20 vision-intensive tasks (100 in total). Our benchmark provides a modular pipeline that comprises an environment compatible with both open- and closed-source agent frameworks, a controlled web-based application, a well-structured task suite, and an automated evaluation engine with diverse metrics. Contrary to widespread expectations, our empirical results reveal that frontier agentic systems remain far from achieving human-level performance. Even the state-of-the-art agent achieves only a 19.1% success rate on our GauntletBench, highlighting the limitations in these overlooked capabilities and generalisation. By comparison, non-expert human annotators achieve over 80% success on our challenging yet feasible tasks, revealing the substantial gap between current agent capabilities and those required for complex real-world scenarios.

11.
arXiv (CS.AI) 2026-06-18

Attribution-Guided and Coverage-Maximized Pruning for Structural MoE Compression

arXiv:2606.18304v1 Announce Type: cross Abstract: Mixture-of-Experts (MoE) models scale compute efficiently, yet remain expensive to deploy due to their substantial memory footprint and inference overhead. Prior compression methods mainly operate at the expert level, either removing entire experts or ranking experts by coarse-grained importance scores. However, such expert-wise decisions are often too coarse to capture fine-grained redundancy, leading to misallocated pruning budgets and limited compression. To address this problem, we observe that information within MoE experts is highly concentrated in a small subset of channels, leaving substantial redundancy even in experts deemed important. Based on this observation, we propose a structural pruning framework tailored for MoE models. Our method reformulates prune-ratio allocation as a channel-score coverage maximization problem and solves it efficiently using an attribution-based approximation. Experiments on DeepSeek and Qwen MoE models show that our method preserves model accuracy under 50% or 25% structured pruning when combined with 4-bit quantization. On Qwen3-30B-A3B, our approach reduces memory footprint by 5.27$\times$ and consistently outperforms state-of-the-art baselines across diverse benchmarks.

12.
arXiv (CS.AI) 2026-06-19

Contagion Networks: Evaluator Bias Propagation in Multi-Agent LLM Systems

作者:

arXiv:2606.20493v1 Announce Type: cross Abstract: When large language models serve as evaluators in multi-agent systems, their systematic evaluation biases propagate through the agent network. We introduce Contagion Networks, a formal framework for measuring how evaluator biases spread across interacting LLM agents. In a controlled 3-agent experiment using DeepSeek-chat with three distinct evaluator bias profiles (structured, balanced, evidence-based), we measure the Cross-Agent Contagion Matrix Gamma_3 and find that evaluator biases consistently propagate between agents (gamma in [0.157, 0.352]), even within the same underlying model. We identify three propagation regimes governed by the spectral radius rho(Gamma_N), and demonstrate that homogeneous-model agents produce contagion coefficients 3-5x weaker than cross-model coefficients observed in prior work (MM-EPC: gamma approx 0.85-1.3), placing them in the suppression regime. We show that increasing evaluator committee size from k=1 to k=3 reduces effective contagion by 72.4%, providing an actionable mitigation strategy. We release the open-source Contagion Network experimental framework.

13.
arXiv (CS.AI) 2026-06-12

ReSET: Accurate Latency-Critical NVFP4 Reasoning via Step-Aware Temperature Scaling

arXiv:2606.13233v1 Announce Type: cross Abstract: Large reasoning models (LRMs) improve complex problem-solving by generating long intermediate reasoning traces, but this substantially increases inference costs. NVFP4 inference offers a promising approach to reduce both computational and memory costs through hardware-supported low-precision execution. However, directly applying NVFP4 to LRMs introduces two practical limitations: reasoning accuracy degrades under quantization, and existing NVFP4 kernels do not fully realize latency benefits in small-batch autoregressive decoding. In this work, we analyze the effect of NVFP4 quantization on token-level uncertainty during reasoning. We show that quantization increases incorrect sampling at low-entropy symbolic tokens, while causing over-concentration on a small set of tokens in high-uncertainty reasoning steps. Based on this observation, we propose ReSET, a reasoning-step entropy-based temperature-scaling method that estimates step-level uncertainty online and adapts the decoding temperature using both token-level and step-level entropy signals. To address the latency gap, we further design a CUDA-core small-$M$ NVFP4 kernel for latency-critical autoregressive decoding. Across reasoning benchmarks and model scales, ReSET improves NVFP4 reasoning accuracy by up to $\sim\!$2 points over the NVFP4 baseline. Our CUDA-core small-$M$ kernel further improves latency-critical decoding, delivering up to $2.5\!\times$ kernel-level speedup over NVFP4 vLLM and approximately $2\!\times$ end-to-end decoding speedup over BF16. Code is available at https://github.com/aiha-lab/ReSET.

