Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

01.
arXiv (CS.AI) 2026-06-18

Clin-JEPA: A Multi-Phase Co-Training Framework for Joint-Embedding Predictive Pretraining on EHR Patient Trajectories

arXiv:2605.10840v3 Announce Type: replace-cross Abstract: We present Clin-JEPA, a multi-phase co-training framework for joint-embedding predictive (JEPA) pretraining on EHR patient trajectories. JEPA architectures have enabled latent-space planning in robotics and high-quality representation learning in vision, but extending the paradigm to EHR data – to obtain a single backbone that simultaneously forecasts patient trajectories and serves diverse downstream risk-prediction tasks without per-task fine-tuning – remains an open challenge. Existing JEPA frameworks either discard the predictor after pretraining (I-JEPA, V-JEPA) or train it on a frozen pretrained encoder (V-JEPA 2-AC), leaving the encoder unaware of the rollout signal that the retained predictor must use at inference; co-training the encoder and predictor under a shared JEPA prediction objective would supply this grounding, but naïve co-training is unstable, with representation collapse and online/target drift causing autoregressive rollout to diverge. Clin-JEPA's five-phase pretraining curriculum – predictor warmup, joint refinement, EMA target alignment, hard sync, and predictor finalization – addresses each failure mode by phase, stably co-training a Qwen3-8B-based encoder and a 92M-parameter latent trajectory predictor. On MIMIC-IV ICU data, three independent evaluations support the framework: (1) latent $\ell_1$ rollout drift uniquely converges ($-$15.7%) over 48-hour horizons while baselines and ablations diverge (+3% to +4951%); (2) the encoder learns a clinically discriminative latent geometry (deteriorating-patient cohorts displace 4.83$\times$ further than stable patients in latent space, vs $\leq$2.62$\times$ for baseline encoders); (3) a single backbone outperforms strong tabular and sequence baselines on multi-task downstream evaluation. Clin-JEPA achieves mean AUROC 0.851 on ICareFM EEP and 0.883 on 8 binary risk tasks (+0.038 and +0.041 vs baseline average).

02.
medRxiv (Medicine) 2026-06-24

Development and External Validation of a Machine Learning Model for 10-Year Ischemic Stroke Risk Prediction in Diverse Populations

Importance: Machine-learning models for ischemic stroke risk prediction are rarely validated across ancestrally distinct cohorts, and the contributions of polygenic risk scores (PRS) and self-reported race in such models remain unclear. Objective: To develop and externally validate a 10-year ischemic stroke risk model and quantify the incremental contributions of laboratory trajectories, PRS, and self-reported race and ethnicity across populations. Design, Setting, and Participants: Retrospective cohort study with model development in the All of Us (AoU) Research Program (n = 34,987; 1,920 incident strokes) and external validation in the BioMe Biobank at Mount Sinai (n = 10,693; 107 incident strokes). Adults aged 45 years or older with at least 1 year of pre-baseline electronic health record data were anchored to a January 2010 baseline with 10-year follow-up. Exposures: Three XGBoost model tiers added laboratory feature trajectories (M2) and 20 PRS (M3) to clinical baseline features (M1); evaluated under race-blind and race-aware specifications. Main Outcomes and Measures: First inpatient ischemic stroke within 10 years; discrimination (area under the receiver operating characteristic curve [AUROC]) and calibration (observed-to-expected [O/E] ratio). Results: In the AoU test partition (n = 6,998; 384 cases), M3 achieved an AUROC of 0.813 (95% CI, 0.788-0.837), outperforming the Revised Framingham Stroke Risk Profile (AUROC difference, 0.164) and Pooled Cohort Equations (AUROC difference, 0.181; both P < 0.001). Discrimination transferred to BioMe (AUROC, 0.745), but predictions were systematically high (aggregate O/E ratio, 0.12 vs 1.00 in AoU), consistent with intercept-shift miscalibration; BioMe-fitted intercept recalibration restored calibration in African American and Hispanic participants but not European American participants. The PRS contribution was significant only among Hispanic participants in BioMe (AUROC difference, 0.042; P = 0.003), with no significant within-stratum gain in the other 5 cohort-by-race combinations. Adding self-reported race produced small gains when combined with PRS (BioMe AUROC difference, 0.022; P = 0.034; AoU AUROC difference, 0.006; P = 0.052) but not when added without PRS. Conclusions and Relevance: A machine-learning ensemble combining clinical, laboratory, and polygenic features outperformed traditional risk scores by 0.16 to 0.18 AUROC and retained discriminative validity in an ancestrally distinct external cohort but required site-specific recalibration of absolute risk. The marginal contribution of self-reported race overlapped with polygenic signal, supporting per-ancestry calibration over universal race-aware model deployment.

