Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (quant-ph) 2026-06-25

Optimizing Pump Conditions of Parametric Amplifiers for Fast Multiplexed Readout of Superconducting Qubits

arXiv:2606.22080v2 Announce Type: replace Abstract: Low-noise parametric amplifiers are widely used as the first-stage amplifier in qubit readout chains. The performance of parametric amplifiers depends sensitively on the choice of the pump condition. We propose a strategy for determining the pump condition that is tailored for fast multiplexed readout. Choosing the amplifier pump to maximize the signal-to-noise ratio (SNR) improvement at the readout frequency of the limiting qubit–the qubit that requires the longest readout time to reach a target SNR–minimizes the total multiplexed readout time. We demonstrate our pump calibration strategy experimentally on a five-qubit multiplexed readout chain with a traveling-wave parametric amplifier. Using our strategy, we reduce the multiplexed readout time by 320 ns compared to optimizing the average SNR improvement on all qubits, without degrading the target SNR for any qubit.

02.
arXiv (CS.AI) 2026-06-19

LOKI: Memory-Free Null-Space Constrained Lifelong Knowledge Editing

arXiv:2606.19679v1 Announce Type: cross Abstract: Lifelong knowledge editing aims to efficiently and sequentially update language models over time, as new knowledge becomes available or when the model makes mistakes, while preserving acceptable performance on past knowledge. One unresolved challenge is that existing methods modify a fixed set of layers for all new knowledge samples, reducing flexibility and increasing catastrophic forgetting. Another is requiring access to previous knowledge and extensive pre-processing to obtain data statistics. To address these challenges, we introduce LOKI, a novel approach that uses dynamic layer selection based on the Hilbert-Schmidt Independence Criterion and projects gradient updates onto the null-space of the model weights, bypassing the requirement for previous knowledge access. We show that LOKI achieves superior performance to existing approaches across a wide variety of experiments, achieving up to a 14\% improvement in average accuracy.

03.
Nature Biotechnology 2026-06-11

Large-scale, spatially resolved panoramic CRISPR screening in native tissue environments using Perturb-DBiT

作者:

Spatially resolved CRISPR screening in vivo has been limited to small perturbation panels and subsets of protein-coding RNAs. We present Perturb-DBiT, a method for co-sequencing of spatial total RNA whole transcriptomes and single guide RNAs (sgRNAs) on the same tissue section in situ. In a human cancer metastatic colonization model, we applied large (80,000+) sgRNA panels across tumor colonies in multiple consecutive tissue sections alongside their corresponding total RNA transcriptomes. We linked perturbations affecting long noncoding RNA covariation, microRNA–mRNA interactions and distinct amino acid-specific tRNA alterations to tumor migration and growth. By integrating transcriptional pseudotime trajectories, we further observed the impact of perturbations on clonal dynamics and cooperation. In an immune-competent syngeneic mouse model, investigation of the tumor immune microenvironment indicated distinct, synergistic effects on immune infiltration and suppression. Perturb-DBiT provides a spatially resolved comprehensive view of perturbation responses in complex tissues, including small and large RNA regulation, tumor proliferation, migration, metastasis and immune interactions. In vivo CRISPR genetic perturbations are spatially mapped at scale.

04.
arXiv (CS.CV) 2026-06-24

M4-SAR: A Multi-Resolution, Multi-Polarization, Multi-Scene, Multi-Source Dataset and Benchmark for optical-SAR Object Detection

