Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

01.
arXiv (quant-ph) 2026-06-16

Readout-Induced Leakage in Superconducting Circuits with Nonlinear Couplings

arXiv:2606.16055v1 Announce Type: new Abstract: In superconducting circuits, drive-induced unwanted transitions limit the readout power, thereby constraining readout speed and fidelity. When such transitions excite the qubit into leakage states, they produce correlated errors that are particularly harmful for quantum error correction. Native nonlinear qubit-readout resonator coupling is a promising alternative to conventional linear hybridization because it provides intrinsic Purcell protection and stricter selection rules for multiphoton processes. In realistic devices, however, we show that such a coupling alone neither eliminates nor necessarily suppresses drive-induced transitions. Instead, if not appropriately engineered, these couplings often worsen the situation by introducing additional parasitic processes. Moreover, the rates of these unwanted transitions remain sensitive to the choice of readout frequency, regardless of the coupling mechanism. We demonstrate that readout-induced leakage can thus vary by orders of magnitude even when readout frequencies differ by less than ~7%. Our results establish that the benefits of native nonlinear couplings are realized only through informed device design, including the spectral placement of relevant auxiliary modes and elimination of parasitic ones.

02.
bioRxiv (Bioinfo) 2026-06-13

ProtAff: Protein Binding Affinity Prediction via LoRA-Finetuned ESM-2

Predicting the binding affinity of protein–protein interactions remains a central challenge in computational biology. Structure prediction models such as AlphaFold3 (AF3) and Boltz-2 can produce high-quality docking poses, and their confidence scores indicate structure quality, but these same scores fail to rank binding affinity among confirmed binders. Here we present ProtAff, a sequence-only affinity prediction model built on ESM-2 (650M parameters) with low-rank adaptation (LoRA) fine-tuning and a cross-attention module. ProtAff is trained using a margin ranking loss on 362,567 affinity measurements spanning 20 heterogeneous data sources, and we removed all training samples whose target sequence exceeds 50% similarity to the test target EGFR. On the AdaptyvBio EGFR benchmark (N = 55), ProtAff achieves a Spearman correlation coefficient {rho} = 0.413, outperforming the best AF3 metric ({rho} = 0.054), the best Boltz-2 metric ({rho} = -0.046), and ML-based predictors MINT ({rho} = 0.242) and CrossAffinity ({rho} = 0.216). Applied to the AdaptyvBio Nipah virus binder design competition, a pipeline incorporating ProtAff for affinity ranking produced a design with KD = 0.132 nM (2 of 5 designs confirmed binding), a 2.8-fold improvement over the competition winner. On a cross-target discrimination benchmark of 91 VHH-antigen crystal structures, ProtAff underperforms structural methods for distinguishing cognate from non-cognate pairings, indicating that sequence-based affinity models are effective for within-target ranking but not for cross-target specificity.

03.
arXiv (CS.AI) 2026-06-17

LLMCodec: Adapting Video Codecs for Efficient Weight Compression of Large Language Models

arXiv:2606.05861v2 Announce Type: replace-cross Abstract: The rapid development of large language models(LLMs) has led to remarkable advances in natural language processing. However, the increasing scale of these models introduces substantial challenges in terms of storage, transmission, and deployment. Though great efforts have been devoted to model compression and quantization, existing methods often rely on fine-tuning or calibration data, which exhibit limited generalization across different tensor types. In this paper, we argue that video codecs offer a promising solution for LLM compression, due to their inherent compatibility with matrix structured data, configurable compression strategies, and the availability of highly optimized, off-the-shelf implementations. Therefore, we present LLMCodec, a video codec-based LLM compression method that integrates affine quantization with the recent VVC/H.266 video codec. Beyond VVC, we further compare a range of video codecs and encoding profiles to evaluate their impact on compression performance. Experiments on different models demonstrate the robustness and generality of LLMCodec. Notably, on LLaMA-3-8B at 2-bit precision, LLMCodec reduces perplexity by over 1.5x and improves downstream task accuracy by 21% compared with the existing method.

