Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

02.
arXiv (CS.AI) 2026-06-18

Skill-Guided Continuation Distillation for GUI Agents

arXiv:2606.18890v1 Announce Type: new Abstract: Improving GUI agents typically relies on behavior cloning on expert trajectories. However, as the current policy deviates from the expert policy, it inevitably encounters policy-induced off-trajectory states during closed-loop execution, i.e., states that fall outside the expert trajectories. Since expert trajectories provide no demonstrations for these unseen states, such states receive no effective supervision, leaving the policy unable to select the correct action. To close this supervision gap, we propose Skill-Guided Continuation Distillation (SGCD), an iterative self-improvement framework. SGCD first runs the plain policy without skill guidance for a few steps to reach realistic off-trajectory states. From these states, a skill-guided policy then completes the task and produces successful continuations, which are mixed with expert trajectories to supply supervision over policy-induced off-trajectory states. The skills are extracted from both successful and failed rollouts, consisting of Continuation Plans, Critical Targets, Failure Traps, and Success Criteria. On OSWorld-Verified, SGCD improves the success rate of three base models from the low-30\% range to over 50\%, demonstrating its effectiveness and generality.

03.
arXiv (CS.AI) 2026-06-24

Decentralised AI Training and Inference with BlockTrain

作者:

arXiv:2606.24722v1 Announce Type: new Abstract: Frontier AI training is increasingly shaped by access to dense, centrally controlled accelerator clusters. This creates a structural advantage for hyperscalers and large centralized laboratories, and makes open or independent AI efforts depend on scarce capital, privileged infrastructure, and data-center geography. We present Spheroid BlockTrain, a decentralized training protocol in which a model is partitioned into independently trainable blocks, each optimized on a local objective derived from the same global target and composed at inference into one model. On byte-level WikiText, BlockTrain reaches cross entropy 1.359 (perplexity 3.89), within about 0.04 CE of a same-setup end-to-end Transformer reference, while each active worker trains only one block and avoids full-model optimizer state. A shared six-worker block training run reaches CE 1.385 by averaging same-block updates into one assembled model. HTTP/TCP transport experiments move real serialized checkpoints and updates, including a public-IP three-host run that improves CE from 5.580 to 1.811 while moving 15.22 GB. For inference, the current BlockTrain path uses one block-stack traversal per full output and serves over direct TCP across three public-network GPU hosts up to a 75.80B-parameter logical fp16 shape, outperforming a matched plain-autoregressive TCP pipeline baseline because it emits a full sequence per WAN pipeline traversal rather than one token per traversal.

04.
arXiv (CS.CV) 2026-06-16

LentiAvatar: Pseudo-Multiview Reconstruction and Subpixel Prism Rendering for Real-Time Stereoscopic Communication

Real-time stereoscopic video communication has long been a goal of immersive telepresence, yet practical systems still require specialized capture rigs or reduce remote users to a single portrait view. We present LentiAvatar, a Gaussian head-avatar system that connects monocular avatar capture with subpixel-encoded glasses-free lenticular display for real-time autostereoscopic communication. From a monocular portrait video, LentiAvatar reconstructs a controllable head avatar and optimizes it for the lateral viewing zones induced by the display. The method uses natural head turns as pseudo-multiview (PMV) supervision to constrain regions that are otherwise weakly observed in monocular training, including hair, ears, jaw contours, and neck boundaries. Reliable side frames are yaw-binned, aligned to virtual cameras, and supervised within a strict head-and-hair domain; contour-aware losses and staged regularization further suppress ghosting, alpha leakage, and depth instability while preserving lateral detail. At runtime, LentiAvatar renders 32 virtual views and encodes them into a 4K lenticular raster with calibrated subpixel-routing masks. The live-tracker prototype sustains 10.65 FPS, and a subject-specific distilled driver raises the same display pipeline to 38.49 FPS.

