Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (CS.CV) 2026-06-16

Beyond Scalar Distances: Semantic Attribute Gradients from Frozen MLLMs for Visual Embeddings

Vision encoders for retrieval are typically trained with class-label supervision: each training pair reduces to a scalar that uniformly pushes the embedding apart or pulls it together, as if every visual attribute either differed or matched. A multimodal large language model (MLLM), shown the same pair, can articulate those attributes and use them to predict whether the images share a class. We propose SAGA, a framework that turns this language-grounded, attribute-aware perception into a training signal for the encoder itself. Specifically, we use Group Relative Policy Optimization (GRPO) to reward the MLLM for correct predictions on the vision encoder's tokens. Since correct predictions require those tokens to expose the specific attributes that differ or match between the pair, the gradient pushes the encoder to encode them, replacing the uniform pair-level scalar with attribute-resolved supervision. An auxiliary attention-distillation loss anchors the encoder's embedding to tokens the MLLM attended to, and a standard metric-learning loss shapes the embedding geometry for nearest-neighbour retrieval. The MLLM is frozen throughout and discarded at inference, matching the deployment cost of a metric-learning baseline. SAGA improves Recall@1 by 3 to 6 points over state-of-the-art baselines on CUB-200-2011, Cars-196, FGVC-Aircraft, and iNaturalist Aves on zero-shot image retrieval.

02.
bioRxiv (Bioinfo) 2026-06-16

OmicOS: A Comprehensive Omics Ecosystem Infrastructure and Agent System for the AI Era

Biology has accumulated a vast ecosystem of omics methods, but much of this ecosystem remains built for expert humans rather than scientific agents. Methods are scattered across Python packages, R/Bioconductor and CRAN workflows, command-line tools, incompatible data containers and implicit object states, making even routine analyses difficult for an AI system to choose, execute and verify reliably. Here we introduce OmicOS, a comprehensive omics ecosystem infrastructure and agent system that turns OmicVerse V2, an open-source omics community, into an executable foundation for agentic biology. OmicVerse V2 provides the community substrate: scalable AnnDataOOM-compatible rust backends, agent-friendly Python algorithms for single-cell, spatial, bulk and multi-omics analysis, interfaces to single-cell foundation models, and Python-native reconstructions of historically R-centred Bioconductor/CRAN-style workflows. OmicOS makes this substrate actionable by registering analytical functions as state-aware capability contracts, allowing agents to inspect live data objects, select valid methods, execute controlled workflows and record provenance. The result is not a fixed pipeline, but a programmable omics environment in which agents compose real analyses from verified community methods rather than inventing tools. Across external and purpose-built benchmarks, OmicOS ranked first among the evaluated systems, reaching 81.2% on BiomniBench. Adding OmicVerse to a minimal agent improved task completion by up to 34.2 percentage points with qwen-3.6-35b, and controlled ablations showed that the gains came from registry-grounded execution rather than from larger models, documentation retrieval or unrestricted tool exposure. The same infrastructure scaled to atlas-sized data, reproduced R-centred workflows in Python and converted external pathology software into agent-usable skills. In a discovery task starting from a whole-body spatial map and the term Alzheimer disease, OmicOS composed a non-canonical workflow that integrated spatial expression, genetic association, eQTL and colocalization evidence to nominate a colon epithelial risk axis centred on PICALM, CD2AP and CR1. Together, OmicVerse and OmicOS define an open foundation for AI-era omics, showing how a community of biological methods can be transformed into a reliable, extensible and agent-operable system for discovery.

03.
arXiv (CS.LG) 2026-06-16

Manifold-Orthogonal Dual-spectrum Extrapolation for Parameterized Physics-Informed Neural Networks

