Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-11

Position: Stop Anthropomorphizing Intermediate Tokens as Reasoning/Thinking Traces!

arXiv:2504.09762v4 Announce Type: replace Abstract: Intermediate token generation (ITG), where a model produces output before the solution, has become a standard method to improve the performance of language models on reasoning tasks. These intermediate tokens have been called \say{reasoning traces} or even \say{thinking traces} – implicitly anthropomorphizing the traces, and implying that these traces resemble steps a human might take when solving a challenging problem, and as such can provide an interpretable window into the operation of the model's thinking process to the end user. In this position paper, we present evidence that this anthropomorphization isn't a harmless metaphor, and instead is quite dangerous – it confuses the nature of these models and how to use them effectively, and leads to questionable research. We call on the community to avoid such anthropomorphization of intermediate tokens.

02.
arXiv (CS.AI) 2026-06-24

VeriPilot: An LLM-Powered Verilog Debugging Framework

arXiv:2606.23759v1 Announce Type: cross Abstract: Verilog debugging remains one of the most time-consuming stages in digital circuit design. Recent advances in Large Language Models (LLMs) have enabled automated debugging; however, most existing approaches rely solely on test outputs and compiler feedback in an end-to-end manner, limiting their effectiveness on complex bugs. A key challenge is that the root cause of an error may be far removed from its observable outputs, making it difficult for LLMs to trace long dependency chains in code. This challenge is further exacerbated in large codebases, where long context lengths hinder efficient reasoning. To address these limitations, we propose VeriPilot, an LLM-powered debugging framework that leverages golden reference models to enable fine-grained bug localization and repair. VeriPilot goes beyond output-level comparison by aligning internal variable semantics between the Verilog design and its corresponding golden model through LLM-based analysis. It then performs step-by-step signal tracing using Control-Data-Flow Graphs (CDFGs) derived from static analysis, identifying a minimal set of suspicious code regions along with their correct counterparts from the golden model. These structured insights are subsequently provided to the LLM to guide reasoning and automated code repair. Experimental results on the Comprehensive Verilog Design Problems (CVDP) benchmark from NVIDIA demonstrate that VeriPilot improves the repair success rate of GPT-4o from 54.3\% to 85.71\%, significantly enhancing both bug localization accuracy and repair effectiveness for complex Verilog designs. The source code and benchmark are publicly available at Github https://github.com/YihanWn/VeriPilot.git.

03.
arXiv (CS.CV) 2026-06-25

In-context Region-based Drag: Drag Any Region to Any Shape

Diffusion models have shown promise in drag-style editing. Previous works mainly focus on point-based drag, which is inherently ambiguous. This paper focuses on region-based drag and introduces a novel In-Context Region-based Drag (ICRDrag) method. Under the in-context learning framework, ICRDrag consumes a source image, a source region mask, and a target region mask, producing the target dragged image. Built upon the basic in-context learning model, we introduce two novel attention regularization: 1) image-mask attention consistency to ensure that a target region attends to similar source regions for image and mask modalities; 2) source-target attention correspondence to ensure the mutual correspondence between source and target regions. To facilitate region-based drag, we also construct Paired Region Dataset (PRD), a large-scale dataset with paired masks and images. Extensive experiments show that ICRDrag significantly outperforms existing methods in both quantitative metrics and user studies, achieving superior editing accuracy and visual fidelity. The dataset, code, and model are available at https://github.com/bcmi/ICRDrag-Region-Drag-Editing.

