Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-16

Self-Supervised Learning of Iterative Solvers for Constrained Optimization

arXiv:2409.08066v3 Announce Type: replace Abstract: The real-time solution of parametric optimization problems is critical for applications that demand high accuracy under tight real-time constraints, such as model predictive control. To this end, this work presents a learning-based iterative solver for constrained optimization, comprising a neural network predictor that generates initial primal-dual solution estimates, followed by a learned iterative solver that refines these estimates to reach high accuracy. We introduce a novel loss function based on Karush-Kuhn-Tucker (KKT) optimality conditions, enabling fully self-supervised training without pre-solved optimizer solutions. Theoretical guarantees ensure that the training loss function attains minima exclusively at KKT points. A convexification procedure enables application to nonconvex problems while preserving these guarantees. Experiments on two nonconvex case studies demonstrate speedups of up to one order of magnitude compared to state-of-the-art solvers such as IPOPT, while achieving orders of magnitude higher accuracy than competing learning-based approaches.

02.
arXiv (CS.AI) 2026-06-15

Q-Net: Queue Length Estimation via Kalman-based Neural Networks

arXiv:2509.24725v4 Announce Type: replace-cross Abstract: Estimating queue lengths at signalized intersections is a long-standing challenge in traffic management. Partial observability of vehicle flows complicates this task despite the availability of two privacy-preserving data sources: (i) aggregated vehicle counts from loop detectors near stop lines, and (ii) aggregated floating car data (aFCD) that provide segment-wise average speed measurements. However, how to integrate these sources with differing spatial and temporal resolutions for queue length estimation is rather unclear. Addressing this question, we present Q-Net: a queue estimation framework built upon a state-space formulation. This design addresses key challenges in queue modeling, such as violations of traffic conservation assumptions. Q-Net follows the Kalman predict-update structure and maintains physical interpretability in both the state evolution and measurement models. Q-Net uses an AI-augmented Kalman filter to learn time-varying gain dynamics from data. The framework supports real-time implementation and improves spatial transferability by grouping aFCD measurements into fixed-size local groups, making the number of learnable parameters independent of section length. Evaluations on urban main roads in Rotterdam, the Netherlands, show that Q-Net outperforms baseline methods, tracks queue formation and dissipation accurately, and mitigates aFCD-induced delays. By combining data efficiency, interpretability, real-time applicability, and spatial transferability, Q-Net makes accurate queue length estimation possible without costly sensing infrastructure like cameras or radar.

03.
arXiv (math.PR) 2026-06-16

Small moments of the sensitivity of polynomial threshold functions

arXiv:2606.16004v1 Announce Type: new Abstract: In the first version of Chang, Slote, Volberg, and Zhang's paper [BSA_of_PTF], the authors modify a nice recursive approach due to Kane in [Correct_exponent_for_AS] where he bounded the average sensitivity of polynomial threshold functions. In [BSA_of_PTF] Kane's argument was adopted to estimate the boolean surface area of polynomial threshold function. The bridge is a combinatorial averaging lemma considering all balanced partitions. The lemma serves as a substitute for an additive property of average sensitivity. With the lemma, one can apply a Kane-type algorithm to derive a recurrence. Solving the recurrence then gives an upper bound of $e^{C_d \sqrt{\log n}}$ for the boolean surface area. In the second version of the same paper, the authors derive a polylog upper bound for BSA of PTFs. The difference is that they use a tail estimate for the sensitivity function. With the help of a polynomial restriction lemma in [poly_restriction] they sharpen the upper bound. It is noteworthy that when applying the polynomial restriction, each coordinate is put into each part independently with equal probability. As a result, a partition does not necessarily have equal-size blocks. In other words, it may not be balanced. In this note, we first investigate the effect of different partitioning. Second, we use the recursive method in the first version to derive a polylog upper bound for $\mathbb E[s(x)^{\eta}]$ where $\eta < 1/2$. It is interesting to note the phase transition that happens at $\eta=1/2$ in both versions of the proof (but in a completely different form). Section [PhaseTr-s] treats that.

