Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-16

When Do We Need LLMs? A Diagnostic for Language-Driven Bandits

arXiv:2604.05859v2 Announce Type: replace Abstract: We study Contextual Multi-Armed Bandits (CMABs) for non-episodic decision-making problems where the context includes both textual and numerical information (e.g., recommendation systems, dynamic portfolio adjustments, offer selection; all frequent problems in finance). While Large Language Models (LLMs) are increasingly applied to these settings, utilizing LLMs for reasoning at every decision step is computationally expensive, and uncertainty estimates are difficult to obtain. To address this, we introduce LLMP-UCB, a bandit algorithm that derives uncertainty estimates from LLMs via repeated inference. However, our experiments demonstrate that lightweight numerical bandits operating on text embeddings (dense or Matryoshka) match or exceed the accuracy of LLM-based solutions at a fraction of their cost. We further show that embedding dimensionality is a practical lever on the exploration-exploitation balance, enabling cost-performance tradeoffs without prompt complexity. Finally, to guide practitioners, we propose a geometric diagnostic based on the arms' embeddings to decide when to use LLM-driven reasoning versus a lightweight numerical bandit. Our results provide a principled deployment framework for cost-effective, uncertainty-aware decision systems with broad applicability across AI use cases.

02.
arXiv (CS.CL) 2026-06-18

Attention as Frustrated Synchronization

A network of oscillators that synchronizes perfectly computes nothing further, so an attention architecture built from synchronization must locate its computation in structured departures from agreement. We introduce the Frustrated Synchronization Network (FSN), whose token states are phases on a torus and whose entire value pathway is one learned complex coupling kernel over harmonics and a one-step delay. Each component of the kernel is a frustration in the sense of the synchronization literature. The complex phases are static Kuramoto-Sakaguchi frustration angles, the signed harmonics are repulsive Daido components, and the delay term, which couples each token to the successors of the tokens it attends to, is algebraically identical to Kuramoto-Sakaguchi coupling whose frustration angle is the data's own transition, so next-token prediction is implemented as synchronization frustrated by the data. At matched one-million-parameter and training budgets on character-level text and code, the FSN's validation loss is below a tuned RoPE-SwiGLU transformer's at every epoch measured, and the comparison survives training the baseline to convergence: every thirty-epoch enwik8 seed finishes below the transformer's converged fifty-epoch loss of 1.611, and the FSN's completed fifty-epoch runs converge to 1.5953 +/- 0.0014. A variant with every feed-forward block replaced by mean-field coupling to learned collective modes, leaving no multilayer perceptron in the stack, tracks the transformer. On natural text the unfrustrated base layer falls behind the converged transformer at every copy depth, worst on long-range copy events; the kernel reverses the deficit at every depth of four and beyond. Headline comparisons are at the one-million-parameter scale; a scale ladder is complete through four million parameters with the advantage persisting, and remaining arms are marked as in progress.

03.
arXiv (CS.AI) 2026-06-16

Edit Knowledge, Not Just Facts via Multi-Step Reasoning over Background Stories

arXiv:2602.02028v2 Announce Type: replace Abstract: Enabling artificial intelligence systems, particularly large language models, to update knowledge and flexibly apply it during reasoning remains a central challenge. Existing knowledge editing approaches emphasize atomic facts, improving factual recall but often failing to integrate updated information into a coherent framework usable across contexts. In this work, we argue that knowledge update is fundamentally a reasoning problem rather than a memorization problem. Consequently, a model should be trained in situations where the new information is instrumental to solving a task, combined with pre-existing knowledge, and exercised through multi-step reasoning. Based on this insight, we propose a training strategy based on three principles. First, new knowledge is introduced as a coherent background story that contextualizes novel facts and explains their relation to existing knowledge. Second, models are trained using self-generated multi-hop questions that require multi-step reasoning involving the new information. Third, training is done using knowledge distillation, forcing a student model to internalize the teacher's reasoning behavior without access to the novel information. Experiments show that models trained with this strategy effectively leverage newly acquired knowledge during reasoning and achieve remarkable performance on challenging questions that require combining multiple new facts.

