DeepMind spinout raises $2.1 billion
该条目无摘要(多为勘误、社论或新闻类内容,出版方未提供摘要)
Academic Intelligence · Curated Daily
AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。
该条目无摘要(多为勘误、社论或新闻类内容,出版方未提供摘要)
Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.
AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.
arXiv:2511.09789v2 Announce Type: replace Abstract: Recent advances in deep forecasting models have achieved remarkable performance, yet most approaches still struggle to provide both accurate predictions and interpretable insights into temporal dynamics. This paper proposes CaReTS, a novel multi-task learning framework that combines classification and regression tasks for multi-step time series forecasting problems. The framework adopts a dual-stream architecture, where a classification branch learns the stepwise trend into the future, while a regression branch estimates the corresponding deviations from the latest observation of the target variable. The dual-stream design provides more interpretable predictions by disentangling macro-level trends from micro-level deviations in the target variable. To enable effective learning in output prediction, deviation estimation, and trend classification, we design a multi-task loss with uncertainty-aware weighting to adaptively balance the contribution of each task. Furthermore, four variants (CaReTS1–4) are instantiated under this framework to incorporate mainstream temporal modelling encoders, including convolutional neural networks (CNNs), long short-term memory networks (LSTMs), and Transformers. Experiments on real-world datasets demonstrate that CaReTS outperforms state-of-the-art (SOTA) algorithms in forecasting accuracy, while achieving higher trend classification performance.
arXiv:2606.18312v1 Announce Type: cross Abstract: Federated learning allows multiple clients to jointly train a shared model by sending gradient updates to a central server while keeping raw inputs local. However, prior gradient inversion attacks show that these updates can reveal enough information to reconstruct client inputs. Existing attacks on transformers either optimize dummy inputs to match the true client updates, which is costly and unstable for modern models, or exploit the low rank of attention gradients to identify a subspace containing the true layer embeddings, followed by a discrete membership test for candidate tokens. However, this token test is brittle under numerical noise, i.e., from quantization or Differential Privacy (DP), and scales poorly for encoder models with non-causal attention. We introduce TIGER, a continuous gradient inversion attack that turns this subspace signal into a differentiable objective. Instead of searching over tokens or matching full gradients, TIGER directly optimizes token embeddings to minimize their distance to the subspace. Our experiments demonstrate that on encoder-only models, TIGER substantially improves both reconstruction quality and runtime over existing attacks, while on decoder models, TIGER is more robust than prior subspace-based attacks, enabling the first successful reconstructions in DP-defended federated learning settings.
arXiv:2510.02149v2 Announce Type: replace Abstract: We introduce Action-Triggered Sporadically Traceable Markov Decision Processes (ATST-MDPs), a reinforcement learning framework for partial observability in which full state observations occur stochastically at each step, with probability determined by the chosen action. We derive Bellman equations tailored to this setting and establish the existence of an optimal policy. Exploiting the fact that sporadic observations reveal the full state, we provide an equivalent formulation in which agents commit to action-sequences between consecutive observations. Under the linear MDP assumption, we show that the value function over such action-sequences admits a linear representation in a finite-dimensional feature map, enabling standard regression-based methods. As an application, we derive ATST-LSVI-UCB, an optimistic algorithm achieving regret $\widetilde{O}(\sqrt{Kd^3(1-\gamma)^{-3}})$ for episodic learning with geometrically distributed horizons, where $K$ is the number of episodes, $d$ the feature dimension, and $\gamma$ the discount factor (episode continuation probability), matching the known rate for linear MDPs with full observability.
