Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-25

Forced Gap Post-Selection for Quantum LDPC Codes and their Operations

arXiv:2605.20346v2 Announce Type: replace Abstract: We develop a simple and general post-selection strategy for high-rate quantum codes that is transferrable across decoders. After an initial baseline run, the decoder is re-run once per logical observable, and forced in these latter runs to provide a solution where the given observable has the complementary outcome. Shots are rejected that find logically complementary solutions with similar likelihoods compared to the baseline. Using the Relay-BP decoder, we benchmark the strategy on the $72$-qubit and $144$-qubit bivariate bicycle codes, as well as surgery gadgets for the latter. In comparison to previous post-selection strategies, our results offer an improved logical error rate by over a factor of $4$ on the same circuit and physical error rate, and at the same rate of post-selection. Our strategies are also lightweight, relying only on FPGA-friendly belief propagation, whereas the previous best used repeated rounds of a high-latency BP-OSD decoder.

02.
arXiv (CS.LG) 2026-06-16

GPT-Based Fast Simulation of CLAS12 Detector Hits via Conditional Autoregressive Generation

arXiv:2606.16035v1 Announce Type: cross Abstract: Modern particles physics experiments have demonstrated an increasing need for fast, high-fidelity detector simulation as detector components have improved and subsequent computational requirements approach the limits of available resources. Recently, deep generative models have emerged as a promising alternative to traditional Monte-Carlo methods, with recent works drawing inspiration from large language models (LLMs) and self-supervised next-token prediction methods. In this work, we present an application of a GPT-style autoregressive transformer as a fast surrogate model for the calorimeter inside the CLAS12 experiment at the Thomas Jefferson National Accelerator Facility. The model is conditioned on incident momentum and generates realistic detector hits autoregressively across all nine calorimeter layers as sequences of strip, ADC, and TDC tokens. We demonstrate that the model faithfully reproduces hit multiplicity, spatial distributions, energy deposits, and the energy-momentum response of the electromagnetic calorimeter. The generator achieves inference rates exceeding 700 events per second on a single GPU, providing a substantial speedup over traditional Geant4-based simulations while maintaining physics fidelity essential for high-luminosity experimental programs.

03.
arXiv (CS.CV) 2026-06-16

LentiAvatar: Pseudo-Multiview Reconstruction and Subpixel Prism Rendering for Real-Time Stereoscopic Communication

Real-time stereoscopic video communication has long been a goal of immersive telepresence, yet practical systems still require specialized capture rigs or reduce remote users to a single portrait view. We present LentiAvatar, a Gaussian head-avatar system that connects monocular avatar capture with subpixel-encoded glasses-free lenticular display for real-time autostereoscopic communication. From a monocular portrait video, LentiAvatar reconstructs a controllable head avatar and optimizes it for the lateral viewing zones induced by the display. The method uses natural head turns as pseudo-multiview (PMV) supervision to constrain regions that are otherwise weakly observed in monocular training, including hair, ears, jaw contours, and neck boundaries. Reliable side frames are yaw-binned, aligned to virtual cameras, and supervised within a strict head-and-hair domain; contour-aware losses and staged regularization further suppress ghosting, alpha leakage, and depth instability while preserving lateral detail. At runtime, LentiAvatar renders 32 virtual views and encodes them into a 4K lenticular raster with calibrated subpixel-routing masks. The live-tracker prototype sustains 10.65 FPS, and a subject-specific distilled driver raises the same display pipeline to 38.49 FPS.

04.
arXiv (CS.LG) 2026-06-19

Efficient Neural Network Model Selection for Few-Class Application Datasets

arXiv:2606.19712v1 Announce Type: new Abstract: While much effort has focused on developing and benchmarking high-performance neural networks, less attention has been given to how dataset properties, known to practitioners, can guide efficient model selection. Neural models are typically evaluated on datasets with thousands of classes, yet many real-world applications involve fewer than ten. To address this understudied but common setting, we develop a measure of classification difficulty based on data-side properties and show how it enables more efficient model selection for few-class datasets, where traditional approaches are less effective. We term this phenomenon "few-class distinctiveness". Our metric allows comparison of models and datasets 6 to 29$\times$ faster than repeated training and testing. Leveraging this insight, we extend scaled model families below the smallest published models, achieving greater efficiency at similar accuracy, for example models up to 42% smaller than YOLOv5-nano for a mobile robot task. Targeting resource-constrained applications, we demonstrate few-class model selection across mobile robot, drone, and IoT scenarios, highlighting practical gains in efficiency without sacrificing performance.

