Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CV) 2026-06-16

Where Does Texture Evidence Live in SAM? Features, Proposal Masks, and Texture Segmentation

Texture segmentation stresses foundation segmentation because meaningful regions are defined by material or repeated appearance rather than object identity. Segment Anything Models (SAMs) often fail by default on such texture-defined partitions, but this failure is ambiguous: the texture evidence may be absent, missing from the proposal bank, or present but selected or assembled incorrectly by an object-centric readout. We ask what texture-relevant evidence is already preserved in frozen SAM before adaptation. We study two frozen evidence spaces: multiscale features, probed with a minimal clustering readout, and the automatic proposal bank, treated as evidence for a supervised consolidation readout. SAM is frozen throughout; we do not fine-tune the backbone or retrain the proposal generator. Across RWTD, STLD, an ADE20K-selected refined-crop complement, and a ControlNet-stitched PTD bridge archive, frozen SAM is not a texture segmenter by default, but its failures are not simple texture blindness. Coarse frozen features preserve texture organization, and proposal banks often contain texture-aligned masks or fragments. Natural scenes more often require assembly and commitment over fragments, while cleaner synthetic cases more often reduce to selecting an already coherent proposal. Default mask failure should therefore be decomposed into representation evidence, proposal-bank support, readout mismatch, and commitment failure.

02.
arXiv (CS.AI) 2026-06-19

CRAX: Fast Safe Reinforcement Learning Benchmarking

arXiv:2606.20376v1 Announce Type: cross Abstract: Safety is a core concern for deploying reinforcement learning (RL) agents in real-world domains such as robotics and autonomous driving. While benchmarks have been central to progress in RL, existing safety benchmarks with high-fidelity 3D physics remain computationally slow, limiting large-scale experimentation and rapid prototyping. To address this gap, we propose CRAX (Constrained RL Accelerated with JAX). Built on top of the MuJoCo XLA (MJX) physics engine with realistic 3D dynamics, CRAX leverages vectorized operations and hardware acceleration, yielding up to ~100x speedups over comparable CPU-based safety benchmarks. The benchmark features six environment suites and three agent-specific tasks, each spanning three difficulty levels. Evaluating six popular safe RL methods shows that no single approach dominates across all tasks, and reveals the trade-offs between performance and safety. We find that curriculum learning across difficulty levels and safety transfer can improve performance over direct training in harder settings.

03.
arXiv (CS.AI) 2026-06-19

Library-Aware Doubles and Iterative Repair for Large Language Model-Generated Unit Tests in OpenSIL Firmware

arXiv:2606.19725v1 Announce Type: cross Abstract: Validating changes in low-level C firmware is expensive because unit tests (UTs) are fragile under strict build constraints, where missing headers, unresolved symbols, and dependency mismatches frequently prevent compilation and linking. This study introduces an automated UT authoring workflow for the Open-Source Silicon Initialization Library (openSIL) firmware codebase maintained by Advanced Micro Devices (AMD) that reduces manual effort through a large language model (LLM) guided multi-agent pipeline. The workflow combines automated generation of test scaffolds, library-aware creation or reuse of stubs, mocks, and fakes, and an iterative compile-dispatch repair loop driven by build logs and line-coverage feedback. We evaluate the approach using compilation success, repair iterations, dispatch success, and line coverage, with time, cost, and token usage as secondary measures. Across 76 functions under test, the workflow generated compilable UTs for 73 functions. In a configuration without line coverage guidance or retrieval augmentation, mean line coverage reached 73.9%. On a 48-function subset evaluated under both configurations, mean line coverage reached 98.8% with line-coverage guidance alone and reached 94.7% when combined with vector-database retrieval. Results show that automated generation-and-repair pipelines can substantially improve UT creation efficiency and coverage for constrained firmware environments while reducing manual debugging effort.

