Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-16

Best Arm Identification with Minimal Regret

arXiv:2409.18909v2 Announce Type: replace Abstract: Motivated by real-world applications that necessitate responsible experimentation, we introduce the problem of best arm identification (BAI) with minimal regret. This variant of the multi-armed bandit problem elegantly amalgamates two of its most ubiquitous objectives: regret minimization and BAI. More precisely, the agent's goal is to identify the best arm with a prescribed confidence level $\delta$, while minimizing the cumulative regret up to the stopping time. Focusing on single-parameter exponential families of distributions, we leverage information-theoretic techniques to establish an instance-dependent lower bound on the expected cumulative regret. Moreover, we present an impossibility result that underscores the tension between cumulative regret and sample complexity in fixed-confidence BAI. Complementarily, we design and analyze the Double KL-UCB algorithm, which achieves asymptotic optimality as the confidence level tends to zero. Notably, this algorithm employs two distinct confidence bounds to guide arm selection in a randomized manner. Our findings elucidate a fresh perspective on the inherent connections between regret minimization and BAI.

02.
medRxiv (Medicine) 2026-06-15

Investigation of Intra-Fraction Stability and Inter-Fraction Reproducibility of Deep Inspiration Breath-Hold Across Two Hypofractionated Radiotherapy Regimens in the HYPORT Adjuvant Study.

Background: Deep Inspiration Breath Hold (DIBH) is a widely used respiratory motion management technique for minimizing cardiac dose in left-sided breast radiotherapy. In the Breast HYPORT Adjuvant study, DIBH was employed for cardiac sparing in patients without nodal irradiation using a standardized institutional protocol with the Varian Real-time Position Management (RPM) system. Both moderate-hypofractionation (control arm - 40Gy in 15 fractions) and one-week hypofractionation (experimental arm - 26 Gy in 5 fractions) regimens were delivered using this protocol. This study aimed to evaluate the robustness of DIBH by analyzing intra-fraction stability and inter-fraction reproducibility of breath-hold amplitude across the two treatment regimens. Methods: Respiratory waveforms acquired during each treatment session were analyzed to determine the median breath-hold amplitude and its standard deviation during beam delivery. Intra-fraction stability was assessed from vari- ations within individual treatment sessions, while inter-fraction reproducibility was evaluated relative to the simula- tion waveform amplitude across all treatment sessions. These parameters were compared between the two HYPORT regimens to examine breath-hold consistency during treatment delivery. Moreover, an additional comparison was made between the one-week hypofractionation regimen and the first five fractions of the moderate-hypofractionation regimen to evaluate the effect of treatment duration . Lung volumes from free-breathing and DIBH CT scans were analyzed to assess the effectiveness of patient breath-hold training. Results: Both arms demonstrated an average 1.7-fold increase of air volume in lung during the breath-hold position, confirming the effective implementation of DIBH during treatment planning and delivery. Structured training resulted in increased breath-hold amplitudes, with gains of 22.87% and 24.16% with respect to the first trial session in the experimental and control arms, respectively. Both regimens receive equivalent doses for approximately the same air volume in lung . Despite the different prescription doses in the two arms (26 Gy vs. 40 Gy), the experimental arm achieved an equivalent mean heart dose of 2.91% (75.6 cGy) compared with 2.95% (118.51 cGy) in the control arm, suggesting a similar cardiac preservation protocol adopted during treatment planning. Intra-fraction stability was similar between the control arm and the experimental arm, with median amplitude variations of 1.006 mm (95% CI: [0.998-1.015]) and 1.079 mm (95% CI: [1.067-1.097]), respectively. In contrast, inter-fraction reproducibility improved in the experimental arm, with lower deviation from simulation amplitude (0.44 {+/-} 0.24 mm vs. 0.66 {+/-} 0.25 mm) for the entire treatment schedule. The stability and reproducibility of experimental arm were further compared with the first five fractions of the control arm. The results were similar to those of the experimental arm. Conclusion: In this study, we compared two treatment regimens in terms of intra-fraction stability and inter-fraction reproducibility during DIBH radiotherapy. Both regimens demonstrated comparable intra-fraction stability, indicating effective motion management irrespective of treatment duration. However, the experimental arm showed better inter- fraction reproducibility, suggesting more consistent breath-hold performance throughout the treatment course. Based on stability and reproducibility, a reasonable narrowing of the DIBH gating window may be implemented with minor changes to the institutional protocol. The observed trend highlights the potential for improved consistency with the experimental approach and supports further investigation to better understand the underlying factors and strengthen these findings in future studies.

