Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-12

A Quantitative Experimental Repeated Measures Study of Training Dynamics in a Small Llama Style Language Model Under a Compute-Aware Token Budget

作者:

arXiv:2606.13370v1 Announce Type: new Abstract: This study examines training dynamics in a small Llama-style language model trained under a fixed, compute-constrained token budget. Rather than evaluating efficiency solely through endpoint performance, the study uses a quantitative experimental repeated measures design to analyze how validation loss, validation perplexity, rolling volatility, backslide behavior, spike behavior, and between-seed variability change across token-based training intervals. Six independent training runs were conducted on a 4.26-million-parameter model using the TinyStories corpus, CPU-based full-precision training, and a target budget of approximately 20 million cumulative training tokens. Metrics were collected across 21 intervals, producing 126 seed-by-interval observations. Repeated measures ANOVA showed statistically significant interval effects for validation loss, validation perplexity, and rolling volatility. Descriptive trajectories revealed rapid early improvement followed by non-monotonic degradation during later training intervals. Mean validation loss decreased from 8.3552 at initialization to 2.7996 near 4 million tokens, but increased to 3.9010 by the final checkpoint. Validation perplexity followed the same pattern, falling sharply early in training before rising later. Derived telemetry further showed recurrent validation-loss backslides and no interval-summary evidence of a stable phase under the predefined criteria. These findings suggest that compute-aware language model evaluation should examine training trajectories rather than endpoint metrics alone. In constrained compute settings, additional token exposure may increase computational cost without producing proportional generalization gains, and interval-level telemetry can reveal instability, regression, and diminishing returns that final metrics may obscure.

02.
arXiv (CS.CL) 2026-06-18

Continuous Audio Thinking for Large Audio Language Models

Large audio language models (LALMs) have shown impressive capabilities on diverse audio understanding tasks, ranging from speech transcription to music analysis. However, because LALMs are typically trained to produce text-aligned responses, their hidden states are progressively shaped for text generation rather than for preserving acoustic information. As a result, the diverse acoustic content that audio carries, such as phonetic detail, prosody, sound events, affect, and pitch, is lost along the way and difficult to leverage in the response. We introduce Continuous Audio Thinking (CoAT), a framework that equips audio language models with a continuous latent workspace for organizing acoustic information prior to response generation, grounded by distillation from audio experts. Within the thinking space, the model can utilize the rich acoustic information provided by expert distillation when generating its response. Furthermore, the proposed continuous thinking block can be processed in a single prefill, so CoAT does not require additional autoregressive decoding cost over the baseline. Across three LALMs, Qwen2-Audio, Qwen2.5-Omni-7B, and Audio Flamingo~3, performance gains on a broad benchmark suite spanning audio reasoning, audio understanding, music classification, speech emotion, and speech transcription demonstrate the effectiveness of CoAT. Further analysis confirms that the auxiliary supervision propagates from the thinking positions to the model's textual responses.

03.
arXiv (CS.CL) 2026-06-19

HydraHead: From Head-Level Functional Heterogeneity to Specialized Attention Hybridization

The quadratic complexity of attention poses a critical bottleneck for long-context processing, spurring interest in hybrid attention designs. Most open-source hybrid models adopt a layer-wise strategy. Yet, prior work has noted the inherent difficulty of integrating Linear Attention (LA) with Full Attention (FA), suggesting that the design space of attention hybridization remains underexplored. To probe this space, we conduct interpretability analysis and observe that layers exhibit block-wise functional similarity, while individual heads within the same layer display distinct functional specialization despite sharing input features. This head-level heterogeneity suggests that the head dimension provides a natural and principled granularity for fusing heterogeneous attention signals. Building on this insight, we introduce HydraHead, a novel architecture that hybridizes FA and LA along the head axis. HydraHead features two key innovations: (1) an interpretability-driven selection strategy that identifies retrieval-critical heads and preserves FA only for them, and (2) a scale-normalized fusion module that reconciles the distributional gap between FA and LA head outputs. By leveraging a three-stage transfer pipeline with parameter reuse and distillation, we achieve high-performance hybrid models with minimal training overhead. Under a unified training setup, HydraHead outperforms other hybrid designs in long-context tasks while maintaining strong general reasoning. With interpretability-driven head selection, it matches a 3:1 layer-wise hybrid's long-context performance at a 7:1 LA-to-FA ratio. Crucially, trained on only 15B tokens, HydraHead achieves over 69% improvement over the baseline at 512K context length, approaching Qwen3.5, a leading model of comparable size with a native context length of 256K. This highlights the significant scaling potential of head-level hybridization.