04.
arXiv (CS.CV) 2026-06-16

All Eyes on the Workflow: Automated and Efficient Event Discovery from Video Streams

Disciplines such as business process management and process mining aid organizations by discovering insights about processes on the basis of recorded event data. However, an obstacle to process analysis is data multi-modality: for instance, data in video form are not directly interpretable as events. Existing approaches rely on a dictionary of activity label as input, cannot provide frame-by-frame labeling explanations, or rely on superseded computer vision techniques. In this work, we present SnapLog, an approach to extract event data from videos by converting frames to feature vectors using image embeddings and performing temporal segmentation through frame-wise similarity matrices. A generalized few-shot classification is then used to assign labels to the video segments, yielding labeled, timestamped sub-sequences of frames that are interpretable as events. Conventional process mining techniques can be used to analyze the resulting data. We show that our approach produces logs that accurately reflect the process in the videos.

05.
arXiv (CS.CL) 2026-06-16

ACCORD: Action-Conditioned Contextual Grounding for Language Agents

User instructions are often underspecified because humans rely on implicit assumptions about the surrounding environment. For large language model (LLM) agents operating in information-rich digital and physical environments, these assumptions cannot be inferred from the instruction alone; they must be recovered from the current state of tools, data, interfaces, and observations. Effective execution therefore requires agents to identify missing context, ground it in observed evidence, and carry it forward into subsequent actions. We show that current agents often fail to do so. They act from assumed rather than observed specifics, overlook information they could have gathered, and fail to incorporate evidence that has already been returned. Building on this insight, we propose ACCORD (Action-Conditioned Contextual Grounding), a simple and effective agent framework for adaptive grounding. Before each action, ACCORD actively probes the environment for missing information and integrates relevant context from the agent's trajectory that would otherwise be overlooked. Requiring no additional training or task-success signals, ACCORD improves task-goal completion on AppWorld by up to +20.6 points with GPT-5-mini, from 42.0% to 62.6%, compared to strong baselines. These gains persist with a substantially stronger base model (+10.8 with Claude-4.5-sonnet), an open-weight model (+10.1 with Qwen3.5-27B-FP8), and on the embodied AlfWorld benchmark (+7.4 success rate with GPT-5-mini).

06.
arXiv (CS.CV) 2026-06-19

Fast Human Attention Prediction for Fixation-guided Active Perception in Autonomous Navigation

Human visual attention relies on structured scanpaths to efficiently process scenes, yet instilling this behavior into robot autonomy is in its infancy and hindered by the high,computational costs of existing predictive models. To address this, we introduce GazeLNN, a computationally lightweight,scanpath prediction model that leverages Liquid Neural Networks as its recurrent engine and employs MobileNetV3 for feature extraction. Operating auto-regressively, the architecture predicts sequential fixation heatmaps conditioned on the current visual stimulus and fixation history. Despite requiring only 0.61 GFLOPs, GazeLNN achieves state-of-the-art performance on the MIT Low Resolution dataset achieving 0.47 ScanMatch score. It outperforms existing recurrent baselines across diverse evaluation metrics, while reducing computational costs by 99.40% and accelerating inference by up to six times. To investigate the role of human attention modeling in robot autonomy and demonstrate the practical utility of this highly efficient architecture, we integrate GazeLNN into an active camera-robot control policy trained via Reinforcement Learning. This integration enables human-fixation-guided perception during autonomous navigation, validated through successful real-world deployments on an aerial robot.

07.
arXiv (CS.CV) 2026-06-18

MolmoMotion: Forecasting Point Trajectories in 3D with Language Instruction

Motion forecasting is central to visual intelligence: agents must anticipate how objects will move in order to plan actions, reason about physical interactions, and synthesize realistic futures. We argue that 3D points in world coordinates provide a general representation that is class-agnostic, view-stable, compact, and directly useful for downstream tasks. We formalize the task of goal-conditioned 3D point motion forecasting: given a short visual history, a set of 3D query points on an object of interest, and a language description of the intended goal, the model predicts the future 3D trajectory of each point. We introduce a full stack to study this task at scale: (1) MolmoMotion-1M is a large corpus of action-described, object-grounded 3D point trajectories annotated from 1.16M unconstrained videos; (2) PointMotionBench is a human-verified benchmark spanning 111 object categories and 61 motion types; and (3) MolmoMotion is a general motion forecasting model that supports both autoregressive coordinate prediction and flow-matching-based trajectory generation. MolmoMotion accurately predicts diverse motion patterns with different language instructions, and significantly outperforms existing motion prediction baselines on PointMotionBench. Finally, we show that the learned 3D motion prior transfers well to downstream applications: it improves training efficiency and generalization for robot manipulation, and its predicted trajectories provide effective motion guidance for generative models to synthesize videos with more realistic object motion.

