Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-18

Domain-Shift Aware Neural Networks for Unbalance Characterization in Rotating Systems

arXiv:2606.18882v1 Announce Type: cross Abstract: This work investigates the application of a domain-shift aware neural network for regression tasks aimed at estimating unbalance masses in rotating shafts under varying operating conditions. Experimental data were collected from a test rig in which a primary shaft, equipped with a flange carrying unbalanced masses, was driven at different rotational speeds, while a secondary shaft could be optionally activated to introduce domain discrepancy. The unbalance masses were positioned at a fixed radial distance, and the dynamic response of the system was recorded using triaxial accelerometers. The inverse problem of mass estimation is formulated within a domain adaptation framework, where the network is trained with a maximum mean discrepancy strategy to align feature representations across source and target distributions. The results demonstrate the effectiveness of explicitly addressing domain shift in improving prediction accuracy, especially when the system's physical behavior and sources of domain discrepancy are not fully known and fall outside the training conditions. These findings highlight the potential of domain-shift aware models for regression tasks in Structural Health Monitoring.

02.
Nature (Science) 2026-06-22

Will AI spark a scientific renaissance — or a diffuse monoculture?

作者:

Artificial intelligence’s ability to enrich science will depend not only on model capability, but also on whether researchers, reviewers and funders reward originality over speed. Artificial intelligence’s ability to enrich science will depend not only on model capability, but also on whether researchers, reviewers and funders reward originality over speed.

03.
arXiv (quant-ph) 2026-06-17

Cumulant expansion approach to the decay dynamics of interacting Mössbauer nuclei after strong impulsive excitation

arXiv:2510.00970v2 Announce Type: replace Abstract: Recent progress in accelerator-based x-ray sources brings higher excitation of ensembles of Mössbauer nuclei closer to experimental feasibility. Yet, a theoretical modeling of the decay dynamics of the interacting nuclear ensemble after the impulsive excitation is still an open challenge. Here, we derive a set of nonlinear equations which is capable of efficiently modeling large nuclear ensembles for arbitrary degrees of excitation. As key signature for higher excitation, we identify a non-linear time-evolution of the nuclear dipole phase, which can be tuned via the scattering geometry, and interferometrically be measured. Furthermore, we identify interesting finite-size effects in the nuclear dynamics of small ensembles. Our results provide important guidance for future experiments aiming at the non-linear excitation of nuclei. We further envision the exploration of finite size-effects in Mössbauer spectroscopy with highest spatial resolution, i.e., small sample volumes.

04.
arXiv (CS.AI) 2026-06-16

Phantoms and Disclosures: a Causal Framework for Auditing Synthetic Data

arXiv:2606.16952v1 Announce Type: cross Abstract: The rapid adoption of generative AI and Large Language Models (LLMs) has spurred interest in synthetic data as a privacy-preserving alternative to sensitive real-world datasets. However, generating high-utility synthetic data often carries the risk of memorizing and regurgitating private information from the training corpus. In this work, we present a customizable empirical auditing framework designed to detect and explain such data disclosures. Our framework introduces a mechanism to distinguish between "true disclosures"-where the system directly reproduces a user's information-and "phantom disclosures''-where the system incidentally generates a user's data. By partitioning input data into training and holdout sets and applying rigorous statistical hypothesis testing, we determine if observed disclosures are consistent with strict privacy baselines, such as zero-learning or specific Differential Privacy (DP) bounds. Crucially, this approach requires no model access, no canary insertion, and no reference model training -only the synthetic output and a held-out control set. We demonstrate that this framework effectively functions as a membership inference attack, providing empirical lower bounds on privacy leakage that are tighter than prior data-based auditing methods. Our approach is model-agnostic, applies to any synthetic data generation mechanism, and requires orders of magnitude fewer computational resources than shadow-model or canary-based alternatives.

