Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

03.
arXiv (CS.LG) 2026-06-17

Robust Local Polynomial Regression with Similarity Kernels

arXiv:2501.10729v3 Announce Type: replace-cross Abstract: Local Polynomial Regression (LPR) is a widely used nonparametric method for modeling complex relationships due to its flexibility and simplicity. It estimates a regression function by fitting low-degree polynomials to localized subsets of the data, weighted by proximity. However, traditional LPR is sensitive to outliers and high-leverage points, which can significantly affect estimation accuracy. This paper revisits the kernel function used to compute regression weights and proposes a novel framework that incorporates both predictor and response variables in the weighting mechanism. The focus of this work is a conditional density kernel that robustly estimates weights by mitigating the influence of outliers through localized density estimation. The proposed method is implemented in Python and is publicly available at https://github.com/yaniv-shulman/rsklpr. The population analysis quantifies the bias induced by density-based robust weighting, and the reported experiments show lower empirical bias than iterative robust LOWESS while remaining competitive with standard LOWESS. This advancement provides a promising extension to traditional LPR, opening new possibilities for robust regression applications.

04.
arXiv (CS.CV) 2026-06-17

Where Should Action Generation Begin? A Learnable Source Prior for Generative Robot Policies

Generative robot policies typically begin action generation from an observation-independent standard Gaussian distribution, leaving the choice of source distribution underexplored. This work asks a simple question: where should action generation begin? We propose LeaP, a Learnable source Prior that replaces the standard Gaussian with a proprioception-conditioned diagonal Gaussian over action chunks. Parameterized by a lightweight MLP, LeaP jointly predicts the mean and state-adaptive variance of the source distribution, while keeping the downstream generator architecture and inference solver unchanged. This design provides an observation-informed yet stochastic initialization, allowing the generator to focus on precise action refinement rather than transporting samples from an uninformed noise source. On 15 RoboTwin manipulation tasks, LeaP achieves an average success rate of 81.6%, outperforming four representative baselines – including deterministic-source methods, a no-prior counterpart, and a diffusion-bridge policy – by 6.5 to 25.5 percentage points. The same prior consistently improves both flow-matching and diffusion-bridge generators, while using fewer parameters and converging faster. The advantage carries over to real-world deployment, where LeaP attains the best performance. These results suggest that the source distribution is an independent and reusable design axis for generative robot policies, complementary to the choice of generative dynamics.

05.
arXiv (CS.CV) 2026-06-16

Parameter-Efficient Adaptation of SAM 3 for Automated ITV Generation from 4DCT Images

Four-dimensional computed tomography (4DCT) captures the full respiratory cycle of thoracic anatomy, yet current Internal Target Volume contouring workflows process each phase in isolation, discarding temporal coherence and leaving contours vulnerable to phase-specific artifacts. We present a lightweight framework that applies parameter-efficient fine-tuning to the Segment Anything Model 3 (SAM 3) via low-rank adaptation (LoRA) to align its text-prompted segmentation with the medical domain using only seven annotated 3D CT volumes. Furthermore, the framework incorporates a hard negative mining strategy to improve boundary discrimination in low-contrast thoracic regions. At inference, phase-wise predictions are refined through phase-coherent temporal filtering and spatial connectivity analysis. Since respiratory motion is continuous and periodic, genuine anatomy appears in contiguous blocks of phases, whereas transient artifacts appear sporadically and are thus effectively suppressed. Experiments on pulmonary and cardiac structures yield median Dice scores of 0.968 and 0.910 with 95th-percentile Hausdorff distances of 0.998 mm and 2.931 mm, respectively. The proposed framework effectively eliminates the severe false-positive predictions inherent in the zero-shot inference of the unadapted SAM 3. With only seven annotated volumes, the framework retains over 95% of full-data accuracy, and the entire pipeline is trainable on a single consumer-grade GPU, demonstrating a scalable, data-efficient solution for adaptive radiotherapy.