03.
arXiv (CS.CV) 2026-06-12

CRAG: Can 3D Generative Models Help 3D Assembly?

Most existing 3D assembly methods treat the problem as pure pose estimation, rearranging observed parts via rigid transformations. In contrast, human assembly naturally couples structural reasoning with holistic shape inference. Inspired by this intuition, we reformulate 3D assembly as a joint problem of assembly and generation. We show that these two processes are mutually reinforcing: assembly provides part-level structural priors for generation, while generation injects holistic shape context that resolves ambiguities in assembly. Unlike prior methods that cannot synthesize missing geometry, we propose CRAG, which simultaneously generates plausible complete shapes and predicts poses for input parts. Extensive experiments demonstrate state-of-the-art performance across in-the-wild objects with diverse geometries, varying part counts, and missing pieces. Project Page: https://ai4ce.github.io/CRAG/

04.
arXiv (CS.CV) 2026-06-11

MLT-Dedup: Efficient Large-Scale Online Video Deduplication via Multi-Level Representations and Spatial-Temporal Matching

The explosive growth of user-generated video content on online platforms is accompanied by the emergence of numerous near-duplicate videos–videos that are identical or highly similar but differ by partial edits. These duplicates degrade user experience and increase storage and bandwidth costs, making large-scale video deduplication a critical task. Existing video deduplication frameworks face a fundamental challenge in retrieving sufficient high-quality candidates under a limited index budget, as well as trade-offs between efficiency and precision. To address these issues, we propose MLT-Dedup, an efficient large-scale online video deduplication framework with Multi-Level representations and spatial-Temporal matching. Our approach employs a Multi-Level Video Encoder (ML-VE) to extract both fine-grained frame-level and sparse clip-level embeddings: sparse embeddings support efficient candidate retrieval, while fine-grained embeddings are loaded for precise pairwise matching. During matching, we introduce DiF-SiM, a Differential Feature-enhanced Similarity Module capable of locating duplicated temporal segments and providing reliable similarity evidence to support policy-driven deduplication decisions. Extensive experiments on a real-world large-scale platform demonstrate that MLT-Dedup reduces online repetition rates by 91% at 90% precision. Furthermore, our sparse retrieval design achieves a 5x increase in indexing capacity, enabling broader candidate coverage in real-world deployment.

05.
arXiv (CS.CV) 2026-06-11

FronTalk: Benchmarking Front-End Development as Conversational Code Generation with Multi-Modal Feedback

We present FronTalk, a benchmark for front-end code generation that pioneers the study of a unique interaction dynamic: conversational code generation with multi-modal feedback. In front-end development, visual artifacts such as sketches, mockups and annotated creenshots are essential for conveying design intent, yet their role in multi-turn code generation remains largely unexplored. To address this gap, we focus on the front-end development task and curate FronTalk, a collection of 100 multi-turn dialogues derived from real-world websites across diverse domains such as news, finance, and art. Each turn features both a textual instruction and an equivalent visual instruction, each representing the same user intent. To comprehensively evaluate model performance, we propose a novel agent-based evaluation framework leveraging a web agent to simulate users and explore the website, and thus measuring both functional correctness and user experience. Evaluation of 20 models reveals two key challenges that are under-explored systematically in the literature: (1) a significant forgetting issue where models overwrite previously implemented features, resulting in task failures, and (2) a persistent challenge in interpreting visual feedback, especially for open-source vision-language models (VLMs). We propose a strong baseline to tackle the forgetting issue with AceCoder, a method that critiques the implementation of every past instruction using an autonomous web agent. This approach significantly reduces forgetting to nearly zero and improves the performance by up to 9.3% (56.0% to 65.3%). Overall, we aim to provide a solid foundation for future research in front-end development and the general interaction dynamics of multi-turn, multi-modal code generation. Code and data are released at https://github.com/shirley-wu/frontalk

06.
medRxiv (Medicine) 2026-06-10

A Heterogeneous Graph Neural Network Framework for Multi-Horizon Stroke Mortality Prediction

