Five winning images of scientists at work
该条目无摘要(多为勘误、社论或新闻类内容,出版方未提供摘要)
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
该条目无摘要(多为勘误、社论或新闻类内容,出版方未提供摘要)
arXiv:2605.22845v2 Announce Type: replace-cross Abstract: Explicit dynamic finite element (FE) simulations are widely used for large deformation engineering analysis, but repeated simulations remain costly during design space exploration and optimisation. In explicit FE analysis, nodal kinematics and element level deformation measures evolve through coupled node element updates. This motivates graph learned simulators that approximate one step FE state transitions and roll them out autoregressively. However, many mesh based graph surrogates are node centred, which makes element level variables and native nodal elemental exchange less direct to represent. This work proposes CAttBiGNN, a cross attention based bipartite graph neural network for coupled nodal elemental learning. The graph represents FE mesh nodes and elements as distinct entities linked by directed node element edges, enabling nodal displacement increments and element level deformation states to be predicted on their native discretisation domains. An edge aware cross attention processor uses geometric edge embeddings to modulate directional node element message passing. For larger graphs, CAttBiUGNN combines the bipartite processor with graph downsampling and upsampling to improve long-range information propagation. The method is evaluated on dome shaped cold forming and corner shaped hot forming benchmarks. Comparisons with node centred baselines and bipartite and attention ablations show improved accuracy and balance in nodal displacement and elemental thinning prediction during autoregressive rollout. The results indicate that the proposed finite element inspired learned simulator can support manufacturability oriented field prediction and efficient design space exploration in large deformation sheet material forming.
arXiv:2603.08505v2 Announce Type: replace-cross Abstract: Electrocardiography (ECG) is a low-cost, widely used modality for diagnosing electrical abnormalities like atrial fibrillation by capturing the heart's electrical activity. However, it cannot directly measure cardiac morphological phenotypes, such as left ventricular ejection fraction (LVEF), which typically require echocardiography (Echo). Predicting these phenotypes from ECG would enable early, accessible health screening. Existing self-supervised methods suffer from a representational mismatch by aligning ECGs to single-view Echos, which only capture local, spatially restricted anatomical snapshots. To address this, we propose Echo2ECG, a multimodal self-supervised learning framework that enriches ECG representations with the heart's morphological structure captured in multi-view Echos. We evaluate Echo2ECG as an ECG feature extractor on two clinically relevant tasks that fundamentally require morphological information: (1) classification of structural cardiac phenotypes across three datasets, and (2) retrieval of Echo studies with similar morphological characteristics using ECG queries. Our extracted ECG representations consistently outperform those of state-of-the-art unimodal and multimodal baselines across both tasks, despite being 18x smaller than the largest baseline. These results demonstrate that Echo2ECG is a robust, powerful ECG feature extractor. Our code is accessible at https://github.com/michelleespranita/Echo2ECG.
We present Akasha 2, a state-of-the-art multimodal architecture that integrates Hamiltonian State Space Duality (H-SSD) with Visual-Language Joint Embedding Predictive Architecture (VL-JEPA). The system leverages the Mamba-3 Selective State Space Model (SSM) augmented by a Sparse Mixture of Hamiltonian Experts (SMoE-HE) that enforces latent physical conservation laws through symplectic integration. For visual synthesis, we introduce Hamiltonian Flow Matching (HFM) and persistent 3D Gaussian Splatting (3DGS), enabling ultra-low latency (
We present Double-Helix Vision (DH), a geometry-based visual sampler that compresses 2D images into compact 1D signals using paired golden-ratio-inspired spiral trajectories. Rather than processing every pixel uniformly, DH employs two phase-shifted helices (Alpha and Beta, offset by 180 degrees) to sample the image with biologically-inspired foveation: high density at the center, sparse coverage at the periphery. At 4K resolution, DH achieves a 1,433x compression ratio (99.93% reduction) while preserving the geometric structure of the scene. The full perception pipeline – including spatial mapping, temporal collision detection, and intra-frame structural disparity estimation – runs in 0.52 ms at 1080p on CPU-only hardware, with no neural network dependencies. On CIFAR-10 at extreme sampling budgets (K=128 points per helix), DH achieves a +6.03% accuracy gain over uniform random sampling. A JSON-serializable Robotics API is provided, delivering sub-millisecond spatial perception reports in 2.7 KB packets. Code and benchmarks are available under the MIT License.
