Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-15

Active Inference for Adaptive Traffic Signal Control in Noisy Nonstationary IoT Environments

arXiv:2606.13698v1 Announce Type: cross Abstract: Urban traffic signal control at IoT-instrumented intersections must remain effective under sensor occlusion, weather attenuation, and nonstationary demand. Conventional controllers degrade under these conditions, and learned policies remain difficult to audit. To address these challenges, we propose an active inference controller for a four-arm signalized intersection that dynamically selects phases by minimizing expected free energy (EFE) over Gaussian beliefs about per-direction congestion levels, yielding a fully traceable decision pipeline. We benchmark the controller in a SUMO traffic simulator against a rule-based heuristic and a deep Q-network (DQN) across four scenarios that progressively increase noise and nonstationarity, spanning sensor occlusion, adverse weather, and stochastic accidents. Across 100 independent random evaluations per scenario, active inference attains the lowest idle times and CO2 emissions in the noisiest scenarios (56,977 s and 29.12 kg vs. 71,741 s and 30.56 kg for DQN). These gains come at a modest cost in bus priority service rate and phase switch frequency.

02.
arXiv (CS.AI) 2026-06-16

Post-Hoc Merging is Not Enough: Many-Shot Model Merging with Loss-Gap Balancing

arXiv:2606.16501v1 Announce Type: new Abstract: Model merging has become a practical post-training strategy for building a single multi-task large language model (LLM) by combining multiple task-specialized models. However, most existing approaches rely on post-hoc merging, in which task-specific models are merged only once after training. This one-shot aggregation often suffers from task interference, leading to information erasure across individual tasks. In this work, we show that replacing post-hoc merging with an iterative many-shot merging protocol is effective in improving multi-task performance. Building on this insight, we propose METIS, Mitigating Erasure from Task Interference for Stable many-shot merging. METIS is a loss-aware many-shot merging method that addresses information erasure in post-hoc merging through task-wise loss-gap weighting and consensus-based masking. Notably, METIS exhibits significant performance improvement on the worst-performing task, effectively mitigating information erasure. (Project page: https://imkyungjin.github.io/METIS/)

03.
arXiv (quant-ph) 2026-06-19

Thermodynamic Value of XOR-Game-Induced Side Information in a Szilard Engine

arXiv:2605.12044v3 Announce Type: replace Abstract: We introduce a Szilard-type thermodynamic valuation of side-information channels induced by Bell-type correlations. In each round, a two-level working system is thermalized with a degenerate Hamiltonian, so that its physical microstate is a uniform classical bit. A trusted referee embeds this bit into a finite two-player XOR game, and a correlation resource produces a compressed controller bit. The controller uses only this compressed bit as side information for feedback. The construction is formulated first for arbitrary finite XOR games. The referee encoding makes the game-winning event equivalent to correct prediction of the physical microstate. Consequently, the induced side-information channel is binary symmetric, with success probability equal to the XOR-game winning probability of the supplied behaviour. The reversible Szilard feedback value is therefore fixed by the mutual information between the microstate and the controller record. Optimizing over local, quantum, and nonsignalling behaviour sets turns the corresponding game values into local, quantum, and nonsignalling thermodynamic ceilings. The construction is an effective-channel valuation, not a claim that Bell nonlocality is thermodynamic fuel. The controller receives only the compressed prediction bit, not the auxiliary variables that define the game. The thermodynamic costs of the referee, the correlation resource, and the preprocessing are not included. When controller-memory reset is included in a full cycle, the net work is non-positive, consistently with the second law.