03.
arXiv (CS.LG) 2026-06-19

CAGE: Curvature-Aware Gradient Estimation For Accurate Quantization-Aware Training

arXiv:2510.18784v3 Announce Type: replace Abstract: Despite significant work on low-bit quantization-aware training (QAT), there is still an accuracy gap between such techniques and native training. To address this, we introduce CAGE (Curvature-Aware Gradient Estimation), a new QAT method that augments the straight-through estimator (STE) gradient with a curvature-aware correction designed to counteract the loss increase induced by quantization. CAGE is derived from a multi-objective view of QAT that balances loss minimization with the quantization constraints, yielding a principled correction term that depends on local curvature information. On the theoretical side, we introduce the notion of Pareto-optimal solutions for quantized optimization, and establish that CAGE yields strong convergence guarantees in the smooth non-convex setting. In terms of implementation, our approach is optimizer-agnostic, but we provide a highly-efficient implementation that leverages Adam statistics. CAGE significantly improves upon the prior state-of-the-art methods in terms of accuracy, for similar computational cost: for QAT fine-tuning, it halves the compression accuracy loss relative to the prior best method, while for QAT pre-training of Llama models, its accuracy for 3-bit weights-and-activations (W3A3) matches the accuracy achieved at 4-bits (W4A4) with the prior best method. The official implementation can be found over https://github.com/IST-DASLab/CAGE .

04.
arXiv (CS.AI) 2026-06-11

FACTR 2: Learning External Force Sensing for Commodity Robot Arms Improves Policy Learning

arXiv:2606.12406v1 Announce Type: cross Abstract: Contact-rich manipulation requires force sensitivity, but many robot arms lack dedicated force sensors due to their high cost. We present Neural External Torque Estimation (NEXT), a data-driven method that estimates external joint torques without needing any dedicated force sensors. NEXT trains in 1 minute from only 10 minutes of free-motion data, yet achieves estimates comparable to dedicated joint-torque sensors. NEXT enables force-feedback teleoperation on low-cost arms and improves policy learning through Force-Informed Re-Sampling Training (FIRST), which up-samples pre-contact and contact segments during behavior cloning. Across five long-horizon tasks, FIRST outperforms prior force-aware policies by over 17% in task progress. Together, NEXT and FIRST bring force-aware teleoperation and policy learning to off-the-shelf robots without additional sensing hardware. Video results and code are available at https://jasonjzliu.com/factr2

05.
arXiv (CS.AI) 2026-06-19

TeleMorpher: Toward Robust Simultaneous Motion-Location Editing

arXiv:2606.19676v1 Announce Type: cross Abstract: Diffusion models have achieved remarkable success in image and video generation and editing. While recent studies have extended these efforts toward motion editing, simultaneously transforming both motion and location-despite its practical importance-remains largely unexplored. To better understand robust motion-location editing, we first analyze the fundamental factors that degrade its quality. Based on this analysis, we propose TeleMorpher, one of the first one-shot frameworks to the best of our knowledge, for simultaneous motion-location editing. Our approach leverages motion priors, a target motion-centric video generated from an off-the-shelf model as motion-editing guidance, and the ground truth motion to enable more controllable and precise motion-location editing. Via this, our framework works as follows: (1) we first disentangle the protagonist and the background via pre-trained segmentation and inpainting models. (2) Then, we introduce a training-free pose warping that edits the protagonist's motion with the motion prior as the guidance. (3) The result of warped motion video is directly injected into a baseline motion editor during inference, mitigating the difference between source and target motions while preserving the appearance of the source video. (4) To enhance the reliability of quantitative evaluations, we propose two new LPIPS-based metrics that measure the background consistency before and after the motion editing and the fidelity of motion editing performance via measuring the difference between the extracted protagonist's skeletons from source and target videos. Experiments with in-the-wild videos and the TaiChi dataset demonstrate that TeleMorpher achieves superior performance across both quantitative and qualitative measurements (real-human evaluation), underscoring its effectiveness.

