Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-18

Analysing drivers and interdependencies in European electricity markets using XAI

arXiv:2606.19118v1 Announce Type: new Abstract: Electricity markets are inherently complex systems characterised by strong nonlinearities, high-dimensional interactions, and increasing interdependence across regions. While deep neural networks (DNNs) have demonstrated strong predictive capabilities for electricity prices, their lack of interpretability limits their usefulness for understanding the underlying drivers of price formation. This paper addresses this gap by combining DNN models with explainable artificial intelligence (XAI) techniques to analyse the determinants of electricity prices across 39 European bidding zones. We employ SHAP (SHapley Additive exPlanations) to quantify feature contributions and apply and extend SSHAP, an aggregation framework to improve interpretability in high-dimensional settings. The analysis identifies that renewable energy sources, particularly solar, play a disproportionately important role in price formation despite their lower share in total power generation. Gas prices remain a dominant and consistent driver across electricity markets, while interconnections significantly shape price dynamics, highlighting the strong interdependence of European electricity systems. In addition, a synthetic EU-wide electricity market is constructed to explore the counterfactual scenario of a fully integrated market with a single price.

02.
bioRxiv (Bioinfo) 2026-06-19

StickForStats: automated statistical assumption validation for reproducible computational biology

Reproducible computational biology depends on statistical decisions that routine workflows often skip: verifying that a differential-expression test's assumptions hold across all genes, that a strategy-comparison ANOVA is robust to non-normality, or that a meta-analysis is not distorted by publication bias. Surveys consistently find that fewer than 20% of published biomedical studies report checking these assumptions, and existing statistical software leaves validation to the analyst as an optional step. We present StickForStats, an open-source web platform that reframes assumption validation as a default precondition for every analysis. Its Guardian system–a middleware pipeline of eight validators (normality, variance homogeneity, independence, outliers, sample size, modality, linearity, homoscedasticity)–checks assumptions before execution and, on critical violations, reroutes to an appropriate nonparametric alternative with a documented decision trail. At genome scale, applying Guardian to a 91-sample synovial-sarcoma RNA-seq study (GSE271517) cascaded 90.6% of 27,221 genes to a rank-based test and flipped the differential-expression verdict for 553 genes–479 rescued from an under-powered t-test and 74 outlier-driven false positives rejected–materially changing the gene list a biologist would act on. The same automatic validation generalizes across domains: a CRISPR editing-strategy comparison (ANOVA F = 1122, with Guardian recommending Kruskal-Wallis H = 36.6), an ordinal correlation (Pearson r = 0.476 corrected to Spearman {rho} = 0.479), and a sixteen-trial clinical meta-analysis revealing severe publication bias (Egger's t = -5.78, p < 0.001); a complementary module extends the same validators to published manuscripts, checking claims against CONSORT, STROBE, ICH-E9, and JARS-Quant reporting standards. By making assumption validation automatic and transparent, StickForStats targets a tractable, under-served contributor to irreproducibility. The platform is MIT-licensed, validated against SciPy and R, and freely available at https://github.com/visvikbharti/stickforstats_new.

03.
arXiv (CS.AI) 2026-06-19

Learner-based Concept Drift Detection: Analysis and Evaluation

arXiv:2606.20216v1 Announce Type: cross Abstract: Machine learning algorithms deployed for evolving streaming environments must handle the non-stationary data distributions, commonly referred to as concept drift. The presence of concept drift poses a major challenge for many real-world applications because it can severely degrade their predictive performance, hindering their ability to support robust decision-making. Consequently, the timely and efficient detection of drift events is critical for sustaining high accuracy over time. This study examines theoretically the concept drift characteristics and numerous drift detection algorithms across several categories. Furthermore, we evaluate their performance on both synthetic and real-world datasets exhibiting diverse streaming scenarios and drift characteristics, such as abrupt and gradual changes. This study aims to enhance understanding of the complex notion of concept drift characteristics and behavior of drift detectors, along with their applicability to diverse contexts.

04.
arXiv (CS.AI) 2026-06-19

Leveraging systems' non-linearity to tackle the scarcity of data in the design of Intelligent Fault Diagnosis Systems

arXiv:2606.20323v1 Announce Type: new Abstract: Deep Transfer Learning (DTL) allows for the efficient building of Intelligent Fault Diagnosis Systems (IFDS). On the other hand, DTL methods still heavily rely on large amounts of labelled data. Obtaining such an amount of data can be challenging when dealing with machines or structures faults. This document proposes a novel approach to the design of vibration-based IFDS using DTL in condition of strong data scarcity. A periodic multi-excitation level procedure leveraging intrinsic non-linearities of real-world systems is used to produce images that can be conveniently analysed by pre-trained Convolutional Neural Networks (CNNs) to diagnose faults. A new data visualization method and its augmentation technique are proposed in this paper to tackle the typical lack of data encountered during the design of IFDS. Experimental validation on a railway pantograph structure provides effective support for the proposed method.

