Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

02.
arXiv (CS.AI) 2026-06-17

No-Free-Fairness: Fundamental Limits and Trade-offs in Learning Systems

作者:

arXiv:2606.17810v1 Announce Type: cross Abstract: In this paper, we establish a set of theoretical impossibility results, termed the No-Free-Fairness theorems, that identify three fundamental sources of disparity in learning systems. First, we show that when a task exhibits irreducible cost on a subgroup, any decision rule must trade off overall performance with disparity, yielding an inherent fairness–cost frontier. Second, we prove that even in ideal, noise-free settings where a perfectly fair and accurate solution exists, finite-sample learning alone induces nontrivial subgroup disparity, ruling out distribution-free fairness guarantees. More seriously, enforcing strict relative fairness creates a statistical bottleneck: achieving low cost may require exponentially many samples. Third, we show that limitations of the model class can independently induce disparity: if the model cannot represent accurate solutions for a subgroup, fairness remains unattainable regardless of data or training procedure. Overall, these results demonstrate that unfairness is not solely a consequence of biased data or suboptimal optimization, but arises from the intrinsic structure of decision problems, the constraints of finite data, and the expressivity of models. Our framework applies broadly beyond standard supervised learning, and suggests that achieving fairness requires explicit trade-offs and should be treated as a core design consideration.

03.
Nature (Science) 2026-06-10

Light slows down carbon nanotubes in water

Water-suspended carbon nanotubes move more slowly in green light, suggesting that excited electrons in the tubes couple to the water through ‘quantum friction’. Water-suspended carbon nanotubes move more slowly in green light, suggesting that excited electrons in the tubes couple to the water through ‘quantum friction’.

04.
arXiv (CS.AI) 2026-06-16

Automated ultrasound doppler angle estimation using deep learning

arXiv:2508.04243v2 Announce Type: replace-cross Abstract: Angle estimation is an important step in the Doppler ultrasound clinical workflow to measure blood velocity. It is widely recognized that incorrect angle estimation is a leading cause of error in Doppler-based blood velocity measurements. In this paper, we propose a deep learning-based approach for automated Doppler angle estimation. The approach was developed using 2100 human carotid ultrasound images including image augmentation. Five pre-trained models were used to extract images features, and these features were passed to a custom shallow network for Doppler angle estimation. Independently, measurements were obtained by a human observer reviewing the images for comparison. The mean absolute error (MAE) between the automated and manual angle estimates ranged from 3.9{\deg} to 9.4{\deg} for the models evaluated. Furthermore, the MAE for the best performing model was less than the acceptable clinical Doppler angle error threshold thus avoiding misclassification of normal velocity values as a stenosis. The results demonstrate potential for applying a deep-learning based technique for automated ultrasound Doppler angle estimation. Such a technique could potentially be implemented within the imaging software on commercial ultrasound scanners.

05.
arXiv (CS.CV) 2026-06-16

Clinically Aware Synthetic Image Generation for Concept Coverage in Chest X-ray Models

Deep learning models for chest X-ray diagnosis are constrained by limited coverage of clinically meaningful concept combinations in publicly available training datasets. While synthetic image generation has been explored to increase data diversity, existing methods rarely enforce clinical or anatomical constraints, limiting utility for improving model reliability. We propose CARPA, a clinically aware and anatomically grounded framework for synthetic chest X-ray generation that applies targeted perturbations to clinical concept vectors while preserving anatomical structure. By producing anatomically faithful synthetic images with controlled concept insertions and deletions, CARPA expands clinically relevant concept coverage. We evaluate CARPA across seven backbone architectures by fine-tuning models on synthetic subsets and testing on a held-out MIMIC-CXR benchmark. Compared to prior concept perturbation approaches, fine-tuning on CARPA-generated images consistently improves precision-recall performance, reduces predictive uncertainty, and improves model calibration. Structural and semantic analyses demonstrate high anatomical fidelity, strong concept alignment, and low semantic uncertainty. Evaluation by two expert radiologists further confirms realism and clinical agreement. Together, these results show that anatomically grounded concept perturbations enable more effective use of synthetic data, improving both performance and reliability of chest X-ray classification models and supporting safer clinical deployment.