15.
arXiv (quant-ph) 2026-06-15

Quantum geometrical description of hole spin qubits far away from the $\Gamma$-point

arXiv:2606.14683v1 Announce Type: cross Abstract: Hole spin qubits provide one of the leading platforms for spin-based quantum computing due to their large intrinsic spin-orbit interaction (SOI), which enables fast electrical manipulation. The SOI of planar quantum dots has mostly been investigated in theoretical studies by examining the SOI already present in the two-dimensional hole gas (2DHG). Here, we study the SOI created by the in-plane confinement by deriving non-perturbative effective Hamiltonians numerically for hole spin qubits. We find that the quantum geometry of the 2DHG naturally emerges, leading to a meaningful non-perturbative definition of pseudospin valid far away from the $\Gamma$-point. The SOI of the 2DHG and of the in-plane confinement have different forms; therefore, they cannot be turned off simultaneously, ruining the perfect spin-orbit switch functionality of spin qubits. We construct effective Hamiltonians using the symmetry approach for various low-dimensional hole systems: (i) a heavy-hole confined in a SiGe/Ge/SiGe heterostructure, (ii) a light-hole confined in SnGe/Ge, (iii) a gate-defined nanowire in SiGe/Ge/SiGe, and (iv) a hole confined in a Ge/Si core/shell nanowire. The non-perturbative effective Hamiltonians provide results with excellent agreement with the full Hamiltonians.

16.
arXiv (CS.AI) 2026-06-17

Agentic AI-based Framework for Mitigating Premature Diagnostic Handoff and Silent Hallucination in Healthcare Applications

arXiv:2606.18068v1 Announce Type: new Abstract: Recent advances in Large Language Models (LLMs) and multi-agent systems have driven the rise of Agentic AI, showing promise for medical reasoning. However, open-ended conversational agents remain prone to two critical failure modes: premature diagnostic handoff and silent clinical hallucinations that may go undetected before reaching the patient. In this work, we propose a multi-agent framework that addresses both issues by replacing ``LLM-as-a-judge'' routing with deterministic orchestration constraints. The framework incorporates two safety mechanisms. First, a neuro-symbolic state-tracking gate enforces completeness of the OLDCARTS clinical protocol (Onset, Location, Duration, Character, Aggravating/Alleviating factors, Radiation, Timing, and Severity) by blocking diagnostic transitions until all required dimensions are collected. Second, an epistemic uncertainty quantification (UQ) gate computes semantic entropy (H) across K=5 independent diagnostic samples to identify and intercept divergent outputs before delivery. We evaluate the system using simulated patient agents powered by the llama-3.1-70b-instruct model on 150 test cases. The full architecture achieves 49.3% diagnostic precision, representing an absolute improvement of 11.3 percentage points over an unconstrained baseline. Additionally, we observe a statistically significant negative correlation (r = -0.181, p < 0.05) between OLDCARTS completeness (\sigma) and semantic entropy (H), suggesting that structured information gathering is associated with reduced diagnostic uncertainty.

17.
arXiv (CS.AI) 2026-06-16

Beyond Models: Reflections on Engineering AI-enabled Systems in a Project-Based Course

arXiv:2606.16842v1 Announce Type: cross Abstract: Teaching Software Engineering for AI-enabled systems entails addressing the integration of AI components within full-scale software architectures under realistic constraints. While machine learning courses emphasize model development, students often lack experience in architectural design, deployment, and monitoring of AI-enabled systems. Empirical evaluations of such system-oriented AI courses remain limited. This paper reflects on the design and implementation of a project-based master's-level course titled AI Algorithms: Theory and Engineering, at the University of Bremen, in which students developed a movie recommendation system while making architectural design decisions to address challenges related to scalability, deployment, and evolving requirements. We conducted a mixed-methods study combining analyses of student submissions and questionnaire responses to investigate integration challenges, learning outcomes, and opportunities for improvement. Our results indicate persistent difficulties in early architectural decisions, heterogeneous ML integration, evolving requirements, and data management, largely due to uneven ML and software engineering expertise. From the educator's perspective, the course fostered system-level reasoning and strengthened awareness of data-centric ML practices in AI-enabled systems.