05.
arXiv (CS.LG) 2026-06-25

LLM Program Optimization via Retrieval Augmented Search

arXiv:2501.18916v2 Announce Type: replace Abstract: Recent work has demonstrated the potential of large language models (LLMs) for program optimization, a key challenge in programming languages. We propose a blackbox adaptation method called Retrieval Augmented Search (RAS) that performs beam search over candidate optimizations; at each step, it retrieves in-context examples from a given training dataset of slow-fast program pairs to guide the LLM. Critically, we find that performing contextual retrieval based on an LLM-generated natural language description significantly outperforms retrieval based on the source code. We also propose AEGIS, a method for improving interpretability by decomposing training examples into ''atomic edits'' that are significantly more incremental in nature. We show that RAS performs up to 2.06$\times$ better than prior state-of-the-art blackbox adaptation strategies on optimizing C++ programs, and that AEGIS performs up to 1.37$\times$ better while making significantly smaller edits. We also show that using RAS improves the mean runtime percentile of Python programs by 10.27 compared to baselines.

06.
arXiv (CS.AI) 2026-06-16

Boosting Knowledge Graph Foundation Models via Enhanced Negative Sampling

arXiv:2605.27023v2 Announce Type: replace Abstract: Knowledge graphs (KGs) have become the core backbone of numerous downstream tasks such as question answering and recommender systems. However, despite all this, KGs are often very incomplete. To perform zero-shot knowledge graph completion in unseen KGs, which have different relational vocabularies from those used for pre-training, KG foundation models (KGFMs) receive a wide range of attention. Existing KGFMs often perform training using random negative triples, which are constructed by replacing the head or tail entity of a positive triple with a random entity. However, these negative triples are often constructed with limited quality, providing weak supervision for KGFM training. In this paper, we propose a simple yet effective adaptive negative sampling approach, KMAS, to enhance existing KGFMs. KMAS constructs hard negative triples through the updated relation embeddings generated from the existing KGFM's relation encoder. To further adaptively align with the evolving capability of the KGFM during the training process, KMAS adjusts the ratio of hard negative triples dynamically throughout the whole training process: after a warmup phrase, it increases the ratio linearly and then decreases linearly. Extensive experiments are conducted over 44 data sets. Experimental results demonstrate that our proposed negative sampling method can enhance many SOTA KGFMs without requiring excessive additional time or memory consumption.

07.
arXiv (CS.CV) 2026-06-25

Streaming-dLLM: Accelerating Diffusion LLMs via Suffix Pruning and Dynamic Decoding

Diffusion Large Language Models (dLLMs) offer a compelling paradigm for natural language generation, leveraging parallel decoding and bidirectional attention to achieve superior global coherence compared to autoregressive models. While recent works have accelerated inference via KV cache reuse or heuristic decoding, they overlook the intrinsic inefficiencies within the block-wise diffusion process. Specifically, they suffer from spatial redundancy by modeling informative-sparse suffix regions uniformly and temporal inefficiency by applying fixed denoising schedules across all the decoding process. To address this, we propose Streaming-dLLM, a training-free framework that streamlines inference across both spatial and temporal dimensions. Spatially, we introduce attenuation guided suffix modeling to approximate the full context by pruning redundant mask tokens. Temporally, we employ a dynamic confidence aware strategy with an early exit mechanism, allowing the model to skip unnecessary iterations for converged tokens. Extensive experiments show that Streaming-dLLM achieves up to 68.2X speedup while maintaining generation quality, highlighting its effectiveness in diffusion decoding. The code is available at https://github.com/xiaoshideta/Streaming-dLLM.

