Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-17

A multistate model of frailty progression after severe infections in adults >=65 years in England: a matched-cohort study

Background Evidence on frailty progression following severe infections is limited. We compared rates of transition to greater frailty or death between adults with and without severe infection in England. Methods We conducted a matched-cohort study among adults aged [≥]65 years (1,452,117: median age 76 years, 45% male) in Clinical Practice Research Datalink Aurum (2006-2019). Adults with severe infection (hospitalised primarily due to infection) were matched on calendar time to individuals without severe infection on age, sex, and primary care practice. The admission date was used as index date and same was assigned to matched unexposed adults. We measured frailty using Electronic Frailty Index, a proportion of 36 health deficits in validated categories (Fit 0-0.12, Mild >0.12-0.24, Moderate >0.24-0.36, Severe >0.36). In a time-varying Markov multistate model, we focused on forward transitions from baseline or intermediate frailty states to higher states or death. For each transition, we used Cox regression to estimate cause-specific transition hazard ratios (HR) with 95% confidence intervals (CIs), comparing adults with and without severe infection. We adjusted for baseline frailty score, age, sex, deprivation, harmful alcohol use, smoking, and primary care infection history 5 years before index date. We estimated state occupancy probabilities, and expected length of stay (ELOS) in each state at year five among adults with and without severe infection. We explored effect modification by infection type. Results Across all transitions, severe infection was associated with higher adjusted hazards of transitioning to worsening frailty or death, HR, 95% CI: (fit to: mild[1.56, 1.54-1.58], moderate[2.51, 1.79-3.51], death[4.57, 4.50-4.65]; mild to: moderate[1.52, 1.50-1.53], severe[1.90, 1.43-2.52], death[2.67, 2.64-2.70]; moderate to: severe[1.40, 1.38-1.42], death[1.87, 1.85-1.90]; severe to death[1.48, 1.46-1.50]). Transition hazard ratios were strongest for lower respiratory tract infections, followed by sepsis, urinary tract infections, meningitis/encephalitis, gastroenteritis, and skin and soft tissue infections. At five years, adults with severe infection had higher probabilities of transitioning to greater frailty or death across all transitions and lower ELOS in each frailty state than those without severe infection. Interpretation Severe infections may accelerate frailty deterioration in older age. Prevention through vaccination, early detection, and prompt management may help mitigate this decline.

02.
arXiv (CS.CV) 2026-06-17

Bridging Spatial And Frequency Views For Disaster Assessment: Benefits And Limitations

Rapid assessment of building damage from satellite imagery is essential for effective disaster response and recovery. While most deep learning methods rely on spatial-domain features, frequency-domain representations can capture complementary structural cues such as debris patterns and collapse-induced textures. This study presents a controlled comparison of spatial-domain, frequency-domain, and dual-domain deep learning approaches for multi-class building damage classification using post-disaster imagery from the xView2 (xBD) dataset. To ensure fairness, all models are built on an EfficientNet-B0 backbone and trained under identical settings, differing only in their input representations and fusion strategies. Performance is evaluated using accuracy, macro F1-score, per-class metrics, and confusion matrices. Results show that dual-domain models provide measurable improvements over single-domain approaches. The dual spatial configuration achieves the highest test accuracy (0.4688) and lowest loss, while the spatial-only model attains the best macro F1-score (0.4254), indicating more balanced class performance. In contrast, frequency-only models perform worst and exhibit overfitting, suggesting limited generalization. Despite these gains, all models struggle to detect subtle damage levels, particularly the Minor class, due to class imbalance and fine-grained visual ambiguity. While dual-domain approaches improve detection of severe damage, challenges remain. These findings highlight the benefits and limitations of hybrid representations and motivate future work on data balancing, advanced fusion, and regularization.