04.
arXiv (CS.CL) 2026-06-16

Understanding LLM Reasoning for Abstractive Summarization

Reasoning has substantially improved Large Language Models (LLMs) on analytical tasks such as mathematics and code generation, but its value for abstractive summarization remains unclear. To address this gap, we adapt general reasoning strategies to the summarization setting and conduct a large-scale comparative study of 8 reasoning strategies and 3 Large Reasoning Models (LRMs) across 8 diverse datasets, evaluating both summary quality and factual faithfulness. Our results show that reasoning is not a universal solution and its effectiveness depends strongly on the strategy and the summarization setting. In particular, we find a trade-off between summary quality and factual faithfulness. Explicit reasoning strategies often improve reference-based quality, but may weaken factual grounding, whereas implicit reasoning in LRMs shows the opposite tendency. We further find that increasing an LRM's internal reasoning budget does not reliably improve summarization and can even reduce factual consistency. These findings suggest that, for summarization, more reasoning is not always better. Effective reasoning should preserve faithful compression rather than induce over-elaboration. Our source code is publicly available.

05.
arXiv (CS.AI) 2026-06-25

AutoRelAnnotator: Calibrated Model Cascades for Cost-Efficient Relevance Evaluation in Sponsored Search

arXiv:2606.25871v1 Announce Type: cross Abstract: How can we generate high-quality relevance annotations at scale without the cost and delays of human labeling? Relevance annotations are the backbone of search ranking systems which is needed for training data preparation, NDCG evaluation, and root cause analysis. However, human annotation is slow and off-the-shelf LLMs suffer from accuracy on domain-specific tasks. We propose a calibrated model cascade, a systematic approach for cost-efficient offline relevance annotation by routing queries through progressively larger fine-tuned classifiers. Our central insight is that accuracy and cost are orthogonal optimizations: domain-specific fine-tuning drives accuracy, cascading drives cost, and per-class isotonic calibration adds a small but reliable gain on top. Our contribution is threefold: (a) we decompose the gains and show that fine-tuning contributes 20 accuracy points while cascading is approximately accuracy-neutral but halves compute cost, (b) we introduce per-class isotonic calibration as one component of the cascade, contributing a small but statistically significant gain (+0.6 points over the strongest calibration baseline), and (c) we validate the system in production across six offline use cases, processing 150M+ annotations and enabling faster experimentation cycles. Our work is a building block for scalable, high-quality offline annotation pipelines in search and advertising systems.

06.
arXiv (CS.AI) 2026-06-18

The More the Merrier: Combining Properties for ABox Abduction under Repair Semantics for ELbot

arXiv:2606.19197v1 Announce Type: cross Abstract: Abduction is a central approach to explain missing entailments from a knowledge base by providing a hypothesis, that would, if added to the knowledge base, make the missing entailment become true. Abduction under repair semantics has recently been investigated in detail, where several desirable properties and optimality criteria were considered, such as signature-restrictions and minimality in size and of introduced conflicts. Naturally, hypotheses that satisfy more than one of these properties or combine a property with an optimality criterion would be even more desirable for applications. So far, such hypotheses have not been investigated in the literature. In the present paper, we consider the ABox abduction problem for hypotheses satisfying more than one property or additional optimality criteria, for EL_bot under brave and AR semantics. Our main observation is that often requiring additional properties for hypotheses does not lead to an increase of complexity.

07.
arXiv (quant-ph) 2026-06-11

Implementing Hamiltonian Renormalization Group Flow on Quantum Computers with VAPOR

arXiv:2606.11306v1 Announce Type: cross Abstract: While Hamiltonian Lattice Gauge Theory is gaining traction, today's limited numerical capacity leaves simulations affected by discretization errors. This motivates the implementation of renormalization group (RG) techniques to find discretization-error-free operators. To this end, we introduce VAPOR, a variational quantum algorithm that decomposes operators into Pauli strings, identifies RG flow orbits, and determines fixed points of a naively discretized operator. We illustrate this using a toy model of a kinematic operator in a symmetry-restricted SU(2) Yang-Mills theory.

