Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CL) 2026-06-19

Multi-Agent Transactive Memory

The decentralized deployment of LLM agents with diverse capabilities across diverse tasks motivates infrastructure for knowledge sharing across heterogeneous agent populations. Just as search engines index human-generated artifacts to support human problem solving, retrieval systems can organize agent-generated artifacts for reuse across agent populations. We extend retrieval-augmented generation - which demonstrates the value of human-authored artifacts to individual agents - to retrieval of agent-generated artifacts supporting a population of agents. In particular, agent trajectories encode reusable procedural knowledge, yet these artifacts are typically discarded after a single use or retained only by the producing agent, forcing newly instantiated agents to repeatedly rediscover existing solutions. We propose Multi-Agent Transactive Memory (MATM), a framework for population-level storage and retrieval of agent-generated trajectories, where producer agents contribute trajectories to a shared repository and consumer agents retrieve them to improve task execution. We focus on interactive environments (ALFWorld and WebArena), where trajectories are long and encode especially rich procedural structure. Our experiments demonstrate that retrieving trajectories from MATM improves downstream task performance and reduces interaction steps without coordination or joint training. These results position MATM as a design pattern for population-level experience sharing in open agent ecosystems.

02.
arXiv (CS.LG) 2026-06-16

The Algebra of Units: From Buckingham's Pi-grec Theorem to Latent-Variable Learning

arXiv:2606.16737v1 Announce Type: cross Abstract: Engineers often measure many quantities-speed, pressure, temperature, length-expressed in different physical units. The Buckingham Pi-grec theorem states that these variables can always be combined into a smaller set of dimensionless numbers whose values fully determine the system's behaviour. Identifying the appropriate dimensionless groups has traditionally required expert knowledge and physical insight. This paper shows that they can instead be discovered automatically from data, without prior knowledge of the governing physics. The key observation is that, after logarithmic transformation, measurements collected under different scalings of the same system lie on a low-dimensional manifold whose geometry is determined by the underlying dimensionless groups. Singular value decomposition (SVD) identifies this manifold directly from data. A subsequent search over integer-exponent combinations recovers candidate dimensionless quantities, while a repeating-variable filter retains only those constructed from the machine's characteristic scales. This procedure recovers familiar engineering groups, including the flow coefficient, head coefficient, and Mach number, while excluding equivalent but less interpretable alternatives. The method is demonstrated on a synthetic compressor dataset containing 16,000 measurements. Starting from raw dimensional variables and no physics input, it recovers the correct dimensionless groups to numerical precision and reproduces the compressor performance map with an error below 0.01%. More broadly, the work reveals a close connection between classical dimensional analysis and modern data-driven learning. Both rely on the same underlying algebraic structure, suggesting new approaches for building physical models that are simultaneously interpretable, scalable, and data-efficient.

03.
arXiv (CS.CL) 2026-06-11

Breaking Entropy Bounds: Accelerating RL Training via MTP with Rejection Sampling

Reinforcement learning (RL) has become a key component in modern large language models, yet the rollout stage remains the key bottleneck in RL training pipelines. Although Multi-Token Prediction (MTP) offers a natural solution to accelerate rollouts through speculative decoding, many studies have observed that MTP acceptance rates degrade significantly during RL training, leading to limited speedup performance. To address this bottleneck, we present Bebop, a systematic study of MTP in LLM post-training, and offer practical recipes to integrate MTP into large-scale RL pipelines. First, we reveal that the MTP acceptance rate is fundamentally bounded by the fluctuation of model entropy, which demonstrates a clear negative linear relationship with the rise of entropy in the RL stage. Second, we show that probabilistic rejection sampling largely alleviates the disturbance introduced by entropy in RL compared to greedy draft sampling. We further identify that the conventional MTP training objectives (cross-entropy or KL) are suboptimal in such settings, and therefore we propose a novel end-to-end TV loss that directly optimizes multi-step rejection sampling acceptance rate, yielding ~10% acceptance rate improvements, achieving up to 95% acceptance rates and up to 25% extra inference throughput gains across mathematical reasoning, code generation, and agentic tasks. Third, we test various online MTP training strategies during RL and show that pre-RL MTP training with e2e TV loss and rejection sampling achieves a consistent acceptance rate and speedup throughout the entire RL, eliminating the need for costly online MTP updating. We provide extensive experiments and analysis that validate our findings. Experimental results show our method achieves up to 1.8x end-to-end acceleration in async RL training of Qwen3.5, Qwen3.6, and Qwen3.7 models.

