Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
medRxiv (Medicine) 2026-06-11

Long-term Penetrance of Disease Variants in Genes Prioritized for Genomic Newborn Screening: Evidence from Adult Biobanks

Importance: Genomic newborn screening (gNBS) is a potential public health intervention, but its positive predictive value (PPV) remains uncertain. Estimating the prevalence and penetrance of pathogenic and likely pathogenic (P/LP) variants in genes prioritized for screening may clarify the long-term PPV and clinical utility of gNBS. Objective: To compare ICD-based ascertainment, electronic medical record (EMR) review, and clinical assessment of genetic disorders in adults with P/LP variants in 54 genes prioritized for gNBS. Design: Two-cohort observational study with EMR review and clinical assessment in the hospital-based cohort. Setting: The U.K. Biobank (UKB) and Mass General Brigham Biobank (MGBB). Participants: 451,877 adults from the UKB and 53,371 from the MGBB, all with exome sequencing data. Exposures: P/LP variants in 54 genes prioritized through expert consensus for gNBS, in genotypes consistent with each gene's inheritance pattern. Main outcomes and measures: The primary outcome was the absolute difference in the proportion of MGBB participants identified as affected by ICD versus EMR ascertainment. Secondary outcomes included findings from clinical assessments of undiagnosed MGBB participants, corrected UKB penetrance estimates, and extrapolation to U.S.. annual birth cohorts and living adults. Results: P/LP variants were identified in 665 UKB participants (0.15%) and 82 MGBB participants (0.15%), approximately 1 in 650. In MGBB, EMR review revealed that 58/82 individuals (70.7%) were undiagnosed, although 25 of 58 (43.1%) had documented symptoms. Disease-associated ICD codes were found in 39.0% (32/82) of participants, whereas EMR review identified symptoms in 59.8% (49/82, McNemar P

02.
arXiv (CS.CV) 2026-06-16

Pixel-TTS: Image based Text Rendering for Robust Text-to-Speech

Recent advances in pixel-based text modeling show that representing text as images enables models to exploit visual cues for language understanding. Grounding text in its visual form allows structurally similar characters with different Unicode encodings to produce similar embeddings, benefiting cross-lingual and zero-shot scenarios. Conventional text-based approaches treat each character independently, limiting generalization to unseen characters and requiring embedding expansion during cross-lingual adaptation. We propose Pixel-TTS, the first framework for visually grounded speech synthesis. It renders text as images and projects them through a 2D convolutional layer to generate embeddings. This design eliminates embedding matrix expansion during fine-tuning while improving robustness to unseen characters and orthographic variations. Extensive experiments show Pixel-TTS achieves competitive performance with strong baselines, faster convergence and robust zero-shot generalization.

03.
arXiv (CS.CL) 2026-06-15

Fusing Stylometric and Embedding Systems to Estimate Authorship Likelihood Ratios in Japanese

The likelihood ratio framework is widely recognized as the logically and legally sound basis for evidential analysis across forensic sciences, and its importance is increasingly acknowledged in analyses of authorship in textual evidence. To date, however, its application has been confined to English-language texts. Meanwhile, authorship attribution has traditionally relied on a diverse array of stylometric features, even as the rise of pre-trained large language models enables new contextual-embedding approaches. Combining these diverse approaches through fusion promises enhanced performance, yet it has not been applied to integrate stylometric-feature systems with embedding-based systems within the likelihood ratio paradigm. This study is the first to apply likelihood ratio-based forensic text comparison to Japanese digital texts, using ~1,000-character excerpts from blogs, to 1) evaluate system performance and likelihood ratio magnitudes and 2) assess the impact of fusing stylometric-feature systems with embedding-based systems. The results demonstrate that the fused system maintains excellent calibration while 1) increasing consistent-with-fact likelihood ratio magnitudes; 2) decreasing contrary-to-fact likelihood ratio magnitudes and 3) improving overall discriminability. The best-performing fusion achieved a log-likelihood-ratio cost of 0.32484, illustrating both the feasibility of likelihood ratio framework for Japanese and the benefits of fusion across heterogeneous systems.

