Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-16

Towards Quantum Limited Spatial Resolution of NV-Diamond Magnetometry

arXiv:2508.13438v2 Announce Type: replace Abstract: Optically addressable ensembles of solid-state defects, such as nitrogen vacancy (NV) centers, are a leading modality for imaging-based magnetometry, thermometry and strain sensing. However, monitoring the fluorescence of individual defects within a sub-diffraction ensemble remains an outstanding challenge that currently limits access to atomic-scale features and dynamics. For compact clusters of NVs, we formulate imaging-based atomic sensing as a low-dimensional multiparameter estimation task in which one seeks to localize each defect and quantify the field strength in its immediate vicinity. In this work, we employ optical spatial mode demultiplexing (SPADE) to enhance localization and brightness estimation accuracy at sub-diffraction scales. Specifically, we develop a two-stage sensing protocol that augments direct imaging by projecting the incoming optical field onto point spread function (PSF)-adapted, i.e., PAD spatial modes and Yuen-Kennedy-Lax (YKL) spatial modes enabling efficient extraction of emitter positions and brightnesses. The YKL-SPADE measurement employed for brightness estimation is shown to be quantum-optimal in the case of two emitters and establishes a new connection between quantum detection and estimation theories. We numerically evaluate the statistical performance of our protocol for sub-diffraction optically detected magnetic resonance (ODMR) and Rabi sensing experiments. Compared to conventional focal plane intensity measurements, our protocol improves emitter localization accuracy by 6$\times$ and brightness estimation accuracy by 2$\times$ for tightly confined ensembles, residing well below the diffraction limit.

03.
medRxiv (Medicine) 2026-06-16

Sleep regularity outweighs sleep duration as a predictor of disease

Sleep regularity, the consistency of sleep-wake timing from one day to the next, is more strongly associated with longevity than adequate sleep duration. Whether this relationship persists across common diseases is unknown. We compared sleep regularity vs. sleep duration as risk factors for 199 diseases and disorders, using ten million hours of objective sleep-wake data (N=60,998, age[mean{+/-}SD]=62.8{+/-}7.8, 55% female). Multivariable-adjusted risks of incident diseases/disorders for regular/irregular and short/adequate sleepers were compared across 9.5 years of follow-up. Irregular sleep predicted risks for 131 diseases/disorders, more than double the number predicted by short sleep duration (63). Irregular sleep was a superior predictor than short sleep duration for 90 diseases/disorders, including circulatory, metabolic, digestive, renal, infectious, neurological, and musculoskeletal conditions, and mental disorders, whereas short sleep duration was the superior predictor for only 9 diseases/disorders. For models where short sleep duration explained disease risks, 83% were improved by adding sleep regularity. Sleep regularity was a stronger predictor of diseases/disorders than sleep duration in this cohort and should be considered an essential dimension of sleep health.

04.
arXiv (CS.LG) 2026-06-16

A Fully First-Order Layer for Differentiable Optimization

arXiv:2512.02494v2 Announce Type: replace Abstract: Differentiable optimization layers enable learning systems to make decisions by solving embedded optimization problems. However, computing gradients via implicit differentiation requires solving a linear system with Hessian terms, which is both compute- and memory-intensive. To address this challenge, we propose a novel algorithm that computes the gradient using only first-order information. The key insight is to rewrite the differentiable optimization as a bilevel optimization problem and leverage recent advances in bilevel methods. Specifically, we introduce an active-set Lagrangian hypergradient oracle that avoids Hessian evaluations and provides finite-time, non-asymptotic approximation guarantees. We show that an approximate hypergradient can be computed using only first-order information in $\tilde{O}(1)$ time, leading to an overall complexity of $\tilde{O}(\delta^{-1}\epsilon^{-3})$ for constrained bilevel optimization, which matches the best known rate for non-smooth non-convex optimization. Furthermore, we release an open-source Python library that can be easily adapted from existing solvers. The source code is available at https://github.com/guaguakai/FFOLayer.

