Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-16

SDS-LoRA: Overcoming Anisotropic Gradient Scaling in Low-Rank Adaptation

arXiv:2606.16454v1 Announce Type: cross Abstract: Low-Rank Adaptation (LoRA) enables efficient adaptation of large pre-trained models to downstream tasks by parameterizing weight updates with low-rank matrices. In this paper, we investigate the limitations of the LoRA parameterization from a geometric perspective. Specifically, we show that when a full fine-tuning gradient is backpropagated to the low-rank matrices, it undergoes anisotropic scaling driven by their singular values. We argue that this phenomenon is undesirable because it distorts the full fine-tuning gradient by skewing it toward dominant singular directions while suppressing others. Our analyses demonstrate that anisotropic gradient scaling reduces the effective rank of the low-rank matrices' gradients and results in suboptimal alignment between the full fine-tuning gradient and its low-rank approximation in LoRA, thereby exacerbating the gap to full fine-tuning. To address these limitations, we propose a new low-rank parameterization, SDS-LoRA, which structurally decouples singular values from the backward pass. Our method ensures that the full fine-tuning gradient backpropagates only through the orthonormal bases of the low-rank matrices' subspaces, independent of their scales. Convergence analysis demonstrates that while LoRA's convergence rate degrades with the condition number of the low-rank matrices, SDS-LoRA remains independent of it. Experimental results across natural language and vision benchmarks show that SDS-LoRA improves loss convergence and reduces the gap to full fine-tuning, significantly enhancing adaptation performance.

02.
arXiv (quant-ph) 2026-06-11

Fabricating fiber cavity mirror substrates compatible with high coupling efficiency

arXiv:2606.12168v1 Announce Type: cross Abstract: Fiber optical cavities offer small mode volumes and correspondingly strong light-matter interactions in an open Fabry-Perot geometry. However, existing fabrication techniques do not reliably produce substrates with surface profiles amenable to high mode matching between the cavity mode and fiber core, thereby limiting the achievable collection efficiency. Here we present a technique to fabricate fiber mirror substrates while using $in situ$ reflectometry to constrain the achievable mode matching prior to coating. By measuring the back-reflection from freshly cleaved fiber tips, we pre-select 138 fibers compatible with 96.5-99.5% mode matching, and after a single CO$_2$ laser ablation pulse, these fibers remained compatible with 95.3-99.2\%. This simple technique provides rapid feedback during each stage of substrate fabrication, greatly enhancing the yield of viable fiber mirror substrates prior to (expensive) coating runs.

03.
arXiv (quant-ph) 2026-06-15

Optimal Decoding of Small Codes by Density Matrix Propagation

arXiv:2606.14455v1 Announce Type: new Abstract: Accurate and efficient decoding is a crucial component for achieving fault-tolerant quantum computing. Realistic circuit-level noise introduces temporal correlations and degeneracy, making optimal (maximum-likelihood) decoding computationally intractable in general. As a result, practical decoders rely on heuristic approximations, and it is generally difficult to quantify how suboptimal they are, as this strongly depends on the code and noise model considered. In this work, we study the accuracy of practical decoding algorithms under circuit-level noise by comparing them against a maximum likelihood decoding benchmark. Our approach propagates the density matrix through the full memory experiment and computes the optimal decoding decision for each syndrome history. We introduce pruning techniques with rigorous bounds, allowing us to access larger numbers of syndrome-extraction rounds. We apply this framework to small instances of the repetition code and a cellular automaton code, and benchmark minimum-weight perfect matching (MWPM), belief propagation with ordered statistics decoding (BP+OSD), Tesseract, and Planar decoders against optimal decoding. While standard decoders remain close to optimal for the repetition code, we find significant deviations for the cellular automaton code, with BP+OSD deteriorating already in experimentally relevant noise regimes. Moreover, the pruning method developed here highlights that, at low physical error rates, only a narrow fraction of syndrome histories contributes significantly to the logical error rate.

