Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
bioRxiv (Bioinfo) 2026-06-16

FlowBench: separating planning, fault recovery and interpretation in agentic bioinformatics

Agentic large language model (LLM) systems are being deployed in bioinformatics faster than they are understood, and single-metric evaluations conflate capabilities that fail independently. We introduce FlowBench, a benchmark that decomposes agentic bioinformatics performance into planning, fault recovery, biological interpretation, and end-to-end output-fidelity. Existing systems achieve high plan completeness, but their closed, single-provider designs prevent attribution of performance to scaffolding versus the underlying model. We therefore built FlowAgent, a modular, provider-agnostic framework whose components can be selectively disabled and whose backbone model can be swapped across providers on a shared harness, and used it to evaluate 23 models from three main providers. Three findings emerge. First, generating a valid workflow plan from a named toolchain is largely solved, whereas inferring an appropriate toolchain from biological intent alone is uniformly difficult regardless of model tier, compressing all models into a narrow 44-57% pass-rate band. Second, ablation shows that the dependency-structured plan and a completeness-reflection step drive performance, while adding a same-context validator-driven retry makes structural quality worse. Third, fault recovery and data-grounded interpretation remain unsolved. Models frequently propose fixes that force a clean exit while leaving the underlying data invalid, and data-grounded interpretation lags internal-knowledge recall by a consistent margin. Safety does not emerge from capability, and reasoning-tier models were among the least reliable at recognising unrecoverable faults. Once planning saturates, agent architecture and refusal calibration, not model scale, are the productive frontier.

02.
arXiv (CS.LG) 2026-06-12

A unified complexity bound for logconcave sampling

arXiv:2606.12694v1 Announce Type: cross Abstract: We give a simple, unified, and nearly tight bound for sampling arbitrary logconcave distributions from a warm start using the In-and-Out algorithm along with exponential lifting. The main new ingredient in the analysis is an improved bound on the Poincaré constant of a lifted distribution. As a consequence, the resulting convergence rate is nearly tight for both constrained settings (e.g., Gaussian restricted to a convex body) and well-conditioned settings (e.g., strongly logconcave and smooth densities).

03.
arXiv (CS.CL) 2026-06-12

Structuring The Future: Diffusion LLM Speculative Decoding via Calibrated Draft Graphs

Diffusion LLMs (dLLMs) have recently emerged as a powerful alternative to autoregressive LLMs (AR-LLMs) with the potential to operate at significantly higher token-generation rates. To unlock this potential, we present Spiffy, a speculative decoding algorithm to accelerate dLLM inference while provably preserving the model's output distribution. This work addresses the unique challenges involved in applying ideas from speculative decoding of AR-LLMs to dLLMs. Spiffy performs auto-speculation to eliminate the overheads of an independent draft model, structuring draft states in the form of a novel directed draft graph to take advantage of the bidirectional, blockwise nature of dLLM generation. These draft graphs are calibrated offline to maximize acceptance rates and are dynamically pruned during inference for improved computational efficiency. We present a detailed formulation of Spiffy and demonstrate its ability to accelerate LLaDA, Dream, and SDAR models in combination with KV caching and threshold-based dynamic unmasking leading to up to $8.6\times$ reduction in model inferences and $6.3\times$ acceleration in token rate.

04.
arXiv (quant-ph) 2026-06-16

A New Definition of Quantum Superposition

arXiv:2606.15607v1 Announce Type: new Abstract: The usual description of the superposition of two (pure quantum) states is ambiguous, since the binary operation of summation in a Hilbert space does not pass down to the quotient projective space. Even though Dirac noted this as early as 1930, it is often asserted that the superposition is a binary operation acting on two states with a value that is a unique state. The goal for this note is to motivate a rigorous, geometrical definition of the superposition of states in the setting of complex projective space, which has been argued elsewhere to be the natural geometric phase space for quantum theory. The upshot is that the new definition of the superposition of two pure states, viewed as two distinct points in the projective space, is the unique (complex) line on which those two points lie. Finally, a comparison is given between superposition and expansion in an orthonormal basis.