Single-source remote sensing object detection using optical or SAR images struggles in complex environments. Optical images offer rich textural details but are often affected by low-light, cloud-obscured, or low-resolution conditions, reducing the detection performance. SAR images are robust to weather, but suffer from speckle noise and limited semantic expressiveness. Optical and SAR images provide complementary advantages, and fusing them can significantly improve the detection accuracy. However, progress in this field is hindered by the lack of large-scale, standardized datasets. To address these challenges, we propose a new comprehensive dataset for optical-SAR fusion object detection, named Multi-resolution, Multi-polarization, Multi-scene, Multi-source SAR dataset (M4-SAR). It contains 112,174 instance-level aligned image pairs and nearly one million labeled instances with arbitrary orientations, spanning six key categories. To enable standardized evaluation, we develop a unified benchmarking toolkit that integrates six state-of-the-art multi-source fusion methods. Additionally, we propose E2E-OSDet, a novel end-to-end multi-source fusion detection framework that mitigates cross-domain discrepancies and establishes a robust baseline for future studies. Extensive experiments on M4-SAR demonstrate that fusing optical and SAR data can improve mAP by 5.7\% over single-source inputs, with particularly significant gains in complex environments. The dataset and code are publicly available at https://github.com/wchao0601/M4-SAR.

05.
arXiv (CS.AI) 2026-06-12

PhononBench:A Large-Scale Phonon-Based Benchmark for Dynamical Stability in Crystal Generation

arXiv:2512.21227v3 Announce Type: replace-cross Abstract: In recent years, generative artificial intelligence has made significant advances in the design of crystalline materials, giving rise to approaches based on graph neural networks, diffusion models, and large language models. Existing evaluations commonly follow the stability-uniqueness-novelty (S.U.N.) framework, where stability is primarily assessed using thermodynamic criteria, which do not fully capture the dynamical stability essential for a material's practical existence. Dynamical stability is a key determinant of whether a material can be synthesized and persist, with phonon spectrum calculations serving as the standard for its evaluation. However, the high computational cost of such calculations has prevented large-scale assessment of dynamical stability in generated crystals. In this work, we introduce PhononBench, the first large-scale benchmark for dynamical stability in AI-generated crystals. Leveraging the recently developed MatterSim interatomic potential, which achieves density-functional-theory (DFT)-level accuracy in phonon predictions across more than 10,000 materials, PhononBench enables efficient phonon calculations and dynamical-stability analysis for 133,838 crystal structures generated by 7 leading crystal generation models. PhononBench reveals a widespread limitation of current generative models: unless otherwise specified, all reported dynamical-stability metrics are evaluated at a phonon-frequency threshold of -0.1 THz, with the average dynamical-stability rate across all generated structures being only 32.15%, and the top-performing model, MatterGen, reaching just 45.05%.In addition, we identify 32,995 crystal structures that are phonon-stable across the entire Brillouin zone under a strict threshold of -0.001 THz. In addition, a web-based service is accessible at http://phononbench.cn/, enabling minute-level ultra-fast phonon predictions.

06.
arXiv (CS.CV) 2026-06-24

Fabric Image Demoiréing Benchmark from Synthesis to Restoration

Fabric moiré is a sampling-induced aliasing artifact caused by the interaction between fine textile patterns and camera sensor grids, producing structured interference that severely degrades image quality. Unlike screen-induced moiré, which stems from strictly periodic display lattices, fabric moiré is intrinsically more challenging due to the broadband and semi-periodic nature of textile weaves. The heavy spectral overlap between intrinsic texture and aliasing components renders fabric demoiréing substantially more ill-posed. Consequently, existing models trained on screen moiré datasets generalize poorly to these complex textile patterns. Despite its practical importance, fabric image demoiréing remains underexplored and lacks standardized benchmarks. We present the first comprehensive benchmark for fabric image demoiréing. To address the difficulty of acquiring pixel-aligned real-world pairs, we develop a physically motivated synthesis framework and construct a large-scale dataset comprising 16,050 paired multi-resolution fabric images with controllable aliasing severity. Furthermore, we customize a baseline model, which establishes promising performance on the proposed benchmark dataset with strong generalization ability. Our benchmark provides a standardized platform for advancing research in fabric image demoiréing.

