Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.LG) 2026-06-24

Forget Without Compromise: Nexus Sampling for Streaming KV-Cache Eviction Under Fixed Budgets

arXiv:2606.23961v1 Announce Type: new Abstract: Long-context and agentic LLM workloads push the KV cache past any fixed memory budget, forcing the inference stack to permanently evict tokens at every step of a continuous-inference stream. Existing methods all share the same template, a per-step direct-attention score followed by deterministic top-$K$ selection, which converts a single below-cutoff step into an irreversible verdict and permanently erases any subtly important token that direct attention cannot single out from noise. To address this challenge, we propose Nexus Sampling, a training-free eviction method that pairs Nexus scoring, an iterative walk over direct attention that surfaces bridge tokens, with weighted reservoir sampling, which retains tokens with inclusion probability in place of deterministic top-$K$. Theoretically, we show that Nexus Sampling dominates deterministic top-$K$ in long-run survival of subtly important tokens. Empirically, at 80% KV cache eviction, Nexus Sampling matches dense attention within 1% on LongBench while outperforming top-$K$ baselines on retrieval-heavy tasks, with up to 10x smaller per-sequence cache memory.

02.
arXiv (quant-ph) 2026-06-11

Scaling-optimal purification of noisy qubit unitary channels

arXiv:2606.12394v1 Announce Type: new Abstract: We consider the problem of purifying noisy qubit unitary channels. Given the ability to apply an unknown qubit unitary channel followed by depolarizing noise, we aim to construct a superchannel that purifies the noisy unitary back to the original unknown unitary. We first provide numerical evidence that sequential strategies can strictly outperform parallel strategies when the number of channel uses is finite, highlighting the fundamental distinction from state purification. We then provide a concrete $\mathrm{U}(2)$-covariant parallel protocol based on a novel entanglement-assisted quantum error-correcting code that suppresses the first-order noise strength as $O(1/n)$ with $n$ channel uses and show this scaling is asymptotically optimal in the low-noise regime, even when sequential strategies are allowed.

03.
arXiv (CS.CV) 2026-06-17

MeiBRD: Meta-Learning Intraoperative Biomechanical Residual Deformation

Accurate intraoperative liver registration is challenging due to substantial soft-tissue deformation yet sparse intraoperative measurements. Biomechanical models regularize this ill-posedness with prior knowledge but exhibit persistent prediction bias due to simplifying assumptions, while data-driven learning solutions struggle with data efficiency, generalization, and physical plausibility. We propose a hybrid registration framework that adapts a biomechanical prior using sparse intraoperative correspondences. Rather than learning a full deformation field, we learn a residual deformation function that corrects linear biomechanical predictions, modeled as a graph neural diffusion function with geometry-aware attention over the 3D liver mesh. To enable long-range information transfer of sparse observations, we take a novel perspective of sparse intraoperative measurements as context samples where input-output pairs of the residual deformation function are fully observed, casting the problem into learning-to-learn this residual function from intraoperative context samples with feedforward meta-learners. Experiments on a deformable liver phantom dataset demonstrate improved registration accuracy and generalization compared to rigid, biomechanical, and data-driven baselines, particularly for out-of-distribution geometries and deformations.

04.
arXiv (CS.CV) 2026-06-16

DCP-Prune: Ultra-Low Token Pruning with Distribution Consistency Preservation

Recent vision token pruning methods effectively preserve model performance under moderate token budgets but become unstable under ultra-low token budget. Our analysis shows that as the pruning budget decreases, accuracy degradation is often accompanied by larger feature distribution shifts. Critically, the degree of this distribution shift strongly correlates with performance degradation. To better characterize this phenomenon, we introduce a lightweight distribution consistency metric to estimate the distribution shift between retained and full tokens. Motivated by these observations, we propose a two-stage pruning framework consisting of Anchor-Context Graph Recovery (ACGR) and Text-Aware Token Cluster Selection (TATCS). Specifically, ACGR transfers contextual information before token removal, while TATCS dynamically re-selects representative tokens when severe distribution shift is detected. Extensive experiments demonstrate that our method achieves superior and more stable performance under ultra-low token budget. Notably, it retains 92.1% of the upper-bound average performance on LLaVA-1.5-7B with only 16 visual tokens.