Background: Machine learning models for stroke mortality prediction typically treat each time horizon independently and use flat tabular features that ignore the relational structure of electronic health records (EHRs). In this pilot study, we leveraged graph-based machine learning models to predict post stroke all-cause-mortality across three different time horizons. Methods: We developed Stroke Temporal Heterogeneous Graph (StrokeTHG), a heterogeneous graph neural network model for simultaneous multi-horizon stroke mortality prediction (30-day, 90-day, 1-year) using EHR data from Penn State Health System. The model encodes various relations among EHR entities (e.g., patient, diagnosis, comorbidity) and temporal encoding of admission time to better predict stroke mortality. We compared our proposed approach against various baseline methods, including Logistic Regression, Random Forest, and XGBoost. We also performed ablation and subgroup analyses, evaluated the quality of learned graph embeddings, and assessed the importance of different edge types in the graph. Results: We included 4,144 stroke patients (mean age 69.2 years; 54.3% men), of whom 3,332 (80.4%) survived their stroke after one year. 30-day, 90-day, and 1-year mortality rates were 9.7%, 13.7%, and 19.6%, respectively. Our proposed approach, StrokeTHG, achieved AUROC of 0.872, 0.878, and 0.837 across horizons, outperforming all tabular baselines. At [≥] , 75% specificity, the model identified 5-10 percentage points more mortality cases than the best baseline at each horizon. Subgroup analysis demonstrated consistent performance across sex subgroups and the largest discriminative gains in the Age 65-80 stratum. Edge-type ablation identified phenotype-patient and admission-patient edges in the constructed EHR graph as the most influential relational edges for mortality prediction. StrokeTHG embeddings outperformed all graph and matrix factorization baselines under an identical downstream classifier, confirming that performance gains stem from representation quality rather than classifier capacity. Conclusions: StrokeTHG demonstrates that heterogeneous graph representations of EHR data provide a consistent improvement over flat tabular models for multi-horizon stroke mortality prediction, with particular advantage at clinically actionable sensitivity thresholds and novel multi-horizon monotonic prediction capability. This methodological framework may be adaptable to other EHR-based clinical research studies seeking to leverage heterogeneous relational structures for predictive modeling.

07.
arXiv (CS.LG) 2026-06-12

From geometry to dynamics: Learning overdamped Langevin dynamics from sparse observations with geometric constraints

arXiv:2512.23566v2 Announce Type: replace-cross Abstract: How can we learn the laws underlying the dynamics of stochastic systems when their trajectories are sampled sparsely in time? Existing methods either require temporally resolved high-frequency observations, or rely on geometric arguments that apply only to conservative systems, limiting the range of dynamics they can recover. Here, we present a new framework that reconciles these two perspectives by reformulating inference as a stochastic control problem. Our method uses geometry-driven path augmentation, guided by the geometry in the system's invariant density to reconstruct likely trajectories and infer the underlying dynamics without assuming specific parametric models. Applied to overdamped Langevin systems, our approach accurately recovers stochastic dynamics even from extremely undersampled data, outperforming existing methods in synthetic benchmarks. This work demonstrates the effectiveness of incorporating geometric inductive biases into stochastic system identification methods.

08.
arXiv (quant-ph) 2026-06-17

Efficient time-series prediction on NISQ devices via time-delayed quantum extreme learning machine

arXiv:2602.21544v2 Announce Type: replace Abstract: We proposed a time-delayed quantum extreme learning machine (TD-QELM) for efficient time-series prediction on noisy intermediate-scale quantum (NISQ) devices. By encoding multiple past inputs simultaneously, TD-QELM achieves shallow circuit depth independent of sequence length, thereby, mitigating noise accumulation and reducing computational complexity. Experiments using the NARMA benchmark on both noiseless simulations and IBM's 127-qubit processor demonstrate that TD-QELM consistently outperforms conventional quantum reservoir computing in prediction accuracy and noise robustness. These results highlight TD-QELM as a practical and scalable framework for time-series learning on current NISQ hardware.