05.
arXiv (math.PR) 2026-06-17

Diffuse Interface Energies with Microscopic Heterogeneities II: Rare Events

arXiv:2606.17968v1 Announce Type: cross Abstract: We analyze Allen-Cahn functionals with stationary ergodic coefficients in the regime where the length scale $\delta$ of the heterogeneities is much smaller (microscopic) than the interface width $\epsilon$ (mesoscopic). In a companion paper, we show that if the ratio $\epsilon^{-1} \delta$ vanishes fast enough as $\epsilon \to 0$, then the functionals converge to an effective surface energy where the energy density is determined by homogenization effects originating at microscopic scales. Here we prove that if the ratio $\epsilon^{-1} \delta $ vanishes too slowly, the limit of the functional may actually be smaller than this homogenized energy. We refer to this as the rare events regime. In the case of the random checkerboard in dimension one, we use large deviations techniques to give a complete description of the rare events regime, showing that the limiting energy depends in a nontrivial way on the limit of $\epsilon^{-1} \delta | \log \epsilon |$. We further construct, in any dimension, examples of random media in which rare events become relevant at algebraic scales $\delta \approx \epsilon^{1 + \alpha}$ for an arbitrary $\alpha > 0$, as well as almost periodic examples in which atypical configurations play the same role as rare events.

06.
arXiv (CS.CL) 2026-06-17

Your AI Travel Agent Would Book You a Bullfight: An Agentic Benchmark for Implicit Animal Welfare in Frontier AI Models

AI agents are moving from advisors to actors, booking travel, planning menus, and running procurement on behalf of users. Existing benchmarks for AI and animal welfare evaluate model text responses to question-answer prompts, leaving open whether the welfare reasoning surfaced in those responses transfers to agentic deployment where the model must take actions with tools. We introduce TAC (Travel Agent Compassion), the first agentic benchmark measuring whether AI agents avoid options involving animal exploitation when acting on behalf of users. TAC presents an AI agent with twelve hand-authored travel booking scenarios across six categories of animal exploitation, augmented to forty-eight samples to control for price, rating, and position confounds. We evaluate seven frontier models from four labs. Every model scores below the chance level of sixty-four percent, with the best performer (Claude Opus 4.7) at fifty-three percent. A single welfare-aware sentence in the system prompt yields gains of forty-seven to sixty-three percentage points in Claude and GPT-5.5, twenty-six points in GPT-5.2, and under twelve points in DeepSeek and Gemini. An auxiliary Inspect Scout audit of 288 base-condition transcripts from the top two performers, using Gemini 2.5 Flash Lite as judge, flags zero transcripts for evaluation awareness, suggesting the below-chance rates do not stem from the models recognising the evaluation. We discuss implications for category-level variation across cultural domains, the limits of text-response welfare benchmarks, and the EU General-Purpose AI Code of Practice systemic risk framework.

07.
arXiv (CS.AI) 2026-06-11

EKF-Based Depth Camera and Deep Learning Fusion for UAV-Person Distance Estimation and Following in SAR Operations

arXiv:2602.20958v2 Announce Type: replace-cross Abstract: Vision-based Unmanned Aerial Vehicles (UAVs) frameworks aid human search tasks by detecting and recognizing specific individuals, then tracking and following them while maintaining a safe distance. A key safety requirement for UAV following is the accurate estimation of the distance between camera and target object under real-world conditions, achieved by fusing multiple image modalities. As part of the system for automatic people detection and face recognition using deep learning, in this paper we present the fusion of depth camera measurements and monocular camera-to-body distance estimation for robust tracking and following. Deep learning based filtering of depth camera data and estimation of camera-to-body distance from a monocular camera are achieved with YOLO-pose, enabling real-time fusion of depth information using the Extended Kalman Filter (EKF) algorithm. The proposed subsystem, designed for use in drones, estimates and measures the distance between the depth camera and the human body keypoints, to maintain the safe distance between the drone and the human target. Our system provides an accurate estimated distance, which has been validated against motion capture ground truth data. The system has been tested in real time indoors, where it reduces the average errors, RMSE and standard deviations of distance estimation up to 15,3% in three tested scenarios. Based on the test results, the EKF fusion-based approach increases the depth detection range by reducing the errors outside the optimal depth camera working range. It also shows improved robustness and precision in challenging conditions, such as reflections and poor visibility, making it suitable for SAR.