04.
arXiv (CS.AI) 2026-06-18

ARIADNE: Agnostic Routing for Inference-time Adapter DyNamic sElection

arXiv:2606.19079v1 Announce Type: new Abstract: The increasing deployment of parameter-efficient fine-tuning (PEFT) has led to model ecosystems in which a single backbone is paired with many task-specialized adapters. In this setting, inference-time queries often arrive without task labels, requiring the system to automatically select the most appropriate adapter from a growing and heterogeneous adapter pool. Existing routing methods either depend on access to adapter internals, such as weight decompositions or gradient-based statistics, or require additional router training, which limits scalability and portability as new adapters are added. We introduce ARIADNE, a training-free, adapter-agnostic routing framework for dynamic adapter selection at inference time. ARIADNE represents each adapter through a set of centroids computed from embeddings of its training set, capturing the data distribution associated with that adapter. Given an unlabeled input, it selects an adapter by measuring proximity to these centroids in latent space. Because routing is performed entirely in the input embedding space, ARIADNE is compatible with arbitrary PEFT methods and requires no modification to the adapters or training procedures. Primarily evaluated with Llama 3.2 1B Instruct on 23 diverse NLP tasks, ARIADNE recovers 97.44% of the upper bound performance. Scaling to 44 tasks, it achieves 89.7% average selection accuracy, without additional training or access to adapter internals.

05.
arXiv (quant-ph) 2026-06-11

A saturation-absorption rubidium magnetometer with multilevel optical Bloch-equation modeling for intermediate-to-high fields

arXiv:2601.09115v2 Announce Type: replace Abstract: We present SASHMAG (Saturated Absorption Spectroscopy High-field MAGnetometer), an atomic sensor designed for precision magnetic-field measurements in the intermediate-to-high field regime ($>0.2\,T$) using Rubidium-87 ($^{87}Rb$). The sensor operates in the hyperfine Paschen-Back regime, where the hyperfine and Zeeman interactions decouple, and utilizes counter-propagating pump-probe configuration in Faraday geometry to resolve isolated, Doppler-free Zeeman transitions. To interpret the resulting spectra in this strongly field-dependent regime, we developed a comprehensive multilevel optical Bloch-equation model solved explicitly in the uncoupled $\ket{m_I, m_J}$ basis, capturing state mixing and nonlinear saturation dynamics. This model reproduces measured spectra at sub-Doppler resolution and is consistent with analytical expectations for power broadening and thermal Doppler scaling. Magnetic field estimation is performed using a physics-constrained optimization routine that infers the magnetic field by minimizing the residual between experimentally extracted line centers and calculated transition frequencies from the field-dependent Hamiltonian. We demonstrate magnetic field retrieval from $0.2\,T$ to $0.4\,T$ with a precision of $\pm 0.0017 \,T$). Furthermore, the validated simulation establishes a foundation for generating synthetic training datasets, paving the way for autonomous, Machine Learning-enhanced magnetometry in applications ranging from MRI to fusion reactors.