05.
medRxiv (Medicine) 2026-06-16

Supplementation with Arabinoxylan Dietary Fiber at Low Doses Produces Behavioral, Metabolic, and Gut Microbial Changes in Healthy, Overweight Adults: A Randomized Placebo-Controlled Trial

Background: Dietary fiber comprises a heterogeneous group of compounds with distinct physicochemical properties and biological effects. As such, functional outcomes observed for one fiber cannot be generalized to others. Some fermentable fibers, such as arabinoxylan, may exert biologically selective effects across multiple physiological domains, highlighting the need to evaluate individual ingredients for their domain-specific activity in controlled human studies. Methods: In this randomized, double-blind, parallel, 3-arm, placebo-controlled trial, healthy, overweight adults were assigned to consume one of two low doses of an arabinoxylan dietary fiber (3.5g or 5g) or placebo over the intervention period. Self-reported appetite sensations were assessed as the primary outcome using validated visual analogue scales. Secondary and exploratory endpoints included lipid parameters, gastrointestinal outcomes, mood-related measures, and gut microbiota composition and fermentation-derived metabolites. Analyses were conducted in the full analysis set and a high-compliance population to assess responses under sustained intake conditions, as per the intended dosing regimen. Results: The primary endpoint of appetite sensations did not differ between either arabinoxylan group and placebo. In contrast, evidence of microbial fermentation and selective microbiota engagement was observed. These responses occurred alongside consistent and favorable changes in lipid parameters under conditions of sustained intake, including reductions in low-density lipoprotein cholesterol and triglycerides. Additional outcomes, including gastrointestinal symptoms and mood, demonstrated domain-specific responses. Conclusion: This study demonstrates that supplementation with low doses of arabinoxylan dietary fiber elicit biologically selective, domain-specific effects across metabolic, microbial, gastrointestinal, and behavioral outcomes, particularly under conditions of sustained intake. These responses occurred independently of changes in appetite sensation, indicating that functional effects were not mediated through appetite-related pathways. Collectively, the findings highlight the ingredient's biological versatility and contextual responsiveness across physiological systems, and suggest its prebiotic potential through alignment with ISAPP's definition of a prebiotic, supporting further investigation of specific mechanistic pathways. Clinical trial registration: https://clinicaltrials.gov/study/NCT06884449, identifier: NCT06884449

06.
arXiv (quant-ph) 2026-06-11

High-efficiency telecom conversion of heralded atomic biphoton wavepackets

arXiv:2603.09824v2 Announce Type: replace Abstract: We demonstrate high-efficiency telecom frequency conversion of heralded atomic biphoton wavepackets using a diamond-type atomic ensemble. By placing a 2.5 MHz heralded-photon spectrum within the high-efficiency region of the converter response, we achieve a conversion efficiency of 79.4(2.6)% while maintaining strong time-resolved correlations and well-defined temporal wavepackets. For a broader 17.4 MHz input bandwidth, the conversion efficiency is reduced to about 55%, whereas the temporal waveform remains largely preserved. This behavior reflects the nearly flat central response of the converter, which mainly causes spectral-edge loss rather than temporal-mode distortion. These results identify spectral matching as an effective route to efficient and low-distortion telecom conversion of narrowband quantum light from atomic systems.

07.
arXiv (CS.CV) 2026-06-12

Where, What, Why, and Importance: Structured Defect Grounding for Text-to-Image Feedback

Despite generating increasingly photorealistic images, text-to-image (T2I) models still exhibit localized, subtle, and structurally complex failures. Diagnosing these failures requires instance-level feedback that answers where a defect occurs, what type it is, why it is defective, and its importance to overall image quality. While recent dense-feedback methods move beyond scalar supervision, their heatmap-centric representations still formulate diagnosis as pixel-field regression, making it difficult to localize variable-cardinality defects and bind semantic reasons to individual failures. To address this representation bottleneck, we propose Structured Defect Grounding (SDG), which casts T2I diagnosis as structured set prediction by modeling each defect as a (location, type, reason, importance) tuple. To make this formulation trainable and measurable, we introduce SDG-30K, a 30K-image dataset with box-grounded annotations across four modern T2I generators, together with a dedicated evaluation protocol, SDG-Eval. Building on this structured representation, we further present a diagnosis-to-alignment framework in which a Vision-Language Model (VLM) serves as the SDG detector, and BoxFlow-GRPO converts predicted defect sets into box-derived, importance-weighted spatial rewards for diffusion model alignment. Extensive experiments show that our SDG detector outperforms leading proprietary VLMs on structured defect grounding, while SDG-guided rewards consistently improve T2I alignment and support localized image refinement. These results establish SDG as a unified, instance-level interface for diagnosing, evaluating, and enhancing modern generative models.