Action-conditioned world models have emerged as a promising paradigm for robot learning, offering a scalable alternative to costly real-world experimentation by generating action-consistent video rollouts. However, persistent world modeling remains challenging in manipulation: frequent end-effector occlusions and rapid wrist-camera motion make the current observation insufficient for predicting future views, causing models to forget or hallucinate scene details seen in earlier frames. Existing memory retrieval strategies often fail to identify informative history in dynamic manipulation scenarios. To address this limitation, we propose Mem-World, a memory-augmented multi-view action-conditioned world model. At its core, we present W-VMem, a 4D wrist-view-centered surfel-indexed memory that anchors historical observations to temporally evolving surface elements. By explicitly modeling when and where scene elements are observed, W-VMem enables geometry-aware retrieval of relevant history frames conditioned on future actions. During generation, relevant history frames are selected via surfel-based rendering and scoring, providing informative and non-redundant context for prediction. Extensive experiments show that Mem-World generates persistent rollouts in complex manipulation scenarios, enables more reliable policy evaluation than Ctrl-World, improving the Pearson correlation with real-world performance by 14.5\%, and supports effective policy improvement through synthetic data generation, increasing success rates from 58\% to 72\% on long-horizon tasks.
arXiv:2606.16013v1 Announce Type: cross Abstract: Interpreting machine-learning models has attracted increasing attention, particularly in the physical sciences, where one often seeks to understand the underlying mechanisms rather than merely make predictions. Multiple linear regression is often regarded as an interpretable alternative to more complex models, such as deep neural networks, because its predictions are expressed as explicit weighted sums of input features. However, when input features are strongly correlated, namely in the presence of multicollinearity, the learned weights can exhibit large dataset-to-dataset fluctuations and oscillatory behavior across physically similar features, making their interpretation difficult or even impossible. Although the instability of the weights under multicollinearity is well known in statistics, its consequences for physical interpretation, in particular its connection to oscillatory weights across physically similar features, have not been systematically clarified. Here, we theoretically discuss the mechanism behind this loss of interpretability by analyzing the eigenmodes of the feature correlation matrix. We show that small-eigenvalue modes associated with multicollinearity amplify fluctuations in the weights and generate oscillatory patterns that do not necessarily reflect meaningful contributions. We test this theoretical picture numerically on physics datasets and show that Ridge regularization suppresses these unstable modes, although the resulting weights must still be interpreted with caution. We further confirm the generality of our findings beyond physics by analyzing a diverse collection of publicly available datasets. Our results clarify why, in the presence of multicollinearity, physical interpretation can remain difficult even for linear regression models.
by Cillian Hourican, Geeske Peeters, René J. F. Melis, Almar Kok, Natasja M. van Schoor, Sandra Wezeman, Mike Lees, Marcel G. M. Olde Rikkert, Rick Quax In the context of multimorbidity, clinical features seldom act in isolation: symptoms, signs and behaviours form interdependent systems in which joint effects on function can be demonstrated only when features are considered together. We introduce an open, reusable workflow that detects and interprets these “together-only” interactions using bivariate Partial Information Decomposition (PID; two sources to one target), linking synergy-based dependence to the broader network of clinical variables rather than to a single target. The workflow estimates synergy with small-sample bias correction and summarises each pair in a Breadth–Uniformity–Synergy–Total (BUST) map: breadth of synergy across target variables (broad “generalist” vs narrow “specialist” patterns), cross-stratum uniformity across age, sex and multimorbidity (uniform vs subgroup-specific), synergy strength, and total shared information. Simple diagnostics contrast observed targets with additive expectations, revealing the specific joint configurations through which non-additive effects arise. Applied to data from the Longitudinal Ageing Study Amsterdam, we treated all health-related variables—covering symptoms, clinical signs, behaviours, lifestyle factors, and self-rated health indicators—as both sources and targets in the PID framework. This symmetric design permits synergy to be quantified for every pair of variables with respect to every other variable. The workflow identifies synergistic constellations that additive models miss. Multidomain cliques involving subjective health, pain, cognition and grip strength showed multiple non-additive configurations, whereas pairs such as alcohol use with grip strength exhibited focused, narrow but uniform synergy. Notably, the pairs with the strongest synergistic contributions were largely distinct from those with the highest total mutual information, indicating that synergy captures dependency structure overlooked by conventional association measures. Rather than a new measure, this work provides a bias-aware workflow that makes higher-order dependence visible and transferable. Our results support synergy-aware mapping as a practical complement to conventional multimorbidity analyses: it highlights specific combinations of routinely assessed features whose joint states may be especially informative across multiple health targets and therefore candidates for prioritised joint assessment and future multi-domain intervention studies.
