Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-15

Long-read sequencing enables high-accuracy mitochondrial heteroplasmy detection in Parkinson's disease

Background: Low-frequency heteroplasmic mitochondrial DNA (mtDNA) variants are associated with aging and neurological diseases, including Parkinson's disease (PD). Targeted deep mtDNA sequencing using PacBio HiFi long reads has the potential to resolve heteroplasmy across the full mitochondrial genome with high accuracy. Methods: To validate Vega PacBio sequencing for detecting mtDNA heteroplasmy, we analyzed four predefined mixtures of two mtDNA haplotypes. We generated a single long-range PCR amplicon covering the entire mitochondrial genome. These amplicons were mixed at predefined ratios (minor mixture haplotype component: 5%, 2%, 1%, and 0.1%). Variant calling was performed using Mutserve2, and accuracy was assessed by calculating the F1 score from comparisons between expected and detected variants. Full-length mtDNA PacBio sequencing was applied to investigate heteroplasmy across fibroblast passages derived from five LRRK2 p.Gly2019Ser variant carriers (n=3 affected with PD and n=2 unaffected carriers). Changes in mtDNA heteroplasmy level and variant load were assessed longitudinally using a linear mixed model. Results: The single-amplicon approach enabled full-length haplotype resolution without amplification bias associated with overlapping PCR strategies. The F1 score of the predefined mixtures was 1.0 for heteroplasmy levels between 5% and 1% and remained high (0.91) at 0.1%. We detected n=10/62 variants discordant with the Illumina reference at the 0.1% mixture, but sensitivity remained very high at 1.00 in that mixture. Detected minor variants closely matched expected heteroplasmy levels, with average variant levels of 0.057 (5%), 0.022 (2%), 0.011 (1%), and 0.001 (0.1%). Across twelve fibroblast passages, we observed fewer mtDNA heteroplasmic variants ({beta}=-3.2, p=0.026). Increased heteroplasmic variant load over time was also associated with older age ({beta}=1.50, p=0.001) and PD affection status ({beta}=5.0, p=1.0 x 10-4) in LRRK2 variant carriers. Notably, we observed distinct patterns of heteroplasmic variants that either increased or decreased in heteroplasmy level across passages. Conclusion: PacBio HiFi sequencing, combined with a single-amplicon strategy, enables accurate full-length mtDNA heteroplasmy detection and longitudinal analysis, providing a valuable tool for studying mitochondrial variation and dynamics in disease.

02.
arXiv (CS.LG) 2026-06-19

Evolutionary Two-Stage Hyperparameter Optimization Strategies for Physics-Informed Neural Networks

arXiv:2606.20442v1 Announce Type: new Abstract: Physics-Informed Neural Networks (PINNs) solve Partial Differential Equations (PDEs) by embedding physical laws into neural network training. However, their performance suffers from unstable convergence, training plateaus, and strong sensitivity to architectural and optimization hyperparameters due to the highly non-convex and multi-term structure of the physics-informed loss. In this setting, the outer-loop hyperparameter search is a noisy and black-box optimization problem over heterogeneous parameters, where classical local or gradient-based strategies are easily trapped in suboptimal regions. Evolutionary algorithms, with their population-based exploration and ability to handle mixed, non-differentiable search spaces, provide a more robust mechanism for discovering promising configurations. We propose and investigate a two-stage approach based on evolutionary algorithms that combines exploration and exploitation parts of PINNs training to improve solution accuracy and robustness under fixed computational budgets. In the first stage, we perform low-fidelity training runs with truncated epochs to rapidly screen candidate configurations, treating hyperparameter selection as a black-box outer-loop problem. In the second stage, only the most promising candidates are fully trained with standard gradient-based optimizers to refine the solution. Evaluated on three popular problems, namely Advection, Klein-Gordon and Helmholtz equations, our method consistently outperforms standard training and achieves significantly lower mean error within constrained computational resources.