04.
arXiv (CS.LG) 2026-06-12

Fourier Multi-Component and Multi-Layer Neural Networks: Unlocking High-Frequency Potential

arXiv:2502.18959v3 Announce Type: replace Abstract: The architecture of a neural network and the choice of its activation function are both fundamental to its performance. Equally important is ensuring that these two elements are well matched, as their alignment is key to effective representation and learning. In this paper, we introduce the Fourier Multi-Component and Multi-Layer Neural Network (FMMNN), a model that combines sine-type activations with the multi-component and multi-layer structure of MMNNs. In an FMMNN, each component is represented as a trainable linear combination of fixed random sine-type basis functions, while multi-layer composition generates more complex and adaptive high-frequency features. We establish that FMMNNs retain exponential expressive power for function approximation even under a low-rank architectural structure. We also analyze the optimization landscape of FMMNNs and find it to be substantially more favorable than that of standard fully connected neural networks, especially for high-frequency targets. In addition, we propose a scaled random initialization method for the first-layer weights in FMMNNs, which accelerates training and improves final performance when sufficient samples are available. Extensive numerical experiments support our theoretical insights, showing that FMMNNs achieve strong accuracy and favorable convergence behavior on oscillatory function-approximation benchmarks.

05.
Nature (Science) 2026-06-10

Mitochondria tethered to the nucleus secure its energy supply

Direct interactions between the cell’s powerhouses and nuclear pores might channel energy straight into the nucleus, fuelling cell division and differentiation. Direct interactions between the cell’s powerhouses and nuclear pores might channel energy straight into the nucleus, fuelling cell division and differentiation.

07.
medRxiv (Medicine) 2026-06-17

Clinical Study Protocol of the 'Biomarkers of Severity of COVID-19 Patients' (BIOMARCOVID) Project

Introduction The coronavirus disease 2019 (COVID-19) pandemic has challenged health care systems worldwide, in certain areas exceeding hospital capacities and human resources. This has underscored the importance of having better tools to predict the outcome of potentially severe respiratory infections such as SARS-CoV-2. Predicting COVID-19 severity may allow physicians to better manage ICU beds and increase the chances of patient survival through appropriate management. During the toughest months of the pandemic, most physicians tried to identify patients that might develop severe forms based primarily on clinical features on admission (e.g., BMI, age). In this context, significant research has focused on identifying comorbidities, clinical manifestations, and routine blood biomarkers to predict disease severity. However, despite the demonstrated value of untargeted metabolomics in assessing severity, limited data exist on its use for identifying novel metabolite biomarkers that could improve both the sensitivity and specificity of outcome prediction. Our goal is to identify metabolite biomarkers that could enhance the predictive accuracy of standard medical biology data and clinical parameters. Methods and analysis This is a retrospective, observational, monocentric cohort study conducted at the Centre Hospitalier Universitaire Grenoble Alpes (CHUGA). The maximum number of eligible patients admitted for PCR-confirmed COVID-19 between March and December 2020 will be included. Severity outcome is defined using the WHO 10-category ordinal scale (mild: categories 4-5; severe: >5). Blood samples were collected within 48 hours of admission and analyzed for 62 routine blood tests and untargeted multiplatform LC-MS/MS metabolomics across four national platforms. Statistical analysis will include logistic regression with variable selection for the primary aim, and multi-block chemometric integration of clinical, biological, and metabolomics data as a secondary aim. Ethics and dissemination A study steering committee has been formed to ensure the accuracy of the collected data by thoroughly reviewing it prior to the data lock. All aspects of the study comply with ethical standards, including approval by the CHUGA institutional review board and adherence to CNIL Reference Methodology MR004 for the protection of participants' rights, privacy, and confidentiality. This study is registered on the French Health Data Hub (number F20210218154851). Results will be disseminated through peer-reviewed publications, presentations at national and international scientific and clinical conferences, and reports shared with key healthcare system stakeholders.

