Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.CL) 2026-06-11

Soft-Prompt Tuning for Fair and Efficient LLM Benchmark Evaluation

Benchmark scores often misrepresent a large language model's (LLM's) knowledge, because they rely, e.g., on the model's ability to follow specific formatting requirements. This especially penalizes base models that may know the correct answers but lack the ability – typically introduced in post-training – to structure them as instructed. To overcome this, we propose soft-prompt tuning, an efficient, fair, and architecture-agnostic model evaluation. By optimizing only 10 soft-prompt vectors (roughly 0.0006% parameters for a 7B model) over a short tuning period, we adapt models to specific benchmark formats, closing gaps in format-following and ensuring that underlying knowledge is accurately reflected in benchmark scores. This allows one to fairly compare different base models – trained with various pre-training recipes – on benchmarks without the need for full post-training. We evaluated soft-prompt tuning across 7 models and 7 datasets. The results show that (a) soft-prompt tuning saturates format-following within 80 steps (~640 samples) making it highly efficient, (b) soft-prompt tuning significantly outperforms zero- and few-shot prompting, surfacing base model knowledge that standard prompting misses, that (c) even post-trained models can benefit from soft-prompts to maximize format compliance, and that (d) soft-prompted base model performance predicts post-trained model rankings more reliably than zero- and few-shot baselines, offering a low-cost proxy for downstream model quality. Our contributions include (1) metrics which disentangle format-following and knowledge accuracy, (2) a fairer benchmarking protocol of LLM knowledge, and (3) a cost- and memory-effective recipe to identify optimal pre-training strategies early in LLM development.

02.
arXiv (CS.LG) 2026-06-16

Bayesian Optimization for Learning Nonlinear MPC in Autonomous Agent Navigation

arXiv:2606.14763v1 Announce Type: cross Abstract: Real-time autonomous navigation in dynamic, unknown environments remains a fundamental challenge for mobile robotics. We propose a map-free framework that tightly integrates reactive rolling-horizon planning with nonlinear Model Predictive Control (MPC). At each control cycle, a LiDAR-based Gaussian occupancy representation is constructed and used to generate collision-free trajectories via A* search, which are then tracked by a CasADi/IPOPT MPC formulation incorporating a smooth sigmoid obstacle barrier. To improve robustness to parameter sensitivity, we adopt an offline Bayesian optimization scheme based on Tree-structured Parzen Estimators (TPE), which identifies near-optimal controller parameters with respect to a composite navigation objective. In addition, a Gaussian Process surrogate is used to analyze parameter sensitivity and provide insight into the optimization landscape. The proposed framework is robot-agnostic and is evaluated on the Unitree Go2 quadruped in simulation using Gazebo, followed by deployment on the physical robot. Experimental results show that parameters tuned in simulation transfer effectively to hardware, maintaining comparable performance without additional tuning. The full system achieves up to a 90.0\% navigation success rate when deployed, along with a 38.9\% average improvement in the evaluation metrics across simulated environments.

03.
arXiv (CS.AI) 2026-06-11

TileFuse: A Fused Mixed-Precision Kernel Library for Efficient Quantized LLM Inference on AMD NPUs

arXiv:2606.11357v1 Announce Type: cross Abstract: With the growing demand for on-device LLM inference, edge SoCs increasingly integrate NPUs to improve performance and energy efficiency under tight power and thermal budgets. However, practical LLM deployment on current client NPUs remains difficult: widely used quantization formats such as AWQ do not map cleanly onto many existing NPU software stacks, which are often proprietary and expose limited low-level control. In this work, we present TileFuse, a close-to-metal mixed-precision kernel library for AMD XDNA2 NPUs that targets transformer linear layers in quantized LLM inference. TileFuse brings practical low-bit formats such as AWQ-style W4A16 and W8A16 directly onto XDNA2, rather than forcing the model to be reshaped around an NPU-specific quantization scheme. TileFuse co-designs weight layout, metadata placement, mixed-precision microkernels, and array-level dataflow. Specifically, it fuses unpacking, dequantization, and GEMM/GEMV execution into a single kernel flow, introduces an interleaved pre-tiling layout that supports GEMM dimensions up to 32K, and redesigns GEMV dataflow to utilize the full 4x8 AIE array. Across kernel-level evaluations, TileFuse improves performance by up to 121.6% for GEMM and 281% for GEMV over full-precision baselines, while delivering more than 2x performance and energy-efficiency gains over strong iGPU baselines on GEMM. In end-to-end LLM experiments on Ryzen AI laptops, TileFuse achieves up to 2.0x lower prefilling latency with more than 64.6% lower energy consumption. Together, these results show that XDNA2 is a practical target for AWQ-style edge LLM inference and that native NPU support for off-the-shelf quantization can make NPUs substantially more usable in real client deployments.