06.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

07.
arXiv (CS.AI) 2026-06-12

Real-Time Execution with Autoregressive Policies

arXiv:2606.13355v1 Announce Type: cross Abstract: Real-time execution, enabled by asynchronous inference that ensures both smooth action trajectories and fast reactivity, is critical for realistic deployments of large-scale Vision-Language-Action models. However, recent work on real-time execution primarily focuses on variants of diffusion policies, even though it is more critical for autoregressive policies given their slower rollout speed in synchronous inference. In contrast, we demonstrate that autoregressive policies can achieve real-time execution by adjusting the tokenization horizon and applying constrained decoding, thereby guaranteeing strict latency bounds that enable multi-trajectory decoding to maximize performance. Across simulated and real-world environments, we find that the autoregressive policy consistently outperforms its equivalent-level flow-matching policy counterpart while achieving significantly improved task completion speeds from synchronous inference. Coupled with the inherent advantages of autoregressive policies, such as faster convergence and better generalizability in instruction-following, these results confirm that autoregressive policies can remain a competitive policy type supporting real-time execution.

08.
arXiv (CS.LG) 2026-06-11

Triangular-Reference Schrödinger Bridges for Time Series Generation

arXiv:2605.27478v3 Announce Type: replace-cross Abstract: Schrödinger bridges for time series (SBTS) generate synthetic paths by projecting, in relative entropy, a Brownian reference onto the path laws that match the joint distribution of the data on the observation grid. The Brownian reference, however, fixes the quadratic variation of the generated paths, which is restrictive when stochastic volatility, correlated noise, or rank-deficient covariance structures must be reproduced. We introduce "Triangular-Reference Schrödinger Bridges for Time Series" (TR-SBTS), which keeps the entropy-projection backbone of SBTS but replaces the Brownian reference by a triangular, volatility-informed, intervalwise frozen reference on a state augmented with latent covariance descriptors. The construction remains a single entropy projection on the augmented state: the minimiser is the \(h\)-transform of the reference, and on each frozen interval the optimal drift has the logarithmic-gradient form \(b^\star(t,x)=A\,\nabla\log H(t,x)\), intrinsic to the active covariance directions when the frozen covariance \(A\) is degenerate. We prove stability of the frozen approximation and consistency of the associated regularised kernel estimators, describe a reference-aware Nadaraya–Watson implementation of the conditional next-increment law, and evaluate the construction on numerical experiments.

09.
arXiv (CS.CV) 2026-06-15

Aligned but Stereotypical? How System Prompts Shape Demographic Bias in LLM-Based Text-to-Image Models

Text-to-image (T2I) systems increasingly rely on Large Language Model (LLM)-based text conditioning to interpret and expand user prompts. While this improves prompt understanding and text-image alignment, we find that it can also introduce implicit demographic assumptions, even when demographic attributes are unspecified. To systematically investigate this behavior across varying levels of prompt ambiguity and complexity, we construct a comprehensive benchmark covering diverse prompt settings. Evaluations on eight recent T2I models show that LLM-based systems consistently exhibit stronger demographic skew than non-LLM-based baselines. We further analyze system prompts, a component unique to LLM-based T2I systems that guides prompt interpretation and expansion. Our analyses show that these instructions strongly influence text embeddings, which subsequently leads to biased image generations. Motivated by these findings, we propose FairPro, a training-free debiasing framework that adaptively generates fairness-aware instructions while preserving user intent. Experiments demonstrate that FairPro substantially reduces demographic disparities while maintaining prompt fidelity.