05.
arXiv (CS.CV) 2026-06-24

Beyond a Single Light: A Large-Scale Aerial Dataset for Urban Scene Reconstruction Under Varying Illumination

Recent advances in Neural Radiance Fields and 3D Gaussian Splatting have demonstrated strong potential for large-scale UAV-based 3D reconstruction tasks by fitting the appearance of images. However, real-world large-scale captures are often based on multi-temporal data capture, where illumination inconsistencies across different times of day can significantly lead to color artifacts, geometric inaccuracies, and inconsistent appearance. Due to the lack of UAV datasets that systematically capture the same areas under varying illumination conditions, this challenge remains largely underexplored. To fill this gap, we introduceSkyLume, a large-scale, real-world UAV dataset specifically designed for studying illumination robust 3D reconstruction in urban scene modeling: (1) We collect data from 10 urban regions data comprising more than 100k high resolution UAV images (four oblique views and nadir), where each region is captured at three periods of the day to systematically isolate illumination changes. (2) To support precise evaluation of geometry and appearance, we provide per-scene LiDAR scans and accurate 3D ground-truth for assessing depth, surface normals, and reconstruction quality under varying illumination. (3) For the inverse rendering task, we introduce the Temporal Consistency Coefficient (TCC), a metric that measuress cross-time albedo stability and directly evaluates the robustness of the disentanglement of light and material. We aim for this resource to serve as a foundation that advances research and real-world evaluation in large-scale inverse rendering, geometry reconstruction, and novel view synthesis.

06.
arXiv (CS.LG) 2026-06-18

Predicting the Neutrino Mass Ordering Using Neural Networks

arXiv:2606.03745v1 Announce Type: cross Abstract: Determining the neutrino mass ordering remains a central open problem in particle physics. While next-generation long-baseline experiments are expected to resolve this question, current data provide limited sensitivity because the spectral differences between normal and inverted ordering are subtle and entangled with parameter degeneracies. We investigate a machine-learning strategy for mass-ordering determination using a feed-forward neural-network classifier trained on synthetic long-baseline datasets generated with three-flavour oscillation probabilities, matter effects, and statistical fluctuations. We evaluate the classifier against standard $\chi^2$ and $\log\mathcal{L}$ approaches using common discrimination metrics, including receiver-operating-characteristic curves, to quantify sensitivity and to illustrate how operating points can be selected to prioritise purity or efficiency. We find that the neural network achieves performance comparable to conventional fits for the scenarios studied, providing a flexible, independent cross-check of established analyses. The framework can be extended to incorporate systematic uncertainties and to explore joint inference of oscillation parameters, and it may also serve as a pedagogical tool for introducing machine-learning methods in neutrino physics.

07.
arXiv (CS.AI) 2026-06-17

Functional Equivalence in Attention: A Comprehensive Study with Applications to Linear Mode Connectivity

arXiv:2606.17830v1 Announce Type: cross Abstract: Neural network parameter spaces are inherently non-injective, as distinct parameter configurations can realize identical functions through functional equivalence. While this symmetry is well understood in classical fully connected and convolutional models, it becomes substantially more intricate in modern attention-based architectures. Existing analyses of multihead attention have largely focused on the vanilla formulation, overlooking positional encodings that fundamentally reshape architectural symmetries. In this work, we provide a formal study of functional equivalence in Transformers with positional encodings. Focusing on the two most widely used variants–sinusoidal and rotary positional encodings (RoPE)–we show that sinusoidal encodings preserve the equivalence structure of vanilla attention, whereas rotary encodings significantly reduce the symmetry group, thereby enhancing expressivity. This offers a principled explanation for the growing prominence of RoPE in practice. We further examine how positional encodings affect linear mode connectivity, and through an alignment algorithm, empirically demonstrate that the presence and variability of connectivity across Transformer settings crucially depend on the positional encoding.