04.
arXiv (CS.AI) 2026-06-12

BASENet: Band-Adapted Speech Enhancement Network with Cross-Band Attention

arXiv:2606.12662v1 Announce Type: cross Abstract: Speech enhancement models typically apply uniform capacity across all frequencies, disregarding the non-uniform spectral resolution of human hearing. We propose BASENet, a frequency-adapted architecture that partitions the spectrum into Bark-scale bands and assigns each a scaled-capacity encoder derived from critical-band density, automatically granting deeper branches to perceptually dense low frequencies and lighter ones to high frequencies. A cross-band attention module captures harmonic dependencies across bands through compact frequency-pooled representations at linear complexity. Built on inverted residual blocks with dense connectivity and a convolutional recurrent network, BASENet achieves 3.55 PESQ and STOI~96% on VoiceBank+DEMAND with only 0.83M parameters and 7.3 G~MACs, the fewest parameters among all methods with PESQ > 3.50. A causal variant (3.44 PESQ) surpasses several non-causal baselines, confirming suitability for real-time streaming on resource-constrained devices.

05.
bioRxiv (Bioinfo) 2026-06-10

Promera: a unified model for biomolecular structure prediction, filtering, and design

Generative models have become staple tools for modeling and designing biomolecular structures. However, although these tools have improved in structural prediction accuracy, their ability to filter designed binders—an essential use case—remains insufficient; whereas design methods have focused more on unconstrained binder generation rather than capabilities enabled by controllable design. We introduce Promera, a unified generative model that combines all-atom structure prediction with improved filtering and controllable design. We find that Promera's confidence metrics are more accurate for filtering binders from non-binders for both miniproteins and nanobodies, while its co-folding performance surpasses popular open-source models (OpenFold3-p2, Boltz-2) on therapeutically relevant categories. As a design model, Promera generates binders by predicting masked protein sequences with optional epitope, paratope, and template constraints. Remarkably, our nanobody designs match the in silico success rates from backprop-based techniques (mBER) when evaluated under co-folding confidence filters. We further provide two in silico demonstrations of the the versatile capabilities of our design method: epitope targeting of the Andes hantavirus glycoprotein with VHHs and active state stabilization of the beta-2 andrenergic GPCR. We conclude by proposing a scaling law for co-folding models, suggesting a path for further performance improvement.

06.
arXiv (CS.CL) 2026-06-16

EHRNote-ChatQA: A Benchmark for Evidence-Grounded Multi-Turn Clinical Question Answering over Longitudinal Discharge Summaries

Discharge summaries are crucial clinical documents containing the context of a patient's overall hospital stay, and are routinely reviewed by medical experts for patient readmission, ongoing care, and diagnostic decision-making. When reviewing them, medical experts often must iteratively synthesize information across multiple summaries while verifying the evidence supporting each answer. Although large language models (LLMs) are increasingly explored for clinical question answering, existing benchmarks do not sufficiently reflect this setting: they often evaluate exam-style medical knowledge or focus on single-turn question answering with limited evidence-grounding evaluation. We introduce EHRNote-ChatQA, the first benchmark for evidence-grounded multi-turn clinical question answering over patients' multiple discharge summaries. Built from de-identified MIMIC-IV discharge summaries, EHRNote-ChatQA contains 967 patient-level multi-turn samples spanning one to five notes and 16,072 medical-expert-verified QA pairs (8,036 content questions, each paired with an evidence-grounding question) across eight clinical categories. The benchmark is constructed through an expert-informed pipeline combining discharge-summary structuring schema, expert-curated multi-turn QA templates, and LLM-based generation, followed by review and revision of every single QA sample by 11 medical experts. Benchmarking 22 open- and closed-source LLMs reveals several challenges, including that LLMs struggle more with evidence grounding than content answering, multi-turn errors compound across turns, and single-turn clinical QA performance does not reliably transfer to this setting. These findings establish EHRNote-ChatQA as a rigorous and practical benchmark for evaluating clinical QA systems. The dataset will be made publicly available through PhysioNet credentialed access.