04.
arXiv (CS.LG) 2026-06-24

Managing Task Execution for Unknown Workloads in Batteryless IoT: A Hardware-Agnostic Evaluation

arXiv:2606.24340v1 Announce Type: new Abstract: In recent years, the Internet of Things (IoT) paradigm has been shifting toward batteryless, energy-harvesting architectures. Sustaining reliable operation in these systems requires intelligent management of highly volatile stored energy. As edge applications grow in complexity, traditional energy-aware schedulers struggle with unpredictable workloads due to their reliance on static execution thresholds or pre-measured, hardware-specific task profiles. To overcome this, we propose two novel, hardware-agnostic dynamic scheduling strategies treating applications as a "black box," requiring no prior energy information: a model-free Reinforcement Learning (RL) agent and an on-the-fly Approximated Prediction (AP) method. We evaluate these methods against an adaptive task rate approach (AsTAR) and optimized static thresholds using a custom-built, physically accurate simulation framework driven by real-world solar data and dynamic LoRa transmission profiles. Rather than claiming universal superiority, our analysis exposes the distinct operational trade-offs of each method: the AP approach delivers lightweight, near-oracle task throughput; the RL agent provides tunable survival-execution balancing; and AsTAR excels at execution pacing across long energy gaps. Finally, we demonstrate that while these advanced strategies provide critical resilience for severely constrained systems with small capacitors, devices with larger energy buffers can efficiently rely on simpler, less computationally expensive static policies.

05.
arXiv (CS.AI) 2026-06-17

LLM-as-Judge in Education: A Curriculum-Grounded Marking Pipeline

arXiv:2606.17507v1 Announce Type: new Abstract: Generative AI and large language models (LLMs) are increasingly applied to question generation and automated assessment. However, deploying LLMs in preparation for high-stakes exams requires more than prompt engineering; it demands software pipelines that systematically ground model outputs in authorised curriculum artefacts and marking guidelines issued by education authorities. This paper presents a curriculum-grounded, configurable LLM-as-Judge pipeline for question-level marking, co-developed with an industrial partner, to support exam preparation for university admission. The pipeline identifies the relevant topics, subtopics, and cognitive demand of a question, and assembles verifiable and authorised context to support LLM judgement. Curriculum intent is operationalised through concrete syllabus artefacts, including prescribed verbs and outcomes, performance band descriptors, glossary definitions, and marking-guideline principles. A staged LLM workflow is employed to first generate question-specific rubrics, capturing structured expectations of performance, and then derive and evaluate marking criteria used to allocate marks to student responses. This design improves consistency, transparency, and alignment with official marking practices. Preliminary evaluation shows that the proposed LLM-as-Judge pipeline delivers marking outcomes comparable to human tutors, while yielding justifications that are more traceable to authorised curriculum artefacts and marking standards. The pipeline has also been integrated into an online study platform, where early deployment data provide initial insights into operational usage and manual overrides.

06.
arXiv (CS.AI) 2026-06-16

Leveraging Deep Learning for Object and Position Recognition of Load Carriers for Autonomous Logistics Vehicles

arXiv:2606.16042v1 Announce Type: cross Abstract: This work explores the use of artificial intelligence in mobile robotics to achieve autonomous detection and pose estimation of load carriers for automated pickup. A deep neural network is designed to recognize predefined landmarks on the carrier from RGBD data; these landmarks are then used to compute the carrier's pose. The network operates directly on RGBD images to estimate landmark positions, which form the basis for determining the carrier's location. The approach is validated in extensive experiments and comprises both software and hardware implementations. A deep learning-based framework is presented to detect load carriers and estimate their pose for use with autonomous logistics vehicles. Our method uses a convolutional neural network to identify characteristic reference points on the carrier from RGBD input and computes its pose by combining these inferred landmarks with prior geometric knowledge. Experiments show that the resulting accuracy is sufficient for reliable load carrier detection in industrial environments, confirming the suitability of the method for autonomous intralogistics applications.

07.
arXiv (CS.AI) 2026-06-16

Where Did It Go Wrong? Process-Level Evaluation of Web Agents with Semantic State Tracking