06.
PLOS Medicine 2026-05-08

Climate change and non-communicable diseases: An invisible syndemic

by Gokul Parameswaran, Sadeer Al-Kindi, Sanjay Rajagopalan Climate change accelerates non-communicable diseases (NCDs) through cascading environmental disruptions and is attributed to driving increased NCD-related mortality. Yet this syndemic remains invisible and underfunded. We detail why addressing the climate-NCD intersection is critical for improving health. In this Perspective, Sanjay Rajagopalan and colleagues discusses how climate change accelerates non-communicable diseases (NCDs) and exacerbates NCD-related mortality, and calls for greater visibility and funding to address this syndemic and improve human health.

07.
arXiv (CS.CV) 2026-06-19

LaTtE-Flow: Layerwise Timestep-Expert Flow-based Transformer

Recent advances in multimodal foundation models unifying image understanding and generation have opened exciting avenues for tackling a wide range of vision-language tasks within a single framework. Despite progress, existing unified models typically require extensive pretraining and struggle to achieve the same level of performance compared to models dedicated to each task. Additionally, many of these models suffer from slow image generation speeds, limiting their practical deployment in real-time or resource-constrained settings. In this work, we propose Layerwise Timestep-Expert Flow-based Transformer (LaTtE-Flow), a novel and efficient architecture that unifies image understanding and generation within a single multimodal model. LaTtE-Flow builds upon powerful pretrained Vision-Language Models (VLMs) to inherit strong multimodal understanding capabilities, and extends them with a novel Layerwise Timestep Experts flow-based architecture for efficient image generation. LaTtE-Flow distributes the flow-matching process across specialized groups of Transformer layers, each responsible for a distinct subset of timesteps. This design significantly improves sampling efficiency by activating only a small subset of layers at each sampling timestep. To further enhance performance, we propose a Timestep-Conditioned Residual Attention mechanism for efficient information reuse across layers. Experiments demonstrate that LaTtE-Flow achieves strong performance on multimodal understanding tasks, while achieving competitive image generation quality with around 6x faster inference speed compared to recent unified multimodal models.

08.
arXiv (CS.CL) 2026-06-11

Automated Creativity Evaluation of Language Models Across Open-Ended Tasks

Large language models (LLMs) have achieved remarkable progress in language understanding, reasoning, and generation, sparking growing interest in their creative potential. Realizing this potential requires systematic and scalable methods for evaluating creativity across diverse tasks. However, most existing creativity metrics are tightly coupled to specific tasks, embedding domain assumptions into the evaluation process, and limiting scalability and generality. To address this gap, we introduce an automated, domain-agnostic framework for quantifying LLM creativity across open-ended tasks. Our approach separates the measurement apparatus from the creative task itself, enabling scalable, task-agnostic assessment. Divergent creativity is measured using semantic entropy, a reference-free and robust metric for novelty and diversity, validated against human annotations, LLM-based novelty judgments and baseline diversity measures. Convergent creativity is assessed via a novel retrieval-based multi-agent judge framework that delivers context-sensitive evaluation of task fulfilment with over 60% improved efficiency. We validate our framework in three qualitatively distinct domains: problem-solving (MacGyver), research ideation (HypoGen), and creative writing (BookMIA), using a broad suite of LLMs. Empirical results show that our framework reliably captures key facets of creativity, including novelty, diversity, and task fulfilment, and reveal how model properties, such as size, temperature, recency, and reasoning, impact creative performance. Our work establishes a reproducible and generalizable standard for automated LLM creativity evaluation, paving the way for scalable benchmarking and accelerating progress in creative AI.