09.
arXiv (CS.LG) 2026-06-15

Muon$^p$: Muon with Fractional Spectral Powers

arXiv:2606.13867v1 Announce Type: new Abstract: Muon is an increasingly widely used optimizer that replaces a gradient $G=USV^\top$ with its polar factor $UV^\top$, thereby flattening the singular spectrum. However, full flattening discards singular-value information that may matter for adaptation. We introduce Muon$^p$, a Muon-style optimizer that instead uses fractional spectral-power updates $US^pV^\top$ for rational $p\in(0,1)$, interpolating between Muon and gradient descent. To make it practical, we prove that fractional spectral powers cannot be computed by any fixed univariate polynomial iteration, and furthermore derive low-degree odd bivariate recurrences that approximate $US^pV^\top$ using only matrix multiplications, preserving Muon's matrix-multiplication-only structure and compute complexity. We show that Muon$^p$ maximizes the linear improvement in loss under the Schatten $q$-norm for $q=1+\frac{1}{p}$. Empirically, Muon$^p$ is especially effective for finetuning: on billion-scale models, Muon$^p$ improves validation perplexity and downstream task performance. We further analyze when Muon$^p$ is less suitable, through the lens of spectral geometry. Our results reveal important insights on when preserving the singular spectrum can bring significant gains, and introduce a principled way to achieve them.

10.
arXiv (CS.CL) 2026-06-11

DEFINED: A Data-Efficient Computational Framework for Fine-Grained Creativity Assessment in Debate Scenarios

Human creativity has emerged as a critical competency in the era of large language models. Assessing creativity in complex, open-ended environments is a grand challenge in data mining, currently hindered by a reliance on standardized simple tasks and the scarcity of fine-grained expert data. As an ecologically valid assessment context, debate reflects multiple dimensions of creativity, encompassing both divergent thinking and convergent thinking. Moreover, debate is a data-rich domain, with a large volume of publicly accessible materials. Current mainstream automated scoring methods are poorly suited to complex settings such as debate, and therefore still rely on costly human evaluation. To this end, this paper proposes DEFINED, a data-efficient computational framework for fine-grained creativity assessment in debate scenarios. DEFINED operationalizes debate creativity through a hierarchical eight-dimensional metric system, implemented via a pre-trained autoregressive language model with a hierarchical scoring head that supports both fine-grained and coarse-grained evaluation. Statements and their associated expert scores were obtained from authentic debate competitions, and a constrained data augmentation strategy was employed to address the elite bias inherent in the original data. DEFINED adopts a mixed-granularity training strategy enabling robust learning from limited fine-grained supervision annotated by trained graduate experts. To rigorously validate ecological validity beyond synthetic benchmarks, we incorporate an empirical study with debate-naive participants, utilizing these authentic data to serve as a qualitative case study for mid-to-low proficiency populations. Across our evaluation protocol, our scoring model achieves accurate and stable scoring, outperforming prompt-based large language model evaluators and existing debate scoring methods.

11.
arXiv (CS.CL) 2026-06-16

Automatic Summarization of Doctor-Patient Encounter Dialogues Using Large Language Model through Prompt Tuning

Automatic text summarization (ATS) is an emerging technology to assist clinicians in providing continuous and coordinated care. This study presents an approach to summarize doctor-patient dialogues using generative large language models (LLMs). We developed prompt-tuning algorithms to instruct generative LLMs to summarize clinical text. We examined the prompt-tuning strategies, the size of soft prompts, and the few-short learning ability of GatorTronGPT, a generative clinical LLM developed using 277 billion clinical and general English words with up to 20 billion parameters. We compared GatorTronGPT with a previous solution based on fine-tuning of a widely used T5 model, using a clinical benchmark dataset MTS-DIALOG. The experimental results show that the GatorTronGPT- 20B model achieved the best performance on all evaluation metrics. The proposed solution has a low computing cost as the LLM parameters are not updated during prompt-tuning. This study demonstrates the efficiency of generative clinical LLMs for clinical ATS through prompt tuning.