08.
arXiv (CS.AI) 2026-06-15

Expert-Driven Survival Machines: Improving Stratification and Interpretability in Multiple Clinical Cohorts

arXiv:2606.14608v1 Announce Type: cross Abstract: Survival prediction plays a central role for healthcare providers and clinical researchers. Accurate risk stratification enables early intervention and improved patient management. Most existing deep survival models learn one common feature representation for all patients, which may hide important differences between patient subgroups. In contrast, a Mixture-of-Experts (MoE) framework allows different parts of the model to focus on different patient patterns, leading to more individualized representations. Therefore, in this work, we propose a mixture-of-experts enhanced adaptive deep clustering survival framework (AdaCSM) for modeling such heterogeneous survival patterns. We introduce a routing-based expert mechanism that enables conditional specialization within a parametric survival modeling framework. The proposed architecture allocates patients to specialized risk predictors dynamically while preserving the patient survival and subtype clustering objectives. We compare our method with state-of-the-art survival and deep clustering models on multiple real-world longitudinal clinical cohorts spanning diverse disease domains. The proposed method demonstrates improved predictive performance and leads to interpretable results in survival analysis.

09.
arXiv (CS.LG) 2026-06-16

From Tokens to Policy: Causal and Interpretable Heterogeneous Treatment Effects Identification

arXiv:2606.17010v1 Announce Type: new Abstract: Heterogeneous Treatment Effect (HTE) identification is crucial to explain the impact of an intervention and optimize our policies accordingly. Existing approaches trade expressivity for interpretability, but, if some active heterogeneity drivers are unmeasured, methods at both ends of this spectrum allow for spurious HTE characterization with no causal reading. In this work, we focus on controlled experiments and argue that an oracle HTE causal characterization via the latent interactors is now within reach, thanks to (i) more extensive pre-treatment measurements, i.e., multi-modal and multi-view, and (ii) scalable representations with minimal human supervision. We then re-frame HTE identification as a Markov-blanket discovery problem on a sufficient and aligned pre-treatment representation, and introduce Neural EXposure Interaction Search (NEXIS), an iterative procedure with provable and empirically validated consistent selection. We deploy NEXIS on two anti-poverty programs in Africa, augmenting each with satellite imagery capturing previously unmeasured environmental effect modifiers, leading to novel, interpretable and prescriptive guidelines to optimize the programs' next iterations.

10.
arXiv (CS.CL) 2026-06-12

EurekAgent: Agent Environment Engineering is All You Need For Autonomous Scientific Discovery

LLM-based agents have shown increasing potential in automating scientific discovery. Given an optimizable metric and an execution environment, they can propose, validate, and iterate scientific solutions, and have produced results that outperform human-designed approaches. As model capabilities continue to improve, we argue that the bottleneck for autonomous scientific discovery is shifting from prescribing agent workflows to designing agent environments: the resources, constraints, and interfaces that shape agent behavior. We frame this as environment engineering: building environments that amplify productive behaviors, such as open-ended exploration, systematic artifact management, and inter-agent collaboration, while suppressing harmful behaviors, such as reward hacking and high-friction human oversight. We present EurekAgent, an environment-engineered agent system for metric-driven autonomous scientific discovery. EurekAgent engineers the environment along four dimensions: permissions engineering for bounded agent execution and isolated evaluation; artifact engineering for filesystem and Git-based collaboration; budget engineering for budget-aware exploration; and human-in-the-loop engineering for easy human supervision and intervention. EurekAgent sets new state-of-the-art results on multiple mathematics, kernel engineering, and machine learning tasks, including new state-of-the-art 26-circle packing results discovered with less than $11 in total API cost. We open-source our code and results, and call for environment engineering as a core research direction for developing reliable autonomous research agents.