18.
arXiv (CS.AI) 2026-06-16

Looking Is Not Picking: An Attention-Segment Account of Tool-Selection Failures in LLM Agents

作者:

arXiv:2606.16364v1 Announce Type: new Abstract: LLM agents mis-call tools, and the natural guess is that the model failed to see the right tool in a crowded harness. We show the opposite through a lens concurrent work sets aside – the model's attention to labeled tool-definition segments. On real BFCL failures, by per-candidate attention argmax the model attends most to the correct tool 80% of the time (vs. 21% chance), and the gold is the under-attended segment on only 10%: it looks at the right tool and still picks wrong. This directly refutes the intuitive "crowded-harness / lost-in-the-middle" explanation: the failure is at the decision readout, not the harness, and we pin it there three ways. (1) Input vs. readout: repairing the prompt (reordering or duplicating the gold tool) recovers

19.
arXiv (CS.CV) 2026-06-15

Fusion of Pervasive RF Data with Spatial Images via Vision Transformers for Enhanced Mapping in Smart Cities

In this paper, we present a deep learning-based approach that integrates the DINOv2 architecture to improve building mapping by combining (possibly erroneous) maps from open-source platforms with pervasive radio frequency (RF) data collected from multiple wireless user equipments and base stations. Unlike prior methods, our approach leverages a vision transformer-based architecture to jointly process both RF and map modalities within a unified framework, effectively capturing spatial dependencies and structural priors for enhanced mapping accuracy. For the evaluation purposes, we employ a synthetic dataset co-produced by Huawei. To address the challenges associated with real-world data imperfections, we introduce controlled noise to its RF data so as to simulate real-world conditions. Additionally, we develop and train a model that leverages only aggregated path loss information to tackle the mapping problem. We measure the results according to three performance metrics: the Jaccard index (intersection over union, IoU), the Hausdorff distance, and the Chamfer distance. Our design achieves a macro IoU of 65.3%, significantly surpassing (i) the erroneous maps baseline, which yields 40.1%, (ii) an RF-only method from the literature, which yields 37.3%, and (iii) a non-AI fusion baseline that we designed which yields 42.2%. The comparative evaluation highlights the limitations of relying solely on RF data or on spatial data, as well as the effectiveness that AI can have on fusing data towards enhancing smart city mapping accuracy. We further validate our method on real-world data from the Oslo region, complementing the synthetic evaluation with a real deployment setting, where our best fusion model reaches 64.9% macro IoU. We additionally outline a strategy for deploying the model over larger areas by tiling the region with overlapping windows.

20.
arXiv (CS.CL) 2026-06-16

Rhythm of the Deep: A Computational-Linguistic Test of Duality of Patterning in Sperm Whale Codas

Human language has often been described as combining structure at two levels: lower-level units combine into larger units, which then combine into larger sequences. We test for this design feature, duality of patterning, in sperm whale codas using 1,483 codas from the Dominica Sperm Whale Project. Because acoustic similarity can imitate symbolic structure, we treat the problem as computational-linguistic structure discovery from continuous audio rather than as a direct claim about language or meaning. We use a consensus of frozen audio encoders, held-out structural tests, per-statistic nulls, and acoustic-null recoverability gates. The evidence supports a narrow two-tier architecture. At the lower tier, clicks compose into codas not by a stable ordered rule, but by which clicks are present together with their inter-click rhythm. At the upper tier, coda tokens show bout-level sequential dependence, with an NSB second-order transfer-entropy lift of 0.132 bits (p = 0.002). Under tempo scaling, encoder-derived click identity is strongly rate-bound, while coda identity remains substantially more stable, yielding a measurable abstraction gradient across the click-to-coda step. Rhythm-only baselines recover substantial lower-tier structure but fail to reproduce the upper-tier sequential-dependence signal. We do not claim language, semantics, perception, or human-like phonemes. Instead, we report representation-level evidence for a duality-of-patterning-like architecture whose lower tier is rhythmic rather than segmental, and provide a portable null-controlled framework for testing combinatorial structure in induced acoustic token systems.

21.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.