07.
Nature Medicine 2026-06-10

Dual-target gene therapy in Parkinson’s disease: a multicenter phase 1 trial

作者:

Restoring striatal dopamine synthesis is a promising gene therapy strategy for Parkinson’s disease. Previous adeno-associated virus-mediated aromatic L-amino acid decarboxylase (AADC) monotherapies remain dependent on exogenous levodopa, whereas multigene delivery is constrained by strict adeno-associated virus packaging limits. A ‘dual approach’ targeting the two rate-limiting enzymes, tyrosine hydroxylase (TH) and AADC, offers the potential for autonomous dopamine synthesis. We report the 12-month primary safety and tolerability outcomes of a multicenter, open-label, dose-escalation, phase 1 trial evaluating BBM-P002, a new adeno-associated virus vector—AAVT42—codelivering constitutively active TH and AADC. Ten participants with moderate-to-advanced Parkinson’s disease were enrolled and received bilateral intraputaminal infusions across doses of 4.0 × 1011 vg (Cohort 1; n = 1), 6.0 × 1011 vg (Cohort 2; n = 2), 1.0 × 1012 vg (Cohort 3; n = 2) and 1.2 × 1012 vg (Cohort 4; n = 5). The trial achieved its primary outcome, as BBM-P002 demonstrated a favorable safety and tolerability profile within 12 months post-treatment. No dose-limiting toxicities or drug-related serious adverse events occurred. A total of 23 adverse events were reported, all judged unrelated to BBM-P002 and primarily mild and transient. Systemic toxicity and clinically meaningful immunogenicity were absent. In conclusion, intraputaminal delivery of BBM-P002 was safe and well tolerated in this phase 1 trial, supporting continued clinical development. ClinicalTrials.gov registration: NCT05822739 . Phase 1 results reveal that BBM-P002, a dual-target gene therapy co-delivering TH and DDC, is safe and well tolerated in Parkinson’s disease, with 12-month motor improvements signaling therapeutic potential.

08.
arXiv (CS.CV) 2026-06-12

MoVerse: Real-Time Video World Modeling with Panoramic Gaussian Scaffold

We present MoVerse, a real-time video world model that creates an interactively navigable scene from a single narrow-field-of-view image. This setting is challenging because the input observes only a small fraction of the environment, while interactive roaming requires a complete surrounding world, persistent geometry, controllable camera motion, and temporally coherent high-fidelity observations. MoVerse addresses this problem by separating world construction from observation rendering. It first expands the input into a gravity-aligned 360$^\circ$ panorama with topology-aware diffusion, closing the missing field of view before 3D reasoning. It then lifts the panorama into a persistent 3D Gaussian scaffold using panoramic geometry-aware residual prediction, yielding a dense and directly renderable spatial memory. Finally, a Gaussian-conditioned video renderer translates scaffold renderings along user-specified camera trajectories into photorealistic video. To make this renderer practical for interaction, we train a bidirectional diffusion teacher for high-quality conditional rendering and distill it into a causal autoregressive student for bounded-latency streaming. This design combines the controllability and long-range consistency of explicit 3D representations with the perceptual quality of generative video models. MoVerse supports real-time scene roaming at 8~FPS on a single NVIDIA RTX~4090 GPU, demonstrating a practical path toward single-image world creation with interactive video output.

09.
arXiv (CS.AI) 2026-06-16

RecourseBench: A Modular Framework for Reproducible Algorithmic Recourse Evaluation

arXiv:2606.16113v1 Announce Type: new Abstract: Algorithmic recourse methods provide counterfactual explanations that inform individuals of the actions required to overturn an unfavorable model decision. Despite rapid methodological progress, principled comparison remains elusive; existing frameworks are often difficult to extend and lack both interoperability and systematic verification that integrated methods faithfully reproduce their originally reported results. We introduce RecourseBench, a unified evaluation framework built around three commitments namely, modularity, reproducibility, and interactivity. The framework decomposes the pipeline into five fully decoupled layers – Data, Preprocessing, Model, Recourse Method, and Evaluation – governed by abstract interfaces and a dynamic registry. To address the reproducibility gap in prior benchmarks, we introduce a four-tier classification system in which every integrated method is validated by an automated test suite against its originally reported results. We further provide an interactive web interface for flexible, configuration-driven comparison across methods, datasets, and model architectures. Our framework currently integrates 28 state-of-the-art recourse methods and, to our knowledge, constitutes the first recourse benchmark to explicitly enforce method-level reproducibility through automated, quantitative testing.