08.
arXiv (CS.LG) 2026-06-16

Towards Functional Correctness of Large Code Models with Selective Generation

arXiv:2505.13553v3 Announce Type: replace-cross Abstract: The hallucination of code generation models hinders their applicability to systems requiring higher safety standards. One critical bottleneck in addressing code hallucination is the difficulty of identifying the functional correctness of generated code, due to its unnatural form. We address this core bottleneck by automatically generating unit tests using dynamic code analysis tools, leveraging the executable nature of code. Accordingly, we propose a selective code generator that abstains from uncertain generations – based on the functional correctness evaluated by generated unit tests – to theoretically control the correctness among non-abstained answers, \ie the false discovery rate. Finally, we propose to use generated unit tests in evaluation as well as in learning for precise code evaluation, calling this paradigm FuzzEval. We demonstrate the efficacy of our method along with the controllability of code hallucination and reasonable selection efficiency.

09.
arXiv (math.PR) 2026-06-16

On the empirical spectral distribution of matrix perpetuities

arXiv:2605.31054v2 Announce Type: replace Abstract: We study matrix perpetuities, that is, solutions to affine fixed-point equations of the form \[ \mathbf{X} \stackrel{d}{=} \mathbf{A}\,\mathbf{X} \,\mathbf{A}^\top+\mathbf{B},\qquad (\mathbf{A},\mathbf{B})\mbox{ and }\mathbf{X} \mbox{ are independent}, \] with particular emphasis on the empirical spectral distribution of the solution. We first establish existence and uniqueness results by relating the problem to classical vector perpetuities, and then develop tools that preserve the matrix structure under orthogonal invariance. For positive semidefinite, orthogonally invariant models, we obtain power-law tail asymptotics for the expected empirical spectral distribution and show that the tail is governed by the largest eigenvalue. We also prove that, in the subcritical regime, the expected empirical spectral distribution of matrix perpetuities converges weakly, as the dimension tends to infinity, to the distribution of the corresponding free perpetuity. Our results are illustrated by matrix Beta prime perpetuities, for which explicit limiting spectral distributions are available.

10.
arXiv (CS.AI) 2026-06-16

A Multi-Level Architecture for Reusable Materials Ontologies – The OntoCrafter Ceramics Ontology (OCO) as Reference Implementation

arXiv:2606.14814v1 Announce Type: cross Abstract: The Materials Science and Engineering ontology landscape is fragmented along multiple axes simultaneously. Horizontally: a recent survey identified 94 ontologies of which over 40 are structurally incompatible; each new application domain – ceramics, polymers, batteries, smart materials – typically restarts ontology design from scratch. Vertically: EU regulation (CSRD, CSDDD, PPWR, CBAM, R2R, AI Act, ESPR) forces material, manufacturing, supply-chain, and lifecycle data into integrated digital product passports, leaving ontologies that only address horizontal fragmentation incomplete for any contemporary consumer. And mechanistically: a vocabulary that records that BNT-BT has $d_{33} \approx 580$ pC/N stores a fact but cannot surface why – Bi-6s$^2$ lone-pair stereo-activity, anomalous Born effective charges, soft modes, defect chemistry – without a systematic explanation skeleton. We propose a multi-level modular architecture with two independent classification axes – level of abstraction (L0 bridges, L1 material-agnostic laboratory-notebook, L2 material-class-specific, L3 categorical reasoning) and consumer audience (material vs. compliance) – in which the material-specific level is internally organised by a seven-tier mechanistic-explanation skeleton (Symmetry, Energy/DFT, Thermo/CALPHAD, Kinetics, Microstructure, Defect chemistry, Bonding) applicable to any crystalline ionic oxide. The level-and-audience modularity dissolves the horizontal fragmentation, the compliance audience absorbs the vertical regulation pressure, and the seven-tier organisation of Level 2 delivers the mechanistic explanation depth. We instantiate the architecture as the OntoCrafter Ceramics Ontology (OCO v0.94): 5,196 classes across 44 modules; 167,348 OWL axioms (40,454 logical); 1,674 properties; 829 cross-ontology bridge mappings; 1,172 SHACL shapes; 163 published competency questions.