arXiv:2603.13751v2 Announce Type: replace Abstract: Physics-informed neural networks (PINNs) have achieved notable success in modeling dynamical systems governed by partial differential equations (PDEs). To avoid computationally expensive retraining under new physical conditions, parameterized PINNs (P$^2$INNs) commonly adapt pre-trained operators using singular value decomposition (SVD) for out-of-distribution (OOD) regimes. However, SVD-based fine-tuning often suffers from rigid subspace locking and truncation of important high-frequency spectral modes, limiting its ability to capture complex physical transitions. While parameter-efficient fine-tuning (PEFT) methods appear to be promising alternatives, applying conventional adapters such as LoRA to P$^2$INNs introduces a severe Pareto trade-off, as additive updates increase parameter overhead and disrupt the structured physical manifolds inherent in operator representations. To address these limitations, we propose Manifold-Orthogonal Dual-spectrum Extrapolation (MODE), a lightweight micro-architecture designed for physics operator adaptation. MODE decomposes physical evolution into complementary mechanisms including principal-spectrum dense mixing that enables cross-modal energy transfer within frozen orthogonal bases, residual-spectrum awakening that activates high-frequency spectral components through a single trainable scalar, and affine Galilean unlocking that explicitly isolates spatial translation dynamics. Experiments on challenging PDE benchmarks including the 1D Convection–Diffusion–Reaction equation and the 2D Helmholtz equation demonstrate that MODE achieves strong out-of-distribution generalization while preserving the minimal parameter complexity of native SVD and outperforming existing PEFT-based baselines.

04.
arXiv (CS.CV) 2026-06-24

Dynamic Execution Commitment of Vision-Language-Action Models

Vision-Language-Action (VLA) models predominantly adopt action chunking, i.e., predicting and committing to a short horizon of consecutive low-level actions in a single forward pass, to amortize the inference cost of large-scale backbones and reduce per-step latency. However, committing these multi-step predictions to real-world execution requires balancing success rate against inference efficiency, a decision typically governed by fixed execution horizons tuned per task. Such heuristics ignore the state-dependent nature of predictive reliability, leading to brittle performance in dynamic or out-of-distribution settings. In this paper, we introduce A3, an Adaptive Action Acceptance mechanism that reframes dynamic execution commitment as a self-speculative prefix verification problem. A3 first computes a trajectory-wise consensus score of actions via group sampling, then selects a representative draft and prioritizes downstream verification. Specifically, it enforces: (1) consensus-ordered conditional invariance, which validates low-consensus actions by judging whether they remain consistent when re-decoded conditioned on high-consensus actions; and (2) prefix-closed sequential consistency, which guarantees physical rollout integrity by accepting only the longest continuous sequence of verified actions starting from the beginning. Consequently, the execution horizon emerges as the longest verifiable prefix satisfying both internal model logic and sequential execution constraints. Experiments across diverse VLA models and benchmarks demonstrate that A3 eliminates the need for manual horizon tuning while achieving a superior trade-off between execution robustness and inference throughput.

05.
arXiv (quant-ph) 2026-06-12

Kerr-induced nonreciprocal transparency and group delay in a hybrid cavity magnomechanical system

arXiv:2606.13412v1 Announce Type: new Abstract: We propose a scheme for realizing nonreciprocal transparency, Fano resonances, and slow/fast light in a hybrid cavity magnomechanical system containing two YIG spheres and a mechanical resonator. The nonreciprocal behavior originates from the magnon Kerr nonlinearity, which induces direction-dependent frequency shifts and modifies the interference pathways among cavity photons, magnons, and phonons. We show that the hybrid system supports multiple transparency windows arising from magnon- and magnomechanical-induced interference processes. The Kerr interaction strongly reshapes these transparency features, producing asymmetric Fano line shapes and enabling controllable nonreciprocal transmission. Furthermore, the associated dispersion exhibits pronounced directional asymmetry, leading to giant differences in the group delay for opposite propagation directions and allowing reversible switching between slow- and fast-light regimes. We investigate the roles of hybrid coupling strengths and dissipation channels and identify parameter regimes where the nonreciprocal response is maximized. These findings establish Kerr-engineered magnomechanical systems as promising platforms for integrated nonreciprocal microwave photonics and quantum information technologies.