06.
arXiv (math.PR) 2026-06-16

The optimal sub-Gaussian normalisation for randomised monotone functions

arXiv:2312.01265v5 Announce Type: replace Abstract: Let $\mathcal{M}$ denote the class of randomised monotone functions on $\mathbb{R}$ with values in $[0,1]$, and let $U_{\mathcal{M}}\colon \mathbb{R}_+\to \mathbb{R}_+$ be the minimal function for which $$ \mathbb{P}\left\{ \sqrt{\eta_f}\, \sup_{t\in\mathbb{R}} \left| f_Z(t) - \Exf{f_Z(t)} \right| \ge \varepsilon\sqrt{U_{\mathcal{M}}(\eta_f)} \right\} \le 2\e^{-2\varepsilon^2} $$ holds for every member $f_Z$ of $\mathcal{M}$ with finite effective sample size $\eta_f$ and every positive $\varepsilon$. We prove that for every $x> 1$, $$ \left| \sqrt{U_{\mathcal{M}}(x)} - \sqrt{\log_4 x} \right| \le 2 \min\!\left\{ 1,\, \frac{2 \ln(\e + \ln x)}{\sqrt{\ln x}} \right\}\,. $$ The optimal adjustment $\sqrt{U_{\mathcal{M}}(x)}$ matches $\frac{1}{\sqrt{2\ln 2}}\sqrt{\ln x}$ for all $x>1$, with residuals bounded as above.

07.
arXiv (CS.CL) 2026-06-11

Vector Quantized Latent Concepts: A Scalable Alternative to Clustering-Based Concept Discovery

Large language models (LLMs) encode rich semantic information in their hidden states, yet it remains difficult to understand what information these internal representations capture. Latent concepts extracted from hidden states offer a promising direction for interpreting LLMs, but existing clustering-based methods face a trade-off: hierarchical clustering produces coherent concepts but is limited to small datasets due to its quadratic memory cost, while K-Means scales efficiently but may yield less semantically coherent concepts. We propose Vector Quantized Latent Concept (VQLC), a discrete concept learning framework that learns a codebook of latent concepts on frozen hidden states. Across 12 dataset-model settings, VQLC stays close to K-Means in computational cost, scales better than hierarchical clustering, and remains competitive in faithfulness, with the clearest gains on decoder-only models. LLMs-based evaluation, qualitative analysis, and a Sparse Autoencoder (SAE) comparison demonstrate that the learned concepts are interpretable and task-relevant.

08.
arXiv (CS.CV) 2026-06-19

Collaborative Multi-Modal Coding for High-Quality 3D Generation

3D content inherently encompasses multi-modal characteristics and can be projected into different modalities (e.g., RGB images, RGBD, and point clouds). Each modality exhibits distinct advantages in 3D asset modeling: RGB images contain vivid 3D textures, whereas point clouds define fine-grained 3D geometries. However, most existing 3D-native generative architectures either operate predominantly within single-modality paradigms-thus overlooking the complementary benefits of multi-modality data-or restrict themselves to 3D structures, thereby limiting the scope of available training datasets. To holistically harness multi-modalities for 3D modeling, we present TriMM, the first feed-forward 3D-native generative model that learns from basic multi-modalities (e.g., RGB, RGBD, and point cloud). Specifically, 1) TriMM first introduces collaborative multi-modal coding, which integrates modality-specific features while preserving their unique representational strengths. 2) Furthermore, auxiliary 2D and 3D supervision are introduced to raise the robustness and performance of multi-modal coding. 3) Based on the embedded multi-modal code, TriMM employs a triplane latent diffusion model to generate 3D assets of superior quality, enhancing both the texture and the geometric detail. Extensive experiments on multiple well-known datasets demonstrate that TriMM, by effectively leveraging multi-modality, achieves competitive performance with models trained on large-scale datasets, despite utilizing a small amount of training data. Furthermore, we conduct additional experiments on recent RGB-D datasets, verifying the feasibility of incorporating other multi-modal datasets into 3D generation.