05.
arXiv (quant-ph) 2026-06-12

SAT, MaxSAT, and SMT for QLDPC Distance Computation: A Large-Scale Empirical Study

arXiv:2606.12445v1 Announce Type: new Abstract: Exact distance computation for quantum LDPC (QLDPC) codes plays a central role in validating candidate fault-tolerant quantum-code constructions, yet the computational structure of this problem remains poorly understood. Despite substantial recent progress in QLDPC design, it remains unclear which algorithmic principles govern the practical scalability of exact distance computation and which classes of exact solvers are best suited to this task. To address these questions, we conduct a systematic study of SAT- and MaxSAT-based formulations for exact QLDPC distance computation across representative codes. We further compare these formulations against several established exact-distance approaches in order to better understand the algorithmic landscape of exact QLDPC distance computation. Our study challenges and refines several prevailing intuitions about exact QLDPC distance computation. First, despite the XOR-rich structure of QLDPC parity checks, practical scalability appears to be governed more by the handling of cardinality constraints and optimization bounds than by parity reasoning alone. Accordingly, XOR-aware reasoning does not provide a systematic advantage across our benchmark suite. Second, Brouwer-Zimmermann-style search, long regarded as the benchmark paradigm for exact distance computation in sparse classical codes, no longer maintains its traditional scalability advantage in the QLDPC setting. This finding challenges the expectation that techniques successful for sparse classical codes remain dominant for QLDPC codes. Third, substantial qualitative differences arise even among MaxSAT solvers themselves. Branch-and-bound MaxSAT significantly outperforms unsat-core-based MaxSAT on challenging benchmarks, demonstrating that solver architecture and optimization strategy play a decisive role in practical scalability.

06.
arXiv (CS.CV) 2026-06-11

ISAP-3D: Identity-Slot Aligned Part-Aware 3D Generation

Part-aware 3D generation aims to synthesize structured objects with semantically meaningful components, yet often suffers from structural ambiguity due to identity-layout entanglement. Existing methods either infer part identity and spatial layout implicitly, which can lead to unstable part allocation (e.g., slot swapping or part merging), or rely on strong layout conditions that are difficult to obtain in practice. We attribute this ambiguity to identity-slot permutation freedom: without explicit identity-slot alignment, the correspondence between semantic parts and generation slots is not identifiable during training, allowing multiple slot assignments to fit the same supervision and leading to inconsistent decomposition. Based on this insight, we argue that stable part-aware generation requires identity-aligned one-to-one slot modelling. We therefore propose an identity-slot aligned framework, ISAP-3D, which anchors each part with semantic identity tokens and performs identity-conditioned one-to-one layout prediction, followed by layout-conditioned geometry synthesis. Structured local-global conditioning maintains identity alignment across semantic, spatial, and geometric stages. We also construct a part-level dataset with a unified semantic protocol to enable learnable and consistent identity-slot alignment. Extensive experiments demonstrate improved structural stability, controllability, and robustness over state-of-the-art part-aware generation baselines.

07.
arXiv (CS.LG) 2026-06-19

Integrating national forest inventory, airborne lidar, and satellite imagery for wall-to-wall mapping of forest structure with computer vision

arXiv:2606.20291v1 Announce Type: new Abstract: Remote sensing is increasingly relied upon to deliver actionable science for forest and wildfire risk management across large landscapes. Wall-to-wall, annually updated maps are a persistent need for effective forest management. Many planning systems and data collections combine disparate data sources with different purposes, vintages, and prediction quality, which leads to confounding behavior in operational planning systems. We introduce the VibrantForests framework, developed and applied to map forest attributes and provide a coherent foundation for effective forest and wildfire planning. VibrantForests includes a satellite-based forest structure model trained on lidar-derived samples and applied across the contiguous United States to concurrently generate estimates of canopy cover, canopy height, aboveground live tree biomass, basal area, and quadratic mean diameter at 10-meter resolution. We demonstrate predictive capability spanning the full spectrum of forest conditions ranging from sparse-canopy/low-biomass to dense-canopy/high-biomass. Results show that our model extends the range at which saturation is commonly encountered in comparable passive-sensor models, and reduces regression-to-mean behavior that commonly produces overestimation of forest attributes in small/sparse conditions and underestimation in large/dense conditions. The VibrantForests framework addresses a key limitation in large-area forest and wildfire planning by delivering coherent wall-to-wall estimates of management-relevant attributes at annual cadence and 10m resolution.