Motivation: Reference genome composition determines which taxa a profiling pipeline can detect and distinguish, and becomes of critical importance for high-resolution profiling where taxonomic boundaries begin to blur. Existing selection tools optimize within-taxon representativeness but disregard discrimination across taxa, leaving open whether explicitly accounting for inter-taxon discrimination during selection improves profiling. Results: Here we present ReSeT, a facility-location-based reference genome selection tool that operates on arbitrary pairwise distance matrices, extended with a tunable inter-taxon discrimination term and per-genome selection cost, and solved by local search. We benchmark ReSeT against established selection methods on three viral datasets spanning varying degrees of taxonomic ambiguity. On the high-ambiguity SARS-CoV-2 datasets, appropriately tuned ReSeT selections matched or exceeded the strongest alternatives in terms of profiling accuracy, whereas on the low ambiguity IAV dataset VSEARCH remained dominant. Interestingly, we find that the novel inter-taxon discrimination term contributed weakly, indicating that ReSeT's facility-location formulation and selection cost drives ReSeT's performance. We further propose a novel taxonomic ambiguity index, computable from ReSeT's inputs, that summarizes the taxonomic ambiguity of reference genomes and aligns with where ReSeT improves over existing selection methods. Availability and implementation: ReSeT is implemented in Python ([≥]3.10) and is freely available under the MIT license. The source code is available on GitHub at https://github.com/JaspervB-tud/ReSeT and ReSeT can also be installed directly from the Python Package Index (PyPI) via pip install reset-bio.
Background and Purpose: Walking after stroke is often characterized by persistent biomechanical impairments and reduced walking capacity. While visual biofeedback can improve gait mechanics and fast walking can enhance capacity, it is unclear whether individuals post-stroke can effectively use biofeedback at higher walking speeds to address both deficits simultaneously. This study examined the effects of walking speed on the ability of participants with chronic stroke to reduce step length (SL) errors using visual biofeedback. Methods: Sixteen individuals with chronic stroke walked on a treadmill at slow, self-selected, and fast speeds with and without visual SL biofeedback. Absolute SL error relative to individualized targets was calculated for paretic and non-paretic limbs. Linear mixed-effects models with piecewise linear splines assessed the effects of speed, limb, and feedback condition. Post hoc comparisons were performed for significant interactions. Results: At lower speeds, increasing speed reduced SL error in both limbs (p < 0.001). At higher speeds, the effects of speed were dependent on limb and condition (p < 0.001). Paretic SL error increased with speed without feedback but remained stable with feedback (p < 0.001). Non-paretic SL error decreased with speed regardless of condition. SL error was greater in the paretic limb overall (p < 0.001). Discussion and Conclusions: Fast walking alone did not reduce paretic SL errors. Participants with chronic stroke can effectively use visual biofeedback to reduce paretic SL errors at higher speeds, supporting its integration into high-intensity gait training to simultaneously treat biomechanical impairments and walking capacity deficits after stroke.
Decoding visual experience from brain activity has advanced substantially, but current brain-to-text systems largely recover semantic content while discarding affect. Additionally, language models can generate emotional text when prompted with categorical labels, but such labels collapse rich inter-subject variability into coarse discrete bins. We present EmoMind, the first end-to-end pipeline for decoding affective captions directly from fMRI signals. EmoMind first retrieves a semantically grounded neutral scene description from brain-decoded visual features, then rewrites it using a continuous 34-dimensional emotion vector decoded from the same fMRI recording. To control the balance between content preservation and affective expression, we train the rewriter with classifier-free guidance against an identity-preserving null branch, enabling smooth interpolation between semantic fidelity and affective expressivity. We evaluate affective caption generation with a three-axis validation framework spanning subject-specificity, structural geometry, and causal control. We further augment this framework with a synthetic-brain substitution test that probes robustness to the measurement apparatus, and we benchmark each axis against GPT-4 prompted with brain-decoded top-5 emotion labels as a strong discrete baseline. Across two independent emotion fMRI datasets, EmoMind significantly outperforms label-prompted GPT-4 on all three axes, with the largest gains on metrics that require person-specific affective structure rather than population-level emotion aggregation. These results establish continuous brain-decoded affect as a viable control signal for individualized affective caption generation and open new directions for studying individual affective brain organisation.
