Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-17

Contactless Respiratory Monitoring on Heterogeneous Mobile Robots: A Multimodal Edge-Computing Framework

Respiratory-rate (RR) monitoring is a critical component of remote triage and victim assessment in emergency response, disaster recovery, and infectious-disease scenarios, where minimizing physical contact can reduce responder risk and improve operational safety. However, field deployment of contactless RR monitoring remains challenging due to variable illumination, posture changes, platform heterogeneity, and the impracticality of wearable sensors in hazardous environments. In this paper, we present a modality-adaptive contactless RR monitoring framework for heterogeneous mobile robots with onboard edge computing. The proposed system combines brightness-adaptive sensor selection across RGB, thermal, near-infrared (NIR), and low-light cameras, keypoint-guided chest ROI extraction for posture-robust monitoring, and a signal-quality-index (SQI)-based filtering mechanism for reliable respiratory estimation. We implement and evaluate the framework on three robotic platforms spanning quadruped and wheeled locomotion and multiple edge-computing architectures. Experiments conducted across diverse lighting conditions, subject poses, and robot-to-subject distances demonstrate that the framework generalizes across platforms without per-platform algorithmic retuning, while revealing modality-specific operational boundaries. RGB provides the broadest coverage up to 8m, NIR remains effective up to 6m, thermal is reliable only at short range, and low-light sensing supports monitoring in complete darkness up to 8m. Overall, the results demonstrate the feasibility of multimodal contactless RR monitoring on mobile robots and support its use as a foundation for autonomous triage and victim assessment in hazardous search-and-rescue settings.

02.
arXiv (CS.CV) 2026-06-16

Ultra Flash: Scaling Real-Time Streaming Video Generation to High Resolutions

While recent autoregressive video diffusion models achieve remarkable streaming quality, they remain confined to low resolutions (e.g., 480P), leaving efficient, scalable, real-time high-resolution video generation a fundamental open challenge. To bridge this gap, we present Ultra Flash, a cascaded streaming framework capable of real-time high-resolution video generation. Ultra Flash achieves ~30 FPS at 1K resolution and ~18 FPS at 2K resolution on a single GPU through three key contributions: (1) an architecture-preserving T2V-to-TV2V super-resolution training paradigm coupled with an AIGC-oriented data degradation pipeline that effectively preserves the generative capability of the base model, enabling enhanced high-resolution detail when cascaded after mainstream low-resolution generative models; (2) a causal streaming latent upsampler paired with a high-resolution decoder, which enhances spatiotemporal coherence while enabling efficient latent spatial scaling and precise high-resolution decoding with negligible computational overhead; and (3) a cascade high-resolution streaming video generation optimization scheme that first performs hybrid-reward-enhanced sparse causalization and single-step distillation of the super-resolution model, then introduces cascaded streaming self-forcing preference optimization with dynamic cache management, jointly enhancing overall coherence, improving quality, and enabling real-time high-resolution streaming video generation. Extensive experiments demonstrate that Ultra Flash reliably produces ultra-high-resolution streaming video while maintaining state-of-the-art visual quality and superior efficiency. Project Page: https://xin1u.github.io/UltraFlash/

03.
arXiv (CS.LG) 2026-06-11

Accurate and Resource-Efficient Federated Continual Learning

arXiv:2606.11480v1 Announce Type: new Abstract: Federated continual learning (FCL) must learn from distributed task streams under limited resources, such as communication, computation, memory, and label availability. Existing FCL methods often rely on repeated local optimization, replay, and full supervision. Analytic alternatives avoid iterative training and replay, but using high-dimensional random features to improve accuracy requires a second-order feature statistic, the Gram matrix, which has a quadratic communication cost in the random feature size $M$. We propose FedRAN, a resource-aware analytic FCL framework that replaces gradient-based updates with compact random feature statistics. Each client transmits a truncated-SVD summary of its Gram matrix, reducing the dominant second-order upload from quadratic to linear in $M$ for fixed rank. The server performs a two-level QR-SVD subspace merge, spatially across clients and temporally across tasks, and solves a ridge classifier in closed form. FedRAN further supports label scarcity through prototype-based pseudo-labeling. Across CIFAR-100, ImageNet-R, and VTAB datasets, FedRAN improves average accuracy by up to 4.8 percentage points over the strongest baseline, uses 30.6-121.8$\times$ less per-client communication than optimization-based FCL, and is 190.3$\times$ faster on average than gradient-based baselines; with only 20% labels, pseudo-labeling improves average accuracy by up to 6.61 points. These results show that FedRAN enables accurate and resource-efficient FCL under communication, computation, and label constraints. The source code is available at https://github.com/JebacyrilArockiaraj/Fed-RAN-SSL.