09.
arXiv (CS.CV) 2026-06-18

DREAM: Extending Vision-Language Models with Dual-Objective Encoding for Cross-Modal Retrieval

In today's media-driven world, the exponential growth of video content across domains such as surveillance, education, and entertainment has made retrieving semantically relevant videos via natural language queries increasingly critical. Early video retrieval systems relied on handcrafted features or shallow cross-modal mappings, limiting their ability to capture complex semantics and temporal dynamics. While large-scale vision-language models have improved cross-modal alignment, challenges remain in modeling fine-grained temporal dependencies and nuanced linguistic structures. In this paper, we introduce DREAM: Dual-path Representation Enhancement and Alignment Model, a novel multimodal framework that addresses these limitations through enhanced visual and textual encoding. DREAM incorporates a hybrid language modeling strategy that combines masked and permuted language modeling objectives to capture both local and global linguistic semantics. On the visual side, we design a hierarchical vision encoder with cascaded group attention, which integrates spatial and temporal information through multi-stage token interaction and coarse-to-fine attention refinement. We validate DREAM through comprehensive evaluations on the widely-used MSRVTT, MSVD and LSMDC benchmark datasets, where it achieves new state-of-the-art R1 scores of 49.4%, 49.7% and 27.3%, respectively. Qualitative analyses further show the model's ability to maintain coherent attention across frames and align complex queries with dynamic video content. These findings underscore the effectiveness of hierarchical attention and dual-objective textual modeling in enabling robust, context-aware video retrieval, and pave the way for future research in advancing cross-modal representation learning.

10.
arXiv (CS.CL) 2026-06-11

Which Speech Representation Better Matches Text-Native Reasoning? A Study of Speech-Text Alignment on Frame Rate and Representation

Spoken dialogue models typically start from text LLM backbones, yet reasoning often degrades when conditioning on speech instead of text. We attribute part of this modality gap to a temporal-granularity mismatch: speech tokens are temporally redundant and far longer than text under matched semantics, diluting per-token semantic density and weakening text-native reasoning dynamics. We study speech token design as a representation selection problem and sweep frame rates under a frozen LLM backbone with a fixed information rate. To make low frame rates feasible, we introduce factorized FSQ and a lightweight non-autoregressive audio LM head, scaling capacity to nearly 300\,bits/frame without sacrificing efficient prediction. With the bottleneck removed, we sweep frame rates (50$\rightarrow$2.08\,Hz) and alignment depth, and observe a consistent best regime for speech QA at 4.17\,Hz with intermediate-layer representation alignment.

11.
arXiv (CS.CV) 2026-06-18

Multi-Modal Hyper-Graph Fusion for Low-Light Crowd Counting

Crowd counting is a fundamental task in computer vision. However, crowd counting in low-light environments remains largely underexplored, despite its practical importance in the real world. Existing methods mainly focus on well-lit scenes or rely on single-modality Red-Green-Blue (RGB) representations, which often become unreliable under extreme darkness and complex non-uniform illumination. To handle this problem, we construct three new low-light crowd counting benchmarks, which consist of two synthetic datasets, SHA\_Dark and SHB\_Dark, and a real-world benchmark LC-Crowd (Low-light Crowd Dataset). Inspired by Retinex-based physical modeling, we introduce depth and Canny edge cues as complementary geometric and structural priors to enhance the intrinsic reflectance representation under low-light conditions. We propose a Multi-Modal Hyper-Graph Fusion module, which formulates RGB appearance, depth geometry, and edge structure cues as nodes in a unified hyper-graph and explicitly captures their high-order complementary relationships via dynamic hyperedge construction and message passing. Furthermore, to adaptively allocate computation in dense prediction, we propose a Deformable Rectangular Sparse Attention (DRSA) module, which concentrates computation on informative regions through anchor-aware estimation and adaptive rectangular window modeling. Based on these designs, we develop a unified Low-Light Counting Network (LCNet) for robust low-light crowd counting. Extensive experiments on three benchmarks demonstrate that the proposed method achieves the best overall performance against existing state-of-the-art (SOTA) methods. The code is in the supplementary material. The datasets will be made public upon acceptance.

