Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-16

Twisted (co)homology of non-orientable Weyl semimetals

arXiv:2511.22303v3 Announce Type: replace-cross Abstract: The quasi-particle excitations in Weyl semimetals, known as Weyl fermions, are usually forced to emerge in charge-conjugate pairs by the Nielsen–Ninomiya theorem. When the Brillouin zone is non-orientable, this constraint is replaced by a $\mathbb{Z}_2$ charge cancellation, as a result of the chirality becoming ill-defined on such manifolds; this results in configurations with seemingly non-zero total chirality. Here, we set out to explain this behaviour from a purely topological perspective, and provide a classification of non-orientable Weyl semimetal topology in terms of exact sequences of twisted (co)homology groups. This leads to several discoveries of direct physical importance: in particular, we recover the $\mathbb{Z}_2$ charge cancellation in a coordinate-independent way, allowing meaningful limits to be set on its physical interpretation. A detailed discussion is provided on a specific Klein bottle-like topology induced by a momentum-space glide symmetry, including a full review of the insulating and semimetallic invariants of the system and a classification of the surface states on the non-orientable boundary. Beyond this, we provide a complete survey of all possible non-orientable Brillouin zones and their associated invariants, and extend our formalism into the realm of non-Hermitian topological physics and inversion-symmetric Weyl semimetals. Our work exemplifies the vast potential of fundamental mathematical descriptions to not only aid the corresponding physical intuition, but also predict novel and hitherto overlooked phenomena of great relevance throughout the physics research forefront.

02.
arXiv (CS.AI) 2026-06-11

Physics-informed generative AI for semiconductor manufacturing: Enforcing hard physical constraints in generative models by construction

arXiv:2606.11247v1 Announce Type: cross Abstract: Generative models are increasingly used to propose designs, data, and control actions for physical systems, yet many such systems are governed by hard physical constraints rather than by perceptual plausibility. Semiconductor manufacturing provides a demanding test case: generated masks, layouts, synthetic defect data, and process recipes must obey lithography, transport, reaction, and device-physics constraints, because physically invalid samples are not merely low quality but unusable. This Perspective argues that semiconductor manufacturing exposes a broader computational-science challenge, namely that generative AI for constrained physical domains must be physics-informed by construction, not corrected only through post-hoc filtering. We survey the emerging architectural toolkit, including physics-informed diffusion, PDE-constrained variational models, neural-operator priors, and conservation-law-respecting generative networks, and show how it connects to differentiable lithography, TCAD, process simulation, and autonomous experimentation. We identify four integration patterns between generative models and physics-based simulators, and we propose a research agenda centered on physics-fidelity benchmarks, differentiable simulator infrastructure, and multimodal foundation models for physical design and manufacturing. The central claim is analytical rather than rhetorical: where physical validity is the binding criterion of success, architectures that enforce it by construction should be expected to outperform those that filter for it after the fact, and the fab is the setting where this distinction is sharpest.

03.
arXiv (quant-ph) 2026-06-19

On the significance of Wigner's Friend in contexts beyond quantum foundations

arXiv:2402.08727v3 Announce Type: replace Abstract: There has been a surge of recent interest in the Wigner's Friend paradox, sparking several novel thought experiments and no-go theorems. The main narrative has been that Wigner's Friend highlights a counterintuitive feature that is unique to quantum theory, and which is closely related to the quantum measurement problem. Here, we challenge this view. We argue that the gist of the Wigner's Friend paradox can be reproduced without assuming quantum physics, and that it underlies a much broader class of enigmas in the foundations of physics and philosophy. To show this, we first consider several recently proposed Extended Wigner's Friend scenarios, and demonstrate that some of their implications for the absoluteness of observations can be reproduced by classical thought experiments that involve the duplication of agents. Crucially, some of these classical scenarios are technologically much easier to implement than their quantum counterparts. Then, we argue that the essential structural ingredient of all these scenarios is a feature that we call "Restriction A": that a physical theory cannot give us a probabilistic description of the observations of all agents. Finally, we argue that this difficulty is at the core of other puzzles in the foundations of physics and philosophy, and demonstrate this explicitly for cosmology's Boltzmann brain problem. Our analysis suggests that Wigner's Friend should be studied in a larger context, addressing a frontier of human knowledge beyond quantum foundations: to obtain reliable predictions for experiments in which these predictions can be privately but not intersubjectively verified.