04.
arXiv (CS.AI) 2026-06-15

HierSVA: A Data Synthesis Pipeline, Dataset, and Benchmark for LLM-Driven Hierarchical Hardware Formal Verification

arXiv:2606.13706v1 Announce Type: cross Abstract: We present HierSVA, an integrated suite that combines a pipeline, dataset, and benchmark for LLM-driven hierarchical hardware formal verification. HierSVA-SP pairs an RTL preprocessing toolchain with an LLM-in-the-loop formal verification flow to produce reference SystemVerilog Assertions (SVA) on hierarchical RTL. Applying it to BaseJump STL yields HierSVA-DS, a dataset of 342 modules, with hierarchy metadata and depths 0–9, accompanied by a deep subset of 28 module-bug pairs with natural-language specifications and bug variants. HierSVA-B decomposes assertion quality into six metric axes: syntax correctness, assertion proof success rate, vacuity, specification faithfulness, mutation coverage, and formal core coverage. Applying HierSVA-B to twelve recent LLMs reveals three findings. First, the module-level compile rate is 67.1\%; among generated assertions in evaluable runs, 82.1\% prove non-vacuously, but the corresponding assertion sets detect only 70.2\% of eligible injected faults and cover 36.2\% of the formal core. Second, on 211 evaluable model–module entries in the deep subset, assertion sets flag buggy RTL with 0.87 recall, but 40\% of predicted-buggy outcomes are false positives on correct RTL, limiting precision to 0.60. Third, agentic mode improves S1-style provability and strength metrics, but gains plateau and oscillate. Codes and artifacts are available at \href{https://github.com/HierSVAAnon/HierSVACodeAndArtifacts}{https://github.com/HierSVAAnon/HierSVACodeAndArtifacts}. Dataset is available at \href{https://huggingface.co/datasets/AnonymousHierSVA/HierSVA}{https://huggingface.co/datasets/AnonymousHierSVA/HierSVA}.

05.
arXiv (CS.AI) 2026-06-11

LLMs+Graphs: Toward Graph-Native, Synergistic AI Systems

arXiv:2606.11560v1 Announce Type: cross Abstract: Large Language Models (LLMs) have advanced rapidly, but their limitations in structured and multi-hop reasoning underscore the need for graph-native, synergistic artificial intelligence (AI) systems. Graph-structured data underpins critical applications across social, biological, financial, transportation, web, and knowledge domains, making it essential to understand how LLMs can leverage graph computation for grounded, context-rich inference. Three complementary synergies are emerging: LLMs augmented with graph computation for retrieval and reasoning; bidirectional integration between LLMs and knowledge graphs (KGs), where LLMs support KG construction and curation while KGs enforce semantic constraints and factual consistency; and AI agents strengthened by graph algorithms for planning, decision making, and multi-step reasoning. In parallel, LLMs introduce new capabilities for graph data management and graph machine learning (ML) through natural language interfaces and hybrid LLM-graph neural network (GNN) pipelines. This tutorial synthesizes the algorithms, systems, and design principles driving these converging directions, offering data science and data mining researchers a unified perspective on integrating LLMs, graph data management, graph mining, graph ML, and agentic computation into next-generation graph-native AI systems.