05.
arXiv (CS.CV) 2026-06-11

On Aligning Hierarchical Standardized Embedding for Audio-visual Generalized Zero-shot Learning

Audio-visual Generalized Zero-shot Learning (AV-GZSL) is a challenging task that aims to classify both seen and unseen objects or scenes by integrating data from audio and visual modalities. Recent studies primarily focus on fusing or aligning audio and visual features to generate more informative audio-visual embeddings. Also, aligning the audio-visual and textual features of most existing methods relies solely on the optimization objectives. However, those methods neglect the inherent distributional and structural differences between audio-visual and textual modalities. To address this limitation, we propose a method termed Aligning Hierarchical Standardized Embedding (AHSE), which enables hierarchical alignment of standardized audio-visual and textual embeddings within a shared embedding space. Specifically, we first apply Z-score standardization to the fused audio-visual and textual embeddings to reduce distributional mismatches. We then introduce a hierarchical alignment strategy that minimizes discrepancies at the semantic, class, and batch levels, thereby constructing a more robust and well-structured embedding space. This strategy not only preserves semantic and inter-class relationships but also maintains spatial consistency within each batch. Extensive experiments on three benchmark datasets: VGGSound-GZSL, UCF-GZSL, and ActivityNet-GZSL, demonstrate that AHSE achieves competitive performance in zero-shot learning.

06.
arXiv (CS.CV) 2026-06-24

Heterogeneous Knowledge Distillation via Geometry Decoupling and Momentum-Aware Gradient Regulation

Heterogeneous Knowledge Distillation (HKD) aims to transfer knowledge across varying architectures (e.g., from Transformer to CNN) but inherently suffers from severe training instability. We reveal that this instability stems from two highly coupled challenges: massive feature norm discrepancies that cause optimization drag, and severe gradient conflicts between the primary and distillation objectives arising from distinct inductive biases. To achieve stable distillation, we propose SPOFA, a framework built upon a novel Feature and Gradient Dual Stabilization mechanism. Specifically, at the feature level, we introduce a LayerNorm-based decoupling projector that explicitly decouples feature magnitude from direction, creating a bounded and stable space for semantic alignment. At the gradient level, we propose a momentum-driven Exponential Moving Average (MEMA) dynamic scaler. By establishing a robust historical baseline of the optimization trajectory, MEMA actively evaluates instantaneous gradient conflicts and adaptively penalizes harmful distillation signals, guaranteeing stable convergence. Importantly, SPOFA achieves this dual stabilization with an extremely lightweight parameter footprint. Extensive experiments on two mainstream benchmarks demonstrate that SPOFA achieves state-of-the-art accuracy, significantly outperforming computationally expensive methods while introducing only minimal computational overhead compared to standard baselines.

07.
medRxiv (Medicine) 2026-06-19

Extraction of Glaucoma Diagnosis, Type, and Severity from Clinical Notes using Secure Cloud-based Large Language Models