04.
arXiv (CS.CV) 2026-06-16

Structure-aware Knowledge-guided Heterogeneous Mamba for Zygomaticomaxillary Suture Assessment

The Zygomaticomaxillary Suture is a key circummaxillary structure that connects the zygomatic bone and the maxilla, which serves as a primary site of resistance during maxillary advancement, and its maturation status directly influences the timing and efficacy of orthopedic interventions. However, accurate staging of ZMS maturation remains challenging due to subtle high-frequency transitions in suture lines and the global semantic ambiguity between adjacent stages. To address this, we present the first public ZMS dataset, comprising 3,790 ZMS images covering the entire age range from 4 to 24 years. Based on this dataset, we propose SKMamba, a Structure-aware and Knowledge-guided Mamba-based multi-modal framework for automated ZMS maturation assessment. SKMamba adopts a decoupled dual-path architecture that mimics the hierarchical diagnostic process used by experienced orthodontists. We first introduce an Implicit Edge Extractor (IEE), which leverages structural pre-training to reduce trabecular noise and accentuate sutural boundaries. Complementarily, a Cross-Modal Semantic Alignment (CSA) module is designed to incorporate anatomical descriptions from a large language model (LLM). This module helps align local morphological cues with global semantic descriptions while ensuring that objective morphological evidence remains the primary basis for decisions. Extensive experiments on our ZMS dataset demonstrate that SKMamba achieves state-of-the-art performance compared to existing methods. Code is available at https://github.com/galaxygxq1116/SKMamba.

05.
arXiv (CS.CV) 2026-06-12

Zero-Shot Captioning for Cultural Heritage: Automated Image Analysis of Traditional Indonesian Clothing

This paper presents Custom ZeroCLIP, a retrieval-augmented vision-language framework for zero-shot captioning of Indonesian traditional garments. The dataset contains 3,800 expert-annotated images from all 38 Indonesian provinces. Using a province-level inductive zero-shot protocol, the model is trained on 24 seen provinces, validated on 6 seen provinces, and evaluated on 8 unseen provinces. The framework combines a frozen CLIP ViT-B/32 image encoder, a CLIP text encoder, a BERT text encoder, and an LSTM caption decoder. During inference, unseen-province labels and captions are unavailable, and retrieval uses only captions from training provinces. No unseen-province image, label, or caption is used during training, validation, or retrieval-bank construction. Custom ZeroCLIP achieves a CLIPScore of 0.8536, BLEU-4 of 0.3342, and METEOR of 0.4859, outperforming existing baselines. Ablation results show that retrieval improves cultural vocabulary recovery with a 19.3\% METEOR gain, while human evaluation confirms stronger cultural accuracy and fluency. The results demonstrate the effectiveness of retrieval-augmented domain adaptation for culturally grounded caption generation in low-resource heritage settings. The dataset is publicly available at https://github.com/AnugrahAidinYotolembah/Traditional-Indonesian-Clothing-Captioning-Dataset.

06.
arXiv (math.PR) 2026-06-12

Data-driven subsampling rates for diffusion parameter estimation of SDEs

arXiv:2606.13615v1 Announce Type: new Abstract: We study the problem of diffusion parameter estimation for stochastic differential equation (SDE) models in scenarios where data and model are compatible only on specific scales that have yet to be determined. We introduce a simple and efficient method for selecting suitable rates at which given time series data should be subsampled in order to ensure that the statistical structure of the subsampled data is consistent with the behavior of the SDE model on an infinitesimal scale. Our approach is based on analyzing the statistics of the lengths of monotonically increasing or decreasing segments in the subsampled data sequence, which we refer to as monotone runs. As an analytical foundation, we prove for a large class of SDEs with additive noise that the lengths of monotone runs at an infinitesimal scale are approximately geometrically distributed with success probability $1/2$. This universal characterization is employed to derive an automated method for selecting appropriate subsampling rates for given time series data that is directly applicable in real-world scenarios and does not rely on an asymptotic framework of multiscale diffusions. The approach is demonstrated using an application from industrial mathematics concerning surrogate models for fiber lay-down curves in production processes of nonwoven textiles.