04.
arXiv (CS.LG) 2026-06-16

Rethinking Structural Anomaly Detection: From Decision Boundaries to Projection Operators

arXiv:2606.15280v1 Announce Type: new Abstract: Most existing anomaly detection methods rely on estimating a probability density or learning an enclosing decision boundary, implicitly assuming that normal data occupies a region of non-zero volume in the ambient space. In contrast, structural anomaly detection considers data that lies near a low-dimensional manifold, creating a mismatch between the inductive bias of existing methods and the structure of the data, often resulting in degraded performance. To address this mismatch, we introduce a geometric perspective. Specifically, we learn a projection operator onto the manifold of normal samples and define a sample as anomalous if it is altered by this projection. This formulation naturally integrates the inductive bias of manifold-supported data and reframes anomaly detection in terms of a projection residual, thereby resolving issues arising from modeling degenerate distributions. Notably, it provides a unifying interpretation of reconstruction-based methods by explaining their success and failure in terms of projection quality. In particular, it explains the strong generalization ability of projection-aligned models as a consequence of contraction behavior toward the manifold. Moreover, by decoupling anomaly detection from probabilistic modeling, it reduces the tendency to misclassify rare but normal samples, a widely recognized limitation of existing approaches. Empirically, we demonstrate that projection-aligned methods achieve strong performance, outperforming boundary-based methods while improving upon existing reconstruction-based approaches.

05.
arXiv (CS.AI) 2026-06-17

Graph neural networks at war: integrating cybersecurity and drone intelligence in the Israeli-Iranian conflict

arXiv:2606.17119v1 Announce Type: cross Abstract: Physical cyber systems have brought about new threats and challenges in detection and immediate response. This study examines how Graph Neural Networks (GNNs) can be used to aid cybersecurity and drone management in a physical cyber system comprising of cyber intrusions and unmanned aerial vehicles (UAVs). By providing a bridge between structural understanding of graphical neural networks, this work has provided an integrated procedure that allows intrusion detection systems to educate on underlying network structures, identify malicious activity, and facilitates drone response measures. Based on an emulation-based case study, cyberattacks models were created to provoke the responses of the drones, which proved that graph-based learning can assist with the situational awareness, swarm coordination, and adaptive maneuver. According to the performance valuation, this method has a detection rate of 94.2, average area under the receiver operating characteristic (ROC) of 0.955 and an average response time of 1.4 seconds. Comparative experiments reveal that proposed GraphSAGE network is more effective than the Graphical Convolutional Networks (GCNs) and Graphical Attention Networks (GATs) in the identical situation. Such findings prove that graphical neural networks can be used to avert intrusion and response of dynamic cyber-physical systems.

06.
arXiv (CS.CV) 2026-06-17

Revisiting LLM Adaptation for 3D CT Report Generation: A Study of Scaling and Diagnostic Priors

Recent advances in multimodal learning, including large language models (LLMs) and vision-language models (VLMs), have demonstrated strong adaptability to natural images. However, extending their use to the medical domain, particularly for volumetric (3D) images, is challenging due to high computational complexity, volumetric dependencies and the semantic gap between visual features and clinical terminology. Naively fine-tuning LLMs on limited medical data often leads to overfitting and clinical hallucination, where linguistic fluency is prioritized over clinical factuality. In this study, we investigate parameter-efficient adaptation strategies for volumetric CT report generation and introduce RAD3D-Prefix, a lightweight diagnostic-prior conditioning framework that minimizes the need for extensive parameter training. This module integrates image embeddings with multi-label diagnostic classification logits, preserving critical clinical details while bridging the semantic gap. By keeping the LLM frozen, our method requires minimal trainable parameters and mitigates the risk of overfitting on small, domain-specific datasets. Through a systematic study spanning LLMs from 96.1M to 1.6B parameters, we find that fine-tuning is most beneficial for smaller LLMs, whereas freezing larger (~1B+ LLMs and training only lightweight projection layers provides a superior trade-off between performance, generalization, and computational efficiency. Across multiple automatic metrics and a clinical reader study, RAD3D-Prefix outperforms comparable parameter-efficient baselines and demonstrates strong out-of-domain generalization while using substantially fewer trainable parameters than fully fine-tuned alternatives.