Purpose: To evaluate the performance of secure cloud-based large language models (LLMs) in extracting glaucoma diagnosis, type, and severity from free-text clinical notes in the electronic health record (EHR). Design: Retrospective chart review analysis. Participants: 1,250 subjects from the Bascom Palmer Ophthalmic Repository. Methods: Clinical notes of glaucoma-related encounters between 2014 and 2024 were extracted from the Bascom Palmer Ophthalmic Repository. Two fellowship-trained glaucoma specialists annotated clinical notes for glaucoma presence, type, and severity at the eye level. The dataset was split into development (10%), validation (10%), and test (80%) sets. Development and validation sets were used for prompt engineering and refinement, and the held-out test set was used for evaluation. Five LLMs (Claude Opus 4.6, DeepSeek-V3.2, GPT-5.2, Grok 4.1, and Qwen3.6-35B-A3B) were accessed via Azure AI Foundry within HIPAA-compliant containers. Model performance was assessed using standard metrics. Clinician-entered ICD-10 codes were also compared with adjudicated labels. Main Outcome Measures: Gwet AC1, accuracy, sensitivity, specificity, and F1-score. Results: Inter-grader agreement was high for glaucoma detection (Gwet AC1= 0.930 (95% CI: 0.917-0.945), type classification (Gwet AC1= 0.917 (95% CI: 0.904-0.930), and severity staging (Gwet AC1= 0.901 (95% CI: 0.884-0.916). For glaucoma diagnosis, LLMs demonstrated high overall accuracy, with Claude achieving 97.5%, DeepSeek 96.0%, GPT 96.2%, Grok 94.4%, and Qwen 95.5%. F1 scores for glaucoma detection ranged from 95.4% to 98.9% across models. For glaucoma type classification, accuracies were 97.1%, 94.2%, 94.2%, 94.0%, and 94.4% for Claude, DeepSeek, GPT, Grok, and Qwen, respectively. F1 scores for the most prevalent type (POAG) ranged from 96.3% to 98.9%. For severity staging, accuracies were 95.0%, 94.8%, 94.5%, 94.0%, and 95.2%, respectively, with F1 scores ranging from 89.7% to 96.3% across severity categories and models. ICD-10 codes demonstrated substantially lower performance for type and severity staging, with overall accuracies of 89.2% and 58.5%, respectively. Conclusions: Secure cloud-based LLMs accurately extracted glaucoma diagnosis, type, and severity information from free-text ophthalmology notes, achieving performance approaching expert clinician adjudication while substantially outperforming ICD-based phenotyping approaches, particularly for disease severity classification. These findings demonstrate the potential of LLMs to transform unstructured clinical documentation into scalable, research-ready phenotypic data for large-scale glaucoma cohort development and EHR-based ophthalmic research.

08.
arXiv (CS.AI) 2026-06-15

HierSVA: A Data Synthesis Pipeline, Dataset, and Benchmark for LLM-Driven Hierarchical Hardware Formal Verification

arXiv:2606.13706v1 Announce Type: cross Abstract: We present HierSVA, an integrated suite that combines a pipeline, dataset, and benchmark for LLM-driven hierarchical hardware formal verification. HierSVA-SP pairs an RTL preprocessing toolchain with an LLM-in-the-loop formal verification flow to produce reference SystemVerilog Assertions (SVA) on hierarchical RTL. Applying it to BaseJump STL yields HierSVA-DS, a dataset of 342 modules, with hierarchy metadata and depths 0–9, accompanied by a deep subset of 28 module-bug pairs with natural-language specifications and bug variants. HierSVA-B decomposes assertion quality into six metric axes: syntax correctness, assertion proof success rate, vacuity, specification faithfulness, mutation coverage, and formal core coverage. Applying HierSVA-B to twelve recent LLMs reveals three findings. First, the module-level compile rate is 67.1\%; among generated assertions in evaluable runs, 82.1\% prove non-vacuously, but the corresponding assertion sets detect only 70.2\% of eligible injected faults and cover 36.2\% of the formal core. Second, on 211 evaluable model–module entries in the deep subset, assertion sets flag buggy RTL with 0.87 recall, but 40\% of predicted-buggy outcomes are false positives on correct RTL, limiting precision to 0.60. Third, agentic mode improves S1-style provability and strength metrics, but gains plateau and oscillate. Codes and artifacts are available at \href{https://github.com/HierSVAAnon/HierSVACodeAndArtifacts}{https://github.com/HierSVAAnon/HierSVACodeAndArtifacts}. Dataset is available at \href{https://huggingface.co/datasets/AnonymousHierSVA/HierSVA}{https://huggingface.co/datasets/AnonymousHierSVA/HierSVA}.