12.
arXiv (CS.CV) 2026-06-17

Rethinking Cross-Layer Information Routing in Diffusion Transformers

Diffusion Transformers (DiTs) have become a de facto backbone of modern visual generation, and nearly every major axis of their design – tokenization, attention, conditioning, objectives, and latent autoencoders – has been extensively revisited. The residual stream that governs how information accumulates across layers, however, has been directly inherited from the original Transformer. In this paper, we present a systematic empirical analysis of cross-layer information flow in DiTs, jointly along depth and denoising timestep, and identify three concrete symptoms of traditional residual addition, namely monotonic forward magnitude inflation, sharp backward gradient decay, and pronounced block-wise redundancy. Motivated by this diagnosis, we propose Diffusion-Adaptive Routing (\textsc{DAR}), a drop-in residual replacement that performs learnable, timestep-adaptive, and non-incremental aggregation over the history of sublayer outputs. Moreover, the proposed \textsc{DAR} is compatible with many modern Transformer enhancement methods, such as REPA. On ImageNet $256\times256$, \textsc{DAR} improves SiT-XL/2 by $2.11$ FID ($7.56$ vs.\ $9.67$) and matches the baseline's converged quality with $8.75\times$ fewer training iterations. Stacked on top of REPA, it yields a $2\times$ training acceleration in the early stage, suggesting cross-layer information routing as an underexplored design axis in diffusion modeling, one that operates orthogonally to existing representation-alignment objectives. Beyond pretraining, \textsc{DAR} can also be applied during the fine-tuning stage of large-scale T2I models and preserves high-frequency details during Distribution Matching Distillation.

13.
arXiv (CS.AI) 2026-06-19

PCBSchemaGen: Reward-Guided LLM Code Synthesis for Printed Circuit Boards (PCB) Schematic Design with Structured Verification

arXiv:2602.00510v2 Announce Type: replace Abstract: Most LLM code-synthesis benchmarks rely on unit tests as the reward oracle, but PCB schematic design has none: correctness is defined by structured physical constraints over real IC packages and pin-level assignments, per-task golden references are unavailable, and SPICE simulation does not validate schematic-level correctness. We introduce PCBSchemaGen, a training-free inference-time framework that turns a frozen LLM into a verifiable, repairable PCB schematic generator. The framework induces a domain schema from IC datasheets to ground LLM decoding, pairs it with a deterministic 5-layer continuous-reward verifier with pin-level error localization, and refines candidates through a Thompson Sampling arm-acquiring bandit. We evaluate on 2 PCB benchmarks covering 227 real-IC tasks across 22 unified circuit domains, including a public-schematic-derived suite that serves as a fully held-out generalization test (verifier, KG library, and prompts frozen before any evaluation). Under our framework, an open-weight 31B model (Gemma-4-31B) passes 81.3% of PCBBench tasks on average, and the same framework transfers across both benchmarks with zero verifier code changes; a Circuitron-style inference-time prompting baseline on the same Gemma-4-31B backbone collapses on hard system-level designs. This suggests inference-time refinement under a deterministic structural verifier is a general recipe for reference-free LLM code synthesis in domains without unit-test oracles. Our benchmarks and deterministic verifier are publicly available at https://github.com/HZou9/PCBSchemaGen_v2.

14.
arXiv (CS.LG) 2026-06-18

Provable quantum speedups for computing persistence in topological data analysis

arXiv:2410.21258v2 Announce Type: replace-cross Abstract: Topological data analysis (TDA) aims to extract noise-robust features from a data set by examining the number and persistence of holes in its topology. We provide an efficient quantum algorithm for a computational problem closely related to a core task in TDA – determining whether a given hole persists across different length scales. Further, we prove the problem itself is $\mathsf{BQP}_1$-hard, implying that a classical solution is extremely unlikely; this stands in contrast to all previous quantum approaches to TDA, where the problems were also intractable for quantum computers, or where a rigorous proof of classical hardness still remains open. This result implies an {exponential} quantum speedup for this problem under standard complexity-theoretic assumptions. Our approach relies on encoding the persistence of a hole in a variant of the guided sparse Hamiltonian problem, where the guiding state is constructed from a harmonic representative of the hole.

15.
arXiv (CS.LG) 2026-06-15

Machine-learned particle flow as a foundation model for collider physics

arXiv:2606.14373v1 Announce Type: cross Abstract: The workflow from particle collision to physics analysis passes through a series of reconstruction steps that are traditionally modular and disconnected, with no shared representation linking low-level detector data to high-level analysis tasks. We show that casting event reconstruction as a machine learning problem naturally produces such a shared representation. We repurpose a machine learning model trained for particle-flow reconstruction (MLPF) to perform three distinct analysis tasks: jet flavor identification, jet energy regression, and missing momentum regression. By appending the per-particle latent representations learned during reconstruction as additional input features, we substantially improve over baselines that use kinematic features alone. We further demonstrate that a single linear layer trained using only the latent representations achieves competitive performance against state-of-the-art baseline architectures, and outperforms the baseline for missing momentum regression with approximately 35 times fewer parameters. These results demonstrate that the latent representations learned during reconstruction encode essential physics information needed for downstream analysis, establishing MLPF as a foundation model and offering a concrete step toward an end-to-end pipeline from detector data to physics analysis.