04.
arXiv (CS.CV) 2026-06-16

Pantheon360: Taming Digital Twin Generation via 3D-Aware 360{\deg} Video Diffusion

Generating complete digital twins from videos requires precise camera control, global scene coverage, and strict spatial-temporal consistency constraints that remain challenging for perspective video generators due to their limited field of view (FoV). Their narrow FoV forces long or multi-view trajectories, amplifying cross-view inconsistency and temporal drift. We argue that 360{\deg} video generation offers a natural solution: panoramic coverage simplifies trajectory design and provides a strong global context for maintaining coherence. We introduce Pantheon360: Taming Digital Twin Generation via 3D-Aware 360{\deg} Video Diffusion, a controllable 360{\deg} video generation framework that synthesizes high-fidelity videos from sparse 360{\deg} inputs. The key idea is an explicit 3D Cache, reconstructed from the input, which serves as a geometric scaffold for any user-defined camera path. This allows the diffusion model to focus on photorealistic texture refinement while the 3D Cache enforces global geometric consistency. Experiments show that Pantheon360 achieves superior visual quality and unmatched geometric coherence, enabling reliable and flexible 360{\deg} scene generation for downstream simulation and digital-twin applications.

05.
arXiv (CS.AI) 2026-06-19

Structuring and Tokenizing Distributed User Interest Context for Generative Recommendation

arXiv:2606.20554v1 Announce Type: cross Abstract: Generative recommendation is an emerging paradigm that has shown promise in industrial recommendation systems, aiming to predict users' next interactions from their historical behaviors. At the core of generative recommendation lies item tokenization, which bridges item semantics and recommendation models. However, existing methods often struggle to effectively organize and inject complex user-behavioral and item-semantic contexts into recommendation models simultaneously. On the one hand, existing graph-based integration methods, such as graph serialization and graph neural networks, either suffer from scalability issues or exploit only local graph information. On the other hand, existing semantic tokenization methods typically rely on heuristics and lack explicit supervision signals, which may lead to inaccurate or suboptimal semantic representations. To address these limitations in user interest context modeling, we propose G2Rec, a scalable framework that unifies holistic graph-based user co-engagement modeling with semantic tokenization for industrial-scale generative recommendation. Overall, G2Rec enables recommendation models to capture holistic and semantically grounded user interest prototypes without requiring ground-truth user interests, thereby providing more comprehensive and accurate modeling of user behavior contexts in industrial sequential recommendation. Online deployment across product surfaces and extensive experiments on public datasets demonstrate the superiority of G2Rec over existing methods.

06.
arXiv (quant-ph) 2026-06-16

Analyzing Initialization Strategies for the Local Unitary Cluster Jastrow Ansatz within the Quantum-Centric Supercomputing Framework

arXiv:2606.14933v1 Announce Type: cross Abstract: In this study, we analyze the choice of local unitary cluster Jastrow (LUCJ) ansatz initialization and sensitivity of the sample-based quantum diagonalization (SQD) algorithm within the quantum-centric supercomputing (QCSC) framework. We examine six initialization strategies, including those based on coupled-cluster singles and doubles (CCSD), M{\o}ller-Plesset second-order perturbation theory (MP2), data-driven coupled-cluster (DDCC), and trivial (zeroes and random) initializations, across twelve molecular systems and three basis sets (STO-3G, cc-pVDZ, and aug-cc-pVDZ). We find that while the mean absolute percentage errors (MAPEs) between the alternative and CCSD-initialized t2-amplitudes span many orders of magnitude, the resulting SQD energies are largely insensitive to this variation. In particular, most initializations recover energies within chemical accuracy (+/-1.6 mEh) of the CCSD reference, with convergence improving as the basis set size increases. Notably, random initialization achieves performance competitive with CCSD across all basis sets, while zeroes initialization, despite having smaller deviations from CCSD, yields the worst energy agreement. Our results highlight that the proximity to the CCSD initialization is not a reliable predictor of the quality of electronic energies. These findings establish that configuration recovery within SQD, rather than circuit initialization, is the dominant factor governing energy accuracy, and suggest that computationally cheaper initialization strategies are viable alternatives to CCSD for QCSC workflows

07.
arXiv (CS.CL) 2026-06-11

Context-Aware Multimodal Claim Verification in Spoken Dialogues

Every day, millions absorb claims from podcasts and streams that no fact-checker ever sees. Spoken misinformation is built through conversation, where credibility comes not from facts alone but from how claims are framed, reinforced, or left unchallenged across turns. Yet fact-checking has focused on isolated text, leaving dialogue audio under-studied. We introduce MAD2, a new Multi-turn Audio Dialogues benchmark for spoken claim verification, containing 1,000 two-speaker dialogues with 3,368 check-worthy claims and approximately 10 hours of audio, and propose calibrated multimodal fusion of a context-aware audio encoder and a dialogue-aware text model. Across settings, adding dialogue context improves verification, but the gains depend on scenario type. Using only preceding context often matches offline performance, supporting live-moderation settings, and audio contributes most when transcript-based models are destabilized by additional context. Overall, conversational structure matters more for verification than misinformation framing.