04.
arXiv (CS.CV) 2026-06-17

Evaluating Synthetic Data Generation for Domain Generalization in Fetal Brain MRI Segmentation

Fetal brain tissue segmentation from magnetic resonance imaging (MRI) is crucial for studying neurodevelopment, but remains challenging due to data heterogeneity and limited annotations. Domain randomization (DR) has recently emerged as a promising strategy for single-source domain generalization by synthesizing training images with randomized artifacts, contrast, and resolution. In this work, we investigate how to maximize the out-of-domain (OOD) generalization of DR-based methods. We evaluate several synthetic data generation strategies for DR, with a particular focus on our recently proposed framework, FetalSynthSeg. We show that simple Gaussian mixture-based intensity modeling outperforms more complex physics-based simulations, and that intensity clustering (subdividing tissue classes based on intensity) improves OOD robustness. Evaluated on 348 fetal subjects from four sites spanning 0.55-3T and both T1w and T2w contrasts, FetalSynthSeg reaches state-of-the-art performance on several FeTA 2024 testing datasets (80-85 Dice score) and, for the first time, offers robust segmentation on modalities other than T2w for fetal brain segmentation (80 Dice on dHCP-T1w dataset). Compared with state-of-the-art methods such as BOUNTI, nnU-Net ensemble, and the FeTA 2024 winner, FetalSynthSeg delivers comparable or superior accuracy while maintaining strong robustness across domain shifts. Our code, model weights, and Docker image ready for easy inference are available at https://hub.docker.com/r/vzalevskyi/fetalsynthseg.

05.
arXiv (CS.LG) 2026-06-12

When Does Routing Become Interpretable? Causal Probes on Block Attention Residuals

arXiv:2606.13168v1 Announce Type: new Abstract: Block Attention Residuals (Block AttnRes) by replace fixed additive residuals with a learned softmax over earlier depth-source representations, surfacing cross-layer routing as an inspectable tensor in the forward pass. This is a tempting interpretability target: information flow normally inferred indirectly is now directly observable. We ask whether such exposure suffices for mechanistic interpretation. We probe two same-scale ($0.6$B) Block AttnRes checkpoints under identical routing-ablation interventions: a vanilla Qwen3 inference-wrapped through a deterministic recency-bias schedule that the codebase admits as a routing-equivalent loading path, and a Block AttnRes Qwen3 trained from scratch with routing as part of optimisation. The wrapped baseline's routing weights are content-independent and reproduce the schedule's analytic prediction. The trained AttnRes checkpoint instead exhibits three localised routing motifs: an embedding-source pathway through early-layer MLP, a current-state pathway through early-layer attention and MLP, and an older-history pathway through late-layer attention. Beyond this stratification, we find a sharp dissociation between average routing mass and causal importance: in both sublayers, the largest mass slice is not the largest causal contribution, and one source family carries appreciable mass with no detectable causal role under intervention. Architectural exposure of routing is therefore necessary but not sufficient for mechanistic interpretation: structured depth routing emerges only when routing has been part of training, and even then, descriptive routing summaries should be treated as candidate hypotheses to be tested by causal interventions, not as evidence of mechanism in their own right.

06.
medRxiv (Medicine) 2026-06-19

Cardiometabolic multimorbidity and care experiences in primary healthcare among Brazilian adults aged 50 and over (ELSI-Brazil)

Background: Population aging and the rising burden of non-communicable diseases have increased the prevalence of cardiometabolic multimorbidity (CM-MM) among older adults. Patient-reported experience measures (PREMs) are recognized as essential components of healthcare quality assessment, yet evidence on primary care experiences among individuals with CM-MM remains scarce. Objective: To analyze primary care experiences according to the presence of cardiometabolic multimorbidity among Brazilians aged 50 years and older. Methods: Cross-sectional study using data from the second wave of the Brazilian Longitudinal Study of Aging (ELSI-Brazil, 2019-2021; n = 9,949). CM-MM was defined as the self-reported coexistence of two or more of the following conditions: hypertension, diabetes mellitus, dyslipidemia, acute myocardial infarction, and stroke. Primary care experiences were assessed using a validated 12-item instrument organized into four domains: first-contact access, longitudinality, communication, and care coordination. Associations were estimated using Poisson regression adjusted for sociodemographic, health conditions, and healthcare utilization variables, with stratified analysis by Family Health Strategy (FHS) coverage. Results: CM-MM prevalence was 25.5%, with a progressive increase by age and an inverse gradient by education. Individuals with CM-MM reported significantly more positive experiences in longitudinality (mean index 2.53 vs. 2.34; adjusted PR = 1.22; 95%CI 1.12-1.33; p < 0.001) and, to a lesser extent, in communication (mean index 2.68 vs. 2.58; adjusted PR = 1.10; 95%CI 1.00-1.20; p = 0.041). No statistically significant differences were found in first-contact access or care coordination. After stratified by FHS coverage, the observed differences in longitudinality and communication were no longer statistically significant. Conclusions: CM-MM was associated with more positive primary care experiences in longitudinality and communication. The absence of differentiated experiences in first-contact access and coordination highlights structural gaps in primary care responsiveness to individuals with greater clinical complexity. Keywords: Multimorbidity; Cardiometabolic diseases; Primary Care; Patient-reported experience measures; Older adults; ELSI-Brazil.