arXiv:2606.15673v1 Announce Type: new Abstract: Web agents act through long interaction sequences, yet existing benchmarks evaluate only terminal success, discarding all process information and offering little guidance on improvement. In this work, we conduct a process-level analysis of web agents. We introduce WebStep, a benchmark of 1,800 task instances with controlled difficulty and automatic semantic state tracking. Each website exposes a deterministic semantic MDP alongside the GUI: the agent operates on the interface, while the environment records high-level states and transitions in the background, enabling fine-grained analysis without manual annotation. Based on the semantic trajectory, we first show that process metrics reveal differences invisible to outcome evaluation: three agents whose success rates cluster within 31-33% diverge in exploration reach versus execution accuracy. Then, decomposing by skill characterizes the nature of these differences, exposing opposite per-skill rankings hidden within the same website: e.g., on Housing, OpenAI CUA outperforms Qwen3.5 by 23.7% on commit actions yet underperforms it by 15.6% on filtering, pinpointing a concrete skill to improve even within a domain. Bifurcation analysis further localizes the decisive error that loses the task and shows that this error is agent-specific rather than shared. Finally, these differences widen as tasks grow harder: success rate is similar on easy tasks but separates sharply as exploration becomes more demanding. Our process-level analysis opens a new avenue in web agent evaluation, providing fine-grained and actionable insight into where and how each agent should be improved.

08.
arXiv (CS.CL) 2026-06-18

TW-LegalBench: Measuring Taiwanese Legal Understanding

Large language models (LLMs) have shown impressive capabilities across diverse tasks, yet their performance on jurisdiction-specific legal reasoning remains underexplored. We present TW-LegalBench that utilizes Taiwanese legal system's rich official corpus open to the public to fill the gap in evaluating LLMs on Taiwanese law, among common-law benchmarks that focus on English sources and civil-law benchmarks focusing on sources of Simplified Chinese. TW-LegalBench comprises three task types: (1) over 16,000 multiple-choice questions (MCQs) across five years of official examinations in 18 professional domains; (2) 117 open-ended essay questions (OEQs) from examinations for legal professionals with official scoring rubrics; and (3) more than 14,000 legal judgment prediction (LJP) instances covering hundreds of crime categories. We evaluate 13 LLMs using accuracy for MCQs, a decomposed LLM-as-Judge framework based on the scoring rubric points for OEQs, and metrics for sentencing accuracy and statute citation for LJP. Our results reveal that top-performing models exceed the passing threshold for qualified lawyers (passing rate: 11%) but fall short of that for judges and prosecutors (passing rate: 1~2%). For LJP, while models demonstrate reasonable verdict type accuracy and sentence prediction capability, they struggle to cite exact legal articles. These findings highlight that reliable legal text generation remains challenging for LLMs, even though their performance on qualification examinations approaches human level.

09.
arXiv (CS.CV) 2026-06-15

SMART: Scalable Mesh-free Aerodynamic Simulations from Raw Geometries using a Transformer-based Surrogate Model

Machine learning-based surrogate models have emerged as more efficient alternatives to numerical solvers for physical simulations over complex geometries, such as car bodies. Many existing models incorporate the simulation mesh as an additional input, thereby reducing prediction errors. However, generating a simulation mesh for new geometries is computationally costly. In contrast, mesh-free methods, which do not rely on the simulation mesh, typically incur higher errors. Motivated by these considerations, we introduce SMART, a neural surrogate model that predicts physical quantities at arbitrary query locations using only a point-cloud representation of the geometry, without requiring access to the simulation mesh. The geometry and simulation parameters are encoded into a shared latent space that captures both structural and parametric characteristics of the physical field. A physics decoder then attends to the encoder's intermediate latent representations to map spatial queries to physical quantities. Through this cross-layer interaction, the model jointly updates latent geometric features and the evolving physical field. Extensive experiments show that SMART is competitive with and often outperforms existing methods that rely on the simulation mesh as input, demonstrating its capabilities for industry-level simulations.

10.
arXiv (CS.AI) 2026-06-18

Data Intelligence Agents: Interpreting, Modeling, and Querying Enterprise Data via Autonomous Coding Agents

arXiv:2606.19319v1 Announce Type: cross Abstract: Production data integration is bottlenecked by repeated, lossy handoffs between data owners, engineers, and analysts who must collaboratively discover, structure, and query enterprise data. We present Data Intelligence Agents (DIA), a system of three agents (Data Interpreter, Schema Creator, and Query Generator) that compresses this workflow by treating autonomous coding agents (ACAs) as a first-class abstraction: rather than emitting text, the agents generate, execute, validate, and repair concrete artifacts, draw on a shared memory for experience reuse, and surface each for review by domain experts. DIA is deployed in production for enterprise customers. We study the Query Generator in depth and evaluate it in fully autonomous mode across seven SQL benchmarks spanning four task categories and four dialects. It matches or surpasses the best published results on all seven, demonstrating that an architecture grounded in execution, built on ACAs and a shared memory, generalizes across the data intelligence workload with adaptation confined to natural-language instructions.