Recent multimodal large language models (MLLMs) have shown promising performance on video quality assessment (VQA) tasks. However, adapting them to new scenarios remains expensive due to large-scale retraining and costly mean opinion score (MOS) annotations. In this paper, we argue that a pretrained MLLM already provides a useful perceptual prior for VQA, and that the main challenge is to efficiently calibrate this prior to the target MOS space. Based on this insight, we propose DPC-VQA, a decoupling perception and calibration framework for video quality assessment. Specifically, DPC-VQA uses a frozen MLLM to provide a base quality estimate and perceptual prior, and employs a lightweight calibration branch to predict a residual correction for target-scenario adaptation. This design avoids costly end-to-end retraining while maintaining reliable performance with lower training and data costs. Extensive experiments on both user-generated content (UGC) and AI-generated content (AIGC) benchmarks show that DPC-VQA achieves competitive performance against representative baselines, while using less than 2% of the trainable parameters of conventional MLLM-based VQA methods and remaining effective with only 20% of MOS labels. The code will be released upon publication.
Human perception of visual scenes is inherently temporal. We instinctively recognise whether a fruit is ripening or rotting, whether construction is progressing or being demolished, and approximately how much time separates two photographs of the same subject. Whether large vision-language models (VLMs) share this competence remains an open and practically important question. We introduce CHRONOSIGHT, a rigorously controlled benchmark evaluating five dimensions of visual temporal reasoning: CHRONORANK (chronological ordering of image sequences), CHRONOLOCATE (ordinal stage localisation from a single image), CHRONODELTA (estimation of time elapsed between two images on a logarithmic scale), CHRONOREVERSE (detection of temporally reversed sequences), and CHRONOODD (identification of a temporal outlier within a set). The benchmark comprises 1{,}000 items across eight process families (biological growth, food transformation, physical weathering, construction, environmental change, human ageing, astronomical phenomena, and urban dynamics) spanning timescales from minutes to millennia. We evaluate eight open-source VLMs (500 M to 19 B parameters) under two prompting regimes and collect human performance baselines. Human performance averages 0.89 across tasks; the best open model (Qwen2.5-VL-7B) reaches 0.40 under direct prompting, a gap we term chronological blindness. Lightweight LoRA fine-tuning on 151 examples raises CHRONODELTA accuracy from near-zero to 0.43, transferring zero-shot to related tasks (CHRONOODD: 0.37; CHRONOREVERSE: 0.64)suggesting the bottleneck is partly instruction following rather than visual perception. Benchmark, code, and predictions will be released upon acceptance.
Single-cell RNA sequencing (scRNA-seq) maps aging tissues at high resolution but is destructive, preventing longitudinal tracking; dropout and zero-inflation artifacts, amplified by shift-invariant linear simulations, confound age-associated variability. We developed GeroEngine, a technical-artifact-aware framework combining VAE-based trajectory simulation, LOPO cross-validation, linear baselines, reverse traversal, and reverse-directed network inference. In microglia and HSCs, the VAE reduced technical-artifact carryover while preserving trajectory heterogeneity and improving alignment to artifact-reduced reference manifolds. Consensus GeroTargets and GeroRegulators defined tissue-specific GeroNetworks organized into three pillars: lineage/replication identity collapse, a sex-dimorphic endocrine/stress core, and inflammatory remodeling. Forward and reverse simulations aligned to the common young[->]old aging axis revealed a sign-coherent, direction-specific program: identity/replication targets were bidirectionally recovered, whereas MHC/NF-{kappa}B inflammatory programs were preferentially forward-recovered. These results support identity collapse as a deep traversable core of aging and nominate upstream homeostatic restoration over downstream inflammatory suppression.