04.
arXiv (CS.CV) 2026-06-24

NavWM: A Unified Navigation World Model for Foresight-Driven Planning

Conventional visual navigation policies often struggle with myopic decision-making and mode collapse in complex environments. While world models offer a promising alternative, existing paradigms typically isolate perception, generation, and control, failing to capture their shared spatio-temporal dynamics. In this paper, we propose NavWM, a unified navigation world model that seamlessly integrates latent world reasoning, multimodal action prediction, and controllable visual generation. At its core, NavWM leverages latent world tokens to distill geometric and semantic priors, endowing the agent with robust structural understanding. To overcome the limitations of deterministic policies, we introduce an anchor-based multimodal trajectory forecasting framework that generates a diverse action space. This inherent diversity explicitly empowers the generative world model to act as a robust closed-loop planner, utilizing visual foresight to evaluate and select the optimal path. Extensive experiments across diverse robotics datasets demonstrate that NavWM significantly advances the state-of-the-art, delivering remarkable improvements in both high-fidelity future state generation and zero-shot navigation success.

05.
medRxiv (Medicine) 2026-06-23

Innate immunity associates with protection from pneumococcal colonisation, but colonisation does not confer capsule-independent protection

Nasopharyngeal colonisation with Streptococcus pneumoniae is a prerequisite for transmission and disease and represents an important immunising event. While colonisation induces serotype-specific immunity, the mechanisms underlying heterologous protection remain unclear. We developed a controlled human infection model using pneumococcal serotype 15B and investigated colonisation dynamics, immunogenicity, and cross-protection against subsequent heterologous challenge with serotype 6B. Fifty-four healthy adults were intranasally inoculated with 15B at escalating doses. Colonisation rates peaked at 31.4% with 8 x 10 CFU per naris, lower than those historically observed with 6B and 3 strains. Density was also lower than previously observed with other strains. In vitro assays demonstrated that 15B adhered more readily to epithelial cells than 6B, but was less efficiently internalised, potentially reducing attack rates and colonisation density. Colonisation with 15B induced capsular polysaccharide-specific serum IgG, but baseline humoral immune measures did not predict protection from acquisition. Prior colonisation with 15B did not reduce acquisition of 6B upon re-challenge. Analysis of nasal microbiopsy samples revealed distinct innate activation signatures. Resistance to colonisation was associated with elevated baseline MIP-1 and MIP-1{beta} responses upon in vitro stimulation, whereas carriage was associated with enhanced chemokine and IL-6 responses. Local innate immune activation, rather than circulating antibody responses alone, may therefore contribute to colonisation control. We demonstrate that experimental colonisation with 15B does not confer heterologous protection against 6B and highlight the importance of mucosal innate immune conditioning in serotype-independent defence. Strategies enhancing nasal innate immune recruitment and activation may be required for broader protection against pneumococcal colonisation.

07.
arXiv (CS.LG) 2026-06-16

Formalizing and Mitigating Structural Distortion in LLM Attention for Zero-Shot Graph Reasoning

arXiv:2606.15633v1 Announce Type: new Abstract: Large Language Models (LLMs) have shown promise for reasoning over Text-Attributed Graphs (TAGs). However, applying LLMs to graphs requires linearizing their structure into sequences, introducing distortion rooted in the graph bandwidth problem. While this distortion has been shown to degrade performance, it is often attributed to prompt design or model scale, leaving the underlying mechanism unclear. In this work, we show how rotary positional embeddings turn graph linearization into bandwidth-dependent attention decay, suppressing attention between graph-adjacent nodes that are forced far apart in the serialized sequence. This shifts the focus of LLM-based graph reasoning from prompt engineering and scaling toward correcting attention misalignment. Motivated by this analysis, we propose Graph-aligned Language Attention (GaLA), a lightweight, inference-time modification for LLMs. GaLA biases attention toward graph-adjacent nodes while preserving the LLM's sequential inductive biases. Across TAG benchmarks, GaLA improves performance with negligible overhead, demonstrating that distortion is a correctable bottleneck in LLM-based graph reasoning.