08.
arXiv (CS.AI) 2026-06-16

Sustainable Materials Discovery in the Era of Artificial Intelligence

arXiv:2601.21527v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) has transformed materials discovery, enabling rapid exploration of chemical space through generative models and surrogate screening. Yet current generative AI models for materials discovery, which now drive exploration of vast chemical and structural spaces, optimize candidates exclusively for structural stability and functional properties, with no integration of environmental assessment at any stage of the design loop. Prospective and ex-ante life cycle assessment methods exist and have been applied to emerging technologies, but they operate as standalone downstream analyses, not as active constraints within generative or active-learning pipelines. The result is that environmental feedback, even when produced, arrives after design decisions have been made rather than informing them. The disconnect between atomic-scale design and lifecycle assessment (LCA) reflects fundamental challenges: (i) data scarcity across heterogeneous sources, (ii) scale gaps from atoms to industrial systems, (iii) uncertainty in synthesis pathways, and (iv) the absence of frameworks that co-optimize performance with environmental impact. In this Perspective, we propose integrating upstream ML-assisted materials discovery with downstream LCA into the ML-LCA framework, comprising five components: information extraction for building materials-environment knowledge bases, harmonized databases linking properties to sustainability metrics, multi-scale models bridging atomic properties to lifecycle impacts, ensemble prediction of manufacturing pathways with uncertainty quantification, and uncertainty-aware optimization enabling simultaneous performance-sustainability navigation. Case studies spanning polymers, glass, photoresists, and cement demonstrate both necessity and feasibility while identifying material-specific integration challenges.

09.
arXiv (quant-ph) 2026-06-16

Adiabatic preparation of a fractional quantum Hall fluid by coherently pumping atoms from a Bose-Einstein condensate

arXiv:2606.15951v1 Announce Type: cross Abstract: We propose a protocol to adiabatically prepare a many-particle fractional quantum Hall fluid of bosonic ultracold atoms exploiting a time-dependent coherent coupling of a strongly interacting atomic state with a large dilute Bose-Einstein condensate. Starting from an empty cloud, atoms with well-defined angular momentum are coherently pumped into the fluid by Raman beams with a Laguerre-Gauss profile. Compared to number-conserving schemes which rely on finite-size-induced topological gaps, we identify an adiabatic path in the Fock space which avoids crossing topological phase transitions and thus maintains a sizable adiabatic gap open at all times. The efficiency of our preparation protocol is numerically assessed for typical experimental parameters up to particle numbers that largely exceed the experimental state-of-the-art. The crucial advantage of including an anharmonic confinement is finally highlighted.

10.
arXiv (CS.LG) 2026-06-11

Minimal surfaces, Knots, and Neural Networks

arXiv:2605.26234v2 Announce Type: replace-cross Abstract: A recent conjecture by Joel Fine posits a relationship between the coefficients of the HOMFLY polynomial of a knot $K$ in the 3-sphere $S^3$, and the signed count of minimal surfaces in hyperbolic 4-space $\mathrm{H}^4$ meeting the sphere at infinity at $K$, with prescribed genus and self-intersection number. In this paper, we develop a novel machine learning framework based on Physics-Informed Neural Networks (PINNs) to solve the minimal surface equation in hyperbolic space. We utilise this framework to test Fine's Conjecture by constructing near-minimal surfaces bounding various families of knots in $S^3$. Furthermore, we develop an algorithmic method to find self-intersections and compute their sign. For every knot analysed, the computationally discovered minimal surfaces and their self-intersection numbers perfectly align with the predictions of Fine's Conjecture, providing empirical evidence for it.