10.
arXiv (CS.AI) 2026-06-16

Edit Knowledge, Not Just Facts via Multi-Step Reasoning over Background Stories

arXiv:2602.02028v2 Announce Type: replace Abstract: Enabling artificial intelligence systems, particularly large language models, to update knowledge and flexibly apply it during reasoning remains a central challenge. Existing knowledge editing approaches emphasize atomic facts, improving factual recall but often failing to integrate updated information into a coherent framework usable across contexts. In this work, we argue that knowledge update is fundamentally a reasoning problem rather than a memorization problem. Consequently, a model should be trained in situations where the new information is instrumental to solving a task, combined with pre-existing knowledge, and exercised through multi-step reasoning. Based on this insight, we propose a training strategy based on three principles. First, new knowledge is introduced as a coherent background story that contextualizes novel facts and explains their relation to existing knowledge. Second, models are trained using self-generated multi-hop questions that require multi-step reasoning involving the new information. Third, training is done using knowledge distillation, forcing a student model to internalize the teacher's reasoning behavior without access to the novel information. Experiments show that models trained with this strategy effectively leverage newly acquired knowledge during reasoning and achieve remarkable performance on challenging questions that require combining multiple new facts.

11.
arXiv (CS.LG) 2026-06-16

Communication-Efficient Distributed Training for Collaborative Flat Optima Recovery in Deep Learning

arXiv:2507.20424v3 Announce Type: replace Abstract: We study centralized distributed data parallel training of deep neural networks (DNNs), aiming to improve the trade-off between communication efficiency and model performance of the local gradient methods. To this end, we revisit the flat-minima hypothesis, which suggests that models with better generalization tend to lie in flatter regions of the loss landscape. We introduce a simple, yet effective, sharpness measure, Inverse Mean Valley, and demonstrate its strong correlation with the generalization gap of DNNs. We incorporate an efficient relaxation of this measure into the distributed training objective as a lightweight regularizer that encourages workers to collaboratively seek wide minima. The regularizer exerts a pushing force that counteracts the consensus step pulling the workers together, giving rise to the Distributed Pull-Push Force (DPPF) algorithm. Empirically, we show that DPPF outperforms other communication-efficient approaches and achieves better generalization performance than local gradient methods and synchronous gradient averaging, while maintaining communication efficiency. In addition, our loss landscape visualizations confirm the ability of DPPF to locate flatter minima. On the theoretical side, we show that DPPF guides workers to span flat valleys, with the final valley width governed by the interplay between push and pull strengths, and that its pull-push dynamics is self-stabilizing. We further provide generalization guarantees linked to the valley width and prove convergence in the non-convex setting.

12.
arXiv (CS.AI) 2026-06-12

Once-for-All: Scalable Simultaneous Forecasting via Equilibrium State Estimation

arXiv:2606.13285v1 Announce Type: cross Abstract: We introduce Equilibrium State Estimation (ESE), a novel paradigm for simultaneous prediction, where multiple interacting systems require separate yet coordinated forecasts. Such scenarios often arise in real-world settings such as economics and healthcare modeling. Unlike existing approaches that predict one system at a time, ESE forecasts all systems in a single pass. It first estimates the equilibrium state across systems, then generates holistic forecasts based on the difference between the current state and the estimated equilibrium. Extensive experiments on synthetic and real-world datasets, including currency exchange and COVID-19 spread modeling, demonstrate that ESE is at least as accurate as state-of-the-art (SOTA) methods while being significantly faster. In addition, ESE integrates seamlessly with conventional predictors, combining their accuracy with its exceptional efficiency and delivering a 10-70x speedup. With linear-time complexity, ESE scales far better than SOTA methods as the number of systems increases. Moreover, it remains accurate under diverse perturbations, establishing ESE as a fast, generalizable, robust, and scalable multi-prediction method.

13.
arXiv (CS.AI) 2026-06-19

Towards Engineering Scaling Laws with Pretraining Data Composition

arXiv:2606.19781v1 Announce Type: cross Abstract: Neural scaling laws describe how model performance improves as a power law in compute, model size, and dataset size. While well-established for large language models, these relationships are emerging for large models in particle physics. As with language, empirical studies show that the performance scales as a power law. However, unlike natural language or image domains, fundamental physics has high-fidelity simulators that produce synthetic data cheaply. This favors scaling regimes where additional data is cheaper than additional parameters, and allows the pretraining dataset itself to be engineered to influence the scaling. For the task of classifying hadronic jets produced in collisions of high-energy particle beams, we show that the scaling behavior can be engineered towards requiring more data rather than larger models by inclusion of pretraining data which is more diverse and better aligned with the downstream classification task.