05.
arXiv (CS.AI) 2026-06-19

A Deep Generative Model for Resting-State EEG Synthesis and Transferable Representation Learning

arXiv:2503.02636v5 Announce Type: replace-cross Abstract: Resting-state EEG provides a non-invasive view of spontaneous brain activity, but extracting meaningful patterns is often limited by scarce high-quality data and reliance on manually engineered features. Generative adversarial networks (GANs) can synthesize neural signals and learn transferable representations directly from raw data, a dual capability that remains underexplored in EEG research. Here, we introduce REST-GAN, a GAN-based framework for resting-state EEG that combines adversarial training with an auxiliary self-supervised reconstruction objective to support signal synthesis and unsupervised feature extraction. Although trained only on raw time-domain signals, without explicit frequency-domain or sensor-topographic supervision, the generated time series reproduced key temporal, spectral, and connectivity properties of real EEG. In band-power feature space, generated samples showed high precision and recall across eyes-open and eyes-closed conditions (EO: 0.91/0.67; EC: 0.87/0.65), while group-average spectral coherence matrices showed low mean absolute differences from real data across frequency bands (~0.01-0.03). The representations learned by the model's critic transferred to independent resting-state demographic classification tasks, outperforming models trained directly on raw EEG and showing competitive performance relative to a recent EEG foundation model, while requiring substantially less training data and computational resources. These findings highlight a computationally efficient, architecture-driven strategy in which generative models serve not only as EEG signal generators, but also as unsupervised feature extractors. This approach may support more data-efficient EEG analysis while reducing reliance on manual feature engineering. The implementation code for REST-GAN is available at: https://github.com/Yeganehfrh/REST-GAN.

06.
arXiv (CS.CV) 2026-06-16

Training-free sparse attention based on cumulative energy filtering

Sparse attention accelerates Diffusion Transformers (DiTs) for video generation by computing only the important tokens while skipping the rest. The token selection strategy is key to balancing sparsity and accuracy. We formulate the token filtering process as a dual-goal optimization problem: maximizing sparsity and minimizing accuracy degradation. Existing algorithms cannot fulfill both objectives simultaneously. For example, Top-p only considers the accuracy constraint, while Top-k maintains a fixed computational budget but loosens the accuracy constraint. This paper demonstrates that maintaining a fixed recall rate is sufficient for ensuring accuracy, whereas a fixed threshold is suboptimal for reducing computational cost. Therefore, we propose a dynamic thresholding scheme to improve sparsity while maintaining the same level of accuracy. Furthermore, our algorithm is deeply integrated with Flash Attention (FA), eliminating the need for any additional masking computation overhead. Experimental results on Wan 2.2 validate that, compared to the BLASST algorithm which is also integrated with FA, our dynamic thresholding strategy enhances sparsity from 61.42\% to 82\% with a VBench metric drop of less than 5\%. This results in an approximate 15\% in attention computation and a $1.61\times$ increase in computational efficiency, which is 1.18x higher than that of BLASST.

08.
arXiv (CS.CL) 2026-06-16

Distilling Examples into Task Instructions: Enhanced In-Context Learning for Real-World B2B Conversations

In-context learning (ICL) is the standard method for low-resource classification, yet its efficacy in specialized domains remains largely unexplored. We address the challenge of classifying semantically complex, multi-party B2B conversations, where traditional ICL encounters significant limitations, especially as context length increases due to the concatenation of multiple few-shot examples. We introduce the \texttt{Call Playbook} dataset, featuring five classification tasks derived from real-world B2B conversations targeting core sales concepts. To bridge the gap between performance and practical utility, we propose novel knowledge extraction methods that distill verbose examples into compact, interpretable representations of structured classification criteria and precise task descriptions. Our approach achieves a 99\% reduction in token usage and improves macro-averaged AUC by up to 7\% over traditional ICL. Notably, it remains robust as context grows, unlike advanced token compression baselines which degrade by over 9 F1 points. Importantly, our framework enables direct refinement of classification logic, addressing critical needs for transparency, efficiency, and user interaction in real-world NLP applications.