07.
arXiv (quant-ph) 2026-06-17

Helical Dirac Current with Local Coupling to a Chiral Potential

arXiv:2606.17618v1 Announce Type: new Abstract: We show that exact Dirac eigenstates in cylindrical confinement carry a definite helical conserved-current texture even in the zero orbital angular momentum channel l = 0. For the lowest confined mode, the Dirac current contains a nonvanishing azimuthal component together with longitudinal transport and exhibits opposite handedness in the two spin-resolved sectors. The structure also persists into the evanescent region. We further derive the channel-resolved matrix-element kernel generated by a static chiral scalar potential acting on the confined l = 0 Dirac modes. The resulting spin-selective coupling arises from the Dirac current texture and the scalar chiral potential, and yields a geometric selection rule in which diagonal channels vanish while off-diagonal conversion channels survive. The coupling strength is governed by an internal sampled-current overlap Jchi(k), defined as the integral from 0 to R of f(rho) times jphi_up(rho, k) times rho d rho. This quantity measures the spatial overlap between the chiral radial profile and the spin-up azimuthal Dirac-current density. The mechanism is fully local and texture-based, without external magnetic fields or spin-orbit coupling. Within standard Dirac theory, this work identifies the minimal static Dirac-geometric kernel underlying spin-selective response, establishing a baseline structure from which dynamical-medium, scattering, and transport formalisms can be systematically developed toward a complete description of spin-polarization phenomena such as CISS.

08.
arXiv (CS.LG) 2026-06-19

Exploring the potential of AlphaEarth and TESSERA embeddings for Fine-scale Local Climate Zone Mapping: A case study across five cities in Switzerland

arXiv:2606.20034v1 Announce Type: new Abstract: Understanding urban spatial morphology is critical for climate modeling, risk assessment, and sustainable urban design, and Local Climate Zone (LCZ) mapping provides the basic framework for this. However, many cities still use coarse ~100-m resolution LCZ records, which are unsuitable for fine-scale urban research. In this study, precomputed embeddings from TESSERA (Feng et al., 2025) and AlphaEarth (Brown et al., 2025) are compared to traditional Sentinel-1/2 (S1S2) composites in five Swiss cities to see if they can upscale coarse LCZ maps to 10-m resolution using an attention-based U-Net. Three experiments assess multi-city transferability, the impact of higher-resolution reference data, and temporal robustness to year-to-year phenology changes. We find that all datasets achieve strong performance with test data Intersection-over-Union (IoU) ranging from 0.59-0.69 and 0.77-0.82 in the first two experiments. TESSERA consistently outperforms both S1S2 and AlphaEarth across both settings As expected, we find that the transfer of embedding-based models from one year to another remains an open challenge. Overall, however, our results demonstrate the promising potential of embeddings derived from EO foundation models to reduce time consuming preprocessing, respectively, manual feature engineering tasks and to guide a universal deep learning-based LCZ mapping workflow. When combined with a simple location-aware attention U-Net architecture, the embeddings enhance regional transferability and scalability, supporting the development of comprehensive and reproducible fine-scale LCZ maps for global urban climate applications Improving reference data quality remains the strongest lever for further accuracy gains.

09.
arXiv (quant-ph) 2026-06-12

Testing the problem of time with cold atoms

arXiv:2509.07745v3 Announce Type: replace-cross Abstract: We realize a cold-atom system to quantitatively test relational constructions of time. A well-isolated atomic Bose-Einstein condensate evolves in a conservative trap that is partitioned by a thin optical barrier into an observed and unobserved sector, with negligible dissipation on the experimental timescale. Motivated by relational-time approaches discussed in the Wheeler-DeWitt framework, we ask whether the dynamics of the observed sector can be ordered using only internal degrees of freedom. To this end, we construct an entropic time from an experimentally defined coarse-grained entropy, and demonstrate that it can robustly order the events in the observed sector across repeated cycles of expansion and recollapse. We finally derive an effective Schroedinger equation parameterized by this internal time and show that it is able to reproduce the measured evolution. These results establish a controlled experimental setting in which relational-time constructions can be quantitatively tested.