08.
arXiv (CS.LG) 2026-06-24

You Don't Need to Run Every Eval

arXiv:2606.24020v1 Announce Type: new Abstract: A modern model release reports scores on 40+ benchmarks and the same evaluations were run many more times before it: to track training progress, compare design choices, and select the checkpoint for the release. But do we need to run every eval? We compile a public score matrix of 84 frontier models on 133 benchmarks (2,604 cells, 23.3% filled) and find it is approximately rank-2: a model's scores across all 133 benchmarks are largely determined by just two numbers. We confirm this in two ways: scores hidden from the matrix are best recovered using two factors, and two factors already explain over 90% of the variation among models on the benchmarks they share. Building on this, we design BenchPress: a logit-space rank-2 matrix completion method that recovers held-out scores to within 4.6 points, and a confidence layer that says when each prediction can be trusted. Using BenchPress, we find a subset of five benchmarks {GPQA-D, HLE, Codeforces, MMLU-Pro, ARC-AGI-1} that can recover the rest of a model's public scorecard to within 3.93 points. For a tighter inference budget, a cheaper set {GPQA-D, MMLU-Pro, Aider Polyglot, MATH-500, AIME 2026} can predict a model's evals to within 4.55. We release the score matrix, the BenchPress code, and an interactive tool that predicts any model's score on any benchmark.

09.
arXiv (CS.LG) 2026-06-12

Quantum Reservoir Computing for Short-Term Power Load Forecasting in Resource-Constrained Energy Systems

arXiv:2606.12806v1 Announce Type: cross Abstract: Short-term load forecasting is essential for reliable energy management, but practical deployment on edge devices requires models that remain accurate under limited memory, finite measurement budgets, and hardware noise. This work proposes a hardware-efficient Quantum Reservoir Computing (QRC) framework for energy load forecasting, where a fixed quantum reservoir transforms temporal input windows into high-dimensional features and only a classical Elastic Net readout is trained. To reduce deployment cost, the trained readout is compressed using post-training fixed-point quantization at bit widths from 8 to 2 bits. The framework is evaluated on the Tetouan and Spain energy load datasets under exact statevector simulation, 512-shot finite sampling, and realistic hardware-noise models from IBM FakeTorino and IBM FakeMarrakesh. Results show that 6-bit readout precision preserves full-precision forecasting performance while reducing readout memory by 81.2%. Below this point, degradation becomes dataset dependent, with Tetouan showing stronger sensitivity and Spain degrading more gradually. Hardware-noise validation further shows that the trained readout transfers to noisy reservoir states without retraining. These findings support quantized QRC as a resource-aware forecasting approach for near-term quantum time-series applications.

10.
bioRxiv (Bioinfo) 2026-06-19

Perturbation Curve models continuous transcriptional response trajectories and improves prediction of genetic modulations

Single-cell CRISPR screens, Perturb-seq, have revolutionized functional genomics by revealing biological causality. However, although perturbation assignments are typically represented as discrete labels, the cell-level effective strength of perturbations is often continuous and diverse. Current analytical frameworks struggle to decouple the variability in perturbation strength from the diversity of downstream responses. Here, we present Perturbation Curve (PertCurve), a nonlinear, curve-based computational framework that models the trajectories of transcriptomic responses by explicitly incorporating diverse perturbation magnitudes and strengths. By ordering cells by perturbation strength, we demonstrate that PertCurve accurately recapitulates the response magnitudes and reveals the distinct modularity and asynchrony patterns of downstream gene behaviors. These patterns are categorized into archetypes, including proportional, sensitive, and threshold responses. By applying this framework across CRISPRi/a modalities, we identify universal response patterns in viral infection, apoptosis, and proliferation genes, and reveal previously overlooked context-specific regulatory features in cell differentiation. Finally, incorporating PertCurve into perturbation prediction models and evaluation metrics enhances predictive performance, delivering actionable insights for refining established models.