07.
arXiv (CS.AI) 2026-06-17

Surveying GenAI-based Automation in Printed Circuit Board Design and Test

arXiv:2606.17074v1 Announce Type: cross Abstract: Generative artificial intelligence (GenAI) is increasingly used for applications in the hardware and software domains. It purports to reduce the manual effort involved in the development and testing of complex systems before release. Within the hardware space, most tasks have focused on design automation of integrated circuits, particularly with hardware description languages. However, other types of hardware also exist! In this survey, we instead examine how GenAI has been and is being across the printed circuit board (PCB) design life cycle. This includes everything from supply chains, system specification, circuit design, layout and optimisation, validation and test, and PCB assembly and distribution. Through this lens we present a taxonomy of discovered works, categorising them according to their intent and contributions. This survey also identifies key technical challenges that GenAI faces in this space, such as domain-specific data scarcity and limited support for integration with existing PCB tools. Finally, future research directions are discussed: our survey shows that there are many opportunities remaining when considering how GenAI may be integrated into various tasks in PCB design and test.

08.
arXiv (CS.CV) 2026-06-18

Test-Time Adaptation in Optical Coherence Tomography Using Trajectory-Aligned Time-Independent Flow

Optical coherence tomography (OCT) is essential in ophthalmology, but inconsistent image quality especially in low-cost devices hinders automated analysis. To address this, we introduce a flow-matching-based test-time adaptation method that generates high-quality surrogate images from noisy inputs. Typically, domain gaps between test and training data cause pixel distribution mismatches during the denoising process. We overcome this by matching the test image's histogram to synthetic reference trajectories, successfully aligning the input with expected distributions. Additionally, we remove the network's time conditioning to account for slight deviations in real-world noise distributions. Our approach achieves state-of-the-art performance in segmenting critical biomarkers for two stages of Age-related Macular Degeneration (AMD). Code is available: https://github.com/Veit21/tta-flow.

09.
arXiv (CS.LG) 2026-06-25

Memory-Efficient Policy Libraries with Low-Rank Adaptation in Reinforcement Learning

arXiv:2606.25700v1 Announce Type: new Abstract: When fine-tuning Large Language Models (LLMs), there has been success in minimizing both memory usage and computation with Parameter-Efficient Fine-Tuning (PEFT), like Low Rank Adaptation (LoRA). In this article, we have explored whether this approach is transferable to the world of robotics and Reinforcement Learning (RL), allowing learning with reduced memory usage and improved computational performance. Specifically, we focused on a version of multi-task robotics, where a library of specialist policies are created. In such a library memory efficiency is especially important. We used a Proximal Policy Optimization (PPO) algorithm and fine-tuned a baseline model to different tasks using LoRA. Our results demonstrate that, depending on the hyperparameters, LoRA can minimize memory usage by a factor of 20-160 compared to full fine-tuning of all layers. This implies a 90-95% storage saving when deploying a library of many (10-50) specialized policies, which can be the differentiating factor between being able to store the entire library in memory or having to use swap-memory in an applied robotics setting. At the same time, our results indicate that there is no significant difference in the success-rate between full fine-tuning and LoRA fine-tuning for the selected tasks.

10.
arXiv (CS.CL) 2026-06-25

OPERA: Aligning Open-Ended Reasoning via Objective Perplexity-based Reinforcement Learning

Reinforcement Learning (RL) has enabled LLMs to excel in objective reasoning tasks such as mathematics and code generation. However, applying RL to open-ended tasks, such as creative writing, remains challenging because LLM-as-a-judge reward models often exhibit stylistic biases and positional inconsistencies, leading to unstable supervision. To address this, we propose OPERA (Objective Perplexity-based Reflective Alignment), which replaces unreliable external judges with intrinsic rewards derived from perplexity dynamics. Specifically, we derive an intrinsic reward signal from perplexity dynamics, quantifying uncertainty reduction at critical reflective states. During the cold-start phase, we introduce a data synthesis method that leverages carefully designed guiding words to generate diverse reasoning traces, along with perplexity-prioritized rollouts that utilize internal log-probabilities to identify logically consistent reasoning branches. This pipeline yields a large-scale dataset comprising 20,000 high-quality reasoning trajectories. Empirical evaluations consistently demonstrate the scalability and efficacy of our approach in alignment for open-ended tasks. Implementing OPERA on Qwen3-8B establishes a new state-of-the-art among open-source models, achieving parity with or surpassing proprietary models like Gemini2.5 and MiniMax-M2.5 in some open-ended tasks. The code is available at https://github.com/pangpang-xuan/OPERA.