10.
arXiv (CS.CL) 2026-06-15

Fractured Chain-of-Thought Reasoning

Inference-time scaling techniques have significantly bolstered the reasoning capabilities of large language models (LLMs) by harnessing additional computational effort at inference without retraining. Similarly, Chain-of-Thought (CoT) prompting and its extension, Long CoT, improve accuracy by generating rich intermediate reasoning trajectories, but these approaches incur substantial token costs that impede their deployment in latency-sensitive settings. In this work, we first show that truncated CoT, which stops reasoning before completion and directly generates the final answer, often matches the full CoT sampling while using dramatically fewer tokens. Building on this insight, we introduce Fractured Sampling, a unified inference-time strategy that interpolates between full CoT and solution-only sampling along three orthogonal axes: (1) the number of reasoning trajectories, (2) the number of final solutions per trajectory, and (3) the depth at which reasoning traces are truncated. Through extensive experiments on five diverse reasoning benchmarks and several model scales, we demonstrate that Fractured Sampling consistently achieves superior accuracy-cost trade-offs, yielding steep log-linear scaling gains in Pass@k versus token budget. Our analysis reveals how to allocate computation across these dimensions to maximize performance, paving the way for more efficient and scalable LLM reasoning. Code is available at https://github.com/BaohaoLiao/frac-cot.

11.
arXiv (CS.LG) 2026-06-16

DP-Hype: Federated Differentially Private Hyperparameter Search

arXiv:2510.04902v3 Announce Type: replace Abstract: Tuning hyperparameters in federated machine learning can substantially impact model performance. When hyperparameters are tuned on sensitive data, privacy becomes an important challenge and to this end, differential privacy has emerged as the de facto standard for provable privacy. A standard setting in federated learning is that clients agree on a shared setup, i.e., find a compromise from a set of hyperparameters, like a model's learning rate. Yet, prior work on privacy-preserving hyperparameter tuning is tailored to specific learning tasks, does not account for the privacy leakage of aggregated results, or offers a sub-optimal privacy-utility trade-off. In this work, we present our algorithm DP-Hype, which performs a federated and privacy-preserving hyperparameter search by conducting a federated voting based on local hyperparameter evaluations of clients. In this way, DP-Hype selects hyperparameters that lead to a compromise supported by a majority of clients, while maintaining scalability and independence from specific learning tasks. We prove that DP-Hype preserves the strong notion of differential privacy called client-level differential privacy and, importantly, show that its privacy guarantees do not depend on the number of hyperparameters. We also provide bounds on its utility guarantees, that is, the probability of finding good hyperparameters, and implement DP-Hype as a submodule in the popular Flower framework for federated machine learning. In addition, we evaluate performance on multiple benchmark data sets in iid as well as multiple non-iid settings and demonstrate high utility of DP-Hype even under small privacy budgets.

12.
arXiv (quant-ph) 2026-06-15

The Bilateral Efficiency of Ethernet: Recalibrating Metcalfe and Boggs After Fifty Years

作者:

arXiv:2603.19406v2 Announce Type: replace-cross Abstract: In July 1976, Metcalfe and Boggs published their foundational paper on Ethernet in Communications of the ACM. Their efficiency model – E = (P/C)/(P/C + W*T) – measures the fraction of Ether time carrying good forward packets under contention. For fifty years this model has framed how the community thinks about Ethernet performance. We argue it is silent on the question that matters for modern intra-rack interconnect: bilateral transaction efficiency – the fraction of link time that produces committed agreements between sender and receiver. Metcalfe and Boggs themselves planted the seed in their EFTP "end-dally" protocol (Section 7.2.2), and the deeper anchor is older still: Abramson's Alohanet carried positive acknowledgments at the link layer – a bilateral mechanism Metcalfe consciously removed in 1973 to obtain Ethernet's simple, ACK-free packet format. The result is a fifty-year bilateral zigzag: Aloha (bilateral) to Ethernet (unilateral) to the EFTP end-dally (bilateral) to TCP (unilateral-with-bilateral-above). We formalize bilateral efficiency, connect it to the back-to-back Shannon channel with Perfect Information Feedback, and – scoping the claim explicitly to intra-rack distances of one meter or less – describe how the Open Aethernet link recovers mutual knowledge at the link layer. The correction to Table 1 is not a different set of numbers. It is a different question.