11.
arXiv (CS.AI) 2026-06-17

FllumaOne: A Code-Native Multimodal CAD Dataset with Executable Programs and Kernel-Validated Feature Histories

作者:

arXiv:2606.17696v1 Announce Type: new Abstract: Parametric computer-aided design records both final geometry and the ordered construction history that determines how a part can be edited. Datasets for editable CAD research should therefore expose modeling operations, parameters, and feature dependencies together with validated geometry. We introduce FllumaOne, a code-native multimodal CAD dataset whose models are generated by executable Python programs in Flluma, a Qt/C++ OpenCASCADE-based CAD system. Each sample aligns its program with a structured feature tree, a training-oriented intermediate representation, STEP geometry, a surface point cloud, natural-language descriptions, metadata, and eight canonical visible-edge renderings. The primary release, FllumaOne-100K, contains 100,000 accepted samples across four template-level complexity regimes. Programs are executed and retained only after kernel geometry, solid validity, and export checks; release reports also record modality completeness and split-level duplicate tests. A Qwen2.5-Coder-1.5B LoRA baseline trained on 80,000 samples achieves 99.98% Python syntax validity, 99.97% Flluma build success, and 99.14% STEP-export validity on the held-out 10,000-sample test split. For the 9,909 predictions converted to surface point clouds, the mean normalized Chamfer Distance is 0.002124. The dataset supports conditioned CAD reconstruction, executable program synthesis, feature-tree prediction, B-Rep analysis, retrieval, design completion, and editable reverse engineering.

12.
arXiv (CS.CV) 2026-06-24

Token-to-Token Alignment of Text Embeddings for Semantic Blending

In modern generative models, images are specified and controlled through text prompts. In practice, images are generated from sequences of tokens derived from these prompts. However, the space of token sequences lacks a consistent accessible structure: semantically similar images may correspond to sequences that differ in wording, ordering, and placement of concepts, while similar token sequences may encode very different semantics. This apparent lack of structure makes it difficult to perform smooth transitions in this space, hindering applications such as image blending and continuous control of edits. We argue that this limitation stems not from the absence of semantic structure, but from misalignment between representations. To address this misalignment, we introduce Token-to-Token alignment, a framework that establishes explicit semantic correspondence between tokens across prompts. Our approach transforms prompts into a structured representation in which semantically corresponding concepts are mapped to consistent positions across prompts, and then aligns their token embeddings based on semantic similarity. Concretely, the method consists of two stages: a structural alignment that rephrases prompts into a shared structured form, followed by an embedding-level alignment that matches token representations across prompts. With this alignment in place, simple linear interpolation becomes a meaningful operation, producing smooth and coherent semantic transitions and enabling applications such as blending and continuous editing. Our results show that text embedding spaces in text-to-image models implicitly encode a continuous semantic structure that becomes accessible once representations are properly aligned, suggesting that semantic control can be achieved by organizing existing representations rather than modifying the generative model.

13.
arXiv (CS.CL) 2026-06-17

ConSA: Controllable Sparsity in Hybrid Attention via Learnable Allocation

Hybrid architectures combining full attention (FA) and sliding-window attention (SWA) are a promising paradigm for efficient LLM inference. However, existing methods typically rely on hand-crafted rules or simple post-hoc heuristics for FA/SWA allocation and offer limited analysis of the attention behaviors underlying these designs. We propose Controllable Sparsity in Hybrid Attention (ConSA), a framework that learns optimal FA/SWA assignment under a user-specified sparsity target. ConSA employs L0 regularization to learn binary masks selecting between FA and SWA for each attention unit, while an augmented Lagrangian constraint enforces the target sparsity at either layer or KV-head granularity. We evaluate ConSA on two LLMs at the 0.6B and 1.7B scales. Learned allocations consistently outperform rule-based baselines, with KV-head-wise allocation yielding clear gains over layer-wise allocation. The learned patterns place SWA in the bottom layers and concentrate FA into contiguous middle-layer blocks, diverging from evenly interleaved patterns in rule-based methods. This structure persists across model scales, sparsity levels, and allocation granularities, revealing a fine-grained spectrum of intrinsic attention behaviors that underlies the learned allocation.