We used a stochastic simulation model to estimate the effectiveness of combined exit and entry airport screening for Bundibugyo ebolavirus disease (BVD), using natural-history parameters from a Bayesian re-analysis of the 2012 Isiro outbreak. For a 12-hour international flight from DRC or Uganda at 86% screening sensitivity, we estimate 65% of infected travellers would arrive undetected (95% CrI: 38 - 76%). The main driver of this outcome is the relative duration of the the incubation period (approximately 7.7 days) and the onset-to-severe-disease interval (approximately 4 days): most infected travellers board before symptom onset and are undetectable by any syndromic screen, whilst those who are symptomatic progress rapidly to illness severe enough to preclude travel. This is compounded during active epidemic growth, when recently exposed (and therefore pre-symptomatic) cases are overrepresented among travellers. Syndromic airport screening offers limited protection against BVD spread via air travel, and should be complemented by outbreak control at source and strengthened clinical surveillance in receiving countries with high travel connectivity to affected areas.
arXiv:2602.08597v3 Announce Type: replace Abstract: Robust multimodal systems must remain effective when some modalities are noisy, degraded, or unreliable. Existing multimodal fusion methods often learn modality selection jointly with representation learning, making it difficult to determine whether robustness comes from the selector itself or from full end-to-end co-adaptation. Motivated by Global Workspace Theory (GWT), we study this question using a lightweight top-down modality selector operating on top of a frozen multimodal global workspace. We evaluate our method on two multimodal datasets of increasing complexity: Simple Shapes and MM-IMDb 1.0, under structured modality corruptions. The selector improves robustness while using far fewer trainable parameters than end-to-end attention baselines, and the learned selection strategy transfers better across downstream tasks, corruption regimes, and even to a previously unseen modality. Beyond explicit corruption settings, on the MM-IMDb 1.0 benchmark, we show that the same mechanism improves the global workspace over its no-attention counterpart and yields decent benchmark performance.
arXiv:2606.14577v1 Announce Type: cross Abstract: Dual-species atom interferometry in space promises precise tests of the Universality of Free Fall (UFF), with a sensitivity that grows quadratically with the extended interrogation time accessible in weightlessness. These tests demand exquisite control over the expansion energies of both condensed sources as well as over their differential center-of-mass dynamics. We propose a trap-quenched collimation technique featuring in-trap excitations of collective modes compatible with state-of-the-art atom-chip setups. Using NASA's Cold Atom Laboratory aboard the International Space Station, we demonstrate it on a single-species $^{87}$Rb condensate. By controlling the center-of-mass release dynamics we observe free expansion times up to 700 ms and measure a two-dimensional expansion energy of $k_B \cdot 78\pm 9 \;\mathrm{pK}$ in the imaging plane. A detailed model of the magnetically-induced dynamics indicates that this corresponds to a two-dimensional expansion energy of about $k_B \cdot 15^{+12}_{-5}\; \mathrm{pK}$ along two of the condensate's eigenaxes. Finally, we theoretically study this trap-quenched collimation scheme for a $^{41}$K-$^{87}$Rb mixture, predicting a simultaneous collimation that meets the expansion energy requirements for a state-of-the-art UFF test at the $10^{-15}$ accuracy level.
arXiv:2602.19591v3 Announce Type: replace-cross Abstract: Small and Medium Enterprises (SMEs) constitute 99.9% of U.S. businesses and generate 44% of economic activity, yet systematically identifying high-potential SMEs remains an open challenge. We introduce SME-HGT, a Heterogeneous Graph Transformer framework that predicts which SBIR Phase I awardees will advance to Phase II funding using exclusively public data. We construct a heterogeneous graph with 32,268 company nodes, 124 research topic nodes, and 13 government agency nodes connected by approximately 99,000 edges across three semantic relation types. SME-HGT achieves an AUPRC of 0.621 0.003 on a temporally-split test set, outperforming an MLP baseline (0.590 0.002) and R-GCN (0.608 0.013) across five random seeds. At a screening depth of 100 companies, SME-HGT attains 89.6% precision with a 2.14 lift over random selection. Our temporal evaluation protocol prevents information leakage, and our reliance on public data ensures reproducibility. These results demonstrate that relational structure among firms, research topics, and funding agencies provides meaningful signal for SME potential assessment, with implications for policymakers and early-stage investors.
arXiv:2606.12260v1 Announce Type: cross Abstract: How can we design a market of human-generated content for use in training AI models that both enables technological progress and preserves individual incentives for high-quality content creation? Existing approaches take polar positions: a "free-for-all" model based on fair use and a "strong intellectual property rights" model. We show that both fail: Free-for-all does not compensate creators, and – by modeling as a static Stackelberg game – strong intellectual property rights also underpower creative incentives. We find this especially true for more innovative creators, a phenomenon we term the "originality penalty." Extending this insight to a dynamic model, we find another market failure undermining AI model performance, even for an initially good model: Such a model induces greater reliance by humans on AI-assisted creation, resulting in homogenized content feeding back into training, which degrades the model performance – a "curse of precision." We further propose a market design with a data intermediary internalizing cross-creator externalities and subsidizing innovative contributions, thereby restoring efficiency.