10.
arXiv (CS.LG) 2026-06-19

Humanoid Everyday: A Comprehensive Robotic Dataset for Open-World Humanoid Manipulation

arXiv:2510.08807v2 Announce Type: replace-cross Abstract: From loco-motion to dextrous manipulation, humanoid robots have made remarkable strides in demonstrating complex full-body capabilities. However, the majority of current robot learning datasets and benchmarks mainly focus on stationary robot arms, and the few existing humanoid datasets are either confined to fixed environments or limited in task diversity, often lacking human-humanoid interaction and lower-body locomotion. Moreover, there are a few standardized evaluation platforms for benchmarking learning-based policies on humanoid data. In this work, we present Humanoid Everyday, a large-scale and diverse humanoid manipulation dataset characterized by extensive task variety involving dextrous object manipulation, human-humanoid interaction, locomotion-integrated actions, and more. Leveraging a highly efficient human-supervised teleoperation pipeline, Humanoid Everyday aggregates high-quality multimodal sensory data, including RGB, depth, LiDAR, and tactile inputs, together with natural language annotations, comprising 10.3k trajectories and over 3 million frames of data across 260 tasks across 7 broad categories. In addition, we conduct an analysis of representative policy learning methods on our dataset, providing insights into their strengths and limitations across different task categories. For standardized evaluation, we introduce a cloud-based evaluation platform that allows researchers to seamlessly deploy their policies in our controlled setting and receive performance feedback. By releasing Humanoid Everyday along with our policy learning analysis and a standardized cloud-based evaluation platform, we intend to advance research in general-purpose humanoid manipulation and lay the groundwork for more capable and embodied robotic agents in real-world scenarios. Our dataset, data collection code, and cloud evaluation website are made publicly available on our project website.

11.
arXiv (CS.CV) 2026-06-11

Time-Conditioned and Multi-Time Survival Prediction from 2D PET/CT Projections in Lung Cancer

Accurate prediction of overall survival (OS) from positron emission tomography/computed tomography (PET/CT) can support personalized treatment and follow-up strategies in oncology. However, the impact of temporal modeling on imaging-based survival prediction remains insufficiently explored. We investigate how different temporal formulations influence survival prediction by developing two complementary approaches: Attention-guided Time-Conditioned Survival (ATCS) and Multi-Time Survival (MTS). We retrospectively analyzed pre-treatment PET/CT images from 848 patients with non-small cell lung cancer (NSCLC), including 556 for model development and 292 for held-out testing. A previously proposed Time-Conditioned Survival (TCS) model was used as a baseline. Models were trained using 5-fold cross-validation and evaluated on the test set using time-dependent area under the curve (AUC) at 6-month intervals from 0.5 to 5 years. Both ATCS and MTS outperformed the baseline TCS model, achieving mean AUCs of 0.794 and 0.793, respectively, compared to 0.767. ATCS performed better at earlier time points (0.5-3 years), whereas MTS performed better at later intervals (3.5-5 years). Combining tumor-specific and tissue-wise PET/CT features improved performance over either input alone. Finer temporal discretization improved short-term prediction, while coarser intervals provided more stable long-term estimates. These findings demonstrate that temporal modeling and input design influence PET/CT-based survival prediction. The proposed approaches enable time-specific survival estimation from pre-treatment imaging and may support improved risk stratification and clinical decision-making.

12.
medRxiv (Medicine) 2026-06-22

The direct economic impact of surgical non-response in orthopaedic hip, knee, and spine surgery for osteoarthritis: a cost-utility analysis

Background Annually, nearly 2 million hip, knee, and spinal inpatient surgeries are performed in Canada and the US for osteoarthritis (OA), costing over $37 billion in hospital expenditures. However, 15-30% of patients experience limited or no improvement, resulting in poor value for money. This study evaluated the one-year cost-utility of joint and spine procedures for OA by comparing non-responders to responders, considering various responder definitions. Methods Individual micro-costing data were collected for 1,175 elective hip, knee, and spine patients enrolled in the Longitudinal Evaluation in the Arthritis Program - Osteoarthritis (LEAP-OA) between 2014 and 2018. Quality-adjusted life years (QALYs) were derived using the SF-6D utility index. One-year incremental cost-utility ratios (ICURs) were calculated from the hospital perspective. Results Responder rates varied by definition, ranging from 78%-94% for hip replacements, 64%-90% for knee replacements, 60%-64% for spine fusions, and 50%-68% for spine decompressions. Corresponding ICURs were: $45,956-$51,773/QALY for responders versus $108,593-$485,762/QALY for non-responders for hip replacements; $54,831-$71,151/QALY for responders versus $200,486-$1,203,596/QALY for non-responders for knee replacements; $65,980-$74,422/QALY for responders versus $262,039-$729,686/QALY for non-responders for spine fusions; and $29,947-$42,168/QALY for responders versus $63,195-$662,586/QALY for non-responders for spine decompressions. Conclusions While surgical response rates were highly dependent on the responder definition, ICURs for non-responders were significantly higher than those for responders across all definitions. Beyond the negative impact on patients, there is a compelling economic argument for investment in improved pre-operative identification of patients at risk of surgical non-response. Such efforts could enable more personalized, value-based care pathways and reduce the provision of low-value surgical interventions.