08.
arXiv (CS.LG) 2026-06-17

A Diffusion Approximation for Temporal-Difference Learning with Linear Features under Markovian Noise

arXiv:2606.18183v1 Announce Type: cross Abstract: Temporal difference (TD) learning with linear function approximation is a core method for policy evaluation. Its classical continuous-time description is an ordinary differential equation (ODE), which captures the asymptotic mean dynamics but neglects stochastic fluctuations determining the error floor. We introduce a stochastic differential equation (SDE) approximation for linear TD(0) under Markovian noise. The resulting model distinguishes the contraction dynamics governed by the projected Bellman operator from the influence of Markovian sampling. As a consequence, the model explains the constant-stepsize error floor through the interaction between Markovian long-run covariance and the contraction geometry of the projected Bellman operator.

09.
arXiv (CS.CV) 2026-06-16

SLU-2K: A Question-Based Benchmark for Semantic Evaluation of Sign Language Translation

Sign Language Translation (SLT) is typically evaluated with surface-form metrics such as BLEU and ROUGE, which reward lexical overlap but do not directly measure whether a translation preserves the meaning of the source sign sequence. This is in contrast with the final objective of integrating SLT in assistive technology. In this work, we shift the focus from Sign Language Translation (SLT) to Sign Language Understanding (SLU), with particular emphasis on semantic understanding. Specifically, we evaluate systems based on their ability to correctly recover, from the input video, key semantic aspects of the original sentence, such as actions taking place and facts about people and objects. To enable this evaluation systematically, we propose SLU-2K, a dataset of 2,350 closed-ended video question-answer pairs based on the popular PHOENIX-2014T and CSL-Daily datasets. To obtain SLU-2K, we propose and extensively evaluate an automated data generation pipeline which produces questions across 7 categories, namely actions, locations, numbers, objects, people, time, and weather conditions. We show the potential of SLU-2K by evaluating popular Multimodal Large Language Models (MLLMs) and two representative state-of-the-art systems, MMSTL and SpaMo. Our results show that MLLMs reach near-random performance, highlighting the need for a more systematic integration of SLU in current AI systems. Furthermore, state-of-the-art translation systems carefully fine-tuned on in-domain data still exhibit a substantial semantic gap, with results ranging from 56.7% to 75.2%. These findings suggest that current SLT evaluation protocols overestimate true understanding and that future progress should be measured not only by fluency and n-gram overlap, but also by semantic correctness. Code, prompts, and benchmark files are available at https://github.com/ZenoTsT/SLU-2K

10.
arXiv (CS.CV) 2026-06-16

Wavelength-Multiplexed 2D Beam Steering via a Passive Diffractive Network

We introduce a wavelength-addressable diffractive optical network that transforms illumination wavelength into a high-dimensional control parameter for arbitrarily programmable 2D beam steering. The proposed passive architecture comprises cascaded spatially optimized diffractive layers, jointly designed using deep learning, to rapidly map distinct wavelengths to predefined/desired output angles. Unlike conventional single-layer dispersive optical elements, which are physically restricted to 1D linear mapping, this framework harnesses complex wavefront transformations to utilize the illumination wavelength as an intrinsic addressing key for arbitrary 2D beam steering, eliminating the need for mechanical scanning or electronic phase control. We numerically demonstrate wavelength-controlled beam steering across 625 wavelength channels spanning 400-750 nm, realizing a 25 x 25 array of independently addressable beam positions with subwavelength positioning accuracy and high channel fidelity. Unlike conventional gratings, which constrain wavelength routing to a linear trajectory, the proposed diffractive network performs nonlocal wavefront transformations, enabling arbitrary wavelength-to-angle mappings across a 2D field of view. We further validate the proposed framework experimentally in both the terahertz and visible spectral regimes, demonstrating wavelength-multiplexed beam steering using 3D fabricated passive diffractive layers at terahertz frequencies and phase-only spatial light modulators in the visible spectrum. This wavelength-addressable diffractive architecture establishes a compact and scalable paradigm for high-speed programmable beam steering, with potential applications in optical communications, routing, imaging, sensing, and emerging photonic information-processing systems.