08.
arXiv (CS.AI) 2026-06-12

ToolSense: A Diagnostic Framework for Auditing Parametric Tool Knowledge in LLMs

arXiv:2606.12451v1 Announce Type: new Abstract: Large language models deployed as agents over large tool catalogs face a critical tool-retrieval bottleneck. As embedding-based retrieval approaches rely on compact encoders that may under-capture specialized tool semantics, parametric tool retrieval addresses this by encoding each tool as a virtual token appended to the LLM vocabulary, fine-tuned in two stages (memorization then retrieval SFT) to use the LLM as a retriever, achieving strong performance on standard ToolBench retrieval benchmarks. Yet these benchmarks use verbose, fully-specified queries, and their evaluation applies constrained decoding that restricts outputs to valid token paths, neither reveals whether the model actually understands its tools. We introduce ToolSense, an open-source LLM-powered diagnostic framework that takes any tool catalog as input and automatically generates three benchmarks: a Realistic Retrieval Benchmark (RRB) with queries at three ambiguity tiers, an MCQ probing benchmark, and a QA probing benchmark. Applying ToolSense to ToolBench (~47k tools) and evaluating five parametric model training configurations reveals a knowledge-retrieval dissociation: on RRB queries, several configurations collapse by ~50-64 percentage points compared to fully-specified ToolBench benchmarks, falling below the embedding-model baseline. Additionally, despite strong retrieval performance, some models score near-random on factual probes, suggesting a knowledge-retrieval dissociation. We open-source the ToolSense framework and the ToolBench diagnostic benchmarks at https://github.com/SAP/toolsense.

09.
arXiv (CS.AI) 2026-06-16

Snyk VulnBench JS 1.0: Can LLMs Find the Same Bugs Twice?

arXiv:2606.15762v1 Announce Type: cross Abstract: We ran 300 repeated vulnerability-finding scans to measure how repeatable agentic large language model (LLM) security review is on the same JavaScript code, prompt, and benchmark harness. The headline result is that LLM security findings were unevenly repeatable: reference-matched findings were stable, but extra model reports varied heavily from run to run. Across 250 model runs, 80 of 161 unique unmatched findings appeared in only one of five identical repetitions, while only 22 appeared in all five. By contrast, when Claude matched a Snyk Code reference finding, the behavior was much more stable: 134 of 158 unique reference-matched findings appeared in all five repetitions. The benchmark also shows complementarity. Models consistently found familiar, high-signal exploit shapes, and in one case surfaced a likely Snyk Code product gap. Snyk Code static application security testing (SAST) was deterministic and better at systematically enumerating repeated data-flow sinks. The results support combining agentic LLM review with deterministic SAST rather than treating either technique as a replacement for the other.

10.
arXiv (CS.CV) 2026-06-24

Generative Manifold Distillation: Aligning Restoration Trajectories with Natural Image Prior

Pre-trained image restoration models often fail on out-of-distribution (OOD) real-world degradations. Adapting to these domains is challenging as real-world data lacks paired ground truth, and unsupervised methods often require unstable architectural changes. We propose Generative Manifold Distillation (GMD), which reframes domain adaptation as geometric manifold alignment. GMD operates in a strictly unpaired setting, requiring only low-quality (LQ) target observations. By leveraging the flow-matching dynamics of a frozen text-to-image foundation model, GMD projects off-manifold restorations onto the natural image manifold to generate high-quality pseudo-targets. To ensure stability, a quality-gated manifold filter rejects off-manifold samples, while source-anchored trajectory regularization prevents error accumulation. Ultimately, GMD distills a powerful generative prior into an efficient restoration network. Experiments demonstrate that GMD seamlessly adapts to new distributions using only LQ inputs, drastically improving perceptual quality with zero architectural modifications or added inference latency.

11.
arXiv (quant-ph) 2026-06-11

Fabricating fiber cavity mirror substrates compatible with high coupling efficiency

arXiv:2606.12168v1 Announce Type: cross Abstract: Fiber optical cavities offer small mode volumes and correspondingly strong light-matter interactions in an open Fabry-Perot geometry. However, existing fabrication techniques do not reliably produce substrates with surface profiles amenable to high mode matching between the cavity mode and fiber core, thereby limiting the achievable collection efficiency. Here we present a technique to fabricate fiber mirror substrates while using $in situ$ reflectometry to constrain the achievable mode matching prior to coating. By measuring the back-reflection from freshly cleaved fiber tips, we pre-select 138 fibers compatible with 96.5-99.5% mode matching, and after a single CO$_2$ laser ablation pulse, these fibers remained compatible with 95.3-99.2\%. This simple technique provides rapid feedback during each stage of substrate fabrication, greatly enhancing the yield of viable fiber mirror substrates prior to (expensive) coating runs.