13.
arXiv (CS.CV) 2026-06-12

Zero-Shot Captioning for Cultural Heritage: Automated Image Analysis of Traditional Indonesian Clothing

This paper presents Custom ZeroCLIP, a retrieval-augmented vision-language framework for zero-shot captioning of Indonesian traditional garments. The dataset contains 3,800 expert-annotated images from all 38 Indonesian provinces. Using a province-level inductive zero-shot protocol, the model is trained on 24 seen provinces, validated on 6 seen provinces, and evaluated on 8 unseen provinces. The framework combines a frozen CLIP ViT-B/32 image encoder, a CLIP text encoder, a BERT text encoder, and an LSTM caption decoder. During inference, unseen-province labels and captions are unavailable, and retrieval uses only captions from training provinces. No unseen-province image, label, or caption is used during training, validation, or retrieval-bank construction. Custom ZeroCLIP achieves a CLIPScore of 0.8536, BLEU-4 of 0.3342, and METEOR of 0.4859, outperforming existing baselines. Ablation results show that retrieval improves cultural vocabulary recovery with a 19.3\% METEOR gain, while human evaluation confirms stronger cultural accuracy and fluency. The results demonstrate the effectiveness of retrieval-augmented domain adaptation for culturally grounded caption generation in low-resource heritage settings. The dataset is publicly available at https://github.com/AnugrahAidinYotolembah/Traditional-Indonesian-Clothing-Captioning-Dataset.

14.
medRxiv (Medicine) 2026-06-17

Long-term mortality and cause-specific death after non-cardiac chest pain: a multicentre cohort study of 160,245 patients in China

Abstract Background Non-cardiac chest pain (NCCP) is commonly regarded as a low-risk condition. However, long-term mortality, cause-specific death, and high-risk subgroup characteristics remain poorly defined. Methods In this multicentre registry-linked cohort study, we linked the Chest Pain Center Registry from 101 hospitals in Hunan, China, with the Mortality and Cause of Death Registry. Adults diagnosed with NCCP from Jan 1, 2017, to Dec 31, 2021, were included. We assessed 3-year all-cause, cardiovascular, and non-cardiovascular mortality using Cox, restricted cubic spline, and Fine-Gray models. Findings Among 160,245 patients, 4674 deaths occurred within 3 years (2.9%). Mortality increased sharply after 60.5 years. Age [≥] 60.5 years (adjusted hazard ratio [aHR] 7.49 [95% CI 6.89-8.14]), rural residence (time-varying aHR 1.46 [1.35-1.57] in year 1 and 1.66 [1.46-1.89] in years 1-3), and male sex (aHR 1.47 [1.38-1.57]) independently predicted death. Three-year mortality ranged from 0.3% in younger urban women to 8.4% in older rural men. Cardiovascular diseases accounted for 56.4% of deaths among older patients, whereas other non-cardiovascular causes (22.8%) and malignancy (20.8%) were the largest categories among younger decedents. Interpretation NCCP is not uniformly benign. Age, rural residence, and sex identify patients who could benefit from risk-stratified follow-up, with cardiovascular prevention prioritised for older rural men and broader non-cardiovascular assessment considered for younger patients.