08.
arXiv (CS.CV) 2026-06-16

SGFormer++: Semantic Graph Transformer for Incremental 3D Scene Graph Generation

In this paper, we propose SGFormer++, a novel Semantic Graph Transformer for 3D scene graph generation (SGG), which aims to parse point cloud scenes into semantic structural graphs, where nodes denote detected object instances and edges encode their pairwise relationships, with the core challenge lying in modeling complex global scene structure. While existing graph convolutional network (GCN)-based methods suffer from over-smoothing and limited receptive fields, SGFormer++ leverages Transformer layers as its backbone to enable global message passing. Specifically, we introduce two key components tailored for 3D SGG: (1) a Graph Embedding Layer++ that efficiently integrates edge-aware global context with linear computational complexity, and (2) a Semantic Injection Layer++ that enriches visual features with linguistic priors from large language models (LLMs) and vision-language models (VLMs), boosting semantic representation without introducing extra trainable parameters. To further address the practical challenge of incremental SGG (I-SGG), where new relationship categories arrive sequentially, we equip SGFormer++ with a novel Spatial-guided Feature Adapter, which calibrates predicate features using subject-object spatial geometry to counter scale variation, and a Cascaded Binary Prediction Head that mitigates catastrophic forgetting via task-incremental classifier expansion and logit distillation. Extensive experiments on the 3DSSG benchmark demonstrate that SGFormer++ achieves state-of-the-art performance in both standard and incremental settings: it yields a significant 4.49% absolute improvement in Predicate A@1 under the incremental setting. Code and data are available at: https://github.com/Andy20178/SGFormer.

09.
arXiv (CS.AI) 2026-06-18

Enhancing CVRP Solver through LLM-driven Automatic Heuristic Design

arXiv:2602.23092v2 Announce Type: replace Abstract: The Capacitated Vehicle Routing Problem (CVRP), a fundamental combinatorial optimization challenge, focuses on optimizing fleet operations under vehicle capacity constraints. While extensively studied in operational research, the NP-hard nature of CVRP continues to pose significant computational challenges, particularly for large-scale instances. This study presents AILS-AHD (Adaptive Iterated Local Search with Automatic Heuristic Design), a novel approach that leverages Large Language Models (LLMs) to revolutionize CVRP solving. Our methodology integrates an evolutionary search framework with LLMs to dynamically generate and optimize ruin heuristics within the AILS method. Additionally, we introduce an LLM-based acceleration mechanism to enhance computational efficiency. Comprehensive experimental evaluations against state-of-the-art solvers, including AILS-II and HGS, demonstrate the superior performance of AILS-AHD across both moderate and large-scale instances. Notably, our approach establishes new best-known solutions for 8 out of 10 instances in the CVRPLib large-scale benchmark, underscoring the potential of LLM-driven heuristic design in advancing the field of vehicle routing optimization.