14.
arXiv (CS.LG) 2026-06-15

CANN-EUCLID: unsupervised constitutive artificial neural network model discovery from full-field data

arXiv:2606.14565v1 Announce Type: cross Abstract: Constitutive artificial neural networks (CANNs) provide interpretable material model discovery, but have so far been used in stress-supervised settings based on apparent stress-strain data from homogeneous tests. Because each test samples only a narrow loading path and provides homogenized rather than local stress information, robust discovery typically requires multiple loading modes to constrain the multidimensional response. This is challenging for soft biological tissues, where repeated testing, damage, and sample variability limit reliable information from a single specimen. Here, we combine CANNs with the stress-unsupervised full-field discovery framework EUCLID to identify sparse hyperelastic laws directly from displacement fields and reaction forces in one heterogeneity-inducing loading case. CANN-EUCLID minimizes equilibrium imbalance with sparsity-promoting regularization selecting compact active terms, without local stress measurements or a prescribed law. We evaluate the approach on isotropic and anisotropic benchmarks with prescribed ground-truth laws. When the ground truth is representable by the chosen CANN basis, our method recovers the correct terms with near-exact accuracy, including exponential terms with embedded parameters. When it is not contained in the basis, the method retains shared terms and approximates missing contributions using available basis functions. Generalization depends strongly on sampled deformation states: exponential strain-stiffening terms can be recovered accurately when sufficiently probed, but can produce large extrapolation errors when the stiffening regime lies outside the sampled domain. Forward FE validation simulations show that the discovered behavior accurately replicates the ground truth. These results establish stress-unsupervised CANN discovery as a promising framework for interpretable full-field constitutive model identification.

15.
arXiv (CS.AI) 2026-06-15

Federated Causal Inference from Multi-Site Observational Data via Propensity Score Aggregation

arXiv:2505.17961v4 Announce Type: replace-cross Abstract: Causal inference typically assumes centralized access to individual-level data. Yet, in practice, data are often decentralized across multiple sites, making centralization infeasible due to privacy, logistical, or legal constraints. We address this problem by estimating the Average Treatment Effect (ATE) from decentralized observational data via a Federated Learning (FL) approach, allowing inference through the exchange of aggregate statistics rather than individual-level data. We propose a novel method to estimate propensity scores via a federated weighted average of local scores using Membership Weights (MW), defined as probabilities of site membership conditional on covariates. MW can be flexibly estimated with parametric or non-parametric classification models using standard FL algorithms. The resulting propensity scores are used to construct Federated Inverse Propensity Weighting (Fed-IPW) and Augmented IPW (Fed-AIPW) estimators. In contrast to meta-analysis methods, which fail when any site violates positivity, our approach exploits heterogeneity in treatment assignment across sites to improve overlap. We show that Fed-IPW and Fed-AIPW perform well under site-level heterogeneity in sample sizes, treatment mechanisms, and covariate distributions. Theoretical analysis and experiments on simulated and real-world data demonstrate clear advantages over meta-analysis and related approaches.

16.
arXiv (CS.LG) 2026-06-19

A graph neural network surrogate model for mesh-based crashworthiness prediction of vehicle panel components