03.
arXiv (CS.AI) 2026-06-19

AI4SE and SE4AI Exploration: A Decade Looking Back and Forward

arXiv:2606.19630v1 Announce Type: new Abstract: The March 2020 INCOSE INSIGHT special issue on AI and Systems Engineering (SE) became the most downloaded issue in the publication's history and launched a research community that now draws over 250 registrants to its annual workshop. In this article, we trace the progress in AI and SE across three phases (labeled here foundational, applied, and LLM inflection) based on the authors' reading of the field's core papers, and describe our opinions of where the community has converged and where critical gaps remain. Separately, a human-AI agreement literature review leveraging both human expertise and six AI models was performed to assess the relevance of 1,712 INCOSE INSIGHT articles and 889 SERC publications. The results identify five critical research gaps and offer guidance for practitioners navigating AI adoption, assurance, and workforce transformation in SE. We share the agreement data and the AI4SE/SE4AI Explorer web application so readers can compare their own relevance judgments with the human and AI raters.

04.
arXiv (quant-ph) 2026-06-11

Implementing Hamiltonian Renormalization Group Flow on Quantum Computers with VAPOR

arXiv:2606.11306v1 Announce Type: cross Abstract: While Hamiltonian Lattice Gauge Theory is gaining traction, today's limited numerical capacity leaves simulations affected by discretization errors. This motivates the implementation of renormalization group (RG) techniques to find discretization-error-free operators. To this end, we introduce VAPOR, a variational quantum algorithm that decomposes operators into Pauli strings, identifies RG flow orbits, and determines fixed points of a naively discretized operator. We illustrate this using a toy model of a kinematic operator in a symmetry-restricted SU(2) Yang-Mills theory.

05.
arXiv (quant-ph) 2026-06-19

Hybrid VQE-CVQE algorithm using diabatic state preparation

arXiv:2512.04801v2 Announce Type: replace Abstract: We propose a hybrid variational quantum algorithm that has variational parameters used by both the quantum circuit and the subsequent classical optimization. Similar to the Variational Quantum Eigensolver (VQE), this algorithm applies a parameterized unitary operator to the qubit register. We generate this operator using diabatic state preparation. The quantum measurement results then inform the classical optimization procedure used by the Cascaded Variational Quantum Eigensolver (CVQE). We demonstrate the algorithm on a system of interacting electrons and show how it can be used on long-term error-corrected as well as short-term intermediate-scale quantum computers. Our simulations performed on IBM Brisbane produced energies well within chemical accuracy.

06.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.

07.
arXiv (CS.CV) 2026-06-16

Implementation of Licensed Plate Detection and Noise Removal in Image Processing

作者:

Car license plate recognition system is an image processing technology used to identify vehicles by capturing their Car License Plates. The car license plate recognition technology is also known as automatic number-plate recognition, automatic vehicle identification, car license plate recognition or optical character recognition for cars. In Malaysia, as the number of vehicle is increasing rapidly nowadays, a pretty great number of vehicle on the road has brought about the considerable demands of car license plate recognition system. Car license plate recognition system can be implemented in electronic parking payment system, highway toll-fee system, traffic surveillance system and as police enforcement tools. Additionally, car license plate recognition system technology also has potential to be combined with various techniques in other different fields like biology, aerospace and so on to achieve the goal of solving some specialized problems.

08.
medRxiv (Medicine) 2026-06-15

Filum Terminale Diameter on Routine Pediatric MRI: A Large-Cohort Clinical Reference in 3,406 Children and the Age-Dependent Meaning of the 2-mm Thickened-Filum Threshold

Background. A filum diameter >2 mm is the conventional MRI threshold for a thickened filum, but it derives from small, mostly adult series showing no age dependence; whether one cutoff suits all of childhood is untested. Objective. To build an age-specific filum-diameter reference on routine pediatric MRI and test, adjusting for image resolution, whether the 2-mm threshold is age-stationary. Materials and methods. In this retrospective study an nnU-Net tracer measured the maximal filum diameter on consecutive lumbosacral MRI; versus manual tracing it showed negligible bias but moderate single-measure agreement. After excluding report-confirmed fatty filum, lipoma, or tethered cord, the proportion >2 mm was analysed within one acquisition protocol and by logistic regression adjusting for voxel size and slice thickness. Results. Of 7,245 examinations, 3,869 (53%) were traceable; untraced ones were younger (median 0.75 vs 2.0 years). The presumed-normal cohort had median diameter 1.48 mm. At matched resolution, 2 mm marked the 94th percentile in infants (5.6% exceeded it) but the 83rd by 3-6 years (17.4%); the age effect persisted after adjusting for voxel size and slice thickness (3-6 years vs infants, adjusted OR 4.7; P < .001). Conclusion. Filum diameter clusters near 1.5 mm, and the fixed 2-mm cutoff flags ~5% of infants but ~17% of preschoolers. Caliber should be judged against an age-specific clinical reference, not one fixed cutoff; a thick filum is not itself a diagnosis of tethered cord.