09.
arXiv (CS.LG) 2026-06-15

DRIVE: Distributional and Retrieval-Augmented Bidding with Value Evaluation

arXiv:2606.14192v1 Announce Type: new Abstract: Auto-bidding is a core component of real-time advertising systems, where decisions must optimize long-term performance under budget and cost constraints, while online exploration is prohibitively risky. Offline reinforcement learning and, more recently, Transformer-based sequence modeling have shown promise for learning bidding policies from logged data, but their unimodal and purely parametric formulations often collapse multiple effective bidding strategies into suboptimal averaged actions and perform unreliably under sparse or long-tail traffic. To mitigate these limitations, we propose DRIVE (Distributional and Retrieval-Augmented Bidding with Value Evaluation), a unified Transformer-based framework that decouples candidate action generation from decision making for offline auto-bidding. DRIVE combines distributional action modeling, retrieval-augmented candidate generation from high-quality historical decisions, and value-based evaluation to select the most promising bid at inference time. Extensive experiments on AuctionNet and additional offline reinforcement learning benchmarks demonstrate that DRIVE consistently improves bidding performance and generalizes well across multiple Transformer-based methods.

10.
arXiv (CS.CL) 2026-06-18

Decoupling Search from Reasoning: A Vendor-Agnostic Grounding Architecture for LLM Agents

Production LLM agents increasingly depend on real-time search, yet native search grounding bundles retrieval policy, provider choice, evidence injection, cost, latency, and generation behavior behind a single model-provider boundary. This coupling makes grounding hard to inspect, tune, reuse, or port, and can trigger Search-Induced Verbosity that breaks strict output contracts. We present Decoupled Search Grounding (DSG), a vendor-agnostic boundary that moves grounding outside the reasoning model through an MCP-compatible gateway, exposing provider routing, source-aware context rendering, configured fallback, retrieval-depth control, and exact plus semantic caching as first-class controls. Across five frontier models on SimpleQA, FreshQA, and HotpotQA, native search leads on recency-sensitive FreshQA, but DSG exposes a stronger frontier when control matters: on SimpleQA it nearly matches native accuracy (86.1% vs. 87.7%) at 91% lower search cost, preserves concise answer contracts, and reaches a 99.4% warm-cache hit rate with 68% lower latency. Deployed as a shared production grounding layer for large-scale agentic workloads with interchangeable models, DSG matches or slightly exceeds native-search accuracy on an e-commerce query-understanding (QIU) workload while cutting search cost by over 98%. Real-time grounding is best treated as an optimizable interface boundary, not a fixed model feature.

11.
arXiv (CS.LG) 2026-06-24

SEED: Semi-supervised Continual MalwarE Detection for Tackling ConcEpt Drift on a BuDget

arXiv:2605.24903v2 Announce Type: replace-cross Abstract: Machine learning based malware detectors become obsolete over time due to concept drift in benign and malware applications. Recent methods rely on fully labeled data and use hierarchical contrastive loss (HCL) with active learning to improve robustness against drift by exploiting semantic structure in malware representations. However, obtaining labeled data in the security domain is difficult. Under partially labeled settings, HCL suffers significant performance degradation in detecting unseen malware, especially on datasets such as BODMAS where strong semantic structure may not exist. In this paper, we propose SEED, a semantic-structure-agnostic method for malware detection under limited supervision. SEED combines a tailored binary cross-entropy objective with semi-supervised continual learning and active learning. For partially labeled seen tasks, unlabeled samples are projected into a representation space constructed from previously seen data using singular value decomposition, and paired with suitable labeled samples to encourage representation consistency. For unseen tasks with fully unlabeled data, uncertainty is quantified using cosine distance in representation space, and the most uncertain samples are selected for analyst labeling. We evaluate SEED on both Windows and Android malware datasets. Using only 20% labeled data on seen tasks, SEED achieves average AUT improvements of 40% on BODMAS and 14% on AndroZoo for unseen malware detection compared to HCL* (the semi-supervised adaptation of HCL), while remaining competitive on APIGraph. Finally, we introduce a delayed buffer update strategy to reduce label noise propagation during replay and improve learning stability.