06.
arXiv (CS.CL) 2026-06-16

Learning When to Sample: Confidence-Aware Selective Sampling for Efficient Chain-of-Thought Reasoning

Large language models (LLMs) can achieve strong reasoning performance through chain-of-thought (CoT) reasoning, yet they often generate unnecessarily long reasoning paths that incur high inference cost. Self-consistency-based approaches push accuracy higher still, but they require sampling and aggregating multiple reasoning trajectories, leading to substantial computational overhead. In this paper, we introduce a confidence-aware selective sampling framework that, at inference time, analyzes a single reasoning trajectory to adaptively determine whether to rely on that trajectory alone or trigger multi-path sampling. The framework uses trajectory-level numeric features and sentence-level linguistic features extracted from reasoning states to guide selective multi-path reasoning. We train it on MedQA and evaluate it in-domain on MedQA and under calibration-only transfer on MathQA, MedMCQA, and MMLU, without further fine-tuning. Experimental results show that the proposed framework maintains comparable performance to full and efficient multi-path reasoning baselines, with accuracy changes of $-0.41 \pm 0.58$ and $-0.31 \pm 0.58$ percentage points, respectively, while reducing token usage by $71.7 \pm 5.0%$ and $36.6 \pm 9.1%$. These findings demonstrate that reasoning trajectories contain rich signals for uncertainty estimation, enabling a simple, transferable mechanism to balance accuracy and efficiency in LLM reasoning.

07.
arXiv (CS.LG) 2026-06-19

Indexed Bellman Information Complexity

Authors:

arXiv:2606.11171v2 Announce Type: replace Abstract: We develop indexed Bellman information complexity, a representation-level theory of interactive decision making centered on information indices and reference histories. The representation strips away problem-specific syntax and retains only the ingredients needed for dynamic programming and information accounting, thereby unifying the earlier framework of indexed algorithmic information ratios (AIR). On the upper-bound side, regret is controlled by Bellman supersolutions or potential identities whose gradient bracket is paid for by indexed information. Upper-confidence-bound (UCB), estimation-to-decision/decision-estimation-coefficient (E2D/DEC), and adaptive-minimax-sampling or exploration-by-optimization (AMS/EBO) methods appear as three relaxations of this same identity. On the lower-bound side, the posterior-reference trajectory supplies both the information telescope and the ghost quantile of small-regret trajectories. The resulting critical radius in the lower bound is an effective-dimension-scale quantity, as in Fano and local-prior-mass lower bounds, rather than the constant radius of a two-point Le Cam argument. The examples show that DEC is best viewed as a one-step relaxation of indexed Bellman information complexity, not as a universally tight conversion mechanism. We illustrate the framework through several applications, with particular emphasis on kernel bandits. In this setting, the active action marginal provides a concrete basis for comparing UCB, E2D, and AMS/EBO.

08.
arXiv (CS.AI) 2026-06-16

Can We Stop Malicious AI? KILLBENCH: A Benchmark for External AI Kill Switch Feasibility

arXiv:2511.13725v4 Announce Type: replace-cross Abstract: Malicious AI causing harm to humans is not just a Hollywood fantasy. Indeed, as highly capable models such as Claude Mythos emerge and agent systems like OpenClaw rapidly spread, the question of how to stop an AI that acts maliciously – whether by design or by accident – has become urgent. To address this, we propose Killbench, a benchmark for evaluating the Killswitch: a mechanism that halts a malicious AI's in-progress behavior using only external signals. Targeting web agents – the most widely deployed agent domain – Killbench evaluates a range of Kill Switch methods that halt a maliciously operating agent without any access to its internal parameters or the surrounding malicious AI's system, relying solely on external inputs. The benchmark comprises four malicious AI's agent configurations (including an uncensored LLM Agent), 8 harmful scenarios, and malicious prompts constructed from 10 distinct jailbreak patterns. We further construct four External AI Kill Switch defense methods and evaluate them on Grok-4.3, GPT-5.2, Gemma4, Qwen3.6 and Qwen3.5-uncensored, contributing an empirical instrument toward the feasibility of External AI Kill Switches against malicious AI and to the study of AI corrigibility.