11.
arXiv (CS.LG) 2026-06-18

Exponentially many initializations to avoid barren plateaus

arXiv:2606.18515v1 Announce Type: cross Abstract: Barren plateaus are stated as an average-case phenomenon: pick an ansatz, initialize it naively, and concentration follows. This has led to the common view that a potential cure for barren plateaus is simply to initialize the parameters more carefully. Here we show that the situation is subtler. We introduce a first-moment framework that gives a simple operator-level diagnostic for when an initialization may escape the fully concentrated barren-plateau fixed point, and for comparing the biases induced by different initialization strategies. Our framework recovers several known initialization schemes such as identity and Gaussian initialization, but also shows that barren-plateau avoidance is highly non-unique. Indeed, many shifted, biased, and non-symmetric parameter distributions can avoid concentration, and these choices need not be equivalent. In fact, our results show that one can generate exponentially many families of inequivalent initialization strategies. Then, our numerics indicate that different first-moment-distinct initializations can lead to different attained minima, suggesting that avoiding barren plateaus via smart initializations can trade the exponential concentration problem for the challenge of selecting the right trainable pocket amongst many options.

12.
PLOS Medicine 2026-06-18

Association between initial benzodiazepine prescribing patterns and time to benzodiazepine discontinuation: A population-based retrospective cohort study

by Nikki Bozinoff, Tanya S. Hauck, Robert A. Kleinman, Matthew E. Sloan, Beth A. Sproule, Simone N. Vigod, Jennifer Wyman, Priscila Pequeno, Tara Gomes Background Long-term benzodiazepine use has been associated with increased risk of morbidity and mortality. Preventing long-term use through safer prescribing practices has received little attention to date. We sought to better understand associations between initial prescription characteristics and duration of benzodiazepine use. Methods and findings This was a retrospective population-based cohort study of 1,820,808 adults in Ontario with incident benzodiazepine prescriptions between January 1, 2013 and December 31, 2020, with follow-up to December 31, 2021. The primary exposure was duration of the index prescription (≤7 days—referent group, 8–14 days, 15–30 days, or >30 days). Secondary exposures were: (a) duration of action of index benzodiazepine(s) prescription (short-acting, long-acting or both); (b) number of benzodiazepine dispensed on index (1 or 2+); and (c) mean daily dose of the index prescription in Diazepam Milligram Equivalents (DMEs). The primary outcome was time to benzodiazepine discontinuation in days. Multivariable models were adjusted for age, sex, anxiety, insomnia, and substance use disorders as well as other important comorbidities and socio-demographic characteristics. The median age at index was 53 years (Interquartile Range (IQR) 38–67), and 62.6% were women. The median time to discontinuation in women was 16 days (IQR: 6–29) while the median time to discontinuation in men was 19 days (IQR: 6–29). Lorazepam was the most commonly prescribed benzodiazepine on index (63.9%), followed by clonazepam (17.3%) and diazepam (5.8%). In multivariable Cox Proportional Hazards Models, longer index prescriptions were associated with a lower likelihood of benzodiazepine discontinuation (adjusted Hazard Ratio (aHR) 0.54 (95% Confidence Interval (CI) [0.54,0.54]) for 8–14 days; aHR 0.26 (95% CI [0.25,0.26] for 15–30 days and aHR 0.14 (95% CI [0.14,0.14]) for >30 days, compared to ≤7 days, respectively). Being prescribed two or more benzodiazepines versus 1 was also associated with a reduced likelihood of discontinuation (aHR 0.59 (95% CI [0.57,0.61])), as was being prescribed long-acting benzodiazepines (aHR 0.80 (95% CI [0.80,0.80])) or a combination of short and long acting benzodiazepine (aHR 0.84 (95% CI [0.80,0.88])) versus short-acting benzodiazepines alone. Mean daily doses of >5 to ≤10 DME and >10 to ≤20 DME were associated with an increased likelihood of discontinuation (aHR 1.03 (95% CI [1.03,1.03]); aHR: 1.03 (95% CI [1.03,1.04])), whereas doses >20 DME were associated with a reduced likelihood of discontinuation (aHR 0.98 (95% CI [0.97,0.98])) compared with ≤5 DME. Findings may be subject to bias from unmeasured confounding. Conclusion This large population-based cohort study found that prescribing shorter courses of benzodiazepines, use of a single benzodiazepine, use of a short-acting agent, were associated with reduced likelihood of long-term benzodiazepine use. Findings suggest that simple changes to prescribing practices could reduce prolonged benzodiazepine use and the morbidity and mortality associated with long-term use of these medications.