11.
arXiv (quant-ph) 2026-06-16

Connecting entanglement growth with local integrals of motion in the disordered Fermi-Hubbard model

arXiv:2606.15481v1 Announce Type: new Abstract: Generically a quantum system initialized in an unentangled state will, under unitary dynamics, rapidly become entangled, a process closely related to information transport and to thermalization. Disorder can suppress the growth of entanglement and result in memory of initial conditions. In non-interacting systems this arises from localization of single-particle states, the occupancy of which is fixed by the initial condition. In interacting systems similar localized conserved quantities persist, but with the added feature that they are coupled, resulting in entanglement growth which is distinct from both non-interacting localized systems and from generic ergodic systems. The Fermi-Hubbard model has two degrees of freedom per site – charge and spin – and disorder may be present in both of these. We study the growth of entanglement in two scenarios – disorder in charge equal and unequal to that in spin, and determine the distinct contributions of charge and spin degrees of freedom by expanding the Hamiltonian in terms of a set of optimally localized conserved quantities with separate charge and spin character. We find that coupling between charge and spin is significantly weaker than charge-charge and spin-spin coupling. While this decoupling is present in all our results, it is only apparent when the strength of the disorder in the two sectors is different such that there is a separation between the characteristic timescales of the contributions to entanglement made by charge and by spin.

12.
arXiv (CS.AI) 2026-06-19

BrainG3N: A Dual-Purpose Tokenizer for Controllable 3D Brain MRI Generation

arXiv:2606.19651v1 Announce Type: new Abstract: Three-dimensional (3D) brain MRI is central to clinical neurology and neuro-oncology, where generative models could augment under-represented cohorts, simulate disease trajectories, and support privacy-preserving data sharing. Latent diffusion has been the go-to solution for modeling imaging data, but it places two competing demands on the tokenizer: encoder embeddings must retain the clinical information that downstream tasks act on, and the decoder must reconstruct anatomically faithful volumes. Existing reconstruction-driven tokenizers achieve the second at the expense of the first. To address this, we introduce a fully volumetric masked-autoencoder (MAE) based tokenizer for 3D brain MRI latent diffusion, decoupling encoder and decoder: a frozen 3D MAE encoder produces clinically informative embeddings, while a dedicated CNN decoder reconstructs voxels from a linear projection of those embeddings. We pretrain the encoder on 35,309 volumes from 18 public cohorts spanning four modalities, ten disease categories, and 200+ acquisition sites, and demonstrate its dual utility in two settings. First, on a 23-task linear-probing benchmark, the encoder outperforms or matches SOTA models (i.e., BrainIAC, BrainSegFounder, and MedicalNet) on 21 of 23 tasks. Second, a conditional diffusion transformer (DiT) trained on these clinically informative embeddings supports both conditional generation across six variables and patient-specific longitudinal forecasting. Together these results establish a single 3D brain-MRI embedding space capable of both downstream clinical tasks and controllable generation.

13.
arXiv (CS.CL) 2026-06-19

Target-Side Paraphrase Augmentation for Sign Language Translation with Large Language Models

Sign language translation (SLT) remains constrained by the limited availability of paired sign-video/text corpora and by the heavy-tailed vocabularies typical of real-world datasets. We study a target-side augmentation strategy in which a large language model (LLM) generates controlled paraphrase variants of the reference spoken-language sentence while the sign input remains unchanged. Concretely, we use GPT-4o to produce semantically faithful variants of the training targets and train a Signformer-style pose-based Transformer under a two-stage schedule: pre-training on the augmented corpus followed by fine-tuning on the original references. We evaluate this strategy on three datasets that span complementary challenges: PHOENIX14T (German Sign Language), a real-world corpus with moderate lexical diversity; the Greek Sign Language Dataset with highly controlled, repetitive recordings; and LSA-T (Argentinian Sign Language), a naturalistic corpus with a large vocabulary and severe long-tail sparsity. This range allows us to characterize precisely when and why target-side augmentation is beneficial. On PHOENIX14T, augmentation improves BLEU-4 from 9.56 to 10.33, demonstrating that paraphrastic exposure helps the decoder generalize beyond memorized reference phrasing. The near-saturated GSL baseline and the extremely sparse LSA-T setting reveal the limits of the approach: in both cases, single-reference lexical overlap metrics are insufficient to capture the full picture, motivating a complementary semantic evaluation. To our knowledge, this is the first study to examine LLM-generated target-side paraphrases as an augmentation mechanism for SLT, and the first to apply an LLM-as-a-Judge evaluation protocol to SLT. This complementary evaluation reveals gains in semantic fidelity that lexical overlap metrics understate.