06.
arXiv (quant-ph) 2026-06-16

Systematic Construction of Time-Dependent Hamiltonians for Microwave-Driven Josephson Circuits

arXiv:2512.20743v4 Announce Type: replace Abstract: Time-dependent electromagnetic drives are fundamental for controlling complex quantum systems, including superconducting Josephson circuits. In these devices, accurate time-dependent Hamiltonian models are imperative for predicting their dynamics and designing high-fidelity quantum operations. Existing numerical methods, such as black-box quantization (BBQ) and energy-participation ratio (EPR), excel at modeling the static Hamiltonians of Josephson circuits. However, these techniques do not fully capture the behavior of driven circuits stimulated by external microwave drives, nor do they include a generalized approach to account for the inevitable noise and dissipation that enter through microwave ports. Here, we introduce numerical techniques that leverage classical microwave simulations, efficiently executable in finite-element solvers, to obtain the time-dependent Hamiltonian of microwave-driven superconducting circuits with arbitrary geometries under charge, flux, or mixed electromagnetic modulation. Importantly, our techniques do not rely on a lumped-element description of the superconducting circuit, in contrast to previous approaches to tackling this problem. We demonstrate the versatility of our approach by characterizing the driven properties of realistic circuit devices in complex electromagnetic environments, including coherent dynamics due to charge and flux modulation, as well as drive-induced relaxation and dephasing. Our techniques offer a powerful toolbox for optimizing circuit designs and advancing practical applications in superconducting quantum computing.

07.
arXiv (CS.CL) 2026-06-18

Learning User Simulators with Turing Rewards

Learning to simulate human users in interactive settings could advance the training of agent assistants, evaluation of personalization systems, research in the social sciences, and more. Existing approaches generally do so by training a large language model (LLM) to match a single ground truth response, either by maximizing the log probability or by using a similarity reward. We instead propose {Turing-RL}: a Turing-Test-based reinforcement learning approach for training user simulator models. {Turing-RL} uses a discriminative Turing reward with an LLM judge to score how indistinguishable a generated response is from the real user's given the user's history, and the user simulator LLM learns to produce responses indistinguishable from what the user could have said with such rewards. Across two different domains–conversational chat and Reddit forum discussion–we find that {Turing-RL} consistently outperforms baseline methods on both LLM and human evaluation metrics. Our study suggests that optimizing for indistinguishability, rather than response matching, is effective for learning user simulators.

08.
arXiv (CS.AI) 2026-06-16

Who Drifted: the System or the Judge? Anytime-Valid Attribution in LLM Evaluation Pipelines

作者:

arXiv:2606.15474v1 Announce Type: new Abstract: Continuous evaluation of LLM products relies on a strong LLM judge treated as ground truth: a cheap monitor scores every interaction and a team is paged when the score drifts down. But the judge is itself a model behind an API, and a silent version bump or scoring-prompt update changes how it scores – so every drift alarm is ambiguous between a worse product and a changed judge. We resolve the ambiguity with a fixed, human-labeled anchor set that the current judge re-scores at a steady interleave, a second betting e-process on the judge-versus-human gap, and a guard-window rule returning a verdict in {none, system, judge}. We prove anytime-validity, one-way identification (only the judge can move the anchors), an attribution race whose design law is that the anchors must out-run the main process they guard, and process orthogonality. On two real judge changes, a silent version bump is detected as judge drift in 60/60 runs with zero judge-to-system misattribution, and a contaminating strict-prompt change is correctly attributed on 110 of 120 runs at guard width 300 – while the industry-default rolling z-test false-alarms on 75% of drift-free streams. Every experiment replicates on a second domain (TL;DR summarization) with nothing re-tuned, and where the domains differ the differences are the ones the race predicts: the strict-prompt change shifts scores harder there, so the anchors fire faster and attribution becomes perfect (240/240). The monitor runs at approximately 0.64 of the cost of strong-judging every item, or 0.21 in a cheaper-but-deafer regime.