11.
arXiv (CS.LG) 2026-06-11

PCS-UQ: Uncertainty Quantification via the Predictability-Computability-Stability Framework

arXiv:2505.08784v2 Announce Type: replace-cross Abstract: As machine learning (ML) enters high-stakes domains, trustworthy uncertainty quantification (UQ) is essential for safety. In this paper we introduce PCS-UQ, a framework based on the Predictability, Computability, and Stability (PCS) principles for veridical data science. Starting with a candidate set of models or algorithms, PCS-UQ integrates a rigorous prediction-check to screen out unsuitable models in the set and utilizes bootstrap samples, in order to capture both inter-sample variability and algorithmic instability for the prediction-checked algorithms. We then introduce a novel multiplicative calibration scheme to enhance local adaptivity, which basically corresponds to a new score in conformal prediction. Moreover, we produce a compilation of 17 real-world regression datasets with manually-constructed subgroups. On this benchmark, PCS-UQ maintains the target coverage while outperforming or matching conformal methods equipped with oracle-selected algorithms in interval width. PCS-UQ achieves consistent subgroup coverage, outperforming these oracle-selected conformal methods. Notably, PCS-UQ stands out in achieving both competitive interval widths and consistent subgroup coverage.Across 6 classification datasets, PCS-UQ reduces prediction set sizes by 20\%. To scale the framework for deep learning, we propose computationally efficient variants that bypass expensive retraining. On three computer vision benchmarks, these variants reduce prediction set sizes by 20\% over conformal baselines. Finally, we provide theoretical proof that a modified PCS-UQ algorithm preserves valid coverage under exchangeability as a form of split conformal inference.

12.
arXiv (math.PR) 2026-06-19

A Cycle Walk for Sampling Measures on Spanning Forests for Redistricting

arXiv:2509.08629v2 Announce Type: replace-cross Abstract: We introduce the Cycle Walk, a new Markov chain Monte Carlo method for sampling distributions on balanced graph partitions, motivated by applications in political redistricting. The method operates on spanning forests and combines two types of updates: local "cycle" moves within districts and global moves that exchange population between adjacent districts while preserving balance constraints. This construction enables efficient Metropolis–Hastings correction while allowing proposals at multiple spatial scales. We show that the Cycle Walk naturally interpolates between existing approaches based on local updates and a class of global update methods derived from recombination (RECOM). Through a range of numerical experiments on synthetic graphs and real-world precinct data, we demonstrate that the Cycle Walk exhibits improved empirical convergence diagnostics for distributions that place weaker weight on spanning-tree counts, a regime that is challenging for existing methods. In particular, the algorithm remains effective when incorporating alternative compactness measures that more closely reflect policy-relevant criteria. These results suggest that the Cycle Walk provides a flexible and computationally efficient framework for sampling from a broader class of redistricting distributions than previously accessible with MCMC techniques.

13.
arXiv (CS.AI) 2026-06-16

CoAgent: Concurrency Control for Multi-Agent Systems

arXiv:2606.15376v1 Announce Type: cross Abstract: Multi-agent LLM systems – coding agents, devops agents, document agents – now routinely run several agents in parallel against the same git tree, Kubernetes cluster, or document. As soon as two of them mutate shared state, they enter the regime classical concurrency control has studied for decades, but classical mechanisms fit LLM agents poorly. A single agent transaction spans minutes of inference, read sets are broad and opaque rather than statically inferable, and the live state agents act on admits neither fork nor buffer, so writes take effect the moment they execute. Locks block long inference intervals; OCC abort-and-retry discards minutes of work on every conflict. This paper builds concurrency control on a capability classical transactions lack: the LLM inside each agent can judge whether a conflicting write invalidates its plan, and can repair exactly the operations that depended on it. Control therefore turns advisory: the runtime informs, the agent repairs. Our protocol, MTPO (Monotonic Trajectory Pre-Order), fixes a serialization order at launch, serves each read the order-filtered value, and applies writes speculatively in place; a one-way notification asks an affected reader to re-judge and patch its plan, while the framework mechanically undoes and reorders misplaced writes through the saga-style inverse each tool registers in advance. At quiescence the run is serializable in the pre-decided order. We realize MTPO as CoAgent, toolcall middleware whose privileged ToolSmith grows footprint-declared, undoable tools online. On ten contended workloads, CoAgent stays within 5\% of serial correctness at a $1.4\times$ speedup and near-serial token cost, where 2PL and OCC surrender nearly all concurrency gains; on a bash-only target system, it grows a 25-tool library online and lifts the task pass rate from 45/71 to 63/71 at $0.80\times$ the time and $0.86\times$ the cost.