Social disadvantage is associated with multimorbidity, but the pathways linking social conditions to disease burden remain poorly understood. We developed an AI-driven multimodal mediation framework that integrates socioeconomic, psychosocial, clinical, laboratory, behavioral, and genomic data from the All of Us Research Program. Modality-specific variational autoencoders were used to derive latent representations of each data domain, and mediation analyses were subsequently performed in latent space to evaluate indirect associations between socioeconomic disadvantage, psychosocial factors, and multimorbidity. The final analytic cohort included 20,804 participants with complete multimodal data. Across 800 exposure–mediator–outcome combinations, mediation signals were concentrated within a small number of latent dimensions. The strongest indirect association linked a socioeconomic disadvantage dimension, a psychosocial vulnerability dimension, and a cardiometabolic multimorbidity dimension (NIE = 0.002517). The psychosocial dimension was characterized by poorer mental health, greater loneliness, lower social well-being, and lower health literacy, whereas the outcome dimension was associated with hypertension, diabetes, hyperlipidemia, obesity, chronic kidney disease, and heart disease. Bootstrap analyses supported the stability of the leading pathway. These findings suggest that psychosocial vulnerability may contribute to the association between socioeconomic disadvantage and cardiometabolic multimorbidity. More broadly, the proposed framework illustrates how AI-based representation learning can be used to investigate complex relationships across high-dimensional multimodal health data.
Dynamic 3D hand reconstruction from egocentric videos is essential for next-generation computing platforms such as AR/VR and AI glasses. Despite its importance, most prior works focus either on multi-view 3D hand reconstruction or on 4D human body reconstruction. Egocentric 4D hand reconstruction remains challenging due to fast head motion, rapid hand dynamics, severe occlusions, and inherent ambiguity from single-view observations. To address these challenges, we introduce Hand-4DGS, the first feed-forward framework for reconstructing dynamic 4D hands directly from egocentric videos, enabling both fast (~60 FPS) inference and strong generalization. Our approach incorporates a mesh-guided representation for structural priors and temporal convolutions to model dynamic motion. We evaluate our framework on two challenging egocentric datasets, H2O and ARCTIC, and demonstrate significant improvements over baselines. Our method benefits from the generalization capability of feed-forward networks and effective 2D image supervision through Gaussian splatting, without requiring expensive 3D hand pose ground-truth annotations.
Objective: To develop and evaluate a deep learning model for five-year breast cancer risk prediction from screening breast ultrasound (BUS) examinations. Methods: This retrospective study included 295,298 breast ultrasound examinations from 122,072 women imaged between 2012 and 2020. Patients were split into training, validation, and test sets; the test set included screening examinations only. BUS-Risk-Net aggregated image features using attention-based multiple instance learning and combined them with age and ultrasound-estimated breast density to predict 2- to 5-year risk. Performance was compared with the full Tyrer-Cuzick model in a matched case-control cohort and with a reduced Tyrer-Cuzick model in the held-out test set. Risk stratification was evaluated within BI-RADS density categories. Results: In the matched case-control cohort (n = 240 women), BUS-Risk-Net achieved a 5-year AUC of 0.632 (95% CI, 0.562-0.702), versus 0.514 for the full Tyrer-Cuzick model (95% CI, 0.440-0.588; p = 0.04). Among 19,548 examinations from 9,015 women eligible for 5-year evaluation in the test set, BUS-Risk-Net achieved an AUC of 0.679 (95% CI, 0.653-0.706), versus 0.594 for the reduced Tyrer-Cuzick model (95% CI, 0.564-0.623; P < .001). Observed 5-year cancer incidence increased across AI-defined risk tiers within each BI-RADS density category, ranging from 0.0% to 5.8% after AI stratification, compared with 2.1% to 3.6% across density categories alone. Discussion: Deep learning models applied to screening breast ultrasound could enable long-term breast cancer risk prediction and stratify risk beyond breast density alone. External and prospective validation is needed before clinical use.