16.
arXiv (CS.CV) 2026-06-16

BRDFusion: Physics Meets Generation for Urban Scene Inverse Rendering

Inverse rendering of urban scenes from captured videos enables numerous applications, including content creation and autonomous driving simulation. Physically-based rendering methods follow and control lighting physics, but suffer from reconstruction and rendering artifacts. While generative models produce realistic videos, they offer limited consistency and controllability. We present BRDFusion, a unified framework that combines two complementary models for inverse and forward rendering. Specifically, BRDFusion recovers explicit, consistent scene properties with physical modeling and alleviates optimization ambiguity with generative priors. During forward rendering, the physical model provides controllable rendering from the scene configuration, and the generative model denoises and fixes artifacts. Therefore, our method produces high-quality videos while allowing precise control, outperforming baselines in real and synthetic scenes. Moreover, BRDFusion supports novel-view relighting, night simulation, and dynamic object insertion/editing. Project page: https://shigon255.github.io/brdfusion-page/

17.
PLOS Computational Biology 2026-06-02

A comparative study of simulation-based inference methods for epidemic models with identifiability considerations

作者:

by Geunsoo Jang, K. Selçuk Candan, Gerardo Chowell Epidemic models play a critical role in understanding transmission dynamics, generating forecasts, and informing public health interventions when they are properly calibrated to epidemiological data. Traditional Bayesian inference methods rely on the likelihood function to update prior knowledge using observed data. However, for realistic epidemic models, likelihood functions are often analytically intractable or computationally prohibitive, which can limit the applicability of these methods. Simulation-based inference provides a promising alternative by approximating posterior distributions through forward simulations rather than an explicit likelihood evaluation. In this study, we present a systematic comparison of four approaches: Approximate Bayesian Computation (ABC), Neural Posterior Estimation (NPE), a neural method with temporal embedding, and Preconditioned Neural Posterior Estimation (PNPE), which integrates elements of both classical and neural techniques. These methods are evaluated across epidemic models of increasing complexity under fixed simulation budgets and varying levels of observational noise, with explicit attention to both structural and practical identifiability. Our results show that neural methods generally improve posterior fidelity and predictive accuracy compared with ABC under constrained simulation budgets. PNPE achieved strong performance in several simulation settings, whereas temporal embeddings improved inference in models with complex epidemic dynamics by capturing sequential dependencies. These gains come with important trade-offs: PNPE required substantially greater computational resources and, unlike fully amortized NPE-based methods, may require reconditioning for each new observation. In contrast, ABC remained computationally efficient and provided reasonable, though often more conservative, posterior estimates. Overall, our findings highlight trade-offs among computational efficiency, posterior accuracy, uncertainty calibration, and inference reusability, suggesting that method selection should depend on model complexity, data quality, identifiability, and available computational resources.

18.
arXiv (CS.CL) 2026-06-16

LLM-based Visual Code Completion for Aerospace Geometric Design

Recent advances in both Large Language Models (LLMs) and Vision Language Models (VLMs) have seen a step change in their ability to perform visual code completion, but the aerospace industry, which prioritizes safety and explainabilty over rapid LLM adoption, currently has no publicly announced LLM-based geometric design copilot systems in commercial use by aerospace Original Equipment Manufacturers (OEMs). This paper presents a LLM-based visual programming copilot application for aerospace engineering design tasks, using a visual programming variant of the ReAct methodology and GPT 5.4. In addition to the copilot, we describe Wingbuilder, a new Grasshopper plugin library with custom components for aerospace-specific geometry abstraction, and an associated Aerospace Visual Programming Dataset (AVPD) with 18 aerospace expert designed tasks at different levels of difficulty alongside ground truth solutions. We evaluate our copilot application with a user trial involving two experienced aerospace engineers from a large aircraft manufacturing company. We find our copilot visual programming ReAct methodology was successful in generating suggestions that participants found helpful, but slow ReAct inference times limit its usefulness to more complex time-consuming tasks where waiting for good copilot solution suggestion was worthwhile. Participants reported they liked the tool and would be willing to use it in the future.