08.
arXiv (CS.CV) 2026-06-12

On Pitfalls of $RemOve-And-Retrain$: Data Processing Inequality Perspective

The RemOve-And-Retrain (ROAR) benchmark is widely used to evaluate feature attribution methods, yet its validity remains underexplored from an information-theoretic perspective. We show that model- and data-agnostic post-processing of attribution maps (transformations that, by the data processing inequality, cannot add information about the decision function) can often improve ROAR scores. This means that an improved ROAR ranking is not, by itself, evidence that an attribution map carries more information about the model. We trace this failure mode to a bias toward spatially blurry masks. Experiments on CIFAR-10, SVHN, and CUB-200 show a consistent association between blurriness and ROAR performance, a pattern that also appears in the ROAD variant. We provide guidelines for more cautious removal-based benchmarking, with implications for validating mechanistic understanding of neural network internals.

09.
Nature (Science) 2026-06-15

Daily briefing: Iron-Age human bones were made into tools before interment

作者:

Newly uncovered bones hint at how Iron Age Britons treated their dead. Plus, AI models have failed to beat human mathematicians at research-level problems and the everyday items that make great scientific tools. Newly uncovered bones hint at how Iron Age Britons treated their dead. Plus, AI models have failed to beat human mathematicians at research-level problems and the everyday items that make great scientific tools.

10.
arXiv (quant-ph) 2026-06-24

Anomalous weak values in a generalized Mach-Zehnder interferometer extracted directly from intensity measurements

arXiv:2606.24798v1 Announce Type: new Abstract: Weak values provide a powerful framework for characterizing quantum systems. Their experimental extraction conventionally relies on weak conditioned von Neumann measurements, involving weak interactions and meter states that increase experimental complexity and often limit measurement efficiency. Here we introduce a method to fully characterize path weak-values in a generalized Mach-Zehnder interferometer employing neither meter states nor weak interactions. We experimentally demonstrate the technique in matter-wave interferometry. We identify anomalous weak values and, equivalently, negative quasiprobability distributions, which reflect the nonclassical behavior of the quantum system. The approach relies uniquely on intensity measurements at the output ports of the interferometer combined with controlled relative phase shifts between the paths. The absence of meter states enables considerable simplification of the setup and shorter measurement times, while preserving full access to weak values with comparable or increased accuracy. The scheme is directly applicable to a broad class of experiments involving two-level quantum systems.

11.
arXiv (quant-ph) 2026-06-15

Bandstructure of a coupled BEC-cavity system: effects of dissipation and geometry

arXiv:2504.17730v2 Announce Type: replace-cross Abstract: We present a theoretical model for a transversally driven Bose-Einstein condensate coupled to an optical cavity. We focus on the interplay between different coherent couplings, which can trigger a structural phase transition, known as the superradiant phase transition. Our approach, based on band structure theory and a mean-field description, enables a comprehensive analysis of the nature of the system's excited modes, precursing the phase transitions. By incorporating dissipative couplings, intrinsic to these systems, we find non-Hermitian phenomena such as the coalescence of crossing precursor modes and the emergence of exceptional points (EPs). The general formulation of our model allows us to explain the role of an angle between transverse pump and the cavity deviating from $90^\circ$. This offers us a unified perspective on the plethora of different implementations of such systems.