06.
arXiv (CS.AI) 2026-06-11

Continual Quadruped Robots Coordination via Semantic Skill Discovery

arXiv:2606.08102v2 Announce Type: replace-cross Abstract: Multi-quadruped coordination has attracted increasing attention due to its enhanced payload capacity, broader contact coverage, and improved adaptability to challenging tasks. Existing methods for multi-quadruped manipulation typically focus on predefined or closed task families, often relying on multi-agent reinforcement learning (MARL) to train task-specific coordination policies. However, such methods struggle in open-ended continual learning settings, where tasks arrive sequentially and robots are expected to acquire new coordination skills while reusing previously learned ones without catastrophic forgetting. To address this challenge, we propose Conquer, a semantic skill-library framework that formulates continual multi-quadruped coordination as a retrieve-adapt-update process. First, to accommodate varying team sizes across tasks, we design a team-structured Self-Allies-Goal (SAG) backbone that supports variable-cardinality robot teams by explicitly modeling each robot's own state, teammate context, and task goal. For each incoming task, Conquer constructs a task-level semantic descriptor from pre-execution information and retrieves a relevant skill from the library for adaptation. After successful execution, Conquer updates the skill library by extracting trajectory-level semantic descriptors and organizing them according to semantic distance, thereby enabling continual skill accumulation and cross-task knowledge transfer. Simulation experiments show that Conquer achieves a final average success rate of 95.6%, demonstrating strong forward transfer and negligible catastrophic forgetting. Real-world rollouts on Unitree Go2 teams further validate the deployment feasibility of Conquer for practical multi-quadruped coordination. Simulation and real-robot demonstration videos are available at: https://conquer-project.pages.dev/.

07.
arXiv (CS.AI) 2026-06-15

Applicability Condition Extraction for Therapeutic Drug-Disease Relations

arXiv:2606.14031v1 Announce Type: new Abstract: Identifying conditions that a certain drug takes therapeutic effect on a target disease is crucial for clinical decision-making support. However, most existing biomedical information extraction methods have focused on identifying only relations between drugs and diseases, while largely overlooking the context-specific conditions where such relations can apply. To address this problem, we introduce the task of applicability condition extraction for therapeutic drug–disease relations from biomedical research literature. We create the first dataset that has manually annotated triples of drugs, diseases, and applicability conditions on biomedical paper abstracts with 1,119 drug-disease pairs. Using this dataset, we systematically evaluate the performance of a range of existing methods. In addition, we propose a new method that enhances LoRA to consider relations between drugs and diseases. Our method consistently outperforms strong baselines across different evaluation settings. The source code and dataset of this paper can be obtained from: https://github.com/guantingluo98/Drug-ACE

08.
arXiv (CS.AI) 2026-06-11

Synthetic Homes: A Multimodal Generative AI Pipeline for Residential Building Data Generation under Data Scarcity

arXiv:2509.09794v5 Announce Type: replace Abstract: Computational models have emerged as powerful tools for multi-scale energy modeling research at the building and urban scale, supporting data-driven analysis across building and urban energy systems. However, these models require large amounts of building parameter data that is often inaccessible, expensive to collect, or subject to privacy constraints. We introduce a modular, multimodal generative Artificial Intelligence (AI) framework that integrates image, tabular, and simulation-based components and produces synthetic residential building datasets from publicly available county records and images, and present an end-to-end pipeline instantiating this framework. To reduce typical Large Language Model (LLM) challenges, we evaluate our model's components using occlusion-based visual focus analysis. Our analysis demonstrates that our selected vision-language model achieves greater visual focus than a GPT-based alternative for building image processing. We also assess realism of our results against a national reference dataset, finding that our synthetic data overlaps more than 95% for three of the four selected variables. This work reduces dependence on costly or restricted data sources, lowering barriers to building-scale energy research and Machine Learning (ML)-driven urban energy modeling, and therefore enabling scalable downstream tasks such as energy modeling, retrofit analysis, and urban-scale simulation under data scarcity.

09.
arXiv (CS.CL) 2026-06-17

Fine-tuning LLMs for Passive Depression Severity Estimation from AI Mental Health Dialogue

Depression is the leading cause of disability worldwide, and early detection of symptom change is essential for timely intervention. Validated instruments such as the Patient Health Questionnaire-9 (PHQ-9) support symptom monitoring at scale, but real-world completion rates are low, introducing response bias and systematic missingness. Passive approaches that infer severity from routinely generated data could close this gap. We address this by predicting PHQ-9 total scores directly from transcripts of conversations between users and an AI mental health application, requiring only conversation text and no additional clinical data. We fine-tune a Qwen3.5-27B backbone with a regression head, augment 3,111 ground-truth labels with pseudolabels generated by a reasoning model (Claude Opus) and iteratively trained intermediate models, for a combined dataset of 6,283 users. On a held-out test set of 842 users, our best model achieves MAE = 2.6, RMSE = 4.0, Pearson r = 0.80, and AUC = 0.91 at the PHQ-9 >= 10 clinical threshold. We also find AUC > 0.87 at every severity threshold from PHQ-9 >= 3 to PHQ-9 >= 24, demonstrating that the model captures depression severity across the full clinical spectrum. This work opens the door to passive, continuous symptom monitoring in AI mental health platforms, without requiring users to complete self-report measures.