22.
arXiv (CS.CL) 2026-06-11

Fine-tuning Multi-modal LLMs with ART: Art-based Reinforcement Training

There are two main Parameter-Efficient Fine-Tuning (PEFT) techniques for Large Language Models (LLMs). While Low-Rank Adaptation (LoRA) introduces additional weights between the LLM layers, Soft Prompting introduces additional fine-tuning-specific raw tokens to an LLM input. However, both require modification to the computational graphs of precompiled, preoptimized LLMs. As a result, neither is fully supported in high-throughput engines like vLLM. We propose fine-tuning with ART (Art-based Reinforcement Training). The method injects information into a frozen Multimodal Large Language Model (MLLM) by optimizing only its raw visual input, thus enabling the soft-token approach on pre-compiled computational graphs. It relies on backpropagation of gradients back into a plain pixel array and thus supports any fine-tuning objective. Moreover, the optimized visual input can be stylized as task-relevant computational artworks. The approach's effectiveness is confirmed for different sizes of a popular open Qwen architecture and for several textual benchmarks. Specifically, ART reaches accuracy competitive with LoRA across mathematics and structured-tool-use benchmarks.

23.
arXiv (CS.LG) 2026-06-16

Model Stealing Through the Lens of Model Multiplicity

arXiv:2606.15493v1 Announce Type: new Abstract: Model stealing attacks, where adversaries create high-fidelity surrogate models, are a significant threat to the intellectual property of machine learning services. Conventional wisdom suggests these surrogates could provide adversaries with economic leverage comparable to the original service providers. This paper challenges this assumption by evaluating model stealing attacks beyond mere fidelity to the target model. Because query-based extraction provides only partial supervision of the target's input-output behavior, the surrogate is not uniquely identified: many near-optimal surrogates can achieve comparable fidelity while differing in deployment-relevant properties. Instead of performing a classic learning-based model stealing attack, we compute the Rashomon Set (i.e., the set of almost-equally-accurate models) of surrogate models, and evaluate its diversity using multiplicity metrics (ambiguity, discrepancy, and Rashomon Capacity) and group fairness metrics. Across tabular, medical imaging, and NLP tasks, our experiments on real-world datasets reveal that despite exhibiting similar fidelity to the target model, surrogate models can display significant variances in other critical performance metrics. These findings cast doubt on the presumed equivalence between high-fidelity surrogates and the target model in practical deployment scenarios.

24.
arXiv (CS.AI) 2026-06-18

Sparsity Curse: Understanding RLVR Model Parameter Space from Model Merging

arXiv:2606.18521v1 Announce Type: cross Abstract: Reinforcement Learning with Verifiable Reward (RLVR) has emerged as a powerful post-training paradigm that surpasses Supervised Fine-Tuning (SFT) in eliciting reasoning intelligence and resisting catastrophic forgetting. Recent studies further reveal that RLVR induces highly sparse and off-principal parameter updates compared to SFT. This naturally raises the question: does such sparsity make RLVR models more amenable to model merging? If so, model merging would offer a scalable, training-free path to aggregate diverse reasoning capabilities from independently trained RLVR models. Surprisingly, we find the opposite, uncovering a sparsity curse: the sparse RLVR updates are spread farther apart in parameter space, forming near-orthogonal shortcuts that make aggregation inherently fragile. This is likely rooted in the stochasticity of RL optimization and the diversity of emergent reasoning patterns. Unlike SFT models that converge to shared, flat basins and merge naturally, RLVR models suffer severe degradation under standard merging methods. Through systematic empirical analysis of the update geometry, we characterize the mechanisms behind this failure and propose Sensitivity-aware Resolving Merging (SAR-Merging), a merging recipe tailored for the unique structure of RLVR parameter spaces. SAR-Merging resolves conflicts in overlapping update regions via Fisher Information-based sensitivity arbitration, followed by magnitude-aware sparsification and rescaling to preserve fragile reasoning pathways. Experiments on mathematical and coding benchmarks demonstrate that SAR-Merging substantially outperforms existing merging methods on RLVR models, enabling both single-task enhancement and multi-capability fusion.

25.
arXiv (CS.LG) 2026-06-19

Topological Data Analysis for High-Dimensional Dynamic Process Monitoring

arXiv:2606.20443v1 Announce Type: cross Abstract: Real-time process monitoring requires methods that extract actionable information from high-dimensional time-series data. In this work, we present a new approach for process monitoring that combines tools of topological data analysis (TDA) and machine learning. In the proposed approach, we represent multivariate time-series data as manifolds and use topological descriptors to summarize the structure of such data; we then use a neural ordinary differential equation to learn the dynamic evolution of the topological structure of the system. Using real data from an industrial process, we show that this trajectory-based event detection approach is effective at detecting diverse types of events. We contrast this approach against reconstruction-based approaches such as principal component analysis and autoencoders and against a trajectory-based approach that uses Koopman autoencoders.