08.
arXiv (CS.CV) 2026-06-12

IterCAD: An Iterative Multimodal Agent for Visually-Grounded CAD Generation and Editing

Computer-Aided Design is pivotal in modern manufacturing, yet existing automated methods predominantly rely on open-loop, one-shot generation, creating a mismatch with iterative real-world practices. In this paper, we present IterCAD, a unified multimodal agent framework for closed-loop, interactive CAD generation and editing. We formulate the task as a multi-turn interaction between a multimodal agent and an executable CAD sandbox, covering three tasks: Drawing-to-Code, Text-to-Code, and Interactive Editing. To support this, we develop a data synthesis pipeline incorporating advanced industrial manufacturing features to generate standard-compliant multi-view engineering drawings, complex code-editing tasks, and high-fidelity interaction trajectories. We optimize the agent via progressive SFT followed by geometry-aware reinforcement learning with viable-prefix masking to enhance code executability and geometric fidelity. Finally, we introduce the IterCAD-Bench evaluation suite and propose the Chamfer Distance Tolerance-Recall (CD-TR) curve alongside its AUC-TR metric, establishing a survivor-bias-free standard that unifies code validity and geometric precision. Extensive experiments demonstrate that IterCAD achieves highly competitive performance across multiple benchmarks, significantly outperforming existing approaches in both code executability and geometric precision, while exhibiting superior capabilities in closed-loop iterative refinement.

09.
arXiv (CS.CL) 2026-06-15

LoSoNA: A Benchmark for Local Social Norm Adaptation in Group Conversations

Online group chats are social spaces with local conversational norms that are rarely stated explicitly. The ability and willingness of LLM-based agents to recognize and adapt to these norms remains mostly unexplored. We introduce LoSoNA, a benchmark for local social norm adaptation in multi-party chat. Each scenario gives a subject model a curated group-chat transcript in which non-subject participants demonstrate a hidden local norm, followed by a final elicitor turn that forces a response revealing whether the subject has inferred that norm. We evaluate eight frontier and open-weight models under four prompting conditions that vary how explicitly the model is told to treat the prior conversation as evidence for how it should answer. Naive prompting remains limited for most models; explicit norm-aware prompting helps unevenly, with Gemini 3.1 Pro reaching $84.2\%$ and Claude Fable 5 reaching $81.6\%$, while several other models show small gains or regressions. LoSoNA contributes to recent calls for evaluating LLM social capabilities by testing whether models can infer local conversational norms from precedent and use them in a one-turn group-chat response.

10.
arXiv (quant-ph) 2026-06-15

OQMD: Single-Qubit Rotation Control Improves Low-CNOT Multiclass Quantum Classification

arXiv:2606.14088v1 Announce Type: new Abstract: Near-term variational classifiers incur substantial error and latency from two-qubit gates, yet practitioners often assume that additional entangling depth is the default route to higher accuracy. This work studies Optimal Quantum Measurement Decoding (OQMD): optimizing how quantum outcomes are mapped to classical labels by training a readout layer before measurement, jointly with the variational circuit, without adding CNOTs. Experiments use trainable triple single-qubit rotations as one concrete, hardware-native realization of OQMD; other single-qubit parametrizations fit the same classical outer loop. On the Iris benchmark with a 30-point stratified test split, the best observed 0-CNOT configuration with OQMD reaches 83.33\% accuracy, with a 96\% at 9 CNOTs, exceeding the best 18-CNOT controls (56.67\%) and the best 18-CNOT configuration with OQMD (66.67\%) under a common protocol. A six-point CNOT-depth series from 0 to 18 (fixed optimizer, iteration budget, random-seed count, and ZXZ readout) shows that the highest raw scores need not occur at the largest template, so aggregate complexity is not summarized by CNOT count alone. Because run-level accuracies are discrete and non-Gaussian, we emphasize best-observed scores and, where a global comparison of pooled runs is required, Mann–Whitney $U$ tests rather than parametric tests on means. Across architectures, OQMD shows statistically consistent but magnitude-dependent gains: large peak lifts on minimal circuits coexist with a small pooled mean shift on complex 18-CNOT runs ($p\approx 0.03$) that is not ``universal'' in the sense of uniformly large practical effects.%