04.
arXiv (quant-ph) 2026-06-11

Q-DICE: Quantum Distributed Interconnect Compiler and Emulator

arXiv:2606.11340v1 Announce Type: new Abstract: As distributed quantum computing (DQC) offers a leading path towards scalable quantum computation, the ability to benchmark distributed algorithms under realistic conditions becomes critical for system co-design. However, without access to physical systems, researchers lack tools to evaluate distribution protocols. We introduce Q-DICE (Quantum Distributed Interconnect Compiler and Emulator), a hardware-aware emulation environment for benchmarking distributed quantum circuits on classical simulators and on NISQ-era monolithic hardware. This work provides three core contributions: (1) a programmatic scheme to construct distributed QPU backends, utilizing two novel techniques - QPU slicing and stitching - to facilitate distributed circuit mapping, (2) a methodology for modeling nonlocal link noise using physically motivated Kraus operators and stochastic error channels, and (3) a boundary-aware circuit mapping algorithm enforcing distributed QPU topology constraints during transpilation. Together, these components constitute a distribution-aware compiler and noise-modeling engine that faithfully enforces the physical limitations of distributed quantum hardware within existing execution environments. We validate Q-DICE against a multitude of experimentally demonstrated quantum circuits, including a distributed Grover's search on optically linked trapped-ion hardware, achieving a worst-case fidelity deviation of 4% between simulated and experimental results. These findings demonstrate Q-DICE's capacity to accurately reproduce real distributed quantum system behavior across platforms, streamlining experimentation with distributed quantum algorithms and architectures.

05.
arXiv (CS.AI) 2026-06-18

X+Slides: Benchmarking Audience-Conditioned Slide Generation

arXiv:2606.19256v1 Announce Type: new Abstract: Automatically generating slide decks from source documents is an important application of large language models (LLMs). Existing benchmarks primarily assess slide completeness and technical depth, while overlooking the target audience as a critical real-world factor. For instance, specialists demand rigorous proofs, whereas decision-makers prioritize actionable conclusions. To bridge this gap, we introduce X+Slides, a benchmark specifically designed for audience-conditioned slide generation. Built on a diverse corpus spanning 113 topics and seven presentation scenes, X+Slides employs a dynamic evaluation framework constructed from 8,133 deduplicated, source-grounded probes. By assigning audience-specific utility weights to the same source-grounded probes, X+Slides reports four complementary metrics: Audience Coverage measures how much audience-essential information is conveyed, Domain-wise Coverage shows which information types are covered, Efficiency measures delivered utility per unit of attention cost, and Correctness verifies whether slide claims are supported by the source. Experiments on DeepPresenter, SlideTailor, and NotebookLM show that current systems can recover a substantial but still incomplete part of audience-essential information: at $\tau_A=0.7$, DeepPresenter reaches a best Audience Coverage of 0.714, SlideTailor reaches 0.594, and the NotebookLM ablation reaches 0.853 while showing clear grounding differences. These results indicate that visual quality and broad topic coverage should not be treated as evidence support without source-grounded evaluation.

06.
arXiv (CS.LG) 2026-06-19

The Correctness Illusion in LLM-Generated GPU Kernels

arXiv:2606.20128v1 Announce Type: cross Abstract: Benchmarks for LLM-generated GPU kernels (KernelBench, TritonBench, GEAK) score correctness through fixed-shape, small-sample allclose-style checks. The number of inputs varies between benchmarks. The shape, dtype, and tolerance are fixed for each kernel. We test that oracle empirically. We construct a controlled corpus of 24 Triton and CPU stand-in kernels (15 correct controls and 9 LLM-style buggy variants seeded with documented transcription errors) and re-evaluate it under op-schema-aware seeded fuzzing with a high-precision (fp64) CPU reference and per-(op, dtype) absolute tolerances. The seeded oracle flags 9 of 9 buggy kernels and passes 15 of 15 correct controls, at zero precision cost on controls. We extend the corpus to 26 ops (adding a flash-attention pair) and re-run the same protocol on five GPU classes (RTX 3060, A10, L40S, A100 SXM4, H100 NVL). The verdicts are identical across all five GPUs: 10 of 10 illusions caught and 16 of 16 controls clean. The corpus result is about LLM-style transcription bugs that the allclose-on-one-shape oracle certifies as correct, not about the bug rate of any specific deployed LLM. Every flagged failure replays byte-for-byte from a stored seed.