14.
arXiv (quant-ph) 2026-06-16

Temporal modulation as a resource: enhanced frequency estimation in continuous variable systems

arXiv:2606.15108v1 Announce Type: new Abstract: Frequency estimation, a cornerstone of quantum metrology, has been significantly enhanced by advanced quantum sensing strategies. However, most protocols rely either on static or time-independent encoding mechanisms, inherently limiting their achievable precision scaling, or on control strategies requiring changing the Hamiltonian and/or implementing feedback mechanisms. To overcome this, we investigate a simpler dynamical encoding protocol where the quantum oscillator is driven by a general continuous temporal frequency modulation $\Omega(t) = \omega_0 f(t)$. We analytically demonstrate that for a given modulation profile $f(t)$ and its corresponding time-integral $F(t)$, the quantum Fisher information (QFI) scales as $\mathcal{O}(F(t)^2)$. This enhancement stems from the fact that temporal encoding fundamentally alters the mechanism of dynamical phase accumulation. Crucially, when evaluated under the energy and evolution-time constraints, this framework reveals a genuine precision enhancement over the conventional time-independent baseline. By analyzing explicit polynomial and exponential modulations, we establish that arbitrary precision scaling can be deterministically engineered, with ultimate bounds that are asymptotically saturable via optimal homodyne detection. Our framework provides a universal paradigm for exploiting time-dependent quantum control in next-generation sensors.

15.
arXiv (math.PR) 2026-06-24

Statistical and Numerical Convergence in Stochastic Equilibrium

arXiv:2606.07469v2 Announce Type: replace-cross Abstract: This paper sets out the most general computational and econometric implications of the rigorous stochastic equilibrium theory from SELCKE (Staines (2024a)) arXiv:2312.16214. The analytical backbone is the discovery that the system converges geometrically to long-run equilibrium, at a rate given by the greater of the eigenvalue or inverse eigenvalue (from outside) closest to the unit circle and the maximum shock persistence. High-order shocks converge faster. I develop a simulation procedure to test, with asymptotic power, whether stochastic equilibrium exists for a particular model. The fundamental approximation result asserts that, whatever the order of expansion or loss function, the stochastic steady state delivers the most accurate perturbation solution. I also show that super-consistent parameter estimators $O(1/T)$ arise whenever second-order terms vanish. Besides Calvo, I study stochastic equilibrium in two alternative pricing models. Dynamics simplify considerably. I bound the time the impulse response peaks, by the maximum lag in the errors. This lends empirical support to Taylor contracts, although there are issues surrounding unit roots and the strong cost-channel. For menu costs, I demonstrate that the initial price distribution decays away super-exponentially, producing a system equivalent to Calvo with an endogenous reset probability. The impact of idiosyncratic disturbances appears as an additional wedge between actual and efficient output. Blow-up of the objective function at the boundary is proven, with the help of new distributional arguments, so the model meets existing eigenvalue existence conditions for the recursive equilibrium. Along the way, new light is shone on existing theoretical models and statistical procedures.

16.
arXiv (CS.CV) 2026-06-16

FrameOracle: Learning What to See and How Much to See in Videos

Vision-language models (VLMs) advance video understanding but operate under tight computational budgets, making performance dependent on selecting a small, high-quality subset of frames. Existing frame sampling strategies, such as uniform or fixed-budget selection, fail to adapt to variations in content density or task complexity. To address this, we present FrameOracle, a lightweight, plug-and-play module that predicts both (1) which frames are most relevant to a given query and (2) how many frames are needed. FrameOracle is trained via a curriculum that progresses from weak proxy signals, such as cross-modal similarity, to stronger supervision with FrameOracle-41K, the first large-scale VideoQA dataset with validated keyframe annotations specifying minimal sufficient frames per question. Extensive experiments across five VLMs and six benchmarks show that FrameOracle reduces 16-frame inputs to an average of 10.4 frames without accuracy loss. When starting from 64-frame candidates, it reduces inputs to 13.9 frames on average while improving accuracy by 1.5%, achieving state-of-the-art efficiency-accuracy trade-offs for scalable video understanding.