03.
arXiv (quant-ph) 2026-06-11

A Cryogenic Uniaxial Strain Cell for Quantum Devices

arXiv:2606.11485v1 Announce Type: new Abstract: Mechanical strain is a powerful resource for tuning quantum systems, but existing piezoelectric strain cells are generally optimized for fragile, high-aspect-ratio single crystals rather than the thick, square-profile chips typical of semiconductor quantum devices. Furthermore, adapting these cells for qubits requires accommodating dense RF and DC wiring while maintaining strict electrical isolation from high-voltage piezo actuators. Here, we present a piezoelectric uniaxial strain cell designed to homogeneously strain thick, square-profile substrates. We introduce a highly symmetric dual-chip loading configuration that effectively suppresses flexural deformation and shear stress. The cell integrates a high-density RF/DC interposer to support standard wire bonding and encloses the actuators in a grounded Faraday cage to prevent unwanted Stark shifts in the device layer. Finite element simulations confirm that combining stiff actuators with this symmetric mounting drastically improves strain homogeneity. Finally, we validate the apparatus experimentally by applying uniaxial strain to a 200 $\mu$m thick silicon die. Surface strain measurements demonstrate an applied strain of 215 $\mu\epsilon$ for 200 V applied piezo bias.

04.
arXiv (CS.AI) 2026-06-16

Skill-to-LoRA: From Using Skills to Learning Behaviors for Token-Efficient LLM Agents

arXiv:2606.16769v1 Announce Type: new Abstract: Agent skills are commonly distributed as SKILL.md files: human-readable procedural documents that describe workflows, tools, resources, and domain conventions. While convenient for inspection and reuse, this design requires the same reusable procedure to be repeatedly injected into the runtime context. We propose Skill-to-LoRA(S2L), a behavior-centric skill representation that replaces runtime skill text with skill-specific LoRA adapters. Rather than compressing the skill document itself, S2L models the behavioral change induced by the skill text: offline, the complete SKILL.md is used to synthesize skill-guided demonstrations; online, the full document is omitted and the corresponding LoRA adapter is dynamically loaded to activate the learned skill behavior. We evaluate S2L with Qwen3.6-27B on a 21-skill subset of SWE-Skills-Bench. Compared with the no-skill and Full Skill Text baselines, S2L improves pass rate by 2.9 and 5.2 percentage points, respectively, while reducing per-step token cost by 6.6% relative to Full Skill Text prompting. S2L matches or improves Full Skill Text on 18/21 skills and the no-skill baseline on 15/21 skills. Control experiments further show that the gains depend on skill-specific adapter alignment: Wrong-LoRA and Shared-LoRA both reduce performance. These results suggest that many procedural agent skills can be converted from runtime instructions into trainable, dynamically loadable behavioral modules. Code will be released upon acceptance.

05.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.

06.
arXiv (CS.AI) 2026-06-15

Korzhinskii-Net: Physics-Informed Neural Network for Sub-Surface Mineral Prospectivity Modelling

作者:

arXiv:2606.13695v1 Announce Type: cross Abstract: Mineral prospectivity modelling (MPM) underpins exploration economics, yet most operational pipelines reduce to data-driven classifiers trained on shallow surface proxies. Such models are blind to the subsurface physics that actually localises ore: heat advection, fluid flow, and lithology-dependent precipitation. We present Korzhinskii-Net, a 2-D radial physics-informed neural network (PINN) that couples Darcy flow, advective-diffusive heat transport, and a softplus-saturated reaction rate into a single differentiable forward model, weakly supervised by surface and remote-sensing proxies. The network is named after Dmitri S. Korzhinskii (1899-1985), whose theory of infiltration metasomatism provides the physical scaffold. We evaluate Korzhinskii-Net on five ore provinces spanning four commodity classes – Norilsk (Ni-Cu-PGE), Pechenga (Ni-Cu sulphide), Udokan (sandstone-hosted Cu), Sukhoi Log (orogenic Au), and Mirny (kimberlitic diamond) – under a fair, leakage-controlled 5-fold cross-validation protocol with hard ring-shaped negatives. Korzhinskii-Net attains a mean PR-AUC of 0.885 versus 0.281 for the strongest classical baseline (gradient boosting), and a mean fractional rank of 0.019 versus 0.413. The improvement is consistent across all five provinces and four commodity systems, suggesting that physics-informed differentiable simulators, even when constrained only by global open-data proxies, can recover localisation patterns that pure feature-based learners systematically miss. We release the full pipeline and evaluation harness as open source.