19.
arXiv (quant-ph) 2026-06-15

Calibrated Helstrom geometry on the Bloch ball via Connes spectral distance

arXiv:2606.13824v1 Announce Type: new Abstract: We show that the equal-prior Helstrom trace-distance geometry of qubit states is recovered from Connes spectral distance in a finite scalar-qubit-scalar model. The two scalar reference sectors couple isotropically to the qubit block through identity Dirac links, so that the full Bloch ball, including mixed states, inherits its standard chordal trace-distance geometry from the finite spectral metric. The scalar-sector distances serve a distinct calibration role: they determine the individual link lengths, satisfy a Pythagorean consistency relation, and reconstruct the middle-sector scale.

20.
arXiv (quant-ph) 2026-06-16

Exact Many-body Quantum Dynamics in One-Dimensional Baths via Collective Spins

arXiv:2505.00588v2 Announce Type: replace Abstract: Computing the exact dynamics of many-body quantum systems becomes intractable as system size grows. Here, we present a symmetry-based method that provides an exponential reduction in the complexity of a broad class of such problems $\unicode{x2014}$ qubits coupled to one-dimensional electromagnetic baths. We identify conditions under which partial permutational symmetry emerges and exploit it to group qubits into collective multi-level degrees of freedom, which we term ''superspins.'' These superspins obey a generalized angular momentum algebra, reducing the relevant Hilbert space dimension from exponential to polynomial. Using this framework, we efficiently compute many-body superradiant dynamics in large arrays of qubits coupled to waveguides and ring resonators, showing that $\unicode{x2014}$ unlike in conventional Dicke superradiance $\unicode{x2014}$ the total spin length is not conserved. At long times, dark states become populated. We identify configurations where these states exhibit metrologically useful entanglement. Our approach enables exact treatment of complex dissipative dynamics beyond the fully symmetric limit and provides a rigorous benchmark for approximate numerical methods.

21.
arXiv (CS.CV) 2026-06-12

Comparing Commercial Depth Sensor Accuracy for Medical Applications

Depth estimation has numerous medical and surgical applications. We benchmark four depth sensors on a porcine bone specimen, a porcine belly specimen, and a silicone kidney phantom using stylus-sampled references. These objects contain several real-world challenges, including homogeneous surfaces, specular surfaces, and subsurface scattering. The comparison includes stereo, structured-light, and time-of-flight sensors at a distance of approximately 50 cm. Specifically, the Intel RealSense D405 (Intel RealSense, United States), PMD Flexx2 (pmdtechnologies, Germany), Stereolabs ZED 2i (Stereolabs, France), and Zivid 2M+ 60 (Zivid, Norway) are compared. The Zivid 2M+ 60 performed best across all objects and metrics considered in this work. The ZED ranked second for real tissue, but last on the phantom.

22.
arXiv (CS.CV) 2026-06-15

RAMEN: Resolution-Adjustable Multimodal Encoder for Earth Observation

Earth observation (EO) data spans a wide range of spatial, spectral, and temporal resolutions, from high-resolution optical imagery to low resolution multispectral products or radar time series. While recent foundation models have improved multimodal integration for learning meaningful representations, they often expect fixed input resolutions or are based on sensor-specific encoders limiting generalization across heterogeneous EO modalities. To overcome these limitations we introduce RAMEN, a resolution-adjustable multimodal encoder that learns a shared visual representation across EO data in a fully sensor-agnostic manner. RAMEN treats the modality and spatial and temporal resolutions as key input data features, enabling coherent analysis across modalities within a unified latent space. Its main methodological contribution is to define spatial resolution as a controllable output parameter, giving users direct control over the desired level of detail at inference and allowing explicit trade-offs between spatial precision and computational cost. We train a single, unified transformer encoder reconstructing masked multimodal EO data drawn from diverse sources, ensuring generalization across sensors and resolutions. Once pretrained, RAMEN transfers effectively to both known and unseen sensor configurations and outperforms larger state-of-the-art models on the community-standard PANGAEA benchmark, containing various multi-sensor and multi-resolution downstream tasks. Our code and pretrained model are available at https://github.com/nicolashoudre/RAMEN.