11.
arXiv (CS.CL) 2026-06-11

K-Forcing: Joint Next-K-Token Decoding via Push-Forward Language Modeling

Autoregressive (AR) language modeling is the dominant paradigm for text generation, yet its sequential token-by-token decoding makes inference memory-bound and inefficient. Existing acceleration approaches, such as speculative decoding and diffusion language models, can yield speedups under certain conditions but do not directly address high-load batch serving–the scenario most critical for industrial-scale deployment. We introduce K-Forcing, a push-forward language modeling paradigm for joint next-k-token decoding. K-Forcing distills an existing AR model into a conditional push-forward mapping–one that transforms independent uniform noise variables into a joint sample of multiple future tokens in a single forward pass. This design preserves fixed-length outputs, reuses the AR teacher backbone, and remains compatible with standard AR serving infrastructure. We train this mapping via progressive self-forcing distillation, which gradually expands the prediction window while enabling the student to closely match the sequence distribution of the AR teacher. We evaluate K-Forcing on LM1B and OpenWebText using a standard causal Transformer backbone. When aggressively configured to generate k = 4 tokens per forward pass, K-Forcing delivers approximately 2.4-3.5x speedup across different batch sizes, while incurring modest quality degradation relative to its AR teacher. As inference increasingly dominates the lifetime compute cost of modern LLMs, K-Forcing offers a promising route toward accelerating AR generation under real-world high-load deployment.

12.
arXiv (CS.CV) 2026-06-11

SDQM: Synthetic Data Quality Metric for Object Detection Dataset Evaluation

The performance of machine learning models depends heavily on training data. The scarcity of large-scale, well-annotated datasets poses significant challenges in creating robust models. To address this, synthetic data generated through simulations and generative models has emerged as a promising solution, enhancing dataset diversity and improving the performance, reliability, and resilience of models. However, evaluating the quality of this generated data requires an effective metric. We introduce the Synthetic Dataset Quality Metric (SDQM) to assess data quality for object detection tasks without requiring model training to converge. This metric enables more efficient generation and selection of synthetic datasets, addressing a key challenge in resource-constrained object detection tasks. In our experiments, SDQM demonstrated a strong correlation with the mean average precision (mAP) scores of YOLO11, a leading object detection model, whereas previous metrics only exhibited moderate or weak correlations. In addition, it provides actionable insights into improving dataset quality, minimizing the need for costly iterative training. This scalable and efficient metric sets a new standard for evaluating synthetic data. The code for SDQM is available at https://github.com/ayushzenith/SDQM

13.
arXiv (CS.CL) 2026-06-11

Fanar-Sadiq: A Multi-Agent Architecture for Grounded Islamic QA

Large language models (LLMs) can answer religious knowledge queries fluently, yet they often hallucinate and misattribute sources, which is especially consequential in Islamic settings where users expect grounding in canonical texts (Qur'an and Hadith) and jurisprudential (fiqh) nuance. Retrieval-augmented generation (RAG) improves grounding, however, a single retrieve-then-generate pipeline is insufficient for diverse Islamic queries, including verbatim scripture, citation-grounded guidance, and rule-constrained computations such as zakat and inheritance. To address these challenges, we present Fanar-Sadiq, a bilingual Arabic-English Islamic QA system built on a multi-agent, tool-augmented architecture. It is a core component of the Fanar AI platform. Fanar-Sadiq routes Islamic queries to specialized modules within an agentic tool architecture. It supports intent-aware routing, retrieval-grounded fiqh answers with normalized citations and verification traces, exact verse lookup with quotation validation, and deterministic Sunni zakat and inheritance calculators with madhhab-sensitive branching. We evaluate the end-to-end system on public Islamic QA benchmarks and show strong effectiveness and efficiency. It is publicly accessible through an API and Web application and has received over 1.9M accesses in less than a year (https://api.fanar.qa/docs).