09.
arXiv (math.PR) 2026-06-11

Arrangements of Consecutive Numbers in Mallows Permutations

arXiv:2606.12410v1 Announce Type: cross Abstract: We study the random variable that counts the number of specific arrangements of clustered consecutive numbers in permutations under the Mallows distribution. We provide an asymptotic expression for the expected value of this random variable. This result extends and tightens the previously known result by Pinsky (2022) concerning clustered consecutive numbers in Mallows permutations. Moreover, we identify a range of parameters for which the distribution of the number of arrangements of clustered consecutive numbers in Mallows permutations is close to a Poisson distribution.

10.
arXiv (CS.LG) 2026-06-16

False Sense of Safety in Selective Signal Classification: Auditing Bound Tightness and Exchangeability for Risk Control

arXiv:2606.15153v1 Announce Type: new Abstract: Selective prediction with distribution-free risk control promises that, with confidence 1-delta over the calibration draw, the error rate of accepted inputs stays below a user budget alpha. We audit this promise on signal-domain detectors – machine anomalous-sound detection (ASD) and AI-generated-image forensics – for four calibration rules: uncertified empirical thresholding (NAIVE) and certified Hoeffding, Clopper-Pearson (CP), and betting (WSR) upper confidence bounds. We report three findings. (i) NAIVE thresholding, common in practice, exceeds its declared budget in 49-73% of synthetic trials (n=200 calibration points) and in up to 68% of real-data splits: a false sense of safety rather than a broken theorem, since the rule never had a certificate. (ii) Tightness matters: CP and WSR certify substantial coverage where Hoeffding certifies none, with zero observed budget overruns under exchangeable splits. (iii) Under grouped deployment (unseen machine types or generators), certified rules overrun in 9-30% of trials – far above delta – showing the failure lies in the broken exchangeability premise, not in the bounds; a conservative per-group threshold restores validity at a severe coverage cost.

11.
medRxiv (Medicine) 2026-06-17

Womens intentions and motivations towards health behaviour change before pregnancy: a cross-sectional survey of pregnant women in Australia

Introduction: The preconception period (i.e. the weeks and months before pregnancy) is a critical window during which parental health behaviours can influence pregnancy outcomes and the childs long-term health. Modifiable factors such as nutrition, physical activity, substance use, and environmental exposures play a key role, yet womens ability to adopt and sustain healthy behaviours is shaped by complex psychological, social and environmental influences. This study applies the Theory of Planned Behaviour to identify the beliefs underpinning womens preconception behaviours, with the aim of informing support for effective and sustained health behaviour change. Methods: An Australian national retrospective cross-sectional survey of pregnant women (18-49 years), recruited through social media platforms. The 92-item survey captured respondent socio-demographics, pregnancy status and health conditions, health behaviours, and beliefs regarding preconception health behaviours. Respondents level of pregnancy planning was categorised using the London Measure of Unplanned Pregnancy (LMUP). Items regarding preconception beliefs were structured in accordance with the Theory of Planned Behaviour, with a focus on regular exercise, healthy diet, and alcohol avoidance. These beliefs variables were analysed using structured equation modelling to identify paths between latent variables and the items used to estimate each concept. Results: The study was completed by 430 pregnant women of whom 72.7% had a planned pregnancy. Most had a partner, were university educated and in good health. Structural equation modelling showed intention strongly predicted exercise ({beta}=0.65), healthy diet ({beta}=0.54) and alcohol avoidance ({beta}=0.64). Perceived control and partner norms influenced intentions, whereas health professional norms had limited effect. Positive beliefs were associated with folate supplement use and smoking cessation. Conclusion: These findings highlight intention as a key driver of preconception health behaviours, with perceived control and partner influences playing a more significant role than individual beliefs or health professional input. Effective interventions should therefore address structural barriers and actively involve partners, while respecting womens autonomy. Overall, couples-focused, multi-level strategies are likely essential to support meaningful and sustained preconception health behaviour change.