Creating 3D visual illusions, a single 3D mesh that reveals entirely different semantics from various viewing angles, is a fascinating but tough challenge. Existing optimization-based methods are slow and can produce oversaturated colors. In contrast, naive stitching approaches fail to produce geometrically coherent objects. This results in visible unnatural seams and semantic leaks. In this paper, we present a fast and training-free framework for generating text-driven 3D visual illusions. Our approach decouples the generation into two stages. First, we propose a cross-space dual-branch denoising process. This process dynamically decodes 3D latents into voxel space for CLIP-guided orientation alignment and Signed Distance Field (SDF) blending, which ensures seamless geometric fusion. Second, we introduce a view-conditioned texture synthesis module that projects and aggregates view-specific 2D diffusion priors onto the fused geometry. Extensive experiments demonstrate that our method generates highly realistic, dual-semantic 3D illusions in just 3-5 minutes. It significantly outperforms existing methods in geometric integrity, semantic recognizability, and efficiency. Project page: https://siang1105.github.io/JanusMesh.github.io/
Background: Suicide is the second leading cause of death in US adolescents aged 10-24. Method use strongly influences lethality and design of prevention strategies, but recent trends remain unclear. We therefore aimed to investigate trends in suicide mortality rates by method, age group, and sex. Methods: This cross-sectional study used suicide mortality data from the National Center for Health Statistics for a quarter-century period, between 1999 and 2024. All individuals aged 10-24 years at the time of death, with suicide as the underlying cause, were included. We estimated suicide mortality rates (i.e., the number of suicide deaths per 100,000 people) and annual percent change by method (firearm, asphyxiation, poisoning, other), age group (10-14, 15-19, 20-24), and sex. Changing trend time points were determined using Joinpoint regression models Results: From 1999 to 2024, 159,241 suicide deaths occurred among individuals aged 10-24. While suicide rates declined across all age groups between 2017 and 2024, the male-to-female gap narrowed by 18.9%. Among 10-14-year-olds, declining rates among males masked a consistent increase in female suicide rates since 2011. Although asphyxiation-related suicides decreased across all groups since 2018, firearm suicide rates increased for females in the 10-14 and 20-24 age groups. Albeit not as common as firearms or asphyxiation, poisoning suicide rates increased in the 15-19 and 20-24 age groups. Since 1999, suicide rates by other less common methods (e.g., jumping) showed significant increases, for both sexes, especially among individuals aged 20-24. Suicide rates were consistently highest in the 20-24 age group across all study years. Conclusion: The decrease in suicide mortality rates among individuals aged 10-24 was largely driven by declines in males and reductions in asphyxiation-related suicides. However, increasing female suicide rates in the 10-14 age group, as well as increasing rates of death by less common means, warrant close attention. While suicide prevention efforts like structural interventions and means restriction have shown effectiveness among male adolescents, priority should now be given to adapting these approaches for female adolescents, particularly those aged 10-14.
arXiv:2501.08561v4 Announce Type: replace Abstract: Digital twins are increasingly used to monitor and optimize industrial systems, yet many existing frameworks remain difficult to interpret, slow to adapt, and limited in their ability to incorporate explicit domain knowledge. This paper presents ANSR-DT, an adaptive neuro-symbolic framework that unifies temporal anomaly detection, symbolic reasoning, and reinforcement-learning-based decision support within a single digital twin pipeline. ANSR-DT combines a CNN-LSTM model for multivariate pattern recognition with Prolog-based reasoning that converts learned signals into explicit rules, enabling transparent diagnoses and traceable decision paths. A PPO-based adaptation layer further refines operational responses under changing conditions while preserving interpretability. Experiments against 8 baselines show that ANSR-DT delivers competitive predictive performance together with stable rule extraction, scalable symbolic reasoning, and actionable explanations. Additional validation on the Skoltech Anomaly Benchmark (SKAB) further indicates that the framework transfers beyond synthetic settings. These findings position ANSR-DT as a practical foundation for trustworthy, adaptive, and explainable industrial digital twins.