07.
arXiv (CS.CV) 2026-06-16

SiGnature: Explicit Motion Diffusion for Stylized Semantic Gesture

While recent advances in co-speech gesture generation have achieved impressive rhythmic synchronization, synthesizing gestures that are both semantically meaningful and faithful to a speaker's unique non-verbal style remains an open challenge. Semantic gestures, such as iconic shapes or deictic pointing, are statistically sparse, making them difficult to learn effectively within standard generative models. We present SiGnature, a framework for Stylized and Semantic Gesture generation that reconciles precise semantic control with high-fidelity style preservation. Unlike prevalent methods that rely on entangled latent representations, SiGnature operates in an explicit joint-rotation space. This design enables our core contribution, Joint Motion Integration (JMI), a training-free inference mechanism capable of injecting any external motion sequence, particularly in-the-wild semantic gestures, directly into the diffusion process. JMI automatically identifies the specific ``active joints'' conveying a semantic action and injects them into the generation, while relying on the diffusion backbone to synthesize the remaining body dynamics, including posture and flow, in accordance with the pre-learned style of the target speaker. This allows for the plug-and-play integration of arbitrary motions, including complex semantic gestures, without retraining or introducing the ``Frankenstein'' artifacts typical of cut-and-paste methods. Extensive experiments and perceptual studies demonstrate that SiGnature offers superior semantic motion control while maintaining smooth and natural co-speech gesture generation and preserving the distinct characteristics of the speaker, thereby outperforming state-of-the-art baselines.

08.
arXiv (CS.CV) 2026-06-24

Solving Semi-Supervised Few-Shot Learning from an Auto-Annotation Perspective

Semi-supervised few-shot learning (SSFSL) resembles real-world applications such as auto-annotation, as it aims to learn a model from a few labeled and abundant unlabeled task-specific examples to annotate the unlabeled ones. Despite the availability of powerful open-source Vision-Language Models (VLMs) and open-world data, existing SSFSL literature largely neglects these resources. In contrast, the related area few-shot learning (FSL) has already exploited them to boost performance. Arguably, to solve real-world auto-annotation, SSFSL should leverage such open resources. To bridge this gap, we explore established SSL methods to finetune a VLM. Unexpectedly, they significantly underperform FSL baselines that do not use unlabeled data. Our in-depth analysis reveals the root cause of failure: VLMs produce flat distributions of softmax probabilities, resulting in zero utilization of unlabeled data and weak supervision signals. To address this challenge, we propose an embarrassingly simple solution that uses temperatures to sharpen the softmax output, which not only increases the confidence scores of pseudo-labels to improve the utilization of unlabeled data, but also strengthens training supervision for effective finetuning. Furthermore, we exploit task-relevant open data, e.g., those retrieved from VLMs' publicly available pretraining set. To mitigate the imbalance and domain gaps in retrieved data, we employ a stage-wise training strategy. Building on the successful finetuning of VLMs and the exploitation of open data, we present a simple yet effective SSFSL method, Stage-Wise Finetuning with Temperatures (SWIFT). Across five benchmarks, SWIFT outperforms recent FSL and SSL methods by $\sim$5 accuracy points. SWIFT even rivals supervised learning, which finetunes a VLM assuming unlabeled data having ground-truth labels!

09.
arXiv (quant-ph) 2026-06-25

A Contactless Heat Engine Driven by Nonreciprocal Fluctuation-Induced Torques

arXiv:2606.25053v1 Announce Type: new Abstract: We describe a contactless heat engine in which quantum and thermal electromagnetic fluctuations act as the working medium. The setup consists of two concentric cylinders held at different temperatures. The inner cylinder stably levitates within the outer one due to repulsive nonequilibrium Casimir forces. The chirality of the setup is broken by using nonreciprocal dielectric materials, akin to application of a magnetic field along the common cylinder axis. Using Rytov fluctuational electrodynamics, we show that heat transfer and torque can be expressed in terms of an angular-momentum-resolved heat flux density, $\Phi_n(\omega)$: each exchanged photon carries energy $\hbar \omega$ and angular momentum $\hbar n$. In reciprocal media contributions from modes $n$ and $-n$ cancel and there is no net torque; nonreciprocity breaks this symmetry and powers rotation of the inner cylinder. Even in the absence of contact, electromagnetic fluctuations produce a frictional torque opposing rotation that we compute. This enables computation of characteristic steady state rotations, and estimation of the engine efficiency (which remains bounded by the Carnot limit). The cylindrical setup provides a natural realization of fluctuation-induced angular-momentum transfer and a possible route toward nanoscale contactless engines.