12.
arXiv (CS.AI) 2026-06-17

Brick-DICL: Dynamic In-Context Learning for Automated Brick Schema Classification

arXiv:2606.17637v1 Announce Type: new Abstract: Building Management Systems (BMS) are essential for optimizing energy efficiency and operational performance in modern buildings. However, the lack of standardization across BMS points from different manufacturers creates significant barriers to integration and data utilization. While the Brick schema offers a standardized ontology for building systems, mapping BMS points to appropriate Brick classes presents three critical challenges: (i) the extensive number of Brick classes (936 in the latest version), (ii) limited domain-specific knowledge in large language models (LLMs), and (iii) substantial manual effort required for verification. To address these challenges, we propose Brick-DICL, a two-stage dynamic in-context learning framework for automated Brick schema classification. Brick-DICL consists of two primary components: metadata-RAG, which retrieves relevant examples to enhance LLMs' domain knowledge, and class-RAG, which narrows down potential Brick classes to address the large classification space. Additionally, we implement a multi-LLM filtering mechanism that compares predictions across multiple models, flagging low-confidence classifications for human review. As a result: (i) General: Brick-DICL is applicable to any building management system regardless of manufacturer or metadata format; (ii) Novel and Powerful: as the first dynamic in-context learning approach for Brick schema classification, Brick-DICL achieves significant classification accuracy improvements on building datasets, outperforming existing methods; (iii) Efficient: our multi-LLM filtering strategy reduces manual verification effort, enabling rapid digital building onboarding. Extensive experiments demonstrate Brick-DICL's effectiveness across diverse building datasets, accelerating the path toward standardized, interoperable building management systems.

13.
arXiv (math.PR) 2026-06-17

LP-Based Algorithms for Scheduling in a Quantum Switch

作者:

arXiv:2603.27812v2 Announce Type: replace-cross Abstract: We consider scheduling in a quantum switch with stochastic entanglement generation, finite quantum memories, and decoherence. The objective is to design a scheduling algorithm with polynomial-time computational complexity that stabilizes a nontrivial fraction of the capacity region. Scheduling in such a switch corresponds to finding a matching in a graph subject to additional constraints. We propose an LP-based policy, which finds a point in the matching polytope, which is further implemented using a randomized decomposition into matchings. The main challenge is that service over an edge is feasible only when entanglement is simultaneously available at both endpoint memories, so the effective service rates depend on the steady-state availability induced by the scheduling rule. To address this, we introduce a single-node reference Markov chain and derive lower bounds on achievable service rates in terms of the steady-state nonemptiness probabilities. We then use a Lyapunov drift argument to show that, whenever the request arrival rates lie within the resulting throughput region, the proposed algorithm stabilizes the request queues. We further analyze how the achievable throughput depends on entanglement generation rates, decoherence probabilities, and buffer sizes, and show that the throughput lower bound converges exponentially fast to its infinite-buffer limit as the memory size increases. Numerical results illustrate that the guaranteed throughput fraction is substantial for parameter regimes relevant to near-term quantum networking systems.

14.
Science (Express) 2026-06-18

Dynamic asymmetric strain imprinted into substrates by an oxide thin film | Science

作者: 未知作者

In film-substrate systems, the substrate role is often considered to be limited to providing static mechanical constraints. Dynamic film-substrate interactions when a structural change in the film modifies the substrate are generally disregarded. Using combined X-ray and electron microscopies, we observed that the electrically induced filament in a VO 2 film created strong asymmetric strain in the underlying Al 2 O 3 substate. This asymmetric substrate strain fed back into the film and defined the filament expansion direction, revealing the importance of film-substrate dynamic interactions in determining film functionality. Furthermore, the strain imprint propagated at least tens of microns deep into the substrate, exceeding the film thickness more than 200 times, potentially enabling substrate functionalization as an active mechanical coupling media in 3D-integrated microelectronics architectures.