09.
arXiv (CS.CL) 2026-06-16

Dr-DCI: Scaling Direct Corpus Interaction via Dynamic Workspace Expansion

Agentic search over large corpora relies on retriever-mediated interfaces (e.g., BM25 or ColBERT) for scalable candidate discovery. While effective at ranking relevant documents, these interfaces expose evidence only as ranked results or bounded document views, limiting agents' ability to reorganize material and verify constraints across documents. Direct Corpus Interaction (DCI) addresses this limitation by exposing shell-executable corpus operations for flexible search, filtering, comparison, and verification. However, full-corpus terminal commands become slow and unstable as the corpus grows, degrading performance and efficiency. We introduce DR-DCI, a retriever-steered DCI framework that treats retrieval as an agent-callable action for expanding a local workspace. Rather than operating directly over the full corpus, the agent dynamically pulls relevant documents into an evolving workspace and conducts DCI operations within it. This design combines retriever-level recall with DCI-style precision: retrieval keeps exploration scalable, while DCI preserves the local operations needed for effective evidence resolution. Experiments show that DR-DCI is both effective and efficient across scales. On Browsecomp-Plus, DR-DCI reaches 71.2\% accuracy, improving over raw DCI and ablated variants by up to 8.3 points while reducing tool usage, wall time, and estimated cost. With workspace-preserving context reset, accuracy further improves to 73.3\%. In corpus-scaling experiments, DR-DCI remains effective from 100K to 10M documents, whereas raw DCI becomes unstable and BM25 performs substantially worse. DR-DCI also scales to a 20M-scale file-per-document Wiki-18 QA setting, achieving an average score of 63.0 across six benchmarks and outperforming retrieval-based and trained search-agent baselines. Ablation analysis further shows that ranked previews and inter-document DCI are key to performance.

10.
arXiv (CS.CV) 2026-06-18

CAOA – Completion-Assisted Object-CAD Alignment

Accurately aligning CAD models to their corresponding objects in indoor RGB-D scans is a central challenge in 3D semantic reconstruction. The task requires estimating a 9-Degree-of-Freedom (DoF) pose-position, rotation, and scale along three axes-but is hindered by noisy and incomplete scans, as well as segmentation errors that cause geometric distortions. We present Completion-Assisted Object-CAD Alignment (CAOA), a method that integrates a semantically and contextually aware point cloud completion module with a symmetry-aware relative pose estimation algorithm, enabling precise alignment of CAD models to scanned objects. Existing completion methods are typically trained and evaluated on synthetic datasets, which often fail to generalize to real-world scans. To bridge this gap, we introduce a synthetic data generation strategy tailored to indoor scenes, significantly reducing the synthetic-to-real domain gap-validated through quantitative comparisons with widely used completion datasets. In addition, we release S2C-Completion, an expert-annotated dataset of over 8,500 object-CAD pairs from Scan2CAD, created for real-world indoor single-object completion and intended as a new benchmark for this task. For object-CAD alignment, we incorporate symmetry information via a symmetry-aware loss, improving robustness to symmetric ambiguities. On the Scan2CAD benchmark, CAOA achieves a 17% accuracy improvement over state-of-the-art methods.

11.
medRxiv (Medicine) 2026-06-17

Womens intentions and motivations towards health behaviour change before pregnancy: a cross-sectional survey of pregnant women in Australia

Introduction: The preconception period (i.e. the weeks and months before pregnancy) is a critical window during which parental health behaviours can influence pregnancy outcomes and the childs long-term health. Modifiable factors such as nutrition, physical activity, substance use, and environmental exposures play a key role, yet womens ability to adopt and sustain healthy behaviours is shaped by complex psychological, social and environmental influences. This study applies the Theory of Planned Behaviour to identify the beliefs underpinning womens preconception behaviours, with the aim of informing support for effective and sustained health behaviour change. Methods: An Australian national retrospective cross-sectional survey of pregnant women (18-49 years), recruited through social media platforms. The 92-item survey captured respondent socio-demographics, pregnancy status and health conditions, health behaviours, and beliefs regarding preconception health behaviours. Respondents level of pregnancy planning was categorised using the London Measure of Unplanned Pregnancy (LMUP). Items regarding preconception beliefs were structured in accordance with the Theory of Planned Behaviour, with a focus on regular exercise, healthy diet, and alcohol avoidance. These beliefs variables were analysed using structured equation modelling to identify paths between latent variables and the items used to estimate each concept. Results: The study was completed by 430 pregnant women of whom 72.7% had a planned pregnancy. Most had a partner, were university educated and in good health. Structural equation modelling showed intention strongly predicted exercise ({beta}=0.65), healthy diet ({beta}=0.54) and alcohol avoidance ({beta}=0.64). Perceived control and partner norms influenced intentions, whereas health professional norms had limited effect. Positive beliefs were associated with folate supplement use and smoking cessation. Conclusion: These findings highlight intention as a key driver of preconception health behaviours, with perceived control and partner influences playing a more significant role than individual beliefs or health professional input. Effective interventions should therefore address structural barriers and actively involve partners, while respecting womens autonomy. Overall, couples-focused, multi-level strategies are likely essential to support meaningful and sustained preconception health behaviour change.