07.
arXiv (CS.AI) 2026-06-17

Trust-Aware Multi-Agent Traceability: Confidence-Calibrated Knowledge Graphs for Consistent Software Artifact Management

arXiv:2606.17203v1 Announce Type: cross Abstract: Multi-agent AI systems are increasingly used to automate software engineering tasks including requirements analysis, architecture design, test generation, and traceability linking. When these agents operate as a sequential pipeline over shared software artifacts, errors and low-confidence decisions made by upstream agents propagate to downstream stages, producing orphaned requirements, contradictory links, and compliance gaps that pose significant risks in safety-critical domains. We propose a trust-aware coordination framework where a shared knowledge graph serves as both centralized semantic memory and a coordination surface through which agents assess and build upon each other's contributions using calibrated confidence scores. Our approach introduces a two-stage traceability link prediction pipeline combining embedding-based retrieval with LLM-based multi-criteria analysis, a traceability seeding mechanism that enables comparison between derivation-time and validation-time confidence, and a consistency protocol governing pipeline interactions through confidence threshold gating, confidence divergence detection, and conflict resolution. We evaluate on an automotive software engineering case study measuring link prediction calibration, protocol effectiveness, threshold sensitivity, and the impact of traceability seeding. Ablation studies confirm that confidence calibration is essential for effective pipeline coordination.

08.
arXiv (math.PR) 2026-06-19

The t-Split Two-Periodic Aztec Diamond Model

arXiv:2606.19507v1 Announce Type: new Abstract: In this work we consider an Aztec diamond model split into two unequal regions which are asymptotically fixed in size. Each region is weighted with a distinct two-periodic weighting. We refer to this model as the t-split two-periodic Aztec diamond, to signify its difference from the previous work title Split Two-Periodic Aztec Diamond, where the model was split into two equal regions. We derive an integral expression for the correlation kernel of the model and give a partial description of the scaling limit behavior, along with a conjecture for the remainder. We refer to the larger and smaller sides of the model as the dominant and non-dominant sides, and to the location of the weight change as the interface. The dominant side exhibits a limit shape that depends only on its own weighting and is identical to that of the two-periodic Aztec diamond, while the non-dominant side appears to have a novel limit shape that depends on both weightings and the location of the interface. Lastly, we consider the complete limit shape in the case where the dominant side two-periodic parameter goes to 0.

09.
arXiv (CS.AI) 2026-06-18

DecNefSimulator: A Modular, Interpretable Framework for Decoded Neurofeedback Simulation Using Generative Models

arXiv:2511.14555v4 Announce Type: replace-cross Abstract: Decoded Neurofeedback (DecNef) is a promising non-invasive approach to brain modulation with wide-ranging applications in neuromedicine and cognitive neuroscience. However, progress in DecNef research remains constrained by subject-dependent learning variability, reliance on indirect measures to quantify progress, and the high cost and time demands of experimentation. We present DecNefSimulator, a modular and interpretable simulation framework that formalizes DecNef as a machine learning problem. Beyond providing a virtual laboratory, DecNefSimulator enables researchers to model, analyze and understand neurofeedback dynamics. Using latent variable generative models as simulated participants, DecNefSimulator allows direct observation of internal cognitive states and systematic evaluation of how different protocol designs and subject characteristics influence learning. We demonstrate how this approach can (i) reproduce empirical phenomena of DecNef learning, (ii) identify conditions under which DecNef feedback fails to induce learning, and (iii) guide the design of more robust and reliable DecNef protocols in silico before human implementation. In summary, DecNefSimulator bridges computational modeling and cognitive neuroscience, offering a principled foundation for methodological innovation, robust protocol design, and ultimately, a deeper understanding of DecNef-based brain modulation.

10.
arXiv (CS.CV) 2026-06-15

A Qualitative Review of GenAI-Based Methods for Data Generation and Augmentation in Industrial Computer Vision Applications

AI-driven computer vision applications require a profound database to ensure predictable behaviors and performance. Such predictable behaviors are especially important for industrial applications in gaining trust from users. However, such a database is not readily available in industrial applications, and its acquisition is not trivial either. Active learning methods can be applied to ramp up data within a project deployment to iteratively increase the database, and thus the application predictability. Unfortunately, we observe that this often leads to a loss of user trust in the application, which is difficult to regain once lost. This leads to a "chicken-and-egg" dilemma in which neither the database nor the application is developed. In this work, we review state-of-the-art methods and approaches to further boost the database the initial active data ramp-up phase. Here, we focus on recent advancements in GenAI-based data generation and augmentation methods and review their adaptability on an industrial computer vision classification use case. Although we observe a potential for automatic data ramp-up, we also see a domain miss match in between the source (training environment) and target (industrial use-case) - regarding context defined in natural language and object characteristics.