10.
arXiv (quant-ph) 2026-06-19

Optimizing resource allocation for accuracy in noisy variational quantum algorithms

arXiv:2606.20153v1 Announce Type: new Abstract: For quantum algorithms to achieve their full potential, we need methodologies to optimize them, such as reaching a given output accuracy with minimal resource costs. Here, we develop such a methodology for a class of Noisy Intermediate-Scale Quantum (NISQ) algorithms. We leverage simulations of a Variational Quantum Eigensolver (VQE) to propose a phenomenological model of such algorithms that captures the complex relationship between algorithmic accuracy, algorithmic resource costs, and the noise that exists in realistic quantum hardware. For this, we take the algorithmic resource cost to be the total number of quantum gate-operations in the algorithm; minimizing this cost typically makes the algorithm faster and more energy-efficient. We consider the subtle trade-off between quantum circuit size (small circuits are too imprecise, but large ones are too noisy), and the number of iterations of that quantum circuit for the full algorithm to sufficiently converge. Using a noise-metric-resource methodology, we identify the sweet spot (of circuit size versus iterations) that minimizes the algorithmic resource costs for a desired algorithm accuracy. It also gives the circuit size that maximizes algorithm accuracy for a fixed resource cost. Our methodology provides a practical guideline for near-term deployment of variational algorithms on realistic noisy hardware, including hardware that uses error mitigation.

11.
arXiv (CS.CV) 2026-06-16

Ellipse Meets Bit-Planes: A Novel Approach to RNFL based Glaucoma Detection Using Advanced Image Processing and Deep Learning

This work proposes an integrated pipeline for automatic glaucoma detection method from easily available colour fundas images based on an adaptive algorithm for ellipse-based polar transformation, to enhance the analysis of the Retinal Nerve Fiber Layer (RNFL) as the primary biomarker for observing glaucomatous changes, regardless of optic disc and macula position. Utilizing this transformation, we introduce two distinct frameworks tailored to different operational needs. The first framework, a deep learning-inspired feature fusion approach, achieves a 99.3% detection rate, ideal for settings where high precision is essential, despite higher computational demands. The second framework employs a novel image-processing algorithm based on bit-plane slicing, offering 92.31% accuracy and optimized for environments requiring rapid inference with minimal resource consumption. Both frameworks provide scalable and cost-effective solutions for early glaucoma detection. This study highlights the potential of RNFL-based diagnostic tools in addressing the global challenge of glaucoma, particularly in underserved regions.

12.
arXiv (CS.CV) 2026-06-12

Heterogeneous LiDAR Early Fusion and Learned Re-Ranking Strategy for Robust Long-Term Place Recognition in Unstructured Environments

Robust localization in unstructured environments, such as agricultural fields, is a critical challenge for autonomous systems. LiDAR sensors provide detailed 3D information about the environment and are invariant to lighting conditions. For this reason, LiDAR-based place recognition methods have gained significant attention. In this paper, we propose MinkUNeXt-VINE++, a novel approach that combines early fusion of heterogeneous LiDAR data from two sensors (Livox Mid-360 and Velodyne VLP-16) and a learned re-ranking strategy in inference time. This fusion leverages the strengths of each sensor to provide a more comprehensive representation of the environment. Additionally, the re-ranking approach is particularly important in repetitive environments, such as vineyards, as finding true positives is a major challenge. We evaluated our approach using the TEMPO-VINE dataset, which provides heterogeneous LiDAR data in vineyard environments across different phenological stages. Our results demonstrate that MinkUNeXt-VINE++ significantly improves place recognition performance compared to single-sensor approaches and state-of-the-art methods. MinkUNeXt-VINE++ achieves a 20% improvement in the Recall@1 metric compared to single-sensor approaches, and +30% including re-ranking. The code of our method is publicly available for reproduction.