14.
arXiv (CS.AI) 2026-06-11

TileFuse: A Fused Mixed-Precision Kernel Library for Efficient Quantized LLM Inference on AMD NPUs

arXiv:2606.11357v1 Announce Type: cross Abstract: With the growing demand for on-device LLM inference, edge SoCs increasingly integrate NPUs to improve performance and energy efficiency under tight power and thermal budgets. However, practical LLM deployment on current client NPUs remains difficult: widely used quantization formats such as AWQ do not map cleanly onto many existing NPU software stacks, which are often proprietary and expose limited low-level control. In this work, we present TileFuse, a close-to-metal mixed-precision kernel library for AMD XDNA2 NPUs that targets transformer linear layers in quantized LLM inference. TileFuse brings practical low-bit formats such as AWQ-style W4A16 and W8A16 directly onto XDNA2, rather than forcing the model to be reshaped around an NPU-specific quantization scheme. TileFuse co-designs weight layout, metadata placement, mixed-precision microkernels, and array-level dataflow. Specifically, it fuses unpacking, dequantization, and GEMM/GEMV execution into a single kernel flow, introduces an interleaved pre-tiling layout that supports GEMM dimensions up to 32K, and redesigns GEMV dataflow to utilize the full 4x8 AIE array. Across kernel-level evaluations, TileFuse improves performance by up to 121.6% for GEMM and 281% for GEMV over full-precision baselines, while delivering more than 2x performance and energy-efficiency gains over strong iGPU baselines on GEMM. In end-to-end LLM experiments on Ryzen AI laptops, TileFuse achieves up to 2.0x lower prefilling latency with more than 64.6% lower energy consumption. Together, these results show that XDNA2 is a practical target for AWQ-style edge LLM inference and that native NPU support for off-the-shelf quantization can make NPUs substantially more usable in real client deployments.

15.
arXiv (CS.LG) 2026-06-16

Federated Foundation Language Model Post-Training Should Focus on Open-Source Models

arXiv:2505.23593v4 Announce Type: replace Abstract: Post-training of foundation language models has emerged as a promising research domain in federated learning (FL) with the goal to enable privacy-preserving model improvements and adaptations to user's downstream tasks. Recent advances in this area adopt centralized post-training approaches that build upon black-box foundation language models where there is no access to model weights and architecture details. Although the use of black-box models has been successful in centralized post-training, their blind replication in FL raises several concerns. Our opinion is that using black-box models in FL contradicts the core principles of federation such as data privacy and autonomy. In this paper, we critically analyze the usage of black-box models in federated post-training, and provide a detailed account of various aspects of openness and their implications for FL.

16.
arXiv (quant-ph) 2026-06-16

Quantum Algorithm for Open-System Battery Cathodes by Modeling Multiple Strongly Coupled Holstein Polarons with Chain-Mapped Caldeira-Leggett Dynamics

arXiv:2606.16017v1 Announce Type: new Abstract: Cathode lithiation occupies a chemical regime of tightly localized orbitals, narrow bandwidths, and strong electron-lattice coupling. The defining electrochemical observables (open-circuit voltage and differential capacity) are open-system, reservoir-equilibration quantities that closed-Hamiltonian quantum simulation cannot produce, set by exchange with electron, Li$^+$, and phonon baths. We present a fault-tolerant quantum algorithm that recovers them through a unitary chain-mapped Caldeira-Leggett embedding, rendering the baths Trotterizable. The resulting fourth-order Trotter step has a T-gate count polynomial in system size, validating its open-system dynamics against hierarchical equations of motion (HEOM) at strong coupling and the Lindblad limit at weak coupling. For single-carrier olivine LiFePO$_4$, a single voltage anchor on an otherwise DFT-fixed Hamiltonian places the differential-capacity peak within the $\pm5$ mV reproducibility of the experimental plateau. For multi-carrier spinel LiMn$_2$O$_4$, whose $1{:}1$ Mn$^{3+}$/Mn$^{4+}$ filling makes the inter-site Coulomb repulsion dynamically active, the same kernel yields a two-plateau voltage curve with a $125$ mV split, within $17\%$ of the observed $150$ mV. We deliver an end-to-end fault-tolerant resource estimate for such a multi-carrier, three-reservoir observable: $368$ logical qubits and $\sim3\times10^5$ T-gates per step, or $\sim1.7\times10^{12}$ T-gates for a full voltage curve (parallelizable over $\sim10^3$ trajectories), leaving the production-scale dynamical run as a milestone for future hardware. The same kernel reproduces macroscopic quantum coherence, two-band superconductivity, and the Mikheyev-Smirnov-Wolfenstein resonance without modification, placing dynamical battery chemistry and similar Hamiltonians within scope for fault-tolerant quantum simulation.