23.
arXiv (quant-ph) 2026-06-17

Learning Arbitrary Lindbladians with Quantum Error Correction

arXiv:2606.18188v1 Announce Type: new Abstract: We study ansatz-free Lindbladian learning, the problem of reconstructing the generator of an open quantum system without prior knowledge of its Hamiltonian or dissipator structures. This problem exhibits two distinct information-theoretic precision limits: Hamiltonian components unmasked by dissipation are Heisenberg-limited, while the remaining Lindbladian components are subject to the quadratically worse standard quantum limit. Existing approaches that attain these optimal scalings strongly rely on pre-specified structure of interaction and noise, leaving the ansatz-free setting an open problem. In this work, we present the first standard-quantum-limited algorithm for learning arbitrary sparse Lindbladians. Under an additional physically motivated regularity condition, our framework also learns the Hamiltonian component disjoint from the dissipator at the Heisenberg limit, without prior knowledge of either the Hamiltonian or dissipator supports. Our main technical ingredient is a recursive random stabilizer-code construction that suppresses the strongest Lindbladian terms while preserving sensitivity to weaker unknown ones. These results establish a scalable framework for characterizing unknown open quantum systems, with quantum error correction serving as a key learning primitive.

24.
arXiv (CS.AI) 2026-06-19

SleepMaMi: A Universal Sleep Foundation Model for Integrating Macro- and Micro-structures

arXiv:2602.07628v2 Announce Type: replace Abstract: While the shift toward unified foundation models has revolutionized many deep learning domains, sleep medicine remains largely restricted to task-specific models that focus on localized micro-structure features. These approaches often neglect the rich, multi-modal context of Polysomnography (PSG) and fail to capture the global macro-structure of a full night's sleep. To address this, we introduce SleepMaMi , a Sleep Foundation Model engineered to master both hour-long sleep architectures and fine-grained signal morphologies. Our framework utilizes a hierarchical dual-encoder design: a Macro-Encoder to model full-night temporal dependencies and a Micro-Encoder to capture short-term characteristics from biosignals. Macro-Encoder is trained via Demographic-Guided Contrastive Learning, which aligns overnight sleep patterns with objective subject metadata, such as age, sex and BMI to refine global representations. Micro-Encoder is optimized via a hybrid Masked Autoencoder (MAE) and multi-modal contrastive objective. Pre-trained on a massive corpus of $>$20,000 PSG recordings (158K hours),SleepMaMi outperforms or matches state-of-the-art existing foundation models across a diverse suite of downstream tasks, demonstrating superior generalizability and label-efficient adaptation for clinical sleep analysis.

25.
arXiv (CS.LG) 2026-06-17

Rethinking Dataset Distillation for Classification: Do Distilled Sets Outperform Coresets?

arXiv:2606.18209v1 Announce Type: new Abstract: Dataset distillation (DD) has emerged as a prominent approach in data centric machine learning, aiming to synthesize compact training sets for efficient training by compressing the information in large datasets into a small number of synthetic samples. However, DD methods are often evaluated under inconsistent evaluation protocols, ranging from standard ERM to single/multi-teacher supervision, making it difficult to isolate the effectiveness of distilled data from evaluation. Moreover, many prior methods claim that DD outperforms data pruning approaches such as coreset selection (CS), based on the assumption that restricting condensed datasets to subsets of real samples fundamentally limits their expressiveness. In this work, we critically evaluate DD methods through large-scale experiments using standardized datasets and evaluation protocols to assess their intrinsic effectiveness. We benchmark seven state-of-the-art (SOTA) DD methods on ImageNet-1K, ImageNet100, and ImageNette, using three widely adopted training protocols against three CS strategies. Our results show that while some DD methods fail to outperform even simple random subsets, the SOTA DD approaches are comparable to or worse than coresets on large-scale datasets and incur a substantially higher cost for construction. Beyond accuracy, we also evaluate the representativeness, diversity, and quality of condensed sets, and find that coresets consistently achieve better coverage of the original data distribution. These findings highlight the limited practical advantages of current DD methods and show that coresets remain competitive and are often a more computationally efficient alternative for data-centric learning.