17.
arXiv (CS.CV) 2026-06-16

Bridging Information Asymmetry: A Hierarchical Framework for Blind Face Restoration with Reduced Uncertainty

Blind face restoration remains a persistent challenge due to the inherent ill-posedness of reconstructing holistic structures from severely constrained observations. Current generative paradigms, while capable of synthesizing realistic facial details, remain limited by the under-constrained nature of blind restoration, where severely degraded inputs can be mapped to plausible yet identity-inconsistent outputs. To address this issue, we present Pref-Restore, a hierarchical framework for BFR with reduced restoration uncertainty. Our design is organized around three complementary principles: (1) Semantic Information Augmentation, where an auto-regressive semantic branch converts image and text cues into structured tokens that provide a stable high-level anchor; (2) Texture-level Fidelity Alignment, where the diffusion generator is trained under this anchor to recover identity-relevant details; and (3) Fidelity-constrained Preference Optimization, where a face-aware reward refines the diffusion trajectory while controlling the quality–fidelity trade-off. Extensive experiments on synthetic and real-world benchmarks show that Pref-Restore achieves state-of-the-art performance, with stronger identity-sensitive fidelity and lower restoration uncertainty across repeated sampling. Systematic ablations further attribute these gains to the proposed hierarchical design, showing the necessity of staged training, the robustness and quality dependence of the text pathway, and the benefit of fidelity-constrained preference optimization.

18.
arXiv (CS.LG) 2026-06-19

Pose6DAug: Physically Plausible Multi-view Object Swapping for Robot Data Augmentation

arXiv:2606.20118v1 Announce Type: cross Abstract: Vision-language-action (VLA) policies have shown strong potential for general-purpose manipulation, yet they often fail on novel, out-of-distribution objects whose appearance or geometry deviates from the training distribution. The standard remedy is to collect multi-view teleoperation data for every failure case, but this scales poorly in both cost and time. We introduce Pose6DAug, a failure-driven data augmentation framework that turns a policy's own successful episodes into targeted demonstrations for its failure modes, without any new data collection. Our key insight is that each successful episode already encodes a physically valid action trajectory together with calibrated multi-view observations. By swapping only the manipulated object while preserving this trajectory, we obtain new and physically grounded demonstrations. However, naive 2D video editing breaks multi-view consistency and physical plausibility, particularly under heavy occlusion and egocentric viewpoints. Our method instead operates directly in 3D, anchoring the target object with an explicit mesh driven by a temporally coherent 6D pose trajectory, ensuring geometrically consistent renderings across all camera views. Fine-tuning a VLA on data augmented by our method improves success rates by 16.5% relative to the state-of-the-art baseline on novel objects, while preserving in-distribution performance. These results show that multi-view and physically consistent augmentation is a practical path to scalable VLA generalization.

19.
medRxiv (Medicine) 2026-06-17

Method comparisons for differentiation of Schizophrenia and Bipolar based on rs-fMRI Intrinsic and Functional Networks

Psychosis as a symptom manifests in schizophenia and bipolar disorder, two highly heterogeneous psychiatric illnesses with overlapping clinical manifestations. Resting-state functional Magnetic Resonance Imaging (rsfMRI), represents a promising tool for identifying objective biomarkers of functional brain alterations to aid differential diagnosis. In this work, we comparatively evaluate multiple rs-fMRI representations for differentiating schizophrenia and bipolar disorder using intrinsic connectivity network (ICN) temporal profiles and several functional network connectivity (FNC) approaches, including static, dynamic, and high-order connectivity analyses. The study was conducted on a cohort of 371 subjects with psychosis, while evaluation was performed using a separate held-out cohort of 315 subjects. We investigated convolutional neural network architectures applied to ICN temporal profiles, spectrograms, and scalograms, alongside classical machine learning models trained on connectivity-derived features. Across the evaluated approaches, ICN temporal profiles provided the most consistent discriminative performance, with a 1D convolutional neural network achieving the strongest overall results under the benchmark protocol. Among connectivity-based methods, static functional connectivity generally outperformed dynamic and high-order representations, suggesting that increased representational complexity did not necessarily translate into improved generalization. Although the obtained classification performance remained modest, the results highlight the challenges of robust psychosis differentiation using rs-fMRI while emphasizing the relative stability of low-order connectivity representations and temporal ICN features. These findings contribute to ongoing efforts toward reproducible and interpretable neuroimaging biomarkers for psychiatric disorders.