13.
arXiv (CS.LG) 2026-06-17

Evaluating Open-Source LLMs for Multi-Label ATT&CK Technique Classification on CTI Reports

arXiv:2606.18166v1 Announce Type: cross Abstract: Classifying Cyber Threat Intelligence (CTI) using MITRE Adversarial Tactics, Techniques, and Common Knowledge (ATT&CK) is essential for proactive defense, but historically required extensive human effort. Pre-Large Language Model (LLM) automation sped up this process, but could not resolve the complex language and multi-step attack patterns found in unstructured CTI reports. LLMs addressed previous limitations by using contextual reasoning to understand unstructured text. However, current evaluations rely on simplified, single-technique sentences that ignore the complexity of real-world CTI reports, which often leads to inflated performance results. Consequently, the baseline performance of open-source LLMs on complex unstructured CTI reports remains unevaluated. To address this gap, we constructed a ground-truth dataset of 2,076 human-annotated sentences (1,281 technique-positive, 795 negative) from 83 complex unstructured CTI reports. These sentences were mapped to 114 unique ATT&CK techniques using a six-phase annotation process, achieving \k{appa} = 0.68 inter-annotator agreement. Using this dataset, we evaluated seven open-source LLMs ranging from 8B to 236B parameters across prompt strategy and temperature configurations. The highest-performing LLM achieved a micro-averaged F1 score of 0.22, establishing the empirical baseline for multi-label ATT&CK classification on complex unstructured CTI. Parameter size showed a statistically significant positive correlation with F1 score. Prompt strategy and temperature produced no statistically significant gains across model configurations. These results indicate that current open-source LLMs are insufficient for production-grade ATT&CK classification. The dataset, benchmark, and findings provide a reproducible foundation for future CTI research.

14.
arXiv (CS.CL) 2026-06-19

AtomMem: Building Simple and Effective Memory System for LLM Agents via Atomic Facts

Large language models (LLMs) demonstrate strong reasoning and generation abilities, but their fixed context windows limit long-term information accumulation and reuse across multi-session interactions. Existing memory-augmented systems often construct memory in a coarse and unstable manner, relying on inefficient memory representations or unstable unconstrained updates. To address these challenges, we propose AtomMem, a long-term memory system designed for value-dense storage and stable memory evolution. AtomMem introduces a Fact Executor, which selectively extracts high value atomic facts from long form interactions to serve as highly efficient memory representations. Subsequently, AtomMem organizes these facts into hierarchical event structures and temporal profiles, capturing coherent episodic contexts and tracking dynamically evolving user attributes over time. During retrieval, the system activates an associative memory graph to connect fragmented memories. Experiments on the LoCoMo benchmark confirm that AtomMem achieves state-of-the-art performance across various reasoning tasks, offering a scalable and economically viable solution for deploying intelligent personalized agents.

15.
arXiv (CS.CL) 2026-06-17

Correct When Paired, Wrong When Split: Decoupling and Editing Modality-Specific Neurons in MLLMs

Although Knowledge Editing provides an efficient mechanism for updating the knowledge of Multimodal Large Language Models (MLLMs), we find that current paradigms still suffer from an important yet remain underexplored issue : editing decoupling failure, where entity-related knowledge can be updated when the model is triggered by multimodal inputs (text–image query pairs), however, it often reverts to outdated pre-edit facts when the paired inputs are split into unimodal ones. Our in-depth empirical analysis reveals that the entity knowledge in MLLMs is not stored as a unified representation, but is instead distributed across disentangled modality-specific pathways. As a result, updates biased toward multimodal queries fail to propagate effectively to unimodal circuits. To bridge this gap, we propose DECODE, which explicitly disentangles and localizes modality-specific neuron groups for targeted knowledge. Extensive experiments demonstrate that DECODE consistently achieves effective knowledge updates under different modality triggers, thereby mitigating editing decoupling failures.