10.
arXiv (CS.CV) 2026-06-17

The Slop Paradox: How Synthetic Standardization Erodes Clinical Uncertainty and Cross-Modal Alignment in AI-Rewritten Radiology Reports

作者:

AI-assisted clinical documentation tools increasingly summarize, standardize, and reformat radiology reports using large language models (LLMs). We present a controlled measurement of the resulting information degradation. Using 450 chest X-ray reports from the Indiana University dataset, we generate synthetic versions via three realistic LLM rewriting tasks: EHR summarization, standardized rewriting, and teaching case preparation. We measure entity erosion (via medical NER), hedging collapse (loss of clinical uncertainty language), and cross-modal alignment degradation (via BiomedCLIP image-text similarity). Our central finding is a dissociation between information loss and cross-modal fidelity. EHR summarization is the most destructive at the content level, eroding 51.4% of clinical entities and 43.7% of hedging language, yet it preserves image-text alignment almost entirely (a 2.5% drop). The two tasks meant to produce cleaner training data, standardized rewriting and teaching case preparation, do the reverse: they preserve more entities (26.8% and 29.3% eroded) but cause 14.9-16.5% alignment drops, six to seven times those of EHR summarization. We term this the slop paradox: rewriting that makes clinical text look cleaner for multimodal training is precisely what pulls it away from the image. Contrary to our pre-specified hypothesis, rare pathologies were not preferentially degraded: across nine rare-versus-common comparisons, no difference survived multiple-comparison correction, and nominal differences ran in the opposite direction (common > rare), so contamination is invisible to condition-specific monitoring. The dominant determinant of degradation is the type of AI rewriting task, not the clinical content. These findings bear on multimodal medical AI dataset construction and the governance of AI-assisted clinical documentation.

11.
arXiv (CS.LG) 2026-06-19

Capturing Intransitive Dominance in Tennis Forecasting: A Graph Neural Network Approach

arXiv:2510.20454v2 Announce Type: replace Abstract: Intransitive player dominance, where player A beats B, B beats C, but C beats A, is common in competitive tennis. Yet, there are few known attempts to incorporate it within forecasting methods. We address this problem with a graph neural network approach that explicitly models these intransitive relationships through temporal directed graphs, with players as nodes and their historical match outcomes as directed edges. Our model (65.7% accuracy, 0.214 Brier score) forecasts competitively with established rating systems such as Weighted Elo. Although it does not improve on the baseline in unconditional accuracy, a forecast-encompassing test shows that it carries complementary information. A combined forecast significantly outperforms Weighted Elo, and there is some indication that the gain grows more strongly on the intransitive matchups our model targets. A graph-based representation of player interactions thus captures a forecasting signal that transitive rating systems discard, even between players who share no common opponents.

12.
arXiv (CS.LG) 2026-06-18

Towards Anomaly Detection on Relational Data

arXiv:2606.18621v1 Announce Type: new Abstract: Relational databases are widely used for managing structured data in real-world systems. Detecting anomalies from such relational data is crucial for identifying fraud, risks, and abnormal behaviors, yet remains under-explored. The key challenges lie in the intrinsic complexity of relational data: multi-table attributes are high-dimensional and heterogeneous, making sparse abnormal clues easy to overwhelm by normal or irrelevant information; and anomalies may further manifest as abnormal connection patterns across different foreign-key relations, which existing tabular and graph anomaly detection methods are ill-suited to capture. To address them, we propose RelAD, a reconstruction-based framework that captures anomalies from both attribute and relational edge reconstruction. RelAD contains two core modules: conditional sparse-gated attribute reconstruction, which suppresses redundant multi-table attributes and emphasizes abnormal semantic blocks, and dual-view multi-relational edge reconstruction, which detects relation-specific abnormal connections from both intrinsic and behavioral entity profiles. The resulting attribute and relational signals are integrated through a lightweight fusion module to produce the final anomaly score. We further construct 6 benchmark datasets with systematic anomalies, on which extensive experiments show that RelAD consistently outperforms other baselines while achieving competitive efficiency.