08.
arXiv (quant-ph) 2026-06-17

Quantum Information Processing: A brief overview on Quantum Teleportation

作者:

arXiv:1604.00852v3 Announce Type: replace Abstract: Quantum Information Processing (QIP) exploits the principles of quantum mechanics to perform information storage, communication, and computation in ways that are fundamentally impossible within classical frameworks. This article presents a pedagogical overview of the mathematical foundations of quantum information theory, including qubits, Hilbert spaces, linear operators, quantum measurements, tensor products, density operators, and quantum entanglement. Building upon these concepts, we provide a detailed introduction to quantum teleportation, one of the most remarkable protocols in quantum communication. The discussion covers the no cloning theorem, the original teleportation protocol by Bennett et al., experimental realisations of quantum teleportation, and extensions involving probabilistic and multiqubit teleportation schemes. Particular emphasis is placed on the role of entanglement as a communication resource, together with the study of teleportation channels based on bipartite and multipartite quantum states. Various quantitative measures of entanglement, including concurrence, negativity, entanglement of formation, and relative entropy of entanglement, are reviewed alongside teleportation fidelity as a performance metric. Furthermore, the interplay between Bell nonlocality, mixed state entanglement, and teleportation efficiency is examined, followed by a survey of advanced developments such as controlled teleportation, bidirectional teleportation, cluster state teleportation, and recent advances in the Quantum 2.0 era. This review aims to provide students, researchers, and engineers with a coherent introduction to the theoretical foundations and practical significance of quantum teleportation in emerging quantum technologies.

09.
arXiv (CS.CL) 2026-06-11

On the Optimal Reasoning Length for RL-Trained Language Models

Reinforcement learning substantially improves reasoning in large language models, but it also tends to lengthen chain-of-thought outputs and increase computational cost. Although length-control methods have been proposed, the length-accuracy relationship they induce remains unclear. We train policies with several length-control methods on multiple base models in a controlled setup and find that, across both mathematical reasoning and code generation, accuracy is non-monotonic in output length, peaking at an intermediate value. Mode accuracy, however, continues to improve with length even in settings where sample accuracy plateaus or declines, indicating that the non-monotonic length-accuracy relationship is driven by dispersion around an increasingly correct center.

10.
arXiv (quant-ph) 2026-06-15

Efficient and simple Gibbs state preparation of the 2D toric code via duality to classical Ising chains

arXiv:2508.00126v2 Announce Type: replace Abstract: We introduce the notion of polynomial-depth duality transformations, which relates two sets of operator algebras through a conjugation by a poly-depth quantum circuit, and make use of this to construct efficient Gibbs samplers for a variety of interesting quantum Hamiltonians as they are poly-depth dual to classical Hamiltonians. This is for example the case for the 2D toric code, which is demonstrated to be poly-depth dual to two decoupled classical Ising spin chains for any system size, and we give evidence that such dualities hold for a wide class of stabilizer Hamiltonians. Additionally, we extend the above notion of duality to Lindbladians in order to show that mixing times and other quantities such as the spectral gap or the modified logarithmic Sobolev inequality are preserved under duality.

11.
arXiv (CS.CL) 2026-06-16

daVinci-kernel: Co-Evolving Skill Selection, Summarization, and Utilization via RL for GPU Kernel Optimization

GPU kernel optimization represents a paradigm where functional correctness is assumed and execution efficiency is the objective. We present daVinci-kernel, a reinforcement learning framework that couples skill discovery with skill exploitation through a dynamically evolving skill library. daVinci-kernel jointly trains three agents sharing one LLM backbone: a Skill Selection Agent that retrieves relevant techniques via BM25 and LLM reranking, a Policy Agent that generates multi-turn CUDA/Triton kernels conditioned on selected skills, and a Skill Summary Agent that distills successful rollouts into reusable skills. Candidate skills are added only after execution-based verification confirms reproducible speedups. All three agents share a single LLM backbone, are initialized via a structured SFT cold start on diversity-filtered data, and are then jointly optimized end-to-end with multi-turn REINFORCE and per-agent advantage estimation. On KernelBench, daVinci-kernel-14B achieves 37.2%, 70.6%, and 32.2% on Level 1, Level 2, and Level 3 under the Fast$_1$ threshold, outperforming the strongest prior RL-trained model, Dr.Kernel-14B.