arXiv:2606.19375v1 Announce Type: new Abstract: Identifying anisotropic yield functions remains challenging since yielding is not directly observed in full-field mechanical measurements, directional calibration can require many loading directions, and selecting an appropriate analytical form is nontrivial. This study proposes a physics-informed framework for discovering yield functions from full-field displacement data and reaction force data, without stress observations, plastic strain measurements, direct yield surface data, or a prescribed parametric yield function. The framework identifies the yield function as a mechanically constrained constitutive component inside elastoplastic stress integration, rather than through direct stress-space supervision. The yield function is represented by a convex neural network that enforces convexity and positive homogeneity of degree one while imposing the assumed tension-compression symmetry, and this neural yield function is trained with a differentiable stress update and a physics-informed force equilibrium loss across multiple loading cases. The proposed framework is validated using finite element (FE) benchmark studies with von Mises, Hill 1948, and Yld2000-2d yield functions, assessing yield contour agreement, displacement-noise sensitivity, identifiability through plastically active stress states, epistemic uncertainty, and polynomial-surrogate deployment. This study provides a mechanics-constrained pathway for discovering anisotropic yield functions from displacement and force data while keeping the identified component within the structure of elastoplastic stress integration.
Current evaluations of large language models (LLMs) rely heavily on a growing collection of benchmarks and on aggregate benchmark scores, yet it remains unclear what this comparison actually captures, and what these scores reveal about models' underlying capabilities. Here, we propose a new paradigm for LLM evaluation, by asking whether benchmark performance reflects many independent abilities, or rather relies on a small number of shared dimensions. To answer this, we apply Factor Analysis (FA) to a massive performance matrix of LLMs versus benchmarks \((60\times44)\) revealing an intrinsically low-rank structure of that matrix. That is, a small number of latent factors captures most of the structure in the full task space. This low-rank geometry reveals substantial redundancy across existing tasks and explains why many benchmarks appear to be measuring overlapping abilities. We further show that these latent factors correspond to coherent, skill-like, dimensions of LLM behavior. Leveraging this latent skill-space, we deliver three practical tools for LLM evaluation and downstream users: (i)~identifying redundant tasks, (ii)~profiling new models using a small subset of tasks, and (iii)~selecting models aligned with desired skill profiles. Our method provides a solid alternative to the de-facto standard of a single aggregate score, and establishes an interpretable and practical framework for understanding and benchmarking LLM core capabilities.
Visual Text Comprehension (VTC) renders text into images for a vision-language model (VLM) to read, sidestepping LLM context-window limits and powering applications from long-page OCR to multi-page memory QA. Yet existing VTC pipelines treat rendering and layout as a fixed, content-agnostic preprocessing step and offer little mechanistic understanding of how VLMs internally process visualized text. Through a focused empirical study on VTC QA tasks, we reveal that VLMs exhibit a localization-without-utilization regime: evidence-localizing attention emerges sharply in the middle-to-late layers and is largely decoupled from answer correctness, yet simply enlarging the localized spans on the rendered page recovers a large fraction of the failures. Building on these observations, we propose AGAR (Attention-Guided Adaptive Rendering), a training-free, model-agnostic method that leverages a VLM's own middle-to-late layer attention to identify the top-K important visual patches, maps them back to word spans, and re-renders the page with those spans enlarged before re-inferring the answer. Extensive experiments across nine VTC benchmarks (short-form, long-context, and multi-page memory QA) and four VLM backbones show that AGAR (i)consistently improves off-the-shelf VLMs as a plug-and-play enhancement, (ii)composes with VLM post-training to yield further gains, and (iii)remains robust under both visual- and text-side input degradation.
We present a systematic stress-test of geometric metrics for LLM evaluation. Rank-based geometric properties of internal representations have shown promise as reference-free quality signals, but the conditions under which they are reliable remain unclear. We evaluate eight commonly-used metrics: intrinsic-dimensionality estimators, spectral norms, and related quantities across six tester models (0.5-8B) and eight generators on contrasting tasks, separating genuine geometric signal from text-length effects and from what standard text statistics already capture. Three findings emerge. First, some metrics (notably Schatten Norm and MOM) mainly reflect output length, and their apparent discriminative power collapses once length is controlled. Second, geometric metrics add modest but real information beyond text statistics: combined with them, a classifier reaches 78% accuracy on 6-way generator identification versus 69% for text statistics alone. Third, rather than tracking a general notion of text quality, the metrics demonstrate only moderate association between the intrinsic-dimensionality and lexical diversity (RTTR). We give use-case-specific recommendations and identify failure detection as the most promising near-term application.