12.
arXiv (CS.CV) 2026-06-12

JointEdit3D: Feed-Forward 3D Scene Editing in a Unified Latent Space

Existing 3D scene editing methods typically rely on per-scene optimization over explicit 3D representations or cascaded edit-and-reconstruct pipelines, resulting in high test-time cost, limited 3D awareness, and structural inconsistencies. To couple appearance synthesis and geometry prediction during editing, we build on a unified RGB-geometry reconstruction-generation latent space and adapt it to feed-forward 3D scene editing. The resulting framework, JointEdit3D, performs asymmetric latent inpainting by observing only a single edited RGB reference latent and generating the remaining RGB views and edited geometry latent under source-scene anchoring. JointEdit3D introduces a dedicated SceneAnchor Branch to inject source-scene structure without forcing direct copying, and adopts edit/background-aware losses to balance edited-region fidelity with unedited-content preservation. To address the lack of paired resources for standardized 3D scene editing evaluation, we introduce SceneEdit3D-15K, a dataset with 15K paired editing samples and renderer-provided 3D annotations, together with SceneEdit3D-Bench, a curated 100-sample benchmark. Experiments show that JointEdit3D improves edited-region quality and 3D structural completeness over prior baselines while maintaining competitive background preservation.

13.
arXiv (CS.AI) 2026-06-16

Canonical Variates in Wasserstein Metric Space

arXiv:2405.15768v2 Announce Type: replace-cross Abstract: In this paper, we address the classification of instances represented by distributions on a vector space rather than single points. We consider classification algorithms based on pairwise distances, specifically, the Wasserstein metric between distributions. Central to our investigation is dimension reduction within the Wasserstein metric space to enhance classification accuracy. We introduce a novel approach grounded in the principle of maximizing Fisher's ratio, defined as the quotient of between-class variation to within-class variation. The directions in which this ratio is maximized are termed discriminant coordinates or canonical variates axes. In practice, both between-class and within-class variations are defined as the average squared Wasserstein distances between pairs of distributions, with the pairs either belonging to the same class or to different classes. This ratio optimization is achieved through an iterative algorithm, which alternates between optimal transport and maximization steps within the vector space. Empirical studies are conducted to assess the algorithm's convergence; and experimental results demonstrate that the dimension reduction technique substantially enhances classification performance. Moreover, the new method outperforms well-established algorithms that operate on vector representations derived from distributional data. It also exhibits robustness to variations in how instances are summarized by distributions, such as the number of components in a Gaussian mixture model (GMM) representation.

14.
arXiv (CS.CV) 2026-06-12

Comparing Commercial Depth Sensor Accuracy for Medical Applications

Depth estimation has numerous medical and surgical applications. We benchmark four depth sensors on a porcine bone specimen, a porcine belly specimen, and a silicone kidney phantom using stylus-sampled references. These objects contain several real-world challenges, including homogeneous surfaces, specular surfaces, and subsurface scattering. The comparison includes stereo, structured-light, and time-of-flight sensors at a distance of approximately 50 cm. Specifically, the Intel RealSense D405 (Intel RealSense, United States), PMD Flexx2 (pmdtechnologies, Germany), Stereolabs ZED 2i (Stereolabs, France), and Zivid 2M+ 60 (Zivid, Norway) are compared. The Zivid 2M+ 60 performed best across all objects and metrics considered in this work. The ZED ranked second for real tissue, but last on the phantom.

15.
arXiv (quant-ph) 2026-06-19

Ultrafast nonadiabatic dynamics of tetraphenylsubstituted nitrogen-based heterocycles