12.
arXiv (CS.LG) 2026-06-15

Curvature-Informed Potential Energy Surface for Protein-Ligand Binding Affinity Prediction

arXiv:2606.14217v1 Announce Type: new Abstract: Accurate prediction of protein-ligand binding affinity is essential for structure-based drug discovery. Recent geometric deep learning methods have achieved promising performance by representing protein-ligand complexes as three-dimensional graphs. However, most existing approaches mainly rely on static interaction geometry from a single bound conformation, while neglecting molecular flexibility and binding-induced conformational changes. To address this limitation, we propose a curvature-informed potential energy surface (CPES) graph neural network for protein-ligand binding affinity prediction, which incorporates physics-informed curvature representations to model conformational flexibility. CPES first derives curvature spectral descriptors from the Hessian of the potential energy surface evaluated at equilibrium configurations, whose eigenvalues define the local principal curvatures of the potential energy surface. It then uses spectral cross-attention to compare the unbound ligand and protein with the bound complex, thereby capturing binding-induced changes in conformational dynamics. In parallel, hierarchical protein-ligand interaction representations are learned from static structural features through geometry-aware message passing, soft clustering, and bidirectional cross-attention. Finally, CPES fuses the curvature-informed dynamic representations with static interaction representations for affinity regression. Extensive evaluations on multiple benchmark datasets demonstrate that CPES achieves improved predictive performance and offers physical interpretability.

13.
medRxiv (Medicine) 2026-06-11

Conversational Speech for Respiratory Triage in Primary Care: A Pilot Study

作者:

Background. Respiratory complaints account for a substantial share of adult ambulatory care visits, and triaging them accurately has direct consequences for antibiotic stewardship and pathogen-specific therapy. Prior work has investigated voice as a triage signal, but that literature is dominated by single-condition detection from scripted speech in crowdsourced or controlled clinical settings and has not been evaluated at primary care scale on conversational ambient audio. Methods. A dataset of 514,377 ambient-recorded primary care visits from 379,225 adult patients at a US clinic network was used, with per-visit clinically assigned ICD-10 diagnosis codes and de-identified demographic and geographic metadata. Patient audio was extracted from each doctor-patient conversation, and spectral, voice quality, and prosodic features were computed. Eleven binary classification tasks were defined, aligned with a respiratory triage cascade (e.g., acute respiratory versus acute non-respiratory illness, and lower versus upper respiratory tract infection). An acoustic model (feed-forward network) was trained independently for each task using patient-stratified five-fold cross-validation and evaluated on a held-out test set. Each task's model was also compared against six non-acoustic baselines using a single demographic, geographic, or temporal variable. The 11 trained classifiers were composed into a hierarchical cascade and illustrated as case studies on selected patients. Results. Test-set AUC across the 11 tasks ranged from 0.602 (95% CI: 0.588-0.614) to 0.745 (95% CI: 0.742-0.748), with a mean expected calibration error of 0.018. Six of eleven binaries outperformed all confounder baselines. Four binaries showed median within-stratum AUC of 0.62-0.70 when the confounder was held fixed, indicating acoustic discrimination beyond what the confounder alone explains. The exception was the pneumonia versus non-pneumonia lower respiratory tract infection binary, which failed against the patient-city confounder baseline, plausibly reflecting a clinic-level difference in ICD-10 coding. Conclusion. Conversational primary care audio carries acoustic signal that discriminates clinically meaningful respiratory contrasts. Absolute performance is moderate, but the conditions are stricter than prior work: conversational speech and differential-diagnosis contrasts among sick patients. This pilot study is a baseline for voice-based clinical AI moving beyond sick-versus-healthy detection toward differential-diagnosis panels and a proof-of-concept for hierarchical reasoning.

14.
arXiv (CS.LG) 2026-06-17

Gradual Fine-Tuning for Flow Matching Models

arXiv:2601.22495v2 Announce Type: replace Abstract: Fine-tuning flow matching models is a central challenge in settings with limited data, evolving distributions, or computational constraints. While recent work has produced significant advances, particularly in the area of reward-based fine-tuning, current methods fail to demonstrate both theoretical correctness as well as strong empirical results in terms of stability, efficiency, and diversity preservation. In this work, we propose Gradual Fine-Tuning (GFT), a simple yet principled annealing-based framework for fine-tuning flow generative models when only samples from the target distribution are available. For stochastic flows, GFT defines a temperature-controlled sequence of intermediate objectives that smoothly interpolate between the pretrained and target drifts, provably approaching the true target as the temperature approaches zero. We analytically demonstrate that sample generation after GFT can be made substantially more efficient with the use of arbitrary (e.g., optimal transport) couplings, as well as by utilizing few-step inference methods. Empirically, GFT significantly improves convergence stability, while maintaining or improving generation quality, training speed, and generation diversity compared to other fine-tuning methods. Our results position GFT as a simple yet theoretically grounded and practically effective alternative for scalable adaptation of flow matching models under distribution shift.