12.
arXiv (CS.AI) 2026-06-17

Trustworthy Self-Composable Big-Data-as-a-Service: An LLM-Orchestrated Multi-Agent Framework for Automated Data Engineering, AutoML, MLOps Deployment, and Drift-Aware Lifecycle Optimization

arXiv:2606.17915v1 Announce Type: cross Abstract: Big-Data-as-a-Service (BDaaS) platforms require re liable automation across data ingestion, cleaning, feature engi neering, model development, deployment, and post-deployment monitoring. However, existing LLM-based data science agents and AutoML systems mainly focus on isolated workflow stages, leaving limited support for lifecycle-level orchestration, artifact governance, human oversight, and drift-aware adaptation. This paper proposes a trustworthy self-composable BDaaS frame work based on LLM-orchestrated multi-agent collaboration. The proposed architecture decomposes the BDaaS lifecycle into specialized agents for data ingestion, data cleaning, feature engineering, AutoML training, model evaluation, MLOps de ployment, monitoring, and drift detection. A central LLM or chestration layer coordinates agent execution, validates interme diate outputs, manages workflow context, and enables dynamic workflow composition. The framework also incorporates shared artifact governance, reproducibility support, human-in-the-loop checkpoints, and drift-aware feedback loops. A prototype-based evaluation is conducted using controlled tabular benchmark datasets with missing values, categorical variables, outliers, class imbalance, and simulated covariate drift. Compared with manual ML, AutoML-only, and single-agent LLM baselines, the pro posed multi-agent BDaaS pipeline achieves competitive predictive performance while improving lifecycle-level reliability, including workflow completion, artifact traceability, deployment readiness, reproducibility, and drift recovery. The results suggest that LLM-orchestrated multi-agent systems can extend conventional AutoML toward trustworthy, adaptive, and production-oriented BDaaS lifecycle automation.

13.
arXiv (CS.CV) 2026-06-17

RAVA: Retrieval-Augmented Viewpoint Alignment for Subject-Driven Image Generation

Reference-driven image generation has made rapid progress on identity preservation, but reliable viewpoint control across different subjects remains poorly understood. The difficulty is not merely generating a new image of the target subject: the model must infer the implicit viewpoint of one subject and transfer it to another subject using only image-level evidence, without camera poses, depth, or ray-based conditions. In this setting, existing generators conditioned on multiple image references often rely on spurious semantic correlations, which lead to viewpoint drift, part-level structural mismatches, and missing or unsupported target-specific content. We formulate this challenge as cross-subject viewpoint alignment and propose RAVA, a retrieval-augmented framework that supplies explicit geometric evidence before generation. RAVA first learns a cross-instance viewpoint embedding that retrieves target-subject images aligned with the anchor viewpoint, then applies a LogDet-based subset selection strategy to retain a compact reference set that is both view-consistent and structurally complementary. The selected references are finally consumed by a fine-tuned multi-reference image generator. Experiments show that generic semantic embeddings are nearly random for this task, while the proposed retriever substantially improves viewpoint retrieval quality. On cross-subject generation, RAVA consistently outperforms zero-shot baselines and stronger retrieval alternatives under the same generation backbone. These results indicate that cross-subject viewpoint alignment benefits from retrieval-augmented geometric grounding rather than relying on end-to-end generation alone.

14.
bioRxiv (Bioinfo) 2026-06-11

GeroQubit: a lightweight, honesty-first de-novo design platform for geroscience-native small molecules with calibrated uncertainty

作者:

Computational molecule generation has outpaced its own credibility. We present GeroQubit, a GPU-free de-novo design platform that organizes candidates along a target x tissue x hallmark model and reports every signal alongside its measured baseline. We treat our tissue aging-signature readout as a mechanistic structural prior that we explicitly disclose is not validated against lifespan, and we surface efficacy only through a structure-to-lifespan k-NN whose weak but real signal (leave-one-out rho ~ 0.145) is wrapped in empirically-calibrated conformal intervals (90% target, 90.3% measured coverage). On a held-out retrospective recovery of ~1,940 ChEMBL binders against decoys, the score reaches ROC-AUC 0.945 with ~20x enrichment at 1% (BEDROC 0.91) and survives a scaffold-disjoint split - yet we report that it collapses to near-random (AUC 0.62) on genuinely novel chemotypes. Molecules are assembled reaction-first, so every candidate carries a verified synthetic route and atom-level synthon provenance; ADMET is handled as a multi-objective Pareto problem. We frame the disclosed weak signals and the hard-case failures not as flaws but as the honest, decision-useful output the field's own critics demand.

15.
medRxiv (Medicine) 2026-06-12

The Clinical Characteristics and mortality outcomes of Atrial fibrillation complicating Heart failure with reduced ejection fraction: A prospective study from South Africa

Background: A growing burden of cardiovascular risk factors has raised cardiovascular disease-related mortality in Sub-Saharan Africa (SSA), driving higher prevalence of heart failure with reduced ejection fraction (HFrEF) and its complication with atrial fibrillation (AF). No prospective study has examined AF's clinical impact on HFrEF in SSA. Aim: To determine AF prevalence in HFrEF, describe HFrEF-AF clinical characteristics, and determine AF's impact on mortality. Methods: In this prospective observational study at a tertiary hospital in Johannesburg, 136 HFrEF patients were enrolled and categorised as HFrEF- SR (sinus rhythm) or HFrEF-AF. Baseline clinical characteristics and biochemistry were recorded. Comprehensive echocardiography including left atrial strain by 2D speckle-tracking was performed. Median follow-up was 30.6 months. Results: AF was present in 28 patients (21%). The mean age was 58.7 {+/-} 14.9 years (52.9% male) and differed between groups (p < 0.001). Hypertensive heart disease was the leading cause of HFrEF (36%). Compared with SR, HFrEF-AF patients had poorer health status (KCCQ 27 [16-43] vs 45 [32-60], p < 0.001) and lower left atrial strain (26.2 {+/-} 11.3%, p < 0.001). Guideline-directed medical therapy was suboptimal in the AF group: anticoagulation use was higher than SR (60% vs 9.5%, p < 0.001) but overall inadequate; HFrEF-AF patients received lower median doses of carvedilol (15.6 mg vs 25 mg, p = 0.002) and enalapril (10 mg vs 20 mg, p = 0.004), and fewer received spironolactone (50% vs 75.3%, p = 0.013). Survival was significantly lower in HFrEF-AF (0.41 [0.22-0.61]) versus SR (0.73 [0.61-0.82], p < 0.001). Independent predictors of mortality included prior stroke, lower TAPSE and KCCQ, and higher E/e' and heart rate. Conclusion: AF is common among HFrEF patients in this SSA cohort (though lower than in high-income countries) and associates with worse clinical status, suboptimal therapy, and higher mortality.

16.
arXiv (CS.CV) 2026-06-12

Allure of Craquelure: A Variational-Generative Approach to Crack Detection in Paintings

Recent advances in imaging technologies, deep learning and numerical performance have enabled non-invasive detailed analysis of artworks, supporting their documentation and conservation. In particular, automated detection of craquelure in digitized paintings is crucial for assessing degradation and guiding restoration, yet remains challenging due to the possibly complex scenery and the visual similarity between cracks and crack-like artistic features such as brush strokes or hair. We propose a hybrid approach that models crack detection as an inverse problem, decomposing an observed image into a crack-free painting and a crack component. A deep generative model is employed as powerful prior for the underlying artwork, while crack structures are captured using a Mumford–Shah-type variational functional together with a crack prior. Joint optimization yields a pixel-level map of crack localizations in the painting.