11.
bioRxiv (Bioinfo) 2026-06-08

HydraMPP: A lightweight library for distributed massive parallel processing in Python - threading at scale.

We now exist in the era of massive datasets from genomics, large language models, and all the known knowledge of humanity right at our fingertips. Much of this data is becoming more accessible; however, processing such data remains an ongoing issue across systems including high performance computing (HPC) infrastructures. Massively parallel computing (MPP) has solved this using a divide and conquer approach by splitting workloads across independent nodes (i.e., central processing units (CPU) allowing for higher scaling of data). The main engine for this in python is Ray; however, it has many issues including a large code space, security issues, debugging opacity, and memory management issues. Here, we present HydraMPP, a lightweight, ease of use and utilization, with high auditability, and with SLURM ergonomics.

12.
arXiv (CS.LG) 2026-06-11

Least-Action-Guided Diffusion for Physical Extrapolation

arXiv:2606.11277v1 Announce Type: new Abstract: Reliable extrapolation remains a central challenge for generative models in computational physics, because models trained over finite ranges of time, parameters, or geometries may produce physically inconsistent predictions outside the training distribution. We introduce a least-action-principle-guided diffusion, LAPG, a framework that promotes physical consistency during inference rather than relying solely on constraints imposed during training. The method combines a conditional score-based diffusion model with an action-derived physical guidance score. In the first stage, the learned score model generates an in-distribution proposal; in the second, an action-based variational prior refines this proposal toward the target out-of-distribution condition. This formulation turns the principle of least action into a differentiable inference-time correction mechanism and provides an alternative to pointwise residual penalties that often require empirical loss balancing. We evaluate LAPG on representative ordinary- and partial-differential-equation systems, including free fall, conservative and dissipative spring-mass dynamics, interacting point vortices, and potential flow over parameterized airfoils. In temporal, parameter, and geometric extrapolation tests, LAPG reduces phase drift, preserves dissipative decay, captures vortex motion, and improves the lift response of airfoil flows compared with training-time physics-informed baselines.

13.
arXiv (CS.CL) 2026-06-16

MosaicQuant: Inlier-Outlier Disaggregation for Unified 4-Bit LLM Quantization

4-bit quantization significantly reduces the memory footprint and accelerates the inference of large language models (LLMs). However, its limited bit-width representation struggles to faithfully capture both dense common values (inliers) and rare large-magnitude values (outliers), causing substantial accuracy degradation. Existing mixed-precision methods mitigate this by retaining outliers in high precision, but at the cost of breaking the uniformity of low-bit execution, introducing precision conversion and extra data movement that undermine practical speedup. We propose MosaicQuant, a unified 4-bit LLM quantization paradigm built on a novel principle of inlier–outlier disaggregation. Rather than elevating outlier precision, MosaicQuant quantizes the full weight matrix into a dense 4-bit base component, where inliers are captured faithfully while outlier are inevitably quantized. A sparse 4-bit residual component is then introduced to compensate for these quantization errors, selectively targeting the most error-critical weight blocks where output distortion is shown to be concentrated. However, a unified representation alone is insufficient, as naïvely executing the sparse residual as a separate kernel still breaks the unified low-bit inference pipeline. To bridge this gap, we introduce ZipperEngine, which fuses sparse block computation into the dense 4-bit GEMM kernel via an overlapped pipeline, unifying not only the representation but also the execution into a single coherent low-bit inference pipeline. Extensive experiments on LLaMA3 and Qwen3 demonstrate that MosaicQuant preserves near-FP16 accuracy while achieving up to $1.24\times$ speedup over the W16A16 baseline.