15.
bioRxiv (Bioinfo) 2026-06-18

Robust Conditional Diffusion with Noisy Templates for Antibody Sequence-Structure Design

Antibodies specifically recognize antigens and play a central role in therapeutic discovery. Designing antibodies for a given antigen remains challenging because antigen-antibody complex data are limited, whereas the sequence and conformational spaces of complementarity-determining regions (CDRs) are large. Retrieved CDR templates from databases or candidate libraries can narrow the design space and improve controllability, but retrieval for novel antigens is often sparse and imperfect; treating retrieved templates as hard conditions can bias the denoising process and cause negative transfer. To address this problem, we propose Robust Conditional Diffusion with Noisy Templates for antibody sequence-structure design (NT-ABDiff), a joint diffusion framework that treats candidate CDR-only templates as optional and potentially unreliable conditions. NT-ABDiff uses reliability-aware template modulation to estimate the context-conditioned usefulness of each candidate and to adaptively reweight and fuse multiple templates during conditioning. We further train the model with mixed-quality and corrupted templates as conditional perturbation regularization, encouraging the denoiser to exploit informative templates while remaining stable when templates are uninformative. Experiments under controlled template shifts and a train-set retrieval evaluation show that NT-ABDiff improves CDR-H3 sequence recovery and structural accuracy over strong baselines, while retaining robustness to missing, mismatched, and corrupted templates. Under a stringent random-template CDR-H3 evaluation, NT-ABDiff improves amino-acid recovery (AAR) from 30.03% to 39.47% and reduces RMSD from 3.160 to 2.915A; with train-set retrieval candidates, it achieves 39.50% AAR and 2.76 {ring} A RMSD. Code, processed splits, {ring} configuration files, and evaluation scripts are available at https://github.com/ShiDeng7rz/NT-ABDiff.

16.
arXiv (CS.CV) 2026-06-12

Measurement-Calibrated Multi-Camera Fusion for Vision-Based Indoor Localization

Indoor vision-based localization systems are affected by detection noise, occlusions, and limited camera coverage, leading to uncertainty at multiple stages of the pipeline. While multi-camera data fusion is widely used to mitigate these issues, it is typically treated as a black-box component and evaluated solely end-to-end, obscuring its mechanistic contributions. To address this gap, this work investigates whether explicitly characterizing single-camera localization errors can be leveraged to calibrate and optimize multi-camera data fusion. We introduce a measurement-calibrated fusion approach that integrates component-wise error quantification, specifically isolating homography calibration, human detection, and motion tracking. A component-wise evaluation is conducted to quantify error contributions from homography calibration, human detection, and motion tracking. Experimental results show that data fusion improves localization accuracy compared to single-camera baselines. While measurement-calibrated fusion provides only limited improvement in absolute accuracy over standard fusion, it substantially reduces trajectory variance and improves motion smoothness, which are critical for applications requiring stable and continuous motion estimates. These results highlight the value of explicit error characterization when designing data fusion strategies for vision-based indoor positioning systems.

17.
arXiv (CS.LG) 2026-06-18

Riemannian MeanFlow for One-Step Generation on Manifolds

arXiv:2603.10718v3 Announce Type: replace Abstract: Flow Matching enables simulation-free training of generative models on Riemannian manifolds, yet sampling typically still relies on numerically integrating a probability-flow ODE. We propose Riemannian MeanFlow (RMF), extending MeanFlow to manifold-valued generation where velocities lie in location-dependent tangent spaces. RMF defines an average-velocity field via parallel transport and derives a Riemannian MeanFlow identity that links average and instantaneous velocities for intrinsic supervision. We make this identity practical in a log-map tangent representation, avoiding trajectory simulation and heavy geometric computations. For stable optimization, we decompose the RMF objective into two terms and apply conflict-aware multi-task learning to mitigate gradient interference. RMF also supports conditional generation via classifier-free guidance. Experiments on spheres, tori, SO(3), and SE(3) demonstrate competitive one-step sampling with improved quality-efficiency trade-offs and substantially reduced sampling cost.