09.
arXiv (CS.CV) 2026-06-12

SAM-Deep-EIoU: Selective Mask Propagation for Multi-Object Tracking

Multi-object tracking has a heavy-tailed difficulty distribution: most frames are easy for a lightweight base tracker, while a small fraction are intrinsically hard. Video object segmentation (VOS) models can often preserve identity through the hard frames where the base tracker fails, but they are much more expensive in compute and memory. We propose selective mask propagation, a tracking algorithm that dispatches from a base tracker to a VOS model only on windows where an assignment-uncertainty signal fires. The base tracker's output is modified only when the VOS model makes a confident prediction that contradicts the base tracker's identity assignment; weak or inconclusive predictions preserve the base output. The method is training-free, treats both the base tracker and the VOS model as black boxes, and can benefit from replacing the VOS component with a more capable model. On DanceTrack, selective mask propagation improves three different base trackers. On SportsMOT, where identity preservation is central to sports analytics, SAM3-Deep-EIoU with global track association achieves state-of-the-art performance on the benchmark with 86.8 HOTA.

10.
arXiv (CS.AI) 2026-06-16

StyleShield: Exposing the Fragility of AIGC Detectors through Continuous Controllable Style Transfer

arXiv:2605.00924v2 Announce Type: replace-cross Abstract: AI-generated content (AIGC) detectors are increasingly deployed in high-stakes settings such as academic integrity screening, yet their reliability rests on a fundamental paradox: as language models are trained on human-written corpora, the statistical boundary between AI and human writing will inevitably dissolve as models improve. Commercial incentives have further distorted this landscape – detection services and "de-AIification" tools often operate within the same supply chain, replacing evaluation of content quality with judgment of content origin. We present StyleShield, the first flow matching framework for conditional text style transfer, operating directly in continuous token embedding space via a DiT backbone with zero-initialized cross-attention adapters conditioned on frozen Qwen-7B representations. At inference, we adapt the SDEdit paradigm from image synthesis to text embeddings, with a single parameter gamma providing smooth continuous control over the evasion-preservation trade-off. On a multi-domain Chinese benchmark, StyleShield achieves 94.6% evasion against the training detector and >=99% against three unseen detectors, maintaining 0.928 semantic similarity. We further introduce RateAudit, a document-level scheduling algorithm that demonstrates detection-rate verdicts can be set to arbitrary values, directly questioning the reliability of score-based evaluation.

11.
arXiv (CS.CL) 2026-06-25

Cliff Tokens: Identifying Single-Token Failure Triggers in LLM Mathematical Reasoning

Large language models (LLMs) reach high accuracy in mathematical reasoning, but individual traces on the same problem diverge; some arrive at the correct answer while others fail. Prior work analyzes failure at the step, chunk, or sentence level, or at tokens where failure has already occurred. Neither identifies the precise token that triggers the shift toward failure. We introduce the cliff token, a token where the token-wise potential drops significantly under an adaptive threshold that scales with the local token-wise potential, based on a one-sided two-proportion z-test. Across seven models and three mathematical reasoning benchmarks (GSM1K, MATH500, AIME 2025), cliff tokens act as failure triggers; deleting the first cliff token and resampling recovers pass@64 to 1.0, while keeping it limits recovery to between 0.71 and 1.00. We further introduce a cliff taxonomy of deterministic, uncertain, and sampled-off cliffs, defined by greedy choice and token entropy. Each type has distinct probabilistic characteristics, and the taxonomy generalizes across model scales. Finally, we validate the taxonomy via single-token preference optimization at cliff positions (Cliff-DPO). Trained on GSM8K, Cliff-DPO improves accuracy across benchmarks by up to +6.6. Optimizing at uncertain and sampled-off cliffs improves reasoning, while deterministic cliffs do not.

12.
arXiv (CS.CV) 2026-06-16

SceneConductor: 3D Scene Generation from a Single Image with Multi-Agent Orchestration

Generating complete 3D scenes from a single image requires inferring globally consistent geometry, object relationships, and environmental context from inherently ambiguous visual evidence. Despite recent progress in joint layout-and-mesh generation, existing methods often rely on holistic or weakly decomposed pipelines that entangle many factors at once and demand extensive scene-level supervision, limiting their generalization to complex real-world environments. We propose a multi-agent orchestration framework that decomposes single-image 3D scene generation into three structured stages: scene initialization, environment construction, and multi-agent refinement. The initialization stage extracts image-derived object masks, builds object-level 3D representations, and predicts an initial spatial layout to form a coarse 3D scene. The environment-construction stage then leverages this initialization together with point-map geometry to build an environmental scaffold of supporting surfaces, room boundaries, materials, and illumination. Finally, in the refinement stage, a planner agent identifies structural and visual inconsistencies, applies simple corrections directly, and dispatches specialist agents for complex localized revisions that are reintegrated into the global scene. To provide reliable structural initialization while reducing reliance on scene-level annotations, we further introduce a geometry-aware layout predictor supervised by sparse geometric priors derived from point maps. Unlike fully supervised layout generators, the predictor can be trained from segmentation-level data and generalizes robustly to diverse real-world scenes. Extensive experiments on benchmark datasets show that our method consistently outperforms prior approaches in geometric accuracy, spatial consistency, and perceptual realism.