14.
medRxiv (Medicine) 2026-06-12

The Clinical Characteristics and mortality outcomes of Atrial fibrillation complicating Heart failure with reduced ejection fraction: A prospective study from South Africa

Background: A growing burden of cardiovascular risk factors has raised cardiovascular disease-related mortality in Sub-Saharan Africa (SSA), driving higher prevalence of heart failure with reduced ejection fraction (HFrEF) and its complication with atrial fibrillation (AF). No prospective study has examined AF's clinical impact on HFrEF in SSA. Aim: To determine AF prevalence in HFrEF, describe HFrEF-AF clinical characteristics, and determine AF's impact on mortality. Methods: In this prospective observational study at a tertiary hospital in Johannesburg, 136 HFrEF patients were enrolled and categorised as HFrEF- SR (sinus rhythm) or HFrEF-AF. Baseline clinical characteristics and biochemistry were recorded. Comprehensive echocardiography including left atrial strain by 2D speckle-tracking was performed. Median follow-up was 30.6 months. Results: AF was present in 28 patients (21%). The mean age was 58.7 {+/-} 14.9 years (52.9% male) and differed between groups (p < 0.001). Hypertensive heart disease was the leading cause of HFrEF (36%). Compared with SR, HFrEF-AF patients had poorer health status (KCCQ 27 [16-43] vs 45 [32-60], p < 0.001) and lower left atrial strain (26.2 {+/-} 11.3%, p < 0.001). Guideline-directed medical therapy was suboptimal in the AF group: anticoagulation use was higher than SR (60% vs 9.5%, p < 0.001) but overall inadequate; HFrEF-AF patients received lower median doses of carvedilol (15.6 mg vs 25 mg, p = 0.002) and enalapril (10 mg vs 20 mg, p = 0.004), and fewer received spironolactone (50% vs 75.3%, p = 0.013). Survival was significantly lower in HFrEF-AF (0.41 [0.22-0.61]) versus SR (0.73 [0.61-0.82], p < 0.001). Independent predictors of mortality included prior stroke, lower TAPSE and KCCQ, and higher E/e' and heart rate. Conclusion: AF is common among HFrEF patients in this SSA cohort (though lower than in high-income countries) and associates with worse clinical status, suboptimal therapy, and higher mortality.

15.
arXiv (CS.AI) 2026-06-12

BASENet: Band-Adapted Speech Enhancement Network with Cross-Band Attention

arXiv:2606.12662v1 Announce Type: cross Abstract: Speech enhancement models typically apply uniform capacity across all frequencies, disregarding the non-uniform spectral resolution of human hearing. We propose BASENet, a frequency-adapted architecture that partitions the spectrum into Bark-scale bands and assigns each a scaled-capacity encoder derived from critical-band density, automatically granting deeper branches to perceptually dense low frequencies and lighter ones to high frequencies. A cross-band attention module captures harmonic dependencies across bands through compact frequency-pooled representations at linear complexity. Built on inverted residual blocks with dense connectivity and a convolutional recurrent network, BASENet achieves 3.55 PESQ and STOI~96% on VoiceBank+DEMAND with only 0.83M parameters and 7.3 G~MACs, the fewest parameters among all methods with PESQ > 3.50. A causal variant (3.44 PESQ) surpasses several non-causal baselines, confirming suitability for real-time streaming on resource-constrained devices.

16.
arXiv (CS.LG) 2026-06-19

MolGraphBench: A Benchmark of GNN Architectures for Molecular Regression Tasks

arXiv:2602.20573v3 Announce Type: replace Abstract: Molecules are often represented as SMILES strings, which can be readily converted to hand-crafted descriptors or fingerprints (FP) for molecular property prediction. Research has demonstrated that SMILES can be converted to molecular graphs $G = (V, E)$, with atoms as nodes $(V)$ and bonds as edges $(E)$. These molecular graphs can subsequently be used to train graph neural networks (GNN) models. Despite the recent surge in application of GNN (existing and novel architectures) for molecular property prediction, a rigorous benchmark is still lacking. We propose MolGraphBench, a comprehensive benchmark of four commonly used GNN models for molecular property prediction. Benchmarking results demonstrate graph convolutional network (GCN) and graph isomorphism networks (GIN) as the optimal GNN architectures for molecular graph regression tasks, based on absolute performance, training efficiency, transfer learning and prediction quality. The study also indicates the non-complementary nature of molecular fingerprints in the fusion (GNN-FP) framework. Furthermore, our GNN models achieved performance superior or comparable performance to current state-of-the-art GNN baselines across three datasets (GCN with RMSE of $0.518$ on B3DB, GIN-FP with RMSE of $1.022$ on FreeSolv and GIN with MAE of $63.783$ on RT datasets). Findings from this study indicate that type of GNN-layer, should be treated as a tunable hyperparameter rather than a fixed design choice to achieve superior performance.