12.
arXiv (CS.AI) 2026-06-19

CADBench: A Multimodal Benchmark for AI-Assisted CAD Program Generation

arXiv:2605.10873v2 Announce Type: replace-cross Abstract: Recovering editable CAD programs from images or 3D observations is central to AI-assisted design, but progress is difficult to measure because existing evaluations are fragmented across datasets, modalities, and metrics. We introduce CADBench, a unified benchmark for multimodal CAD program generation. CADBench contains 18,000 evaluation samples spanning six benchmark families derived from DeepCAD, Fusion 360, ABC, MCB, and Objaverse; five input modalities including clean meshes, noisy meshes, single-view renders, photorealistic renders, and multi-view renders; and six metrics covering geometric fidelity, executability, and program compactness. STEP-based families are stratified by B-rep face count and all families are diversity-sampled to support controlled analysis across complexity and object variation. We benchmark eleven CAD-specialized and general-purpose vision-language systems, generating more than 1.4 million CAD programs. Under idealized inputs, specialized mesh-to-CAD models substantially outperform code-generating VLMs, which remain far from reliable CAD program reconstruction. CADBench further reveals three recurring failure modes: reconstruction quality degrades with geometric complexity, CAD-specialized models can be brittle under modality shift, and model rankings change across metrics. Together, these results position CADBench as a diagnostic testbed for measuring progress in editable 3D reconstruction and multimodal CAD understanding. The benchmark is publicly available at https://github.com/anniedoris/CADBench.

13.
arXiv (CS.LG) 2026-06-18

When Does Trajectory-Level Supervision Permit Efficient Offline Reinforcement Learning?

arXiv:2606.18531v1 Announce Type: cross Abstract: Offline reinforcement learning is typically analyzed under process-level reward supervision, yet many sequential decision datasets record only trajectory-level outcomes. We develop a statistical theory for offline policy optimization from such outcome-level supervision. We first study the canonical setting where the target remains the expected cumulative reward, but each offline trajectory provides only a scalar label whose conditional mean is the cumulative return. We propose OPAC, a pessimistic actor-critic algorithm that learns a latent reward model and optimizes a policy from trajectory-level labels. We prove a high-probability guarantee of order $\widetilde O(H^2\sqrt{C_{sa}(\pi^\star)/n})$ and a matching lower bound, characterizing the sharp statistical cost of replacing process-level rewards with one trajectory-level label. We then extend the principle to preference-based feedback, preserving the leading horizon and concentrability dependence up to preference-model constants. Finally, we study generalized outcome-based offline RL, where both the supervision and the objective are trajectory-level quantities induced by a nonlinear aggregation of latent per-step rewards. This problem is not learnable in general: for all-success objectives, any offline learner may require $\Omega(2^H)$ trajectories even with deterministic transitions and constant concentrability. We then identify a tractable regime through two structural coefficients, $\kappa_\mu(\sigma)$ and $\chi_\mu(\sigma)$, capturing information loss in outcome aggregation and generalized Bellman updates, under which generalized OPAC achieves polynomial sample complexity. Together, our results delineate when outcome-level supervision enables sample-efficient offline control and when missing process-level rewards create fundamental statistical barriers.

14.
arXiv (quant-ph) 2026-06-25

The classical boundaries of the EPR argument and quantum ontology

arXiv:2606.07826v3 Announce Type: replace Abstract: Von Neumann's Hilbert-space formalism of quantum mechanics constitutes a logico-physical theory of observed or measured reality. Imposing the logical constraint of Booleanity, essential for objectively shareable descriptions among observers, reveals the physical meaning of classicality inherently embedded within the formalism itself. Starting from this consideration, the present work reformulates the quantum-classical transition via Hilbert-space classical mechanics (HCM), grounding classicality not in the dynamical limit ($\hbar \to 0$), but in the logical constraint of Booleanity (i.e., the mutual commutativity of preparable states). Within this state-centric framework, applying the Einstein-Podolsky-Rosen (EPR) criterion alongside locality and measurement independence reduces standard quantum mechanics to the HCM model. Thus, the EPR argument reveals not quantum incompleteness, but the implicit classical boundaries of its own premises. To resolve this impasse, we articulate a nuanced quantum ontology grounded in a fundamental structural bipartition between the observational environment and the observed object, which accommodates three categorical distinctions: ontic, processional, and tropos-existential. Building on this, we propose a criterion of objective reality wherein descriptive objectivity is treated as merely a sufficient condition for physical reality. This addresses the historical Bohr-Einstein ambiguity, enabling the quantum formalism to ontologically unify objective measured phenomena and non-objective observed interference within a context-dependent framework.