13.
arXiv (CS.CL) 2026-06-12

Identifiability Without Gaussianity: Symbolic World Models and Near-Infinite Temporal Consistency

Klindt, LeCun, and Balestriero (arXiv:2605.26379) proved that Joint-Embedding Predictive Architectures (JEPAs) achieve linear identifiability, the linear recovery of the world's true latent variables, if and only if the world's latent dynamics follow a Gaussian, stationary process. This Gaussian boundary implies a fundamental limit on temporal consistency: for any non-Gaussian physical system, the representation error of a statistical World Model grows monotonically with time. We prove that this limit is an artifact of the statistical alignment mechanism, not a property of World Models in general. We introduce the Physics-Grounded Symbolic Architecture (PGSA) and prove three results: (1) a PGSA achieves exact linear identifiability for all physical regimes, regardless of the latent distribution; (2) the per-step error of a PGSA is bounded by numerical precision alone; and (3) as a direct consequence, a PGSA maintains temporal consistency for an unbounded number of transitions, a property we term near-infinite temporal consistency. We further prove that statistical World Models cannot achieve this property for any non-Gaussian system, regardless of model capacity or the volume of training data. The algebraic cores of four of the theorems are formalized in Lean 4 with Mathlib4 v4.31.0 (zero sorry placeholders); the Klindt et al. converse is taken as an external premise. The contrast establishes that symbolic grounding in the causal generator of the world's dynamics is the sufficient condition and, in non-Gaussian regimes, the only condition for near-infinite temporal consistency.

14.
arXiv (CS.AI) 2026-06-18

From Specification to Execution: AI Assisted Scientific Workflow Management

arXiv:2606.18425v1 Announce Type: cross Abstract: Scientific workflow management systems (WMS) support scalable and reproducible execution of complex pipelines, but workflow design, implementation, and debugging remain largely manual and require significant expertise. Recent approaches using large language models (LLMs) show promise for workflow generation from natural language, but often rely on direct code synthesis, which limits transparency, reproducibility, and integration with workflow systems. We present an AI-assisted approach to scientific workflow management that combines specification-driven workflow generation, automated debugging, and distributed execution. The method introduces a structured specification phase that separates workflow intent, design, and implementation, allowing validation prior to code generation. We also develop an LLM-based debugging agent that diagnoses and resolves failures across multiple system layers. To support distributed execution and user interaction, we integrate Pegasus, a widely used WMS, with a Model Context Protocol (MCP) layer, providing a unified interface for workflow submission, monitoring, and control. We evaluate the approach using a federated learning workflow for medical imaging, chosen for its parallel, iterative, and dependency-intensive structure. The system generated and executed large-scale workflows with thousands of jobs, reduced debugging effort, and allowed non-expert users to construct workflows with expert-level design patterns. These results indicate that end-to-end AI-assisted workflow generation and execution is feasible, and point toward AI-driven platforms for managing the scientific workflow lifecycle.

15.
arXiv (CS.AI) 2026-06-12

HybridCodeAuthorship: A Benchmark Dataset for Line-Level Code Authorship Detection

arXiv:2606.12620v1 Announce Type: cross Abstract: Thanks to the rapid adoption of AI code assistants powered by large language models (LLMs), industry codebases are, increasingly, a hybrid of AI- and human-authored code. For risk management and productivity analysis purposes, it is crucial to enable fine-grained location detection of AI-generated code. To develop algorithms for this task, quality benchmarks are needed to assess performance. However, existing benchmarks tend to comprise academic, LeetCode-style problems and presume a code snippet is either completely human-authored or completely AI-authored, which is not reflective of the diverse intents and styles of industry codebases utilizing AI code assistants. To fill these gaps, we introduce HybridCodeAuthorship, a novel benchmark of Python code files with interleaved human- and AI-authored lines of code to simulate authentic utilization of AI code assistants. In this paper, we first present our dataset construction pipeline, which leverages CodeSearchNet, a massive collection of links to open sourced repositories on GitHub. We then benchmark the performance of two state-of-the-art AI-generated code detection algorithms at both the line- and chunk-level. Experimental results demonstrate that HybridCodeAuthorship is a challenging benchmark with a top-scoring algorithm, AIGCode Detector, obtaining a highest F1 score of 0.48 and 0.56 on chunk-level and line-level code detection tasks, respectively.