11.
arXiv (CS.AI) 2026-06-18

SafeClawBench: Separating Semantic, Audit-Evidence, and Sandbox Harm in Tool-Using LLM Agents

arXiv:2606.18356v1 Announce Type: cross Abstract: Tool-using language-model agents introduce security failures that go beyond unsafe text: they can disclose protected objects, write persistent memory, send messages, modify databases, or trigger harmful code and tool effects. Existing evaluations often collapse these stages into a single attack success rate, making it difficult to tell whether a model merely agreed with an attacker or actually produced observable harm. We introduce SafeClawBench, a staged benchmark for tool-using agent security with 600 controlled adversarial tasks across six attack families: direct and indirect prompt injection, tool-return injection, memory poisoning, memory extraction, and ambiguity-driven unsafe inference. SafeClawBench reports three separate endpoints: semantic attack acceptance, audit-visible harm evidence, and sandbox-observed tool/state harm. Evaluating five agent endpoints under four prompt-level policies, we find that these endpoints capture different failure modes. Without additional prompt protection, semantic failure rates vary widely across models, from 9.0% to 44.2%. Audited harm evidence is narrower than semantic failure, and under a separate executable protocol some matched task identities produce sandbox harm despite passing the Semantic Core call: in a 12,000-row matched analysis, 291 of 347 observed sandbox harms occur in rows that pass the semantic check. Prompt policies change endpoint outcomes, but their effects depend on both model and protocol. SafeClawBench provides a reproducible framework for comparing agent models and prompt-policy conditions without conflating textual compliance, evidence-supported harm, and executable state changes. The open-source dataset is available at https://huggingface.co/datasets/sairights/safeclawbench.

12.
arXiv (CS.CV) 2026-06-18

Benchmarking Physics-Informed Time-Series Models for Operational Global Station Weather Forecasting

The development of Time-Series Forecasting (TSF) models is often constrained by the lack of comprehensive datasets, especially in Global Station Weather Forecasting (GSWF), where existing datasets are small, temporally short, and spatially sparse. To address this, we introduce WEATHER-5K, a large-scale observational weather dataset that better reflects real-world conditions, supporting improved model training and evaluation. While recent TSF methods perform well on benchmarks, they lag behind operational Numerical Weather Prediction systems in capturing complex weather dynamics and extreme events. We propose PhysicsFormer, a physics-informed forecasting model combining a dynamic core with a Transformer residual to predict future weather states. Physical consistency is enforced via pressure-wind alignment and energy-aware smoothness losses, ensuring plausible dynamics while capturing complex temporal patterns. We benchmark PhysicsFormer and other TSF models against operational systems across several weather variables, extreme event prediction, and model complexity, providing a comprehensive assessment of the gap between academic TSF models and operational forecasting. The dataset and benchmark implementation are available at: https://github.com/taohan10200/WEATHER-5K.

13.
arXiv (CS.CV) 2026-06-15

GarmentSketch: Large-scale Sketch-to-Fashion Benchmark

Fashion sketching is a cornerstone of design workflows, allowing rapid visualization of creative concepts prior to physical prototyping. Yet, progress in sketch-based fashion image synthesis has been hindered by the absence of large-scale, high-quality paired resources. To bridge this gap, we present GarmentSketch, a novel dataset comprising 26,249 fashion sketches across 21 garment categories, each paired with detailed textual descriptions. Captions were produced through a multi-stage pipeline that integrates multiple multimodal large language models (MLLMs) with human-in-the-loop refinement, ensuring both semantic accuracy and descriptive richness. We benchmark GarmentSketch on state-of-the-art generative models, providing baseline performance for sketch-guided text-to-image generation. Our experiments reveal both the promise and the current limitations of existing methods. By offering a comprehensive and richly annotated resource, GarmentSketch establishes a foundation for advancing sketch understanding, fine-grained fashion image generation, and creative human-AI collaboration in design. The dataset will be available at: https://khangbdd.github.io/garmentsketch.