15.
arXiv (CS.AI) 2026-06-19

When, Where, and How: Adaptive Binning for Tabular Self-Supervised Learning

arXiv:2606.19827v1 Announce Type: cross Abstract: Medical tabular data are ubiquitous in clinical research, but deep learning for tables remains underexplored because reliable labels often require costly expert adjudication, even though structured clinical variables are routinely available in tabular form. Self-supervised learning can leverage these unlabeled tables, and recent binning-based pretexts offer a promising inductive bias, but existing objectives fix a single global quantile discretization and apply feature-agnostic supervision. We propose Adaptive Binning, a training-adaptive discretization pretext for tabular SSL that couples discretization to learning through a feature-wise coarse-to-fine curriculum. Motivated by the spectral bias of neural networks and the principles of curriculum learning, our method progressively refines discretization per feature upon plateau detection and selects representation-aware splits to jointly improve value-space concentration and representation-space coherence. A heterogeneity-aware objective unifies categorical reconstruction with ordinal supervision for numerical features, and experiments on public medical tabular datasets under unified evaluation protocols show consistent gains for linear probing and fine-tuning without dataset-specific discretization tuning. We further introduce a medical tabular SSL benchmark with standardized protocols to support reproducible progress in this underexplored domain. Our code is available at https://github.com/labhai/Adaptive-Binning.

16.
arXiv (CS.LG) 2026-06-16

Information Gap and Feasibility-Aware Inference in Binomial Logistic Mixtures

arXiv:2606.15665v1 Announce Type: cross Abstract: This paper studies the information gap between mixture detection and label recovery in binomial logistic mixtures. Standard likelihood-based criteria such as the Bayesian information criterion (BIC) can detect the presence of two components, but this does not guarantee that the corresponding labels are recoverable. We show that this gap is intrinsic to binomial logistic mixtures with a fixed number of trials: observed-data evidence for mixture structure and per-observation information for label recovery have different local orders in the component separation, and only the former accumulates with the sample size. As a result, there exists a detectable-but-unrecoverable regime in which BIC selects two components while the posterior labels remain essentially uninformative. To address this issue, we propose two feasibility-aware inference procedures: a recoverability-aware BIC with a posterior-entropy penalty and an entropy-regularized estimator that mitigates the tendency of the maximum likelihood estimator to produce overly separated components and overly concentrated posterior responsibilities. Numerical experiments confirm the predicted gap and demonstrate that the proposed methods avoid misleading component selections and improve the calibration of posterior label probabilities.

17.
arXiv (CS.AI) 2026-06-19

FlowMaps: Modeling Long-Term Multimodal Object Dynamics with Flow Matching

arXiv:2606.20209v1 Announce Type: cross Abstract: Joint spatial and temporal understanding of 3D scenes is a crucial requirement for robots deployed in everyday household environments. Such agents must not only comprehend and navigate spatial layouts, but also reason about how these spaces evolve over time. In particular, humans interact with objects daily, causing them to change position throughout the environment and making it difficult for robots to reliably associate current observations with previously seen objects. However, these interactions are not random: human habits and routines induce spatio-temporally consistent patterns in object locations, which robotic agents can potentially learn and then exploit for downstream tasks such as navigation. To this end, we introduce FlowMaps, a latent flow matching model for estimating multimodal distributions over the future locations of dynamic objects in a continuous 3D space. By learning the implicit dependencies among objects and their temporal evolution, FlowMaps predicts likely changes in object locations conditioned on past human interactions, while supporting generalization across previously unseen environments that share similar object routines. To demonstrate the utility of this method, we deploy FlowMaps in a downstream dynamic Object Navigation task in both simulated and real-world environments. Across more than 600 episodes, FlowMaps outperforms state-of-the-art approaches, showing that modeling object dynamics through continuous, multimodal spatio-temporal distributions improves robotic search and navigation in changing household environments. Code and additional material is available at https://fra-tsuna.github.io/flowmaps/.

18.
arXiv (quant-ph) 2026-06-19

Optimized Quantum States for Sensing in the Presence of Loss and Phase Noise

arXiv:2606.19649v1 Announce Type: new Abstract: Squeezed vacuum lets gravitational-wave detectors and other quantum sensors surpass the standard quantum limit, and is optimal in the loss-limited regime; phase noise breaks this optimality. Numerically optimizing the quantum Fisher information across the loss and phase-noise landscape, we identify non-Gaussian states that outperform any Gaussian state. These fall into three classes: Fock-like, cubic-phase-like, and states with discrete rotational symmetry. Limiting the average number of photons in the input state to $\bar{n}=5$, with $1-\eta = 5\%$ photon loss and 200 mrad phase noise, the non-Gaussian advantage reaches up to 2.2 dB. Furthermore, we observe that the non-Gaussian advantage can persist even when the measurement strategy is homodyne detection.