As LLM-based shopping agents enter production, existing benchmarks fail to capture how a shopper's requirements arrive: stated implicitly in the query, recorded in a profile, or revealed only when the right question is asked. Benchmarks that expose full intent upfront and grade only the final choice can neither pose this long-horizon challenge nor explain which requirement an agent missed. To address this gap, we introduce EComAgentBench, a benchmark of 662 tasks grounded in real Amazon products and reviews. Each task scatters these requirements across a visible query, a tool-gated profile, and scripted clarification; an agent must uncover hidden intent, verify candidates against attributes and review evidence, and commit to a single product within 100 tool calls. Moreover, typed, source-tagged rubrics grade every task, attributing each failure to a requirement and its source. Construction is automated yet reliable, with every answer fixed in code before any text is generated and every sample validated. Our evaluation of seven models reveals that even the strongest attains only 57.1% overall accuracy, and rubric satisfaction degrades from visible to hidden sources. Overall, we believe EComAgentBench will serve as a reproducible foundation for moving shopping agents from single-query search toward dependable assistance over long horizons.
arXiv:2602.23006v2 Announce Type: replace-cross Abstract: Simulating a Gaussian process requires sampling from a high-dimensional Gaussian distribution, which scales cubically with the number of sample locations. Spectral methods address this challenge by exploiting the Fourier representation and treating the spectral density as a probability distribution suitable for Monte Carlo approximation. Although this probabilistic interpretation is valid for stationary processes, it is overly restrictive for the nonstationary case, where spectral densities are generally not probability measures. We propose regular Fourier features for harmonizable processes to avoid this limitation. Our method discretizes the spectral representation directly, preserving the correlation structure among spectral weights without requiring probability assumptions. Under a finite-spectral-support assumption, this yields an efficient low-rank approximation that is consistent and positive semi-definite by construction. When the spectral density is unknown, the framework extends naturally to kernel learning from data. We demonstrate the method on locally stationary and harmonizable mixture kernels, the latter with a complex-valued spectral density, and apply the kernel-learning extension to real and synthetic data.
Unlearning aims to remove the influence of specific training data sources, but this has proved challenging because the contributions of different sources are entangled within the model. Isolating source contributions to disjoint parameters makes removal easier, though it obstructs joint learning across sources. We propose NULLs (Natively Unlearnable LLMs), a model class that satisfies the two opposing goals of isolating source-specific contributions and learning jointly across sources, by training a set of shared backbone neurons alongside a pool of sparsely activated sinks. During training, information specific to a source naturally concentrates in its sinks while information shared across sources accumulates in the backbone. A source is then unlearned at deployment by disabling its corresponding sinks, with no gradient updates and no access to the retained data. We show that NULLs scales to Wikipedia's ~6M articles, isolating each as an independent source. Unlearning a single article removes knowledge specific to it while preserving facts shared with semantically related articles, closely matching retraining from scratch. We note that unlearning with NULLs is also robust: in a case study of unlearning the Harry Potter books, NULLs resists both adversarial extraction and relearning that reverses post-hoc unlearning. Finally, NULLs preserves general language capabilities, matching a standard transformer on downstream benchmarks. Together, these results suggest that source-level unlearning need not be an afterthought. It can be built natively into LLM training while retaining the benefits of shared representation learning.
Large language models are increasingly deployed across professional domains, bringing hard-to-predict risks, including the generation of harmful or disrespectful content. Although substantial progress has been made in developing safety evaluation datasets, existing resources remain overwhelmingly English- and Chinese-centric. This limitation is particularly pronounced when evaluating languages that operate within shared sociocultural, legal, and ethical contexts. To address this gap, we introduce Sch\"{u}tzen: a German–Bulgarian safety dataset designed to assess model answerability under risk, covering both a low-resource language (Bulgarian) and a high-resource language (German). Experiments with multilingual and language-specific LLMs reveal pronounced cross-language differences in safety behavior, highlighting the necessity of tailored, region-specific evaluation resources to support the responsible deployment of LLMs in Germany and Bulgaria. Datasets and code are available at https://github.com/xnlp-lab/Schutzen. Warning: this paper contains examples that may be offensive, harmful, or biased.