10.
arXiv (quant-ph) 2026-06-17

Tensor network compression using fluid dynamics as a testbed: Analytical foundations in one dimension

arXiv:2606.17064v1 Announce Type: cross Abstract: High performance computers produce extreme-scale data sets that require sampling or compression if they are to be used to their full potential. Existing data compression techniques typically exploit features such as sparsity in the data, homogeneity in the data, or {\it a priori} knowledge of what subsets of data are of most interest. Fluid dynamics data in general do not exhibit these features and so are attractive test beds for generic compression techniques that are objective, robust, and tuneable with respect to information lost due to compression. Presented here is a method based on tensor networks, specifically matrix product states or tensor trains, that meets these requirements. The method is demonstrated for compression in one-dimension and is extensible to higher dimensionality. Lossless compression is demonstrated for random Fourier series for sufficiently high bond dimension of the tensor network, with the memory required to store the tensor network scaling directly proportional to the bond dimension. The lossy compression exhibited at lower bond dimension can be well within the relative error of many fluid simulations. The compression algorithm is tested for the time evolution of Burger's equation with excellent results. We additionally demonstrate the capability to perform computations in the compressed form through a tensor network periodic convolution that can be orders of magnitude faster than using fast Fourier transforms and the convolution theorem. In addition to being an attractive method for working with data sets generated by existing computers, the tensor network methods utilised are directly translatable to the emerging paradigm of quantum computing.

11.
arXiv (CS.CV) 2026-06-16

A Comprehensive Survey of Knowledge-Based Vision Question Answering Systems: The Lifecycle of Knowledge in Visual Reasoning Task

Knowledge-based Vision Question Answering (KB-VQA) extends general Vision Question Answering (VQA) by not only requiring the understanding of visual and textual inputs but also extensive range of knowledge, enabling significant advancements across various real-world applications. KB-VQA introduces unique challenges, including the alignment of heterogeneous information from diverse modalities and sources, the retrieval of relevant knowledge from noisy or large-scale repositories, and the execution of complex reasoning to infer answers from the combined context. With the advancement of Large Language Models (LLMs), KB-VQA systems have also undergone a notable transformation, where LLMs serve as powerful knowledge repositories, retrieval-augmented generators and strong reasoners. Despite substantial progress, no comprehensive survey currently exists that systematically organizes and reviews the existing KB-VQA methods. This survey aims to fill this gap by establishing a structured taxonomy of KB-VQA approaches, and categorizing the systems into main stages: knowledge representation, knowledge retrieval, and knowledge reasoning. By exploring various knowledge integration techniques and identifying persistent challenges, this work also outlines promising future research directions, providing a foundation for advancing KB-VQA models and their applications.

12.
arXiv (quant-ph) 2026-06-17

Demultiplexing Generalized Information via Quantum Transmission Lines

arXiv:2606.17894v1 Announce Type: new Abstract: Demultiplexers are the fundamental primitives of network architecture, enabling perfect routing of an input classical signal to a designated one, among multiple output ports. Quantum transmission lines, having access to the quantum systems directly, are able to transmit both the classical and quantum information encoded in quantum systems. A natural question therefore emerges that whether the scrambled classical and quantum information in a quantum system can be perfectly demultiplexed in the designated classical and quantum output ports? Here we answer this question by introducing a quantum to quantum-classical device, namely the quantum demultiplexer (Q-DEMUX). We characterize the class of Q-DEMUXs enabling perfect routing of both the classical and the quantum information along with their simple circuit realizations. Our results highlight an explicit connection between the strength of a Q-DEMUX with the incompatibility of quantum instruments. Finally, we extend the notion in a stronger variant where the sender is oblivious regarding the nature of the data to be transmitted through the Q-DEMUX.

13.
arXiv (CS.AI) 2026-06-19

Dual-Agent Framework for Cross-Model Verified Translation of Natural-Language Protocols into Robotic Laboratory Platform