13.
arXiv (CS.AI) 2026-06-25

Proactive Systems in HCI and AI: Concepts, Challenges, and Opportunities

arXiv:2606.25149v1 Announce Type: cross Abstract: The last few years have seen a significant rise in interest in highly autonomous and proactive systems, fueled by advances in AI. Systems that anticipate user needs, take initiative, and act without explicit user input. Such systems span a wide range of applications, from smart lighting that adapts to user activity to assistive robots that plan actions in advance to intelligent thermostats that learn routines and adjust environments proactively. Despite this breadth, the concept of proactivity remains loosely defined and inconsistently applied across research and practice. Current usage of the term often conflates fundamentally different system behaviors. For instance, simple reminders or recommendation systems are frequently labeled as proactive, even though underlying mechanisms and intentions differ significantly. This conceptual ambiguity limits our ability to systematically design, compare, and evaluate proactive systems. Moreover, existing methodologies for design and evaluation are largely rooted in reactive interaction paradigms, failing to address the unique challenges posed by proactive behavior, including timing, appropriateness, user control, transparency, and trust. This multidisciplinary workshop aims to establish a clearer and more rigorous foundation for understanding proactive systems. We bring together researchers and practitioners from Human-Computer Interaction, AI, and related fields to (1) develop a shared conceptualization of proactivity, (2) identify gaps and limitations in current design and evaluation approaches, and (3) co-create human-centered guidelines and research directions for future systems. Through interactive discussions and collaborative activities, the workshop seeks to map key challenges and opportunities, ultimately advancing robust and consistent frameworks for designing and evaluating proactive technologies.

14.
arXiv (CS.LG) 2026-06-15

PepALD: Macrocyclic Peptide Generation via Autoregressive Latent Diffusion

arXiv:2606.14510v1 Announce Type: new Abstract: Macrocyclic peptides are promising therapeutic candidates for intracellular targets, but their design requires simultaneous control over non-natural monomer chemistry, ring topology, membrane permeability, and target binding. Existing SMILES- or HELM-string generative models either operate in long atom-level sequence spaces or treat monomers as symbolic tokens with limited chemical grounding. We introduce PepALD, an Autoregressive Latent Diffusion (ALD) foundation model for de novo macrocyclic peptide generation. The model represents HELM monomers with structured chemical embeddings, generates each residue through context-conditioned diffusion in chemically informed latent space, predicts R-group-aware ring closures during autoregressive generation, and aligns the denoiser to affinity rewards using winner-protected diffusion-adapted preference optimization. In silico experiments demonstrate PepALD's generation quality and reward-optimization performance against representative peptide generation baselines.

15.
arXiv (CS.LG) 2026-06-12

Mixing Makes Markovian Contexts Cheap for Linear Bandits

arXiv:2603.12530v2 Announce Type: replace Abstract: Recent work shows that when contexts are drawn i.i.d., linear contextual bandits can be reduced to single-context linear bandits. This ``contexts are cheap'' perspective is highly advantageous, as it allows for sharper finite-time analyses and leverages mature techniques from the linear bandit literature, such as those for misspecification and adversarial corruption. However, this reduction crucially relies on the independence of contexts and does not extend to settings with temporally correlated (e.g., Markovian) contexts, which arise frequently in practice. Motivated by applications with temporally correlated availability, we extend this perspective to linear bandits with Markovian context processes, where the action set evolves via an exogenous Markov chain. Our main contribution is a reduction that applies under uniform geometric ergodicity. We construct a stationary surrogate action set to solve the problem using a standard linear bandit oracle, employing a delayed-update scheme to control the bias induced by the nonstationary conditional context distributions. We further provide a phased algorithm for unknown stationary distributions that learns the surrogate mapping online. In both settings, we obtain a high-probability worst-case regret bound matching that of the underlying linear bandit oracle in sufficiently fast mixing regimes. We then validate our results on a real-world instance, where we show practical gains over a LinUCB baseline.