13.
arXiv (CS.AI) 2026-06-15

Selective Agentic Recovery for UAV Autonomy with a Persistent Mission Runtime

arXiv:2606.14219v1 Announce Type: cross Abstract: Agentic AI can support unmanned aerial vehicle (UAV) autonomy by providing high-level recovery reasoning when local waypoint- or setpoint-based execution encounters blocked passages, repeated no-progress behavior, or mission-level ambiguity. On physical UAVs, however, remote reasoning is most useful when it is invoked selectively, since each call introduces latency, resource cost, backend uncertainty, and a need to validate the returned decision. This paper presents Persistent Mission Runtime (PMR), a UAV recovery framework that keeps the mission loop and safety-critical execution local while using an external agentic reasoner only as an on-demand recovery module. The reasoner selects from predefined recovery skills, and each returned decision is parsed, verified, safety-filtered, and mapped to local executor actions before it can affect flight. PMR introduces learned Cognitive Value of Invocation (learned-CVI), a compact admission gate that estimates when remote agentic reasoning is likely to improve near-term mission progress enough to justify its operational cost. Across a fixed 400-run Gazebo/PX4 benchmark with eight scenarios, learned-CVI raises hard/ambiguous-regime success from 5.0% under local-only autonomy to 95.0%, outperforms one-shot and periodic reasoning baselines by 20.0 and 32.5 percentage points, and reduces remote-agent calls by 16.7% and logged tokens by 29.2% relative to a manually tuned rule-based invocation baseline.

14.
arXiv (CS.LG) 2026-06-16

Hierarchical Advantage Weighting for Online RL Fine-Tuning of VLAs from Sparse Episode Outcomes

arXiv:2606.17043v1 Announce Type: cross Abstract: When pretrained VLA policies are fine-tuned through online RL, each rollout episode produces only a single binary outcome (success or failure), yet the actor update requires per-transition supervision. Existing approaches commonly reduce this sparse outcome to a single scalar reward or advantage signal, which conflates distinct forms of transition-level feedback and provides limited guidance once basic task success becomes achievable. First, a single scalar signal conflates the two objectives of viability and efficiency; once basic success is achieved, the binary label provides no gradient to distinguish efficient completions from slow ones. Second, real-world rollouts mix autonomous and intervention segments; naively assigning episode outcomes across these boundaries introduces incorrect credit assignment. To address these issues, we propose Hierarchical Advantage-Weighted Behavior Cloning (HABC), which trains separate critic heads for these two objectives on different data subsets and combines their outputs with a state-adaptive balance. A state-adaptive gate $g_t$ merges their one-step advantages, prioritizing viability when success is uncertain and shifting to efficiency only when viability is high, and converts the result into per-transition weights on the actor loss. Intervention-aware credit assignment further restricts outcome labels to segments executed by the current policy, preventing supervision from leaking across intervention boundaries. In real-robot experiments on three contact-rich bimanual tasks, HABC raises success from supervised fine-tuning (SFT) baselines of 36%, 44%, and 12% to 92%, 88%, and 38%.

15.
arXiv (CS.CL) 2026-06-12

LLMs Can Better Capture Human Judgments–With the Right Prompts

Are large language models (LLMs) bad at capturing human judgment? Two commonly stated limitations are that LLMs fail to capture full distributions of responses, and that their judgments are unstable across wording variations. We demonstrate simple prompting strategies that mitigate these limitations. Across two datasets–a U.S.-representative set of 144 moral scenarios and 38 moral beliefs from the International Social Survey Programme's Family and Changing Gender Roles module covering 32 countries–we show how simple elicitation techniques help improve AI-human alignment. First, prompting models to report standard deviations and response proportions recovers the full range of human responses better than common strategies. Second, ensuring scenarios are clear to human participants–as reflected in human confusion ratings–boosts model alignment, and LLMs can track human confusion ratings. At the same time, we find that LLMs' estimates of their own error are poorly calibrated, though they can predict human variability relatively well. These results suggest that asking better questions to LLMs can yield better answers.