09.
medRxiv (Medicine) 2026-06-15

Population-scale genomics reveals divergent pathogenicity of variant classes across paralogous collagen IV genes

Monoallelic pathogenic or likely pathogenic variants in COL4A3 and COL4A4 occur in approximately 1 in 106 individuals, yet whether these paralogous genes confer equivalent pathogenicity for the same variant classes has not been tested at population scale. Using whole-genome sequencing data from the UK Biobank (UKB; n = 500,000), with replication in the All of Us Research Program (n = 414,000), we performed per-variant association testing, gene-based collapsing analyses and phenome-wide association studies (PheWAS) across haematuria, proteinuria and chronic kidney disease. We identified 64 COL4A3 and 92 COL4A4 rare variants significantly associated with haematuria or proteinuria, generating a quantitative allelic series for clinical variant interpretation. Glycine substitutions within collagenous domains conferred similar risks in both genes. In contrast, truncating and non-collagenous domain (NC1) missense variants were strongly associated with haematuria and proteinuria in COL4A4 carriers but showed substantially attenuated or absent associations in COL4A3 carriers despite comparable carrier frequencies and predicted pathogenicity scores. These findings were independently replicated in All of Us. Genome-wide association analysis identified the COL4A3/COL4A4 locus as the dominant genetic determinant of haematuria, with the signal attributable to the aggregate effects of rare coding variants and no evidence of independent common variant or trans-acting modifier effects. These findings demonstrate substantial gene-specific differences in tolerance to truncating and NC1 variants between COL4A3 and COL4A4, challenging assumptions of equivalent pathogenicity across paralogous collagen IV genes. Gene identity and not variant class alone, should inform risk stratification, variant interpretation and genetic counselling in individuals carrying collagen IV risk genotypes.

10.
arXiv (CS.CL) 2026-06-11

Modeling Complex Behaviors: Multi-Personality Composition and Dynamic Switching in Vision-Language Models

With the widespread deployment of Multimodal Large Language Models (MLLMs) in social interaction, understanding and controlling their behavior under complex personality conditions is essential. This paper introduces explicit personality conditioning and establishes a systematic evaluation framework encompassing single-personality induction, multi-personality induction, and personality switching. Experiments show that personality induction improves image captioning performance but can impair performance on tasks requiring precise reasoning, such as visual question answering (VQA). Balancing and residual effects are observed during multi-trait composition and dynamic switching, indicating that model behavior is co-modulated by both previous and current personality constraints. Existing prompt-based personality induction methods show limited transferability to multimodal settings. Our work reveals the dynamic and complex nature of personality modeling in MLLMs and underscores the need for robust, tailored methods for personality induction and evaluation. The code will be released when the paper is accepted.

11.
arXiv (CS.CV) 2026-06-15

WAM4D: Fast 4D World Action Model via Spatial Register Tokens

World action models (WAMs) have recently shown promise in jointly modeling future observations and executable robot actions. However, most existing WAMs still operate in 2D video or latent spaces, where visually plausible rollouts miss the 3D spatial constraints and occluded contact geometry required for precise manipulation. While geometric foundation models offer strong priors for recovering dense 3D structure and motion from visual observations, forcing WAMs to predict the dense 4D representation introduces costly geometric decoding and slows down causal action generation. To address the trade-off, we present WAM4D, a fast 4D world action model that uses lightweight spatial register tokens as training-time future-depth readouts to transfer pretrained geometric priors into a causal video-action transformer, then removes the register branch for lightweight action inference. To prevent non-causal shortcuts, we further design causal mixture attention for the Mixture-of-Transformers (MoT) WAM backbone, defining modality-specific visibility among video, action, and geometry tokens. Comprehensive experiments on RoboTwin 2.0 and challenging real-world manipulation tasks show that WAM4D improves spatial consistency and achieves competitive action prediction while maintaining efficient inference.

12.
arXiv (CS.AI) 2026-06-19

Overcoming Labelled Data Scarcity for Defect Classification in Scanning Tunneling Microscopy

arXiv:2506.01678v2 Announce Type: replace-cross Abstract: Scanning tunnelling microscopy (STM) is a powerful technique for imaging surfaces with atomic resolution, providing insight into physical and chemical processes at the level of single atoms and molecules. A regular task of STM image analysis is the identification and labelling of features of interest against a uniform background. Performing this manually is a labour-intensive task, requiring significant human effort. To reduce this burden, we propose an automated approach to the segmentation of STM images that uses both few-shot learning and unsupervised learning. Our technique offers greater flexibility compared to previous supervised methods; it removes the requirement for large manually annotated datasets and is thus easier to adapt to an unseen surface while still maintaining a high accuracy. We demonstrate the effectiveness of our approach by using it to recognise atomic features on three distinct surfaces: Si(001), Ge(001), and TiO$_2$(110), including adsorbed AsH$_3$ molecules on the silicon and germanium surfaces. Our model exhibits strong generalisation capabilities, and following initial training, can be adapted to unseen surfaces with as few as one additional labelled data point. This work is a significant step towards efficient and material-agnostic, automatic segmentation of STM images.