arXiv:2604.16897v2 Announce Type: replace-cross Abstract: Tetraphenylpyrazine (TPP) and 2,3,4,5-tetraphenyl-1H-pyrrole (TePP) are closely related heterocycles bearing four phenyl substituents, whose structural similarity makes them a useful pair for comparing how intramolecular flexibility influences excited-state relaxation and emission in the gas phase and in the solid state. TPP is a prototypical solid-state luminescence enhancement (SLE) emitter, exhibiting a markedly increased quantum yield upon molecular aggregation. In contrast, TePP displays similar quantum yields in solution and solid state, characteristic of dual-state emission (DSE). This behaviour indicates that intramolecular rotations are already significantly hindered in the isolated-molecule regime, consistent with our previous observations for TPP and other solid-state emitters (Hernández-Rodríguez et al., ChemPhysChem, 2024, 25, e202400563). To unravel the excited-state dynamics underlying this contrasting behaviour, we performed mixed quantum-classical trajectory simulations on a single molecule of TPP and TePP employing the surface-hopping method. Twelve singlet states were included at the TD-B3LYP-D3/def2-SVP level, which were previously benchmarked against coupled cluster methods. Simulated observables such as gas phase ultrafast electron diffraction (GUED) and time-resolved fluorescence (TR-FL) signals allow us to dissect the distinct deactivation pathways operating in both systems in the gas phase, while also providing mechanistic insight into how these pathways are expected to evolve in solution and solid-state environments.

16.
arXiv (CS.LG) 2026-06-15

On the Influence of the Feature Computation Budget on Per-Instance Algorithm Selection for Black-Box Optimization

arXiv:2605.04954v2 Announce Type: replace-cross Abstract: Per-instance algorithm selection (PIAS) takes advantage of complementarity between a set of algorithms by deciding which algorithm to run on a given instance. This decision is based on features of the instances, which, in the context of black-box optimization (BBO), require a part of the optimization budget to be computed. This raises two questions: (a) from which fraction of the budget spent on feature computation does PIAS become worth it for BBO, and (b) which fraction of the budget optimizes the tradeoff between feature accuracy and PIAS performance. To this end, we perform a broad study where PIAS with varying sampling budgets for feature computation is compared to the single best algorithm on a broad range of algorithm selection scenarios. These scenarios consist of two portfolio sizes, three problem sets, 4 dimensionalities, and 10 target budgets. We find that PIAS is viable for the majority of tested scenarios, even when as much as a quarter of the total budget is spent on feature computation. The tradeoff for the fraction of the budget spent on feature computation to maximize the benefit of PIAS is highly dependent on the specific AS scenario. Further, on average 20 percent of PIAS loss to the virtual best solver is explained by the budget spent on feature computation, highlighting the importance of properly accounting for the feature budget.

17.
arXiv (CS.LG) 2026-06-11

PianoKontext: Expressive Performance Rendering from Deadpan Context

arXiv:2606.12282v1 Announce Type: cross Abstract: Expressive performance rendering (EPR) aims to generate realistic performances constrained on sequences of notes. However, flow matching audio editing models manipulate only synchronized music samples of the same duration, limiting their understanding of expressive timing. We introduce PianoKontext, a flow matching rendering model for classical piano music that generates variable-length performances in the latent space of a pretrained Music2Latent model. We synthesize MIDI scores into deadpan audio and employ Dynamic Time Warping (DTW) in the latent space to construct paired data for training. The aligned embeddings are concatenated in DiT blocks, allowing for a simple and effective learning of the dependencies between the score and performances. Audio samples are available at our demo page: https://realfolkcode.github.io/pianokontext_demo/.

18.
arXiv (CS.CV) 2026-06-16

A Comprehensive Survey of Medical Image Segmentation: Challenges, Benchmarks, and Beyond

Medical image segmentation plays a critical role in clinical diagnostics, treatment planning, disease monitoring, and neurological disorder identification. This article presents a comprehensive review of its systematic development, covering widely used public datasets, representative methods built on the U-Net, Transformer, and SAM architectures, and key evaluation metrics with their differences, followed by an analysis of major challenges from multiple perspectives. Unlike surveys that focus on a single model family or a specific clinical application, this review organizes U-Net-, Transformer-, and SAM-based methods within a unified analytical framework, with a particular focus on their effectiveness in improving segmentation accuracy and efficiency. This work aims to guide future research and support clinical translation of medical image segmentation, with all related resources publicly available in our GitHub repository: https://github.com/andrew-pengyu/Awsome_MedSeg/tree/main.