16.
bioRxiv (Bioinfo) 2026-06-12

The Geometry of Allostery: A Laplacian Minor Hierarchy for Many-Body Protein Communication

Quantifying how cooperative, many-body relationships drive allostery in protein networks remains a major challenge. To address this, we develop the Laplacian minor hierarchy, a mathematical framework that characterizes the geometric invariants of a protein network. Lower-order minors yield standard metrics including the partition function and effective distances, whereas higher-order minors define novel topological measures: cooperation indices, each bounded between zero and one, that characterize pathway correlations at increasing levels of complexity, the third-order minor determines whether allosteric pathways are correlated or uncorrelated, and the fourth-order minor quantifies how distinct pathways communicate through intermediary residues. We apply this framework to analyze the evolutionary adaptation of the PSD95pdz3 domain from Class I to Class II ligand specificity via mutations G330T and H372A. The cooperation index demonstrates a distinct evolutionary hierarchy: the G330T mutation establishes distributed pathway couplings that the H372A mutation subsequently exploits, whereas H372A alone produces minimal global changes. Furthermore, the fourth-order analysis identifies His317 as a critical intermediary node bridging the class-switching (330-372) and class-bridging (330-400) allosteric pathways. These results demonstrate that allosteric dependencies emerge only when mutations accumulate in specific combinations, with a hierarchical organization of pathways structured around position 330 and intermediary nodes His317 and Phe400. Rather than predicting allosteric mechanisms, this framework provides a mechanistic explanation for why and how allostery emerges during protein evolution.

17.
arXiv (math.PR) 2026-06-12

Interference Queueing Networks: A Replica Mean-Field Approach in the Symmetric Setting

arXiv:2606.13264v1 Announce Type: new Abstract: We propose a model for evaluating the performance of wireless communication networks beyond the ubiquitous full-buffer assumption, under which every transmitter is always active. The network is represented by N interacting queues arranged on a torus, with homogeneous arrival rate and service rates depending on the activity of neighboring interferers. More precisely, each queue is associated with a transmitter-receiver pair, and its service rate is given by the Shannon capacity, which depends on the corresponding Signal-to-Interference-plus-Noise Ratio (SINR). Since interfering transmitters only emit when their queue is non-empty, the SINR and hence the service rate improves when neighboring queues are empty. We derive the stability region of the system, together with approximations of its stationary distribution and its exponential rate of convergence to stationarity. These approximations are obtained via a replica mean-field limit, for which we establish propagation of chaos and long-time behavior results.

18.
arXiv (CS.CV) 2026-06-11

Damage-TriageFormer: A Foundation-Model Framework for Typology-Based Building Damage Assessment from Mono-Temporal Imagery

Decision-relevant building damage assessment is critical for prioritizing resources and recovery after a disaster, yet most automated methods either flatten damage into a single severity scale (no damage, minor, major, destroyed) or require paired pre- and post-event imagery that is often unavailable for emerging hazards. This paper presents Damage-TriageFormer, a single-image, post-event, footprint-conditioned model that produces a damage typology rather than a severity scale. We contribute: (1) DamageTriage-Bench, a new benchmark built from NOAA Emergency Response Imagery across Hurricane Michael (2018), Hurricane Helene (2024), and the 2025 Los Angeles wildfire complex, with five typology classes that distinguish roof damage from structural damage and, within each, partial from total extent; and (2) Damage-TriageFormer, which extends a DINOv3 ViT-L backbone with a Simple Feature Pyramid for higher-resolution instance pooling, a two-stage gated damage head, and an auxiliary severity-regression objective. Our model achieves macro F1 of 0.624 on validation and 0.619 on a held-out stratified test set, performing strongest where operational triage needs it most, with per-class F1 of 0.91 and 0.84 on undamaged buildings and total structural collapse, respectively. While the rare Total Roof Damage class remains difficult due to its limited examples and an inherently ambiguous label boundary, our results show that single-image post-event imagery can support actionable building damage typing, enabling targeted emergency response and resource allocation without a pre-event reference.