09.
arXiv (CS.AI) 2026-06-18

From Memorization to Creation: Evaluating the Cognitive Depth of LLM-Generated Educational Questions

arXiv:2606.18257v1 Announce Type: cross Abstract: While LLMs show promise in automating educational content creation, their ability to generate questions that stimulate higher-order thinking remains understudied. This work evaluates six widely-used LLMs through a Bloom's Taxonomy lens, focusing on their capacity to transcend rote memorization and achieve cognitive leaps. Using a hybrid human–AI evaluation protocol, we generate and analyze 20{,}700 questions across computer science, K–12 math, and social-science domains. Key contributions include: (1) a fine-grained prompting strategy that reduces question repetitiveness by 24.45\% for Qwen2.5-7B-Instruct, and increases the proportion of higher-order cognitive level outputs by 11.53\% for InternLM3-8B-Instruct; (2) quantitative metrics for cognitive shift intensity (CogShift) and category drift, revealing InternLM3's superior performance in multi-level transitions; (3) an interpretability analysis revealing metric-level correlations that enhance the transparency of Chain-of-Thought prompting. Our findings highlight the importance of cognitive-aware prompt design and provide benchmarks for deploying LLMs in personalized learning systems.

11.
arXiv (quant-ph) 2026-06-19

Thermodynamic Value of XOR-Game-Induced Side Information in a Szilard Engine

arXiv:2605.12044v3 Announce Type: replace Abstract: We introduce a Szilard-type thermodynamic valuation of side-information channels induced by Bell-type correlations. In each round, a two-level working system is thermalized with a degenerate Hamiltonian, so that its physical microstate is a uniform classical bit. A trusted referee embeds this bit into a finite two-player XOR game, and a correlation resource produces a compressed controller bit. The controller uses only this compressed bit as side information for feedback. The construction is formulated first for arbitrary finite XOR games. The referee encoding makes the game-winning event equivalent to correct prediction of the physical microstate. Consequently, the induced side-information channel is binary symmetric, with success probability equal to the XOR-game winning probability of the supplied behaviour. The reversible Szilard feedback value is therefore fixed by the mutual information between the microstate and the controller record. Optimizing over local, quantum, and nonsignalling behaviour sets turns the corresponding game values into local, quantum, and nonsignalling thermodynamic ceilings. The construction is an effective-channel valuation, not a claim that Bell nonlocality is thermodynamic fuel. The controller receives only the compressed prediction bit, not the auxiliary variables that define the game. The thermodynamic costs of the referee, the correlation resource, and the preprocessing are not included. When controller-memory reset is included in a full cycle, the net work is non-positive, consistently with the second law.

12.
PLOS Computational Biology 2026-06-01

BeetleAtlas 2: An enhanced <i>Tribolium castaneum</i> web resource for tissue and developmental transcriptomics allowing refinement of gene predictions

by David P. Leader, Muhammad T. Naseem, Janina L. Rinke, Kenneth Veland Halberg BeetleAtlas is an online resource for tissue- and stage-specific transcriptomics in the red flour beetle, Tribolium castaneum. On updating from the original Tcas5.2 genome assembly to the more recent improved icTriCast1.1 genome assembly it became evident that there were major discrepancies between the gene models of the two genome annotations in use: the OGS3 and the NCBI gene sets. As neither was clearly superior we implemented a new design in BeetleAtlas 2 (beetleatlas.org) comprising two parallel ‘modes’ — one incorporating results using the NCBI gene models and a second incorporating those using the OGS3 gene models. This allows direct comparison where equivalent gene models exist: 50–57% of cases. To aid resolution of discrepancies between the two gene model sets and verification of results, gene models are linked to a custom visualization of RNA-seq read coverage of the genome in the UCSC Genome Browser. This displays reads from 22 tissues and life stages superimposed on the icTriCast1.1 genome assembly. Reference tracks show the NCBI gene models, the OGS3 gene models after translation of their coordinates from the Tcas5.2 assembly, and 1050 discontinued NCBI gene models from the previous assembly after a similar transfer of coordinates. We document various situations in which distinct patterns of expression of the tissues can be used to confirm and extend correlations between the two gene sets, resolve discrepancies between them, make corrections and identify putative genes or exons absent from the current gene sets. BeetleAtlas 2 allows those involved in Tribolium research to avoid the pitfalls inherent in incorrect gene models when planning experiments on specific genes and interpreting the results. It also demonstrates how BeetleAtlas 2 might play an important role in establishing a revised gene set for Tribolium castaneum in the future.