17.
arXiv (quant-ph) 2026-06-17

Closest Accessible Symmetry reduction: a tool for Hamiltonian interpolation analysis

arXiv:2606.18161v1 Announce Type: new Abstract: We introduce a framework for analysing the spectrum of Hamiltonian interpolations without heavily relying on discretising the interpolation parameter. The method is based on the concept of accessible symmetries: a problem-class-dependent family of certifiable reflections that induce bipartitions of the Hilbert space. At each step, the interpolation Hamiltonian is projected onto the sectors of the accessible symmetry that is closest to being satisfied, yielding a hierarchy of weakly coupled pseudo-eigenspaces together with explicit residual couplings between them. We show that this representation captures qualitative signatures of quantum phase transitions, provides estimates of their location, and offers insights into their nature. The quality of the approximation is controlled by the compatibility between the accessible symmetry family and the problem instance. Although motivated in spirit by adiabatic quantum computation, our approach applies more broadly to the study of Hamiltonian phase diagrams, providing a new perspective on the spectral reorganisation of many-body quantum systems.

18.
arXiv (CS.LG) 2026-06-15

Traditional machine learning vs. deep learning from dynamic graph representations of proteins' 3D folds in the task of protein structure classification

arXiv:2605.29228v2 Announce Type: replace Abstract: Protein structure classification (PSC) uses supervised learning to predict a protein's CATH/SCOP(e) class from the protein's sequence or 3D structural feature(s). We already modeled 3D structures as (static) protein structure networks (PSNs), demonstrating the competitiveness of PSN-based features to sequence or direct (i.e. non-network) 3D structural features in the PSC task. More recently, we demonstrated the power of features extracted from dynamic PSNs over features extracted from static PSNs (and thus by transitivity over sequence and direct 3D structural features) in the same task. That dynamic PSN approach used traditional machine learning (ML), combining manual (pre-engineered) features with an off-the-shelf classifier. Here, we evaluate whether automatic deep learning (DL) from the dynamic PSNs yields improvements. Our evaluation on 72 datasets spanning ~44,000 CATH- or SCOPe-labeled dynamic PSNs reveals that in terms of PSC accuracy, traditional ML and DL are (close to) tied for a large majority of the datasets, while DL is on average 10+ times slower. We are the first to evaluate traditional ML vs. DL in the dynamic PSN-based PSC task.

19.
arXiv (CS.AI) 2026-06-15

Thinking Outside the [Chat]Box: Bridging Computer Science and Industrial Design for Cognitive-Inclusive Generative AI

arXiv:2606.14306v1 Announce Type: cross Abstract: Current Generative AI (GenAI) interfaces remain largely constrained to chatbox interaction, which can impose high cognitive demands on users and create substantial barriers for people with intellectual disabilities (ID), including prompt formulation difficulties, response overload, and limited mechanisms to assess information reliability. To explore alternative interaction models for cognitive accessibility, we conducted a cross-disciplinary co-design challenge in which two student cohorts (Computer Science and Industrial Design) developed interface concepts from the same set of functional requirements (e.g., prompt scaffolding, structured output, GUI-based refinement, transparency, and personalization). Comparing the resulting proposals reveals both convergence on foundational requirements (notably initial calibration, proactive prompting, and direct manipulation of response fragments) and complementary contributions that outline a multi-layered support system. Computer Science teams primarily produced structural scaffolding, emphasizing predictability, navigability, and trust through mechanisms such as reliability indicators, explicit sources, and context management for long conversations. Industrial Design teams emphasized experiential scaffolding, focusing on pacing, attention guidance, multimodality, and proactive agency, including step-by-step response flows, focus modes, and assistant-like integrations. We synthesize these findings into a dual-layer scaffolding framework that expands the design space for cognitively accessible GenAI interaction beyond chat-centric models and motivates future work on expert refinement, technical feasibility, and empirical validation with users with ID.

20.
arXiv (CS.LG) 2026-06-11

Bernstein-Schur Kernels: Random Features by Sketched Modulation and Radial Randomization