19.
bioRxiv (Bioinfo) 2026-06-21

Expanding the GUSome: Structure-guided identification and characterization of gut microbial β-glucuronidases

The gut microbiome-encoded {beta}-glucuronidase (GUS) enzymes have a significant effect on human physiology through their deglucuronidation activity on endogenous and exogenous glucuronides. GUS activity also significantly influences the pharmacokinetics, efficacy and toxicity of various drugs including chemotherapeutic drugs. Given their crucial role in drug metabolism, GUS enzymes have emerged as promising targets for therapeutic intervention. Here, we have identified and characterized 79 unique GUS enzymes through a structure-guided approach. Structural modelling of these GUS enzymes revealed a conserved core and active-site residues with significant variations in the number and nature of the C-terminal domains. A new classification system based on the number and type of additional C-terminal domains is presented for the GUS proteins. Further, GUS enzymes have been categorized into different loop categories linked to their substrate preferences. The relationship between domain architecture and loop-type is explored by sequence similarity network analysis. We could successfully express, purify and validate GUS processing capability of a panel of identified GUS proteins. The nature of oligomer organization has been deciphered by SEC and DLS studies. Further, we have identified additional GUS enzymes capable of processing SN-38G, glucuronidated form of anticancer drug, irinotecan. These newly identified GUS enzymes will offer valuable insights into gut microbial GUS diversity and their role in understanding the population-specific drug-induced adverse effects on human health.

20.
arXiv (CS.AI) 2026-06-15

Application of Artificial Intelligence and Machine Learning in Libraries: A Systematic Review

arXiv:2112.04573v2 Announce Type: replace-cross Abstract: As the concept and implementation of cutting-edge technologies like artificial intelligence and machine learning has become relevant, academics, researchers and information professionals involve research in this area. The objective of this systematic literature review is to provide a synthesis of empirical studies exploring application of artificial intelligence and machine learning in libraries. To achieve the objectives of the study, a systematic literature review was conducted based on the original guidelines proposed by Kitchenham et al. (2009). Data was collected from Web of Science, Scopus, LISA and LISTA databases. Following the rigorous/ established selection process, a total of thirty-two articles were finally selected, reviewed and analyzed to summarize on the application of AI and ML domain and techniques which are most often used in libraries. Findings show that the current state of the AI and ML research that is relevant with the LIS domain mainly focuses on theoretical works. However, some researchers also emphasized on implementation projects or case studies. This study will provide a panoramic view of AI and ML in libraries for researchers, practitioners and educators for furthering the more technology-oriented approaches, and anticipating future innovation pathways.

21.
arXiv (CS.LG) 2026-06-19

Physics-Informed Discovery of Yield Functions in Plasticity via Convex Neural Representations

arXiv:2606.19375v1 Announce Type: new Abstract: Identifying anisotropic yield functions remains challenging since yielding is not directly observed in full-field mechanical measurements, directional calibration can require many loading directions, and selecting an appropriate analytical form is nontrivial. This study proposes a physics-informed framework for discovering yield functions from full-field displacement data and reaction force data, without stress observations, plastic strain measurements, direct yield surface data, or a prescribed parametric yield function. The framework identifies the yield function as a mechanically constrained constitutive component inside elastoplastic stress integration, rather than through direct stress-space supervision. The yield function is represented by a convex neural network that enforces convexity and positive homogeneity of degree one while imposing the assumed tension-compression symmetry, and this neural yield function is trained with a differentiable stress update and a physics-informed force equilibrium loss across multiple loading cases. The proposed framework is validated using finite element (FE) benchmark studies with von Mises, Hill 1948, and Yld2000-2d yield functions, assessing yield contour agreement, displacement-noise sensitivity, identifiability through plastically active stress states, epistemic uncertainty, and polynomial-surrogate deployment. This study provides a mechanics-constrained pathway for discovering anisotropic yield functions from displacement and force data while keeping the identified component within the structure of elastoplastic stress integration.