14.
arXiv (CS.LG) 2026-06-19

Kolmogorov-Arnold Reservoir Computing

arXiv:2606.19984v1 Announce Type: new Abstract: Reservoir computing offers a lightweight framework for forecasting dynamical systems but may struggle to capture long-range dependencies due to limited representational capacity. Conventional reservoir computing recurrently uses trainable reservoirs with hyperparameter sensitivity, while the next-generation reservoir computing removes recurrence at the cost of rapidly growing feature dimensions. Here, we develop Kolmogorov-Arnold Reservoir Computing (KARC), which replaces reservoirs with explicit basis-function expansions inspired by the Kolmogorov-Arnold representation theorem. We rigorously show that KARC is a lightweight design of Kolmogorov-Arnold networks (KANs), preserving the potential expressive capacity of KANs while admitting efficient closed-form training of reservoir computing. At comparable cost, KARC outperforms existing reservoir computing methods on challenging benchmarks including partial differential equations. It can also be integrated with generative diffusion models for text-to-image generation. This work thus establishes a principled bridge between reservoir computing and KANs, enabling efficient and high-fidelity dynamical system forecasting.

15.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

作者:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

16.
arXiv (CS.CV) 2026-06-17

Similarity-based representation factorization for revealing interpretable dimensions in representational data

The study of representations is widespread across fields, including neuroscience, psychology, and artificial intelligence. While representations are often studied and compared through similarities between stimuli, current methods provide only limited access to the dimensions that shape these representations and are often limited in interpretability. To overcome these challenges, here we introduce Similarity-Based Representation Factorization (SRF), a general computational method for recovering low-dimensional, non-negative, interpretable embeddings from similarity matrices derived from measured data. Across simulations and many neural, behavioral, and computational datasets, SRF recovers interpretable dimensions from diverse forms of representational data, even for very sparsely sampled, incomplete data. The dimensions derived from these datasets match those obtained by task-specific models, predict independent behavioral properties, improve exploratory analysis, and offer higher power for confirmatory hypothesis testing than comparing similarity matrices. Together, these results establish SRF as a general-purpose method with broad applications for uncovering, understanding, and using the dimensions underlying representations.

17.
arXiv (CS.LG) 2026-06-18

Exponentially many initializations to avoid barren plateaus

arXiv:2606.18515v1 Announce Type: cross Abstract: Barren plateaus are stated as an average-case phenomenon: pick an ansatz, initialize it naively, and concentration follows. This has led to the common view that a potential cure for barren plateaus is simply to initialize the parameters more carefully. Here we show that the situation is subtler. We introduce a first-moment framework that gives a simple operator-level diagnostic for when an initialization may escape the fully concentrated barren-plateau fixed point, and for comparing the biases induced by different initialization strategies. Our framework recovers several known initialization schemes such as identity and Gaussian initialization, but also shows that barren-plateau avoidance is highly non-unique. Indeed, many shifted, biased, and non-symmetric parameter distributions can avoid concentration, and these choices need not be equivalent. In fact, our results show that one can generate exponentially many families of inequivalent initialization strategies. Then, our numerics indicate that different first-moment-distinct initializations can lead to different attained minima, suggesting that avoiding barren plateaus via smart initializations can trade the exponential concentration problem for the challenge of selecting the right trainable pocket amongst many options.

18.
arXiv (CS.CV) 2026-06-16

VinQA: Visual Elements Interleaved Long-form Answer Generation for Real-World Multimodal Document QA

Real-world documents combine text with tables, charts, photographs, and diagrams arranged in diverse layouts, yet existing research on multimodal large language models (MLLMs) for document QA predominantly produces text-only responses, underutilizing these visual elements. We introduce VinQA, a dataset for long-form answer generation where cited visual elements are explicitly interleaved with their supporting text and grounded in relevant document pages. To support this task, we study two encoding methods for feeding raw document page images into an MLLM, along with their visual-element citation mechanisms: (1) Page Encoding, which directly encodes full-page images with bounding boxes of visual elements and treats these boxed regions as citable units; and (2) Modality Encoding, which parses each page to extract text and crop visual elements, encodes them separately, and uses these cropped elements as citable units. In our experiments, we propose M-GroSE, a multimodal evaluation framework extending GroUSE to assess answers along four dimensions: completeness, answer relevancy, faithfulness, and unanswerability. We additionally report Visual Source F1 to directly measure visual citation accuracy. Although proprietary frontier models still achieve the best overall scores on the VinQA test split, fine-tuning open Qwen2.5-VL models on the training split substantially improves their performance and narrows this gap. Modality Encoding is initially more robust for complex documents with long text, many visual elements, and diverse citation requirements. After training on VinQA, however, Page Encoding reaches a comparable level, competing effectively even without the explicit parsing used in Modality Encoding. Finally, Visual G-Eval, an MLLM-based judge, confirms that fine-tuned models insert visual elements at semantically appropriate positions with faithful supporting text.