12.
PLOS Computational Biology 2026-05-29

A prototype-augmented graph representation learning framework for identifying brain disorder-associated genes and facilitating drug repurposing

作者:

by Jiafang Li, Yifei Li, Siying Lin, Jiahua Rao, Huiying Zhao Many genetic loci were identified as associated with neuropsychiatric disorders and neurodegenerative disorders by Genome-wide association studies (GWAS). How these loci impact these diseases is unclear. Advances in deep-learning approaches and multi-omics data have the potential to link GWAS findings with disease mechanisms. Here, we proposed the Multi-omics Graph Transformer Network (MOGT), a semi-supervised graph neural network that leverages graph representation learning to model biological networks derived from multi-omics data to predict disease-associated genes. MOGT outperforms the current approaches in disease gene prediction for two psychiatric disorders and three neurodegenerative/neurological diseases. High-risk genes (HRGs) for Parkinson’s disease (PD) predicted by MOGT were used to drug discovery by integrating with the CMAP database. Finally, 10 drugs were identified as potential candidates. Among them, the effect of drug UK-356618 was experimentally verified in a primary neuron model, showing that UK-356618 reversed the abnormal expression of PD-associated genes and improved the cell-level phenotypes of PD. Together, these results indicate that MOGT can be used to identify HRGs for brain disorders, and these predicted HRGs provide high-level insights into the mechanisms and treatments of brain disorders.

13.
arXiv (CS.AI) 2026-06-18

Do Neural Networks Lose Plasticity in a Gradually Changing World?

arXiv:2602.09234v2 Announce Type: replace-cross Abstract: Continual learning has become a trending topic in machine learning. Recent studies have discovered an interesting phenomenon called loss of plasticity, referring to neural networks gradually losing the ability to learn new tasks. However, existing plasticity research largely relies on benchmarks with abrupt task transitions, without examining whether the abruptness itself contributes to the observed plasticity loss. In this paper, we investigate the role of transition abruptness by simulating gradually changing environments through input/output interpolation and task sampling. We perform theoretical and empirical analysis, showing that the severity of plasticity loss is closely tied to the abruptness of task transitions, and can be substantially reduced when the environment changes gradually.

14.
arXiv (CS.AI) 2026-06-16

Do we have the knowledge we need? Rethinking human-AI decision-making in corporations

arXiv:2606.15575v1 Announce Type: new Abstract: Organizational knowledge is fragmented across a variety of software systems, tacit expertise, and manual documents that have traditionally been designed for human consumption. As AI systems are increasingly deployed and granted decision-making roles, they require access to this knowledge. This raises two questions: how should organizations store and maintain knowledge so that it remains accessible to both humans and future AI systems, and how should agency be allocated between humans and AI across tasks with different risks and levels of uncertainty? In this position paper, we describe how organizational knowledge evolves and contribute a framework that maps task attributes and knowledge availability to recommended agency allocations and control mechanisms. We illustrate the applicability of the framework on two different manufacturing tasks: a routine operation (visual quality inspection) and a one-off strategic decision (factory location), and conclude with opportunities for future research.

15.
arXiv (CS.AI) 2026-06-18

Skill-Guided Continuation Distillation for GUI Agents

arXiv:2606.18890v1 Announce Type: new Abstract: Improving GUI agents typically relies on behavior cloning on expert trajectories. However, as the current policy deviates from the expert policy, it inevitably encounters policy-induced off-trajectory states during closed-loop execution, i.e., states that fall outside the expert trajectories. Since expert trajectories provide no demonstrations for these unseen states, such states receive no effective supervision, leaving the policy unable to select the correct action. To close this supervision gap, we propose Skill-Guided Continuation Distillation (SGCD), an iterative self-improvement framework. SGCD first runs the plain policy without skill guidance for a few steps to reach realistic off-trajectory states. From these states, a skill-guided policy then completes the task and produces successful continuations, which are mixed with expert trajectories to supply supervision over policy-induced off-trajectory states. The skills are extracted from both successful and failed rollouts, consisting of Continuation Plans, Critical Targets, Failure Traps, and Success Criteria. On OSWorld-Verified, SGCD improves the success rate of three base models from the low-30\% range to over 50\%, demonstrating its effectiveness and generality.