arXiv:2505.02653v2 Announce Type: replace-cross Abstract: The hierarchical Dirichlet process is the cornerstone of Bayesian nonparametric multilevel models. Its generative model can be described through a set of latent variables, commonly referred to as tables within the popular restaurant franchise metaphor. The latent tables simplify the expression of the posterior and allow for the implementation of Gibbs sampling algorithms to approximately draw posterior samples. However, managing their assignments can become computationally expensive, especially as the size of the dataset and the number of levels increase. In this work, we identify a prior for the concentration parameter of the hierarchical Dirichlet process that (i) induces a quasi-conjugate posterior distribution, and (ii) removes the need for tables, leading to more interpretable expressions for the posterior, with both a scalable and an exact algorithm to sample from it. Remarkably, this construction extends beyond the Dirichlet process, leading to a new framework for defining normalized hierarchical random measures and a new class of algorithms to sample from their posteriors. The key analytical tool is the independence of multivariate increments, that is, their representation as completely random vectors.
Step-level caching accelerates diffusion models by exploiting temporal redundancy across denoising steps. Existing methods make per-step cache decisions using threshold-based heuristics, without directly optimizing for final output quality. As a result, their inference latency varies across inputs and is difficult to control at deployment. In this work, we propose BudCache, which inverts this formulation: rather than letting per-step error thresholds dictate the runtime cost, we fix the compute budget in advance and search for the cache policy that best preserves the final output. To tackle the combinatorial complexity of step selection, we combine Simulated Annealing with deterministic Hill Climbing. This offline search identifies high-quality cache policies within minutes and introduces no online search or thresholding overhead during inference. When the compute budget is very tight, we further introduce cache-aware schedule alignment, which adapts the time discretization to the selected cache policy to reduce cache-induced trajectory mismatch. Experiments on FLUX.1-dev and Wan2.1 show that BudCache achieves better generation quality than heuristic caching baselines under the same inference budgets. Code is available at https://github.com/Westlake-AGI-Lab/BudCache
arXiv:2606.18524v1 Announce Type: new Abstract: Looped (weight-tied) Transformers apply a shared residual block $N$ times ($h \leftarrow h + \varepsilon\,f(h)$, same $f$ at each step), increasing effective depth without adding parameters. Prior depth-scaling analyses prescribe $\varepsilon = 1/\!\sqrt{L}$ for depth-$L$ residual networks. We show that this is insufficient for looped architectures: weight sharing makes residual updates correlated across iterations, requiring the stronger scaling $\varepsilon = 1/N$. For multi-layer blocks ($L$ unique layers looped $N$ times), we derive a factored parameterization $\varepsilon = \lambda/(N\!\sqrt{L})$ that separates the two sources of growth: $1/N$ controls the within-layer loop correlation, and $1/\!\sqrt{L}$ controls the across-layer variance. A key consequence is that the optimal learning rate depends only on the number of unique layers $L$, not on the loop count $N$, enabling direct hyperparameter transfer from small to large $N$ without retuning. Experiments on looped Transformers confirm that $1/N$ scaling improves trainability and yields better loss than $1/\!\sqrt{N}$ scaling across loop counts.
Event cameras sense the world through asynchronous brightness changes with microsecond latency and high dynamic range, offering motion fidelity far beyond frame-based sensors and capturing temporal structure that conventional exposures often miss. These properties make events a powerful complement to RGB in autonomous driving, especially under blur, glare, and rapid motion, where frame-based perception can become unreliable. However, existing event-aware vision-language models remain limited to generic perception and do not reveal how event sensing contributes to reasoning and decision-making across the full driving loop. We present EventDrive, a large-scale benchmark and model suite that unifies event streams, RGB frames, and language supervision across four core dimensions: Perception, Understanding, Prediction, and Planning, covering captions, structured QA, grounding, motion-state recognition, trajectory forecasting, and planning tasks. Building on this foundation, EventDrive-VLM introduces a multi-horizon event pyramid and a temporal-horizon mixture-of-experts module to adaptively encode and fuse asynchronous and frame-based information for downstream reasoning. Comprehensive evaluation across diverse tasks shows that event streams provide substantial gains in temporal precision, motion awareness, and robustness, bringing event sensing into the center of driving intelligence.