20.
arXiv (CS.CV) 2026-06-16

Random Erasing vs. Model Inversion: A Promising Defense or a False Hope?

Model Inversion (MI) attacks pose a significant privacy threat by reconstructing private training data from machine learning models. While existing defenses primarily concentrate on model-centric approaches, the impact of data on MI robustness remains largely unexplored. In this work, we explore Random Erasing (RE), a technique traditionally used for improving model generalization under occlusion, and uncover its surprising effectiveness as a defense against MI attacks. Specifically, our novel feature space analysis shows that models trained with RE-images introduce a significant discrepancy between the features of MI-reconstructed images and those of the private data. At the same time, features of private images remain distinct from other classes and well-separated from different classification regions. These effects collectively degrade MI reconstruction quality and attack accuracy while maintaining reasonable natural accuracy. Furthermore, we explore two critical properties of RE including Partial Erasure and Random Location. Partial Erasure prevents the model from observing entire objects during training. We find this has a significant impact on MI, which aims to reconstruct the entire objects. Random Location of erasure plays a crucial role in achieving a strong privacy-utility trade-off. Our findings highlight RE as a simple yet effective defense mechanism that can be easily integrated with existing privacy-preserving techniques. Extensive experiments across 37 setups demonstrate that our method achieves state-of-the-art (SOTA) performance in the privacy-utility trade-off. The results consistently demonstrate the superiority of our defense over existing methods across different MI attacks, network architectures, and attack configurations. For the first time, we achieve a significant degradation in attack accuracy without a decrease in utility for some configurations.

21.
arXiv (CS.LG) 2026-06-24

Asymptotic Signal Subspace Recovery in Softmax Attention Models

arXiv:2606.22406v2 Announce Type: replace Abstract: Attention mechanisms have demonstrated remarkable empirical success in identifying relevant information from large collections of tokens, yet the theoretical principles underlying this behavior remain poorly understood. We study a stylized softmax-attention model in which a query vector is learned by stochastic gradient ascent from a collection of informative and nuisance tokens. Exploiting the symmetry of the model, we derive a population objective and characterize the limiting ordinary differential equation governing the learning dynamics. Using tools from stochastic approximation and dynamical systems theory, we establish a rigorous connection between the stochastic learning algorithm and its deterministic limit. Our main result shows that, under suitable high-dimensional scaling assumptions and standard step-size conditions, the learned query converges almost surely to the one-dimensional signal subspace spanned by the latent informative direction. Equivalently, the query asymptotically recovers the latent signal up to the intrinsic sign ambiguity. These results provide a rigorous theoretical foundation for understanding attention mechanisms as signal extraction procedures in high-dimensional noisy environments and offer a dynamical-systems perspective on how attention discovers relevant information in the presence of substantial noise.

22.
arXiv (CS.CL) 2026-06-24

WAND: Windowed Attention and Knowledge Distillation for Efficient Autoregressive Text-to-Speech Models

Recent decoder-only autoregressive text-to-speech (AR-TTS) models produce high-fidelity speech, but their memory and compute costs scale quadratically with sequence length due to full self-attention. In this paper, we propose WAND, Windowed Attention and Knowledge Distillation, a framework that adapts pretrained AR-TTS models to operate with constant computational and memory complexity. WAND separates the attention mechanism into two: persistent global attention over conditioning tokens and local sliding-window attention over generated tokens. To stabilize fine-tuning, we employ a curriculum learning strategy that progressively tightens the attention window. We further utilize knowledge distillation from a full-attention teacher to recover high-fidelity synthesis quality with high data efficiency. Evaluated on three modern AR-TTS models, WAND preserves the original quality while achieving up to 66.2% KV cache memory reduction and length-invariant, near-constant per-step latency.