07.
arXiv (CS.LG) 2026-06-16

An Exploratory Study of Blood Glucose Estimation from Photoplethysmography Signals using Machine Learning

arXiv:2606.15927v1 Announce Type: new Abstract: Diabetes and extreme blood sugar levels are some of the major health problems faced by humans today across the world. While Continuous Glucose Monitoring (CGM) has emerged as an effective technology for management of diabetes as well as for monitoring blood sugar levels, this technology has traditionally been invasive (that is, requiring the piercing of the skin) and carries the risk of irritation, induration, etc. This highlights the need for accurate and non-invasive CGM methods that can be deployed at scale. With the emergence of various sensing technologies and their integration in wearables like the smart-watch, we now have the capability to continuously monitor body signals like the Photoplethysmogram (PPG) in a non-invasive manner. Having the ability to continuously monitor blood glucose through CGMs and continuously monitor PPG signals through a smart-watch offers an opportunity to get dense data on these two, opening the possibility of building machine learning and deep learning based models to estimate blood glucose level from PPG signals. In this work, we first present a paired dataset comprising continuous PPG signals from a smartwatch along with glucose values recorded using a CGM device. We also present the results of some preliminary experimental explorations performed on our dataset. These preliminary results suggest that some predictive signals may exist, though more exploration is needed with more data from a larger number of individuals. The dataset can be accessed at https://zenodo.org/records/20577959

08.
medRxiv (Medicine) 2026-06-12

Microbial etiology, antibiotic susceptibility profiles, and multidrug resistance of urinary tract infections at a secondary healthcare facility in Ghana

Background: Rising antibiotic resistance challenges empirical therapies for urinary tract infections (UTIs). This study evaluated the microbial etiology, susceptibility profiles, and multidrug resistance (MDR) patterns of uropathogens among outpatients at the Berekum Holy Family Hospital, Ghana. Methods: This cross-sectional study (February to August 2021) screened 263 symptomatic outpatients. Mid-stream urine samples underwent quantitative culture, biochemical identification, and antimicrobial susceptibility testing via the Kirby-Bauer disc diffusion method following the 2021 CLSI guidelines. Results: Significant bacteriuria prevalence was 22.8% (60/263). UTIs predominated in females (78.3%, 47/60; p = 0.1501) and individuals [≥]45 years (33.3%, 20/60). Gram-negative rods accounted for 90.0% of isolates, primarily Escherichia coli (26.7%), Citrobacter spp. (25.0%), and Enterobacter spp. (21.7%); Staphylococcus aureus (10.0%) was the only Gram-positive pathogen. Extreme phenotypic resistance was observed against piperacillin/tazobactam (98.3%), cefotaxime (93.3%), tetracycline (88.3%), and cefoperazone (85.0%). Conversely, highest therapeutic susceptibilities were retained by amikacin (78.3%), levofloxacin (61.7%), and gentamicin (58.3%). Conclusion: The high prevalence of MDR uropathogens against advanced beta-lactamase inhibitor combinations and cephalosporins necessitates an immediate re-evaluation of regional empirical protocols. Amikacin, levofloxacin, and gentamicin remain viable options prior to culture confirmation. These findings establish a crucial phenotypic baseline to guide localized prescribing policies and regional antimicrobial resistance tracking strategies.

09.
arXiv (math.PR) 2026-06-18

Metastability for the Curie-Weiss-Potts model with unbounded random interactions

arXiv:2505.11260v2 Announce Type: replace Abstract: We analyse the metastable behaviour of the disordered Curie–Weiss–Potts (DCWP) model subject to a Glauber dynamics. The model is a randomly disordered version of the mean-field $q$-spin Potts model (CWP), where the interaction coefficients between spins are general independent random variables. These random variables are chosen to have fixed mean (for simplicity taken to be $1$) and well defined cumulant generating function, with a fixed distribution not depending on the number of particles. The system evolves as a discrete-time Markov chain with single spin flip Metropolis dynamics at finite inverse temperature $\beta$. We provide a comparison of the metastable behaviour of the CWP and DCWP models, when $N \to \infty$. First, we establish the metastability of the CWP model and, using this result, prove metastability for the DCWP model (with high probability). We then determine the ratio between the metastable transition time for the DCWP model and the corresponding time for the CWP model. Specifically, we derive the asymptotic tail behavior and moments of this ratio. Our proof combines the potential-theoretic approach to metastability with concentration of measure techniques, the latter adapted to our specific context.