17.
arXiv (CS.CV) 2026-06-18

Vines-DB: An RGB image dataset for multi-species ornamental vine segmentation

The Vines-DB dataset contains 1,218 original high-resolution RGB images of seven ornamental vine species collected under field conditions at the Utah Agricultural Experiment Station's Greenville Research Farm in Logan, Utah, USA. The dataset was generated from 168 individual vine plants that were transplanted in 2022 and photographed repeatedly across multiple months during the 2023 and 2024 growing seasons (July-October). Images were captured with an iPhone 16 Pro equipped with a 48 MP camera between 10:00 AM and 12:00 PM under daylight. Vines were grown on 1.2m x 2.4m trellises and photographed from a distance of 1m against black or white Styrofoam backdrops to improve contrast and reduce background noise. The dataset includes Akebia quinata, Campsis radicans, Hydrangea anomala petiolaris, Lonicera x heckrottii, Campsis x tagliabuana 'Madame Galen', Parthenocissus quinquefolia, and Wisteria floribunda. All original images were manually annotated in Roboflow by trained annotators to produce polygon-based instance segmentation masks for eight classes, including seven species and background. After preprocessing and data augmentation, the working dataset was expanded to 2,307 images for model development and evaluation. The augmented dataset was divided into 2,019 training images, 192 validation images, and 96 test images using stratified sampling to maintain balanced representation. Vines-DB supports the development and evaluation of deep learning models for multi-class instance segmentation in precision horticulture and urban ecology. The dataset enables applications such as automated canopy cover estimation, species identification, and scalable field phenotyping. In addition, repeated monthly imaging of the plants captures temporal variation in canopy development and plant appearance, increasing the dataset's utility for segmentation benchmarking under realistic field conditions.

18.
arXiv (CS.CV) 2026-06-17

ERQA-Plus: A Diagnostic Benchmark for Reasoning in Embodied AI

Generalist embodied agents require more than object recognition: they must reason about spatial relations, actions, procedures, human intentions, environmental constraints, and commonsense consequences from situated visual observations. Yet existing visual and embodied question answering benchmarks often provide limited control over the reasoning dependencies being tested, making it difficult to distinguish grounded embodied reasoning from shortcut-driven visual or linguistic pattern matching. We present ERQA-Plus, a diagnostic benchmark for reasoning in embodied AI. ERQA-Plus contains 1,766 question-answer instances grounded in 711 robot-centric images and organized according to a structured taxonomy spanning perceptual, action-centric, social-interaction, navigation-environmental, and contextual commonsense reasoning. The dataset is constructed using a multi-stage generation and validation pipeline that combines taxonomy-guided question generation, automatic quality judging, iterative revision, and human assessment to improve visual grounding, answer validity, and reasoning quality. We benchmark representative general-purpose vision-language models and embodied models, including LLaVA-NeXT-8B, Prismatic-7B, MiniCPM-V-4.5-8B, Qwen3-VL, RoboRefer-8B, and RoboBrain2.5-8B. Although the strongest model, Qwen3-VL-32B, achieves 83.4% overall accuracy and 61.4 SBERT score, category-level results reveal persistent weaknesses in spatial reasoning, procedural reasoning, event prediction, and intention inference. ERQA-Plus therefore provides a fine-grained evaluation framework for measuring not only whether embodied agents answer correctly, but also which forms of embodied reasoning they can and cannot perform reliably. The dataset is available https://huggingface.co/datasets/huggingdas/erqa-plus and the project page at https://github.com/LUNAProject22/erqa-plus.