arXiv:2512.22219v2 Announce Type: replace-cross Abstract: We introduce Mirage Persistent Kernel (MPK), the first compiler and runtime system that automatically transforms multi-GPU model inference into a single high-performance mega-kernel. MPK introduces an SM-level graph representation that captures data dependencies at the granularity of individual streaming multiprocessors (SMs), enabling cross-operator software pipelining, \rev{fine-grained overlap of computation and communication, and other optimizations that are infeasible under the conventional kernel-per-operator execution model}. The MPK compiler lowers tensor programs into optimized SM-level task graphs and generates fast CUDA implementations for each task, while the MPK in-kernel parallel runtime executes these tasks within a single persistent mega-kernel using decentralized scheduling across SMs. Together, these components provide end-to-end kernel fusion with minimal developer effort, while preserving the flexibility of existing programming models. Our evaluation shows that MPK significantly outperforms existing kernel-per-operator LLM serving systems, achieving up to 1.7$\times$ lower end-to-end inference latency and pushing LLM inference performance close to the limits of the underlying hardware. MPK is publicly available at https://github.com/mirage-project/mirage.
arXiv:2606.11691v1 Announce Type: new Abstract: Latent diffusion and flow matching have emerged as leading approaches for synthetic turbulence generation, yet they systematically under-represent dissipation-range amplitudes. We introduce a latent flow matching framework with a spectrally regularized compression stage that directly targets this failure mode. On a 256^2 DNS dataset at Re_f \approx 2250, replacing an MSE-trained VAE with a zone-weighted log-spectral objective raises deep-dissipation retained spectral power from 25% to 94% in reconstruction and from 20% to 79% in unconditional generation. The improved latent representation also yields a substantially better sampling cost-fidelity tradeoff: the MSE-trained latent space imposes a fundamental quality ceiling near DD bias -0.70 that no integrator or step-count can overcome, while the spectrally regularized latent space reaches DD bias -0.117 at just 20 function evaluations. Mechanistically, encoder-decoder swap experiments show that the improvement is driven primarily by encoder-induced latent reorganization rather than decoder capacity, while a support-amplitude decomposition reveals that MSE-trained models behave as conservative suppression models, minimizing pointwise error by attenuating intermittent high-wavenumber structure. Both pipelines recover the second-order structure function and the correct sign of S_3, indicating the correct cascade direction without explicit supervision. A small residual gap in the magnitude of S_3 suggests that phase-coherent triadic organization remains a complementary axis to amplitude fidelity for future generative turbulence models.
arXiv:2606.25261v1 Announce Type: new Abstract: Multi-qubit systems are essential for scalable quantum technologies, but their performance is often limited by decoherence from qubit–qubit interactions and environmental noise. Although environmental decoherence in single-qubit systems and gate fidelity in multi-qubit systems have been widely studied, a predictive framework connecting qubit interactions, concentration, spatial distribution, and bath occupation to relaxation and decoherence times remains lacking. Here, we develop a multi-qubit mean-field Lindblad master equation (MQMF-LME) framework for the population and coherence dynamics of a solid-state qubit in an interacting multi-qubit environment. The framework treats one qubit as the system of interest and the surrounding qubits as an effective bath, incorporating intrinsic relaxation and bidirectional excitation transfer between the system and the bath. Analytical solutions provide closed-form expressions for density-matrix dynamics, steady-state populations, relaxation time $T_1$, and decoherence time $T_2$, while numerical simulations extend the framework to concentration-dependent dynamics, $1/f$-noise-induced dephasing, and material-specific excitation-transfer mechanisms. For a model system with Förster resonance energy transfer (FRET)-mediated excitation exchange, higher qubit concentrations reduce both $T_1$ and $T_2$, whereas $1/f$ noise reduces $T_2$ without changing $T_1$. Applied to Er$^{3+}$-doped CeO$_2$, the framework shows that long-range FRET-mediated excitation transfer reproduces the experimental decrease in relaxation time with dopant concentration, whereas short-range Dexter-type exchange does not, identifying FRET-mediated excitation transfer as the dominant mechanism. The MQMF-LME framework provides a modular route for linking microscopic interactions and environmental noise sources to measurable decoherence times in solid-state multi-qubit systems.