14.
arXiv (CS.LG) 2026-06-11

Loss Landscape Diagnosis for Gradient-Based Gray-Scott System Inversion: Disentangling the Roles of PINN Components

作者:

arXiv:2606.11258v1 Announce Type: new Abstract: Gradient-based inversion of reaction-diffusion systems is typically approached via surrogate models or physics-informed neural networks (PINNs), while the most direct route, backpropagation through the PDE's structure itself, has largely been avoided. We pursue this direct route as a diagnostic probe, backpropagating a steady-state loss through unrolled Gray-Scott simulation to recover its parameters, with no surrogate or neural-network augmentation. Optimization fails to converge, and plotting the landscape directly locates the failure in its geometry – flat plateaus with no gradient signal, bounded by sharp cliffs that align with bifurcation boundaries – a structure that recurs across loss functions and is inherited however the gradients are routed to parameters. Reading this minimal setup as an ablation of PINN, we disentangle each component's role: with the neural network fixed, the residual loss is quadratic in the PDE parameters and yields a smooth landscape, so it alone already avoids the pathology, by implicitly encoding the full PDE dynamics across all initial conditions. The neural network, for its part, cannot repair an ill-posed parameter subspace, and so serves only to complete the observed data – a division of labor not previously made explicit. These findings carry concrete design implications for PINN-type methods and a broader heuristic on when added dimensions actually help.

15.
medRxiv (Medicine) 2026-06-15

Investigation of Intra-Fraction Stability and Inter-Fraction Reproducibility of Deep Inspiration Breath-Hold Across Two Hypofractionated Radiotherapy Regimens in the HYPORT Adjuvant Study.

Background: Deep Inspiration Breath Hold (DIBH) is a widely used respiratory motion management technique for minimizing cardiac dose in left-sided breast radiotherapy. In the Breast HYPORT Adjuvant study, DIBH was employed for cardiac sparing in patients without nodal irradiation using a standardized institutional protocol with the Varian Real-time Position Management (RPM) system. Both moderate-hypofractionation (control arm - 40Gy in 15 fractions) and one-week hypofractionation (experimental arm - 26 Gy in 5 fractions) regimens were delivered using this protocol. This study aimed to evaluate the robustness of DIBH by analyzing intra-fraction stability and inter-fraction reproducibility of breath-hold amplitude across the two treatment regimens. Methods: Respiratory waveforms acquired during each treatment session were analyzed to determine the median breath-hold amplitude and its standard deviation during beam delivery. Intra-fraction stability was assessed from vari- ations within individual treatment sessions, while inter-fraction reproducibility was evaluated relative to the simula- tion waveform amplitude across all treatment sessions. These parameters were compared between the two HYPORT regimens to examine breath-hold consistency during treatment delivery. Moreover, an additional comparison was made between the one-week hypofractionation regimen and the first five fractions of the moderate-hypofractionation regimen to evaluate the effect of treatment duration . Lung volumes from free-breathing and DIBH CT scans were analyzed to assess the effectiveness of patient breath-hold training. Results: Both arms demonstrated an average 1.7-fold increase of air volume in lung during the breath-hold position, confirming the effective implementation of DIBH during treatment planning and delivery. Structured training resulted in increased breath-hold amplitudes, with gains of 22.87% and 24.16% with respect to the first trial session in the experimental and control arms, respectively. Both regimens receive equivalent doses for approximately the same air volume in lung . Despite the different prescription doses in the two arms (26 Gy vs. 40 Gy), the experimental arm achieved an equivalent mean heart dose of 2.91% (75.6 cGy) compared with 2.95% (118.51 cGy) in the control arm, suggesting a similar cardiac preservation protocol adopted during treatment planning. Intra-fraction stability was similar between the control arm and the experimental arm, with median amplitude variations of 1.006 mm (95% CI: [0.998-1.015]) and 1.079 mm (95% CI: [1.067-1.097]), respectively. In contrast, inter-fraction reproducibility improved in the experimental arm, with lower deviation from simulation amplitude (0.44 {+/-} 0.24 mm vs. 0.66 {+/-} 0.25 mm) for the entire treatment schedule. The stability and reproducibility of experimental arm were further compared with the first five fractions of the control arm. The results were similar to those of the experimental arm. Conclusion: In this study, we compared two treatment regimens in terms of intra-fraction stability and inter-fraction reproducibility during DIBH radiotherapy. Both regimens demonstrated comparable intra-fraction stability, indicating effective motion management irrespective of treatment duration. However, the experimental arm showed better inter- fraction reproducibility, suggesting more consistent breath-hold performance throughout the treatment course. Based on stability and reproducibility, a reasonable narrowing of the DIBH gating window may be implemented with minor changes to the institutional protocol. The observed trend highlights the potential for improved consistency with the experimental approach and supports further investigation to better understand the underlying factors and strengthen these findings in future studies.