19.
arXiv (quant-ph) 2026-06-12

Symmetry-Accelerated Classical Simulation of Clifford-Dominated Circuits

arXiv:2510.18977v2 Announce Type: replace Abstract: Classical simulation of quantum circuits plays a crucial role in validating quantum hardware and delineating the boundaries of quantum advantage. Among the most effective simulation techniques are those based on the stabilizer extent, which quantifies the overhead of representing non-Clifford operations as linear combinations of Clifford unitaries. However, finding optimal decompositions rapidly becomes intractable as it constitutes a superexponentially large optimization problem. In this work, we exploit symmetries in the computation of the stabilizer extent, proving that for real, diagonal, and real-diagonal unitaries, the optimization can be restricted to the corresponding subgroups of the Clifford group without loss of optimality. This ``strong symmetry reduction'' drastically reduces computational cost, enabling optimal decompositions of unitaries on up to seven qubits using a standard laptop – far beyond previous two-qubit limits. Additionally, we employ a ``weak symmetry reduction'' method that leverages additional invariances to shrink the search space further. Applying these results, we demonstrate exponential runtime improvements in classical simulations of quantum Fourier transform circuits and measurement-based quantum computations on the Union Jack lattice, as well as new insights into the nonstabilizer properties of multicontrolled phase gates and unitaries generating hypergraph states. Our findings establish symmetry exploitation as a powerful route to scale classical simulation techniques and deepen the resource-theoretic understanding of quantum advantage.

20.
arXiv (CS.CL) 2026-06-17

SpeechDx: A Multi-Task Benchmark for Clinical Speech AI

Speech offers a uniquely informative window into health by simultaneously engaging neurological, motor, respiratory, and vocal systems. Current clinical speech AI methods have largely progressed through isolated condition-specific studies, making results difficult to compare and generalization difficult to assess. We introduce SpeechDx, a large-scale benchmark for clinical speech AI spanning 12 datasets and 27 tasks across diverse health conditions. To enable evaluation across shared clinical mechanisms, SpeechDx structures tasks by the stage of speech production they disrupt: conceptualization, formulation, and articulation. The benchmark tests generalization by including tasks with limited labeled data and evaluating the same health condition across multiple datasets, distinguishing clinically meaningful patterns from dataset artefacts. We systematically evaluate 12 state-of-the-art audio encoders across all tasks and under zero-shot cross-condition transfer. Results show that large-scale speech models represent the strongest overall baselines, domain-specific models improve performance only on closely matched tasks, and no current representation generalizes reliably across the clinical speech landscape. SpeechDx establishes a shared evaluation framework for tracking progress toward general-purpose clinical speech representations

21.
arXiv (CS.CV) 2026-06-11

CountZES: Counting via Zero-Shot Exemplar Selection

Object counting in complex scenes is particularly challenging in the zero-shot (ZS) setting, where instances of unseen categories are counted using only a class name. Existing ZS counting methods that infer exemplars from text often rely on off-the-shelf open-vocabulary detectors (OVDs), which in dense scenes suffer from semantic noise, appearance variability, and multi-instance proposals. Alternatively, random image-patch sampling is employed, which fails to accurately delineate object instances. Since counting is sensitive to exemplar quality, such selection strategies often yield poorly representative exemplars, leading to inaccurate count estimation. To address these issues, we propose CountZES, an inference-only approach for object counting via ZS exemplar selection. CountZES discovers diverse exemplars through three synergistic stages: Detection-Anchored Exemplar (DAE), Density-Guided Exemplar (DGE), and Feature-Consensus Exemplar (FCE). DAE refines OVD detections to isolate precise single-instance exemplars. DGE introduces a density-driven, self-supervised paradigm to identify statistically consistent and semantically compact exemplars, while FCE reinforces visual coherence through feature-space clustering. Together, these stages yield a complementary exemplar set that balances textual grounding, count consistency, and feature representativeness. Experiments on diverse datasets demonstrate CountZES superior performance among ZOC methods while generalizing effectively across domains.

22.
Science (Express) 2026-05-07

TranscriptFormer: A generative cell atlas across 1.5 billion years of evolution | Science

作者: 未知作者

Single-cell transcriptomics is revolutionizing our understanding of cellular diversity, yet comparing transcriptional programs across the tree of life remains challenging. We developed TranscriptFormer, a family of generative foundation models trained on up to 112 million cells spanning 1.53 billion years of evolution across 12 species. We demonstrate state-of-the-art performance on cell type classification, even for species separated over 685 million years of evolution, and zero-shot disease state identification in human cells. Developmental trajectories, phylogenetic relationships and cellular hierarchies emerge naturally in TranscriptFormer’s representations without any explicit training on these annotations. This work establishes a powerful framework for quantitative single-cell analysis and comparative cellular biology, thus demonstrating that universal principles of cellular organization can be learned and predicted across the tree of life.