11.
arXiv (math.PR) 2026-06-25

Gaussian rigidity for infinite exchangeable sequences

arXiv:2606.25976v1 Announce Type: new Abstract: We prove a Gaussian rigidity theorem for infinite exchangeable sequences of real-valued random variables: the joint Gaussianity of a single pair of entries already forces the entire sequence to be a Gaussian process. This settles a conjecture raised by Newman (2026). The main analytic ingredient in the proof is Hardy's uncertainty principle. We also obtain a finite-dimensional vector-valued extension.

12.
arXiv (CS.CV) 2026-06-18

SuperCarver: Texture-Consistent 3D Geometry Super-Resolution for High-Fidelity Surface Detail Generation

Conventional production workflow of high-precision mesh assets necessitates a cumbersome and laborious process of manual sculpting by specialized 3D artists/modelers. The recent years have witnessed remarkable advances in AI-empowered 3D content creation for generating plausible structures and intricate appearances from images or text prompts. However, synthesizing realistic surface details still poses great challenges, and enhancing the geometry fidelity of existing lower-quality 3D meshes (instead of image/text-to-3D generation) remains an open problem. In this paper, we introduce SuperCarver, a 3D geometry super-resolution pipeline for supplementing texture-consistent surface details onto a given coarse mesh. We start by rendering the original textured mesh into the image domain from multiple viewpoints. To achieve detail boosting, we construct a deterministic prior-guided normal diffusion model, which is fine-tuned on a carefully curated dataset of paired detail-lacking and detail-rich normal map renderings. To update mesh surfaces from potentially imperfect normal map predictions, we design a noise-resistant inverse rendering scheme through deformable distance field. Experiments demonstrate that our SuperCarver is capable of generating realistic and expressive surface details depicted by the actual texture appearance, making it a powerful tool to both upgrade historical low-quality 3D assets and reduce the workload of sculpting high-poly meshes.

13.
arXiv (CS.CL) 2026-06-25

Dziri Voicebot: An End-to-End Low-Resource Speech-to-Speech Conversational System for Algerian Dialect

Automatic speech and language technologies are still heavily biased toward high-resource languages, limiting their applicability to dialectal and low-resource settings such as Algerian Dialect. This language presents additional challenges including lack of standardized orthography, frequent codeswitching with French, and scarcity of annotated speech resources. This paper addresses the problem of building a complete speech-to-speech conversational system for Algerian Dialect. We propose a modular pipeline integrating automatic speech recognition, natural language understanding, retrieval-augmented generation, and text-to-speech synthesis within a unified architecture. This work is the continuation of our previous work on Algerian dialectal conversational systems Bechiri and Lanasri [2026], extending it from text-based dialogue modeling to full speech-based interaction. We constructed dedicated datasets for ASR, NLU, and TTS in the telecom domain and fine-tune pretrained models for each component. The ASR system is built on Whisper-based adaptation, while the NLU module combines transformer-based embeddings with a task-oriented dialogue framework. A neural TTS system is trained on a newly collected dialectal corpus to enable spoken response generation. Experimental results show strong performance across all components, including low word error rate for ASR, high intent classification and entity recognition scores for NLU, and stable speech synthesis quality. The proposed system provides a reproducible baseline for end-to-end conversational modeling in Algerian Dialect.