12.
arXiv (CS.AI) 2026-06-16

MUZZLE: Adaptive Agentic Red-Teaming of Web Agents Against Indirect Prompt Injection Attacks

arXiv:2602.09222v2 Announce Type: replace-cross Abstract: Large language model (LLM) based web agents are increasingly deployed to automate complex online tasks by directly interacting with web sites and performing actions on users' behalf. While these agents offer powerful capabilities, their design exposes them to indirect prompt injection attacks embedded in untrusted web content, enabling adversaries to hijack agent behavior and violate user intent. Despite growing awareness of this threat, existing evaluations rely on fixed attack templates, manually selected injection surfaces, or narrowly scoped scenarios, limiting their ability to capture realistic, adaptive attacks encountered in practice. We present MUZZLE, an automated agentic framework for evaluating the security of web agents against indirect prompt injection attacks. MUZZLE utilizes the agent's trajectories to automatically identify high-salience injection surfaces, and adaptively generate context-aware malicious instructions that target violations of confidentiality, integrity, and availability. Unlike prior approaches, MUZZLE adapts its attack strategy based on the agent's observed execution trajectory and iteratively refines attacks using feedback from failed executions. We evaluate MUZZLE across diverse web applications, user tasks, and agent configurations, demonstrating its ability to automatically and adaptively assess the security of web agents with minimal human intervention. Our results show that MUZZLE effectively discovers 44 new attacks on 4 web applications with 10 adversarial objectives that violate confidentiality, availability, or privacy properties across different LLMs and agent scaffolds. MUZZLE also identifies novel attack strategies, including 3 cross-application prompt injection attacks and an agent-tailored phishing scenario.

13.
arXiv (CS.AI) 2026-06-15

Robustness without Wrinkles: Parallel Simulation and Robust MPC for Certified Deformable Manipulation

arXiv:2606.14188v1 Announce Type: cross Abstract: We present CORD-SLS, a real-time control method for safe deformable object manipulation, with a focus on ropes and cloth. At its core is a GPU-parallel differentiable simulator with contact smoothing which enables efficient gradient-based planning through intermittent contact. To robustly satisfy constraints under model and sensing uncertainty, we develop a real-time, GPU-parallel output-feedback robust model predictive control (MPC) algorithm that plans with this simulator. We further show that the simulator accelerates model-based RL for training neural manipulation policies. To improve real-world robustness, we use conformal prediction to calibrate visual-feedback and perception-error bounds for MPC, producing reachable tubes that enable high-probability safe control. We evaluate CORD-SLS on high-dimensional, contact-rich rope and cloth manipulation tasks in simulation and hardware, including obstacle avoidance, routing, folding, and smoothing. Across settings, CORD-SLS achieves millisecond-speed planning, exceeding baselines in safety, speed, and task success.

14.
medRxiv (Medicine) 2026-06-10

Human-centred design approaches to health facility design: Evidence from perinatal care settings in Ethiopia and Bangladesh

While significant progress has been made in perinatal outcomes over recent decades in low- and middle-income countries (LMICs), maternal and newborn quality improvement initiatives often fail to account for the spatial conditions in which they are implemented. Health systems are increasingly deploying evidence-based care models into built environments that are not optimally structured to meet the needs of its patient population. As the principal users, patients and health care workers can offer pragmatic insights about improving these structural designs. Our objective was to gather insights from patients, providers, and companions about how the physical design of their health facilities influenced their experience receiving or delivering perinatal care. We conducted a prospective observational study using a human-centred design (HCD) approach to analyse perceptions of the quality of perinatal care across two low resource settings: Ethiopia and Bangladesh. Using engagement and assessment tools, we conducted interviews, focus groups, facility walk-throughs, co-design workshops, and infrastructural assessments with patients, companions, providers, and Ministry of Health representatives. Descriptive statistics and thematic analysis were used to identify key learnings and develop recommendations. Across both countries, participants identified the need for facility layouts that better support privacy, mobility during labour, alternative birth positions, companion involvement, cultural and religious practices, sanitation, and provider visibility. Based on these insights, we developed six recommendations to better align health facility infrastructure with maternal and newborn care delivery needs. Our findings suggest that investments in health facility infrastructure may improve care experiences and help enable respectful, safe, and evidence-based maternal and newborn care. Alongside targeted spatial improvements, government authorities responsible for health facility planning should incorporate participatory design processes to ensure infrastructure reflects the needs of patients, companions, and providers and supports high-quality care delivery.