13.
medRxiv (Medicine) 2026-06-16

Cardiac positronium lifetime in human PET: a reproducible right-left ventricular contrast that is not explained by blood oxygenation

Background. Ortho-positronium (o-Ps) lifetime, now measurable in vivo on long-axial-field-of-view (LAFOV) PET/CT, has been proposed as a biomarker of tissue oxygenation and hypoxia. Because o-Ps lifetime is dominated by tissue free-volume structure while the oxygen- specific contribution is small, whether an in-vivo lifetime contrast reflects oxygenation rather than anatomy is an open, identifiability-limited question. Aim. To test the oxygenation hypothesis directly using the heart's natural arterial/venous oxygenation contrast, with a built-in anatomical control. Methods. We re-analysed a public [82Rb]Cl human cardiac LAFOV PET/CT dataset (5.30 x 10^8 evaluated three-photon events). Per-compartment o-Ps lifetimes were extracted with a background-plus-two-component exponentially-modified-Gaussian (EMG) model. The list-mode to image mapping and right/left ventricle (RV/LV) identity were established lifetime-free (the mapping reproduces the provider's reconstructed image at block-correlation 0.998 and wins a joint multi-organ alignment panel). We applied a confound battery: registration stress test, blood-core vs wall, lung-air and wall-myocardium partial-volume, tissue density; and a structure/position-matched control (pulmonary artery, deoxygenated, vs aorta, oxygenated). An isotope-matched 82Rb uniform-quartz reference bounded the instrument's positional behaviour. All results were produced by two independent analysis pipelines. Results. RV o-Ps lifetime exceeded LV by delta tau = +0.304 ns (RV 1.700 +/- 0.172, LV 1.396 +/- 0.130 ns; about 1.4 sigma), in the oxygen-expected direction; the contrast was stable across +/-16 mm registration perturbation (sign preserved in 100% of 342 shifts) and resided in the blood core, not the wall. However, the matched-vessel control was null: pulmonary artery minus aorta = -0.011 +/- 0.344 ns. Lung-air and wall-myocardium partial-volume were disfavoured, and the effect fell within the isotope-matched 82Rb instrumental positional envelope (about 0.1-0.35 ns over 40 mm in uniform material). Conclusion. On this single subject, the cardiac o-Ps lifetime contrast does not provide a clean readout of blood oxygenation: an oxygenation effect of the observed (about 0.3 ns) magnitude is ruled out by the matched control, while a small physiological effect cannot be excluded. We provide a reusable confound-control battery for evaluating future in-vivo o-Ps oxygenation claims. Multi-subject replication with anatomy decoupled from oxygenation is required.

14.
arXiv (math.PR) 2026-06-11

Exact Fourier dimensions of dyadic Mandelbrot cascades on curves of nonvanishing curvature under minimal integrability

arXiv:2606.11758v1 Announce Type: new Abstract: We prove an exact Fourier-dimension formula for scalar dyadic Mandelbrot cascades pushed forward to fixed C^2 Jordan curves with nonvanishing curvature. Let W be in the minimal Kahane-Peyriere regime, let the scalar dyadic cascade live on T = R/Z, and let gamma map T to R^2 be a fixed C^2 Jordan curve with nonvanishing curvature, parametrized at constant speed. For the push-forward measure mu_gamma, we prove that, almost surely on non-extinction, its Fourier dimension is A_loc(W), the usual local exponent obtained by optimizing over q>1 from the moment expression involving E[W^q]. The upper bound follows from the scalar circle local-dimension theorem, bi-Lipschitz transfer to the fixed curve, and a deterministic curved-support obstruction for Fourier dimension. The lower bound follows from a fixed-curve finite-r annular theorem, which gives summable annular Fourier decay under a single finite moment witness. The main analytic input is a deterministic phase-geometry package for fixed nondegenerate C^2 curves: stationary tubes, derivative bands, and phase-bin coefficient estimates replacing the explicit trigonometric structure available on the unit circle.