14.
arXiv (CS.CL) 2026-06-11

Which Speech Representation Better Matches Text-Native Reasoning? A Study of Speech-Text Alignment on Frame Rate and Representation

Spoken dialogue models typically start from text LLM backbones, yet reasoning often degrades when conditioning on speech instead of text. We attribute part of this modality gap to a temporal-granularity mismatch: speech tokens are temporally redundant and far longer than text under matched semantics, diluting per-token semantic density and weakening text-native reasoning dynamics. We study speech token design as a representation selection problem and sweep frame rates under a frozen LLM backbone with a fixed information rate. To make low frame rates feasible, we introduce factorized FSQ and a lightweight non-autoregressive audio LM head, scaling capacity to nearly 300\,bits/frame without sacrificing efficient prediction. With the bottleneck removed, we sweep frame rates (50$\rightarrow$2.08\,Hz) and alignment depth, and observe a consistent best regime for speech QA at 4.17\,Hz with intermediate-layer representation alignment.

15.
arXiv (CS.LG) 2026-06-18

A finite-element-inspired bipartite graph learned simulator for manufacturability assessment in large-deformation sheet forming

arXiv:2605.22845v2 Announce Type: replace-cross Abstract: Explicit dynamic finite element (FE) simulations are widely used for large deformation engineering analysis, but repeated simulations remain costly during design space exploration and optimisation. In explicit FE analysis, nodal kinematics and element level deformation measures evolve through coupled node element updates. This motivates graph learned simulators that approximate one step FE state transitions and roll them out autoregressively. However, many mesh based graph surrogates are node centred, which makes element level variables and native nodal elemental exchange less direct to represent. This work proposes CAttBiGNN, a cross attention based bipartite graph neural network for coupled nodal elemental learning. The graph represents FE mesh nodes and elements as distinct entities linked by directed node element edges, enabling nodal displacement increments and element level deformation states to be predicted on their native discretisation domains. An edge aware cross attention processor uses geometric edge embeddings to modulate directional node element message passing. For larger graphs, CAttBiUGNN combines the bipartite processor with graph downsampling and upsampling to improve long-range information propagation. The method is evaluated on dome shaped cold forming and corner shaped hot forming benchmarks. Comparisons with node centred baselines and bipartite and attention ablations show improved accuracy and balance in nodal displacement and elemental thinning prediction during autoregressive rollout. The results indicate that the proposed finite element inspired learned simulator can support manufacturability oriented field prediction and efficient design space exploration in large deformation sheet material forming.

16.
PLOS Medicine 2026-05-29

Availability, appeal, and addictiveness by design: Tobacco and nicotine industry deliberate targeting of youth

by Raglan Maddox, Becky Freeman, Charlotta Pisinger, Emily Banks Contemporary tobacco and nicotine products, particularly e-cigarettes, are deliberately designed, marketed, and distributed to maximize youth appeal, uptake, dependence, and use. Youth uptake is a predictable outcome of systems designed to maximize product availability, appeal, and addictiveness. In recognition of the World No Tobacco Day 2026 theme, "unmasking the appeal", this Perspective by Raglan Maddox and colleagues discusses how tobacco and nicotine products, particularly e-cigarettes, are deliberately designed and marketed to maximize youth appeal, and highlight the need for policies to ensure greater industry accountability and to tackle concerning uptake trends.

17.
arXiv (CS.LG) 2026-06-15

Neither Parallel Nor Sequential: How DiffusionGemma Actually Commits Tokens

arXiv:2606.14620v1 Announce Type: new Abstract: Open diffusion language models are marketed as parallel, non-autoregressive decoders, yet the order in which a shipped checkpoint actually commits its tokens is almost never measured. We instrument DiffusionGemma 26B, a masked discrete-diffusion mixture-of-experts model built on Gemma 4, hooking its sampler's accept step to record which canvas positions commit, when, and at what confidence. Across a 686-prompt, six-regime probe suite we find that its decoding is neither parallel nor block-autoregressive: it follows a partial left-to-right commit bias whose apparent strength depends almost entirely on the granularity at which you look. Order is weak token by token and strengthens smoothly as the analysis is coarsened, so the model's "block size" turns out to be an artifact of the measuring ruler rather than the architecture. The model commits in large simultaneous batches, leaving much of the within-batch order genuinely undefined rather than merely unobserved. The behaviour is regime-dependent: structured JSON is committed in essentially arbitrary order, and a position's commit confidence tracks correctness on mathematical reasoning but carries no signal on factual recall. Commitment is aggressive, finishing in a short late burst well inside the step budget, while task accuracy matches the model's autoregressive Gemma-4 sibling. Beyond these findings, our central contribution is methodological: measuring decoding order honestly demands handling trailing-EOS padding, within-regime confounding, commit non-monotonicity, block-size sensitivity, and large commit-batch ties, each of which can otherwise manufacture a decoding-order result that is not really there.