22.
arXiv (CS.CV) 2026-06-17

NTIRE 2024 Challenge on Image Super-Resolution (x4): Methods and Results

This paper reviews the NTIRE 2024 challenge on image super-resolution ($\times$4), highlighting the solutions proposed and the outcomes obtained. The challenge involves generating corresponding high-resolution (HR) images, magnified by a factor of four, from low-resolution (LR) inputs using prior information. The LR images originate from bicubic downsampling degradation. The aim of the challenge is to obtain designs/solutions with the most advanced SR performance, with no constraints on computational resources (e.g., model size and FLOPs) or training data. The track of this challenge assesses performance with the PSNR metric on the DIV2K testing dataset. The competition attracted 199 registrants, with 20 teams submitting valid entries. This collective endeavour not only pushes the boundaries of performance in single-image SR but also offers a comprehensive overview of current trends in this field.

23.
arXiv (math.PR) 2026-06-17

Convergence Analysis of the Random Bisection Method

arXiv:2603.20483v2 Announce Type: replace-cross Abstract: We propose a generalized version of the bisection method where the cutting point between the two subintervals is chosen at random following an arbitrary distribution. We compute expected convergence rates with respect to any arbitrary a priori distribution for the position of the root in the initial interval and proved that it depends only on the the expectation $\mathbb{E}[c(1-c)]$ of the cut $c$. We also provide a generalization of the method for $K$ random cuts and study its convergence properties. Most probabilistic derivations are kept fairly simple for the ease of understanding of a larger audience. Our theoretical results are then validated numerically using statistical simulation.

24.
arXiv (CS.AI) 2026-06-17

CyberEvolver: Structured Self-Evolution for Cybersecurity Agents On the Fly

arXiv:2605.26195v2 Announce Type: replace-cross Abstract: LLM-based agents are increasingly used for cybersecurity tasks, but most existing systems rely on fixed, human-designed scaffolds that struggle to adapt across diverse targets and failure modes. We introduce \textsc{CyberEvolver}, a self-evolving cybersecurity agent framework that iteratively revises its own scaffold based on experience from failed execution attempts. Self-evolution in cybersecurity is challenging because the space of possible scaffold changes is largely unstructured, execution feedback is sparse and often obscured by the environment, and low-diversity updates can cause errors to compound over repeated iterations. \textsc{CyberEvolver} addresses these challenges with a four-layer evolvable agent architecture that decomposes scaffold optimization into structured components, a trace-to-diagnosis mechanism that converts noisy execution logs into actionable revision signals, and a population-based beam search strategy that preserves diverse agent variants during evolution. We evaluate \textsc{CyberEvolver} on CTF challenges, vulnerability exploitation, and penetration-testing tasks using four open-source LLMs. Across these settings, \textsc{CyberEvolver} improves the seed agent's success rate by $13.6$\,\% on average, and outperforms six human-designed cybersecurity agents as well as two self-improvement methods adapted from other domains. These results suggest that scaffold self-evolution is a promising direction for building adaptive LLM agents for security testing.

25.
arXiv (math.PR) 2026-06-16

Stein's method for the matrix normal distribution

arXiv:2601.11422v2 Announce Type: replace-cross Abstract: This work presents the first systematic development of Stein's method for matrix distributions. We establish the basic essential ingredients of Stein's method for matrix normal approximation: we derive an extended-generator-based Stein identity from a matrix Ornstein-Uhlenbeck diffusion with two-sided scales, provide an explicit semigroup representation for the solution of the Stein equation, and obtain regularity estimates for the solution. The new methodology is demonstrated in three examples: (i) smooth Wasserstein distance bounds to quantify the matrix central limit theorem (a didactic example), (ii) a Wasserstein distance bound for the matrix normal approximation of the centered matrix $T$ distribution, and (iii) a Stein's method-of-moments approach to estimating the row and column covariance factors of the matrix normal, yielding a flexible class of weighted flip-flop Stein estimators that generalize Dutilleul's classical flip-flop algorithm and naturally accommodate row/column importance weights, systematic missingness, and projection onto structured covariance families. The latter two examples are intrinsically matrix-valued and cannot be treated using naive vectorization.