07.
arXiv (quant-ph) 2026-06-11

Exploring Variational Entanglement Hamiltonians

arXiv:2505.10530v3 Announce Type: replace Abstract: Recent advances in analog and digital quantum-simulation platforms have enabled exploration of the spectrum of entanglement Hamiltonians via variational algorithms. In this work we analyze the convergence properties of the variationally obtained solutions and compare them to numerically exact calculations in quantum critical systems. We demonstrate that interpreting the cost functional as an integral permits the deployment of iterative quadrature schemes, thereby reducing the required number of measurements by more than an order of magnitude even in the presence of noise. We further show that a modified ansatz captures deviations from the Bisognano-Wichmann form in lattice models, improves convergence, improves trainability and provides a cost-function-level diagnostic for quantum phase transitions. Finally, we establish that a low cost value does not by itself guarantee convergence in trace distance. Nevertheless, it faithfully reproduces degeneracies and spectral gaps, which are essential for applications to topological phases.

08.
arXiv (CS.LG) 2026-06-19

Do Vision-Language Models Understand 3D Scenes or Just Catalogue Objects?

arXiv:2605.20448v2 Announce Type: replace-cross Abstract: Vision-language models reliably name objects in a scene, but do they represent the 3D layout those objects inhabit? We introduce a 3,034-sample human-curated benchmark targeting three components of spatial understanding: depth-ordered occlusion (probed via three independent counterfactual operationalisations), optical-geometry inference over visible reflections, and volumetric rearrangement planning. Six frontier and open-weight VLMs, scored by trained annotators on 18,204 responses with no LLM-as-judge, reveal a sharp dissociation: models that plan rearrangements over visible layouts at 53–97% accuracy and rarely violate collision constraints fall to 6–45% on occlusion and below 7% on reflections. An embodied-reasoning model reproduces the same profile. White-box analysis on Qwen3-VL-8B-Thinking localises the failure to the visual-token merger: spatial information recoverable throughout the vision encoder becomes inaccessible after token compression and only stabilises again when clean post-merger activations are patched into the language decoder.

09.
bioRxiv (Bioinfo) 2026-06-13

Testing the reliability of AI-generated protein structures

Although AlphaFold2 and its competitors have demonstrated remarkable abilities to predict protein structure, more work is needed to explore the limitations of these methods. Here we investigated the reliability of AlphaFold2 and ColabFold by creating a set of realistic but false protein sequences, using ColabFold to predict their structure, and then asking how often the program produces a high-scoring structure for a sequence that does not represent a protein. We determined that AlphaFold2 has a very small but non-zero false positive rate, estimated here at approximately 1 in 435 if one uses a threshold pLDDT score of 70 to define positive predictions. We also discovered, serendipitously, that some high-scoring sequences in the human genome were not false positives, but instead were previously unknown and un-annotated pseudogenes. These latter findings indicate that some well-established human annotations of protein-coding genes may have incorrectly extended the 5-prime untranslated regions too far. They also suggest that the false positive rate of AlphaFold2 is low enough that almost any high-scoring structure, even in a noncoding region, is worthy of further investigation.