19.
arXiv (CS.CV) 2026-06-16

Planning with Unified Multimodal Models

With the powerful reasoning capabilities of large language models (LLMs) and vision-language models (VLMs), many recent works have explored using them for decision-making. However, most of these approaches rely solely on language-based reasoning, which limits their ability to reason and make informed decisions. Recently, a promising new direction has emerged with unified multimodal models (UMMs), which support both multimodal inputs and outputs. We believe such models have greater potential for decision-making by enabling reasoning through generated visual content. To this end, we propose Uni-Plan, a planning framework built on UMMs. Within this framework, a single model simultaneously serves as the policy, dynamics model, and value function. In addition, to avoid hallucinations in dynamics predictions, we present a novel approach self-discriminated filtering, where the generative model serves as a self-discriminator to filter out invalid dynamics predictions. Experiments on embodied decision-making tasks show that Uni-Plan substantially improves success rates compared to VLM-based methods, while also showing strong data scalability, requiring no expert demonstrations and achieving better performance under the same training-data size. This work lays a foundation for future research in reasoning and decision-making with UMMs.

20.
arXiv (quant-ph) 2026-06-12

Measuring Control-Plane Openness in Near-Term Quantum Computing: A Rubric, Its Validation, and an Application to Thirteen Vendor Stacks

arXiv:2605.15233v2 Announce Type: replace Abstract: Public access to pulse-level and control-electronics interfaces in commercial quantum computing has bifurcated. This paper proposes a six-axis rubric for measuring control-plane openness, the layer between gate-level circuit specification and physical control electronics, defined operationally so that the same evidence produces the same grade across vendors. The rubric is validated three ways: a blinded re-grading pass, thirty-nine days after the evidence cutoff, that tests whether the cited evidence and the level definitions alone reproduce the recorded grades; a boundary-case methodology that fixes where each level begins and ends; and a published grading protocol that lets others reproduce and contest any cell. We establish that the rubric measures change rather than describing a snapshot by comparing the catalog against the documented control plane before the February 2025 removal of pulse-level access from IBM hardware, and reporting the cells that moved. The rubric is applied to thirteen commercial vendors across superconducting, trapped-ion, neutral-atom, and photonic modalities as of May 1, 2026, as its first application, and one of the three harms the rubric is designed to detect is demonstrated through a reproduction-access audit of five pre-2025 IBM Qiskit Pulse experiments against the access available on current hardware, carried through to a client-side structural port of the audit's selected target to Rigetti Quil-T. The catalog ships as a separate machine-readable artifact under CC-BY-4.0 with per-cell source URLs (https://doi.org/10.5281/zenodo.20163276). The catalog readings will change as vendor policies shift; the rubric is the contribution that survives them.

21.
arXiv (CS.CV) 2026-06-17

Contactless Respiratory Monitoring on Heterogeneous Mobile Robots: A Multimodal Edge-Computing Framework

Respiratory-rate (RR) monitoring is a critical component of remote triage and victim assessment in emergency response, disaster recovery, and infectious-disease scenarios, where minimizing physical contact can reduce responder risk and improve operational safety. However, field deployment of contactless RR monitoring remains challenging due to variable illumination, posture changes, platform heterogeneity, and the impracticality of wearable sensors in hazardous environments. In this paper, we present a modality-adaptive contactless RR monitoring framework for heterogeneous mobile robots with onboard edge computing. The proposed system combines brightness-adaptive sensor selection across RGB, thermal, near-infrared (NIR), and low-light cameras, keypoint-guided chest ROI extraction for posture-robust monitoring, and a signal-quality-index (SQI)-based filtering mechanism for reliable respiratory estimation. We implement and evaluate the framework on three robotic platforms spanning quadruped and wheeled locomotion and multiple edge-computing architectures. Experiments conducted across diverse lighting conditions, subject poses, and robot-to-subject distances demonstrate that the framework generalizes across platforms without per-platform algorithmic retuning, while revealing modality-specific operational boundaries. RGB provides the broadest coverage up to 8m, NIR remains effective up to 6m, thermal is reliable only at short range, and low-light sensing supports monitoring in complete darkness up to 8m. Overall, the results demonstrate the feasibility of multimodal contactless RR monitoring on mobile robots and support its use as a foundation for autonomous triage and victim assessment in hazardous search-and-rescue settings.