18.
arXiv (CS.AI) 2026-06-11

LLMs+Graphs: Toward Graph-Native, Synergistic AI Systems

arXiv:2606.11560v1 Announce Type: cross Abstract: Large Language Models (LLMs) have advanced rapidly, but their limitations in structured and multi-hop reasoning underscore the need for graph-native, synergistic artificial intelligence (AI) systems. Graph-structured data underpins critical applications across social, biological, financial, transportation, web, and knowledge domains, making it essential to understand how LLMs can leverage graph computation for grounded, context-rich inference. Three complementary synergies are emerging: LLMs augmented with graph computation for retrieval and reasoning; bidirectional integration between LLMs and knowledge graphs (KGs), where LLMs support KG construction and curation while KGs enforce semantic constraints and factual consistency; and AI agents strengthened by graph algorithms for planning, decision making, and multi-step reasoning. In parallel, LLMs introduce new capabilities for graph data management and graph machine learning (ML) through natural language interfaces and hybrid LLM-graph neural network (GNN) pipelines. This tutorial synthesizes the algorithms, systems, and design principles driving these converging directions, offering data science and data mining researchers a unified perspective on integrating LLMs, graph data management, graph mining, graph ML, and agentic computation into next-generation graph-native AI systems.

19.
medRxiv (Medicine) 2026-06-22

Use of the Pharmacy First service in England in the first 12 months: geographic variation and health system context

Objectives: The Pharmacy First (PF) service was introduced across England from 31 January 2024 to expand the clinical role of community pharmacies and improve access to primary care. This paper describes use of PF in its first 12 months, in terms of uptake, access routes, consultation outcomes, geographic variations, service costs and antimicrobial supply. Methods: A descriptive analysis of all PF consultations submitted for payment to NHS Business Services Authority in England between 31 January 2024 and 31 January 2025. Pharmacy-level consultation data were linked to national data on population, location and pharmacy characteristics. PF use was examined using population-standardised consultation rates and consultations per pharmacy. Results: During the first year of implementation, 2,205,731 PF consultations were recorded as delivered across 11,349 pharmacies, with payment of GBP123 million to pharmacies. Uptake increased steadily over time. Most consultations were for acute sore throat (33%) and uncomplicated urinary tract infection (27%), with corresponding antibiotics, phenoxymethylpenicillin and nitrofurantoin being the most supplied. Most people self-referred (74%) into the service, with 95% of consultations managed without onward referral. Substantial geographic variation was observed. Northern regions had higher use based on the eligible population. The South East and Midlands had higher activity per pharmacy. London showed a distinct pattern, with higher self-referral into the service, lower medication supply and higher referral to other healthcare services. Higher consultation volume was weakly associated with pharmacy characteristics, including opening hours, pharmacy type and retail setting, and local context, in terms of socio-economic and geographic factors. Conclusions: PF had immediate uptake and is operating primarily as a direct-access model for common acute conditions. Findings suggest that PF is contributing to improved access to care and may shift demand away from general practice. However, the service uptake appears to be shaped by geographic location, proximity to other healthcare services and pharmacy characteristics.