10.
arXiv (CS.AI) 2026-06-18

Code-Augur: Agentic Vulnerability Detection via Specification Inference

arXiv:2606.18619v1 Announce Type: cross Abstract: The advent of agentic vulnerability detection is already becoming a watershed moment for software security. Audits conducted entirely by autonomous LLM agents are uncovering critical vulnerabilities in fundamental software underpinning digital society. Many of these vulnerabilities remained masked for years, surfacing only now with AI agents. Yet the reasoning behind these discoveries remains alarmingly opaque and unvalidated. What assumptions did the agent make about a function's inputs when it deemed that function to be secure? Failures in reasoning and incorrect assumptions can lead to missed vulnerabilities and reduce trust in agentic analysis. We propose a security-specification-first paradigm that (1) exposes the agent's tacit assumptions explicitly as security specifications and (2) continuously refines those specifications via runtime falsification. We realize our approach in Code-Augur, a novel harness for agentic vulnerability detection. Given a codebase, Code-Augur analyzes each component of the system for vulnerable code. When it deems a component to be secure, it commits the local invariants behind that judgment as in-source assertions. In parallel, Code-Augur leverages a guided fuzzer to attempt to falsify those assumptions. When the fuzzer triggers an assertion, this either reveals a genuine vulnerability or a flawed specification to refine. In both cases, this process grounds the agent's understanding, aligning its view of code intent with how the code actually behaves. On real-world subjects, Code-Augur effectively leverages security specifications to detect more vulnerabilities than other state-of-the-art agents. Additionally, Code-Augur found 22 new vulnerabilities in key open-source projects. Compared to curated specialized models like Claude Mythos, Code-Augur offers effective agentic vulnerability detection built on widely available LLMs like Sonnet and DeepSeek.

11.
arXiv (CS.AI) 2026-06-17

PIVOT: Bridging Black-Scholes Implied-Volatility and Price Objectives via Differentiable Jäckel Operator

arXiv:2606.17065v1 Announce Type: cross Abstract: Modern option-learning systems operate in two coordinates: price space, where markets quote and no-arbitrage constraints are most naturally enforced, and implied volatility (IV) space, where volatility surfaces are smoothed, regularized, and evaluated. The bottleneck is interface, not approximation: Jäckel's seminal "Let's Be Rational" (LBR) solver already inverts the Black-Scholes price to machine precision efficiently. What is missing is a differentiable layer that preserves LBR in the forward pass and avoids backpropagating through its branch logic. Such a layer must also confront the unavoidable singularity of the inverse map in the low-vega regime, where the sensitivity 1/vega diverges as vega -> 0. We close this gap with PIVOT, the Price-Implied-Volatility Objective Translator. PIVOT keeps the LBR forward pass intact and supplies the backward pass by implicit differentiation through the smooth Black-Scholes/Black-76 price map, with an explicit gating contract: invalid domains return NaN, well-conditioned rows receive the exact 1/vega gradient, and low-vega rows are attenuated rather than silently regularized. On a single H100, a fused Triton kernel reaches 1.79e9 IV/s at machine precision (9.3e-14 max relative error vs. the reference C solver); end-to-end label generation sustains 48.9M/s on synthetic chains and 16.6M/s on SPX OptionMetrics. In a HyperIV-style one-day reproduction on SPX, PIVOT-augmented objectives Pareto-dominate the baselines, reducing held-out price MAE by up to 43.4% and the strongest three-seed gated objective improving price MAE by 38.8% and IV MAE by 21.3% jointly; cross-asset results on RUT, VIX, and NDX show directional price-MAE gains of 40.1%, 24.2%, and 16.7%, while an ungated IV-roundtrip control collapses to a degenerate near-zero surface, confirming the gate as a correctness contract rather than a tuning knob.

12.
arXiv (CS.CL) 2026-06-11

Fanar-Sadiq: A Multi-Agent Architecture for Grounded Islamic QA

Large language models (LLMs) can answer religious knowledge queries fluently, yet they often hallucinate and misattribute sources, which is especially consequential in Islamic settings where users expect grounding in canonical texts (Qur'an and Hadith) and jurisprudential (fiqh) nuance. Retrieval-augmented generation (RAG) improves grounding, however, a single retrieve-then-generate pipeline is insufficient for diverse Islamic queries, including verbatim scripture, citation-grounded guidance, and rule-constrained computations such as zakat and inheritance. To address these challenges, we present Fanar-Sadiq, a bilingual Arabic-English Islamic QA system built on a multi-agent, tool-augmented architecture. It is a core component of the Fanar AI platform. Fanar-Sadiq routes Islamic queries to specialized modules within an agentic tool architecture. It supports intent-aware routing, retrieval-grounded fiqh answers with normalized citations and verification traces, exact verse lookup with quotation validation, and deterministic Sunni zakat and inheritance calculators with madhhab-sensitive branching. We evaluate the end-to-end system on public Islamic QA benchmarks and show strong effectiveness and efficiency. It is publicly accessible through an API and Web application and has received over 1.9M accesses in less than a year (https://api.fanar.qa/docs).