23.
arXiv (CS.AI) 2026-06-15

FactoryLLM: A Safe and Open-Source AI Playground for Evaluating LLMs in Smart Factories

arXiv:2606.14119v1 Announce Type: new Abstract: Fault diagnostics and recovery in smart factories is challenging because critical information is dispersed across manuals of multiple machines which are interconnected through the manufacturing process. Large Language Models (LLMs) can provide a promising approach. In this paper, we propose FactoryLLM, a safe and open-source AI playground designed for evaluating different LLM-based retrieval-augmented generation (RAG) models by analysing documents from multiple machines across the manufacturing process. FactoryLLM enables the user to configure the LLM, and assess performance when reasoning over multiple documents, through a dual evaluation setup using both RAGAS and NVIDIA's LLM-as-a-Judge metrics. FactoryLLM is safe because it allows users to run local or open-source LLMs without sharing sensitive industrial data, providing a controlled environment for experimentation. We demonstrate the efficacy of FactoryLLM through a case study which involves an Autonomous Intelligent Vehicle and its Mobile Planner software, evaluating three LLMs across 30 maintenance queries derived from approximately 600 pages of cross-machine documentation. The results suggest that FactoryLLM is effective in cross-machine document reasoning: every model achieved a groundedness score above 0.88. The full code and documentation for community to test FactoryLLM with their manufacturing specific scenarios are publicly available.

24.
arXiv (CS.AI) 2026-06-19

Spatial-Aware Reduction Framework: Towards Efficient and Faithful Visual State Space Models

arXiv:2606.19932v1 Announce Type: cross Abstract: Mamba demonstrates strong efficiency in modeling long visual sequences. However, when token reduction is applied to structurally enhanced Mamba variants, these models exhibit a severe performance collapse. We attribute this degradation to the spatially agnostic nature of existing reduction methods, which violate the two-dimensional structural premise required by the selective scanning mechanism. In this work, we propose STORM, a spatial-aware token reduction framework designed to maintain structural integrity throughout the compression process. STORM reformulates reduction into a structured operation on spatial units, enforcing localized constraints to maintain both grid topology and neighborhood coherence. As a plug-and-play module, STORM equips existing reduction pipelines with explicit spatial awareness without any training. Empirical results demonstrate that STORM achieves state-of-the-art pruning accuracy across diverse vision Mamba backbones under training-free settings. Notably, STORM delivers a substantial accuracy recovery on VMamba, outperforming prior methods by up to 63.3\% in top-1 accuracy. Meanwhile, STORM incurs only a 1.0\% accuracy drop on PlainMamba, achieving performance comparable to ViT.

25.
arXiv (math.PR) 2026-06-16

The existence of invariant sublinear expectations for $G$-SDEs

arXiv:2606.15203v1 Announce Type: new Abstract: In this paper, we study the existence of invariant sublinear expectations of Markovian semigroups on sublinear expectation spaces. To achieve this, we establish a complete metric space of sublinear expectations, on which we extend Harris' method to the nonlinear setting on the convergence of sublinear semigroups. We then explore two cases of $G-$diffusions by studying the Lyapunov function and the local Doeblin condition. One is the $G-$Brownian motion on the unit circle which is the case studied in Feng and Zhao [Zhaonon], but with the new method. Another is the multidimensional $G-$SDEs on the whole space $\mathbb{R}^d$. We establish, for the first time in the literature, the existence of the invariant sublinear expectation for $G-$SDEs under the non-degenerate and weakly dissipative assumption. For this, we prove that for a class of $G-$SDEs, the $G-$expectation can be represented as the supremum of the semigroup of a family of SDEs, of which the regularity is obtained by considering the Bismut-Elworthy-Li formula and the Denis-Hu-Peng representation for the distribution of $G-$Brownian motions.