15.
arXiv (CS.LG) 2026-06-18

Unlocking air traffic flow prediction through microscopic aircraft-state modeling

arXiv:2605.10083v2 Announce Type: replace Abstract: Short-term air traffic flow prediction in terminal airspace is essential for proactive air traffic management. Existing approaches predominantly model traffic flow as aggregated time series. However, traffic dynamics are governed by aircraft states and their interactions in continuous airspace. Such aggregation obscures fine-grained information, including aircraft kinematics, boundary interactions, and control intent. Here we present AeroSense, a state-to-flow modeling paradigm that predicts future traffic flow directly from instantaneous airspace situations represented as dynamic sets of aircraft states derived from ADS-B trajectories. By establishing an end-to-end mapping from microscopic aircraft states to future regional traffic flow, AeroSense preserves aircraft-level dynamics while naturally accommodating varying traffic density without relying on historical look-back windows. Experiments on a large-scale real-world dataset show that AeroSense exhibits admirable predictive accuracy and robustness over aggregation-based forecasting approaches, particularly during high-density traffic periods. These findings suggest that aircraft-state situation modeling provides a promising alternative to conventional time-series forecasting in air traffic flow management.

16.
arXiv (CS.CL) 2026-06-12

Why Sampling Is Not Choosing: Intentionality, Agency, and Moral Responsibility in Large Language Models

Recent advances in large language models (LLMs) have prompted claims that such systems exhibit agency or qualify as moral agents. This paper argues that these attributions are misguided. We maintain that moral responsibility requires commitment-bearing agency grounded in intrinsic intentionality and self-attributed action, and that such agency constitutes the form of free will relevant to responsibility. Although LLMs generate coherent and normatively evaluable outputs, their operation is fully characterized by probabilistic input-output mappings learned from data. Their apparent intentionality is derived rather than intrinsic, and their outputs are neither owned as commitments nor guided by reasons. Variability introduced by stochastic sampling does not amount to choice or authorship. We address objections from the intentional stance, functionalism, compatibilism, and the presence of moral reasoning in model outputs, arguing that none suffice to establish genuine agency.

17.
arXiv (CS.CV) 2026-06-17

Structure-Aware Text Recognition for Ancient Greek Critical Editions

Recent advances in visual language models (VLMs) have transformed end-to-end document understanding. However, their ability to interpret the complex layout semantics of historical scholarly texts remains limited. This paper investigates structure-aware text recognition for Ancient Greek critical editions, which have dense reference hierarchies and extensive marginal annotations. We introduce two novel resources: (i) a large-scale synthetic corpus of 185,000 page images generated from TEI/XML sources with controlled typographic and layout variation, and (ii) a curated benchmark of real scanned editions spanning more than a century of editorial and typographic practices. Using these datasets, we evaluate three state-of-the-art VLMs under both zero-shot and fine-tuning regimes. Our experiments reveal substantial limitations in current VLM architectures when confronted with highly structured historical documents. In zero-shot settings, most models significantly underperform compared to established off-the-shelf software. Nevertheless, the Qwen3VL-8B model achieves state-of-the-art performance, reaching a median Character Error Rate of 1.0\% on real scans. These results highlight both the current shortcomings and the future potential of VLMs for structure-aware recognition of complex scholarly documents.

18.
arXiv (CS.AI) 2026-06-17

Quantum Cinema: An Interactive Cinematic Exploration of Quantum Computing Hardware via Generative World Models

arXiv:2606.17102v1 Announce Type: cross Abstract: Quantum computing promises transformative advances across science and industry, yet the physical hardware that enables these computations remains invisible to the public: quantum processors operate inside sealed dilution refrigerators at temperatures near absolute zero, making direct observation impossible. This "imagination gap" between quantum computing's growing societal impact and the public's ability to visualize it represents a significant barrier to quantum literacy and workforce development. We present Quantum Cinema, an open-source, browser-based interactive application that closes this gap by transforming invisible quantum hardware into explorable, cinematic experiences using generative world models. Quantum Cinema guides users through a four-act narrative – from the foundational Nobel Prize-winning science of quantum entanglement, through curated video introductions to three major quantum computing architectures (trapped-ion, neutral-atom, and superconducting systems), into immersive three-dimensional generative worlds that make invisible quantum phenomena observable, and finally to interactive radar-chart comparisons grounded in real quantum device specifications. All three-dimensional environments are generated using WorldLabs' generative world model platform and are scientifically grounded in curated metrics from Amazon Web Services (AWS) Braket quantum hardware. Quantum Cinema requires no installation, no specialized hardware, and no quantum computing background. It is designed to serve two distinct communities: scholars and developers seeking to replicate or extend the platform, and educators, researchers, and science communicators seeking an intuitive tool for explaining quantum hardware to diverse audiences. This paper describes the system architecture, the generative world model pipeline, use cases for both communities, and directions for future work.