10.
arXiv (CS.CV) 2026-06-12

GetNetUPAM: Ecologically Informed Nested Cross-Validation and Noise-Robust Attention for Marine Bioacoustic Monitoring

Deploying reliable bioacoustic monitoring systems requires models that generalize under high-noise, low-SNR conditions and evaluation protocols that expose deployment-relevant failure modes, gaps largely unaddressed in current UPAM practice. Intrinsic noise, variable propagation, and mixed biological and anthropogenic sources induce distribution shifts that conventional models and single-split evaluations obscure, inflating performance and masking instability. We introduce GetNetUPAM, a hierarchical nested cross-validation framework that uses the nested stage to quantify model stability rather than tune for inflated hold-out scores. By partitioning data into site-year blocks, GetNetUPAM preserves ecological heterogeneity and forces each outer fold to represent a distinct environmental regime, preventing overfitting to localized noise or sensor artifacts. Inner stratified folds measure generalization across the full UPAM signal distribution, enforcing strict separation between model development and the outer held-out deployment condition. Using GetNetUPAM, we evaluate the Adaptive Resolution Pooling and Attention Network (ARPA-N), a CNN architecture for irregular spectrogram dimensions. ARPA-N integrates CBAM spatial attention as a learned noise suppressor, producing attention maps that localize true call structure and avoid the global, non-biological cues exploited by standard CNNs on long-window data. Under GetNetUPAM, ARPA-N generalizes robustly across diverse environmental regimes. In the zero-training support Balleny Islands region, it reduces false positives per hour by over an order of magnitude (approximately 10x) at fixed 90 percent recall, yielding consistently improved metrics across folds. These advances provide a reproducible benchmark and move UPAM toward scalable, deployment-reliable ecological monitoring.

11.
arXiv (CS.CL) 2026-06-11

On the Optimal Reasoning Length for RL-Trained Language Models

Reinforcement learning substantially improves reasoning in large language models, but it also tends to lengthen chain-of-thought outputs and increase computational cost. Although length-control methods have been proposed, the length-accuracy relationship they induce remains unclear. We train policies with several length-control methods on multiple base models in a controlled setup and find that, across both mathematical reasoning and code generation, accuracy is non-monotonic in output length, peaking at an intermediate value. Mode accuracy, however, continues to improve with length even in settings where sample accuracy plateaus or declines, indicating that the non-monotonic length-accuracy relationship is driven by dispersion around an increasingly correct center.

12.
arXiv (CS.LG) 2026-06-15

A Stationarity-and-Coupling Criterion for Training-Free Time-Lagged Spectral Embeddings of Multivariate Time Series

arXiv:2606.13823v1 Announce Type: new Abstract: We study training-free fixed-length descriptors for multivariate time series and ask not merely whether such a descriptor performs well, but when it can be expected to work at all. Our object of study is $D(\tau)$, built from a time-lagged correlation matrix truncated at the Marchenko-Pastur edge so that only signal-bearing eigenvalues survive and classified by cosine similarity to class centroids with zero learned parameters. The central contribution is not the descriptor but a falsifiable applicability criterion for it. Working from a stationary Gaussian VAR(1) model, we argue that $D(\tau)$ separates two classes when the signals are approximately stationary and the class information lives in their cross-channel temporal coupling rather than in marginal per-channel power. We derive, semi-formally, three consequences: a distinguishability condition, why the static ($\tau=0$) covariance collapses to chance, and why a stationary but power-discriminated paradigm defeats the descriptor. The criterion is operational: a two-part pre-flight test – an augmented Dickey-Fuller stationarity check and a power-baseline saturation check – predicts applicability before any training. We validate both halves on a mixed assortment. On four paradigms that satisfy the criterion (Sleep-EDF, BCI-IV-2a, MIT-BIH, ESC-50) the descriptor is competitive with strong baselines at a fraction of their cost, reaching $88.5\pm4.5\%$ under 20-subject leave-one-subject-out on Sleep-EDF on a single CPU thread. On three that violate it – non-stationary ERPs, and financial-volatility and wearable-stress regimes that are power-discriminated – it fails exactly as the pre-flight predicts, and these negatives are the more informative half. We are explicit that $D(\tau)$ is not the most accurate representation; its value is a compact, training-free embedding whose domain of validity is known in advance.