16.
arXiv (CS.AI) 2026-06-18

Mechanism-Guided Selective Unlearning for RLVR-Induced Reasoning

arXiv:2606.19222v1 Announce Type: cross Abstract: We propose MAST (Mechanism-Aligned Selective Targeting), a mechanism-guided method for unlearning RLVR-induced reasoning with substantially lower collateral damage than standard full-parameter updates. In matched SFT/RLVR checkpoints on Qwen2.5-Math-1.5B and Qwen3-1.7B-Base, the SFT-to-RLVR increment differs sharply from the SFT update in token-level delta-log-probability, and full-parameter gradient ascent forgets only by damaging retain MATH and GSM8K. MAST ranks attention-projection tensors by off-principal energy, update magnitude, and forget-gradient coupling magnitude, then updates only the top-ranked subset. On the primary model, MAST induces statistically significant target forgetting (MATH forget 45/150 to 37/150; McNemar p=0.0078) while preserving GSM8K (+0.8 pp) and MATH retain (-0.5 pp). The advantage reproduces across seeds, NPO/SimNPO objectives, and Qwen3, where MAST preserves GSM8K while full-parameter unlearning collapses it.

17.
arXiv (CS.CV) 2026-06-19

Pixel-Level Residual Diffusion Transformer: Scalable 3D CT Volume Generation

Generating high-resolution 3D CT volumes with fine details remains challenging due to substantial computational demands and optimization difficulties inherent to existing generative models. In this paper, we propose the Pixel-Level Residual Diffusion Transformer (PRDiT), a scalable generative framework that synthesizes high-quality 3D medical volumes directly at voxel-level. PRDiT introduces a two-stage training architecture comprising 1) a local denoiser in the form of an MLP-based blind estimator operating on overlapping 3D patches to separate low-frequency structures efficiently, and 2) a global residual diffusion transformer employing memory-efficient attention to model and refine high-frequency residuals across entire volumes. This coarse-to-fine modeling strategy simplifies optimization, enhances training stability, and effectively preserves subtle structures without the limitations of an autoencoder bottleneck. Extensive experiments conducted on the LIDC-IDRI and RAD-ChestCT datasets demonstrate that PRDiT consistently outperforms state-of-the-art models, such as HA-GAN, 3D LDM and WDM-3D, achieving significantly lower 3D FID, MMD and Wasserstein distance scores.

18.
arXiv (math.PR) 2026-06-11

On Skorokhod Problems for Reflected and Singular Stochastic Heat Equations

arXiv:2606.11951v1 Announce Type: new Abstract: We prove a Skorokhod decomposition for the Markov processes $X^a$ and $X$ associated to the gradient Dirichlet forms with respect to the measures $\rho^a\mu^{\beta}$ and $\rho\mu^{\beta}$, respectively. Here, $\mu^{\beta}$ is the law of the standard Brownian bridge $\beta$, while $\rho^a$ and $\rho$ denote densities which are given by $\rho^a(z) := \mathbf{1}_{[0,\infty)}(\bar{z}_a)$ and $\rho(z) := \int_0^1 \mathbf{1}_{[0,\infty)}(\bar{z}_x) \, dx$, respectively, for all $z\in L^2(0,1)$ which have a (unique) continuous representative $\bar{z}$ which vanishes at zero and one. To this end, we derive infinite-dimensional integration by parts formulas (IbPFs) w.r.t. $\rho^a\mu^{\beta}$ and $\rho\mu^{\beta}$, which contain Hida distributions alongside the usual drift terms. We represent these Hida distributions by integration w.r.t. vector measures of bounded variation. The vector measures in question are constructed via an approximation argument, making use of a generalization of Prokhorov's theorem for vector measures. We further prove that, almost surely, the sample paths of $X^a$ and $X$ take values in the equivalence class of continuous functions vanishing at zero and one for all and $dt$-almost all times, respectively. The main motivation for studying $\rho^a\mu^{\beta}$ and $\rho\mu^{\beta}$ lies in the fact that the distributional terms in their IbPFs are simplifications of the distributional term in the IbPF w.r.t. the law of the reflected Brownian bridge on the unit interval $\mu^{|\beta|}$. Representing the latter by integration w.r.t. a vector measure of bounded variation is still an open problem.