19.
arXiv (CS.CV) 2026-06-19

Through the PRISM: Preference Representation in Intermediate States of Video Diffusion Models

Evaluating video generation with clean, pixel-based reward models disconnects evaluation from the noisy diffusion process and incurs massive VAE decoding costs. In this paper, we challenge this paradigm by asking a fundamental question: Can a powerful video generator inherently discriminate preferences directly from noisy latents? To answer this, we introduce PRISM (Preference Representation in Intermediate States of Diffusion Models). PRISM employs a lightweight Query-based Aggregation head with a frozen video diffusion backbone to decode preference signals from noisy latents. Surprisingly, PRISM not only achieves SOTA preference accuracy but also unlocks strong noise-robustness, which enables early-stage Best-of-$N$ sampling. This allows for filtering suboptimal candidates at the very beginning of denoising, drastically reducing computation while boosting video quality. We also reveal a strong positive correlation between a backbone's generative performance and its inherent evaluative power, enabling self-improving video backbones.

20.
arXiv (CS.CV) 2026-06-12

JointEdit3D: Feed-Forward 3D Scene Editing in a Unified Latent Space

Existing 3D scene editing methods typically rely on per-scene optimization over explicit 3D representations or cascaded edit-and-reconstruct pipelines, resulting in high test-time cost, limited 3D awareness, and structural inconsistencies. To couple appearance synthesis and geometry prediction during editing, we build on a unified RGB-geometry reconstruction-generation latent space and adapt it to feed-forward 3D scene editing. The resulting framework, JointEdit3D, performs asymmetric latent inpainting by observing only a single edited RGB reference latent and generating the remaining RGB views and edited geometry latent under source-scene anchoring. JointEdit3D introduces a dedicated SceneAnchor Branch to inject source-scene structure without forcing direct copying, and adopts edit/background-aware losses to balance edited-region fidelity with unedited-content preservation. To address the lack of paired resources for standardized 3D scene editing evaluation, we introduce SceneEdit3D-15K, a dataset with 15K paired editing samples and renderer-provided 3D annotations, together with SceneEdit3D-Bench, a curated 100-sample benchmark. Experiments show that JointEdit3D improves edited-region quality and 3D structural completeness over prior baselines while maintaining competitive background preservation.

21.
arXiv (CS.CV) 2026-06-24

Machine Learning Modeling for Real-Time Melt Pool Monitoring in Laser Powder Bed Fusion Additive Manufacturing: A Hybrid Approach

This work investigates the implementation of artificial intelligence and machine learning (AI/ML) for real-time monitoring in laser powder bed fusion (LPBF) additive manufacturing. We developed a binary image classification framework for distinguishing normal and abnormal melt pool images using a balanced dataset of 1,200 images collected from Nickel superalloy 625 on the NIST AMMT platform. The study evaluates accuracy and inference time based on control requirements and hardware limitations of open-architecture LPBF machines. We benchmark three transfer learning architectures (ResNet50, EfficientNetB0, and MobileNetV2) against two Random Forest approaches: one trained on EfficientNetB0 feature embeddings (hybrid) and one trained on raw pixel features (baseline). Images are stratified into 80/20 train-test splits, with a further 90/10 validation split on the training set, and undergo standardized resizing, normalization, and label-preserving data augmentation to emulate realistic process variability. Each model is evaluated using accuracy, precision, recall, F1 score, and area under the receiver operating characteristic curve (AUC), along with training time, inference latency, and CPU & GPU usage to capture deployability constraints relevant to factory-floor monitoring. The hybrid EfficientNetB0-plus-Random Forest approach achieves the best performance on the held-out test set, with an F1 score of 0.9451, accuracy of 0.9458, and AUC of 0.9904, while maintaining sub-millisecond per-image inference (1.15 ms). In contrast, purely deep learning models exhibit significantly higher inference times with lower accuracy. These results demonstrate that combining pre-trained convolutional features with classical ensemble methods provides a robust, computationally efficient route to real-time melt pool anomaly detection in data-limited additive manufacturing environments.