17.
arXiv (CS.LG) 2026-06-19

Meta Flow Maps enable scalable reward alignment

arXiv:2601.14430v2 Announce Type: replace-cross Abstract: Controlling generative models is computationally expensive. This is because optimal alignment with a reward function–whether via inference-time steering or fine-tuning–requires estimating the value function. This task demands access to the conditional posterior $p_{1|t}(x_1|x_t)$, the distribution of clean data $x_1$ consistent with an intermediate state $x_t$, a requirement that typically compels methods to resort to costly trajectory simulations. To address this bottleneck, we introduce Meta Flow Maps (MFMs), a framework extending consistency models and flow maps into the stochastic regime. MFMs are trained to perform stochastic one-step posterior sampling, generating arbitrarily many i.i.d. draws of clean data $x_1$ from any intermediate state. Crucially, these samples provide a differentiable reparametrization that unlocks efficient value function estimation. We leverage this capability to solve bottlenecks in both paradigms: enabling inference-time steering without inner rollouts, and facilitating unbiased, off-policy fine-tuning to general rewards. Empirically, our single-particle steered-MFM sampler outperforms a Best-of-1000 baseline on ImageNet across multiple rewards at a fraction of the compute.

18.
arXiv (CS.AI) 2026-06-12

PolyFlow: Safe and Efficient Polytope-Constrained Flow Matching with Constraint Embedding and Projection-free Update

arXiv:2606.13400v1 Announce Type: cross Abstract: While flow-based generative models have demonstrated strong performance across a wide range of domains, deploying them in safety-critical physical systems remains challenging due to strict constraint requirements. Existing approaches typically enforce safety through post-hoc corrections, which incur substantial computational overhead and may distort the learned distribution. We propose PolyFlow, a polytope-constrained flow matching framework that embeds constraints directly into the model and flow dynamics. PolyFlow introduces a discrete-time flow formulation and a projection-free architecture, which eliminate the discretization error and guarantee strict satisfaction of arbitrary polyhedral constraints, without the need for expensive iterative solvers. Experimental results show that PolyFlow achieves zero constraint violation while maintaining high distributional fidelity across a range of planning and control tasks. Compared to state-of-the-art constrained generation baselines, PolyFlow significantly reduces inference latency and demonstrates a favorable trade-off between safety, efficiency, and generative quality. Code is available on https://github.com/MJianM/PolyFlow.

19.
arXiv (math.PR) 2026-06-11

Markov property and path regularity for the solutions to SPDEs driven by cylindrical-martingale valued measures

arXiv:2606.12381v1 Announce Type: new Abstract: In this paper we prove the Markov property for the solution to stochastic partial differential equations driven by a cylindrical orthogonal martingale-valued measure. We assume our coefficients are time-dependent and satisfy some growth and Lipschitz conditions. We also prove that for time-independent coefficients and under mild assumptions on the cylindrical orthogonal martingale-valued measure, the solutions to our stochastic partial differential equations are Feller. Finally, in the case that the $C_{0}$-semigroup is quasi-contraction, we show that the solution to our stochastic partial differential equation possesses a càdlàg version.