19.
arXiv (CS.CV) 2026-06-16

Pixel-TTS: Image based Text Rendering for Robust Text-to-Speech

Recent advances in pixel-based text modeling show that representing text as images enables models to exploit visual cues for language understanding. Grounding text in its visual form allows structurally similar characters with different Unicode encodings to produce similar embeddings, benefiting cross-lingual and zero-shot scenarios. Conventional text-based approaches treat each character independently, limiting generalization to unseen characters and requiring embedding expansion during cross-lingual adaptation. We propose Pixel-TTS, the first framework for visually grounded speech synthesis. It renders text as images and projects them through a 2D convolutional layer to generate embeddings. This design eliminates embedding matrix expansion during fine-tuning while improving robustness to unseen characters and orthographic variations. Extensive experiments show Pixel-TTS achieves competitive performance with strong baselines, faster convergence and robust zero-shot generalization.

20.
medRxiv (Medicine) 2026-06-16

The Target48 Neurodegeneration Panel: A Novel Tool for Profiling Protein Signatures in Neurodegenerative Disorders

Introduction: Novel tools for absolute quantification of established and emerging fluid neuro-biomarkers are required to advance diagnostic studies and improve biological insights. Methods: We conducted an extensive analytical and clinical validation of the Olink Target 48 Neurodegeneration panel (T48 Neuropanel) in 352 paired CSF and plasma samples from cognitively unimpaired controls (CU), Alzheimer dementia (AD), frontotemporal dementia (FTD), and dementia with Lewy bodies (DLB), n=44 per group. Comparisons with benchmark assays were performed. Results: Good detectability (CSF: 31 out of 42 assays; plasma: 38 out of 42 assays) and technical performance was observed. Benchmark assays showed good correlations, supporting method transformation formulas. Next to emerging biomarkers (MMP10, ITGB2), discriminative performance was excellent in AD: CSF pTau217: AUC=1; FTD: plasma NfL: AUC=0.952; and DLB: CSF DDC: AUC=0.901. Discussion: This analytical and clinical validation of the T48 Neuropanel highlights initial cut-offs and emerging biomarkers to aid clinical studies for the diagnosis, prognosis, and monitoring of neurodegenerative diseases. Highlights: The T48 Neuropanel shows robust analytical performance, with high detectability across both plasma and CSF matrices. The T48 Neuropanel validates established (i.e., pTau217, Abeta42, NfL, and GFAP) and emerging biomarkers (i.e., DDC, MMP10, ITGB2, ITGAM, NPTX2, NPTXR, SMOC1, sTREM1, and sTREM2) in CSF and plasma. CSF NfL, GFAP, ITGB2, and ITGAM and plasma GFAP were dysregulated across AD, FTD, and DLB dementias. -The multiplex design of the T48 Neuropanel enables rich biological interpretation by simultaneously quantifying established and emerging neurodegeneration biomarkers. Importantly, the inclusion of absolute quantification facilitates the establishment of cut-offs, supporting its potential for clinical translation.

21.
arXiv (CS.AI) 2026-06-18

InstructTime++: Time Series Classification with Multimodal Language Modeling via Implicit Feature Enhancement

arXiv:2601.14968v2 Announce Type: replace-cross Abstract: Most existing time series classification methods adopt a discriminative paradigm that maps input sequences directly to one-hot encoded class labels. While effective, this paradigm struggles to incorporate contextual features and fails to capture semantic relationships among classes. To address these limitations, we propose InstructTime, a novel framework that reformulates time series classification as a multimodal generative task. Specifically, continuous numerical sequences, contextual textual features, and task instructions are treated as multimodal inputs, while class labels are generated as textual outputs by tuned language models. To bridge the modality gap, InstructTime introduces a time series discretization module that converts continuous sequences into discrete temporal tokens, together with an alignment projection layer and a generative self-supervised pre-training strategy to enhance cross-modal representation alignment. Building upon this framework, we further propose InstructTime++, which extends InstructTime by incorporating implicit feature modeling to compensate for the limited inductive bias of language models. InstructTime++ leverages specialized toolkits to mine informative implicit patterns from raw time series and contextual inputs, including statistical feature extraction and vision-language-based image captioning, and translates them into textual descriptions for seamless integration. Extensive experiments on multiple benchmark datasets demonstrate the superior performance of InstructTime++.