arXiv:2503.17386v2 Announce Type: replace-cross Abstract: Crashworthiness is a key performance measure in the design of safety-critical vehicle panel components such as B-pillars. Finite element (FE) simulations are widely used to evaluate crash responses but remain computationally expensive for large-scale, nonlinear impact scenarios, particularly when integrated into iterative design and optimisation processes. Although machine learning-based surrogate models have been developed for rapid crashworthiness analysis, they exhibit limitations in detailed representation of complex 3-dimensional components. Graph Neural Networks (GNNs) have emerged as a promising solution for processing data with complex structures. However, existing GNN models often lack sufficient accuracy and computational efficiency to meet industrial demands. This paper proposes Recurrent Graph U-Net (ReGUNet), a graph-based surrogate model for crashworthiness analysis of vehicle panel components. By representing FE meshes in graph form, the model naturally accommodates complex irregular structural geometries. Its hierarchical architecture improves computational efficiency and accuracy, while the introduction of recurrence enhances stability of temporal predictions over multiple time steps. A side-impact case study of hot-stamped steel B-pillars with varying geometries is used to generate training dataset. The trained model demonstrates high accuracy in predicting the dynamic deformation behaviour and crashworthiness indicators of previously unseen component designs. ReGUNet achieves over a 52% reduction in the average deformation prediction error relative to baseline methods, together with markedly improved computational efficiency. ReGUNet provides rapid and reliable crashworthiness assessments, which in turn accelerates the design cycle of vehicle panel components.

17.
arXiv (CS.LG) 2026-06-11

Reinforcement Learning with Action-Triggered Observations

arXiv:2510.02149v2 Announce Type: replace Abstract: We introduce Action-Triggered Sporadically Traceable Markov Decision Processes (ATST-MDPs), a reinforcement learning framework for partial observability in which full state observations occur stochastically at each step, with probability determined by the chosen action. We derive Bellman equations tailored to this setting and establish the existence of an optimal policy. Exploiting the fact that sporadic observations reveal the full state, we provide an equivalent formulation in which agents commit to action-sequences between consecutive observations. Under the linear MDP assumption, we show that the value function over such action-sequences admits a linear representation in a finite-dimensional feature map, enabling standard regression-based methods. As an application, we derive ATST-LSVI-UCB, an optimistic algorithm achieving regret $\widetilde{O}(\sqrt{Kd^3(1-\gamma)^{-3}})$ for episodic learning with geometrically distributed horizons, where $K$ is the number of episodes, $d$ the feature dimension, and $\gamma$ the discount factor (episode continuation probability), matching the known rate for linear MDPs with full observability.

18.
arXiv (CS.AI) 2026-06-19

KG-SoftMAP: Soft Knowledge-Graph Priors for Bayesian Network Structure Learning from Sparse Discrete Data

arXiv:2606.10358v2 Announce Type: replace-cross Abstract: Learning Bayesian network (BN) structure from sparse discrete data is hard: when each instance records only a few variables, most variable pairs lack the joint observations needed for reliable scoring, and data-only methods recover little structure. However, imperfect domain knowledge, expressible as a weighted directed knowledge graph (KG), is often available. We propose KG-SoftMAP, which encodes such a KG as a finite-strength, confidence-weighted edge prior and maximizes a MAP objective combining the BDeu score with a logit-form prior; the KG may be expert-curated or LLM-extracted. On synthetic benchmarks with known DAGs, KG-SoftMAP reaches Directed-F1 (DF1) $0.19$–$0.32$ at observation rate $\rho=0.05$ and DF1 $0.44$–$0.97$ at $\rho\geq0.2$, while every data-only learner tested stays near zero under the same sparse masks. Recovery tracks KG quality: controlled corruption degrades it smoothly, a zero-signal KG yields DF1 $0.00$, and a blindly LLM-extracted KG with imperfect precision and recall still drives substantial recovery. On three real sparse educational datasets, the learned BN acts as a concept-level posterior model: on SAF it matches logistic regression (LR) within $0.03$ F1_FAIL while providing an inspectable concept graph, calibrated Fail probabilities, and tractable posterior queries from partial observations.