23.
arXiv (CS.CL) 2026-06-18

Low-resource Language Discrimination Towards Chinese Dialects with Transfer learning and Data Augmentation

Chinese dialects discrimination is a challenging natural language processing task due to scarce annotation resource. In this article, we develop a novel Chinese dialects discrimination framework with transfer learning and data augmentation (CDDTLDA) in order to overcome the shortage of resources. To be more specific, we first use a relatively larger Chinese dialects corpus to train a source-side automatic speech recognition (ASR) model. Then, we adopt a simple but effective data augmentation method (i.e., speed, pitch, and noise disturbance) to augment the target-side low-resource Chinese dialects, and fine-tune another target ASR model based on the previous source-side ASR model. Meanwhile, the potential common semantic features between source-side and target-side ASR models can be captured by using self-attention mechanism. Finally, we extract the hidden semantic representation in the target ASR model to conduct Chinese dialects discrimination. Our extensive experimental results demonstrate that our model significantly outperforms state-of-the-art methods on two benchmark Chinese dialects corpora.

24.
arXiv (CS.LG) 2026-06-16

Agent trajectories as programs: fingerprinting and programming coding-agent behavior

arXiv:2606.16988v1 Announce Type: cross Abstract: Benchmark scores tell you what an agent got right; they do not tell you how it got there. In this work, we introduce methods for comparing agents procedurally in different contexts, where the model, tasks, and approaches vary. We compare ten agents and find that they are identifiable by their behavioral habits, which we define as fingerprints: a probe over these procedural signatures attributes an unseen trajectory to the correct agent at 85.7% accuracy, controlling for leakage across tasks. We develop procedural representations for agent problem-solving procedures with an emergent vocabulary induction technique that is meant to be maximally compressive to avoid surface-level variation while being expressive enough to unveil the quirks of the models' patterns. We apply our framework to the software engineering evaluation dataset SWE-Bench to study the structural distinctness of agent trajectories and find that behavior is most similar between models from similar release periods and those that are distilled from one another (e.g., a distilled student model and its teacher have a Jensen-Shannon divergence of 0.25, about half the distance between other model pairs). As more models saturate evaluations, we believe that it will be important to probe model behavior along more holistic dimensions than success rates alone. We introduce ProcGrep, a library for auditing and evaluating agents for how they approach tasks at a procedural level given their traces in a top-down fashion. We believe this work has a range of applications to help developers work with and program coding agents, such as task-aware model routing, agent monitoring, and finer-grained cost analysis.

25.
arXiv (CS.CV) 2026-06-11

MB-Loc: Multi-planar Bird's-eye-view Localization in outdoor LiDAR scenes

Global LiDAR localization is a fundamental task for autonomous navigation systems. Recent methods perform Scene Coordinate Regression (SCR) and achieve superior accuracy over Absolute Pose Regression (APR) solutions by predicting dense 3D world coordinates. However, SCR approaches introduce two major bottlenecks: severe computational inefficiency from processing raw 3D geometries and significant performance degradation under varying sensor viewpoints. To address these limitations, we present MB-Loc, a lightweight and viewpoint-robust SCR framework. Instead of relying on heavy 3D convolutions, we project the input LiDAR scan into a 2.5D Multi-planar Bird's-Eye View (BEV) representation. By slicing the point-cloud along the Z-axis and mapping signed depths into discrete 2D planes, MB-Loc retains essential 3D geometric structures while exploiting the computational tractability of standard 2D CNNs. To handle the inherent sparsity of outdoor LiDAR, we introduce a KL-regularized latent bottleneck that explicitly models spatial uncertainty without injecting stochastic noise. Finally, to ensure rotation robustness, we apply 3D spatial augmentations prior to planar projection, forcing the network to implicitly learn viewpoint-invariant features. We perform extensive experiments on the publicly available NCLT dataset and demonstrate that our proposed method outperforms the current state-of-the-art. Operating at real-time inference speeds, MB-Loc significantly outperforms traditional 3D-SCR architectures in computational efficiency.