16.
arXiv (CS.LG) 2026-06-11

Restless bandits with imperfect binary feedback: PCL-indexability analysis and computation

arXiv:2606.11192v1 Announce Type: new Abstract: We study restless bandits with binary latent states and imperfect binary feedback, motivated by opportunistic spectrum access with sensing errors. For the associated belief-state model, we develop a partial conservation laws (PCL)-based analytical and computational framework for establishing indexability and evaluating the Whittle index, building on a verification theorem for real-state discounted restless bandits. The framework analyzes the stochastic dynamics via an associated deterministic skeleton, renewal decompositions, and combinatorics on words. It yields tractable expressions for discounted reward and resource metrics in several threshold regimes, enabling full verification of the PCL-indexability conditions there. For the remaining regime, where a complete analytic verification is not achieved in this paper, we derive efficient numerical schemes for computing the relevant marginal metrics and the marginal productivity (MP) index, which equals the Whittle index when those conditions hold. Extensive computational experiments provide strong evidence that these conditions also hold in that regime across broad parameter ranges and without the stringent parameter restrictions imposed in prior work. The experiments further show that theMP index policy typically outperforms standard benchmark policies, often by a substantial margin.

17.
arXiv (CS.AI) 2026-06-16

ControlMap: Controllable High-Definition Map Generation for Traffic Scenario Simulation

arXiv:2606.15930v1 Announce Type: cross Abstract: Simulation is central to validating autonomous driving systems, yet current pipelines are limited by insufficient scenario diversity due to costly High Definition (HD) map creation. Scaling HD maps requires expensive data collection and manual processing. Moreover, existing generative models lack the fine-grained control necessary to target specific road topologies during generation. This paper presents a data-driven pipeline for controllable HD map generation using latent diffusion and ControlNet for spatial conditioning. To our knowledge, we are the first to inject spatial guidance signals into a diffusion model for HD map synthesis. Furthermore, our model supports adjustable conditioning strength through classifier-free guidance and city-level style transfer via city label conditioning. To complement existing metrics, we introduce two novel metrics to evaluate adherence to the control signal and similarity to ground-truth maps. Experiments demonstrate that our model generates realistic HD maps that faithfully follow input road topologies while accurately preserving city-specific details.

18.
arXiv (CS.LG) 2026-06-19

Adaptive Distance-Aware Trunk Deep Operator Learning for Long-Span Roadway Bridges

arXiv:2606.20015v1 Announce Type: new Abstract: Long-span roadway bridges exhibit highly localized structural responses under vehicular loading, making repeated FE analysis computationally expensive for applications such as influence surface generation and structural digital twins. Existing SciML approaches struggle to accurately capture these localized responses. To address this challenge, this study proposes an adaptive-trunk DeepONet for localized structural response prediction in large-scale bridge systems. The framework dynamically constructs a load-dependent learning domain using a KNN strategy, allowing the network to focus on structural influence zones. The trunk network is further enhanced using distance-aware features that encode the geometric relationship between the load and structural nodes. A physics-based full-field reconstruction is incorporated through a stiffness-informed Schur complement formulation, enabling predictions at adaptive nodes to be extended to the entire structural domain. To enable scalable training, response data are generated using a reduced-order equivalent shell model that preserves the dominant global behavior while significantly reducing computational cost. The proposed framework is validated on both a benchmark bridge model and the real-world Mussafah Bridge. Results show that the method achieves FEM-level accuracy with relative errors below 5%, while reducing the total response evaluation time (including full-field reconstruction) by approximately 60x; excluding the post-processing reconstruction step, the AD-DeepONet inference is up to four orders of magnitude faster than FEM. In addition, the framework enables rapid generation of full-field responses, influence lines, and influence surfaces under arbitrary vehicular loading configurations, demonstrating strong potential for large-scale bridge analysis and digital twin applications.

19.
medRxiv (Medicine) 2026-06-23

Food Colorings in Child-Targeted Ultra-Processed Foods in Brazil: Market Prevalence and Parental Perceptions

Child-targeted marketing on packaged foods can shape children's food preferences and parents' purchasing decisions, yet many products with child-targeted marketing are ultra-processed foods (UPFs) and contain cosmetic additives such as food colorings, which have raised concerns about adverse effects on children's health and behavior. This mixed-methods study examined the prevalence of food colorings in child-directed UPFs and explored parents' perceptions and knowledge of these additives in beverages commonly consumed by children. Quantitative data were obtained from the Mintel Global New Products Database to identify child-directed products launched in Brazil between 2018 and 2021, measured as having at least one child-targeted marketing strategy in the food package, and whether they contained food colorings. Qualitative data came from seven focus groups with parents of children aged 2-5 and 6-11 years in Brazil, alongside a brief survey assessing participants' ability to identify food colorings on product labels. Among 5,078 UPFs launched during the study period, 23.0% contained child-targeted marketing, and 40.3% of these had food colorings. The highest prevalence was observed in carbonated beverages, candies, and ice creams, in which more than half of products contained food colorings. Parents generally understood that food colorings are used to make products more attractive to children and associated them with potential health risks, but reported difficulties avoiding them. These findings highlight the widespread presence of food colorings in child-targeted UPFs in Brazil and underscore the need for stronger regulatory measures to restrict the use of food colorings and improve labelling on food packages.