19.
arXiv (CS.CL) 2026-06-16

The Answer Lies Within: Self-Derived Rewards Enable Explainable Relation Extraction

Despite the remarkable reasoning capabilities of large language models, they still struggle with one-shot relation extraction without predefined relation labels. We identify two pitfalls: models are often misled by irrelevant tokens instead of relation-conveying semantics, and they often fail to align with the abstraction level human annotators expect. We introduce a novel framework that closes this gap with two components: (1) COGRE, a cognitively-inspired reasoning framework that structures RE into a series of processes mimicking human text-processing; and (2) HIT@DICT, a reinforcement learning intermediate reward strategy that encourages reasoning to align with relational labels by rewarding relation-relevant phrases in reasoning. The reward is derived on a credit dictionary automatically extracted from correct predictions. Our experiments show that our framework improves both accuracy and explanation quality by addressing these two pitfalls. For example, COGRE with Qwen2.5-14B-Instruct on One-shot NYT29 achieves 24.65% F1, surpassing prior reasoning-based designs. Optimizing this approach with RL using HIT@DICT further improves performance by +23.46% points. Finally, human evaluation shows that our best model generates relational phrases closely aligned with gold labels, increasing human explanation quality ratings by 54% (relative).

20.
arXiv (CS.CV) 2026-06-15

3D-RFT: Reinforcement Fine-Tuning for Video-based 3D Scene Understanding

Reinforcement Learning with Verifiable Rewards ( RLVR ) has emerged as a transformative paradigm for enhancing the reasoning capabilities of Large Language Models ( LLMs), yet its potential in 3D scene understanding remains under-explored. Existing approaches largely rely on Supervised Fine-Tuning ( SFT), where the token-level cross-entropy loss acts as an indirect proxy for optimization, leading to a misalignment between training objectives and task performances. To bridge this gap, we present Reinforcement Fine-Tuning for Video-based 3D Scene Understanding (3D-RFT ), the first framework to extend RLVR to video-based 3D perception and reasoning. 3D-RFT shifts the paradigm by directly optimizing the model towards evaluation metrics. 3D-RFT first activates 3D-aware Multi-modal Large Language Models ( MLLM s) via SFT, followed by reinforcement fine-tuning using Group Relative Policy Optimization ( GRPO) with strictly verifiable reward functions. We design task-specific reward functions directly from metrics like 3D IoU and F1-Score to provide more effective signals to guide model training. Extensive experiments demonstrate that 3D-RFT-4B achieves state-of-the-art performance on various video-based 3D scene understanding tasks. Notably, 3D-RFT-4B significantly outperforms larger models (e.g., VG LLM-8B) on 3D video detection, 3D visual grounding, and spatial reasoning benchmarks. We further reveal good properties of 3D-RFT such as robust efficacy, and valuable insights into training strategies and data impact. We hope 3D-RFT can serve as a robust and promising paradigm for future development of 3D scene understanding.

21.
arXiv (CS.LG) 2026-06-18

Reinforcement Learning for Accelerated Aerodynamic Shape Optimisation

arXiv:2507.17786v2 Announce Type: replace Abstract: We introduce a reinforcement learning (RL) based adaptive optimization algorithm for aerodynamic shape optimization focused on dimensionality reduction. The form in which RL is applied here is that of a surrogate-based, actor-critic policy evaluation MCMC approach allowing for temporal 'freezing' of some of the parameters to be optimized. The goals are to minimize computational effort, and to use the observed optimization results for interpretation of the discovered extrema in terms of their role in achieving the desired flow-field. By a sequence of local optimized parameter changes around intermediate CFD simulations acting as ground truth, it is possible to speed up the global optimization if (a) the local neighbourhoods of the parameters in which the changed parameters must reside are sufficiently large to compete with the grid-sized steps and its large number of simulations, and (b) the estimates of the rewards and costs on these neighbourhoods necessary for a good step-wise parameter adaption are sufficiently accurate. We give an example of a simple fluid-dynamical problem on which the method allows interpretation in the sense of a feature importance scoring.