15.
arXiv (CS.AI) 2026-06-18

DeFAb: A Verifiable Benchmark for Defeasible Abduction in Foundation Models

arXiv:2606.18557v1 Announce Type: new Abstract: A rule-based logic solver resolves every instance in our benchmark in under 50 microseconds with 100% accuracy; the best frontier language model reaches 65% at best and drops to 23.5% under rendering-robust evaluation (worst case over four surface renderings). We introduce DeFAb (Defeasible Abduction Benchmark), a dataset and generation pipeline that converts four decades of publicly funded knowledge bases into formally grounded instances for defeasible abduction: constructing hypotheses that explain anomalies by overriding defaults while preserving unrelated expectations. Because every hypothesis must pass polynomial-time checks for valid derivation, conservativity, and minimality, DeFAb makes logical rigor the instrument for measuring creativity and theoretical reasoning, scoring the disciplined construction of theory revisions rather than fluent but theory-destroying prose. The pipeline pairs taxonomic hierarchies (OpenCyc, YAGO, Wikidata) with behavioral property graphs (ConceptNet, UMLS) to produce 372,648+ instances across 33.75M materialized rules from 18 sources, in three levels with polynomial-time verifiable gold standards. Four frontier models do not reliably internalize defeasible reasoning: rendering-robust Level 2 accuracy is 7.8-23.5%; chain-of-thought variance (~36 pp) exceeds any inter-model gap; and a matched contamination control isolates a +19.4 pp Level 3 gap. We further release DeFAb-Hard (a 235-instance Level 3 difficulty variant; best model 53.3% vs 100% symbolic) and CONJURE (a kernel-verified transformative-creativity variant of 560 Lean 4/Mathlib instances whose gold answers are definitions the proof kernel did not previously contain, judge-free verifier; a pilot finds zero novel concepts). The same verifier doubles as an exact reward for preference optimization (DPO, RLVR/GRPO). Released under MIT at https://huggingface.co/datasets/PatrickAllenCooper/DeFAb.

16.
arXiv (CS.CV) 2026-06-24

Fine-Grained Open-Vocabulary Object Detection with Fined-Grained Prompts: Task, Dataset and Benchmark

Open-vocabulary detectors are proposed to locate and recognize objects in novel classes. However, variations in vision-aware language vocabulary data used for open-vocabulary learning can lead to unfair and unreliable evaluations. Recent evaluation methods have attempted to address this issue by incorporating object properties or adding locations and characteristics to the captions. Nevertheless, since these properties and locations depend on the specific details of the images instead of classes, detectors can not make accurate predictions without precise descriptions provided through human annotation. This paper introduces 3F-OVD, a novel task that extends supervised fine-grained object detection to the open-vocabulary setting. Our task is intuitive and challenging, requiring a deep understanding of Fine-grained captions and careful attention to Fine-grained details in images in order to accurately detect Fine-grained objects. Additionally, due to the scarcity of qualified fine-grained object detection datasets, we have created a new dataset, NEU-171K, tailored for both supervised and open-vocabulary settings. We benchmark state-of-the-art object detectors on our dataset for both settings. Furthermore, we propose a simple yet effective post-processing technique. Our data, annotations and codes are available at https://github.com/tengerye/3FOVD.

17.
arXiv (CS.CV) 2026-06-25

CoLA: Cross-Modal Low-rank Adaptation for Multimodal Downstream Tasks

Foundation models have revolutionized AI, but adapting them efficiently for multimodal tasks, particularly in dual-stream architectures composed of unimodal encoders, such as DINO and BERT, remains a significant challenge. ParameterEfficient Fine-Tuning (PEFT) methods like LowRank Adaptation (LoRA) enable lightweight adaptation, yet they operate in isolation within each modality, limiting their ability in capturing cross-modal interactions. In this paper, we take a step in bridging this gap with Cross-Modal LowRank Adaptation (CoLA), a novel PEFT framework that extends LoRA by introducing a dedicated inter-modal adaptation pathway alongside the standard intra-modal one. This dual-path design enables CoLA to adapt unimodal foundation models to multimodal tasks effectively, without interference between modality-specific and crossmodal learning. We evaluate CoLA across a range of vision-language (RefCOCO, RefCOCO+, RefCOCOg) and audio-visual (AVE, AVS) benchmarks, where it consistently outperforms LORA, achieving a relative gain of around 3% and 2%, respectively, while maintaining parameter efficiency. Notably, CoLA enables the first multitask PEFT framework for visual grounding, bridging a key gap in efficient multimodal adaptation. Code is available at https://github.com/peterwisu/CoLA