18.
arXiv (CS.CV) 2026-06-16

A Comprehensive Survey of Knowledge-Based Vision Question Answering Systems: The Lifecycle of Knowledge in Visual Reasoning Task

Knowledge-based Vision Question Answering (KB-VQA) extends general Vision Question Answering (VQA) by not only requiring the understanding of visual and textual inputs but also extensive range of knowledge, enabling significant advancements across various real-world applications. KB-VQA introduces unique challenges, including the alignment of heterogeneous information from diverse modalities and sources, the retrieval of relevant knowledge from noisy or large-scale repositories, and the execution of complex reasoning to infer answers from the combined context. With the advancement of Large Language Models (LLMs), KB-VQA systems have also undergone a notable transformation, where LLMs serve as powerful knowledge repositories, retrieval-augmented generators and strong reasoners. Despite substantial progress, no comprehensive survey currently exists that systematically organizes and reviews the existing KB-VQA methods. This survey aims to fill this gap by establishing a structured taxonomy of KB-VQA approaches, and categorizing the systems into main stages: knowledge representation, knowledge retrieval, and knowledge reasoning. By exploring various knowledge integration techniques and identifying persistent challenges, this work also outlines promising future research directions, providing a foundation for advancing KB-VQA models and their applications.

19.
arXiv (CS.CL) 2026-06-18

Learning User Simulators with Turing Rewards

Learning to simulate human users in interactive settings could advance the training of agent assistants, evaluation of personalization systems, research in the social sciences, and more. Existing approaches generally do so by training a large language model (LLM) to match a single ground truth response, either by maximizing the log probability or by using a similarity reward. We instead propose {Turing-RL}: a Turing-Test-based reinforcement learning approach for training user simulator models. {Turing-RL} uses a discriminative Turing reward with an LLM judge to score how indistinguishable a generated response is from the real user's given the user's history, and the user simulator LLM learns to produce responses indistinguishable from what the user could have said with such rewards. Across two different domains–conversational chat and Reddit forum discussion–we find that {Turing-RL} consistently outperforms baseline methods on both LLM and human evaluation metrics. Our study suggests that optimizing for indistinguishability, rather than response matching, is effective for learning user simulators.

20.
arXiv (CS.CL) 2026-06-15

QIAS 2026: Overview of the Shared Task on Islamic Inheritance Reasoning

This paper presents a comprehensive overview of the QIAS 2026 shared task, organized as part of the OSACT7 Workshop and co-located with LREC 2026. The shared task was designed to evaluate the ability of large language models to perform complex reasoning in the religious and legal domain of Islamic inheritance. Unlike conventional question-answering benchmarks, QIAS 2026 focuses on end-to-end reasoning from natural language cases, requiring systems to perform the full inheritance calculation process, from identifying the eligible heirs to assigning the correct share to each beneficiary. To support this evaluation, the task was based on the MAWARITH benchmark, a dataset of $12{,}500$ Arabic inheritance cases annotated with intermediate reasoning steps and final answers. System submissions were evaluated using MIR-E, a multi-step metric that measures performance across the main stages of inheritance reasoning. A total of $16$ teams participated in the shared task, investigating a range of approaches, including prompting-based methods, retrieval-augmented generation, and fine-tuning strategies. The results show that Islamic inheritance remains a highly challenging benchmark for current language models, especially in stages that require precise legal interpretation and structured numerical reasoning. This overview summarizes the task design, dataset, evaluation framework, participating systems, and main results.

21.
arXiv (CS.LG) 2026-06-18

Do Time Series Foundation Model Benchmarks Hide Regime-Dependent Failures? Evidence from Traffic Speed Forecasting

arXiv:2606.18367v1 Announce Type: new Abstract: Standard benchmarks evaluate time series foundation models (TSFMs) using aggregate metrics, but these can mask severe failures in critical operating regimes. We introduce regime-stratified evaluation and apply it to three TSFMs on two standard traffic speed benchmarks. Traffic exhibits abrupt regime switching between free-flow and congested states, producing bimodal speed distributions during transitions. When we stratify by traffic regime, both accuracy and prediction-interval coverage degrade sharply during transitions: transition-regime MAE reaches 11 mph (versus 3 mph overall), and empirical coverage of 90% prediction intervals drops as low as 55%. These failures are invisible in aggregate metrics because free-flow observations dominate the sample. A simple historical conditional baseline (sampling from per-sensor training distributions) achieves better transition coverage than any TSFM, but has far worse overall accuracy. We propose bimodal mixture augmentation (BMA), a post-hoc method that combines TSFM forecasts with historical distributional knowledge, approaching the historical baseline's transition coverage while preserving the TSFM's accuracy. Our results suggest that TSFM benchmarks should incorporate regime-aware evaluation to surface failures that aggregate metrics hide.