13.
arXiv (CS.AI) 2026-06-24

Learning to Trigger: Reinforcement Learning at the Large Hadron Collider

arXiv:2606.23993v1 Announce Type: cross Abstract: High-throughput scientific facilities such as the Large Hadron Collider depend on real-time event filtering (triggering) under tight constraints on bandwidth, latency, and storage. In practice, trigger menus are largely static and hand-tuned and can become suboptimal as detector conditions, pileup, and background composition drift over time. We cast online threshold tuning as a sequential decision-making problem: a reinforcement learning agent ingests streaming summaries of recent rates and signal-sensitive features and updates trigger thresholds to maximize signal efficiency while tracking a target background rate within a tolerance band. We adapt Group-Filtered Policy Optimization (GFPO) to streaming control and introduce two variants (GFPO-F, GFPO-FR) that enforce background rate feasibility during training. On a benchmark that emulates realistic collider operation, we study two representative triggers: a total transverse energy ($H_{T}$) trigger sensitive to pileup variation, and an anomaly-detection (AD) trigger based on reconstruction loss for rare or non-standard signatures. On Monte Carlo streams, our agent increases the fraction of in-tolerance time intervals by 48\% ($H_T$) and 28\% (AD), with a cumulative gain of up to 2\% in signal efficiency on those in-tolerance intervals. Transferring from simulation to real collision data (CMS Run 283408), the same agent, without fine-tuning, achieves a 56\% ($H_T$) and 28\% (AD) in-tolerance improvement over baselines, with further signal-efficiency gain on both triggers. To our knowledge, this is the first demonstration of RL-based trigger control on real Large Hadron Collider collision data. Code is available at https://github.com/Zixind/GFPO\_LHC.

14.
arXiv (CS.AI) 2026-06-19

DynAMO:Dynamic Asset Management Orchestration via Topological Multi-Agent Scheduling

arXiv:2606.19382v1 Announce Type: cross Abstract: While LLM-powered agents offer end-to-end automation for industrial asset lifecycles, real-world Industry 4.0 deployment is hindered by latency, concurrency instability, and safety risks. We present DynAMO (Dynamic Asset Management Orchestration), a deployment-ready engine using a Plan-then-Execute architecture to generate verifiable workflow graphs. DynAMO supports both SequentialWorkflow (topological execution) and ParallelWorkflow (dependency-aware concurrency). By dynamically identifying independent tasks, DynAMO preserves structural correctness and safety while significantly improving efficiency through controlled reasoning overlap. Across six controlled experiments on the AssetOpsBench industrial benchmark, DynAMO demonstrates substantial performance and robustness gains. Parallel execution reduces end-to-end latency by a median of 1.6x over sequential orchestration, rising to 1.8x on highly parallelizable workflows. After instrumenting external tool calls with realistic latencies, a latency decomposition shows that LLM reasoning and orchestration still account for more than 90% of execution time, identifying model inference as the primary system bottleneck. Structured context pruning reduces inference latency by approximately 30%, and DynAMO maintains correct functional behaviour (task completion, agent sequencing, and output quality) while exhibiting graceful degradation under controlled fault injection. Reproducibility analysis further confirms stable execution under repeated runs, with parallel scheduling reducing latency variance. These findings establish DynAMO as a practical blueprint for scalable, safe, and latency-aware agent deployment in Industry 4.0 automation pipelines. Code is available at: https://github.com/kushwaha001/DynAMO

15.
arXiv (quant-ph) 2026-06-17

Canonical regularization of the stationary Coulomb problem and an Aufbau-like spectral ordering

arXiv:2606.17359v1 Announce Type: new Abstract: The stationary hydrogen atom has Coulomb degeneracy across orbital levels, whereas the Aufbau/Madelung ordering is an empirical, many-electron rule established in atomic physics. We examine the hydrogen atom through a regularized de Broglie–Bohm representation, in which stationary amplitude current constraints generate separable Sturm–Liouville branches. In this formulation, the radial, orbital, and magnetic sectors acquire canonical Langer-like inverse square corrections. The modified boundary value problems allow analytical solutions and produce a hydrogen-like spectrum with regularized radial and angular indices. Consequently, radial Coulomb quantization acquires an orbital dependent shift, lifting the Coulomb degeneracy and producing a spectral ordering that follows the Aufbau/Madelung sequence. On this basis, we construct the ordering of the regularized de Broglie–Bohm states and show that the spectral structure retains the standard degenerate Rydberg sequence in the l=0 sector. The separated amplitudes are represented by generalized special function branches, including the associated Laguerre, Legendre, and Bessel functions with non-integral parameters arising from regularized separation. Therefore, the treatment is intended as an analytical examination of spectral ordering in a regularized one center Coulomb problem rather than as a replacement for the many electron atomic structure theory. Keywords: de Broglie–Bohm representation; Coulomb spectrum; canonical regularization; Langer correction; Sturm–Liouville equations; Aufbau principle; Madelung ordering; associated Legendre functions; associated Laguerre functions; Bessel functions.