20.
arXiv (CS.AI) 2026-06-15

When the Tool Decides: LLM Agents Defer Blindly to Graph Neural Network Tools, and Stronger Backbones Defer More

arXiv:2606.14476v1 Announce Type: new Abstract: A growing line of work equips large language model (LLM) agents with graph neural networks (GNNs) as callable tools, assuming the agent exercises judgment over when and how much to rely on such a tool. We test this directly. We expose a frozen GNN to a ReAct-style LLM agent as an explicit tool and measure, on node classification over a text-attributed graph (ogbn-arxiv, replicated on WikiCS), whether the agent uses the tool or merely obeys it. We find the agent does not exercise judgment: its predictions agree with the raw GNN's 97.6-99.2% of the time (5 seeds), collapsing into a GNN parrot that adopts the tool's output wholesale and bypasses its own reasoning. Sweeping backbone capability (Qwen2.5 0.5B-7B), the deference is not a weak-model artifact: among models able to invoke the tool, agreement rises with capability (0.60 to 0.98 from 1.5B to 7B). Crucially, the cost of deference does not shrink as capability grows and grows where alternatives emerge: a per-node oracle over the available actions beats the parrot by 0.09-0.18 at 3B and 0.12-0.22 at 7B, roughly doubling at high homophily, because the parrot is pinned to the frozen GNN while the agent's alternatives improve; at 7B a simple neighbour-label tool overtakes the GNN at high homophily (0.81 vs 0.71) yet the agent still defers. A simple selective-invocation gate recovers about half of that high-homophily gap (0.71 to 0.83) but yields no net global gain, and held-out estimates bound the best achievable gate over standard test-time features to at most a third of the oracle headroom: reliable selective invocation looks limited by available information, not merely router design. Our results are a cautionary measurement: evaluations of agent+tool systems cannot assume the agent adds judgment on top of the tool, and selective invocation must be designed in rather than expected to emerge from scale.

21.
arXiv (CS.CL) 2026-06-18

VISUALSKILL: Multimodal Skills for Computer-Use Agents

Computer-use agents (CUAs) approach human-level performance on standardised benchmarks but still struggle on long-horizon tasks and unseen software. Existing skill libraries address this with reusable skills, but represent the skill artifact as text only, despite the visual nature of GUI interaction. We propose VISUALSKILL: a hierarchical multimodal skill, tailored to each target application and organised as a central index over per-topic files, which the agent consumes through a load_topic MCP tool that fetches the relevant topic's text and figures on demand. We construct each skill with a two-stage pipeline that combines authored documentation with live-application UI exploration. On two CUA benchmarks, CUA-World and OSExpert-Eval, a Claude Code CLI agent backed by Claude Opus 4.6 reaches an average score of 0.456 with VISUALSKILL, a +15.3 point absolute lift over the no-skill baseline (0.303). Against a matched text-only skill that is generated from the same source content and differs from VISUALSKILL only in modality, VISUALSKILL yields a further +8.3 point absolute gain over the matched text-only skill (0.373 vs. 0.456), providing direct evidence that retaining visual figures in the skill artifact, rather than verbalizing them away, helps the agent both identify UI elements and verify workflow state after each action. Our code is available at https://github.com/XMHZZ2018/VisualSkills.

22.
arXiv (CS.CV) 2026-06-25

SurgAtlas: A Large-Scale Surgical Video-Language Dataset with 2,391 Hours of Open and Minimally Invasive Surgery

We introduce SurgAtlas, the largest surgical video-language dataset to date, comprising 15,291 videos (2,391 hours) spanning 18 surgical specialties and over 5,000 procedure types, sourced entirely from publicly available YouTube content. SurgAtlas is also the first surgical video-language dataset to include open surgery at scale, with 6,182 open procedure videos alongside over 9,000 minimally invasive recordings, and the first to establish standardized benchmarks for open-surgery video understanding. We additionally provide an expert-validated subset with verified visual question-answer pairs across diverse open and minimally invasive procedures, serving as a clinically grounded benchmark for surgical reasoning. Compared with existing surgical video-language datasets, SurgAtlas provides one of the most diverse annotation schemas, combining segment-level captions, step- and phase-level descriptions, video-level surgical descriptions, and reasoning-oriented question-answer pairs organized within a hierarchical taxonomy. These annotations are constructed through an automated multi-tier pipeline with LLM-based enrichment and a staged VQA generation framework with explicit groundedness verification. The scale and diversity of SurgAtlas enable training surgical foundation models with broad procedural coverage: we finetune Qwen3-VL-8B through a two-stage captioning-then-instruction pipeline and achieve competitive or state-of-the-art results on multiple established surgical benchmarks, including phase recognition, triplet detection, and reasoning question answering. More broadly, SurgAtlas provides a large native public video corpus that can support future large-scale pretraining of multimodal surgical AI systems and contribute to the development of next-generation foundation models for surgery.