16.
arXiv (CS.AI) 2026-06-17

Brick-DICL: Dynamic In-Context Learning for Automated Brick Schema Classification

arXiv:2606.17637v1 Announce Type: new Abstract: Building Management Systems (BMS) are essential for optimizing energy efficiency and operational performance in modern buildings. However, the lack of standardization across BMS points from different manufacturers creates significant barriers to integration and data utilization. While the Brick schema offers a standardized ontology for building systems, mapping BMS points to appropriate Brick classes presents three critical challenges: (i) the extensive number of Brick classes (936 in the latest version), (ii) limited domain-specific knowledge in large language models (LLMs), and (iii) substantial manual effort required for verification. To address these challenges, we propose Brick-DICL, a two-stage dynamic in-context learning framework for automated Brick schema classification. Brick-DICL consists of two primary components: metadata-RAG, which retrieves relevant examples to enhance LLMs' domain knowledge, and class-RAG, which narrows down potential Brick classes to address the large classification space. Additionally, we implement a multi-LLM filtering mechanism that compares predictions across multiple models, flagging low-confidence classifications for human review. As a result: (i) General: Brick-DICL is applicable to any building management system regardless of manufacturer or metadata format; (ii) Novel and Powerful: as the first dynamic in-context learning approach for Brick schema classification, Brick-DICL achieves significant classification accuracy improvements on building datasets, outperforming existing methods; (iii) Efficient: our multi-LLM filtering strategy reduces manual verification effort, enabling rapid digital building onboarding. Extensive experiments demonstrate Brick-DICL's effectiveness across diverse building datasets, accelerating the path toward standardized, interoperable building management systems.

17.
arXiv (math.PR) 2026-06-24

Decorated stable $p$-adic self-similar processes with stationary increments

arXiv:2606.24056v1 Announce Type: new Abstract: We construct new classes of examples of self-similar processes with stationary increments indexed by $\mathbb Q_p$ via stable integrals. Classical constructions arise from the real counterpart and from discounted branching random walks. We discuss a new decoration technique that significantly enlarges these classes. The decoration technique makes use of the special symmetry of $\mathbb{Q}_p$ to obtain self-similarity and stationarity of increments, and it does not have an analogue on the real line. We also show that these enlarged classes of decorated processes are pairwise incomparable under inclusion.

18.
arXiv (quant-ph) 2026-06-12

Statistical Mechanics and Symmetries of Non-Abelian Anyon Proliferation: From Deformation to Decoherence

arXiv:2606.12527v1 Announce Type: new Abstract: Topological quantum computation relies on braiding non-Abelian anyons, but requires the underlying topological order to survive imperfect state preparation and environmental noise. We show that the instability of topological order to wavefunction deformations and to decoherence, with the latter probed by syndrome distributions, are generically captured by stat-mech models whose symmetries naturally expose the corrupting anyonic excitations. As an example, we combine this framework with Monte-Carlo simulations to resolve the stability of $D_4$ topological order under deformations and quantum channels that proliferate multiple non-Abelian anyon species that individually are unable to condense. We show that beyond a finite threshold, proliferation of two non-Abelian anyon species parasitically condenses a shared Abelian-anyon fusion outcome, destroying the topological order. Our symmetry-based approach sharply differentiates the resulting trivial phase from that obtained by condensing all Abelian charges; in other words, the trivial phase "remembers" which anyons condensed. This framework provides a first step into identifying the relevant symmetry for optimal decoders, conditioned on syndrome measurements, of non-Abelian topological order.