15.
arXiv (CS.AI) 2026-06-24

FP8 is All You Need (Part 2): Efficient Ozaki-Bailey Style FFT Through Tensor-core Garner Reformulation and Kulisch Escape Route

arXiv:2606.23698v1 Announce Type: cross Abstract: NVIDIA's Blackwell Ultra (B300) cuts FP64 vector throughput to ~1.3 TFLOPS per GPU, roughly 30x below B200 and well below the level at which bandwidth-limited FP64 workloads stay memory-bound. The Ozaki Scheme II framework recovers FP64-equivalent throughput by routing dense matrix multiply through FP8 tensor cores with a mantissa-sliced Chinese-remainder reconstruction. A companion Part (1) paper covers dense GEMM, batched GEMV, stencils, and SpMV; this paper adds the fifth canonical primitive, the 3-D FFT. We present Ozaki-Bailey FFT, an emulated 3-D FFT via the Bailey six-step decomposition with both 1-D FFT GEMMs on FP8 tensor cores. Bailey's small inner factor k ~ sqrt(N) (k=32 for N=1024) puts the kernel in the regime k

16.
arXiv (CS.LG) 2026-06-18

Hierarchical Planning with Latent World Models

arXiv:2604.03208v2 Announce Type: replace Abstract: World models are a promising path to zero-shot embodied control through planning. However, existing world model planners struggle on long-horizon, multi-stage tasks: prediction errors compound and naive search is exponential in the planning horizon. Hierarchy mitigates both by decomposing tasks into shorter, tractable subproblems; yet prior hierarchical approaches either amortize control into task-specific policies (hierarchical RL) or assume low-dimensional states and known dynamics (classical hierarchical MPC). We present Hierarchical Planning with Latent World Models (HWM), an architecture and planning paradigm for hierarchical model predictive control (MPC) directly on visual world models trained solely via next-latent prediction. HWM learns world models at multiple temporal scales within a shared latent space, so predictions from the long-horizon model serve as subgoals for the short-horizon model via latent matching, without task-specific rewards, skill learning, or hierarchical policies. To keep long-horizon search tractable, HWM learns an action encoder that compresses primitive action chunks into latent macro-actions. On real-world Franka manipulation, HWM solves pick-and-place from a single goal image at 70% success vs. 0% for single-level planning. Across simulated push manipulation and maze navigation, HWM consistently improves performance on long-horizon tasks while requiring up to 3x less planning compute.

17.
arXiv (CS.AI) 2026-06-11

MLaGA: Multimodal Large Language and Graph Assistant

arXiv:2506.02568v2 Announce Type: replace Abstract: Large Language Models (LLMs) have demonstrated substantial efficacy in advancing graph-structured data analysis. Prevailing LLM-based graph methods excel in adapting LLMs to text-rich graphs, wherein node attributes are text descriptions. However, their applications to multimodal graphs–where nodes are associated with diverse attribute types, such as texts and images–remain underexplored, despite their ubiquity in real-world scenarios. To bridge the gap, we introduce the Multimodal Large Language and Graph Assistant (MLaGA), an innovative model that adeptly extends LLM capabilities to facilitate reasoning over complex graph structures and multimodal attributes. We first design a structure-aware multimodal encoder to align textual and visual attributes within a unified space through a joint graph pre-training objective. Subsequently, we implement a multimodal instruction-tuning approach to seamlessly integrate multimodal features and graph structures into the LLM through lightweight projectors. Extensive experiments across multiple datasets demonstrate the effectiveness of MLaGA compared to leading baseline methods, achieving superior performance in diverse graph learning tasks under both supervised and transfer learning scenarios.

18.
arXiv (CS.LG) 2026-06-16

Anomaly Detection via Mean Shift Density Enhancement

arXiv:2602.03293v2 Announce Type: replace Abstract: Unsupervised anomaly detection stands as an important problem in machine learning. Existing unsupervised anomaly detection algorithms rarely perform well across different anomaly types, often excelling only under specific structural assumptions. This lack of robustness also becomes particularly evident under noisy settings. We propose Mean Shift Density Enhancement (MSDE), a fully unsupervised framework that detects anomalies through their geometric response to density-driven manifold evolution. MSDE is designed as a general purpose anomaly detection framework, based on the principle that normal samples, being well supported by local density, remain stable under iterative density enhancement, whereas anomalous samples undergo large cumulative displacements as they are attracted toward nearby density modes. To operationalize this idea, MSDE employs a weighted mean-shift procedure with adaptive, sample-specific density weights derived from a manifold learning-based fuzzy neighborhood graph. We evaluate MSDE on an anomaly detection benchmark comprising 46 real-world tabular datasets, four realistic anomaly generation mechanisms, and six noise levels. Compared to 13 established unsupervised baselines, MSDE achieves consistently strong, balanced and robust performance for several standard classification metrics, at several noise levels and on average over several types of anomalies. These results demonstrate that displacement-based scoring provides a robust alternative to the existing state-of-the-art for unsupervised anomaly detection.