15.
arXiv (CS.LG) 2026-06-19

Model soups need only one ingredient

arXiv:2602.09689v2 Announce Type: replace Abstract: Fine-tuning large pre-trained models on a target distribution often improves in-distribution (ID) accuracy, but at the cost of out-of-distribution (OOD) robustness as representations specialize to the fine-tuning data. Weight-space ensembling methods, such as Model Soups, mitigate this effect by averaging multiple checkpoints, but they are computationally prohibitive, requiring the training and storage of dozens of fine-tuned models. In this paper, we introduce MonoSoup, a simple, data-free, hyperparameter-free, post-hoc method that achieves a strong ID-OOD balance using only a single checkpoint. Our method applies Singular Value Decomposition (SVD) to each layer's update and decomposes it into high-energy directions that capture task-specific adaptation and low-energy directions that introduce noise but may still encode residual signals useful for robustness. MonoSoup then uses entropy-based effective rank to automatically re-weigh these components with layer-wise coefficients that account for the spectral and geometric structure of the model. Experiments on CLIP models fine-tuned on ImageNet and evaluated under natural distribution shifts, as well as on Qwen language models tested on mathematical reasoning and multiple-choice benchmarks, show that this plug-and-play approach is a practical and effective alternative to multi-checkpoint methods, retaining much of their benefits without their computational overhead.

16.
arXiv (CS.CV) 2026-06-11

UI2Code^N: UI-to-Code Generation as Interactive Visual Optimization

UI-to-code aims to translate UI screenshots into executable front-end code. Despite progress with vision-language models (VLMs), most existing methods formulate UI-to-code as a single-pass generation, which mismatches real-world UI development that is inherently iterative and feedback-driven. We reformulate UI-to-code as an interactive visual optimization problem, where code generation is embedded in a closed-loop process of execution, visual inspection, and iterative refinement driven by rendered visual feedback. To address the non-differentiability of visual objectives and the noise of absolute visual evaluators, we propose Relative Visual Policy Optimization (RVPO), a preference-based reinforcement learning method that optimizes relative visual rankings among rendered candidates under execution feedback. We instantiate this paradigm in UI2Code^N, an open-source 9B model trained via continual pre-training, supervised fine-tuning, and reinforcement learning. Experiments demonstrate state-of-the-art performance on UI drafting, UI polishing, and UI editing benchmarks, even outperforming larger models, with performance consistently improving through iterative visual optimization. Our code and models are available at https://github.com/zai-org/UI2Code_N.

17.
arXiv (CS.CL) 2026-06-18

Lost in a Single Vector: Improving Long-Document Retrieval with Chunk Evidence Aggregation

Dense retrieval ranks one query vector against one document vector. On long documents, this interface can fail when a short but decisive span is weakened during document encoding before ranking. We study this failure mode as document-side early compression and introduce the Evidence Dilution Index (EDI) to measure how far a document-level representation falls below the strongest chunk-level evidence within the same gold document. Guided by this view, we propose DICE (Document Inference via Chunk Evidence), a training-free document-side strategy that splits documents into chunks, encodes them independently with a frozen model, and aggregates them back into a single vector while preserving the standard one-query-one-document interface. On LongEmbed, DICE improves retrieval across four backbones, with the largest gains on slices beyond 4k tokens: for Dream, Passkey >4k rises from 30.0 to 90.0 and Needle >4k from 23.3 to 74.0. Across 12,779 filtered samples, DICE yields lower EDI than the single-vector baseline in 92.8% of cases. These results establish document-level encoding as a practical and underexplored lever for long-document retrieval.

19.
arXiv (math.PR) 2026-06-17

Limit theorems for descents and inversions of shelf-shuffles

arXiv:2510.00343v2 Announce Type: replace Abstract: We prove central limit theorems for the number of descents and inversions of permutations produced by shelf-shuffles. These are a model for casino card shuffling machines. We show the asymptotic normality of the number of descents in two limiting regimes depending on the ratio of cards to shelves. On the other hand, we study the inversions by employing a modification of the techniques from Islak's analysis of the statistics of riffle shuffles. In particular, we obtain a bound for the rate of convergence for inversions that is independent of the number of shelves.