arXiv:2606.20120v1 Announce Type: cross Abstract: Biological experiment protocols are written in natural language, whereas automation systems rely on predefined control commands, creating a semantic gap that limits autonomous execution. Microplate-based automatic experiments are particularly challenging due to the need to simultaneously control well mapping, sample-reagent combinations, replicate placement, and parallel dispensing. This study proposes an agent-based protocol translation framework that converts natural-language microplate-based protocols into executable control commands for a robotic laboratory platform. A Parser Agent formalizes the natural-language protocol into a structured representation, and a rule-based mapping engine deterministically incorporates the operational constraints of the robotic laboratory platform to generate device-level control commands. A heterogeneous LLM Validation Agent verifies completeness, parameter accuracy, and execution order, and triggers a self-correction loop with structured feedback when errors are detected. A sweep involving 7 Parsers and 3 Validators on randomly selected ELISA protocols evaluates how model scale and Validator type affect translation accuracy and pass rates under cross-model verification. The accuracy-latency trade-off is further verified by comparing the rule-based mapping of the proposed framework with LLM end-to-end direct mapping. Finally, Bradford assay-based protein quantification using a microplate was demonstrated on a robotic laboratory platform, validating end-to-end autonomous execution from natural-language protocols to real-world experiments. The proposed framework provides a flexible approach to narrowing the semantic gap between natural-language protocols and microplate-based self-driving laboratories.

14.
arXiv (CS.AI) 2026-06-11

Sparse probes and murky physics: a case study of interpretability challenges in a foundation model for continuum dynamics

arXiv:2606.11657v1 Announce Type: cross Abstract: Generative AI emulators are increasingly used in scientific domains where we already have strong theory, benchmarks, and physical intuition. This raises a central evaluation and interpretability question: when a foundation-style model can reproduce known continuum dynamics, what internal mechanism supports that behavior, is the internal behaviour consistent with known physics, and how does it relate to where the emulator succeeds or fails? We investigate a cross-domain foundation model for continuum dynamics, Walrus by Polymathic, using mechanistic interpretability guided by physical principles. We apply a sparse autoencoder (SAE) to probe a selected layer, and address the practical challenge of triaging a large feature set (over 20,000) using enstrophy as a physically grounded metric. As a deliberately simple testbed, we focus on shear flow and compare feature recruitment across multiple shear-flow setups, i.e. parameter values in the numerical simulation. Across setups we find evidence of piecewise consistency, with subsets of features recurring in similar roles, but this structure is intermittent and does not map cleanly onto standard physical decompositions. In parallel, direct comparisons between numerical simulation and the emulator reveal systematic output-level discrepancies, including regimes where energy/structures become too diffuse or too localized. We connect parts of these discrepancies to changes in specific SAE feature usage. Our work highlights open questions for scientific foundation models: how to robustly prioritize mechanistically meaningful features, how to separate stable structure from analysis artifacts (including single-layer and SAE limitations), and how to use established benchmarks to decide when "different" internal representations are genuinely informative rather than merely effective.

15.
arXiv (quant-ph) 2026-06-11

Fabricating fiber cavity mirror substrates compatible with high coupling efficiency

arXiv:2606.12168v1 Announce Type: cross Abstract: Fiber optical cavities offer small mode volumes and correspondingly strong light-matter interactions in an open Fabry-Perot geometry. However, existing fabrication techniques do not reliably produce substrates with surface profiles amenable to high mode matching between the cavity mode and fiber core, thereby limiting the achievable collection efficiency. Here we present a technique to fabricate fiber mirror substrates while using $in situ$ reflectometry to constrain the achievable mode matching prior to coating. By measuring the back-reflection from freshly cleaved fiber tips, we pre-select 138 fibers compatible with 96.5-99.5% mode matching, and after a single CO$_2$ laser ablation pulse, these fibers remained compatible with 95.3-99.2\%. This simple technique provides rapid feedback during each stage of substrate fabrication, greatly enhancing the yield of viable fiber mirror substrates prior to (expensive) coating runs.