20.
arXiv (CS.CV) 2026-06-17

Phys4D: Fine-Grained Physics-Consistent 4D Modeling from Video Diffusion

Recent video diffusion models have achieved impressive capabilities as large-scale generative world models. However, these models often struggle with fine-grained physical consistency, exhibiting physically implausible dynamics over time. In this work, we present Phys4D, a pipeline for learning physics-consistent 4D world representations from video diffusion models. Phys4D adopts a three-stage training paradigm that progressively lifts appearance-driven video diffusion models into physics-consistent 4D world representations. We first bootstrap robust geometry and motion representations through large-scale pseudo-supervised pretraining, establishing a foundation for 4D scene modeling. We then perform physics-grounded supervised fine-tuning using simulation-generated data, enforcing temporally consistent 4D dynamics. Finally, we apply simulation-grounded reinforcement learning to correct residual physical violations that are difficult to capture through explicit supervision. To evaluate fine-grained physical consistency beyond appearance-based metrics, we introduce a set of 4D world consistency evaluation that probe geometric coherence, motion stability, and long-horizon physical plausibility. Experimental results demonstrate that Phys4D substantially improves fine-grained spatiotemporal and physical consistency compared to appearance-driven baselines, while maintaining strong generative performance. Our project page is available at https://sensational-brioche-7657e7.netlify.app/

21.
arXiv (CS.CV) 2026-06-11

P3D-Bench: Benchmarking MLLMs for Parametric 3D Generation and Structural Reasoning

Multimodal large language models can write code to produce complex programs as well as use programs to do 3D modeling, which opens up a new avenue for 3D generation powered by their priors, world knowledge and reasoning. Yet existing benchmarks rarely evaluate 3D modeling through code. Such modeling demands more than runnable code: from a text or visual specification, a model must generate a parametric 3D program that is geometrically precise, semantically aligned and assembly-consistent. We introduce P3D-Bench, a benchmark for parametric 3D generation. Unlike a 3D mesh, a parametric 3D program exposes explicit dimensions, construction operations and part relations, revealing whether a model recovers a design's structure, not just its appearance. Under a unified protocol, P3D-Bench covers three task families (Text-to-3D, Image-to-3D and Assembly-3D) and scores each output for executability, geometric fidelity, topology, text-grounded constraints, multiview semantic alignment and part-level structure. We evaluate frontier MLLMs and text-only LLMs on 400 text cases, 400 image cases and 203 annotated assemblies, with domain-specific models as reference points. Our extensive evaluation yields three findings. First, assemblies are the hardest setting, where models still fail to compose multiple parts into a coherent structure. Second, models can often recover the global shape and semantic identity of the target object, yet fail to reproduce the precise parametric geometry specified by the input. Third, part-level modeling remains weak on assemblies, where models recover neither the geometry of each part nor the right number of parts. These results position P3D-Bench as a benchmark for evaluating precise parametric geometry and part-level structure in parametric 3D generation.

22.
arXiv (CS.LG) 2026-06-12

GenAutoML: An Agentic Framework for Dynamic Architecture Generation and Optimization in Time-Series Analysis

arXiv:2606.05860v2 Announce Type: replace Abstract: Designing neural architectures for time-series forecasting and anomaly detection remains a resource-intensive task that often requires substantial domain expertise. Traditional Automated Machine Learning (AutoML) systems typically rely on static, predefined search spaces, limiting their ability to adapt to diverse data characteristics. We present GenAutoML, an agentic framework that leverages Large Language Models (LLMs) as neural architects to bridge natural-language requirements and executable PyTorch implementations. The framework incorporates a Sandboxed Reflection Loop for autonomous code refinement and a Signature-Aware Runtime that enforces architectural consistency and execution safety. To improve robustness under non-stationary conditions, we further introduce a Dynamic Reversible Instance Normalization (Dyn-RevIN) wrapper. Experiments on the ETTh1, ETTm1, and Weather benchmarks demonstrate that GenAutoML can dynamically generate task-specific neural architectures tailored to dataset characteristics. Among the generated models, WaveInterferenceNet achieves inference latency below 0.01 ms per sample while maintaining competitive predictive performance. By emphasizing computational efficiency, architectural adaptability, and stable optimization behavior, GenAutoML enables the creation of ultra-lightweight neural networks suitable for resource-constrained and latency-sensitive Edge AI deployments.