13.
arXiv (quant-ph) 2026-06-17

Coupled-Mode Equations with Arbitrary Mode Combinations for Kinetic-Inductance Superconducting Traveling-Wave Parametric Devices: Theory and Experimental Validation

arXiv:2606.17264v1 Announce Type: cross Abstract: The coupled-mode equations (CMEs) have proven very successful in describing parametric processes in nonlinear optics. More recently, the same formulation has been used to model microwave superconducting parametric amplifiers and frequency multipliers. However, when applied to the microwave regime, not all assumptions remain valid and losses play a more dramatic role. Here, we revisit the CMEs applied to traveling-wave superconducting amplifiers to include losses and provide a formulation that enables their systematic derivation for any combination of traveling waves. As examples, we discuss the impact of unwanted harmonics and intermodulation products on parametric amplification, as well as harmonic generation. We verify that, if not properly accounted for, device performance can deviate considerably from the ideal case. Furthermore, using a superconducting CPW-based artificial transmission line and combining an independent experimental determination of its nonlinear parameter $I'_*$ with simulations of its linear properties, we obtain a parameter-free validation of this formulation. The nonlinear parameter was determined to be $I'_* \approx 27$ mA which, surprisingly, scales with the theoretical depairing current and not with the much smaller critical current of the device. For the validation, we measured multiple-harmonic generation and found excellent agreement between theory and experiment. The fact that $I'_* \gg I_C$ has direct implications for device design.

14.
arXiv (CS.CV) 2026-06-16

DYNA-PRUNER: Input-Adaptive Data-Model Co-Pruning for Efficient and Scalable Spatio-Temporal Media Prediction

Spatio-temporal prediction supports radar/satellite nowcasting and city-scale traffic monitoring, but modern models are often too expensive for real-time deployment. This stems from a mismatch between dense computation and strong input-dependent redundancy (e.g., calm seas or clear skies). To enable automated, resource-aware architecture optimization in scalable media analysis, we propose Dyna-Pruner, an end-to-end framework for input-dependent co-pruning of data and model structure. A shared-importance synchronization mechanism generates coupled masks that prune redundant regions and their corresponding computational units (e.g., convolutional filters), yielding per-sample sparse sub-networks at inference time. Experiments on WeatherBench, SEVIR, and TaxiBJ show seamless integration with CNN, RNN, and Transformer backbones, reducing FLOPs by up to $70\%$ and achieving a $2.5\times$ speedup on NVIDIA Jetson AGX Orin with negligible accuracy loss ($

15.
arXiv (math.PR) 2026-06-11

Arrangements of Consecutive Numbers in Mallows Permutations

arXiv:2606.12410v1 Announce Type: cross Abstract: We study the random variable that counts the number of specific arrangements of clustered consecutive numbers in permutations under the Mallows distribution. We provide an asymptotic expression for the expected value of this random variable. This result extends and tightens the previously known result by Pinsky (2022) concerning clustered consecutive numbers in Mallows permutations. Moreover, we identify a range of parameters for which the distribution of the number of arrangements of clustered consecutive numbers in Mallows permutations is close to a Poisson distribution.