11.
arXiv (CS.CV) 2026-06-16

ReportQA: QA-Based Radiology Report Evaluation

Radiology report evaluation is essential for advancing automated report generation. Natural language generation metrics have limited clinical relevance. Clinical efficacy (CE) metrics evaluate important medical findings, but focus mainly on presence and cover only a limited set of entities. Due to heavy reliance on manual annotations, it is difficult for CE metrics to extend clinical entities or attributes. In clinical practice, radiology reports serve as a medium for information transfer. Clinicians use them to perform downstream diagnostic tasks without directly inspecting images. Based on this insight, we propose ReportQA, a clinical-related and flexible radiology report evaluation framework, supporting detailed quantitative analysis of radiology report generation systems. We first collect datasets covering multiple imaging modalities and anatomical regions. We then construct knowledge trees of clinical entities and attributes with radiologist guidance, and use large language models (LLMs) to extract structured information from raw reports. Next, we generate QA pairs from predefined templates and apply quality control through self-filtering and report-based filtering. During evaluation, the report is treated as context, and an LLM acts as a judge model to answer the QA pairs. Based on the resulting QA accuracy, we introduce QAScore metric. Compared with existing metrics, QAScore shows better alignment with radiologist judgments. Experiments on multiple state-of-the-art vision-language models reveal that current report-based inference paradigms struggle to learn fine-grained clinical representations and exhibit strong negative prior biases. In contrast, question-driven inference provides a more effective alternative. For reproducibility and extensibility, we release the knowledge trees, structured reports, and QA pairs, along with the pipeline code for QA construction and evaluation.

12.
arXiv (CS.CL) 2026-06-11

Toward Generalist Autonomous Research via Hypothesis-Tree Refinement

Scientific progress depends on a repeated loop of exploration, experimentation, and abstraction. Researchers test candidate directions, interpret the evidence, and carry the resulting lessons into later attempts. We study how an AI agent can run this loop autonomously over long horizons. We introduce Arbor, a general framework for autonomous research that combines a long-lived coordinator, short-lived executors, and Hypothesis Tree Refinement (HTR), a persistent tree that links hypotheses, artifacts, evidence, and distilled insights across time. The coordinator manages global research strategy over the tree, while executors implement and test individual hypotheses in isolated worktrees. As results return, Arbor updates the tree, propagates reusable lessons, refines the search frontier, and admits verified improvements. This design turns autonomous research from a sequence of local attempts into a cumulative process in which strategy, execution, and evidence are carried across time. We evaluate Arbor under Autonomous Optimization (AO), an operational setting where an agent improves an initial research artifact through iterative experimentation without step-level human supervision. Across six real research tasks in model training, harness engineering, and data synthesis, Arbor achieves the best held-out result on all six tasks, attaining more than 2.5x the average relative held-out gain of Codex and Claude Code under the same task interface and resource budget. On MLE-Bench Lite, Arbor reaches 86.36% Any Medal with GPT-5.5, the strongest result in our comparison.

13.
bioRxiv (Bioinfo) 2026-06-16

AutoZyme: An Autonomous Agentic Framework to Optimize Bioinformatics Software

Performance bottlenecks in widely used genomics and bioinformatics software present a substantial and growing burden as biological datasets continue to increase in size and number. Relieving these bottlenecks relies largely on expert manual optimization and therefore remains difficult to scale. Here we present AutoZyme, an agentic framework for scientific software optimization. Given a target function, AutoZyme builds benchmarks, identifies bottlenecks, and iteratively tests code changes, retaining only those that improve runtime while preserving output. We evaluated AutoZyme on 45 functions, improving runtime without substantial memory increases in over 95% of cases considered. Across 38 functions from Seurat, Scanpy and related packages in genomics and bioinformatics, AutoZyme reduced runtime by a median of 8.52-fold, with the largest reductions exceeding 676-fold. The optimized functions are distributed through AutoZyme-Library as drop-in replacements for existing analysis pipelines. We also release AutoZyme as a reusable framework for optimizing additional user-specified packages and functions.