23.
arXiv (CS.LG) 2026-06-15

Running the Gauntlet: Re-evaluating the Capabilities of Agents Beyond Familiar Environments

arXiv:2606.14397v1 Announce Type: new Abstract: As agentic systems continue to evolve and are widely deployed in real-world scenarios, there is a growing demand to faithfully evaluate their capabilities. However, current benchmarks are typically built on popular applications with relatively simple tasks and focus on a narrow set of capabilities while overlooking broader dimensions, resulting in saturated performance on modern agents and failing to probe their limitations. To this end, we introduce GauntletBench, a web-based benchmark for evaluating agent generalisation in challenging scenarios, focusing on three underexplored capabilities (temporal perception, graphical understanding, and 3D reasoning), across five less-covered professional applications (Video Editor, Workflow Builder, 3D Modeller, Flight Analyser, and Circuit Designer), each with 20 vision-intensive tasks (100 in total). Our benchmark provides a modular pipeline that comprises an environment compatible with both open- and closed-source agent frameworks, a controlled web-based application, a well-structured task suite, and an automated evaluation engine with diverse metrics. Contrary to widespread expectations, our empirical results reveal that frontier agentic systems remain far from achieving human-level performance. Even the state-of-the-art agent achieves only a 19.1% success rate on our GauntletBench, highlighting the limitations in these overlooked capabilities and generalisation. By comparison, non-expert human annotators achieve over 80% success on our challenging yet feasible tasks, revealing the substantial gap between current agent capabilities and those required for complex real-world scenarios.

24.
arXiv (quant-ph) 2026-06-17

Hamiltonian description of nonreciprocal interactions

arXiv:2505.05246v5 Announce Type: replace-cross Abstract: In a vast class of systems, which includes members as diverse as sedimenting particles and bird flocks, interactions do not stem from a potential, and are in general nonreciprocal. Thus, it is not possible to define a conventional energy function, nor to use analytical or numerical tools that rely on it. Here, we overcome these limitations by constructing a Hamiltonian that includes auxiliary degrees of freedom; when subject to a constraint, this Hamiltonian yields the original nonreciprocal dynamics. We show that Glauber dynamics based on the constrained Hamiltonian reproduce both stationary and nonstationary states of the original Langevin dynamics, as we explicitly illustrate for dissipative XY spins with vision-cone interactions. Further, the symplectic structure inherent to our construction enables us to apply the well-developed notions of Hamiltonian engineering, which we demonstrate by varying the amplitude of a periodic drive to tune the spin interactions between those of a square and a chain lattice geometry. Overall, our framework for generic nonreciprocal pairwise interactions paves the way for bringing to bear the full conceptual and methodological power of conventional statistical mechanics and Hamiltonian dynamics to nonreciprocal systems.

25.
arXiv (quant-ph) 2026-06-16

3D Ising criticality with Platonic lattice superconducting qubits

arXiv:2606.16854v1 Announce Type: new Abstract: The three-dimensional (3D) Ising model is a foundational model in statistical physics and critical phenomena, yet its analytical intractability has long impeded the precise determination of universal critical exponents. While high-precision estimates have been obtained through classical numerical methods and conformal bootstrap techniques, a direct quantum simulation of the 3D Ising criticality remains challenging, requiring nontrivial connectivity, sufficient system size, and high spectral resolution. In this work, assisted by the state-operator correspondence of conformal field theory, we perform a digital quantum simulation of the 3D Ising critical exponents using a multiply-connected 9-qubit superconducting quantum processor with a Platonic lattice geometry. Employing an extended variational quantum eigensolver equipped with a phase-based loss function, we variationally prepare the low-energy eigenstates of the transverse-field Ising model on a cubic Platonic lattice encoded in an 8-qubit register. The four lowest eigenenergies are extracted via Fourier-transform analysis and high-precision numerical fitting, agreeing with the exact diagonalization values up to +/- 0.001. The resulting scaling dimension Delta_epsilon = 1.5850 and critical exponent nu = 0.7067 match well with theory.