14.
arXiv (CS.AI) 2026-06-16

Sustainable Materials Discovery in the Era of Artificial Intelligence

arXiv:2601.21527v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) has transformed materials discovery, enabling rapid exploration of chemical space through generative models and surrogate screening. Yet current generative AI models for materials discovery, which now drive exploration of vast chemical and structural spaces, optimize candidates exclusively for structural stability and functional properties, with no integration of environmental assessment at any stage of the design loop. Prospective and ex-ante life cycle assessment methods exist and have been applied to emerging technologies, but they operate as standalone downstream analyses, not as active constraints within generative or active-learning pipelines. The result is that environmental feedback, even when produced, arrives after design decisions have been made rather than informing them. The disconnect between atomic-scale design and lifecycle assessment (LCA) reflects fundamental challenges: (i) data scarcity across heterogeneous sources, (ii) scale gaps from atoms to industrial systems, (iii) uncertainty in synthesis pathways, and (iv) the absence of frameworks that co-optimize performance with environmental impact. In this Perspective, we propose integrating upstream ML-assisted materials discovery with downstream LCA into the ML-LCA framework, comprising five components: information extraction for building materials-environment knowledge bases, harmonized databases linking properties to sustainability metrics, multi-scale models bridging atomic properties to lifecycle impacts, ensemble prediction of manufacturing pathways with uncertainty quantification, and uncertainty-aware optimization enabling simultaneous performance-sustainability navigation. Case studies spanning polymers, glass, photoresists, and cement demonstrate both necessity and feasibility while identifying material-specific integration challenges.

15.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

16.
arXiv (CS.CV) 2026-06-16

SGFormer++: Semantic Graph Transformer for Incremental 3D Scene Graph Generation

In this paper, we propose SGFormer++, a novel Semantic Graph Transformer for 3D scene graph generation (SGG), which aims to parse point cloud scenes into semantic structural graphs, where nodes denote detected object instances and edges encode their pairwise relationships, with the core challenge lying in modeling complex global scene structure. While existing graph convolutional network (GCN)-based methods suffer from over-smoothing and limited receptive fields, SGFormer++ leverages Transformer layers as its backbone to enable global message passing. Specifically, we introduce two key components tailored for 3D SGG: (1) a Graph Embedding Layer++ that efficiently integrates edge-aware global context with linear computational complexity, and (2) a Semantic Injection Layer++ that enriches visual features with linguistic priors from large language models (LLMs) and vision-language models (VLMs), boosting semantic representation without introducing extra trainable parameters. To further address the practical challenge of incremental SGG (I-SGG), where new relationship categories arrive sequentially, we equip SGFormer++ with a novel Spatial-guided Feature Adapter, which calibrates predicate features using subject-object spatial geometry to counter scale variation, and a Cascaded Binary Prediction Head that mitigates catastrophic forgetting via task-incremental classifier expansion and logit distillation. Extensive experiments on the 3DSSG benchmark demonstrate that SGFormer++ achieves state-of-the-art performance in both standard and incremental settings: it yields a significant 4.49% absolute improvement in Predicate A@1 under the incremental setting. Code and data are available at: https://github.com/Andy20178/SGFormer.

17.
arXiv (CS.LG) 2026-06-18

Lifecycle-Aware Dynamic Analysis for Secure ML Model Execution

arXiv:2606.19023v1 Announce Type: cross Abstract: The growing reliance on pre-trained Machine Learning (ML) models has introduced new attack surfaces. Recent vulnerabilities demonstrate that malicious behavior can be embedded within model artifacts, often bypassing existing defenses. Current model-scanning solutions primarily rely on static, format-specific rules or known attack signatures, which limit their ability to generalize across frameworks and to detect novel exploitation paths. In contrast, we propose a solution that focuses on the effects an attack has on the host system executing the model and builds on foundational intuitions about ML model execution. In particular, we observe that ML models operate within well-defined lifecycle phases and that, within each phase, interactions with the host system are highly structured and predictable. We translate these intuitions into Moat, a dynamic lifecycle-aware approach for securing ML model execution, and instantiate this design in Re-Moat, our reference implementation. We evaluate Re-Moat across multiple ML frameworks using 77,974 real-world model artifacts from the Hugging Face Hub, 31 Proofs-of-Concept (PoCs) from CVEs, and 334 models from a state-of-the-art dataset, and compare it against state-of-the-art model-scanning solutions. Our results show that our approach detects all evaluated attack classes while maintaining a close-to-zero false-positive rate, validating our intuitions and motivating dynamic analysis for securing ML model execution.