16.
arXiv (CS.CV) 2026-06-19

SSD: Spatially Speculative Decoding Accelerates Autoregressive Image Generation

Autoregressive models excel in visual generation by treating images as 1D sequences of discrete tokens, mirroring language modeling. However, this flattening discards the intrinsic 2D spatial locality of visual signals, creating severe computational bottlenecks during inference. We introduce Spatially Speculative Decoding (SSD), a framework that aligns the predictive objective with the natural geometry of images. Rather than predicting only the immediate next token in a 1D sequence, our model simultaneously predicts the adjacent horizontal token and the token directly below it. By capitalizing on this 2D spatial correlation, spatially speculative decoding overcomes the memory wall in visual inference. Our approach accelerates autoregressive image generation by up to 13.3x while maintaining high fidelity on DPG-Bench and GenEval. Our results suggest that respecting the underlying geometry of vision unlocks massive computational efficiencies, paving the way for real-time, high-resolution autoregressive generative models.

17.
arXiv (quant-ph) 2026-06-16

Diagonal-Budgeted Trotterization for Efficient Quantum Hamiltonian Simulation

arXiv:2606.16959v1 Announce Type: new Abstract: Efficient classical simulation of quantum Hamiltonian dynamics is often bottlenecked by exponential state growth and the overhead of generic sparse linear algebra. We introduce diagonal-budgeted Trotterization, a structure-aware strategy that decomposes Hamiltonians into factors preserving diagonal sparsity while tightly controlling fidelity loss. Our implementation, HamSim, utilizes a compact diagonal-sparse data layout and specialized C++/CUDA kernels to bypass the overheads of generic formats like CSR. By leveraging SIMD vectorization, multithreading, and GPU acceleration, HamSim achieves high performance across heterogeneous architectures. Benchmarks on the HamLib suite show that HamSim significantly outperforms Qiskit-Aer. On CPUs, HamSim attains speedups of $182$–$1,269\times$ on optimization instances (TSP, MaxCut) and $4.8$–$841\times$ on physical models (TFIM, Heisenberg). On GPUs, it achieves up to $178\times$ speedup for $12$–$16$ qubit problems. Unlike traditional Trotterization, HamSim maintains near-perfect fidelity without requiring exponential steps. This demonstrates that diagonal-aware numerical kernels provide a scalable foundation for high-fidelity classical Hamiltonian simulation.

18.
arXiv (quant-ph) 2026-06-11

Shadow Engineering of Quantum Processes

arXiv:2606.12035v1 Announce Type: new Abstract: Characterizing quantum processes is essential for hardware benchmarking, error diagnosis, and algorithm verification. While recent work [PRX QUANTUM 4, 040337 (2023)] extended classical shadows from quantum state to quantum process, enabling efficient single-channel $\mathcal{E}$ property prediction, its applicability to composite processes $f(\mathcal{E}_1, \mathcal{E}_2,\cdots, \mathcal{E}_k)$ remains unexplored. We introduce shadow engineering, a framework encoding the classical shadows of processes into sparse transfer matrices to predict $f(\mathcal{E}_1, \mathcal{E}_2,\cdots, \mathcal{E}_k)$ properties with proven polynomial sample complexity, matching single-channel efficiency while exponentially lower than quantum process tomography. Crucially, this approach repurposes existing $\mathcal{E}_m$-shadow data without physical execution of $f(\mathcal{E}_1, \mathcal{E}_2,\cdots, \mathcal{E}_k)$, enabling flexible quantum process characterization with minimal hardware overhead. We demonstrate the framework's effectiveness and practicality on a superconducting quantum processor for typical applications such as error mitigation and Hamiltonian dynamical simulation. This framework unlocks new capabilities for predicting complex quantum behaviors without physical re-execution, with immediate applications in near-term device calibration and quantum simulation.