14.
arXiv (CS.CV) 2026-06-24

Does it matter which Gaussians you pick in 4D Gaussian streaming?

Anchor-driven 4D Gaussian streaming methods such as Instant Gaussian Stream (IGS) update a dynamic scene each frame from a compact set of Gaussian anchors, chosen by default with Farthest Point Sampling (FPS) at a fixed budget of $8{,}192$. Because these anchors act as control points that drive the whole scene through linear blend skinning, the rule used to choose them ought to affect reconstruction quality. We test this by holding the IGS pipeline fixed and changing only the sampler, comparing FPS, random, uniform, an opacity-scale heuristic, and a learned policy across budgets and refinement settings on N3DV and MeetingRoom. At deployment budgets the sampler has no measurable effect: a cheap random or uniform sampler at $4{,}096$ anchors matches FPS@8192 within measurement error, the default budget is over-provisioned, and the result holds on a second backbone (3DGStream). The learned policy is mixed rather than consistently better: it can improve the N3DV validation set at tight budgets, but does not give a stable cross-dataset rule, and selection is never the bottleneck because refinement dominates runtime. We will release our full sweep and evaluation protocol as a sampler benchmark.

15.
arXiv (quant-ph) 2026-06-17

Frequency upconversion of infrared signals via molecular cavity optomechanical systems with gain

arXiv:2606.17877v1 Announce Type: new Abstract: Molecular cavity optomechanical systems have recently emerged as a promising platform for enhancing infrared detection sensitivity, owing to their ability to up-convert low-frequency infrared (IR) photons to visible frequency range. Generally, under red-detuned pumping in such systems, the ideal conversion efficiency of the IR signal approaches 1. To overcome this efficiency constraint, we propose a scheme that incorporates gain into the infrared cavity of a molecular cavity optomechanical system comprising two cavities and an ensemble of N molecules. The upconversion process, which relies on IR absorption and Raman scattering associated with specific vibrational modes, is significantly amplified by the incorporation of gain under the red-detuned conditions. Moreover, our analysis demonstrates that the added noise is maintained near 0.5.

16.
arXiv (CS.LG) 2026-06-24

DREG: A Layer-Wise Jacobian Regularization as a General-Purpose Penalty

arXiv:2606.23942v1 Announce Type: new Abstract: We present a large-scale empirical study isolating the contributions of the Derivative Regularization penalty (DREG). Across a fully-crossed factorial sweep of 960 experiments spanning 4 activations, 6 regularizers, 8 datasets, and 5 random seeds, we ask: when, where, and why does DREG work? Our results establish three principal findings. First, DREG achieves the highest overall and clean-regime accuracy among all regularizers evaluated (significantly so against the unregularized baseline, Weight Decay, and IGPen; Wilcoxon $p \leq 0.031$). It ranks second in noise robustness behind Spectral Normalization (SN) - the only two layer-wise regularizers in the study. Second, DREG is globally the best-performing regularizer under GELU, the default activation in modern transformer architectures, particularly on both messy vision and messy NLP benchmarks, suggesting direct applicability to frontier deep learning settings. Third, DREG's advantage over competing regularizers is most pronounced under data scarcity, consistent with its role as a geometric inductive bias that substitutes for the regularizing effect of data volume. Throughout, DREG is applied with a single fixed hyperparameter $\lambda = 10^{-2.5}$ and no per-dataset tuning, supporting its characterization as a plug-and-play regularizer for neural networks with nontrivial Jacobian structure. These findings are consistent with DREG's design: concentrating regularization pressure on layers where the activation derivative is largest, rather than constraining the network uniformly.