16.
arXiv (CS.CL) 2026-06-17

EngTrace: A Symbolic Benchmark for Verifiable Process Supervision of Engineering Reasoning

Large Language Models (LLMs) are increasingly entering specialized, safety-critical engineering workflows governed by strict quantitative standards and immutable physical laws, making rigorous evaluation of their reasoning capabilities imperative. However, existing benchmarks such as MMLU, MATH, and HumanEval assess isolated cognitive skills, failing to capture the physically grounded reasoning central to engineering, where scientific principles, quantitative modeling, and practical constraints must converge. To enable verifiable process supervision in engineering, we introduce EngTrace, a symbolic benchmark built on 90 parameterized templates, each generating unique, contamination-resistant problem instances, spanning three major engineering branches, nine core domains, and 20 distinct areas, yielding 1,350 test cases that stress-test generalization across diverse physical scenarios. Moving beyond outcome matching, we introduce a verifiable two-stage evaluation framework that uses a tiered protocol to validate intermediate reasoning traces alongside final answers through automated procedural checks and a heterogeneous AI Tribunal. Our evaluation of 27 leading LLMs reveals a distinct trade-off between numeric precision and trace fidelity, identifying a complexity cliff where abstract mathematical pre-training fails to translate into the integrative reasoning required for advanced engineering tasks.

17.
arXiv (CS.CV) 2026-06-16

Timestep Rescheduling in Diffusion Inversion

Diffusion inversion, which maps images back to the Gaussian latent space of a diffusion model, is a critical task for image reconstruction and editing. While DDIM enables fast deterministic inversion, it inherently introduces deviations that accumulate into noticeable inversion errors. Existing methods often address this by solving a fixed-point problem but largely overlook how the selection of the diffusion timestep in the noise scheduler influences inversion fidelity. In this work, we reveal that the deviation scale in diffusion inversion is strongly dependent on the timestep size, and exhibits a parabolic trend, with larger errors concentrated at both small and large timesteps. Based on this finding, we propose a simple yet effective nonuniform timestep scheduler that integrates a global rescaling with a local dynamic programming based rescheduling, enabling a strategic allocation of computational effort that minimizes the overall inversion error and preserves higher inversion accuracy. Our method serves as an off-the-shelf enhancement for existing inversion techniques and requires no extra parameters or computational overhead. Through extensive experiments, we verify that integrating our scheduler consistently boosts the performance of existing inversion methods, achieving superior results in image reconstruction and editing.

18.
arXiv (CS.LG) 2026-06-24

EnerInfer: Energy-Aware On-Device LLM Inference

arXiv:2606.23001v1 Announce Type: cross Abstract: On-device LLM inference is increasingly attractive for privacy-preserving, reliable, and cost-effective deployment, yet its energy and thermal costs remain a critical bottleneck. Existing systems primarily optimize for decoding speed, implicitly assuming that faster execution is always preferable. We show instead that on-device LLM inference often has exploitable configuration slack: modestly lowering NPU and memory frequencies preserves quality of experience (QoE) while substantially improving energy efficiency and reducing heat. Realizing this opportunity in production is challenging. The most energy-efficient NPU/DDR setting varies with the model, inference engine, platform, and runtime conditions, with no stable ranking across configurations. Commercial devices further lack component-level power sensing, and shell temperature evolves with request arrivals, response lengths, and thermal history. To address these challenges, we propose EnerInfer, the first on-device LLM inference framework that jointly manages energy efficiency, throughput, and thermal comfort for LLM workloads. EnerInfer replaces per-model profiling and sensor-heavy control with disaggregated, model-structure-aware prediction and ranking-driven online feedback. It predicts throughput and power for unseen LLMs across NPU/DDR frequency settings, selects QoE-satisfying efficient configurations under runtime interference, and uses lightweight limited-horizon thermal prediction to dynamically switch between energy-optimized and thermally constrained inference. Evaluations on real-world LLMs show that EnerInfer improves energy efficiency by up to 65%, 12%, and 24% on phones, a laptop, and a development board, respectively, without QoE violation.