22.
bioRxiv (Bioinfo) 2026-06-15

Multi-platform reassessment of human mitochondrial DNA methylation reveals signals consistent with technical artifacts

The existence and functional relevance of mitochondrial DNA methylation remain controversial. Here, we systematically profiled cytosine methylation and hydroxymethylation across human brain and blood tissues spanning healthy and malignant states using orthogonal sequencing approaches that avoid chemical conversion during library preparation. While nuclear DNA exhibited canonical methylation patterns, mitochondrial DNA consistently showed negligible signal, indistinguishable from background technical noise. By mapping cytosine-guanine sites between mitochondrial DNA and nuclear-embedded mitochondrial sequences, we demonstrate the potential of these nuclear counterparts to confound not only cytosine methylation but also hydroxymethylation measurements, corroborating and extending prior findings implicating nuclear contamination as a potential source of apparent mitochondrial epigenetic signals. Additional technical factors that inflate apparent mtDNA methylation signals were identified, including sequence context biases, flow cell chemistries, and coverage-dependent discrepancies between the heavy and light strands. Collectively, these results provide convergent evidence against the presence of biologically meaningful cytosine methylation or hydroxymethylation in mitochondrial DNA. These findings caution against interpreting apparent mtDNA methylation signals in human adult tissues as meaningful without rigorous orthogonal validation and comprehensive consideration of technical and analytical confounding factors.

23.
arXiv (CS.CL) 2026-06-16

Speaking the Language of Science: Toward a General-Purpose Generative Foundation Model for the Natural Sciences

In this report, we present LOGOS (Language Of Generative Objects in Science), a scientific generative language model that unifies heterogeneous tasks across the natural sciences within a single autoregressive framework based on a shared scientific grammar. It encodes diverse scientific objects and their spatial interactions as token sequences over a common vocabulary. By representing spatial contact and constraint patterns as discrete tokens, the model captures complex structural interactions in a purely sequential manner, without relying on explicit coordinates or geometric neural networks. This unified representation enables a wide range of downstream tasks to be formulated consistently as next-token prediction in the same grammar space, creating strong alignment between continued multi-domain pre-training and downstream objectives. Across diverse tasks, LOGOS consistently matches or outperforms domain-specific baselines, providing preliminary evidence for the feasibility of "one model fits all" in the natural sciences. We train LOGOS models at different scales (1B, 3B, and 8B parameters) and find a consistent positive correlation between model size and performance. This suggests that the future of AI for Science (AI4S) may not lie in building an independent technical stack that is separated from large language models (LLMs). Instead, it may depend on deeply aligning scientific foundation models with LLMs through shared architectures, shared training paradigms, and shared inference infrastructure, so that LLMs can truly become a new entry point for AI4S. We release the model weights and associated resources to facilitate further research.

24.
arXiv (CS.CV) 2026-06-16

MeshLoom: Feed-Forward Non-Rigid Registration of Mesh Sequences

We present MeshLoom, a feed-forward registration network that directly reconstructs vertex deformations across mesh sequences. Our approach advances non-rigid registration beyond existing models, which are typically constrained by costly per-instance optimization, narrow object categories, pairwise-only inputs, or merely intermediate outputs. The network is simple and efficient, registering multiple meshes within seconds. At its core lies a topology-aware encoder–decoder design. Specifically, we first introduce a topology-aware point representation that encodes the anchor (reference) mesh's topology into its per-vertex features. This representation strengthens the network's understanding of the anchor-mesh geometry and disambiguates points that are Euclidean-close yet geodesically distant. We then propose a multi-modal encoder that fuses this anchor-mesh representation with complementary cues from each frame, such as shape latents and image features. These multi-source signals are compressed into a compact global motion embedding that captures dense inter-frame correspondence. A lightweight decoder then queries this global embedding with the anchor-mesh point representation, retrieving per-vertex deformations at target timestamps. Through extensive experiments across diverse motions and object categories, we show that MeshLoom achieves state-of-the-art results on non-rigid registration. In addition, we find that our global embedding-then-query paradigm naturally enables the network to generate deformations at intermediate timestamps, which extends MeshLoom to motion interpolation and mesh morphing. Project page: https://meshloom.github.io/ .