23.
arXiv (CS.AI) 2026-06-11

Mind the Perspective: Let's Reason Recursively for Theory of Mind

arXiv:2606.11724v1 Announce Type: new Abstract: Theory of Mind (ToM) reasoning requires inferring agents' beliefs from partial and asymmetric observations, which remains an open challenge for LLMs. Existing prompting-based approaches improve ToM reasoning through observable-event filtering or temporal belief chains, without explicitly modeling nested beliefs. We introduce RecToM, an inference-time framework for ToM reasoning that models nested beliefs via recursive perspective construction. RecToM constructs each character perspective from the preceding character perspective along the character chain specified by the question, reducing higher-order belief questions to actual-world questions within the final constructed perspective. We further provide a KD45 analysis showing that RecToM's perspective construction induces a well-formed belief modality beyond simple event filtering. Experiments on ToM benchmarks, including Hi-ToM, Big-ToM, and FanToM, across multiple LLM backbones show that RecToM consistently outperforms recent advanced approaches, achieving state-of-the-art performance. Notably, RecToM reaches 100\% accuracy on Hi-ToM with GPT-5.4 and Qwen3.5, a benchmark requiring higher-order ToM reasoning.

24.
arXiv (CS.CL) 2026-06-19

S2D2: Fast Decoding for Diffusion LLMs via Training-Free Self-Speculation

Block-diffusion language models offer a promising path toward faster-than-autoregressive generation by combining block-wise autoregressive decoding with within-block parallel denoising. However, in the few-step regime needed for practical acceleration, standard confidence-thresholded decoding is often brittle: aggressive thresholds hurt quality, while conservative thresholds require unnecessary denoising steps. Existing approaches that address this issue either require additional training or incur extra test-time compute. We present S2D2, a training-free self-speculative decoding framework for block-diffusion language models. Our key observation is that a block-diffusion model becomes autoregressive when the block size is reduced to one, allowing the same pretrained model to act as both drafter and verifier. S2D2 inserts a speculative verification step into standard block-diffusion decoding and uses lightweight routing policies to decide when verification is worth its cost. This yields a hybrid decoding trajectory in which diffusion proposes tokens in parallel, while the autoregressive mode acts as a local sequence-level critic. Across three mainstream block-diffusion families, S2D2 consistently improves the accuracy-speed tradeoff over strong confidence-thresholding baselines. On SDAR, we observe up to $4.7\times$ speedup over autoregressive decoding, and up to $1.57\times$ over a tuned dynamic decoding baseline while improving accuracy by up to $4.5$ points. On LLaDA2.1-Mini, S2D2 remains complementary to built-in self-correction, including a conservative setting where it is $4.4\times$ faster than the static baseline with slightly higher accuracy.

25.
arXiv (CS.AI) 2026-06-16

FineVLA: Fine-Grained Instruction Alignment for Steerable Vision-Language-Action Policies

arXiv:2605.27284v2 Announce Type: replace-cross Abstract: Vision-Language-Action (VLA) models are increasingly expected to not only complete robot tasks, but also follow human instructions about how those tasks should be executed. However, existing robot datasets usually pair trajectories with coarse goal-level language, leaving execution-critical details such as active arm, approach direction, and contact region unspecified. This limits steerable policy learning and robotic video understanding. We introduce FineVLA, an open framework for action-aligned fine-grained VLA supervision. The framework includes: (1) a data construction tool that unifies 972,247 trajectories across 85K tasks from 10 open-source robot datasets and builds FineVLA-Data, a human-verified dataset of 47,159 fine-grained trajectories; (2) a held-out benchmark with 500 videos, 11,631 atomic facts, and 1,030 VQA questions; (3) a robotics-specialized VLM annotator for scalable fine-grained annotation; and (4) a steerable VLA policy trained with controlled mixtures of fine-grained and raw goal-level instructions. Our experiments yield three findings. First, fine-grained supervision does not sacrifice goal-level success: FG-only improves over Raw-only by +1.4 to +8.1 success-rate points across settings. Second, fine-grained and raw instructions are complementary, following a consistent inverted-U trend peaking at FG:Raw = 1:2 to 1:1. The best mixed setting reaches 86.8%/82.5% in RoboTwin simulation and 62.7/100 in real-world dual-arm manipulation (vs. 49.9 Raw-only). Third, fine-grained supervision improves steerable control: the largest real-world gains appear on pose (+23), color (+18), and approach direction (+18)–factors where goal-level instructions provide no guidance. Overall, fine-grained language should augment goal-level instructions: specifying how to execute alongside what to achieve. Project page: https://finevla.xlang.ai/