22.
arXiv (quant-ph) 2026-06-12

Generalized two-qubit Hamiltonian for Projective Quantum Feature Maps

arXiv:2606.13641v1 Announce Type: new Abstract: Projected quantum feature maps provide a strategy for using quantum processors as feature generators for classical machine-learning models. Building on counterdiabatic Ising-glass and one-dimensional Heisenberg PQFMs, we introduce a generalized two-qubit Hamiltonian-based PQFM that provides a unified way to encode classical features through local Pauli fields and pairwise two-qubit Pauli interactions. This construction allows distinct classical variables to be embedded along different Pauli axes of the same qubit, increasing the information density of shallow circuits while remaining compatible with hardware constraints. We develop and implement these methods in pqfmlib, a publicly available Python library for constructing, executing, and benchmarking Hamiltonian-based PQFMs.We then benchmark the generalized Hamiltonian PQFMs against reference PQFMs on four biomedical classification datasets under a nested cross-validation protocol with paired statistical tests. Quantum features are generated using both IBM quantum processors with up to 156 qubits and statevector simulations. Our results show that the generalized two-qubit Hamiltonian family provides the most consistent pattern of statistically supported gains over matched classical baselines, although the performance of all methods depends on the dataset, encoding strategy, measured observables, and hardware conditions. These findings support generalized Hamiltonian PQFMs as a promising route toward near-term quantum utility.

23.
arXiv (CS.CV) 2026-06-16

Multi-Modal Attention for Automated Disaster Damage Assessment Using Remote Sensing Imagery and Deep Learning

Timely and accurate disaster damage assessment is crucial for effective emergency response, resource allocation, and recovery. Traditional methods, which often rely on manual inspections or sparse data, are typically slow and error-prone. This paper introduces a novel framework leveraging remote sensing imagery and deep learning to automate building damage classification. Using pre- and post-disaster satellite imagery, our model categorizes buildings into four damage levels: no damage, minor damage, major damage, and destroyed. The core innovation is a multi-modal attention mechanism that fuses bi-temporal features to explicitly detect and assess structural changes. We employ a lightweight ConvNeXT-Tiny backbone to ensure efficient processing without compromising performance. Key contributions include: (1) a cross-attention module for multi-modal data fusion, (2) an optimized preprocessing pipeline for large-scale datasets, and (3) robust data augmentation techniques. Experiments on a large-scale disaster dataset demonstrate an overall classification accuracy of 94.90%. The model effectively discriminates between damage categories and remains resilient to incomplete data. This system significantly improves assessment speed and accuracy, aiding emergency responders in prioritizing interventions. This work advances automated disaster damage detection by integrating multi-temporal imagery with deep learning, offering a scalable solution for real-time response.

24.
arXiv (CS.CV) 2026-06-12

Improving Pre-trained Adult Glioma Segmentation Models Using only Post-processing Techniques

Gliomas are the most common malignant brain tumors in adults and are among the most lethal. Despite aggressive treatment, the median survival rate is less than 15 months. Accurate multiparametric MRI (mpMRI) tumor segmentation is critical for surgical planning, radiotherapy, and disease monitoring. While deep learning models have improved the accuracy of automated segmentation, large-scale pre-trained models generalize poorly and often underperform, producing systematic errors such as false positives, label swaps, and slice discontinuities in slices. These limitations are further compounded by unequal access to GPU resources and the growing environmental cost of large-scale model training. In this work, we propose adaptive post-processing techniques to refine the quality of glioma segmentations produced by large-scale pretrained models developed for various types of tumors. We demonstrated the techniques in multiple BraTS 2025 segmentation challenge tasks, with the ranking metric improving by 14.9 % for the sub-Saharan Africa challenge and 0.9% for the adult glioma challenge. This approach promotes a shift in brain tumor segmentation research from increasingly complex model architectures to efficient, clinically aligned post-processing strategies that are precise, computationally fair, and sustainable.

25.
Nature Biotechnology 2026-06-05

Structural motif search across the protein universe with Folddisco

作者:

Detecting similar protein structural motifs in large structure collections is computationally expensive. We developed Folddisco, a fast structural motif search tool that uses an index of position-independent geometric features, including side-chain orientation, combined with a rarity-based scoring system. Folddisco is 20-fold faster in querying and fourfold more storage-efficient than existing methods while improving accuracy. Folddisco is freely available online ( https://folddisco.foldseek.com ), along with a webserver ( https://search.foldseek.com/folddisco ). Folddisco enables protein structural motif search in million scale databases.