19.
arXiv (CS.CV) 2026-06-16

MeshLoom: Feed-Forward Non-Rigid Registration of Mesh Sequences

We present MeshLoom, a feed-forward registration network that directly reconstructs vertex deformations across mesh sequences. Our approach advances non-rigid registration beyond existing models, which are typically constrained by costly per-instance optimization, narrow object categories, pairwise-only inputs, or merely intermediate outputs. The network is simple and efficient, registering multiple meshes within seconds. At its core lies a topology-aware encoder–decoder design. Specifically, we first introduce a topology-aware point representation that encodes the anchor (reference) mesh's topology into its per-vertex features. This representation strengthens the network's understanding of the anchor-mesh geometry and disambiguates points that are Euclidean-close yet geodesically distant. We then propose a multi-modal encoder that fuses this anchor-mesh representation with complementary cues from each frame, such as shape latents and image features. These multi-source signals are compressed into a compact global motion embedding that captures dense inter-frame correspondence. A lightweight decoder then queries this global embedding with the anchor-mesh point representation, retrieving per-vertex deformations at target timestamps. Through extensive experiments across diverse motions and object categories, we show that MeshLoom achieves state-of-the-art results on non-rigid registration. In addition, we find that our global embedding-then-query paradigm naturally enables the network to generate deformations at intermediate timestamps, which extends MeshLoom to motion interpolation and mesh morphing. Project page: https://meshloom.github.io/ .

20.
arXiv (CS.CL) 2026-06-11

Cross-Layer Discrete Concept Discovery for Interpreting Language Models

Interpreting language models remains challenging due to the existence of residual stream, which linearly mixes and duplicates features across adjacent layers, causing single-layer analyses to miss this cross-layer structure. Cross-layer sparse autoencoders (SAEs) address layer mixing but operate in continuous space, where concepts split across many neurons without clear boundaries. We introduce Cross-Layer Vector Quantized-Variational Autoencoder (CLVQ-VAE), a novel framework which maps representations from a lower layer to a higher layer through a discrete vector-quantization bottleneck, collapsing duplicated residual-stream features into compact, interpretable concept vectors. Our approach combines top-k temperature-based sampling with exponential moving average (EMA) codebook updates, providing controlled exploration of the discrete latent space while maintaining codebook diversity. Across both encoder- and decoder-based models on ERASER-Movie, Jigsaw, and AGNews, CLVQ-VAE outperforms clustering, single-layer vector quantized-variational autoencoder (VQ-VAE), and sparse autoencoder (SAE) baselines across three evaluation axes: removing identified concepts drops model accuracy by up to 93%, LLM judges rank our concepts first in 66.7% of comparisons, and human annotators recover model predictions from our visualizations with 78% accuracy versus 54% for clustering.

22.
bioRxiv (Bioinfo) 2026-06-11

A high-quality chromosome-scale reference genome assembly for Asparagus racemosus var. CIM-Shakti (Shatavari), a medicinal plant of Ayurvedic importance

Asparagus racemosus Wild., commonly known as Shatavari, is an important medicinal plant in Ayurveda and is valued for its steroidal saponins, particularly shatavarin compounds, which contribute to its adaptogenic, galactagogue, immunomodulatory, and therapeutic properties. Despite its medicinal and economic importance, genomic resources for this species have remained limited, restricting molecular breeding, pathway discovery, and comparative evolutionary studies within Asparagaceae. Here, we report a high quality chromosome scale reference genome assembly of A. racemosus var. CIM Shakti generated using PacBio HiFi long read sequencing and Omni C chromatin conformation scaffolding. The pseudo haploid assembly spans 817 Mb across 53 scaffolds, with a scaffold N50 of 98.50 Mb, L50 of 5, and a largest scaffold of 113.80 Mb. Ten major chromosome scale pseudomolecules were resolved, corresponding to the haploid chromosome complement of A. racemosus. The assembly showed high gene space completeness, with BUSCO completeness of 99.8% against the Eukaryota dataset and 98.0% against the Embryophyta dataset. BlobToolKit profiling further supported assembly quality, with GC content of approximately 39 to 40% and no major evidence of contamination. EDTA based repeat annotation identified 580.93 Mb of interspersed repetitive elements, accounting for 71.06% of the 817.57 Mb genome assembly. The repeat landscape was dominated by LTR retrotransposons, particularly Gypsy elements, which accounted for 25.01% of the assembly, followed by unclassified LTR elements at 26.58% and Copia elements at 4.84%. Structural and functional annotation identified 29,199 protein coding genes represented by 29,199 transcript models, 138,433 exons, and 125,201 CDS features. The annotation was structurally robust, with an average gene length of 4,605.1 bp, 4.74 exons per transcript, and 97.80% of transcripts containing multiple exons. The CIM Shakti reference genome provides a foundational genomic resource for investigating steroidal saponin biosynthesis, sex chromosome evolution, repeat driven genome expansion, and comparative genomics in Asparagaceae. This assembly will support future studies on medicinal trait improvement, conservation genomics, and genomics assisted breeding of climate resilient Shatavari cultivars.