16.
arXiv (CS.LG) 2026-06-19

Closing the Social-Semantic Gap: SPSD for Edge-Based Prompt Compression in Cloud LLM Inference

arXiv:2606.19364v1 Announce Type: new Abstract: The prefill stage of Large Language Model (LLM) inference is a growing contributor to cloud-scale energy cost. Many consumer-support and conversational prompts contain social scaffolding: politeness markers, apologetic preamble, repetition, and rapport-building language that is important for human communication but carries low marginal information for machine reasoning. We call this discrepancy the Social-Semantic Gap. We present SPSD (Sentiment Preserving Semantic Distillation), an edge-based pipeline that compresses user prompts using a 4-bit quantised Small Language Model before transmission to a cloud-deployed LLM. Evaluation on a 248-prompt corpus using Gemma-2-2B-Instruct (Q4_K_M) as the SLM and Llama-3.1-8B-Instruct as the cloud evaluation model yields a mean input token saving of 99.9 tokens per distilled call, with all 146 distilled calls yielding positive savings. Response quality, assessed by blind LLM-as-judge scoring across 121 pairs, is non-inferior to the raw path within a pre-specified 1-point margin on a 15-point rubric; the judge awarded 43 percent ties, 28 percent distilled wins, and 29 percent raw wins. Cosine similarity is mixed: mean 0.682, median 0.712, with 54.1 percent of pairs above the 0.70 reference threshold. Safety-critical domains are conservatively routed to passthrough via rule-based gates. Per-call net energy saving is estimated at 70-270 uWh under stated assumptions. SPSD shows that on-device prompt distillation can reduce cloud LLM input-token cost while preserving response quality within a practical non-inferiority margin.

17.
arXiv (CS.AI) 2026-06-12

Mod-Guide: An LLM-based Content Moderation Feedback System to Address Insensitive Speech toward Indigenous Ethnic and Religious Minority Communities

arXiv:2606.13397v1 Announce Type: cross Abstract: Language operates as a mechanism of both marginalization and resistance, especially for minority communities navigating insensitive and harmful speech online. As content moderation increasingly depends on large language models (LLMs), concerns arise about whether these systems can recognize culturally insensitive speech-language that disregards or marginalizes the cultural and religious perspectives of historically underrepresented communities, often through implicit erasure, misrepresentation, or normative framing, rather than overt hostility. Focusing on Bangladesh's Hindu and Chakma communities – the country's largest religious and Indigenous ethnic minorities, respectively – this paper investigates the epistemic limits of LLM-based moderation systems and explores methods for incorporating minority perspectives. We co-created a culturally grounded corpus of insensitive speech with community members and integrated their narratives into moderation pipelines using retrieval augmented generation (RAG). Our tool, Mod-Guide, improves LLM sensitivity to minority viewpoints by leveraging contextual cues derived from lived experience. Through mixed-method evaluations involving both minority and majority participants, we demonstrate that RAG-enhanced moderation responses are more contextually accurate and perceived differently across ethnic lines. This work advances research in human-computer interaction, AI ethics, and social computing by foregrounding restorative justice and hermeneutical inclusion in the design of content moderation systems.

18.
arXiv (CS.CL) 2026-06-11

TokenRatio: Principled Token-Level Preference Optimization via Ratio Matching

Direct Preference Optimization (DPO) is a widely used RL-free method for aligning language models from pairwise preferences, but it models preferences over full sequences even though generation is driven by per-token decisions. Existing token-level extensions typically decompose a sequence-level Bradley-Terry objective across timesteps, leaving per-prefix (state-wise) optimality implicit. We study how to recover token-level preference optimality using only standard sequence-level pairwise comparisons. We introduce Token-level Bregman Preference Optimization (TBPO), which posits a token-level Bradley-Terry preference model over next-token actions conditioned on the prefix, and derive a Bregman-divergence density-ratio matching objective that generalizes the logistic/DPO loss while preserving the optimal policy induced by the token-level model and maintaining DPO-like simplicity. We introduce two instantiations: TBPO-Q, which explicitly learns a lightweight state baseline, and TBPO-A, which removes the baseline through advantage normalization. Across instruction following, helpfulness/harmlessness, and summarization benchmarks, TBPO improves alignment quality and training stability and increases output diversity relative to strong sequence-level and token-level baselines.