19.
PLOS Computational Biology 2026-06-18

Ten simple rules for turning your qualifying exam into an NIH-style fellowship proposal: A guide for graduate students

by Courtney Peña-Lima, Cameron S. Bader, Brendan K. Ball, Troy C. Dildine, Mekhala V. Dissanayake, Iris van ‘t Erve, Albina Ibrayeva, Amy Nippert, M.K. Quinn, Chelse Spinner, Samuel Thompson, Antonio Tomasso, Crystal M. Botham Qualifying exams, often referred to as “quals” or candidacy exams, are an important milestone in doctoral programs. Although the style of quals varies greatly by program and institution, it is usually a proposal that requires students to develop research ideas as well as their scientific writing skills. Many quals are modeled after funding mechanisms that graduate students can apply to and on a topic that the student will pursue in their dissertation. This paper offers graduate students a step-by-step guide on how to turn their quals into a fellowship-style research proposal, using National Institutes of Health (NIH) mechanisms as a benchmark, as this is the norm within US research institutions. This paper will be most useful for students who have completed or are in the process of completing proposal-based qualifying exams, usually in the second year of a doctoral program.

20.
arXiv (CS.CV) 2026-06-17

Revisiting LLM Adaptation for 3D CT Report Generation: A Study of Scaling and Diagnostic Priors

Recent advances in multimodal learning, including large language models (LLMs) and vision-language models (VLMs), have demonstrated strong adaptability to natural images. However, extending their use to the medical domain, particularly for volumetric (3D) images, is challenging due to high computational complexity, volumetric dependencies and the semantic gap between visual features and clinical terminology. Naively fine-tuning LLMs on limited medical data often leads to overfitting and clinical hallucination, where linguistic fluency is prioritized over clinical factuality. In this study, we investigate parameter-efficient adaptation strategies for volumetric CT report generation and introduce RAD3D-Prefix, a lightweight diagnostic-prior conditioning framework that minimizes the need for extensive parameter training. This module integrates image embeddings with multi-label diagnostic classification logits, preserving critical clinical details while bridging the semantic gap. By keeping the LLM frozen, our method requires minimal trainable parameters and mitigates the risk of overfitting on small, domain-specific datasets. Through a systematic study spanning LLMs from 96.1M to 1.6B parameters, we find that fine-tuning is most beneficial for smaller LLMs, whereas freezing larger (~1B+ LLMs and training only lightweight projection layers provides a superior trade-off between performance, generalization, and computational efficiency. Across multiple automatic metrics and a clinical reader study, RAD3D-Prefix outperforms comparable parameter-efficient baselines and demonstrates strong out-of-domain generalization while using substantially fewer trainable parameters than fully fine-tuned alternatives.

21.
arXiv (CS.CV) 2026-06-18

Motion-Focused Latent Action Enables Cross-Embodiment VLA Training from Human EgoVideos

Training generalist Vision-Language-Action(VLA) models typically requires massive, diverse robotic datasets with high-fidelity action annotations. While egocentric human manipulation videos are abundant and capture significant environmental diversity, the absence of action labels makes them difficult to use in conventional training paradigms. To address this, we propose a latent-action-based framework designed to extract general action priors from unlabeled human videos. The architecture features a Hybrid Disentangled VQ-VAE that decouples motion dynamics from environmental backgrounds through physical masks, enabling the construction of a cross-embodiment action codebook. By pre-training on human videos with the codebook, the VLM backbone learns deep representations of action intent. For adaptation to specific embodiments, we introduce an intent-perception decoupling strategy where the VLM predicts the action intent while a separate frozen visual encoder provides state-specific features to the action expert, thereby reducing action hallucinations. Results in simulation and real-world environments show that our method, pre-trained exclusively on unlabeled human videos, performs competitively with state-of-the-art VLA models trained on massive annotated datasets, requiring only 50 trajectories for downstream adaptation.