18.
arXiv (CS.CV) 2026-06-15

Dual Cross-Attention Siamese Transformer for Rectal Tumor Regrowth Assessment in Watch-and-Wait Endoscopy

Increasing evidence supports watch-and-wait (WW) surveillance for patients with rectal cancer who show clinical complete response (cCR) at restaging following total neoadjuvant treatment (TNT). However, accurate methods to early detect local regrowth (LR) from follow-up endoscopy images during WW are essential to manage care and prevent distant metastases. Hence, we developed a Siamese Swin Transformer with Dual Cross-Attention (SSDCA) to combine longitudinal endoscopic images at restaging and follow-up and distinguish cCR from LR. SSDCA leverages pretrained Swin Transformers to extract domain agnostic features and enhance robustness to imaging variations. Dual cross attention is implemented to emphasize features from the paired scans without requiring any spatial alignment to predict response. SSDCA as well as Swin-based baselines were trained using image pairs from 135 patients and evaluated on a held-out set of image pairs from 62 patients. SSDCA produced the best balanced accuracy (81.76% $\pm$ 0.04), sensitivity (90.07% $\pm$ 0.08), and specificity (72.86% $\pm$ 0.05). Robustness analysis showed stable performance irrespective of artifacts including blood, stool, telangiectasia, and poor image quality. UMAP clustering of extracted features showed maximal inter-cluster separation (1.45 $\pm$ 0.18) and minimal intra-cluster dispersion (1.07 $\pm$ 0.19) with SSDCA, confirming discriminative representation learning. Code and weights available at: https://github.com/Jotanator/SSDCA

19.
arXiv (CS.CV) 2026-06-25

Cross-Modality Structural Guidance in 3D Latent Diffusion for Robust FLAIR Super-Resolution

High-resolution (HR) MRI acquisition is often hampered by scan time constraints, resulting in anisotropic or low-resolution scans (e.g., thick-slice FLAIR) that limit diagnostic accuracy. While deep learning-based super-resolution (SR) methods show promise, they often hallucinate anatomical details, which can compromise brain structural integrity. To mitigate this limitation, we introduce MR-DiffuSR, a Multi-Resolution Diffusion-based Super-Resolution framework that incorporates HR T1w structural image priors to guide the restoration of thick-slice FLAIR scans and operates in the 3D latent space. Our architecture introduces cross-modality structural swin-attention, which derives structural attention maps from the HR T1w and applies them to the low-resolution FLAIR latent features. This design disentangles anatomical structure from modality-specific contrast, effectively preventing hallucinations. Furthermore, we employ a mixed-scale degradation strategy, training the model on a continuum of downsampling factors to ensure robustness to varying slice thicknesses, while optimizing with a DINOv3-based perceptual loss to preserve high-frequency semantic details. Evaluated on the ADNI-4 dataset, MR-DiffuSR surpasses both CNN and 2D diffusion approaches, achieving an average PSNR of 32.46dB, SSIM of 0.97, and LPIPS of 0.07 across all downsampling factors. In downstream white matter hyperintensity segmentation, our model demonstrates exceptional robustness. While baseline performance collapses at 10x down-sampling (Dice: 0.51), MR-DiffuSR maintains a Dice score of 0.63, preserving utility even at 7mm equivalent slice thickness.

20.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

21.
arXiv (quant-ph) 2026-06-25

Collective rotational cat states of molecules in microwave cavities

arXiv:2606.25815v1 Announce Type: new Abstract: We show theoretically that an ensemble of polar molecules coupled to a microwave cavity supports hybrid rotational-photonic cat states. The cavity couples to a symmetric rotor in the bright manifold of $N$ molecules with $\sqrt{N}$-enhancement. In the dispersive limit of the collective strong coupling regime, virtual multilevel transitions induce an effective Kerr nonlinearity, as confirmed by Wigner tomography and a Schrieffer-Wolff analysis, leading to parity-locked cat structure in the cavity sectors. Collective molecular rotations thus provide a new route to hybrid light-matter cat states.