18.
arXiv (CS.CV) 2026-06-18

Architectural Bias in Face Presentation Attack Detection: A Comparative Study of Vision Transformers and Convolutional Neural Networks

Face Presentation Attack Detection (PAD) systems constitute a critical security layer in biometric authentication; however, existing approaches exhibit systematic performance disparities across demographic groups, disproportionately affecting individuals with darker skin tones. This paper presents a comparative empirical investigation of whether Vision Transformer architectures reduce demographic bias in face PAD systems relative to convolutional baselines. Experiments are conducted on the CASIA-SURF Cross-Ethnicity Face Anti-Spoofing (CeFA) dataset. Three architectures are evaluated: a Multimodal ViT-Tiny trained from scratch, a ResNet18 CNN baseline, and a pretrained DeiT-S fine-tuned on CeFA across African, East Asian, and zero-shot Central Asian demographic groups. DeiT-S achieves the highest overall accuracy of 97.27% and the lowest EER of 0.86%, outperforming ResNet18 at 90.15% accuracy. In terms of fairness, DeiT-S reduces the inter-ethnic ACER gap between African and East Asian subjects to 0.13%, compared to 0.75% reported in an LBP-based work [6], representing an 83% reduction. Most notably, while ResNet18 records a BPCER of 10.44% on zero-shot Central Asian subjects, DeiT-S maintains 2.89% on the same unseen group, demonstrating a 3.6x generalization advantage. These results suggest that pretrained Vision Transformers achieve superior PAD accuracy, produce smaller demographic performance gaps, and generalize more equitably across unseen demographic groups, indicating that cross-demographic fairness in PAD may partly be influenced by architectural design.

19.
arXiv (CS.LG) 2026-06-15

Side-Channel Attacks Bypass Protection in 3D Printers

arXiv:2606.13952v1 Announce Type: cross Abstract: Active Motor Noise Cancellation (AMNC) ships in commercial fused deposition modeling (FDM) 3D printers as a hardware countermeasure against acoustic side-channel attacks that target intellectual property (IP). We present the first empirical evaluation of a deployed AMNC countermeasure, using a public dataset of synchronized acoustic and vibration recordings from two AMNC-equipped Bambu Lab printers across 12 object classes. AMNC fully neutralizes the acoustic channel: classification accuracy is indistinguishable from the 8.33% random baseline. The vibration channel, which AMNC does not target, still leaks. With summary statistics the leak is coarse and amplitude-driven (vibration accuracy approximately 31% pooled, 36-47% within-printer), while the waveform shape carries essentially nothing (frequency-only features at chance). A full-sequence temporal model that ingests the ordered evolution of the print raises accuracy to approximately 61%, and an order-shuffling control (approximately 33%) shows that a substantial component is genuinely sequential and tied to print progression. The leak is device-specific: a classifier trained on one printer transfers near chance to the other. We conclude that AMNC is an acoustic-only defense: vibration remains a partial, geometry-correlated side channel it does not address, but one that does not, on this dataset, support full geometric reconstruction; reconstruction-grade attacks would require the magnetic or power channels AMNC also leaves untouched. We release all code.

20.
arXiv (CS.CL) 2026-06-16

Progressive Knowledge-Guided Large Language Model Framework for Bearing Fault Diagnosis

Vibration-based bearing fault diagnosis requires resolving three interrelated measurement challenges, including the trade-off between global statistical feature efficiency and local transient signal fidelity, insufficient traceability of measurement features to underlying fault physics, and ineffective multi-source measurement information fusion across diagnostic scales. This paper presents a progressive physics-guided multi-scale vibration signal processing framework that addresses all three challenges within a unified diagnostic pipeline. An 81-dimensional measurement descriptor, derived from bearing kinematic theory and characteristic defect frequencies, establishes a physically traceable feature space enabling real-time fault screening at approximately 20 ms per sample. A fault-adaptive signal segmentation mechanism then directs analytical attention toward fault-relevant waveform regions guided by physics-based priors, without manual feature engineering. Structured fault mechanism knowledge is further encoded implicitly in model parameters during training, enabling autonomous multi-scale measurement fusion without external knowledge dependencies at inference. Validated on four public benchmark datasets under diverse operating conditions, the framework achieves 98.49% diagnostic accuracy with a 12.6-fold reduction in computational cost relative to signal-level baselines. Interpretability analysis confirms that diagnostic feature activations align with established bearing fault mechanics, supporting measurement traceability in safety-critical industrial systems.