22.
arXiv (CS.LG) 2026-06-11

Why Depth Matters in Parallelizable Sequence Models: A Lie Algebraic View

arXiv:2603.05573v2 Announce Type: replace Abstract: Scalable sequence models, such as Transformer variants and structured state-space models, often trade expressivity power for sequence-level parallelism, which enables efficient training. Here we examine the bounds on error and how error scales when models operate outside of their expressivity regimes using a Lie-algebraic control perspective. Our theory formulates a correspondence between the depth of a sequence model and the tower of Lie algebra extensions. Echoing recent theoretical studies, we characterize the Lie-algebraic class of constant-depth sequence models and their corresponding expressivity bounds. Furthermore, we analytically derive an approximation error bound and show that error diminishes exponentially as the depth increases, consistent with the strong empirical performance of these models. We validate our theoretical predictions using experiments on symbolic word and continuous-valued state-tracking problems.

23.
arXiv (CS.CL) 2026-06-16

LLM-Powered Virtual Population for Demand Simulation and Pricing

We develop an LLM-powered virtual population model that simulates demand for pricing decisions, in settings where products are described by rich unstructured information, such as text descriptions and images, and where decision makers need not only mean-demand predictions but also uncertainty estimates for counterfactual prices. Our model represents exposed customers as draws from a finite mixture of customer personas. For each persona, product, and candidate price, an LLM elicits a persona-level purchase probability using both structured persona information and unstructured product information. These probabilities are aggregated through calibrated mixture weights to form a predictive distribution of aggregate demand. The resulting simulator can evaluate counterfactual prices under various pricing objectives, including expected revenue and risk-aware criteria such as conditional value at risk. We test the framework on an online H&M fashion dataset with product descriptions and images. The calibrated LLM-based simulator achieves the best overall predictive performance among the models considered, and supports sample-efficient pricing decisions. Our framework provides a practical way to use LLMs as demand simulators for products with limited historical demand data but rich product information. By producing a full predictive demand distribution rather than only a point forecast, it enables managers to compare candidate prices, quantify demand uncertainty, and choose prices that target either average-case revenue or risk-aware objectives.

24.
arXiv (CS.AI) 2026-06-19

CADBench: A Multimodal Benchmark for AI-Assisted CAD Program Generation

arXiv:2605.10873v2 Announce Type: replace-cross Abstract: Recovering editable CAD programs from images or 3D observations is central to AI-assisted design, but progress is difficult to measure because existing evaluations are fragmented across datasets, modalities, and metrics. We introduce CADBench, a unified benchmark for multimodal CAD program generation. CADBench contains 18,000 evaluation samples spanning six benchmark families derived from DeepCAD, Fusion 360, ABC, MCB, and Objaverse; five input modalities including clean meshes, noisy meshes, single-view renders, photorealistic renders, and multi-view renders; and six metrics covering geometric fidelity, executability, and program compactness. STEP-based families are stratified by B-rep face count and all families are diversity-sampled to support controlled analysis across complexity and object variation. We benchmark eleven CAD-specialized and general-purpose vision-language systems, generating more than 1.4 million CAD programs. Under idealized inputs, specialized mesh-to-CAD models substantially outperform code-generating VLMs, which remain far from reliable CAD program reconstruction. CADBench further reveals three recurring failure modes: reconstruction quality degrades with geometric complexity, CAD-specialized models can be brittle under modality shift, and model rankings change across metrics. Together, these results position CADBench as a diagnostic testbed for measuring progress in editable 3D reconstruction and multimodal CAD understanding. The benchmark is publicly available at https://github.com/anniedoris/CADBench.

25.
arXiv (CS.AI) 2026-06-19

Execution-bound advisory automation for agentic AI: a reproducible AIBOM-driven CSAF-VEX framework

arXiv:2606.19390v1 Announce Type: cross Abstract: A protocol driven framework is presented that binds SBOM and AIBOM artefacts to deterministic environment capture and structured runtime telemetry. Exploitability is computed from declared artefacts, observed activation conditions, and enforced execution policies. CSAF VEX advisories are generated from combined static and runtime evidence, cryptographically signed, and validated through deterministic replay. Evaluation uses approximately 10000 component entries across synthetic Agentic AI workloads 50 to 5000 components, incorporating OSV, GitHub Advisory, KEV, and EPSS datasets.