14.
arXiv (CS.CL) 2026-06-16

DRA-GRPO: Your GRPO Needs to Know Diverse Reasoning Paths for Mathematical Reasoning

Post-training LLMs with Reinforcement Learning, specifically Group Relative Policy Optimization (GRPO), has emerged as a paradigm for enhancing mathematical reasoning. However, standard GRPO relies on scalar correctness rewards that are often non-injective with respect to semantic content: distinct reasoning paths receive identical rewards. This leads to a Diversity-Quality Inconsistency, where the policy collapses into a narrow set of dominant modes while ignoring equally valid but structurally novel strategies. To bridge this gap, we propose Diversity-aware Reward Adjustment (DRA), a theoretically grounded framework that calibrates the reward signal using the semantic density of sampled groups. By leveraging Submodular Mutual Information (SMI), DRA implements an Inverse Propensity Scoring (IPS) mechanism that effectively de-biases the gradient estimation. This creates a repulsive force against redundancy, driving the policy to achieve better coverage of the high-reward landscape. Our method is plug-and-play and integrates seamlessly with GRPO variants. Empirical evaluations on five math benchmarks demonstrate that DRA-GRPO consistently outperforms strong baselines, achieving an average accuracy of 58.2% on DeepSeek-R1-Distill-Qwen-1.5B with only 7,000 training samples and $55 cost, highlighting the critical role of diversity calibration in data-efficient alignment. The code is available at https://github.com/xiwenc1/DRA-GRPO.

15.
arXiv (CS.AI) 2026-06-11

Automating Geometry-Intensive Compliance Checking in BIM: Graph-Based Semantic Reasoning Framework

arXiv:2606.12065v1 Announce Type: new Abstract: Automating compliance check for geometry-intensive regulations remains a significant technical bottleneck in Building Information Modeling (BIM), primarily due to the semantic disparity between high-level regulatory logic and structured IFC data. Existing methods, often reliant on static rule templates, struggle to traverse multi-hop reasoning chains or resolve latent spatial dependencies across multiple building entities. To address these challenges, a Spatial-Geometric Reasoning System for Building Information Modeling (SGR-BIM) is proposed as an integrative graph-driven reasoning framework. SGR-BIM dynamically constructs a cross-modal knowledge graph that aligns user intent, regulatory semantics, and BIM geometry, enabling interpretable reasoning without rigid hard-coding. Validated on 679 expert-verified queries from fire safety codes, the framework achieves 84.3% accuracy, representing an 8.6% improvement over enhanced-tool single-agent baselines. This research provides a graph-based semantic reasoning paradigm, enhancing the transparency and flexibility of automated geometric compliance check workflows in the Architecture, Engineering, and Construction (AEC) industry.

16.
arXiv (CS.CV) 2026-06-24

Autonomous Video Generation with Counterfactual Controllability for Self-Evolving World Models

Existing literature claims that video generation essentially is world modelling. On the one hand, the claim is productive because it pushes generative AI beyond static images and toward temporally extended physical scenes. On the other hand, this claim dangerously relies on the belief that scaling visual prediction alone will automatically yield physical agents. We prefer a more accurate statement: video generation models learn a partial, implicit spatiotemporal world model, but not a fully grounded or controllable one. The reason is as follows: a model may generate a plausible video of a drone crossing a forest or a robot arm manipulating a cup, yet still fail to know which variables are controllable, which constraints belong to a particular body and which futures remain valid under intervention. The frontier in essence is not predictive realism alone, instead it emphasizes a self-evolving generative nature that requires the decisive criterion to be counterfactual controllability: the capability of asking what would happen under an action, to test whether the generated future can survive embodiment constraints and to feed the resulting action knowledge back into future imagination (generation). Therefore, in this paper we present a new perspective, i.e., autonomous video generation with counterfactual controllability is one promising way to realize self-evolving world models.