arXiv:2606.11255v1 Announce Type: new Abstract: Bernstein–Schur kernels are products of a finite-feature kernel (one with an explicit finite-dimensional feature map) and a completely monotone shift-invariant kernel: nonstationary kernels that fall between the shift-invariant and dot-product templates random features usually exploit, so in general neither Bochner sampling nor polynomial sketching applies to the full kernel directly. We give one random-feature construction for the whole class that randomizes both factors: it sketches the finite modulation and randomizes the completely monotone radial factor, sampling the latter's one-dimensional Bernstein–Widder scale and then applying Gaussian random Fourier features (whose frequency is still $d$-dimensional). The feature dimension is then $Dm$, set by the sketch size $m$ and the radial-draw count $D$, free of the $O(d^2)$ size of the exact modulation feature. Keeping the modulation \emph{exact is the analyzable limit ($m\to\infty$): there we prove unbiasedness, an exact variance for the recommended flat estimator, an expected matrix-Bernstein operator-norm bound (with a matching high-probability tail) controlled by the top eigenvalues of the kernel and modulation Gram matrices together with an intrinsic dimension rather than the crude $N\max_{ij}$ entrywise route, and a deterministic relative-spectral kernel-ridge stability result. By conditioning on the sketch, the doubly-randomized estimator inherits the same intrinsic-dimension operator-norm guarantee plus a single additive sketch term, tunable by $m$ independently of $D$. The motivating instance is the biased $yat$-kernel $k_{yat,b}(w,x)=(w^\top x+b)^2/(\|w-x\|^2+\varepsilon)$, $b\ge0$, whose family span contains the inverse-multiquadric kernel by finite differences in $b$; for it the radial mixture is the IMQ spectral sampler, and one frequency per scale is variance-optimal at a fixed radial-feature budget.

21.
Nature (Science) 2026-06-10

In situ nanocrystal confinement for efficient blue perovskite LEDs

Metal halide perovskites have emerged as promising semiconductors for light-emitting diodes (LEDs) owing to their excellent luminescence properties1. However, their performance remains limited, primarily owing to the inherent contradiction between ‘high crystallinity’ and ‘small size’ in the in situ synthesis of perovskite nanocrystals on substrates. Here we report efficient blue perovskite LEDs (PeLEDs) achieved via in situ polymerization-driven nanocrystal confinement to synthesize perovskite films composed of high-quality nanocrystals. The in situ-formed polymer network imposes nanoscale spatial constraints during perovskite nanocrystal growth, enabling nanocrystals with small sizes and a high photoluminescence quantum yield of 83%. Furthermore, polymerizable monomers with sufficient coordination sites allow a prolonged lattice rearrangement of perovskite clusters, promoting the crystallinity of the nanocrystals. The synthesized perovskite nanocrystals are utilized in the fabrication of PeLEDs, resulting in an external quantum efficiency of 21.8% at 491 nm, which is among the highest performances in blue PeLEDs. This work simultaneously controls the thermal dynamics of perovskite crystallization and organic ligand reactions, which helps to advance understanding of the effect of ligand engineering on nanocrystal synthesis, benefiting the development of efficient PeLEDs and other optoelectronic technologies. Efficient blue perovskite light-emitting diodes with an external quantum efficiency of 21.8% are achieved through in situ polymerization-driven nanocrystal confinement.

22.
arXiv (CS.LG) 2026-06-17

OmniPlan: An Adaptive Framework for Timely and Near-Optimal Network Planning Optimization

arXiv:2606.18105v1 Announce Type: cross Abstract: Network planning optimization is a fundamental problem across diverse domains, including transportation systems, communication networks, and power grids. It requires simultaneous optimization of multiple competing objectives under complex constraints. Existing network planning optimization frameworks rely on mixed integer programming (MIP) solvers, heuristics, and deep reinforcement learning (DRL) models to compute planning decisions. However, they lack effective adaptability to diverse and dynamic user intents, thus leading to the trade-off between execution time and optimality. In this paper, we propose OmniPlan, an adaptive framework that achieves both timeliness and near-optimality in network planning optimization. To achieve the adaptability lacking in existing solutions, OmniPlan employs a large language model (LLM)-based interpreter to convert heterogeneous natural-language intents into a unified and quantifiable user-preference vector. Then it employs a mixture-of-experts architecture that integrates MIP solvers, heuristics, and DRL models as specialized experts, where OmniPlan adapts to diverse intents by dynamically selecting timely and near-optimal experts. Finally, it incorporates a DRL-based expert configuration module that fine-tunes optimization objective weights to align planning decisions with user-specific preferences. We evaluate OmniPlan with a representative real-world workload, i.e., distributed machine learning (ML), where we leverage OmniPlan to offload a wide spectrum of ML inference tasks, e.g., decision trees, SVM, naive Bayes, XGBoost, and random forests, onto a network of hardware devices. Our experiments on a real-world testbed indicate that OmniPlan achieves near-optimal and low-execution-time offloading for real-world ML inference tasks, reducing latency by up to 97.8\% and network device resource consumption by up to 11.5\%.