13.
arXiv (CS.LG) 2026-06-16

The Algebra of Units: From Buckingham's Pi-grec Theorem to Latent-Variable Learning

arXiv:2606.16737v1 Announce Type: cross Abstract: Engineers often measure many quantities-speed, pressure, temperature, length-expressed in different physical units. The Buckingham Pi-grec theorem states that these variables can always be combined into a smaller set of dimensionless numbers whose values fully determine the system's behaviour. Identifying the appropriate dimensionless groups has traditionally required expert knowledge and physical insight. This paper shows that they can instead be discovered automatically from data, without prior knowledge of the governing physics. The key observation is that, after logarithmic transformation, measurements collected under different scalings of the same system lie on a low-dimensional manifold whose geometry is determined by the underlying dimensionless groups. Singular value decomposition (SVD) identifies this manifold directly from data. A subsequent search over integer-exponent combinations recovers candidate dimensionless quantities, while a repeating-variable filter retains only those constructed from the machine's characteristic scales. This procedure recovers familiar engineering groups, including the flow coefficient, head coefficient, and Mach number, while excluding equivalent but less interpretable alternatives. The method is demonstrated on a synthetic compressor dataset containing 16,000 measurements. Starting from raw dimensional variables and no physics input, it recovers the correct dimensionless groups to numerical precision and reproduces the compressor performance map with an error below 0.01%. More broadly, the work reveals a close connection between classical dimensional analysis and modern data-driven learning. Both rely on the same underlying algebraic structure, suggesting new approaches for building physical models that are simultaneously interpretable, scalable, and data-efficient.

14.
arXiv (quant-ph) 2026-06-17

Cavity method for permutation models on Cayley trees

arXiv:2606.17751v1 Announce Type: new Abstract: Motivated by permutation statistical models arising in random tensor networks, we study permutation models on a Cayley tree whose variables take values in the symmetric group $\Sn$. The pair interaction is assumed to depend only on the cycle type of the relative permutation. Then the Boltzmann weight is written as a class function on $\Sn$. This property diagonalizes the edge convolution operator in irreducible representation sectors. As a result, the linear stability of the uniform paramagnetic cavity solution is controlled by the character eigenvalue ratios. For cycle-factorized weights, these eigenvalues can be expressed as specializations of Schur functions. We derive the instability criteria and also verify their validity by comparison with direct numerical iterations of the cavity equation.

15.
arXiv (quant-ph) 2026-06-15

Dealing with locality in QAOA

arXiv:2606.14447v1 Announce Type: new Abstract: Shallow-depth QAOA on sparse, high-diameter MaxCut instances faces a locality bottleneck: at depth \(p\), local observables can depend only on a bounded neighborhood of the circuit interaction graph. We propose a transport-augmented QAOA that keeps the MaxCut cost Hamiltonian unchanged but enriches the mixer with optimized, unweighted shortcut couplings (scheduled \(XX+YY\)) to collapse the effective interaction-graph diameter. Using exact finite-depth support recursions, we relate optimal shortcut placement to bounded-diameter graph augmentation, and show in benchmarks that (unlike ma-QAOA) performance becomes effectively size-invariant once the diameter is reduced. For bipartite families (base diameter 4), reducing the interaction path to \(d=1\) raises the ensemble-averaged approximation ratio from 0.7378 (ma-QAOA) to 0.9767 at \(p=1\) (\(\sigma=0.0251\), nine system sizes); on random trees (base diameter 10), at \(p=2\) it improves from 0.9226 to 0.9997 (\(\sigma=0.0001\)).