16.
arXiv (CS.LG) 2026-06-19

Adversarial Dependence Minimization

arXiv:2502.03227v2 Announce Type: replace Abstract: Minimally redundant representations are typically learned by minimizing feature covariance. However, covariance-based methods fail to eliminate all dependencies/redundancies, as linearly uncorrelated variables can still exhibit nonlinear relationships. To address this, we introduce ADM, a differentiable algorithm that minimizes statistical dependence between feature dimensions through an adversarial game: auxiliary networks identify dependencies, while the encoder removes them. We prove that mutual independence is achieved at the global optimum, empirically verify convergence, and study three potential applications: extending PCA to nonlinear decorrelation, improving generalization in image classification, and preventing dimensional collapse in self-supervised learning. By promoting statistically independent representations, ADM paves the way for learning more robust, compressed, and generalizable representations across diverse applications.

17.
arXiv (CS.LG) 2026-06-17

A Convex Quasilinearization Method for Solving Nonlinear PDEs with Physics-Informed Neural Networks

arXiv:2606.18175v1 Announce Type: cross Abstract: We present a numerical method for the forward solution of nonlinear partial differential equations (PDEs) in which Bellman-Kalaba quasilinearization reduces the nonlinear problem to a sequence of linear subproblems, each discretized by collocation onto a trial space that is linear in its parameters and solved by a single direct linear least-squares QR factorization. The trial space, which we term Linear-in-Learnables (LiL), comprises representations whose trainable parameters enter linearly, including random-feature extreme learning machines, spectral polynomial bases, and trigonometric expansions, each implemented as a physics-informed neural network. The method thus replaces the nonconvex gradient-based training that limits standard PINNs with a convex per-step solve. We establish local Newton-Kantorovich convergence of the outer iteration to a residual-limited neighborhood under an explicit smallness condition, with the limiting accuracy governed by the best-approximation residual of the trial space rather than by an optimization tolerance. The method, denoted LiL-Q, is assessed on seven benchmarks spanning scalar nonlinear PDEs (Bratu, viscous Burgers, Buckley-Leverett), coupled systems (plane-strain elasticity and the incompressible Navier-Stokes equations in two and three spatial dimensions), and steady-state Darcy flow with heterogeneous permeability. Across these problems, LiL-Q converges in single-digit outer iterations in most cases, even at the coarsest basis sizes and independent of the parameter count. When the exact solution lies in the span of the trial space, the method recovers it to machine precision in a single solve. On the Navier-Stokes benchmarks, it matches or exceeds published PINN solvers with up to two orders of magnitude fewer trainable parameters, without gradient-based optimization.

18.
arXiv (quant-ph) 2026-06-12

A Quantum Algorithm for Random Number Generation

arXiv:2606.13034v1 Announce Type: new Abstract: We present a quantum algorithm for random number generation that achieves a provable quadratic speedup over classical Markov chain mixing, building on the Diaconis-Shahshahani Fourier analysis of the top-to-random card shuffle. The algorithm integrates three quantum primitives into a unified mixing circuit: the Quantum Fourier Transform (QFT), which diagonalizes the Markov transition operator; controlled phase rotations, which encode the shuffle eigenvalue spectrum; and the Grover diffusion operator, which acts as a quantum analogue of the Aldous-Diaconis strong uniform stopping time by reflecting amplitudes about their mean at each iteration. For an n-qubit register, the mixing time is O(\sqrt{n \log n}) iterations. Extending to m qudits of local dimension d reduces this to O(\sqrt{\log_d N}) iterations, where N = d^m, compared to the classical O(n \log n) bound. The qudit formulation further reduces QFT circuit depth from O(\log^2 N) to O(\log_d^2 N) gates per layer by encoding the same N-state space using m = \log_d N subsystems instead of \log_2 N qubits. We validate both variants on IBM superconducting hardware.

19.
arXiv (CS.CV) 2026-06-12

Iterative Tool Usage Exploration for Multimodal Agents via Step-wise Preference Tuning