17.
arXiv (CS.LG) 2026-06-11

DeepRHP: A Hybrid Variational Autoencoder for Designing Random Heteropolymers as Protein Mimics

arXiv:2606.11651v1 Announce Type: new Abstract: Synthetic random heteropolymers (RHPs), consisting of a predefined set of monomers, offer an approach toward the design of protein-like materials. These RHPs, if designed appropriately, can mimic protein behavior and function. As such, there is a need for computational tools to efficiently guide RHP design. We bridge this gap by developing DeepRHP, a modified variational autoencoder (VAE) model under a semi-supervised framework. By equipping a classical VAE with an additional feature-based VAE, DeepRHP forces the latent space to capture structures of critical chemical features as well as individual RHP sequence patterns. In this sense, our method is versatile by allowing any relevant features to be incorporated in a hybrid manner. We demonstrate the effectiveness of DeepRHP by suggesting potential monomer compositions that stabilize membrane proteins (e.g. Aquaporin Z) in non-native environments and cross-validating our prediction with published results. The concordance between our model and true RHP function suggests strong potential in utilizing hybrid autoencoder architectures to guide RHP design for proteins and other biological compounds.

18.
PLOS Computational Biology 2026-06-22

pyhgf: A neural network library for predictive coding

by Nicolas Legrand, Lilian Weber, Peter Thestrup Waade, Anna Hedvig Møller Daugaard, Mojtaba Khodadadi, Nace Mikuš, Christoph Mathys Bayesian models of cognition have gained considerable traction in computational neuroscience and psychiatry. Their scopes are now expected to expand rapidly to artificial intelligence, providing general inference frameworks to support embodied, adaptable, and energy-efficient autonomous agents. A central theory in this domain is predictive coding, which posits that learning and behaviour are driven by hierarchical probabilistic inferences about the causes of sensory inputs. Biological realism constrains these networks to rely on simple local computations in the form of precision-weighted predictions and prediction errors. This can make this framework highly efficient, but its implementation comes with unique challenges on the software development side. Embedding such models in standard neural network libraries often becomes limiting, as these libraries’ compilation and differentiation backends can force a conceptual separation between optimization algorithms and the systems being optimized. This critically departs from other biological principles such as self-monitoring, self-organisation, cellular growth, and functional plasticity. In this paper, we introduce pyhgf: a Python package backed by JAX and Rust for creating, manipulating, and sampling dynamic networks for predictive coding. We improve over other frameworks by enclosing the network components as transparent, modular, and malleable variables in the message-passing steps. The resulting graphs can implement arbitrary algorithms as belief propagation. Moreover, the transparency of core variables can also translate into inference processes that leverage self-organisation principles and express structure learning, meta-learning, or causal discovery as the consequence of network structural adaptation to surprising inputs. The main functions of the library are differentiable and seamlessly integrate into sampling or optimization workflows. Additionally, we offer generalized Bayesian filtering and the hierarchical Gaussian filter as key examples of dynamic networks implemented in our library. The source code, tutorials, and documentation are hosted under the main repository at https://github.com/ComputationalPsychiatry/pyhgf.

19.
arXiv (quant-ph) 2026-06-11

Towards the implementation of a quantum classifier

arXiv:2606.10150v2 Announce Type: replace Abstract: In this work, we investigate the use of a quantum circuit as a binary classification model in the context of quantum machine learning. We call this model, binary quantum classifier. First, we describe fundamental concepts of quantum computing and introduce the computational tool used: Qibo, an open-source framework for efficient quantum simulations and quantum hardware control. Then, we describe how to design a binary quantum classifier for the classification of images and small arrays of variables by showing how to input data in the circuit, defining a quantum circuit model Ansatz with trainable parameters and a loss function, and implementing multiple minimizers. We test our quantum classifier with two data sets. The first one is the MNIST data set which is composed of handwritten digits (reduced to only handwritten zeros and handwritten ones for binary classification). We study the behavior of different minimizers by increasing the number of layers of the Ansatz. The second data set represents two different high energy collisions that can occur at colliders such as LHC (CERN). Due to in-time proton-proton interactions known as pile-up, we distinguish two different data sets: "without pile-up" and "with pile-up". These collisions can be represented by images of size 32x32 or by six high-level variables that we call features. By increasing the size of the training data set and the number of layers of the Ansatz, we search for the best minimizer. Splitting the data set in training set and test set, we compute: ROC curve, AUC score, confusion matrices and test set accuracy. For "with pile-up" images, we compare the results obtained with the quantum classifier with a small convolutional neural network. We conclude that is possible to build a binary quantum classifier with a quantum circuit and we highlight its performances and limitations in comparison with classical technologies.