19.
arXiv (CS.LG) 2026-06-18

Unlocking air traffic flow prediction through microscopic aircraft-state modeling

arXiv:2605.10083v2 Announce Type: replace Abstract: Short-term air traffic flow prediction in terminal airspace is essential for proactive air traffic management. Existing approaches predominantly model traffic flow as aggregated time series. However, traffic dynamics are governed by aircraft states and their interactions in continuous airspace. Such aggregation obscures fine-grained information, including aircraft kinematics, boundary interactions, and control intent. Here we present AeroSense, a state-to-flow modeling paradigm that predicts future traffic flow directly from instantaneous airspace situations represented as dynamic sets of aircraft states derived from ADS-B trajectories. By establishing an end-to-end mapping from microscopic aircraft states to future regional traffic flow, AeroSense preserves aircraft-level dynamics while naturally accommodating varying traffic density without relying on historical look-back windows. Experiments on a large-scale real-world dataset show that AeroSense exhibits admirable predictive accuracy and robustness over aggregation-based forecasting approaches, particularly during high-density traffic periods. These findings suggest that aircraft-state situation modeling provides a promising alternative to conventional time-series forecasting in air traffic flow management.

20.
arXiv (CS.CL) 2026-06-16

SAG: SQL-Retrieval Augmented Generation with Query-Time Dynamic Hyperedges

Retrieval-Augmented Generation (RAG) offers an effective approach for large language models to access external knowledge. However, existing methods rely on dense similarity retrieval and face inherent limitations in handling structured constraints and multi-hop reasoning. Incorporating knowledge graphs partially alleviates these issues, but at the cost of semantic fragmentation, high maintenance overhead, and difficult incremental updates. This paper introduces SAG (SQLRetrieval Augmented Generation), a structured architecture for retrieval and agent systems. Instead of pre-building a global static graph, SAG converts each chunk into one semantically complete event and a set of indexing entities, then uses SQL join queries to dynamically link events that share entities into local hyperedges,constructing, at query time, a dynamically instantiated local index structure. This design avoids the need for global graph rebuilding and ongoing maintenance; the system naturally supports incremental writes, concurrent processing, and continuous scaling through its reliance on standard database infrastructure. Across HotpotQA, 2WikiMultiHop, and MuSiQue, three standard multi-hop benchmarks,SAG achieves the best results on 8 out of 9 Recall@K metrics, reaching 80.0% Recall@5 on MuSiQue, the benchmark with the highest multi-hop reasoning demands.SAG has also been deployed at a production scale of hundreds of millions of data items, with online retrieval latency kept within seconds. Project site and code are available at https://github.com/Zleap-AI/SAG-Benchmark.

21.
arXiv (CS.LG) 2026-06-12

An Empirical Study on Predictive Maintenance for Component X in Heavy-Duty Scania Trucks

arXiv:2606.12486v1 Announce Type: new Abstract: Condition-based Predictive Maintenance (PdM) for truck fleets has gained momentum in recent years. This maintenance strategy aims to minimize unplanned downtimes and reduce costs by monitoring the health status of vehicles and taking proactive action based on their condition. However, the implementation of condition-based PdM systems is challenging due to the large volume of data generated by the trucks, the inherent complexity of detecting failures through sensor data and the difficulties in finding cost-effective trade-offs in the solution's implementation. In this paper, we define and validate a condition-based PdM methodology built on the assumption that the wear-and-tear state of the monitored component can be represented as a monotonically non-decreasing time series. It involves selecting only the most recent observations from the time series and transforming them into a tabular format for classification using machine learning (ML) models designed for tabular data. Our results indicate that the proposed methodology reduces costs on the Scania Component X dataset compared to current state-of-the-art (SOTA) approaches, while also simplifying the modeling process through AutoML.