21.
bioRxiv (Bioinfo) 2026-06-22

Benchmarking cell type annotation in spatial transcriptomics: resolving cellular hierarchies, biological fidelity, and dynamic cell states

Spatial transcriptomics enables the quantification of gene expression within its native tissue context, providing unprecedented insight into tissue architecture, cellular ecosystems, and local cell-cell interactions at regional and single-cell resolution. Accurate cell type annotation is a critical prerequisite for interpreting these data and is often the first and most essential step in downstream analysis. Despite rapid advances in computational methods, cell type annotation remains challenging and frequently requires extensive expert-driven manual curation based on marker-gene expression, spatial context, and prior biological knowledge. While early approaches relied primarily on transcriptional similarity, newer methods increasingly incorporate spatial information, histological features, and multimodal data to improve annotation accuracy. Nevertheless, reliable annotation remains difficult when biological interpretation requires fine-grained subtype resolution, particularly for platforms with limited gene panels, tissues undergoing dynamic cellular state transitions, and studies in which reference and query datasets differ substantially in biological context or technical modality. Here, we present a systematic benchmark of 20 state-of-the-art cell type annotation methods across four spatial transcriptomics datasets spanning diverse technologies, experimental conditions, cell numbers, and gene panel sizes. Importantly, all benchmark datasets contain expert-curated cell type labels, including well-resolved cell populations and subtype annotations, providing high-quality biological ground truth for evaluation. The benchmark encompasses both reference-based and reference-free methods representing a broad range of computational frameworks. Performance was assessed using conventional classification metrics, including accuracy and F1-based measures, together with structure-aware metrics that evaluate both cell-level annotation accuracy and preservation of higher-order biological organization. Across datasets, annotation performance varied substantially according to tissue context, reference-query similarity, and annotation granularity. Fine-grained subtype annotation and recovery of rare cell populations remained challenging for many methods, particularly in datasets capturing injury, repair, developmental, and regenerative processes characterized by continuous cellular state transitions. Notably, high classification accuracy did not necessarily correspond to preservation of global cellular relationships or biologically coherent downstream pathway and gene-set enrichment analyses. Overall, scANVI, Seurat, and TACCO consistently ranked among the top-performing methods, although their relative advantages were context dependent. Together, our results provide a comprehensive assessment of current annotation strategies for spatial transcriptomics and offer practical guidance for selecting methods that best align with specific biological questions, dataset characteristics, and analytical priorities.

22.
arXiv (CS.AI) 2026-06-19

QMFOL: Benchmarking Large Language Model Reasoning via Quantifiable Monadic First-Order Logic Test Case Generation

arXiv:2606.20227v1 Announce Type: new Abstract: Large Language Models (LLMs) have made significant progress in reasoning, particularly in deductive reasoning, which is crucial for high-stakes decision-making. As models improve, evaluation benchmarks should evolve to keep pace. However, existing benchmarks lack fine-grained control over logical complexity and struggle to balance semantic diversity with logical consistency. To address these issues, we propose QMFOL, an automated framework for generating monadic first-order logic reasoning tasks with quantifiable and controllable complexity. It constructs formal logical structures using conjunction and disjunction patterns, enabling precise control over reasoning depth, width, label types, and distractors. These structures are then translated into natural language via LLMs, with logical consistency ensured through round-trip verification using an external prover. Based on our framework, we build QMFOLBench, a benchmark comprising 2880 instances with 960 configurations across diverse logical and semantic dimensions. Evaluations on six large reasoning models (LRMs) and two LLMs show that performance degrades and computational overhead increases with rising logical complexity. Models perform better on True-labeled tasks than on False or Unknown ones, and exhibit sensitivity to semantic variation. Overall, QMFOL offers a scalable and reliable approach for constructing deductive reasoning benchmarks with controllable complexity, enabling more precise evaluation of reasoning capabilities in modern language models.