19.
arXiv (CS.CL) 2026-06-16

Risk-Aware LLM Agents for Geospatial Data Retrieval: Design and Preliminary Adversarial Evaluation

We present an LLM-driven framework for retrieving remote sensing data from cloud-based geospatial catalogues using natural language queries. The system converts user intent into structured API calls, enabling efficient access to satellite imagery and environmental datasets. The architecture integrates three agents: Guardrail for safety and policy enforcement, General-QA for intent interpretation, and Recommender-Analyst for schema-aware API call generation. This coordinated design ensures reliable, semantically aligned interaction with external data services. The modular framework is portable across platforms through API schema substitution and supports applications in environmental monitoring, disaster response, and climate analysis. It establishes a scalable interface between user intent and geospatial infrastructure, enabling streamlined and automated Earth observation workflows. Preliminary experiments under adversarial multi-turn settings show that prompt-level safety instructions improve robustness, although rare high-impact failures persist in API manipulation scenarios and highlight the need for adaptive, system-level defenses that balance safety, usability, and cost efficiency, which motivates the use of our intercept-level Guardrail agent.

20.
arXiv (CS.LG) 2026-06-16

Model Stealing Through the Lens of Model Multiplicity

arXiv:2606.15493v1 Announce Type: new Abstract: Model stealing attacks, where adversaries create high-fidelity surrogate models, are a significant threat to the intellectual property of machine learning services. Conventional wisdom suggests these surrogates could provide adversaries with economic leverage comparable to the original service providers. This paper challenges this assumption by evaluating model stealing attacks beyond mere fidelity to the target model. Because query-based extraction provides only partial supervision of the target's input-output behavior, the surrogate is not uniquely identified: many near-optimal surrogates can achieve comparable fidelity while differing in deployment-relevant properties. Instead of performing a classic learning-based model stealing attack, we compute the Rashomon Set (i.e., the set of almost-equally-accurate models) of surrogate models, and evaluate its diversity using multiplicity metrics (ambiguity, discrepancy, and Rashomon Capacity) and group fairness metrics. Across tabular, medical imaging, and NLP tasks, our experiments on real-world datasets reveal that despite exhibiting similar fidelity to the target model, surrogate models can display significant variances in other critical performance metrics. These findings cast doubt on the presumed equivalence between high-fidelity surrogates and the target model in practical deployment scenarios.

21.
arXiv (CS.CV) 2026-06-16

Double-Helix Vision (DH-V2): A Geometry-Based Visual Sampler for Bandwidth-Constrained Perception

作者:

We present Double-Helix Vision (DH), a geometry-based visual sampler that compresses 2D images into compact 1D signals using paired golden-ratio-inspired spiral trajectories. Rather than processing every pixel uniformly, DH employs two phase-shifted helices (Alpha and Beta, offset by 180 degrees) to sample the image with biologically-inspired foveation: high density at the center, sparse coverage at the periphery. At 4K resolution, DH achieves a 1,433x compression ratio (99.93% reduction) while preserving the geometric structure of the scene. The full perception pipeline – including spatial mapping, temporal collision detection, and intra-frame structural disparity estimation – runs in 0.52 ms at 1080p on CPU-only hardware, with no neural network dependencies. On CIFAR-10 at extreme sampling budgets (K=128 points per helix), DH achieves a +6.03% accuracy gain over uniform random sampling. A JSON-serializable Robotics API is provided, delivering sub-millisecond spatial perception reports in 2.7 KB packets. Code and benchmarks are available under the MIT License.

22.
arXiv (CS.CL) 2026-06-12

ProPlay: Procedural World Models for Self-Evolving LLM Agents

Self-evolving agents are expected to improve through interaction without external supervision, but this remains difficult in partially observable environments where agents must explore actively, learn from limited feedback, and decide when to trust prior experience. Existing LLM-agent methods often rely on memory or planning modules, yet they rarely close the loop between them to continually refine an internal understanding of environment dynamics. We introduce ProPlay, a procedural world model that supports procedure-level preplay, where agents can rehearse future procedural paths using the learned world knowledge. Rather than representing experience as isolated rules or low-level action constraints, ProPlay abstracts successful trajectories into procedures and organizes them in a procedure graph that captures causal transitions among task stages. Each transition is associated with a reliability record embedding to estimate its task-specific contribution from past outcomes. Before each episode, ProPlay simulates future procedural trajectories over known graph structures as structured soft guidance; after execution, it refines the graph using environment feedback. Experiments on public benchmarks show that ProPlay consistently improves environment understanding and self-evolution capability over strong baselines. Our code has been released in https://github.com/antman9914/proplay.