22.
arXiv (CS.AI) 2026-06-24

Prob-BBDM: a Probabilistic Brownian Bridge Diffusion Model for MRI sequence image-to-image translation

arXiv:2606.24313v1 Announce Type: new Abstract: AI-driven image-to-image synthesis is rapidly advancing, with growing applications in medical imaging. Multi-modal image analysis plays a crucial role in optimizing examination quality, yet acquiring multiple imaging modalities in clinical settings remains resource-intensive and time-consuming, especially for 3D imaging. To address this challenge, we propose a novel image-to-image translation model based on Brownian Bridge Diffusion Models (BBDM), which synthesizes magnetic resonance imaging (MRI) sequences from 2D axial slices. Our approach integrates a variational encoder-guided diffusion mechanism, leveraging probabilistic image distributions to enhance synthesis quality. Evaluated on the BraTS 2021 dataset, our Probabilistic-BBDM (Prob-BBDM) achieves superior performance across multiple translation tasks, reaching up to 88.46% SSIM and 26.09 dB PSNR, with consistent improvements over baselines. Notably, our diffusion process requires only 4 steps, making it computationally efficient while maintaining high-quality synthesis. To further validate generalizability, we test Prob-BBDM on an external third-party dataset, demonstrating consistent performance across domains. Additionally, we assess the clinical utility of the synthesized slices by using them as input to a pre-trained segmentation model. Tumor segmentation yields a Dice score of 88.71% and an HD95 of 3.49 mm, confirming that the synthesized slices preserve critical diagnostic information. These results highlight the potential of Prob-BBDM for high-quality, efficient, and generalizable MRI synthesis, offering a promising step toward improved medical image translation.

23.
arXiv (CS.LG) 2026-06-17

Deep Reinforcement Learning for Minimum Zero-Forcing Sets

arXiv:2606.18106v1 Announce Type: new Abstract: This paper explores the problem of finding the minimum zero-forcing set on undirected graphs and proposes an adapted machine-learning framework to solve the problem. The minimum zero-forcing set problem is a graph coloring problem where the color of an initial set of nodes propagates throughout a network. The set of nodes is zero-forcing if it forces all uncolored nodes to change color under the constraint of the color-change rule. There are several applications to this problem across different domains such as network science, network control, and designing logical circuits. Finding the minimum zero-forcing set is shown to be NP-hard. We propose a reinforcement learning framework, SD-ZFS, that adapts the S2V-DQN architecture to the ZFS problem. We train several models on this adapted framework and analyze the performance across graph datasets that have varying structures. We evaluate how the models trained on the framework generalize, scale, and transfer to different network types. The results demonstrate the effectiveness of the framework when compared against the optimal solution and greedy heuristic. We provide further insight into how the ZFS problem can be solved through machine-learning and the influence of network structure on the problem.

24.
arXiv (CS.CL) 2026-06-16

Contrastive-Difference CKA Reveals Concept-Specific Structural Alignment Across Language Model Architectures

Authors:

Do different LLM architectures encode high-level concepts in structurally compatible ways? We systematically characterize a geometric-functional universality dissociation: across multiple concept domains and architectural families, moderate geometric convergence coexists with near-perfect functional transfer. Using contrastive-difference CKA (CKA_Delta), a training-free diagnostic that computes kernel alignment on per-sample contrastive differences, we isolate concept-specific convergence from generic similarity – achieving significant discrimination where standard CKA cannot. The dissociation replicates across all six concept domains we test (five with p =70B models. We position CKA_Delta as a practical regime classifier and architectural outlier detector (Gemma: d = 1.08, AUC = 0.79) rather than an absolute transfer-accuracy predictor, providing a training-free diagnostic for cross-architecture concept monitoring.

25.
arXiv (CS.CV) 2026-06-16

Efficient Flow Matching using Latent Variables

Flow matching models have shown great potential in image generation tasks among probabilistic generative models. However, most flow matching models in the literature do not explicitly utilize the underlying clustering structure in the target data when learning the flow from a simple source distribution like the standard Gaussian. This leads to inefficient learning, especially for many high-dimensional real-world datasets, which often reside in a low-dimensional manifold. To this end, we present $\texttt{Latent-CFM}$, which provides efficient training strategies by conditioning on the features extracted from data using pretrained deep latent variable models. Through experiments on synthetic data from multi-modal distributions and widely used image benchmark datasets, we show that $\texttt{Latent-CFM}$ exhibits improved generation quality with significantly less training and computation than state-of-the-art flow matching models by adopting pretrained lightweight latent variable models. Beyond natural images, we consider generative modeling of spatial fields stemming from physical processes. Using a 2d Darcy flow dataset, we demonstrate that our approach generates more physically accurate samples than competing approaches. In addition, through latent space analysis, we demonstrate that our approach can be used for conditional image generation conditioned on latent features, which adds interpretability to the generation process.