23.
arXiv (CS.CL) 2026-06-17

EngTrace: A Symbolic Benchmark for Verifiable Process Supervision of Engineering Reasoning

Large Language Models (LLMs) are increasingly entering specialized, safety-critical engineering workflows governed by strict quantitative standards and immutable physical laws, making rigorous evaluation of their reasoning capabilities imperative. However, existing benchmarks such as MMLU, MATH, and HumanEval assess isolated cognitive skills, failing to capture the physically grounded reasoning central to engineering, where scientific principles, quantitative modeling, and practical constraints must converge. To enable verifiable process supervision in engineering, we introduce EngTrace, a symbolic benchmark built on 90 parameterized templates, each generating unique, contamination-resistant problem instances, spanning three major engineering branches, nine core domains, and 20 distinct areas, yielding 1,350 test cases that stress-test generalization across diverse physical scenarios. Moving beyond outcome matching, we introduce a verifiable two-stage evaluation framework that uses a tiered protocol to validate intermediate reasoning traces alongside final answers through automated procedural checks and a heterogeneous AI Tribunal. Our evaluation of 27 leading LLMs reveals a distinct trade-off between numeric precision and trace fidelity, identifying a complexity cliff where abstract mathematical pre-training fails to translate into the integrative reasoning required for advanced engineering tasks.

24.
arXiv (CS.CV) 2026-06-17

Colab NAS: Obtaining lightweight task-specific convolutional neural networks following Occam's razor

The current trend of applying transfer learning from convolutional neural networks (CNNs) trained on large datasets can be an overkill when the target application is a custom and delimited problem, with enough data to train a network from scratch. On the other hand, the training of custom and lighter CNNs requires expertise, in the from-scratch case, and or high-end resources, as in the case of hardware-aware neural architecture search (HW NAS), limiting access to the technology by non-habitual NN developers. For this reason, we present ColabNAS, an affordable HW NAS technique for producing lightweight task-specific CNNs. Its novel derivative-free search strategy, inspired by Occam's razor, allows to obtain state-of-the-art results on the Visual Wake Word dataset, a standard TinyML benchmark, in just 3.1 GPU hours using free online GPU services such as Google Colaboratory and Kaggle Kernel.

25.
arXiv (CS.CV) 2026-06-17

Reload-Mamba: Hierarchical Anti-Dilution State-Space Modeling for Multi-Class Semantic Segmentation

Mamba-based state space models offer linear-time long-range modeling for high-resolution dense prediction, but sequential state-space propagation can attenuate boundary-sensitive and detail-sensitive responses that are critical in multi-class semantic segmentation. We propose Reload-Mamba, a semantic segmentation framework that addresses this propagation-induced response dilution through three segmentation-specific designs: (i) a boundary-supervised local detail prior that is explicitly trained with ground-truth boundary masks to identify regions requiring response restoration; (ii) a class-uncertainty-aware Reload Gate that incorporates per-pixel class entropy from a pre-reload auxiliary head as an additional gating signal, a formulation that is informative only under multi-class dense prediction; and (iii) a hierarchical multi-level Reload mechanism that applies anti-dilution refinement at three decoder levels and fuses the restored representations top-down. Built upon a ConvNeXt-Tiny encoder with a multi-scale decoder and four-directional Mamba scanning with pixel-wise directional attention, Reload-Mamba achieves 47.9% single-scale (48.9% multi-scale) mIoU on ADE20K and 83.2% single-scale mIoU on Cityscapes. With ResNet-101 + COCO pre-training under the standard DeepLab-style protocol, Reload-Mamba reaches 87.8% mIoU on PASCAL VOC 2012 val. Controlled ablations show that each of the three segmentation-specific designs contributes beyond a direct port of the prior anti-dilution architecture proposed for binarization, cumulatively improving over the direct-port baseline by +2.2 mIoU on ADE20K.