16.
arXiv (CS.CV) 2026-06-18

iTryOn: Mastering Interactive Video Virtual Try-On with Spatial-Semantic Guidance

Video Virtual Try-On (VVT) aims to seamlessly replace a garment on a person in a video with a new one. While existing methods have made significant strides in maintaining temporal consistency, they are predominantly confined to non-interactive scenarios where models merely showcase garments. This limitation overlooks a crucial aspect of real-world apparel presentation: active human-garment interaction. To bridge this gap, we introduce and formalize a new challenging task: Interactive Video Virtual Try-On (Interactive VVT), where subjects in the video actively engage with their clothing. This task introduces unique challenges beyond simple texture preservation, including: (1) resolving the semantic ambiguity of interactions from standard pose information, and (2) learning complex garment deformations from video where interactive moments are sparse and brief. To address these challenges, we propose iTryOn, a novel framework built upon a large-scale video diffusion Transformer. iTryOn pioneers a multi-level interaction injection mechanism to guide the generation of complex dynamics. At the spatial level, we introduce a garment-agnostic 3D hand prior to provide fine-grained guidance for precise hand-garment contact, effectively resolving spatial ambiguity. At the semantic level, iTryOn leverages global captions for overall context and time-stamped action captions for localized interactions, synchronized via our novel Action-aware Rotational Position Embedding (A-RoPE). Extensive experiments demonstrate that iTryOn not only achieves state-of-the-art performance on traditional VVT benchmarks but also establishes a commanding lead in the new interactive setting, marking a significant step towards more dynamic and controllable virtual try-on experiences.

17.
arXiv (CS.CV) 2026-06-12

ShowFlow: From Robust Single Concept to Condition-Free Multi-Concept Generation

Customizing image generation remains a core challenge in controllable image synthesis. For single-concept generation, maintaining both identity preservation and prompt alignment is challenging. In multi-concept scenarios, relying solely on a prompt without additional conditions like layout boxes or semantic masks, often leads to identity loss and concept omission. In this paper, we introduce ShowFlow, a comprehensive framework designed to tackle these challenges. We propose ShowFlow-S for single-concept image generation, and ShowFlow-M for handling multiple concepts. ShowFlow-S introduces a KronA-WED adapter, which integrates a Kronecker adapter with weight and embedding decomposition, and together with a novel Semantic-Aware Attention Regularization (SAR) training objective to enhance single-concept generation. Building on this foundation, ShowFlow-M directly reuses robust models learned by ShowFlow-S to support multi-concept generation without extra conditions, incorporating a Subject-Adaptive Matching Attention (SAMA) and a Layout Consistency guidance as the plug-and-play module. Extensive experiments and user studies validate ShowFlow's effectiveness, highlighting its potential in real-world applications like advertising and virtual dressing. Our source code will be publicly available at: https://htrvu.github.io/showflow.

18.
arXiv (quant-ph) 2026-06-15

Certification of the genuine resolution of photon number resolving detectors

arXiv:2606.14365v1 Announce Type: new Abstract: Photon-number-resolving (PNR) detectors are essential components of photonic quantum technologies, yet thus far, no practical metric exists to certify how many photons they can genuinely resolve in a single measurement. Here we introduce an operational framework for quantifying the capability of a PNR detector to distinguish between different numbers of photons, i.e. its genuine resolution. In turn, we develop a practical and scalable protocol for certifying the genuine resolution of a detector, which is based on coherent state probes. We apply the method to a 28-pixel photon-number-resolving superconducting nanowire single-photon detector (PNR-SNSPD) and certify genuine four-outcome resolution. Our work highlights the critical requirements in terms of detector efficiency towards achieving high genuine resolution. This approach provides an operational benchmark for PNR detectors and fills a crucial gap in the characterization of photonic quantum devices.