19.
arXiv (CS.LG) 2026-06-17

When Dynamics Models Read the Wrong Time Steps: Label-Free Event Credit Re-Anchoring for Robust Global Readouts

作者:

arXiv:2606.17572v1 Announce Type: new Abstract: Learned dynamics models often answer global physical questions, such as fault severity or impact stiffness, by pooling a per-step feature sequence into one readout vector. This sequence-to-global interface creates an under-studied temporal credit problem: with only trajectory-level supervision, a model can predict accurately in training conditions while reading from abundant smooth correlates rather than the brief physical events that determine the target. We call this failure temporal credit dilution. It is not exposed by the training loss and is not removed by standard physics-informed residuals, because the error lies in where the global readout assigns functional credit. We introduce Credit-in-Event, an interface-level probe for measuring how much pooled credit lands on event steps, and prove in closed form that a pooled linear reader routes credit to a spurious background channel as the event fraction shrinks. We then propose CREST, a training-free and label-free readout that estimates a transient event core from learned features and re-anchors the pooled representation through event-versus-rest contrast. Across simulated gear and impact systems, recurrent and attention encoders, and public bearing vibration data, CREST reduces out-of-distribution error while restoring event credit. Ablations show that stable-step selection and receptive-field shrinking fail, confirming that the gain comes from event-core credit re-anchoring rather than a generic locality or stability prior.

20.
arXiv (CS.CV) 2026-06-16

RQUL-UIE: Revitalizing Quality-Unstable Labels for Underwater Image Enhancement via In-Dataset Self-Supervision

Underwater Image Enhancement (UIE) is essential for mitigating degradations caused by water medium. Although learning-based methods have advanced significantly, most rely on paired datasets with unstable label quality, which bottlenecks model performance. This paper proposes a diffusion-based, in-dataset self-supervised learning strategy designed to exploit the quality distribution of training labels. Specifically, we evaluate label quality via semantic perception embeddings from a pre-trained diffusion model in a training-free manner. These quality scores are subsequently quantized into noise-level indices, guiding a multi-step denoising process for level-wise supervision. This mechanism prevents low-quality labels from degrading the model while maximizing their utility during training. Furthermore, a Fourier-based refinement network is incorporated to explicitly reconstruct high-frequency components. Extensive evaluations demonstrate that our method consistently outperforms SOTA approaches in restoration quality. The code and pre-trained model will be available once accepted in link.

21.
arXiv (CS.CV) 2026-06-18

SuperCarver: Texture-Consistent 3D Geometry Super-Resolution for High-Fidelity Surface Detail Generation

Conventional production workflow of high-precision mesh assets necessitates a cumbersome and laborious process of manual sculpting by specialized 3D artists/modelers. The recent years have witnessed remarkable advances in AI-empowered 3D content creation for generating plausible structures and intricate appearances from images or text prompts. However, synthesizing realistic surface details still poses great challenges, and enhancing the geometry fidelity of existing lower-quality 3D meshes (instead of image/text-to-3D generation) remains an open problem. In this paper, we introduce SuperCarver, a 3D geometry super-resolution pipeline for supplementing texture-consistent surface details onto a given coarse mesh. We start by rendering the original textured mesh into the image domain from multiple viewpoints. To achieve detail boosting, we construct a deterministic prior-guided normal diffusion model, which is fine-tuned on a carefully curated dataset of paired detail-lacking and detail-rich normal map renderings. To update mesh surfaces from potentially imperfect normal map predictions, we design a noise-resistant inverse rendering scheme through deformable distance field. Experiments demonstrate that our SuperCarver is capable of generating realistic and expressive surface details depicted by the actual texture appearance, making it a powerful tool to both upgrade historical low-quality 3D assets and reduce the workload of sculpting high-poly meshes.