20.
arXiv (CS.CL) 2026-06-15

Harsher on Male? Evaluating LLMs on Gender-Asymmetric Moral Framing Across Diverse Conflict Scenarios

Existing studies on gender bias in LLMs have largely focused on stereotypes, occupational associations, or explicit harmful outputs. In this work, we ask whether LLMs apply consistent response standards to the same negative behavior under matched male-actor and female-actor conditions. We introduce GAMA-Bench, a gender-mirrored benchmark of 1,298 scenarios covering intimate relationship and public social conflicts. It constructs gender-neutral misconduct templates through controlled grids and cross-model review, then compiles them into paired first-person prompts with matched actor-gender and role-reference variations. We further design a structured response-framing protocol to measure how models allocate punishment, empathy, escalation, instruction, and blame. Experiments on 10 representative LLMs reveal a consistent male-disadvantaging asymmetry: male actors receive more punitive, escalatory, and blame-centered framing, whereas female actors receive more therapeutic and empathy-oriented framing for the same misconduct. Further analyses show that this pattern persists across model families, scenario tracks, model scale, and explicit thinking-style reasoning. The official code is available at https://github.com/xufeiqiong/GAMA-Bench.

21.
arXiv (CS.CV) 2026-06-11

Frozen Multimodal Embeddings for Personality and Cognitive Ability Assessment in Asynchronous Video Interviews

Predicting psychological traits from asynchronous video interviews (AVIs) is a challenging multimodal learning problem because labeled datasets are limited while each response contains high-dimensional visual, acoustic, and verbal signals. This paper presents our solution for the ACM Multimedia AVI Challenge 2026, which evaluates two tasks: Track~1 predicts self-reported HEXACO personality traits from personality-related interview responses, and Track~2 classifies cognitive ability levels from structured AVI responses. We treat the problem as a small-sample representation learning task. Instead of fine-tuning large pretrained models, we use frozen multimodal encoders, including CLIP for visual features, Whisper for acoustic features and transcripts, and RoBERTa, E5, and DeBERTaV3 for textual representations, followed by low-capacity downstream models. For Track~1, our trait-specific regression and late-fusion system achieves an average validation MSE of 0.2696, improving over the official baseline of 0.3334. Ablation results show a three-step improvement from a global model (0.3189), to per-trait modeling (0.2871), to per-trait late fusion (0.2696), corresponding to a 19.1\% relative MSE reduction over the official baseline. For Track~2, a compact subject-attribute baseline reaches 0.5781 accuracy, while our multimodal ensemble reaches 0.5313, both above the official baseline of 0.4062. We interpret this result as evidence of possible subject-attribute shortcuts in the validation split rather than robust cognitive inference from AVI content. Overall, our findings suggest that AVI-based psychological assessment benefits from trait-specific multimodal modeling, but cognitive ability prediction requires careful control of dataset shortcuts.

22.
arXiv (CS.AI) 2026-06-17

LongWebBench: Evaluating Structural and Functional Webpage Generation in Long-Horizon Settings

arXiv:2606.17727v1 Announce Type: new Abstract: Recent vision-language models (VLMs) have shown promising progress in generating webpages from visual inputs, yet existing evaluations mainly focus on short, single-screen, and largely static webpages. We introduce LongWebBench, a benchmark for evaluating long-horizon webpage generation from both structural and functional perspectives. LongWebBench contains 490 real-world long webpages for structural fidelity evaluation and 507 goal-oriented interaction tasks over 129 webpages for functional evaluation. It employs two complementary protocols: a multi-dimensional VLM-based metric for assessing long-range structural coherence, and a DOM-augmented agent-based pipeline for end-to-end functional verification. We further examine the automatic evaluation protocols through human agreement analysis. Experiments with state-of-the-art open-source and proprietary VLMs under single-image and multi-image settings reveal that structural fidelity degrades as webpage length increases, while visually plausible generations often fail to support executable multi-step interactions. These results highlight the need to evaluate long webpage generation beyond visual similarity, with executable interaction as a core criterion. Our code and data are available at https://github.com/zheny2751-dotcom/LongWebBench.