16.
arXiv (CS.AI) 2026-06-11

OCSVM-Guided Representation Learning for Unsupervised Anomaly Detection

arXiv:2507.21164v2 Announce Type: replace-cross Abstract: Unsupervised anomaly detection (UAD) aims to detect anomalies without labeled data, a necessity in many machine learning applications where anomalous samples are rare or not available. Most state-of-the-art methods fall into two categories: reconstruction-based approaches, which often reconstruct anomalies too well, and decoupled representation learning with density estimators, which can suffer from suboptimal feature spaces. While some recent methods attempt to couple feature learning and anomaly detection, they often rely on surrogate objectives, restrict kernel choices, or introduce approximations that limit their expressiveness and robustness. To address this challenge, we propose a novel method that couples representation learning with an analytically solvable One-Class SVM (OCSVM), through a custom loss formulation that directly aligns latent features with the OCSVM decision boundary. The model is evaluated on two tasks: a \deleted{new} benchmark based on MNIST-C, and a challenging brain MRI \deleted{subtle} lesion detection task. Unlike most methods that focus on large, hyperintense lesions at the image level, our approach succeeds to target small, non-hyperintense lesions, while we evaluate voxel-wise metrics, addressing a more clinically relevant scenario. Both experiments evaluate a form of robustness to domain shifts, including corruption types in MNIST-C and texture or population age variations in MRI. Results demonstrate performance and robustness of our proposed model, highlighting its potential for general UAD and real-world medical imaging applications. The source code is available at https://github.com/Nicolas-Pinon/uad_ocsvm_guided_repr_learning.

17.
arXiv (CS.LG) 2026-06-19

Humanoid Everyday: A Comprehensive Robotic Dataset for Open-World Humanoid Manipulation

arXiv:2510.08807v2 Announce Type: replace-cross Abstract: From loco-motion to dextrous manipulation, humanoid robots have made remarkable strides in demonstrating complex full-body capabilities. However, the majority of current robot learning datasets and benchmarks mainly focus on stationary robot arms, and the few existing humanoid datasets are either confined to fixed environments or limited in task diversity, often lacking human-humanoid interaction and lower-body locomotion. Moreover, there are a few standardized evaluation platforms for benchmarking learning-based policies on humanoid data. In this work, we present Humanoid Everyday, a large-scale and diverse humanoid manipulation dataset characterized by extensive task variety involving dextrous object manipulation, human-humanoid interaction, locomotion-integrated actions, and more. Leveraging a highly efficient human-supervised teleoperation pipeline, Humanoid Everyday aggregates high-quality multimodal sensory data, including RGB, depth, LiDAR, and tactile inputs, together with natural language annotations, comprising 10.3k trajectories and over 3 million frames of data across 260 tasks across 7 broad categories. In addition, we conduct an analysis of representative policy learning methods on our dataset, providing insights into their strengths and limitations across different task categories. For standardized evaluation, we introduce a cloud-based evaluation platform that allows researchers to seamlessly deploy their policies in our controlled setting and receive performance feedback. By releasing Humanoid Everyday along with our policy learning analysis and a standardized cloud-based evaluation platform, we intend to advance research in general-purpose humanoid manipulation and lay the groundwork for more capable and embodied robotic agents in real-world scenarios. Our dataset, data collection code, and cloud evaluation website are made publicly available on our project website.

18.
bioRxiv (Bioinfo) 2026-06-12

Computational Design of Optimal Sequences for Targeted Hypermutagenesis Using Recombination-Coupled Diversity-Generating Retroelements

Diversity-generating retroelements (DGRs) are natural systems that accelerate evolution via targeted hypermutation at adenines. We previously developed DGRec, a system combining DGRs and recombineering for programmable mutagenesis in Escherichia coli. We here address two important issues with DGRec: the dependence of mutagenesis efficiency on the dgrRNA secondary structure and the variability of the reverse-transcription biases with sequence context and position. First, we introduce and validate a method to recode non-functional templates, i.e. with low mutagenesis efficiency, into highly functional ones through synonymous mutations. Second, we develop a Long Short-Term Memory (LSTM) model to predict DGRec mutational profiles for any given template sequence. By integrating this LSTM model with our recoding method, we establish a comprehensive workflow for customized directed evolution, enabling researchers to precisely fine-tune DGRec in vivo mutagenesis to their engineering needs.

19.
arXiv (math.PR) 2026-06-18

Denoising Distances in Metric Measure Spaces

arXiv:2606.18301v1 Announce Type: cross Abstract: Recent work studied the problem of finding clusters and denoising pairwise distances from noisy distances of points sampled on a manifold. We study the same problems in more general metric measure spaces under \lowerphiregularity{}. We give an algorithm that extracts large localized clusters around every sampled point and uses them to denoise distances to any fixed accuracy, with near-linear running time in the dense fixed-accuracy regime. We also show how to achieve much higher accuracy with a non-efficient algorithm. This suggests that unlike the Riemannian case, denoising to higher accuracy in more general metric spaces has a statistical-computational gap.