19.
arXiv (CS.CL) 2026-06-12

MaxProof: Scaling Mathematical Proof with Generative-Verifier RL and Population-Level Test-Time Scaling

We present MaxProof, a population-level test-time scaling framework for competition-level mathematical proof in the MiniMax-M3 series. M3 first trains three proof-oriented capabilities – proof generation, proof verification, and critique-conditioned proof repair – using a defense-in-depth generative verifier engineered for low false-positive rate. These capabilities are merged into a single released M3 model. At test time, MaxProof treats the model as a generator, verifier, refiner, and ranker, searches over a population of candidate proofs, and returns one final proof through tournament selection. With MaxProof test-time scaling, the M3 model reaches 35/42 on IMO 2025 and 36/42 on USAMO 2026, exceeding the human gold-medal threshold on both.

20.
arXiv (quant-ph) 2026-06-19

Spatial Localization of Relativistic Quantum Systems: The Commutativity Requirement and the Locality Principle. Part II: A Model from Local QFT

arXiv:2604.04173v3 Announce Type: replace-cross Abstract: This paper is the second and final part of a two-part study. We construct positive-energy relativistic spatial localization observables in Minkowski spacetime within standard quantum field theory, using the stress–energy–momentum tensor smeared with suitable test functions. For each fixed timelike direction, the construction gives positive operator-valued measures (POVMs) on spacelike hypersurfaces, well defined on every $n$-particle sector and satisfying a relativistic causality condition excluding superluminal propagation of detection probabilities. The observables are built from local or quasi-local field-theoretic quantities, thus providing a rigorous version of earlier heuristic proposals. In the one-particle sector, the construction reduces to the observable previously introduced by the author, and its first moment gives the Newton–Wigner position operator under appropriate normalization and centering assumptions. Because the Reeh–Schlieder theorem prevents the normally ordered stress–energy–momentum tensor from being positive on the full Fock space, we use quantum energy inequalities to obtain lower bounds controlling deviations from positivity. This leads to regularized operator families, bounded from below, which approximate the localization effects. Finally, we define conditional localization observables for finite laboratories through modified local energy operators. By Haag duality, the corresponding conditional POVMs belong to local von Neumann algebras and commute for causally separated regions, in accordance with the Araki–Haag–Kastler framework. The results show how commutativity of localization observables is recovered for conditional measurements in finite spacetime regions.

21.
arXiv (CS.CV) 2026-06-11

SCAIL-2: Unifying Controlled Character Animation with End-to-end In-Context Conditioning

Controlled character animation requires transferring motion from a driving sequence to a reference character. Prior works heavily rely on intermediate representations, including pose skeletons to represent motion or masked background to represent environment, which inevitably leads to information loss. To address this, we present SCAIL-2, a framework that bypasses those intermediates and achieves end-to-end character animation. By directly concatenating driving videos to the sequence, the model can obtain all the required visual information from the input video. To address the lack of end-to-end data, we unify sub-tasks of character animation with decoupled conditions and then curate a pipeline to synthesize MotionPair-60K, an end-to-end motion transfer dataset containing heterogeneous tasks of character animation. To achieve the unification, we utilize in-context mask conditioning and mode-specific RoPE as soft guidance beyond textual instructions and raw visual information. To address synthetic discrepancy in detailed regions, we propose Bias-Aware DPO to construct preference items to mitigate the errors. Extensive experiments demonstrate that our method substantially outperforms existing state-of-the-art approaches in various character animation tasks. A large subset of synthetic data as well as model weights will be released at our project page: https://teal024.github.io/SCAIL-2/.

22.
arXiv (quant-ph) 2026-06-12

Supersymmetry of dissipative Bose-Fermi systems with application to Jaynes-Cummings and Dicke models

arXiv:2606.12682v1 Announce Type: new Abstract: We demonstrate how supersymmetries of Hamiltonians for coupled Bose-Fermi systems can be used to place the Hamiltonians of the Jaynes-Cummings model and Dicke model under the rotating wave approximation in matrix form and provide explicit analytic solutions for their eigenvalues. We then use this supersymmetry to place the Liouvillians of the associated Markovian open systems in matrix form and provide explicit solutions for their eigenvalues. These results are a consequence of the fact that the Hamiltonian of the Jaynes-Cummings model commutes with the linear Casimir invariant of the superalgebra $u(1|1)$ and that the Hamiltonian of the Dicke model commutes both with the linear invariant of $\sum_{i} u_{i}(1|1)$ and with the invariant of an additional $su(2)$ algebra. Our methods apply to various coupled Bose-Fermi systems with $u(1|1)$ and more generally with $u(n|m)$ dynamical superalgebras, and may provide efficient tools for studying more complicated examples.