23.
arXiv (CS.AI) 2026-06-17

RLRC: Reinforcement Learning-based Recovery for Compressed Vision-Language-Action Models

arXiv:2506.17639v2 Announce Type: replace-cross Abstract: Vision-Language-Action models (VLA) have demonstrated remarkable capabilities and strong potential in complex robotic manipulation. However, their large parameter sizes and high inference latency hinder real-world deployment, especially on resource-constrained platforms. To address this, we conduct a systematic empirical study of model compression for VLAs. Building on these insights, we present RLRC, a three-stage compression and recovery pipeline consisting of structured pruning, performance recovery via SFT and RL, and subsequent quantization. The RL stage incorporates a critic warm-up strategy and BC loss regularization to stabilize training and preserve policy behavior. RLRC achieves up to an 8 times memory reduction and 2.3 times inference speedup while maintaining the original task success rate. Extensive experiments across multiple VLA backbones show that RLRC consistently outperforms existing compression baselines, highlighting its effectiveness for on-device deployment. Project website: https://rlrc-vla.github.io

24.
arXiv (CS.AI) 2026-06-11

JailbreakOPT: Tool-Assisted Iterative Jailbreak Prompt Optimization

arXiv:2606.11425v1 Announce Type: cross Abstract: Jailbreak attacks expose persistent safety weaknesses in large language models (LLMs), but existing stateless single-turn methods face a trade-off: hand-crafted prompts are expressive but static, while iterative prompt optimization can adapt but often relies on low-level mutations that require many target queries. We propose JailbreakOPT, a tool-assisted framework for improving iterative single-turn jailbreak prompt optimization. JailbreakOPT organizes diverse atomic jailbreak prompts into an attack tool library and composes them through a unified intra-episode optimization abstraction to generate stronger standalone attack prompts. To reuse experience across attack episodes, JailbreakOPT further frames tool selection as a contextual bandit problem and applies contextual Thompson sampling to guide exploration and exploitation based on past outcomes. Experiments across multiple target LLMs and attack goals show that JailbreakOPT improves attack success rate (ASR) while reducing the number of attacks until success (No.A) compared with atomic single-turn attacks and existing iterative optimization baselines. This paper may contain offensive or harmful content.

25.
arXiv (quant-ph) 2026-06-17

Hybrid Ferromagnet-SNSPDs: Single photon induced order-to-disorder transition in ferromagnets coupled to thin film superconductors

arXiv:2606.17177v1 Announce Type: cross Abstract: The development of midwave and longwave infrared single photon detectors is crucial for their emerging applications in spectroscopy, remote sensing, exoplanet detection, and free space quantum communications. However, existing sensors need to be operated at extremely low temperatures (0.08-0.9K) to reduce dark noise and hence require the use of advanced cryogenics such as dilution refrigerators or $^3$He cryogens, significantly limiting applications. Here we propose a vortex-engineering approach based on a hybrid phase transition in a ferromagnet/superconductor bilayer to increase the operating temperature of infrared single photon detectors up to 3.75K. We show that the introduction of a ferromagnetic layer produces a local magnetic field which impedes vortex crossing in the superconductor, reducing dark noise. When a single photon is incident, the photon-induced hotspot causes an order-to-disorder transition in the ferromagnet, leading to a vortex-induced phase transition in the superconducting layer. By engineering the ferromagnet's Curie temperature to be close to the device's operating temperature, single photon sensitivity can be achieved at increased operating temperatures. We predict at midwave/longwave infrared wavelengths (3-14$\mu$m) the operating temperature can be raised to 3.25-3.75K, enabling significantly simpler cooling systems.