22.
arXiv (CS.LG) 2026-06-16

A Fully First-Order Layer for Differentiable Optimization

arXiv:2512.02494v2 Announce Type: replace Abstract: Differentiable optimization layers enable learning systems to make decisions by solving embedded optimization problems. However, computing gradients via implicit differentiation requires solving a linear system with Hessian terms, which is both compute- and memory-intensive. To address this challenge, we propose a novel algorithm that computes the gradient using only first-order information. The key insight is to rewrite the differentiable optimization as a bilevel optimization problem and leverage recent advances in bilevel methods. Specifically, we introduce an active-set Lagrangian hypergradient oracle that avoids Hessian evaluations and provides finite-time, non-asymptotic approximation guarantees. We show that an approximate hypergradient can be computed using only first-order information in $\tilde{O}(1)$ time, leading to an overall complexity of $\tilde{O}(\delta^{-1}\epsilon^{-3})$ for constrained bilevel optimization, which matches the best known rate for non-smooth non-convex optimization. Furthermore, we release an open-source Python library that can be easily adapted from existing solvers. The source code is available at https://github.com/guaguakai/FFOLayer.

23.
arXiv (CS.CV) 2026-06-17

Looped World Models

Current world models face a fundamental tension: faithful long-horizon simulation demands deep computation, but deeper models are expensive to deploy and prone to compounding errors. We resolve this by introducing Looped World Models (LoopWM), which are the first looped architectures for world modelling. Our method iteratively refines latent environment states through a parameter-shared transformer block. This yield up to 100x parameter efficiency over conventional approaches with adaptive computation that automatically scales depth to match the complexity of each prediction step. Orthogonal to scaling model size and training data, LoopWM establishes iterative latent depth as a new scaling axis for world simulation, which might significantly push the community forward.

24.
arXiv (CS.AI) 2026-06-19

How Transparent is DiffusionGemma?

arXiv:2606.20560v1 Announce Type: cross Abstract: LLM reasoning transparency is a critical affordance for understanding model decisions, mitigating misuse and misalignment, and debugging surprising model behaviors. However, DiffusionGemma performs a larger fraction of its computation in a continuous latent space; does this make its reasoning less transparent? We study this question by decomposing transparency into two components: variable transparency, whether we understand intermediate snapshots of a model's computational state; and algorithmic transparency, whether we can use these snapshots to reconstruct the process by which the model arrived at its outputs. Naively, DiffusionGemma has poor variable transparency: its opaque serial depth, the amount of serial computation that occurs in between interpretable model states, seems at first 28.6X higher than the corresponding autoregressive Gemma 4 model. However, we show that we can map the information flowing between denoising steps through an interpretable token bottleneck with no decrease in downstream performance. Treating these intermediate states as interpretable reduces the opaque serial depth to just 1.1X that of Gemma 4. Algorithmic transparency is harder for diffusion models than for autoregressive models because all token predictions in the canvas can change at every denoising step, giving the model the power to implement complicated distributed algorithms during the denoising process. To begin bridging this gap, we conduct a suite of interpretability case studies, uncovering initial evidence of novel diffusion-specific phenomena such as non-chronological reasoning, token and sequence smearing, and intermediate-context reasoning. Finally, we test monitorability, a key application of transparency that measures whether model outputs are useful for downstream tasks. We find that DiffusionGemma is similarly monitorable to Gemma 4.

25.
arXiv (CS.CV) 2026-06-25

A welding penetration prediction model for laser welding process based on self-supervised learning using physics-informed neural networks

The laser welding full-penetration is of critical importance, as it constitutes one of the fundamental factors in achieving defect-free welded joints. Accurate prediction of the penetration state is therefore essential for ensuring weld quality. To this end, this paper introduces SimPhysNet, a novel algorithm that achieves high classification accuracy in laser welding penetration prediction using only a limited number of labelled images. This approach effectively overcomes the limitations of supervised learning classification algorithms, which are hindered in industrial applications by their dependence on extensive, high-quality labelled data. The core of SimPhysNet is a unique self-supervised learning paradigm that embeds physical priors into a contrastive learning framework. By incorporating a physics-informed neural network (PINN), the model is guided to extract physically meaningful features of the molten pool and keyhole from a large set of unlabelled data, while three image augmentation tasks further enhance its generalization capabilities. Subsequently, a few-shot learning strategy, based on prototypical networks, enables robust classification by constructing class representations from a minimal set of labelled images. Experimental results demonstrate that SimPhysNet achieves a classification accuracy of 96.06% using only 200 labelled images (approximately 5% of the total labelled dataset), which is comparable to the performance of conventional supervised learning algorithms that utilize the entire labelled dataset. This work presents a new, efficient, and highly accurate method, providing the way for the intelligent automation of laser welding.