Multimodal agents, which integrate a controller e.g., a vision language model) with external tools, have demonstrated remarkable capabilities in tackling complex multimodal tasks. Existing approaches for training these agents, both supervised fine-tuning and reinforcement learning, depend on extensive human-annotated task-answer pairs and tool trajectories. However, for complex multimodal tasks, such annotations are prohibitively expensive or impractical to obtain. In this paper, we propose an iterative tool usage exploration method for multimodal agents without any pre-collected data, namely SPORT, via step-wise preference optimization to refine the trajectories of tool usage. Our method enables multimodal agents to autonomously discover effective tool usage strategies through self-exploration and optimization, eliminating the bottleneck of human annotation. SPORT has four iterative components: task synthesis, step sampling, step verification, and preference tuning. We first synthesize multimodal tasks using language models. Then, we introduce a novel trajectory exploration scheme, where step sampling and step verification are executed alternately to solve synthesized tasks. In step sampling, the agent tries different tools and obtains corresponding results. In step verification, we employ a verifier to provide AI feedback to construct step-wise preference data. The data is subsequently used to update the controller for tool usage through preference tuning, producing a SPORT agent. By interacting with real environments, the SPORT agent gradually evolves into a more refined and capable system. Evaluation in the GTA and GAIA benchmarks shows that the SPORT agent achieves 6.41% and 3.64% improvements, underscoring the generalization and effectiveness introduced by our method. The project page is https://SPORT-Agents.github.io.

20.
arXiv (CS.CL) 2026-06-16

Sycophancy as Material Failure under Pushback Loading: A Multi-Axis Characterization Across Three Loading Cases and up to Seventeen Material Charges

Sycophancy in LLMs is documented across 70+ papers, but expert agreement on construct boundaries remains low (ICC=.184; Ye et al., 2026). The construct fragments because behavioral classification depends on which surface form is privileged. We adopt a materials-science framing: conversation as test specimen under load, LLM-model as material charge, pushback as progressive load, stance-flip as material failure. We characterize this failure across three loading cases (debate n=1000; false-presuppositions n=3400; ethical-setting n=3400; 10-17 material charges per case; 7800 specimens total) using 14 turn-level axis-measurements spanning velocity, damage accumulation, frame-drift, brittleness, and direction stability, plus three speaker-resolved axes from an independent pipeline. The measurements are Hooke-coupled ($\sigma = E \cdot \varepsilon$ analog) and reproduce across loading cases with effects up to $|r_{rb}| = 0.35$ on debate; the sign structure adds a second pattern: the ethical-setting case inverts the velocity and accumulation blocks. Variance composition partitions into two profiles: debate is charge-dominated (brittle-fracture-like: the material grade decides), false-presuppositions and ethical-setting are topic-dominated (creep-like: the load decides); the ratios (2.03 vs 0.13/0.17) are estimator-dependent, for debate even in direction. Cross-judge reliability (GPT-4o vs Haiku 4.5) shows debate scoring is judge-robust (Cohen's $\kappa = 0.88$) while false-presupposition scoring is judge-sensitive ($\kappa = 0.36$) – a caveat single-judge benchmarks must report. This is the methodological move Ye et al.'s diagnosis calls for: a multi-axis characterization that does not depend on which surface form of the construct one privileges.

21.
medRxiv (Medicine) 2026-06-19

Performance of family history-based colorectal cancer screening criteria by race and age at diagnosis in the Disparities and Cancer Epidemiology (DANCE) study

Importance: Family history (FH) and age are the primary criteria employed for early colorectal cancer (CRC) risk stratification. We evaluated how well these criteria identify individuals diagnosed with CRC across age and racial groups. Objective: To evaluate the performance of FH and age based screening criteria for identifying individuals with CRC, with attention to differences by race and age at diagnosis. Design, Setting, and Participants: This case control and case only analysis used data from the Disparities and Cancer Epidemiology (DANCE) cohort, a population based study of invasive CRC cases diagnosed from 2013 to 2022, recruited through the Metropolitan Detroit Cancer Surveillance System and the Louisiana Tumor Registry. Analyses included 1,158 non-Hispanic Black (NHB) and non-Hispanic White (NHW) CRC cases and 1,434 cancer-free controls from the Inflammation Health and Lung Epidemiology (INHALE) study, enrolled from the same Detroit catchment area. Data were analyzed in 2025. Exposures: Self reported cancer FH among first-degree (FD) relatives and grandparents, summarized into three FH-based screening criteria: at least one FD relative with CRC (colon early-screening criterion), any FH of Lynch syndrome related cancers, and meeting NCCN criteria for Lynch syndrome genetic testing. Main Outcomes and Measures: Proportion of cases meeting each FH based screening criterion stratified by race and age at diagnosis (