19.
arXiv (CS.AI) 2026-06-24

OmniPath: A Multi-Modal Agentic Framework for Auditing Wheelchair Accessibility

arXiv:2606.24129v1 Announce Type: new Abstract: For a wheelchair user, a standard blue line on a map is often a broken promise. While platforms like OpenStreetMap (OSM) successfully capture where a path is, they frequently fail to convey how it physically feels to travel on it. This information barrier is problematic for wheelchair users. To solve this issue, we present OmniPath, a system that moves from passive mapping to proactive environmental auditing. Our framework fuses the network topology of OSM with the submeter precision of high-density aerial LiDAR (USGS 3DEP) to create a high-fidelity 3D model of the pedestrian environment. Rather than simply routing a user, our agent virtually traverses the network, analyzing the surface in 0.5 meter increments. It rigorously quantifies physical friction points specifically running slope, cross slope, and vertical discontinuities against ADA compliance standards, calculating a weighted severity score to categorize hazards from ``Mild'' to ``Critical.'' To ensure real world reliability, we validated the system against 200 physical ground truth field surveys across the National Mall using stratified random sampling. The framework demonstrated strong diagnostic reliability for high-severity hazards, achieving F1-scores of 0.60 for Severe and 0.58 for critical categories. By automating this micro-scale inspection, OmniPath identifies the ``invisible'' barriers that standard maps miss, effectively transforming a static dataset into accessibility data source that anticipates accessibility challenges before the user ever leaves home.

20.
arXiv (CS.CV) 2026-06-25

HiFiVe: High-Fidelity Vehicle Generation Leveraging Auto-Regressive 2D Generative Priors

Existing 3D vehicle generation methods often suffer from low geometric fidelity and blurry textures, hindering their downstream applications. While recent works adopt multi-view diffusion models for high-fidelity texture, they are often constrained by fixed viewpoints, limited resolution, and a reliance on costly fine-tuning to achieve cross-view consistency. In this paper, we propose HiFiVe, a training-free framework for high-fidelity vehicle modeling through joint texture and geometry enhancement by imposing 3D geometric constraints to anchor 2D generative priors. Specifically, we propose an auto-regressive texture refinement pipeline that progressively synthesizes high-resolution textures from arbitrary viewpoints. To ensure cross-view consistency, the coarse geometry serves as a synchronization prior, conditioning each generation step on previously synthesized frames via depth-based warping and multi-view texture fusion. Moreover, the inherent symmetry of vehicles is exploited to mitigate error accumulation. Finally, high-frequency surface details are recovered by refining the mesh geometry using normal maps estimated from the enhanced textures. Extensive experiments on synthetic and real-world vehicle datasets demonstrate that our method significantly improves both geometric detail and texture quality compared to state-of-the-art baselines.

21.
arXiv (CS.AI) 2026-06-17

Vibrato Expression Control for Singing Voice Conversion with Improving Independent Control

arXiv:2606.17126v1 Announce Type: cross Abstract: Singing style is a crucial aspect of a natural and expressive singing voice. Singers utilize singing styles to convey the feeling or emotion of the songs. Several works have been proposed to control singing style for making the more expressive singing voice. Recently, VibE-SVC successfully controls vibrato by predicting high-frequency F0 contour. In this paper, we introduce a singing voice conversion framework, called VibE-SVC2, to improve singing style conversion performance and controllability. The model offers control over two types of singing styles: a pitch style and a timbre style. For the pitch style, to resolve the pitch-energy entanglement issue that is unresolved in our previous work, we introduce a novel Energy Style Converter to address remaining style information in the energy contour. In addition, we propose a Zero-shot Pitch Style Converter, which mimics the pitch style of reference audio. To expand the controllability of the model, we propose vibrato rate scaling that is an independent control of vibrato extent, which is unavailable in VibE-SVC. For the timbre style, we extend the model to handle a variety of phonation styles. However, addressing specific styles such as vocal fry poses a challenge, as conventional F0 extraction often fails due to their inherent subharmonic characteristics, which degrades the conversion quality. To address this, we propose a novel Subharmonic Correction algorithm to refine the F0 contour for more natural timbre conversion. Through comprehensive objective and subjective evaluations, we demonstrate that VibE-SVC2 provides fine-grained, independent control over two types of singing styles, outperforming existing methods.