arXiv:2606.13648v1 Announce Type: new Abstract: At first glance, one would imagine that the energy field of the Ising model, the set of edges whose endpoints share the same spin, is stochastically monotone as a function of the coupling constants. However, this is not generally the case. In this paper, we introduce two weaker notions of stochastic domination that make this result true: $p$–weak and $p$–weak$^\dagger$ domination. Both of these notions depend on a parameter $p$ and we find the optimal values $p$ and $p^\dagger$ so that these dominations hold. One of the key ingredient to obtain some of the results is a new stochastic domination relating FK percolations with different parameters $q,\tilde{q}\geq 1$ that is of independent interest.
arXiv:2603.08505v2 Announce Type: replace-cross Abstract: Electrocardiography (ECG) is a low-cost, widely used modality for diagnosing electrical abnormalities like atrial fibrillation by capturing the heart's electrical activity. However, it cannot directly measure cardiac morphological phenotypes, such as left ventricular ejection fraction (LVEF), which typically require echocardiography (Echo). Predicting these phenotypes from ECG would enable early, accessible health screening. Existing self-supervised methods suffer from a representational mismatch by aligning ECGs to single-view Echos, which only capture local, spatially restricted anatomical snapshots. To address this, we propose Echo2ECG, a multimodal self-supervised learning framework that enriches ECG representations with the heart's morphological structure captured in multi-view Echos. We evaluate Echo2ECG as an ECG feature extractor on two clinically relevant tasks that fundamentally require morphological information: (1) classification of structural cardiac phenotypes across three datasets, and (2) retrieval of Echo studies with similar morphological characteristics using ECG queries. Our extracted ECG representations consistently outperform those of state-of-the-art unimodal and multimodal baselines across both tasks, despite being 18x smaller than the largest baseline. These results demonstrate that Echo2ECG is a robust, powerful ECG feature extractor. Our code is accessible at https://github.com/michelleespranita/Echo2ECG.
Router is the cornerstone component to the Mixture-of-Experts models. Serving as expert proxies, the rows of the router matrix compute their similarity to the MoE inputs to determine which subset of experts is activated. Ideally, each router row is designed to encode the expert matrix into this representative vector, such that its dot-product with token can better reflect token-expert affinity. However, there exists no design principles to enforce this condensation. In this paper, we propose to align each router row with the principal singular direction of the associated expert, as this direction provides the most expressive mathematical description of a matrix. Based on this principle, we propose a router redesign with Manifold Power Iteration (MPI). Specifically, it introduces a "Power-then-Retract" paradigm, where a power iteration step is performed on the router weights, followed by a retraction to impose a norm constraint to ensure both efficiency and stability. Theoretically, we show that MPI drives router rows to converge toward the principal singular directions of associated experts. Empirically, we pretrain MoE model across scales from 1B to 11B parameters to confirm that this alignment facilitates more effective MoE models.
Detecting anomalies in industrial objects is an important topic for increasing production efficiency. More complex objects often require the analysis of several view points, which has led to the field of multi-view anomaly detection. We present MATCH, the first multi-view anomaly detection method based on Flow Matching (FM). With the ODE formulation of Flow Matching, we can estimate likelihoods and thereby derive an anomaly score to detect anomalies in multi-view image data at object, image, and pixel-level. The architectural flexibility of FM models allows us to efficiently transform features of different spatial sizes to the normal distribution. We evaluate thoroughly on the already established Real-IAD data set and are also the first to provide a comprehensive evaluation of popular anomaly detection methods for the MANTA-Tiny data set. MATCH achieves state-of-the-art performance in both anomaly detection and segmentation, all while running on consumer-level hardware. By omitting the costly divergence term needed for likelihood estimation, we ensure that MATCH is usable in real-time production scenarios. Lastly, several ablation studies are conducted to validate the methodological choices.