22.
arXiv (CS.AI) 2026-06-17

MIVE: A Minimalist Integer Vector Engine for Softmax LayerNorm and RMSNorm Acceleration

arXiv:2606.17781v1 Announce Type: cross Abstract: The rapid growth of Large Language Models (LLMs) has intensified the need for specialized hardware accelerators that can satisfy stringent inference latency and power constraints. Although matrix multiplications dominate the overall computational workload, non-linear vector normalization operations, such as LayerNorm, RMSNorm and Softmax can become critical hardware bottlenecks. Existing accelerators typically implement these functions using dedicated hardware blocks, leading to duplicated resources and inefficient silicon utilization. To address this limitation, we propose a Minimalist Integer Vector Engine (MIVE), a programmable architecture capable of executing all three operations within a unified datapath. By exploiting common computational patterns across LayerNorm, RMSNorm and Softmax the proposed vector engine maximizes hardware sharing while reducing implementation overhead. Physical ASIC implementation results show that MIVE provides comprehensive multi-function support while achieving higher area and hardware efficiency than most state-of-the-art standalone accelerators.

23.
Nature (Science) 2026-06-08

Daily briefing: Human embryo genomes precisely altered

作者:

The use of ‘base editing’ to precisely tweak human embryos has divided researchers. Plus, the number of lives saved by less-polluting cars in China and how to tip the world towards a sustainable future. The use of ‘base editing’ to precisely tweak human embryos has divided researchers. Plus, the number of lives saved by less-polluting cars in China and how to tip the world towards a sustainable future.

24.
arXiv (CS.LG) 2026-06-15

A Composite Activation Function for Learning Stable Binary Representations

arXiv:2605.11558v2 Announce Type: replace Abstract: Activation functions play a central role in neural networks by shaping internal representations. Recently, learning binary activation representations has attracted significant attention due to their advantages in computational and memory efficiency, as well as interpretability. However, training neural networks with Heaviside activations remains challenging, as their non-differentiability obstructs standard gradient-based optimization. In this paper, we propose Heavy Tailed Activation Function (HTAF), a smooth approximation to the Heaviside function that enables stable training with gradient-based optimization. We construct HTAF as a sigmoid hyperbolic tangent composite function and theoretically show that it maintains a large gradient mass around zero inputs while exhibiting slower gradient decay in the tail regions. We show that Spiking Neural Networks, Binary Neural Networks and Deep Heaviside neural Networks can be trained stably using HTAF with gradient-based optimization. Finally, we introduce Implicit Concept Bottleneck Models (ICBMs), an interpretable image model that leverages HTAF to induce discrete feature representations. Extensive experiments across various architectures and image datasets demonstrate that ICBM enables stable discretization while achieving prediction performance comparable to or better than standard models.

25.
arXiv (CS.CV) 2026-06-16

Mitigating Visual Hallucinations in Multimodal Systems through Retrieval-Augmented Reliability-Aware Inference

Multimodal large language models (MLLMs) have demonstrated strong capabilities in vision-language understanding and natural-language response generation. However, these systems can still produce overconfident predictions and hallucination-like outputs, particularly when the visual evidence is weak, ambiguous, or semantically inconsistent. Most existing approaches focus on improving multimodal representation alignment or retrieval-augmented generation, while providing limited mechanisms to quantify instance-level prediction reliability or identify incorrect visual outputs. This work proposes a retrieval-augmented reliability-aware inference framework for trustworthy multimodal visual understanding. The proposed framework constructs an external visual evidence database using pretrained visual embeddings and nearest-neighbor retrieval over normalized feature representations. Retrieved evidence is used to estimate prediction trustworthiness through multiple reliability indicators, including similarity strength, class-support agreement, evidence margin, entropy-based uncertainty, and an aggregate reliability score. Based on these signals, a decision gate determines whether the system should accept the prediction, answer with caution, or abstain/fallback when evidence is insufficient. A multimodal response-generation layer then produces a final user-facing response conditioned on the reliability decision. Experiments on ImageNet-100 demonstrate that the proposed reliability-aware framework improves accepted prediction accuracy from 85.84\% to 88.88\% at 89.04\% coverage. The hallucination-like accepted wrong-answer rate is reduced from 14.16\% to 11.12\%. These results show that integrating retrieval evidence, reliability estimation, and selective decision gating can improve calibration and reduce overconfident visual errors without retraining large multimodal models.