20.
arXiv (math.PR) 2026-06-15

Stationary measures for higher spin vertex models on a strip

作者:

arXiv:2309.04897v2 Announce Type: replace-cross Abstract: We introduce a higher spin vertex model on a strip with fused vertex weights. This model can be regarded as a generalization of both the unfused six-vertex model on a strip arXiv:2212.09111 and an 'integrable two-step Floquet dynamics' model introduced in arXiv:1711.08884. We solve for the stationary measure using a fused version of the matrix product ansatz and then characterize it in terms of the Askey-Wilson process. Using this characterization, we obtain the limits of the mean density along an arbitrary down-right path. It turns out that all these models share a common phase diagram, which, after an appropriate mapping, matches the phase diagram of open ASEP. This provides evidence for the universality of this phase diagram.

21.
arXiv (CS.AI) 2026-06-15

FactoryLLM: A Safe and Open-Source AI Playground for Evaluating LLMs in Smart Factories

arXiv:2606.14119v1 Announce Type: new Abstract: Fault diagnostics and recovery in smart factories is challenging because critical information is dispersed across manuals of multiple machines which are interconnected through the manufacturing process. Large Language Models (LLMs) can provide a promising approach. In this paper, we propose FactoryLLM, a safe and open-source AI playground designed for evaluating different LLM-based retrieval-augmented generation (RAG) models by analysing documents from multiple machines across the manufacturing process. FactoryLLM enables the user to configure the LLM, and assess performance when reasoning over multiple documents, through a dual evaluation setup using both RAGAS and NVIDIA's LLM-as-a-Judge metrics. FactoryLLM is safe because it allows users to run local or open-source LLMs without sharing sensitive industrial data, providing a controlled environment for experimentation. We demonstrate the efficacy of FactoryLLM through a case study which involves an Autonomous Intelligent Vehicle and its Mobile Planner software, evaluating three LLMs across 30 maintenance queries derived from approximately 600 pages of cross-machine documentation. The results suggest that FactoryLLM is effective in cross-machine document reasoning: every model achieved a groundedness score above 0.88. The full code and documentation for community to test FactoryLLM with their manufacturing specific scenarios are publicly available.

22.
arXiv (CS.CL) 2026-06-19

REDACT: A Systematically Controlled Multilingual Benchmark for Personal Information Detection

Benchmark infrastructure for personally identifiable information (PII) detection remains limited: existing corpora cover few entity types, use ad hoc generation conditions, and do not show which surface conditions cause detector failures. We present REDACT, a systematically controlled multilingual PII benchmark with 13,427 records, 324,078 entity annotations, 51 entity types, 4,127 surface-form patterns, and 25 languages across 9 scripts. A strength-2 covering-array sampler controls nine generation axes: domain, format, difficulty, length, density, code-switching, language, adjacency, and co-occurrence. Three entity-level metadata fields (disclosure status, disclosure form, and a GDPR-aligned sensitivity tier) enable stratified evaluation beyond aggregate or per-type F1. From the full benchmark, we evaluate five detectors (Presidio, GLiNER, the OpenAI Privacy Filter, GPT-4.1, and Claude Sonnet 4.6) on a locked, language-stratified sample of 1,000 records. Aggregate F1 masks an architecture-dependent failure structure: the rule-based detector performs poorly on the highest-stakes data, including HIGH-sensitivity categories (recall 0.07) and non-verbatim disclosure forms, while the LLM detectors remain more robust, with the HIGH tier as their strongest sensitivity slice. A three-model reference-free LLM-as-judge assessment corroborates that sensitivity-tier assignment is the task's hardest axis. We release the benchmark, schema, prompts, and stratified evaluation harness.