23.
arXiv (CS.LG) 2026-06-12

Strategic PAC Learnability via Geometric Definability

arXiv:2605.13426v3 Announce Type: replace Abstract: Strategic classification studies learning settings in which individuals can modify their features, at a cost, in order to influence the classifier's decision. A central question is how the sample complexity of the induced (strategic) hypothesis class depends on the complexities of the underlying hypothesis class and the cost structure governing feasible manipulations. Prior work has shown that in several natural settings, such as linear classifiers with norm costs, the induced complexity can be controlled. We begin by showing that such guarantees fail in general - even in simple cases: there exist hypothesis classes of VC dimension $1$ on the real line such that, even under the simplest interval neighborhoods, the induced class has infinite VC dimension. Thus, strategic behavior can turn an easy learning problem into a non-learnable one. To overcome this, we introduce structure via a geometric definability assumption: both the hypothesis class and the cost-induced neighborhood relation can be defined by first-order formulas over $\mathbb{R}_{\mathtt{exp}}$. Intuitively, this means that hypotheses and costs can be described using arithmetic operations, exponentiation, logarithms, and comparisons. This captures a broad range of natural classes and cost functions, including $\ell_p$ distances, Wasserstein distance, and information-theoretic divergences. Under this assumption, we prove that learnability is preserved, with sample complexity controlled by the complexity of the defining formulas.

24.
arXiv (CS.CV) 2026-06-15

ADAPT: An Autonomous Forklift for Construction Site Operation

Efficient material logistics play a critical role in controlling costs and schedules in the construction industry. However, manual material handling remains prone to inefficiencies, delays, and safety risks. Autonomous forklifts offer a promising solution to streamline on-site logistics, reducing reliance on human operators and mitigating labor shortages. This paper presents the development and evaluation of ADAPT (Autonomous Dynamic All-terrain Pallet Transporter), a fully autonomous off-road forklift designed for construction environments. Unlike structured warehouse settings, construction sites pose significant challenges, including dynamic obstacles, unstructured terrain, and varying weather conditions. To address these challenges, our system integrates AI-driven perception techniques with traditional approaches for decision making, planning, and control, enabling reliable operation in complex environments. We validate the system through extensive real-world testing, comparing its continuous performance against an experienced human operator across various weather conditions. Our findings demonstrate that autonomous outdoor forklifts can operate near human-level performance, offering a viable path toward safer and more efficient construction logistics.

25.
arXiv (CS.LG) 2026-06-19

Self-Adaptive Scale Handling for Forecasting Time Series with Scale Heterogeneity

arXiv:2606.20010v1 Announce Type: new Abstract: Current time series forecasting (TSF) research predominantly focuses on scale-homogeneous data, where different time series share similar numerical magnitude ranges. However, in real-world industrial scenarios such as financial product sales, different time series often differ by orders of magnitude (scale heterogeneity). Since these series share similar temporal patterns, joint modeling is desirable for better data utilization, yet existing scaling methods either compress low-scale signals (global normalization) or destroy semantic discriminability and amplify inverse-scaling errors (window-based scaling). This paper proposes a self-Adaptive Scale-handling (AS) module that learns adaptive scale factors tailored to each input, preserving semantic discriminability while reducing inverse-scaling errors. AS consists of Scale Calibrating (SC), which calibrates prior mean scaling factors through neural networks, and Scaling Selection (SS), which decides whether to apply calibration or retain the original factor, avoiding over-calibration. Experiments on real-world fund sales datasets from Ant Fortune and Alipay show that AS seamlessly integrates into popular TSF models and consistently improves their performance. The code and dataset are available at the link https://github.com/Meteor-Stars/ASTSF.