20.
Nature (Science) 2026-06-10

Mitochondria tethered to the nucleus secure its energy supply

Direct interactions between the cell’s powerhouses and nuclear pores might channel energy straight into the nucleus, fuelling cell division and differentiation. Direct interactions between the cell’s powerhouses and nuclear pores might channel energy straight into the nucleus, fuelling cell division and differentiation.

21.
arXiv (CS.AI) 2026-06-17

SkillJect: Effectively Automating Skill-Based Prompt Injection for Skill-Enabled Agents

arXiv:2602.14211v3 Announce Type: replace-cross Abstract: Agent skills extend LLM agents with task-specific instructions, executable scripts, and auxiliary resources, improving reusability but creating a new supply-chain attack surface. A malicious or compromised skill can be repeatedly loaded as trusted guidance and steer downstream tool use. Existing skill-based prompt-injection attacks are often manual and brittle, because explicit malicious instructions are rejected or ignored when they are not aligned with the original workflow. We propose SkillJect, the first automated framework for generating poisoned skills against skill-enabled agent systems. SkillJect uses two coordinated channels. In the artifact channel, it hides the payload inside an auxiliary helper script. In the instruction channel, it rewrites SKILL.md with a front-loaded inducement strategy, placing injected content at the beginning and framing the helper script as a mandatory prerequisite or initialization step. The rewritten instruction explicitly references the helper-script path and provides an executable example command, making the helper appear to be a legitimate setup step before normal skill operations. SkillJect further adopts a closed-loop multi-agent process to improve attack effectiveness. An Attack Agent generates poisoned skills, a Victim Agent executes downstream tasks with the poisoned skill, and an Evaluate Agent inspects execution traces to determine whether the hidden payload was executed. The Attack Agent then uses this feedback to diagnose failure causes and rewrite SKILL.md, while keeping the payload fixed. Experiments across skill-enabled platforms, backend LLMs, and attack categories show that SkillJect substantially outperforms naive direct injection and prior manual skill-injection attacks, highlighting poisoned skills as a persistent threat in reusable skill ecosystems.

22.
arXiv (CS.AI) 2026-06-17

Brep2Shape: Boundary and Shape Representation Alignment via Self-Supervised Transformers

arXiv:2602.07429v2 Announce Type: replace-cross Abstract: Boundary representation (B-rep) is the industry standard for computer-aided design (CAD). While deep learning shows promise in processing B-rep models, existing methods suffer from a representation gap: continuous approaches offer analytical precision but are visually abstract, whereas discrete methods provide intuitive clarity at the expense of geometric precision. To bridge this gap, we introduce Brep2Shape, a novel self-supervised pre-training method designed to align abstract boundary representations with intuitive shape representations. Our method employs a geometry-aware task where the model learns to predict dense spatial points from parametric Bézier control points, enabling the network to better understand physical manifolds derived from abstract coefficients. To enhance this alignment, we propose a Dual Transformer backbone with parallel streams that independently encode surface and curve tokens to capture their distinct geometric properties. Moreover, the topology attention is integrated to model the interdependencies between surfaces and curves, thereby maintaining topological consistency. Experimental results demonstrate that Brep2Shape offers significant scalability, achieving state-of-the-art accuracy and faster convergence across various downstream tasks.Code is available at this repository: https://github.com/thuml/Brep2Shape.