20.
arXiv (CS.CL) 2026-06-15

Can Post-Training Turn LLMs into Good Medical Coders? An Empirical Study of Generative ICD Coding

Automated International Classification of Diseases (ICD) coding is a core medical-coding task for billing, epidemiology, and clinical decision support. Generative large language models (LLMs) are often reported as weak medical coders, but this finding mainly comes from inference-time settings such as prompting, retrieval, reranking, or tool use, leaving the role of task-specific post-training underexplored. We present a controlled empirical study of post-training for generative ICD coding, comparing discriminative baselines with LLM coders across prompting, supervised fine-tuning, and reinforcement learning under a common protocol and metric set. To our knowledge, this is the first study to evaluate RL-based post-training for generative LLM coders in ICD coding. We further introduce PHI, a diagnostic curriculum that extends GRPO to refine missed-code cases. Our results show that prompting-only evaluation substantially underestimates the potential of LLMs for ICD coding. SFT provides the main capability jump, GRPO further improves code-set prediction beyond SFT, and PHI provides targeted gains on macro-level performance. These findings suggest that the main bottleneck is not the generative formulation alone, but how the model is adapted and optimized for full-taxonomy recall. We release our code, data splits, and checkpoints at https://github.com/AlexandreWANG915/LLM4ICD.

21.
arXiv (CS.CV) 2026-06-19

Cinematic Compositing Using Character-Environment-Harmonized Video Generation Models

Cinematic compositing aims to integrate green-screen characters into novel environments while maintaining physical and photometric realism. Previous methods often fail to capture the complex bidirectional interactions between characters and their surroundings, which we characterize as Character-to-Environment (C2E) physical interaction and Environment-to-Character (E2C) lighting harmonization. To address this, we propose an end-to-end video diffusion framework that jointly models C2E and E2C interactions, specifically handling the challenges of interactive props. Our approach introduces a tri-mask-guided architecture with RGB-D joint denoising to ensure physically consistent interactions among the character, props, and environment. We further develop an efficient prior-driven data curation pipeline to construct high-quality relighting pairs without expensive rendering. Finally, a reference-conditioned mechanism enables controllable environment synthesis and precise prop replacement. Extensive experiments demonstrate that our framework significantly outperforms existing methods in cinematic-quality dynamic video compositing.

22.
arXiv (CS.LG) 2026-06-18

Beyond Prediction: Tail-Aware Scheduling for LLM Inference

arXiv:2606.18431v1 Announce Type: new Abstract: LLM serving exhibits extreme length variability, making size-based scheduling difficult in practice. Recent LLM schedulers approximate SJF/SRPT using predicted decode lengths or ranks and primarily report mean-centric metrics such as TTFT and TBT. We show that these prediction-driven policies can be fragile under distribution shifts, bursty arrivals, and GPU memory pressure, while offering limited control over the tail latency (P90-P99) that dominates user experience, even with perfect decode-length knowledge. We introduce a distribution-aware, prediction-free scheduling framework that replaces explicit length prediction with soft priority boosting driven by lightweight statistical signals. Our design co-optimizes scheduling and cache-aware preemption to account for memory-coupled decode dynamics across workload mixes. Evaluated on production and open-source traces, our method reduces P99 TTLT by up to 35-50% relative to SRPT with perfect length knowledge and reduces TTFT by 34-47% across workloads, including reasoning-heavy and chat-heavy tasks. These results demonstrate a robust alternative for optimizing tail latency in online LLM serving.