23.
arXiv (CS.CV) 2026-06-25

MSAVBench: Towards Comprehensive and Reliable Evaluation of Multi-Shot Audio-Video Generation

Video generation is rapidly evolving from single-shot synthesis to complex multi-shot audio-video (MSAV) narratives to meet real-world demands. However, evaluating such frontier models remains a fundamental challenge. Existing benchmarks are limited in scope and data diversity, and rely on rigid evaluation pipelines, preventing systematic and reliable assessment of modern MSAV models. To bridge these gaps, we introduce MSAVBench, the first comprehensive benchmark and adaptive hybrid evaluation framework for multi-shot audio-video generation. Our benchmark spans four key dimensions, video, audio, shot, and reference, covering diverse task settings, varying shot counts of up to 15, and challenging non-realistic scenarios. Our evaluation framework improves robustness through an adaptive self-correction mechanism for shot segmentation, instance-wise rubrics for subjective metrics, and tool-grounded evidence extraction for complex judgments. Furthermore, MSAVBench achieves high alignment with human judgments, reaching a Spearman rank correlation of 91.5%. Our systematic evaluation of 19 state-of-the-art closed- and open-source models shows that current systems still struggle with director-level control and fine-grained audio-visual synchronization, while modular or agentic generation pipelines offer a promising path toward narrowing the gap between open- and closed-source models. The benchmark data and evaluation code are publicly available at https://github.com/ali-vilab/MSAVBench.

24.
arXiv (CS.AI) 2026-06-24

Ten Digits on a Train: AI-Assisted Verification of Two Eigenvalue Problems

arXiv:2606.23821v1 Announce Type: cross Abstract: Accurate numerical eigenvalues are often difficult to certify, especially in singular or non-normal settings. This article reports a human–AI collaboration on two such computations. For a singular self-adjoint Schrödinger operator, a verified zero count and Dirichlet–Neumann bracketing certify the complete negative spectrum to ten decimal places. For a delicate non-normal atom–molecule benchmark, a previously unresolved resonance pair is separated, with each member enclosed to ten digits. The second result is achieved not by increasing the precision of one-way shooting, but by reformulating the problem as a global matching system for projective solution lines. The infinite tail is encoded as uncertainty in the terminal projective data, and a componentwise, tail-robust Krawczyk–Brouwer inclusion supplies the certificate. This gives a reusable architecture for analytic boundary-value systems with ill-conditioned propagation and uncertain asymptotic data. The collaboration also exposes the strengths and limits of AI assistance. AI rapidly produced accurate candidates and plausible proof strategies, but several failed, including one apparently complete tail argument that omitted the componentwise check required by a nonuniform polydisc. Validated computation is a stringent test of AI-assisted mathematics: the output is not merely a number, but a number with a proof. These examples show why the proof object matters, and why human mathematical judgment remained decisive. More broadly, as AI makes code, exposition, and plausible numerical claims inexpensive, standards for verification, attribution, peer review, and training must adapt. The implications are unsettling; the opportunity is extraordinary.

25.
arXiv (CS.LG) 2026-06-11

Provable Recovery of Locally Important Signed Features and Interactions from Random Forest

arXiv:2512.11081v2 Announce Type: replace-cross Abstract: Feature and Interaction Importance (FII) methods are essential in supervised learning for assessing the relevance of input variables and their interactions in complex prediction models. In many domains, such as personalized medicine, local interpretations for individual predictions are often required, rather than global scores summarizing overall feature importance. Random Forests (RFs) are widely used in these settings, and existing interpretability methods typically exploit tree structures and split statistics to provide model-specific insights. However, theoretical understanding of local FII methods for RF remains limited, making it unclear how to interpret high importance scores for individual predictions. We propose a novel, local, model-specific FII method that identifies frequent co-occurrences of features along decision paths, combining global patterns with those observed on paths specific to a given test point. We prove that our method consistently recovers the true local signal features and their interactions under a Locally Spike Sparse (LSS) model and also identifies whether large or small feature values drive a prediction. We illustrate the usefulness of our method and theoretical results through simulation studies and a real-world data example.