17.
arXiv (CS.AI) 2026-06-19

Human Universal Grasping

arXiv:2606.17054v1 Announce Type: cross Abstract: Humans can grasp objects effortlessly, whereas multi-fingered robots are far from this level of generality. We argue that the most natural source of robot grasping data is from humans, who pick up thousands of objects every day. We present HUG, a flow-matching model that generates diverse human grasps for any user-specified object in a single RGB-D image captured from a stereo camera. Using smart glasses, we first collect 1M-HUGs, an egocentric dataset of human grasps spanning 1M frames (27.8 hrs) and 6,707 object instances across 41 buildings. Next, to model the distribution of natural human grasps, our novel flow-matching model fuses RGB and depth observations to output a grasp parameterized by wrist translation, wrist rotation, and MANO hand pose. Predicted grasps can be retargeted to various robot hands, enabling zero-shot grasping in everyday scenes. To standardize evaluation, we build a new simulated benchmark, HUG-Bench, of 90 unseen objects from five geometric categories and various sizes, with metric-scale 3D meshes. We evaluate HUG in the real world on the 30-object test set of HUG-Bench across multiple stereo cameras, robot embodiments, and household environments. HUG outperforms the state-of-the-art grasping baselines by +23% and +34% on our challenging object set. Code, data, benchmark, checkpoints, and an interactive demo are released on our website: https://grasping.io/

18.
arXiv (CS.AI) 2026-06-24

ScaleToT: Generalizing Structured LLM Reasoning for Billion-Scale Low-Activity User Modeling

arXiv:2606.24605v1 Announce Type: new Abstract: Accurate user modeling often depends on rich interaction histories, which are unavailable for billions of low-activity users. Large Language Models (LLMs) can infer latent user states from static profiles, but this reasoning becomes unreliable when profiles are sparse, and applying an LLM to billions of users is prohibitively expensive. We present ScaleToT, which learns structured reasoning from a small LLM-processed subset and extends it to the broader low-activity user population. To improve reasoning reliability, ScaleToT constructs typed user-state chains with a bounded entropy-guided Tree-of-Thought (ToT) refinement procedure. To make this structured reasoning usable from sparse profiles, the teacher-curated chains are used to train a student model on static profiles through supervised fine-tuning (SFT) and Outcome-Driven Segment-Aware Implicit Reward Policy Optimization (OSIPO). ScaleToT then transfers the student's reasoning representations to a lightweight profile encoder, providing shared reasoning signals for the remaining users without LLM inference. We evaluate ScaleToT on lifetime value (LTV) prediction in a billion-scale advertising deployment. A randomized online A/B test increased LT30 by 6.738\%, while offline reasoning covered only 7.32\% of the potential population, greatly reducing compute cost compared with full-population reasoning.

19.
medRxiv (Medicine) 2026-06-24

Who funds stroke trials in Europe? A survey of funding sources for randomised controlled stroke trials by the European Stroke Organisation Trials Alliance (ESOTA) network

Abstract Aims and scope Evidence from randomised controlled trials (RCTs) has transformed stroke care. There are no systematically collected data on the amount of public funding, critical to delivering trials, going into stroke RCTs. To understand the extent of stroke RCT funding by national and EU funding bodies across Europe, the European Stroke Organisation Trials Alliance (ESOTA) conducted a survey of its member nations. Methods This is an observational study of research funding in Europe. The ESOTA steering group sent an electronic survey to the leads of the 16 participating national networks from 14 countries. Structured survey questions included who the funding bodies were in each country, the number of RCT applications put forward for public national or EU funding, the number of successful and failed applications, and the amount of funding granted between 01/01/2022 and 31/12/2023. Results Responses were received from 13 of 14 participating countries. There was significant variation in the number of grant applications submitted by individual countries, ranging from 0-17 during the 24-month survey period. The median number of funded studies per country was 1 (IQR 3, range 0-9) representing a median success rate of 47.1 % (IQR 21.1-59.4%), with no RCTs granted joint European funding. Conclusions Our survey highlights significant inequities in stroke trial funding across Europe. Given the encouraging rate of successful applications overall, it is important for all member networks to submit proposals. This is particularly pertinent for multicentre trials, given the evolution of evidence base in stroke towards large trials, across diverse populations.