23.
arXiv (math.PR) 2026-06-15

Limiting partition function for the Mallows model: a conjecture and partial evidence

作者:

arXiv:2406.18855v2 Announce Type: replace Abstract: Let $S_n$ denote the set of permutations of $n$ labels. We consider a class of Gibbs probability models on $S_n$ that is a subfamily of the so-called Mallows model of random permutations. The Gibbs energy is given by a class of right invariant divergences on $S_n$ that includes common choices such as the Spearman foot rule and the Spearman rank correlation. Mukherjee in 2016 computed the limit of the (scaled) log partition function (i.e. normalizing factor) of such models as $n\rightarrow \infty$. Our objective is to compute the exact limit, as $n\rightarrow \infty$, without the log. We conjecture that this limit is given by the Fredholm determinant of an integral operator related to the so-called Schrödinger bridge probability distributions from optimal transport theory. We provide partial evidence for this conjecture, although the argument lacks a final error bound that is needed for it to become a complete proof.

24.
arXiv (quant-ph) 2026-06-17

Tensor network compression using fluid dynamics as a testbed: Analytical foundations in one dimension

arXiv:2606.17064v1 Announce Type: cross Abstract: High performance computers produce extreme-scale data sets that require sampling or compression if they are to be used to their full potential. Existing data compression techniques typically exploit features such as sparsity in the data, homogeneity in the data, or {\it a priori} knowledge of what subsets of data are of most interest. Fluid dynamics data in general do not exhibit these features and so are attractive test beds for generic compression techniques that are objective, robust, and tuneable with respect to information lost due to compression. Presented here is a method based on tensor networks, specifically matrix product states or tensor trains, that meets these requirements. The method is demonstrated for compression in one-dimension and is extensible to higher dimensionality. Lossless compression is demonstrated for random Fourier series for sufficiently high bond dimension of the tensor network, with the memory required to store the tensor network scaling directly proportional to the bond dimension. The lossy compression exhibited at lower bond dimension can be well within the relative error of many fluid simulations. The compression algorithm is tested for the time evolution of Burger's equation with excellent results. We additionally demonstrate the capability to perform computations in the compressed form through a tensor network periodic convolution that can be orders of magnitude faster than using fast Fourier transforms and the convolution theorem. In addition to being an attractive method for working with data sets generated by existing computers, the tensor network methods utilised are directly translatable to the emerging paradigm of quantum computing.

25.
arXiv (quant-ph) 2026-06-16

Quantum Information Geometry of Multicomponent Superconducting Fluctuation Transport

arXiv:2606.15928v1 Announce Type: cross Abstract: Quantum geometry underlies many electronic responses, but its transport signatures have so far been established mainly for pure single-particle Bloch states. Whether collective many-body fluctuations possess a measurable quantum geometry remains largely unexplored. Here we show that superconducting fluctuation transport provides a direct probe of quantum information geometry in collective many-body matter. Starting from a multicomponent time-dependent Ginzburg-Landau theory in the Gaussian fluctuation regime, we identify the equilibrium density matrix of fluctuating Cooper pairs as the static pair propagator, which defines a positive mixed-state manifold in momentum space. The geometry of this manifold is directly measurable through paraconductivity: the longitudinal paraconductivity is governed by the quantum Fisher information of superconducting fluctuation modes, while the fluctuational anomalous Hall effect is governed by the mean Uhlmann curvature, the mixed-state counterpart of Berry curvature. This correspondence further yields geometric bounds between these two transport components, with no direct analogue in normal electronic transport. Applied to chiral superconducting fluctuations in quarter-metal systems motivated by rhombohedral multilayer graphene, a symmetry-allowed Lifshitz invariant generates finite mean Uhlmann curvature and logarithmically enhances the anomalous Hall conductivity above the critical temperature. Our results establish collective superconducting fluctuations as an experimentally accessible transport probe of mixed-state quantum information geometry.