23.
arXiv (CS.CV) 2026-06-12

Edit the Bits, Diff the Codes: Bitwise Residual Editing for Visual Autoregressive Models

Text-guided image editing with visual autoregressive (VAR) generators requires controlling both what the model samples and where the sampled change is written back into the image code. Existing VAR editors mainly operate on token streams, features, or flat next-token logits, leaving two native structures of bitwise-residual VAR models underused: the per-bit Bernoulli prediction head and the additive multi-scale residual code field from which the image is assembled. We propose BitResEdit, a training-free editor for bitwise-residual VAR generators such as Infinity. BitEdit performs source-negative guidance by tilting the post-CFG per-bit log-odds along a source–target contrast computed on a shared edited prefix, then projects each update into a closed-form Bernoulli-KL trust region around the clean CFG sampler. ResEdit converts the sampled bits into per-scale continuous-code residuals, gates them with a localization mask, and re-injects them through the generator's native sum-of-scales. Together they couple decision-time bit guidance with combination-time code composition, so masked-out latent features are preserved exactly by code arithmetic while localized, scale-aware edits are applied inside the target region. On PIE-Bench with Infinity-2B, BitResEdit attains the strongest text alignment among same-backbone VAR editors, improving CLIP on the edited region by +1.07 over the strongest prior editor while keeping background preservation competitive with it. Ablations show BitEdit and ResEdit play complementary roles in target alignment and background preservation.

24.
arXiv (CS.CV) 2026-06-16

VinQA: Visual Elements Interleaved Long-form Answer Generation for Real-World Multimodal Document QA

Real-world documents combine text with tables, charts, photographs, and diagrams arranged in diverse layouts, yet existing research on multimodal large language models (MLLMs) for document QA predominantly produces text-only responses, underutilizing these visual elements. We introduce VinQA, a dataset for long-form answer generation where cited visual elements are explicitly interleaved with their supporting text and grounded in relevant document pages. To support this task, we study two encoding methods for feeding raw document page images into an MLLM, along with their visual-element citation mechanisms: (1) Page Encoding, which directly encodes full-page images with bounding boxes of visual elements and treats these boxed regions as citable units; and (2) Modality Encoding, which parses each page to extract text and crop visual elements, encodes them separately, and uses these cropped elements as citable units. In our experiments, we propose M-GroSE, a multimodal evaluation framework extending GroUSE to assess answers along four dimensions: completeness, answer relevancy, faithfulness, and unanswerability. We additionally report Visual Source F1 to directly measure visual citation accuracy. Although proprietary frontier models still achieve the best overall scores on the VinQA test split, fine-tuning open Qwen2.5-VL models on the training split substantially improves their performance and narrows this gap. Modality Encoding is initially more robust for complex documents with long text, many visual elements, and diverse citation requirements. After training on VinQA, however, Page Encoding reaches a comparable level, competing effectively even without the explicit parsing used in Modality Encoding. Finally, Visual G-Eval, an MLLM-based judge, confirms that fine-tuned models insert visual elements at semantically appropriate positions with faithful supporting text.

25.
arXiv (CS.CV) 2026-06-18

SpectralDiT: Timestep-Conditioned Spectral Residual Correction for Flow-Matching DiTs

作者:

We propose SpectralDiT, a lightweight modification to flow-matching Diffusion Transformers that adds timestep-conditioned spectral correction to the MLP residual branch. The module decomposes each residual update into low- and high-frequency components on the patch-token grid, then learns a zero-initialized additive gate so the model initially matches the baseline DiT. On CIFAR-10 pixel-space generation, SpectralDiT improves FID from 20.78 to 19.71 at patch size 1 and reduces the radial Fourier spectrum gap. Furthermore, we scale our method to latent diffusion on ImageNet-100. With 0.6% additional theoretical FLOPs and 1.36% additional parameters, SpectralDiT improves latent flow-matching, achieving an 8.7% relative FID reduction under classifier-free guidance (CFG 2.0). All reported results are averaged over five seeds. Ablations and gate visualizations on CIFAR-10 reveal stable block-specific spectral correction patterns.