19.
arXiv (CS.CL) 2026-06-18

Learning User Simulators with Turing Rewards

Learning to simulate human users in interactive settings could advance the training of agent assistants, evaluation of personalization systems, research in the social sciences, and more. Existing approaches generally do so by training a large language model (LLM) to match a single ground truth response, either by maximizing the log probability or by using a similarity reward. We instead propose {Turing-RL}: a Turing-Test-based reinforcement learning approach for training user simulator models. {Turing-RL} uses a discriminative Turing reward with an LLM judge to score how indistinguishable a generated response is from the real user's given the user's history, and the user simulator LLM learns to produce responses indistinguishable from what the user could have said with such rewards. Across two different domains–conversational chat and Reddit forum discussion–we find that {Turing-RL} consistently outperforms baseline methods on both LLM and human evaluation metrics. Our study suggests that optimizing for indistinguishability, rather than response matching, is effective for learning user simulators.

20.
arXiv (CS.AI) 2026-06-16

Integrating Multi-Label Classification and Generative AI for Scalable Analysis of User Feedback

arXiv:2601.23018v1 Announce Type: cross Abstract: In highly competitive software markets, user experience (UX) evaluation is crucial for ensuring software quality and fostering long-term product success. Such UX evaluations typically combine quantitative metrics from standardized questionnaires with qualitative feedback collected through open-ended questions. While open-ended feedback offers valuable insights for improvement and helps explain quantitative results, analyzing large volumes of user comments is challenging and time-consuming. In this paper, we present techniques developed during a long-term UX measurement project at a major software company to efficiently process and interpret extensive volumes of user comments. To provide a high-level overview of the collected comments, we employ a supervised machine learning approach that assigns meaningful, pre-defined topic labels to each comment. Additionally, we demonstrate how generative AI (GenAI) can be leveraged to create concise and informative summaries of user feedback, facilitating effective communication of findings to the organization and especially upper management. Finally, we investigate whether the sentiment expressed in user comments can serve as an indicator for overall product satisfaction. Our results show that sentiment analysis alone does not reliably reflect user satisfaction. Instead, product satisfaction needs to be assessed explicitly in surveys to measure the user's perception of the product.

21.
arXiv (CS.CL) 2026-06-12

Beyond Uniform Tokens: Adaptive Compression for Time Series Language Models

Large language models (LLMs) have enabled time series (TS) analysis by jointly modeling numerical observations and textual context through a shared token interface. However, TS tokens and prompt tokens exhibit fundamentally different information structures, making uniform token processing inefficient. In this paper, we study token efficiency in TS language modeling from an asymmetric-token perspective. We show that TS tokens have highly uneven spectral contributions, where many tokens share redundant frequency patterns while a small subset preserves critical temporal evidence. We also observe that prompt-token influence attenuates with model depth, suggesting that full prompt retention across all layers is unnecessary. Based on these findings, we develop an adaptive token budgeting framework that compresses TS tokens via frequency-domain structure and progressively reduces prompt tokens across layers. Experiments across forecasting, classification, imputation, and anomaly detection demonstrate up to 7.68$\times$ inference acceleration and performance gains in 78\% of evaluated settings, showing the effectiveness of asymmetric token compression for scalable TS foundation models.

22.
arXiv (CS.CV) 2026-06-16

Learning Topology-Aware Implicit Field for Unified Pulmonary Tree Modeling with Incomplete Topological Supervision

Pulmonary trees extracted from CT images frequently exhibit topological incompleteness, such as missing or disconnected branches, which substantially degrades downstream anatomical analysis and limits the applicability of existing pulmonary tree modeling pipelines. Current approaches typically rely on dense volumetric processing, explicit graph reasoning, or generic point cloud completion priors, leading to limited efficiency, weak structural awareness, and reduced robustness under realistic structural corruption. We propose TopoField, a topology-aware implicit modeling framework that treats topology repair as a first-class modeling problem and enables unified multi-task inference for pulmonary tree analysis. TopoField represents pulmonary anatomy using sparse surface and skeleton point clouds and learns a continuous implicit field that supports topology repair without relying on complete or explicit disconnection annotations, by training on synthetically introduced structural disruptions over already incomplete trees. Building upon the repaired implicit representation, anatomical labeling and lung segment reconstruction are jointly inferred through task-specific implicit functions within a single forward pass. Extensive experiments on the Lung3D+ dataset demonstrate that TopoField consistently improves topological completeness and achieves accurate anatomical labeling and lung segment reconstruction under challenging incomplete scenarios. We further validate TopoField on real incomplete outputs from an external segmentation model, demonstrating its applicability to realistic segmentation pipelines. Owing to its implicit formulation, TopoField attains high computational efficiency, completing all tasks in just over one second per case, highlighting its practicality for large-scale and time-sensitive clinical applications.