23.
arXiv (CS.CL) 2026-06-16

EHRNote-ChatQA: A Benchmark for Evidence-Grounded Multi-Turn Clinical Question Answering over Longitudinal Discharge Summaries

Discharge summaries are crucial clinical documents containing the context of a patient's overall hospital stay, and are routinely reviewed by medical experts for patient readmission, ongoing care, and diagnostic decision-making. When reviewing them, medical experts often must iteratively synthesize information across multiple summaries while verifying the evidence supporting each answer. Although large language models (LLMs) are increasingly explored for clinical question answering, existing benchmarks do not sufficiently reflect this setting: they often evaluate exam-style medical knowledge or focus on single-turn question answering with limited evidence-grounding evaluation. We introduce EHRNote-ChatQA, the first benchmark for evidence-grounded multi-turn clinical question answering over patients' multiple discharge summaries. Built from de-identified MIMIC-IV discharge summaries, EHRNote-ChatQA contains 967 patient-level multi-turn samples spanning one to five notes and 16,072 medical-expert-verified QA pairs (8,036 content questions, each paired with an evidence-grounding question) across eight clinical categories. The benchmark is constructed through an expert-informed pipeline combining discharge-summary structuring schema, expert-curated multi-turn QA templates, and LLM-based generation, followed by review and revision of every single QA sample by 11 medical experts. Benchmarking 22 open- and closed-source LLMs reveals several challenges, including that LLMs struggle more with evidence grounding than content answering, multi-turn errors compound across turns, and single-turn clinical QA performance does not reliably transfer to this setting. These findings establish EHRNote-ChatQA as a rigorous and practical benchmark for evaluating clinical QA systems. The dataset will be made publicly available through PhysioNet credentialed access.

24.
arXiv (CS.LG) 2026-06-16

DP-Hype: Federated Differentially Private Hyperparameter Search

arXiv:2510.04902v3 Announce Type: replace Abstract: Tuning hyperparameters in federated machine learning can substantially impact model performance. When hyperparameters are tuned on sensitive data, privacy becomes an important challenge and to this end, differential privacy has emerged as the de facto standard for provable privacy. A standard setting in federated learning is that clients agree on a shared setup, i.e., find a compromise from a set of hyperparameters, like a model's learning rate. Yet, prior work on privacy-preserving hyperparameter tuning is tailored to specific learning tasks, does not account for the privacy leakage of aggregated results, or offers a sub-optimal privacy-utility trade-off. In this work, we present our algorithm DP-Hype, which performs a federated and privacy-preserving hyperparameter search by conducting a federated voting based on local hyperparameter evaluations of clients. In this way, DP-Hype selects hyperparameters that lead to a compromise supported by a majority of clients, while maintaining scalability and independence from specific learning tasks. We prove that DP-Hype preserves the strong notion of differential privacy called client-level differential privacy and, importantly, show that its privacy guarantees do not depend on the number of hyperparameters. We also provide bounds on its utility guarantees, that is, the probability of finding good hyperparameters, and implement DP-Hype as a submodule in the popular Flower framework for federated machine learning. In addition, we evaluate performance on multiple benchmark data sets in iid as well as multiple non-iid settings and demonstrate high utility of DP-Hype even under small privacy budgets.

25.
arXiv (CS.AI) 2026-06-12

HarnessBridge: Learnable Bidirectional Controller for LLM Agent Harness

arXiv:2606.12882v1 Announce Type: new Abstract: Large language models are increasingly deployed as agents for long-horizon tasks, yet their performance is shaped not only by model capability and environment design, but also by the harness that mediates agent–environment interaction. Existing harnesses are largely manually engineered, making them difficult to scale as trajectories grow longer and interactions become more complex. In this work, we ask whether harness can be generated by a learnable plug-in module that can be trained in an end-to-end fashion. We introduce HarnessBridge, a lightweight learnable harness controller that parameterizes the agent–environment interface as a bidirectional projection. HarnessBridge learns two bidirectional projections: observation projection, which distills raw trajectories into compact, decision-relevant states, and action projection, which converts proposed actions into executable transitions or trajectory-grounded rejections. We train HarnessBridge on a harness supervision dataset via unified instruction tuning. On Terminal-Bench~2.0 and SWE-bench Verified, HarnessBridge matches or surpasses strong specialized harnesses while substantially reducing token usage and trajectory length, and generalizes from smaller generators to larger commercial models.