22.
arXiv (CS.CL) 2026-06-11

DuDi: Dual-Signal Distillation with Cross-Lingual Verbalizer

Small language models (SLMs) are efficient and scalable, but their multilingual capabilities degrade severely at sub-billion scales, especially for Southeast Asian (SEA) languages. We introduce DuDi, a dual-signal multilingual distillation framework that combines an online sequence-level signal with off-policy and on-policy token-level signals. DuDi further uses a cross-lingual verbalizer to refine teacher feedback and improve teacher-student transferability in multilingual settings. Experiments on SEA-HELM across multiple model families, scales, and teacher-student settings show that DuDi consistently outperforms competitive distillation baselines. Ablations and analyses confirm that sequence-level optimization, token-level supervision, and cross-lingual verbalization provide complementary and transferable learning signals for multilingual SLMs.

23.
arXiv (CS.CL) 2026-06-18

Dango: A Strictly L1-Only Large Language Model for Studying Second Language Acquisition

We introduce Dango, a 1.8B-parameter large language model designed for controlled studies of L1-to-L2 (Japanese-to-English) transfer in second language acquisition (SLA). While previous studies have explored SLA in language models, they have predominantly relied on smaller or non-decoder models, limiting their ability to generate open-ended text and reducing their suitability as practical L2 simulators. We identify a key challenge when scaling models to this size: L2 contamination within the "monolingual" pretraining corpus used for L1 acquisition. To address this, we propose a filtering method to reduce premature exposure to English while preserving realistic, minimal exposure. We then fine-tune the model on LLM-generated L2-learning lessons to simulate the L2 acquisition process. Our evaluations confirm that Dango develops human-like L2 production patterns, outperforming both unfiltered and standard multilingual baselines. We release the model, data, and code to facilitate reproducible computational SLA research and learner-facing applications.

24.
arXiv (CS.AI) 2026-06-24

Quant Convergence: Bridging Classical Value Investing and Modern Factor Models for Systematic Equity Selection

arXiv:2606.24575v1 Announce Type: new Abstract: Modern finance relies heavily on complex machine learning models to find patterns in the stock market. However, as these AI models get more complicated, they often memorize short-term market noise instead of finding companies with real, lasting value. We designed this research to test if Benjamin Graham's classic value investing rules could act as a mathematical "low-pass filter" to keep these modern models in check. We built three different sets of features - pure Graham rules, modern market factors, and a mix of both - and tested them against highly complex models (XGBoost and AutoGluon) using 20 years of S&P 500 data. By applying a strict buy-and-hold strategy over a four-year test period (March 2022 to March 2026), the results showed that more complex algorithms do not always win. While the AutoGluon model captured high returns (222.68%), it suffered a substantial 39.78% drop because it bought volatile tech stocks right before the market crashed. On the other hand, the pure Graham Random Forest achieved the highest overall return (232.13%) with much less risk (1.38 Calmar Ratio). Furthermore, the Combined Random Forest successfully mixed momentum with Graham's rules, making a 202.91% return while keeping the lowest maximum drop (34.53%) of any model tested. Ultimately, this research proves that Graham's "margin of safety" isn't outdated; it is actually a highly effective way to prevent modern AI from taking on too much risk.

25.
arXiv (CS.CV) 2026-06-15

Multi-Agent Embodied Autonomous Driving: From V2X Information Exchange to Shared World Models

Autonomous driving is shifting from isolated vehicle intelligence toward multi-agent embodied systems that share perception, infer intent, and coordinate action under uncertainty. This survey examines this transition through the lens of Shared World Models (SWMs): predictive cross-agent representations maintained across vehicles, infrastructure, and other traffic participants. We review more than 380 publications spanning vehicle-to-everything (V2X) communication, collaborative perception, inter-agent cognition, cooperative planning, end-to-end cooperative driving, and simulation and data engines for closed-loop validation. The organizing question is how exchanged observations become aligned state, intent-aware interaction, and coordinated downstream action. Across the surveyed literature, evaluation remains concentrated in simulation, curated benchmarks, and offline protocols. Foundation-model-based coordination also lacks verified real-time safety guarantees in open traffic. These gaps motivate key research priorities for multi-agent embodied autonomous driving (MAEAD): verifiable shared-state maintenance, robust intent and plan alignment, and safe coordinated action under communication, latency, and deployment constraints.