23.
arXiv (CS.AI) 2026-06-16

Phys-JEPA: Physics-Informed Latent World Models for Multivariate Time-Series Forecasting

arXiv:2606.16076v1 Announce Type: cross Abstract: Multivariate forecasting in physical systems requires models that predict coupled temporal variables while preserving meaningful state evolution. Deep forecasters can fit temporal correlations, and physics-informed models can regularize predictions with scientific constraints, but these directions are often connected only at the decoded-output level. As a result, the hidden predictive state that generates future trajectories may remain statistically useful but physically unstructured. We introduce Phys-JEPA, a physics-informed joint-embedding predictive architecture for multivariate time-series forecasting. Phys-JEPA learns a latent world model in which predictive states are decomposed into physical and residual components, and physical consistency is imposed directly on latent states and latent transitions rather than only on decoded forecasts. This formulation uses known physical variables to organize the representation space while retaining residual capacity for unresolved dynamics. On Jena Climate 2009–2016, Phys-JEPA reduces aggregate MSE from 0.12482 to 0.12273 and temperature MSE from 0.01892 to 0.01831 at H=24. On Traffic, full Phys-JEPA improves aggregate MSE over the supervised baseline across all tested horizons, reducing H=192 MSE from 0.800784 to 0.773873. On Electricity, the best variant depends on horizon: static latent consistency is strongest at H=24 and H=48, while full Phys-JEPA gives the best aggregate and target-variable MSE at H=192. These initial results suggest that moving physics-informed learning from output space to latent predictive state space is a promising direction for interpretable temporal world models.

24.
bioRxiv (Bioinfo) 2026-06-12

DNA Compression with Genomic Language Models: Tokenization, Benchmarking, and an Information-Content Map

Lossless compression and probabilistic sequence modeling are two faces of the same coin: a model that assigns high probability to a sequence can encode it in few bits via arithmetic coding. We exploit this duality to evaluate genomic language models as compressors of DNA, using compression primarily as an objective probe of generative sequence modeling rather than as a deployable storage system. We release DNAGPT2, a family of ten GPT-2-small models pretrained for one epoch on a single A40 using the DNABERT2 multi-species corpus that differ only in byte-pair encoding vocabulary size. Coupled with arithmetic coding, the best model reaches 1.47 bits per base (bpb) on the T2T human genome, fourth in the Cobilab compression benchmark and ahead of every general-purpose compressor. Our results suggest that NLP-style tokenization choices may be suboptimal for DNA: a 32-token BPE vocabulary compresses better than larger vocabularies. We also find that, in this benchmark, published long-context genomic LMs underperform a much shorter-context BPE GPT-2; we discuss in Section 5 that this is not a controlled context-length ablation, since the compared models also differ in architecture, training data, parameter count, and tokenization. Finally, we compute a per-nucleotide information-content map of the human genome and show that exons, introns, intergenic regions, and Alu repeats have statistically distinct information profiles.

25.
arXiv (CS.CV) 2026-06-18

DINO-Med3D: Bridging Dimension and Domain Gaps in Volumetric Segmentation via Progressive Adaptation

Although DINOv3 has demonstrated remarkable semantic discrimination in natural imagery, its direct application to volumetric medical segmentation is hindered by inherent dimension and domain disparities. To resolve these issues, we propose DINO-Med3D, a two-stage progressive framework that repurpose the pre-trained DINOv3 encoder for 3D medical tasks. In the first stage, we mitigate the dimension gap by introducing a multi-slice embedding module that incorporates pseudo-3D context, while simultaneously employing a segmentation proxy task to adapt representations learned from natural scenes to the medical domain. Subsequently, we further enhance volumetric understanding by adding lightweight 3D adapters into the frozen backbone to enforce global inter-slice continuity. Finally, to compensate for the spatial information loss inherent in the embedding process, we design a parallel detail recovery stream to explicitly preserve high-frequency boundary cues. Extensive experiments on five public datasets demonstrate that our approach successfully adapts DINOv3 to the medical domain and significantly outperforms state-of-the-art baselines.