20.
arXiv (CS.CV) 2026-06-16

ResEdit: Residual embeddings for precise generative image editing

Conditional diffusion image generators can be repurposed for editing through inversion, without the need for large-scale paired fine-tuning data. However, producing high-quality, targeted edits while maintaining image identity and global consistency remains challenging, as weakly conditioned inversion often embeds conflicting image features into the noise. We demonstrate that incorporating a residual image encoding as additional conditioning enables both improved identity preservation and better editability. We optimize this residual encoding to provide a strong conditioning signal for reconstruction, thereby reducing the reliance on inversion and susceptibility to its aforementioned pitfalls. To ensure this residual does not interfere with desired edits, we incorporate a gradient reversal-based optimization strategy that disentangles the residual from the edited condition. We illustrate our method's ability to produce high-fidelity results across precise intrinsic-based editing and relighting, and show proof-of-concept text-guided manipulation.

21.
arXiv (CS.CV) 2026-06-24

Flood Mapping from RGB imagery using a Vision Foundation Model

Timely, high-resolution maps of flood extent around settlements are essential for emergency response and damage assessment. We consider airborne RGB imagery for flood mapping as it can be collected rapidly at low cost. To produce flood maps, deep learning models for water segmentation are often used. CNN based and small vision transformer models are used. However, they need much data for adaptation to a change of scenery, i.e., another flooding event. Vision foundation models or large vision transformers are known to generalize across domains. Recently, foundation models for Earth observation became available. They are pretrained on satellite data, whose spatial resolution, viewing geometry, and radiometry differ from nadir RGB imagery. Thus, adaptation is required. We investigate how a satellite-pretrained Earth observation foundation model can be adapted to centimeter-scale floodwater mapping from RGB imagery. Specifically, we fine-tune a model we call Prithvi-2.0-UPN consisting of the Prithvi-EO-2.0-600M Vision Transformer combined with a UPerNet decoder for binary water segmentation on two RGB datasets (BlessemFlood21, NeuenahrFlood). In a first experiment we observe that Prithvi-2.0-UPN reaches state-of-the-art results on BlessemFlood21 and NeuenahrFlood, when trained on their datasets. In a second experiment we show that Prithvi-2.0-UPN performs better than state-of-the-art baseline models for transfer to a new flood event (trained on BlessemFlood21, tested on NeuenahrFlood) in a zero-shot setting. However, the performance indicates room for improvement. In this respect, we investigate in a third experiment how performance improves when further fine-tuning the models with small shares of NeuenahrFlood training data: Prithvi-2.0-UPN improves the fastest and reaches almost the performance level when fully trained on NeuenahrFlood, indicating transfer capabilities.

22.
arXiv (CS.CV) 2026-06-12

Measurement-Calibrated Multi-Camera Fusion for Vision-Based Indoor Localization

Indoor vision-based localization systems are affected by detection noise, occlusions, and limited camera coverage, leading to uncertainty at multiple stages of the pipeline. While multi-camera data fusion is widely used to mitigate these issues, it is typically treated as a black-box component and evaluated solely end-to-end, obscuring its mechanistic contributions. To address this gap, this work investigates whether explicitly characterizing single-camera localization errors can be leveraged to calibrate and optimize multi-camera data fusion. We introduce a measurement-calibrated fusion approach that integrates component-wise error quantification, specifically isolating homography calibration, human detection, and motion tracking. A component-wise evaluation is conducted to quantify error contributions from homography calibration, human detection, and motion tracking. Experimental results show that data fusion improves localization accuracy compared to single-camera baselines. While measurement-calibrated fusion provides only limited improvement in absolute accuracy over standard fusion, it substantially reduces trajectory variance and improves motion smoothness, which are critical for applications requiring stable and continuous motion estimates. These results highlight the value of explicit error characterization when designing data fusion strategies for vision-based indoor positioning systems.