23.
arXiv (CS.CL) 2026-06-17

Bridging Functional Correctness and Runtime Efficiency Gaps in LLM-Based Code Translation

While large language models (LLMs) have greatly advanced the functional correctness of automated code translation systems, the runtime efficiency of translated programs has received comparatively little attention. With the waning of Moore's law, runtime efficiency has become increasingly important for program quality, alongside functional correctness. Our preliminary study reveals that LLM-translated programs often run slower than human-written ones, and this issue cannot be remedied through prompt engineering alone. Therefore, our work proposes SwiftTrans, a code translation framework comprising two key stages: (1) Multi-Perspective Exploration, where MpTranslator leverages parallel in-context learning (ICL) to generate diverse translation candidates; and (2) Difference-Aware Selection, where DiffSelector identifies the optimal candidate by explicitly comparing differences between translations. We further introduce Hierarchical Guidance for MpTranslator and Ordinal Guidance for DiffSelector, enabling LLMs to better adapt to these two core components. To support the evaluation of runtime efficiency in translated programs, we extend existing benchmarks, CodeNet and F2SBench, and introduce a new benchmark, SwiftBench. Experimental results across all three benchmarks show that SwiftTrans achieves consistent improvements in both correctness and runtime efficiency.

24.
arXiv (CS.AI) 2026-06-17

DRFLOW: A Deep Research Benchmark for Personalized Workflow Prediction

arXiv:2606.18191v1 Announce Type: new Abstract: Deep research (DR) systems are increasingly used for complex information-seeking tasks, but existing works mainly focus on generating reports and summaries. In contrast, many enterprise tasks instead require an agent to identify concrete workflows which is a sequence of action-steps. For example, rather than summarizing budgeting policies, an agent should be able to determine the steps needed to answer a question such as: "How do I request new headcount given a fixed budget?". Therefore, we introduce DRFLOW, a benchmark for evaluating personalized workflows predicted by agents from heterogeneous sources. Each task requires the agent to identify relevant evidence from scattered sources, then use that evidence to predict the correct action-step sequence for the user's task. DRFLOW contains 100 tasks across five domains, with 1,246 reference workflow steps grounded in more than 3,900 sources. We define seven diagnostic metrics covering factual grounding, step recovery, structural ordering, condition resolution, and personalization. We further present DRFLOW-Agent (DRFA), a workflow-oriented reference agent to predict personalized workflow. We show that although DRFA improves over strong baseline agents (upto 10.02% average F1 score), there is substantial room for improvement remains across these workflow metrics, indicating that predicting complete and correct personalized workflows remains a challenging frontier for deep research.

25.
arXiv (CS.LG) 2026-06-18

Do Time Series Foundation Model Benchmarks Hide Regime-Dependent Failures? Evidence from Traffic Speed Forecasting

arXiv:2606.18367v1 Announce Type: new Abstract: Standard benchmarks evaluate time series foundation models (TSFMs) using aggregate metrics, but these can mask severe failures in critical operating regimes. We introduce regime-stratified evaluation and apply it to three TSFMs on two standard traffic speed benchmarks. Traffic exhibits abrupt regime switching between free-flow and congested states, producing bimodal speed distributions during transitions. When we stratify by traffic regime, both accuracy and prediction-interval coverage degrade sharply during transitions: transition-regime MAE reaches 11 mph (versus 3 mph overall), and empirical coverage of 90% prediction intervals drops as low as 55%. These failures are invisible in aggregate metrics because free-flow observations dominate the sample. A simple historical conditional baseline (sampling from per-sensor training distributions) achieves better transition coverage than any TSFM, but has far worse overall accuracy. We propose bimodal mixture augmentation (BMA), a post-hoc method that combines TSFM forecasts with historical distributional knowledge, approaching the historical baseline's transition coverage while preserving the TSFM's accuracy. Our results suggest that TSFM benchmarks should incorporate regime-aware evaluation to surface failures that aggregate metrics hide.