22.
arXiv (quant-ph) 2026-06-16

A complexity theory for non-local quantum computation

arXiv:2505.23893v2 Announce Type: replace Abstract: Non-local quantum computation (NLQC) replaces a local interaction between two systems with a single round of communication and shared entanglement. Despite many partial results, it is known that a characterization of entanglement cost in at least certain NLQC tasks would imply significant breakthroughs in complexity theory. Here, we avoid these obstructions and take an indirect approach to understanding resource requirements in NLQC, which mimics the approach used by complexity theorists: we study the relative hardness of different NLQC tasks by identifying resource efficient reductions between them. Most significantly, we prove that $f$-measure and $f$-route, the two best studied NLQC tasks, are in fact equivalent under $O(1)$ overhead reductions. This result simplifies many existing proofs in the literature and extends several new properties to $f$-measure. For instance, we obtain sub-exponential upper bounds on $f$-measure for all functions, and efficient protocols for functions in the complexity class $\mathsf{Mod}_k\mathsf{L}$. Beyond this, we study a number of other examples of NLQC tasks and their relationships.

23.
arXiv (CS.LG) 2026-06-19

Representing Piecewise-Linear Functions by Functions with Minimal Arity

arXiv:2406.02421v2 Announce Type: replace-cross Abstract: Any continuous piecewise-linear function $F\colon \mathbb{R}^{n}\to \mathbb{R}$ can be represented as a linear combination of $\max$ functions of at most $n+1$ affine-linear functions. In our previous paper [``Representing piecewise linear functions by functions with small arity'', AAECC, 2023], we showed that this upper bound of $n+1$ arguments is tight. In the present paper, we extend this result by establishing a correspondence between the function $F$ and the minimal number of arguments that are needed in any such decomposition. We show that the tessellation of the input space $\mathbb{R}^{n}$ induced by the function $F$ has a direct connection to the number of arguments in the $\max$ functions.

24.
arXiv (CS.CL) 2026-06-18

Output Vector Editing for Memorization Mitigation in Large Language Models

Large language models memorize and reproduce sequences from their training data, creating privacy, copyright, and security risks. Existing neuron-level mitigation methods equate editing with zeroing out neuron activations, but the activation only controls whether a neuron engages; the output vector is what writes to the residual stream and, through superposition, encodes multiple features. We propose output vector editing, a constrained-optimization weight edit that locates a small set of MLP neurons responsible for a memorized continuation and minimally modifies their output vectors to introduce a distractor in vocabulary space, redirecting their residual-stream contributions while leaving activations unchanged. Evaluating on four models from 360M to 7B parameters (SmolLM-360M, OLMo-1B, OLMo-7B, Llama2-7B), we center on OLMo-7B (whose open weights and pretraining corpus enable systematic mining) and mine 6831 memorized sequences, achieving up to 87.9% suppression. The 2.7$\times$ gap over zero ablation on the same located neurons shows the suppression comes from the output-vector edit, not localization alone. Four edit modes span a spectrum from aggressive suppression to minimal redirection; in ensemble they cover 96.5% of memorized sequences, while our recommended single-mode configuration reaches 81.5% with no catastrophic locality failures. We further identify a mechanistic boundary at ${\sim}14%$ of sequences unreachable by MLP-only editing; while these failures are not attention-driven overall, ablating the top contributing attention heads recovers 60–64% of them, with stronger recovery on continuations that copy tokens from the prefix, positioning attention as a complementary fallback rather than a primary mechanism. Edit mode ordering and the success-locality trade-off transfer across all four models, with success rates scaling with model size rather than family.

25.
arXiv (CS.CV) 2026-06-12

CRAG: Can 3D Generative Models Help 3D Assembly?

Most existing 3D assembly methods treat the problem as pure pose estimation, rearranging observed parts via rigid transformations. In contrast, human assembly naturally couples structural reasoning with holistic shape inference. Inspired by this intuition, we reformulate 3D assembly as a joint problem of assembly and generation. We show that these two processes are mutually reinforcing: assembly provides part-level structural priors for generation, while generation injects holistic shape context that resolves ambiguities in assembly. Unlike prior methods that cannot synthesize missing geometry, we propose CRAG, which simultaneously generates plausible complete shapes and predicts poses for input parts. Extensive experiments demonstrate state-of-the-art performance across in-the-wild objects with diverse geometries, varying part counts, and missing pieces. Project Page: https://ai4ce.github.io/CRAG/