23.
arXiv (CS.CL) 2026-06-12

S-GBT: Smooth Growth Bound Tensor for Certified Robustness Against Word Substitution Attacks in NLP

Despite recent progress in Natural Language Processing (NLP), models remain vulnerable to word substitution attacks. Most existing defenses focus on first order sensitivity and measure how much the output changes when the input is slightly perturbed. However, they ignore how this sensitivity evolves, which is described by curvature. When gradients vary sharply, models can still fail. This paper introduces the Smooth Growth Bound Tensor (S-GBT), a second order method that bounds the Hessian element-wise, for which we provide formal theoretical proofs on the resulting robustness bounds. A regularization term is added during training to minimize these bounds. This yields tighter certified robustness against word substitution attacks. The change in the output under word substitution is bounded by both a linear term and a quadratic term. S-GBT is derived for two architectures: Long Short-Term Memory (LSTM) and Convolutional Neural Networks (CNN). The method is integrated directly into the training objective. Its effectiveness is evaluated on multiple benchmark datasets. The results show that combining first and second order regularization improves certified robust accuracy by up to 23.4% compared to prior methods, while clean accuracy remains competitive. These findings indicate that controlling both the gradient and its variation is a promising direction for building more robust models.

24.
arXiv (CS.AI) 2026-06-25

Tinker Tales: A Tangible Dialogue System for Child-AI Co-Creative Storytelling

arXiv:2602.04109v2 Announce Type: replace-cross Abstract: Conversational AI agents are increasingly explored as creative partners, yet how conversation design shapes child-AI dialogue in co-creative settings remains underexplored. We present Tinker Tales, a tangible dialogue system for child-AI collaborative storytelling, in which educational frameworks (narrative development and social-emotional learning) are instantiated as conversation design, shaping how the agent engages children across four narrative stages. The system combines a physical storytelling board, NFC-embedded toys, and a mobile app mediating multimodal interaction through tangible manipulation and voice-based dialogue. We conducted a home-based user study with 10 children (ages 6-8) across two conversation design conditions varying in how the agent structured elaboration, with and without educational scaffolding. Our findings show that prompt framing shapes the form and consistency of children's narrative contributions, structuring how they participate in co-creative dialogue with AI.

25.
arXiv (CS.LG) 2026-06-17

ConTex: Reformulating Counterfactual Generation For Time Series Forecasting

arXiv:2606.18049v1 Announce Type: new Abstract: Decision-making with deep learning-based time series forecasting requires not only accurate predictions but also actionable insights. However, current architectures do not inherently provide such information. Specifically, guidance is needed on how current conditions must be modified to shift from a predicted outcome to a desired future scenario. Counterfactual explanations provide a natural framework for this task, as they represent minimal input changes that alter the model's prediction, indicating when and how intervention is required. Existing approaches rely on instance-wise optimization, leading to inconsistency across instances, high computational costs, and limited applicability in real-time settings. To address these limitations, we reformulate counterfactual generation for time series forecasting as the problem of learning a globally consistent intervention strategy, allowing counterfactuals to be generated through a single shared function. We propose Counterfactual Time Series Explanations (ConTex), a model-agnostic, decomposed architecture comprising a temporal context encoder and a conditional encoder, followed by two heads that capture interventions in terms of temporal relevance and modification strength. This structure overcomes the instability and inconsistency of instance-based approaches by producing targeted, interpretable interventions across time and feature dimensions in a single forward pass, making it suitable for real-time applications. Across multiple forecasting architectures and benchmark datasets, ConTex achieves state-of-the-art validity while generating sparse counterfactuals that minimize the number of necessary interventions. Additionally, our approach reduces computational cost by at least 12-36x compared to instance-wise generation and supports real-time inference at approximately 0.007 seconds.