23.
medRxiv (Medicine) 2026-06-15

Socioeconomic inequalities in smoking prevalence and intensity in Germany: A repeated cross-sectional analysis from 1998 to 2024

Background: Smoking inequalities by socioeconomic status have widened consistently in Germany, but sex-specific trends after 2013 and inequalities in daily cigarette consumption among smokers (intensity) are unknown. We analyzed trends in absolute and relative socioeconomic inequalities in smoking prevalence and intensity among German adults across three decades. Methods: We used 14 waves (1998-2024) of population-representative cross-sectional data from the German Socio-Economic Panel to estimate sex-specific trends in smoking prevalence and intensity in adults aged 25-64. Inequalities were quantified across strata of education, occupation, and equivalized household income using the absolute and relative concentration index with 95% bootstrap confidence intervals. Results: Overall smoking prevalence declined from 35.05% (CI: [33.90%, 36.20%] in 1998 to 22.19% (CI: [21.15%, 23.24%]) in 2024, and mean intensity from 17.49 (CI: [17.09,17.90]) to 13.33 (CI: [12.88, 13.79]) cigarettes/day. Over this period sex-differences in both outcomes narrowed almost completely. Absolute and relative inequalities in smoking prevalence widened across all SES dimensions, particularly for education and occupation. By 2024, inequalities were larger among women than men driven by a stagnating or rising smoking prevalence among low-SES women at least until 2018 alongside continued declines in higher-SES women and for men. Inequalities in smoking intensity, particularly related to income, were generally smaller than those in prevalence. Conclusion: Socioeconomic smoking inequalities in Germany widened from 1998 to 2024 primarily driven by reductions among higher-SES groups and increases in low-SES women. However, recent reductions in low-SES women may indicate a new phase in the smoking epidemic. Health equity considerations should be integrated into a targeted German tobacco control strategy.

24.
arXiv (CS.CV) 2026-06-17

LiveStarPro: Proactive Streaming Video Understanding with Hierarchical Memory for Long-Horizon Streams

Despite the remarkable progress of Video Large Language Models (Video-LLMs), current online architectures still struggle to simultaneously process continuous video streams, decide autonomously when to respond, and preserve long-horizon contextual memory. These obstacles undermine real-time responsiveness and cause severe forgetting throughout prolonged interactions. In this work, we introduce LiveStarPro, a live streaming assistant that is designed for proactive video understanding over long-horizon streams. The design of LiveStarPro rests on three complementary components. The first component is Streaming Verification Decoding (SVeD), an inference framework that identifies the appropriate response timing through single-pass perplexity verification, thereby eliminating the dependency on explicit silence tokens. The second component is Streaming Causal Attention Masks (SCAM), a training strategy that enforces incremental video-language alignment over variable-length streams. The third component is Tree-Structured Hierarchical Memory (TSHM), a recursive memory architecture that organizes evicted historical information into event chains and consequently enables efficient retrieval from effectively unbounded video streams. To facilitate a comprehensive evaluation under realistic online conditions, we further present OmniStarPro, a large-scale benchmark that spans 15 diverse real-world scenarios and that extends to hour-scale streams for the assessment of long-term recall. Extensive experiments demonstrate that LiveStarPro consistently surpasses existing methods, attaining a 28.9% improvement in semantic correctness and an 18.2% reduction in timing error, while its streaming key-value cache further yields a 1.58x inference speedup over the same model without caching. The model and the code are publicly available at https://github.com/sotayang/LiveStarPro.

25.
arXiv (CS.CV) 2026-06-16

Rel-Zero: Harnessing Patch-Pair Invariance for Robust Zero-Watermarking Against AI Editing

Recent advancements in diffusion-based image editing pose a significant threat to the authenticity of digital visual content. Traditional embedding-based watermarking methods often introduce perceptible perturbations to maintain robustness, inevitably compromising visual fidelity. Meanwhile, existing zero-watermarking approaches, typically relying on global image features, struggle to withstand sophisticated manipulations. In this work, we uncover a key observation: while individual image patches undergo substantial alterations during AI-based editing, the relational distance between patch pairs remains relatively invariant. Leveraging this property, we propose Relational Zero-Watermarking (Rel-Zero), a novel framework that requires no modification to the original image but derives a unique zero-watermark from these editing-invariant patch relations. By grounding the watermark in intrinsic structural consistency rather than absolute appearance, Rel-Zero provides a non-invasive yet resilient mechanism for content authentication. Extensive experiments demonstrate that Rel-Zero achieves substantially improved robustness across diverse editing models and manipulations compared to prior zero-watermarking approaches.