22.
arXiv (CS.CV) 2026-06-16

MoECa: Aligning Feature Reuse with Expert Decomposition in Diffusion Transformers

Diffusion Transformers with Mixture-of-Experts (DiT-MoE) improve model capacity under sparse activation, but diffusion inference is still bottlenecked by redundant computation across timesteps. Existing caching methods mainly operate at the token level, which becomes suboptimal in DiT-MoE because each token update is internally decomposed into multiple routed expert branches. Our analysis shows that cross-timestep redundancy in DiT-MoE is better characterized at the expert-branch level than at the whole-token level. Based on this observation, we propose MoECa, a fine-grained caching framework that performs branch-level feature reuse across timesteps. MoECa further introduces expert-aware adaptive control and synchronized cache updates across MoE and attention paths to maintain stable intermediate states. Experiments on multiple DiT-MoE models show that MoECa consistently achieves a better speed-quality trade-off than prior caching methods, with up to 2.83$\times$ inference speedup and minimal quality degradation.

23.
arXiv (CS.AI) 2026-06-19

Leveraging systems' non-linearity to tackle the scarcity of data in the design of Intelligent Fault Diagnosis Systems

arXiv:2606.20323v1 Announce Type: new Abstract: Deep Transfer Learning (DTL) allows for the efficient building of Intelligent Fault Diagnosis Systems (IFDS). On the other hand, DTL methods still heavily rely on large amounts of labelled data. Obtaining such an amount of data can be challenging when dealing with machines or structures faults. This document proposes a novel approach to the design of vibration-based IFDS using DTL in condition of strong data scarcity. A periodic multi-excitation level procedure leveraging intrinsic non-linearities of real-world systems is used to produce images that can be conveniently analysed by pre-trained Convolutional Neural Networks (CNNs) to diagnose faults. A new data visualization method and its augmentation technique are proposed in this paper to tackle the typical lack of data encountered during the design of IFDS. Experimental validation on a railway pantograph structure provides effective support for the proposed method.

24.
arXiv (CS.AI) 2026-06-16

Mind-Studio: Executable World Models with Lookahead Evaluation for Partially Observable Games

arXiv:2606.16070v1 Announce Type: new Abstract: World-model synthesis aims to turn interaction experience into an internal model of environment dynamics. Existing symbolic approaches often fit observed transitions or mixtures of local rules, but they do not produce a complete executable program that can run independently of the real environment. We present Mind-Studio, a framework that synthesizes executable pygame-style world models from state-action-next-state trajectories using large language models. Mind-Studio combines entropy-selected traces with a lightweight game skill file containing object, action, and static scene information extracted from screenshots. We evaluate synthesis quality with a K-step lookahead fidelity protocol that compares generated world-model rollouts against Real-ALE rollouts from the same state. On Montezuma's Revenge, Mind-Studio improves chosen-action next-state prediction from 0.3% for PoE-World to 48.7% while verifying 5 of 8 subgoals; across Alien, Assault, and Skiing, it achieves stronger branch-level fidelity than prior learned lookahead sources.

25.
arXiv (quant-ph) 2026-06-17

Quantum-HPC Software Stacks and the openQSE Reference Architecture: A Survey

arXiv:2604.20912v2 Announce Type: replace Abstract: Quantum resources are increasingly integrated into high-performance computing (HPC) and cloud environments, but quantum high-performance computing (QHPC) software stacks remain isolated, often proprietary, full-stack solutions lacking common interfaces across runtime, resource management, orchestration, and execution layers. This paper analyzes nine production QHPC stacks and identifies common design patterns and emerging requirements, covering deployment models, application interaction patterns, SDK support, and readiness for fault-tolerant operation. The survey exposes consistent needs in runtime abstraction, resource management, interconnect semantics, and observability. Based on these findings, we propose the open quantum-HPC software ecosystem ( openQSE) reference architecture as a first step toward unifying the state-of-the-practice. openQSE defines a set of layer boundaries that allow different implementations to interoperate while preserving deployment flexibility, and is structured to support both current noisy intermediate-scale quantum (NISQ) workloads and future fault-tolerant quantum computing (FTQC) systems without changes to upper-layer application interfaces.