22.
arXiv (CS.AI) 2026-06-24

RetiSEM: Generalising Causal Models for Fragmented Biomedical Data

arXiv:2606.24488v1 Announce Type: cross Abstract: Learning causal models from fragmented biomedical data is challenging because clinical, molecular, and imaging variables are often incomplete or not jointly observed. We propose RetiSEM, a domain-constrained structural equation modelling (SEM) framework for causal graph recovery and mediation analysis under limited multimodal resources. This proposed work organises variables into biologically informed blocks, applies forbidden-edge constraints, and decomposes pathway-level effects into TE, NDE, and NIE components. We evaluate RetiSEM across ten synthetic benchmark scenarios that vary in dimensionality, nonlinearity, causal depth, and pathway structure, together with a fragmented real-world setting that combines NHANES clinical variables with externally derived retinal representations. This approach achieves lower structural error and higher causal accuracy than unconstrained baselines across the synthetic benchmarks. In the real-data analysis, retinal variables behave mainly as downstream biomarker-like indicators, with smaller but detectable indirect effects. These findings support our strategy as an interpretable framework for testing structured causal hypotheses in limited-resource biomedical AI. The code and resources for this work are publicly available at: https://github.com/Inamullah-Colab/ReitSEM.

23.
arXiv (CS.LG) 2026-06-11

Recursive Binding on a Budget: Subspace Carving in Order-p Tensor Memories

arXiv:2606.11391v1 Announce Type: new Abstract: Tensor Product Representations provide the structural fidelity required for symbolic reasoning in models but suffer from exponential dimensionality growth when encoding deep recursive structures. Conversely, Vector Symbolic Architectures maintain constant dimensionality but sacrifice capacity and fidelity due to noisy compression via superposition. In this work, we propose Orthogonal Subspace Carving (OSC), a memory architecture that binds fillers to roles by projecting onto the null space of the role basis before aggregating into a fixed order-p tensor. OSC uses projections to enforce geometric orthogonality between bound structures within a static memory trace. We show that this mechanism decouples the tensor order from the structural depth, enabling deep recursive binding within a constant memory footprint. By performing retrieval via recognition, this construction allows for component vectors that are orders of magnitude smaller than the memory tensor, giving superior memory efficiency in settings involving high superposition. We also show that TPR is a special case of binding in Clifford algebra, and give a Clifford formulation of OSC.

24.
arXiv (quant-ph) 2026-06-17

Optimizing bias-tailored quantum error correction beyond code-capacity noise

arXiv:2606.17709v1 Announce Type: new Abstract: We find that the substantial advantages predicted for bias-tailored quantum error correction (QEC) under code-capacity noise are strongly reduced once realistic syndrome extraction and circuit-level noise models are considered. We start by comparing XZZX codes to rectangular surface codes with a bias-dependent optimised anisotropy. Although code-capacity simulations predict an advantage of rectangular surface codes in the limit of high noise bias, this actually disappears under circuit-level noise, making the XZZX codes the preferred and simplest choice even for platforms that allow for a flexible variation of the code layout adapted to changes in noise calibration. Our results identify bias degradation during syndrome extraction under circuit-level noise as the central limitation of biased-tailored QEC. To partially mitigate this effect, we introduce a bias-filtering CNOT gadget that temporarily encodes the ancillary target qubit during syndrome extraction in a repetition code and, upon measurement and feed forward, manages to reduce the bias degradation. In a regime of high-bias and low-idle errors, this bias-filtering gadget yields a few-percent relative improvement of the XZZX code error threshold, demonstrating that lightweight bias-filtering strategies can recover part of the lost bias-tailoring advantage for realistic circuit-level noise.

25.
arXiv (math.PR) 2026-06-16

Convergence to the Brownian CRT for critical branching Markov processe

arXiv:2601.05906v2 Announce Type: replace Abstract: We prove an invariance principle for a general class of continuous time critical branching processes with finite variance (non-local) branching mechanism. We show that the genealogical trees, viewed as random compact metric measure spaces, converge under rescaling to the Brownian continuum random tree in the Gromov-Hausdorff-weak topology, establishing a universal scaling limit for critical finite variance branching processes.