23.
arXiv (CS.AI) 2026-06-19

The Algorithmic-Human Manager: AI, Apps, and Workers in the Indian Gig Economy

arXiv:2606.19975v1 Announce Type: cross Abstract: This paper examines the impact of artificial intelligence and digital technologies on the blue-collar gig economy in India, focusing on algorithmic management. This paper examines the impact of artificial intelligence and digital technologies on the blue collar gig economy in India, focusing on algorithmic management he use of automated systems to allocate, monitor, and evaluate work in location-based services such as ride sharing and delivery. Using a social justice framework and a mixed-methods approach comprising interviews with 16 gig workers and 21 key stakeholders, the study uncovers a dual reality: while AI-powered systems expand access to work and generate operational efficiencies, they simultaneously introduce significant challenges related to fairness, transparency, and worker dignity. Key findings reveal that algorithmic systems are opaque by design, produce inequitable outcomes, and are not structured to reward additional labour with proportionate pay. The study advocates for a pragmatic hybrid governance model an Algorithmic Human Manager framework in which technological efficiency and human accountability operate together rather than in opposition. The findings carry implications for policymakers, platform companies, and civil society organizations working to design equitable AI governance frameworks for the gig economy in India and across the Global South.

24.
arXiv (CS.LG) 2026-06-16

Concrete Subspace Learning based Interference Elimination for Multi-task Model Fusion

arXiv:2312.06173v2 Announce Type: replace Abstract: Merging models fine-tuned from a common, extensively pre-trained large model but specialized for different tasks has been demonstrated as a cheap and scalable strategy to construct a multi-task model that performs well across diverse tasks. Recent research, exemplified by task arithmetic, highlights that this multi-task model can be derived through arithmetic operations on task vectors. Nevertheless, current merging techniques frequently resolve potential conflicts among parameters from task-specific models by evaluating individual attributes, such as the parameters' magnitude or sign, overlooking their collective impact on the overall functionality of the model. In this work, we propose the CONtinuous relaxation of disCRETE (Concrete) subspace learning method to identify a common low-dimensional subspace and utilize its shared information to track the interference problem without sacrificing much performance. Specifically, we model the problem as a bi-level optimization problem and introduce a meta-learning framework to find the Concrete subspace mask through gradient-based techniques. At the upper level, we focus on learning a shared Concrete mask to identify the subspace, while at the inner level, model merging is performed to maximize the performance of the merged model. We conduct extensive experiments on both vision domain and language domain, and the results demonstrate the effectiveness of our method. The code is available at https://github.com/tanganke/subspace_fusion

25.
arXiv (CS.CV) 2026-06-16

ReportQA: QA-Based Radiology Report Evaluation

Radiology report evaluation is essential for advancing automated report generation. Natural language generation metrics have limited clinical relevance. Clinical efficacy (CE) metrics evaluate important medical findings, but focus mainly on presence and cover only a limited set of entities. Due to heavy reliance on manual annotations, it is difficult for CE metrics to extend clinical entities or attributes. In clinical practice, radiology reports serve as a medium for information transfer. Clinicians use them to perform downstream diagnostic tasks without directly inspecting images. Based on this insight, we propose ReportQA, a clinical-related and flexible radiology report evaluation framework, supporting detailed quantitative analysis of radiology report generation systems. We first collect datasets covering multiple imaging modalities and anatomical regions. We then construct knowledge trees of clinical entities and attributes with radiologist guidance, and use large language models (LLMs) to extract structured information from raw reports. Next, we generate QA pairs from predefined templates and apply quality control through self-filtering and report-based filtering. During evaluation, the report is treated as context, and an LLM acts as a judge model to answer the QA pairs. Based on the resulting QA accuracy, we introduce QAScore metric. Compared with existing metrics, QAScore shows better alignment with radiologist judgments. Experiments on multiple state-of-the-art vision-language models reveal that current report-based inference paradigms struggle to learn fine-grained clinical representations and exhibit strong negative prior biases. In contrast, question-driven inference provides a more effective alternative. For reproducibility and extensibility, we release the knowledge trees, structured reports, and QA pairs, along with the pipeline code for QA construction and evaluation.